=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2008.12.19 09:52:14 =~=~=~=~=~=~=~=~=~=~=~= ! S4(config)#hostname S4 S4(config)#! S4(config)#! S4(config)#username CISCO password 0 CISCO S4(config)#no aaa new-model S4(config)#ip subnet-zero S4(config)#no ip domain-lookup S4(config)#! S4(config)#interface GigabitEthernet0/12 S4(config-if)# switchport trunk encapsulation dot1q S4(config-if)# switchport mode trunk S4(config-if)#! S4(config-if)#interface GigabitEthernet0/13 S4(config-if)# switchport trunk encapsulation dot1q S4(config-if)# switchport mode trunk S4(config-if)#! S4(config-if)#interface GigabitEthernet0/15 S4(config-if)# switchport trunk encapsulation dot1q S4(config-if)# switchport mode trunk S4(config-if)#! S4(config-if)#interface GigabitEthernet0/16 S4(config-if)# switchport trunk encapsulation dot1q S4(config-if)# switchport mode trunk S4(config-if)#! S4(config-if)#interface GigabitEthernet0/20 S4(config-if)# shutdown S4(config-if)#! S4(config-if)#line con 0 S4(config-line)# exec-timeout 0 0 S4(config-line)# privilege level 15 S4(config-line)# logging synchronous S4(config-line)#line vty 0 4 S4(config-line)# password cisco S4(config-line)# login local S4(config-line)#line vty 5 15 S4(config-line)# password cisco S4(config-line)# login local S4(config-line)#! S4(config-line)#end S4#wr Building configuration... [OK] S4# 02:15:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/12, changed state to down 02:15:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down 02:15:14: %SYS-5-CONFIG_I: Configured from console by console 02:15:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/15, changed state to down 02:15:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/16, changed state to down S4# RACK98AS>10 [Resuming connection 10 to s3 ... ] 02:15:48: % 02:15:51: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/15, changed state to up 02:15:51: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/16, changed state to up S3(config)# S3(config)#! S3(config)#hostname S3 S3(config)#username CISCO password 0 CISCO S3(config)#no aaa new-model S3(config)#ip subnet-zero S3(config)#no ip domain-lookup S3(config)#! S3(config)#! S3(config)#interface GigabitEthernet0/12 S3(config-if)# switchport trunk encapsulation dot1q S3(config-if)# switchport mode trunk S3(config-if)#! S3(config-if)#interface GigabitEthernet0/13 S3(config-if)# switchport trunk encapsulation dot1q S3(config-if)# switchport mode trunk S3(config-if)#! S3(config-if)#interface GigabitEthernet0/15 S3(config-if)# switchport trunk encapsulation dot1q S3(config-if)# switchport mode trunk S3(config-if)#! S3(config-if)#interface GigabitEthernet0/16 S3(config-if)# switchport trunk encapsulation dot1q S3(config-if)# switchport mode trunk S3(config-if)#! S3(config-if)#interface GigabitEthernet0/20 S3(config-if)# shutdown S3(config-if)#! S3(config-if)#line con 0 S3(config-line)# exec-timeout 0 0 S3(config-line)# privilege level 15 S3(config-line)# logging synchronous S3(config-line)#line vty 0 4 S3(config-line)# password cisco S3(config-line)# login local S3(config-line)#line vty 5 15 S3(config-line)# password cisco S3(config-line)# login local S3(config-line)#! S3(config-line)#end S3#wr Building configuration... [OK] S3# 02:16:01: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/12, changed state to down 02:16:01: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down 02:16:01: %SYS-5-CONFIG_I: Configured from console by console S3# RACK98AS>9 [Resuming connection 9 to s2 ... ] 02:15:40: %LIN S2(config)#hostname S2 S2(config)#! S2(config)#username CISCO password 0 CISCO S2(config)#ip subnet-zero S2(config)#ip routing S2(config)#no ip domain-lookup S2(config)#! S2(config)#! Need to get R5 mac address from Fa0/1 and update this ACL S2(config)#! S2(config)#no mac access-list extended R5 S2(config)# mac access-list extended R5 S2(config-ext-macl)# permit host 001a.6d1a.3e81 any S2(config-ext-macl)#! S2(config-ext-macl)# vlan access-map R5 10 S2(config-access-map)# action drop S2(config-access-map)# match mac address R5 S2(config-access-map)# vlan access-map R5 20 S2(config-access-map)# action forward S2(config-access-map)# vlan filter R5 vlan-list 1-51,53-4094 S2(config)#! S2(config)#interface Port-channel1 S2(config-if)# switchport trunk encapsulation dot1q S2(config-if)# switchport mode trunk S2(config-if)#! S2(config-if)#interface FastEthernet0/4 S2(config-if)# switchport access vlan 174 % Access VLAN does not exist. Creating vlan 174 S2(config-if)# switchport mode access S2(config-if)#! S2(config-if)#interface FastEthernet0/5 S2(config-if)# switchport trunk encapsulation isl S2(config-if)# switchport mode trunk S2(config-if)#! S2(config-if)#interface FastEthernet0/12 S2(config-if)# switchport trunk encapsulation dot1q S2(config-if)# switchport mode trunk S2(config-if)#! S2(config-if)#interface FastEthernet0/13 S2(config-if)# switchport trunk encapsulation dot1q S2(config-if)# switchport mode trunk S2(config-if)#! S2(config-if)#interface FastEthernet0/20 S2(config-if)# switchport mode dynamic desirable S2(config-if)# shutdown S2(config-if)#! S2(config-if)#interface FastEthernet0/22 S2(config-if)# switchport trunk encapsulation dot1q S2(config-if)# switchport mode trunk S2(config-if)# channel-group 1 mode desirable S2(config-if)#! S2(config-if)#interface FastEthernet0/23 S2(config-if)# switchport trunk encapsulation dot1q S2(config-if)# switchport mode trunk S2(config-if)# channel-group 1 mode desirable S2(config-if)#! S2(config-if)#interface FastEthernet0/24 S2(config-if)# switchport trunk encapsulation dot1q S2(config-if)# switchport mode trunk S2(config-if)# channel-group 1 mode desirable S2(config-if)#! S2(config-if)#interface Vlan52 S2(config-if)# ip address 172.22.52.9 255.255.255.224 S2(config-if)# no shutdown S2(config-if)#! S2(config-if)#router ospf 1 S2(config-router)# router-id 9.9.9.9 S2(config-router)# log-adjacency-changes S2(config-router)# auto-cost reference-bandwidth 1000 % OSPF: Reference bandwidth is changed. Please ensure reference bandwidth is consistent across all routers. S2(config-router)# network 172.22.52.9 0.0.0.0 area 1 S2(config-router)#! S2(config-router)#line con 0 S2(config-line)# exec-timeout 0 0 S2(config-line)# privilege level 15 S2(config-line)# logging synchronous S2(config-line)#line vty 0 4 S2(config-line)# password cisco S2(config-line)# login local S2(config-line)#line vty 5 15 S2(config-line)# password cisco S2(config-line)# login local S2(config-line)#! S2(config-line)#end S2#wr Building configuration... 02:16:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to down 02:16:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/22, changed state to down 02:16:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/23, changed state to down[OK] S2# 02:16:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to down 02:16:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan52, changed state to down 02:16:15: %SYS-5-CONFIG_I: Configured from console by console S2# RACK98AS>8 [Resuming connection 8 to s1 ... ] 02:16:01: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/23, changed state to up 02:16:25: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to up S1(config)# S1(config)#hostname S1 S1(config)#! S1(config)#! S1(config)#username CISCO password 0 CISCO S1(config)#ip subnet-zero S1(config)#ip routing S1(config)#no ip domain-lookup S1(config)#! S1(config)#vtp domain CCIE Changing VTP domain name from NULL to CCIE S1(config)#vlan 3 S1(config-vlan)#name R3 S1(config-vlan)#vlan 174 S1(config-vlan)#name R1-7-4 S1(config-vlan)#vlan 52 S1(config-vlan)#name R5-2 S1(config-vlan)#no file verify auto S1(config)#spanning-tree mode pvst S1(config)#spanning-tree extend system-id S1(config)#interface Port-channel1 S1(config-if)# switchport trunk encapsulation dot1q S1(config-if)# switchport mode trunk S1(config-if)#! S1(config-if)#interface FastEthernet0/1 S1(config-if)# switchport access vlan 174 S1(config-if)# switchport mode access S1(config-if)# l2protocol-tunnel cdp S1(config-if)# no cdp enable S1(config-if)#! S1(config-if)#interface FastEthernet0/2 S1(config-if)# switchport access vlan 52 S1(config-if)# switchport mode access S1(config-if)#! S1(config-if)#interface FastEthernet0/3 S1(config-if)# switchport access vlan 3 S1(config-if)# switchport mode access S1(config-if)#! S1(config-if)#interface FastEthernet0/4 S1(config-if)# switchport mode dynamic desirable S1(config-if)#! S1(config-if)#interface FastEthernet0/5 S1(config-if)# switchport mode dynamic desirable S1(config-if)#! S1(config-if)#interface FastEthernet0/6 S1(config-if)# switchport mode dynamic desirable S1(config-if)#! S1(config-if)#interface FastEthernet0/7 S1(config-if)# switchport access vlan 174 S1(config-if)# switchport mode access S1(config-if)# l2protocol-tunnel cdp S1(config-if)# no cdp enable S1(config-if)#! S1(config-if)#interface FastEthernet0/12 S1(config-if)# switchport trunk encapsulation dot1q S1(config-if)# switchport mode trunk S1(config-if)#! S1(config-if)#interface FastEthernet0/13 S1(config-if)# switchport trunk encapsulation dot1q S1(config-if)# switchport mode trunk S1(config-if)#! S1(config-if)#interface FastEthernet0/20 S1(config-if)# switchport mode dynamic desirable S1(config-if)# shutdown S1(config-if)#! S1(config-if)#interface FastEthernet0/22 S1(config-if)# switchport trunk encapsulation dot1q S1(config-if)# switchport mode trunk S1(config-if)# channel-group 1 mode desirable S1(config-if)#! S1(config-if)#interface FastEthernet0/23 S1(config-if)# switchport trunk encapsulation dot1q S1(config-if)# switchport mode trunk S1(config-if)# channel-group 1 mode desirable S1(config-if)#! S1(config-if)#interface FastEthernet0/24 S1(config-if)# switchport trunk encapsulation dot1q S1(config-if)# switchport mode trunk S1(config-if)# channel-group 1 mode desirable S1(config-if)#! S1(config-if)#interface Vlan174 S1(config-if)# ip address 172.22.174.8 255.255.255.192 S1(config-if)# no shutdown S1(config-if)#! S1(config-if)#router eigrp 174 S1(config-router)# network 172.22.0.0 S1(config-router)# no auto-summary S1(config-router)#! S1(config-router)#line con 0 S1(config-line)# exec-timeout 0 0 S1(config-line)# privilege level 15 S1(config-line)# logging synchronous S1(config-line)#line vty 0 4 S1(config-line)# password cisco S1(config-line)# login local S1(config-line)#line vty 5 15 S1(config-line)# password cisco S1(config-line)# login local S1(config-line)#! S1(config-line)#end S1#wr Building configuration... [OK] S1# 02:16:42: %SYS-5-CONFIG_I: Configured from console by console 02:16:42: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/22, changed state to down 02:16:42: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/23, changed state to down 02:16:42: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to down 02:16:42: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan174, changed state to down S1# 02:16:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/23, changed state to up 02:16:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to up 02:16:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/22, changed state to up S1# 02:16:46: %LINK-3-UPDOWN: Interface Port-channel1, changed state to up 02:16:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel1, changed state to up S1#config t Enter configuration commands, one per line. End with CNTL/Z. S1(config)#clust S1(config)#cluster en S1(config)#cluster enable cci CCIE S1(config)# RACK98AS>11 [Resuming connection 11 to s4 ... ] 02:15:17: %L S4#sh ver Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Fri 28-Jul-06 12:34 by yenanh Image text-base: 0x00003000, data-base: 0x012237D0 ROM: Bootstrap program is C3560 boot loader BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEE4, RELEASE SOFTWARE (fc1) S4 uptime is 2 hours, 16 minutes System returned to ROM by power-on System image file is "flash:/c3560-ipservices-mz.122-25.SEE2/c3560-advipservicesk9-mz.122-25.SEE2.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable --More-- to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco WS-C3560G-24PS (PowerPC405) processor (revision F0) with 118784K/12280K bytes of memory. Processor board ID FOC1051Y629 Last reset from power-on 1 Virtual Ethernet interface 28 Gigabit Ethernet interfaces The password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address : 00:1A:A2:1B:E3:00 Motherboard assembly number : 73-10213-04 Power supply part number : 341-0108-03 Motherboard serial number : FOC105122JD Power supply serial number : DCA1046A22X Model revision number : F0 --More-- Motherboard revision number : B0 Model number : WS-C3560G-24PS-E System serial number : FOC1051Y629 Top Assembly Part Number : 800-27478-01 Top Assembly Revision Number : A0 Version ID : V05 CLEI Code Number : CNMW300ARC Hardware Board Revision Number : 0x09 Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 28 WS-C3560G-24PS 12.2(25)SEE2 C3560-ADVIPSERVICESK Configuration register is 0xF S4# RACK98AS>8 [Resuming connection 8 to s1 ... ] 02:17:10: %LINEP S1(config)#clus S1(config)#cluster m S1(config)#cluster member m S1(config)#cluster member mac-address 00:1A:A2:1B:E3:00 S1(config)# RACK98AS>10 [Resuming connection 10 to s3 ... ] 02:16:04: %L S3#sh ver Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Fri 28-Jul-06 12:34 by yenanh Image text-base: 0x00003000, data-base: 0x012237D0 ROM: Bootstrap program is C3560 boot loader BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEE4, RELEASE SOFTWARE (fc1) S3 uptime is 2 hours, 17 minutes System returned to ROM by power-on System image file is "flash:/c3560-ipservices-mz.122-25.SEE2/c3560-advipservicesk9-mz.122-25.SEE2.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable --More-- to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco WS-C3560G-24PS (PowerPC405) processor (revision F0) with 118784K/12280K bytes of memory. Processor board ID FOC1051Y642 Last reset from power-on 1 Virtual Ethernet interface 28 Gigabit Ethernet interfaces The password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address : 00:1A:A2:1B:E3:80 Motherboard assembly number : 73-10213-04 Power supply part number : 341-0108-03 Motherboard serial number : FOC105122KS Power supply serial number : DCA1046A248 Model revision number : F0 --More-- S3# RACK98AS>8 [Resuming connection 8 to s1 ... ] S1(config)#cl S1(config)#clu S1(config)#cluster m S1(config)#cluster member m S1(config)#cluster member mac-address 00:1A:A2:1B:E3:80 S1(config)# RACK98AS>9 [Resuming connection 9 to s2 ... ] 02:16:17: %LI S2#sh ver Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Fri 28-Jul-06 12:20 by yenanh Image text-base: 0x00003000, data-base: 0x00DC0AC4 ROM: Bootstrap program is C3550 boot loader S2 uptime is 2 hours, 17 minutes System returned to ROM by power-on System image file is "flash:/c3550-ipservices-mz.122-25.SEB4/c3550-ipservicesk9-mz.122-25.SEE2.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. --More-- A summary of U.S. laws governing Cisco cryptographic products may be found at: --More-- http://www.cisco.com/wwl/export/crypto/tool/stqrg.html --More-- --More-- If you require further assistance please contact us by sending email to --More-- export@cisco.com. --More-- --More-- Cisco WS-C3550-24 (PowerPC) processor (revision R0) with 65526K/8192K bytes of memory. --More-- Processor board ID CAT1018N161 --More-- Last reset from warm-reset --More-- Running Layer2/3 Switching Image --More-- --More-- Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces --More-- --More-- Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces --More-- Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE 802.3 interface Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE 802.3 interface 24 FastEthernet interfaces 2 Gigabit Ethernet interfaces The password-recovery mechanism is enabled. 384K bytes of flash-simulated NVRAM. Base ethernet MAC Address: 00:17:E0:6F:14:80 Motherboard assembly number: 73-5700-12 Power supply part number: 34-0966-04 Motherboard serial number: CAT10171Y0X Power supply serial number: DTH10156X53 Model revision number: R0 Motherboard revision number: A0 Model number: WS-C3550-24-EMI System serial number: CAT1018N161 Configuration register is 0x10F S2# RACK98AS>8 [Resuming connection 8 to s1 ... ] S1(config)#clus S1(config)#cluster m S1(config)#cluster member m S1(config)#cluster member mac-address 00:17:E0:6F:14:80 S1(config)#clu S1(config)#cluster ru S1(config)#cluster run S1(config)#do sh ru n | i clust cluster enable CCIE 0 cluster member 1 mac-address 001a.a21b.e300 cluster member 2 mac-address 001a.a21b.e380 cluster member 3 mac-address 0017.e06f.1480 S1(config)# RACK98AS>c7 Translating "c7" Translating "c7" % Unknown command or computer name, or unable to find computer address RACK98AS> [Resuming connection 8 to s1 ... ] S1(config)# RACK98AS>7 [Resuming connection 7 to r7 ... ] R7-FS(config)#! R7-FS(config)#hostname R7-FS R7-FS(config)#! R7-FS(config)#ip cef R7-FS(config)#no ip domain lookup R7-FS(config)# R7-FS(config)#class-map match-all af13 R7-FS(config-cmap)# match ip dscp af13 R7-FS(config-cmap)#class-map match-all af22 R7-FS(config-cmap)# match ip dscp af22 R7-FS(config-cmap)#class-map match-all prec1 R7-FS(config-cmap)# match ip precedence 1 R7-FS(config-cmap)#class-map match-all prec2 R7-FS(config-cmap)# match ip precedence 2 R7-FS(config-cmap)#! R7-FS(config-cmap)#policy-map test R7-FS(config-pmap)# class af22 R7-FS(config-pmap-c)# class af13 R7-FS(config-pmap-c)# class prec1 R7-FS(config-pmap-c)# class prec2 R7-FS(config-pmap-c)#! R7-FS(config-pmap-c)#frame-relay switching R7-FS(config)#! R7-FS(config)#interface Loopback0 R7-FS(config-if)# ip address 172.22.87.1 255.255.255.0 R7-FS(config-if)#! R7-FS(config-if)#interface Loopback99 R7-FS(config-if)# ip address 1.1.1.1 255.255.255.255 R7-FS(config-if)#! R7-FS(config-if)#interface FastEthernet0/0 R7-FS(config-if)# ip address 172.22.174.7 255.255.255.192 R7-FS(config-if)# service-policy input test R7-FS(config-if)# speed auto R7-FS(config-if)# duplex auto R7-FS(config-if)# no shutdown R7-FS(config-if)#! R7-FS(config-if)#interface FastEthernet0/1 R7-FS(config-if)# shutdown R7-FS(config-if)#! R7-FS(config-if)#interface Serial1/0 R7-FS(config-if)# description To R1 Serial 0/0 R7-FS(config-if)# no ip address R7-FS(config-if)# encapsulation frame-relay R7-FS(config-if)# no fair-queue R7-FS(config-if)# clock rate 128000 R7-FS(config-if)# frame-relay intf-type dce R7-FS(config-if)# frame-relay route 122 interface Serial1/1 221 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 123 interface Serial1/2 321 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 124 interface Serial1/3 421 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 125 interface Serial1/4 521 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 126 interface Serial1/5 621 Can't use same dlci on overlapping circuits R7-FS(config-if)# no shutdown R7-FS(config-if)#! R7-FS(config-if)#interface Serial1/1 R7-FS(config-if)# description To R2 Serial 0/0 R7-FS(config-if)# no ip address R7-FS(config-if)# encapsulation frame-relay R7-FS(config-if)# no fair-queue R7-FS(config-if)# clock rate 128000 R7-FS(config-if)# frame-relay intf-type dce R7-FS(config-if)# frame-relay route 221 interface Serial1/0 122 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 223 interface Serial1/2 322 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 224 interface Serial1/3 422 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 225 interface Serial1/4 522 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 226 interface Serial1/5 622 Can't use same dlci on overlapping circuits R7-FS(config-if)# no shutdown R7-FS(config-if)#! R7-FS(config-if)#interface Serial1/2 R7-FS(config-if)# description To R3 Serial 0/0/0 R7-FS(config-if)# no ip address R7-FS(config-if)# encapsulation frame-relay R7-FS(config-if)# no fair-queue R7-FS(config-if)# clock rate 128000 R7-FS(config-if)# frame-relay intf-type dce R7-FS(config-if)# frame-relay route 321 interface Serial1/0 123 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 322 interface Serial1/1 223 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 324 interface Serial1/3 423 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 325 interface Serial1/4 523 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 326 interface Serial1/5 623 Can't use same dlci on overlapping circuits R7-FS(config-if)# no shutdown R7-FS(config-if)#! R7-FS(config-if)#interface Serial1/3 R7-FS(config-if)# description To R4 Serial 0/0/0 R7-FS(config-if)# no ip address R7-FS(config-if)# encapsulation frame-relay R7-FS(config-if)# no fair-queue R7-FS(config-if)# clock rate 128000 R7-FS(config-if)# f *Mar 5 16:33:13.153: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to uprame-relay intf-type dce R7-FS(config-if)# frame-relay route 421 interface Serial1/0 124 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 422 interface Serial1/1 224 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 423 interface Serial1/2 324 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 425 interface Serial1/4 524 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 426 interface Serial1/5 624 Can't use same dlci on overlapping circuits R7-FS(config-if)# no shutdown R7-FS(config-if)#! R7-FS(config-if)#interface Serial1/4 R7-FS(config-if)# description To R5 Serial 1/0 R7-FS(config-if)# no ip address R7-FS(config-if)# encapsulation frame-relay R7-FS(config-if)# no fair-queue R7-FS(config-if)# clock rate 128000 R7-FS(config-if)# frame-relay intf-type dce R7-FS(config-if)# frame-relay route 521 interface Serial1/0 125 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 522 interface Serial1/1 225 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 523 interface Serial1/2 325 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 524 interface Serial1/3 425 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 526 interface Serial1/5 625 Can't use same dlci on overlapping circuits R7-FS(config-if)# no shutdown R7-FS(config-if)#! R7-FS(config-if)#interface Serial1/5 R7-FS(config-if)# description To R6 Serial 0/0/0 R7-FS(config-if)# no ip address R7-FS(config-if)# encapsulation frame-relay R7-FS(config-if)# no fair-queue R7-FS(config-if)# clock rate 128000 R7-FS(config-if)# frame-relay intf-type dce R7-FS(config-if)# frame-relay route 621 interface Serial1/0 126 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 622 interface Serial1/1 226 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 623 interface Serial1/2 326 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 624 interface Serial1/3 426 Can't use same dlci on overlapping circuits R7-FS(config-if)# frame-relay route 625 interface Serial1/4 526 Can't use same dlci on overlapping circuits R7-FS(config-if)# no shutdown R7-FS(config-if)#! R7-FS(config-if)#interface Serial1/6 R7-FS(config-if)# shutdown R7-FS(config-if)#! R7-FS(config-if)#interface Serial1/7 R7-FS(config-if)# shutdown R7-FS(config-if)#! R7-FS(config-if)#router eigrp 174 R7-FS(config-router)# network 172.22.0.0 R7-FS(config-router)# no auto-summary R7-FS(config-router)#! R7-FS(config-router)#line con 0 R7-FS(config-line)# exec-timeout 0 0 R7-FS(config-line)# privilege level 15 R7-FS(config-line)# logging synchronous R7-FS(config-line)#line aux 0 R7-FS(config-line)#line vty 0 4 R7-FS(config-line)# password cisco R7-FS(config-line)# login R7-FS(config-line)#! R7-FS(config-line)#end R7-FS#wr Building configuration... *Mar 5 16:33:18.498: %SYS-5-CONFIG_I: Configured from console by console *Mar 5 16:33:21.118: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up RACK98AS>1 [Resuming connection 1 to r1 ... ] R1(config)#! R1(config)#hostname R1 R1(config)#ip cef R1(config)#no ip domain lookup R1(config)#! R1(config)#ipv6 unicast-routing R1(config)#! R1(config)#username R5 password 0 BluesBrothers R1(config)#! R1(config)#interface Loopback0 R1(config-if)# ip address 172.22.81.1 255.255.255.0 R1(config-if)#! R1(config-if)#interface Loopback1 R1(config-if)# no ip address R1(config-if)# ipv6 address 2006:1:1::/128 R1(config-if)# ipv6 ospf 1 area 0 R1(config-if)#! R1(config-if)#interface Loopback2 R1(config-if)# description To inject into OSPFv3 for the prefix to R5 R1(config-if)# ip address 199.199.199.1 255.255.255.0 R1(config-if)#! R1(config-if)#interface Loopback100 R1(config-if)# description for BGP announce R1(config-if)# ip address 131.108.1.1 255.255.255.0 R1(config-if)#! R1(config-if)#interface FastEthernet0/0 R1(config-if)# ip address 172.22.174.1 255.255.255.192 R1(config-if)# ip policy route-map Telnet-PBR R1(config-if)# duplex auto R1(config-if)# speed auto R1(config-if)#! R1(config-if)#interface Serial0/0 R1(config-if)# no ip address R1(config-if)# encapsulation frame-relay R1(config-if)#! R1(config-if)#interface Serial0/0.1 multipoint R1(config-subif)# bandwidth 128 R1(config-subif)# ip address 172.22.142.1 255.255.255.0 R1(config-subif)# ip ospf message-digest-key 1 md5 CISCO R1(config-subif)# ip ospf network point-to-multipoint R1(config-subif)# ip ospf hello-interval 60 R1(config-subif)# ipv6 address 2005:124:124::1/64 R1(config-subif)# ipv6 address FE80::1 link-local R1(config-subif)# ipv6 nat R1(config-subif)# ipv6 ospf network point-to-point R1(config-subif)# ipv6 ospf 1 area 124 R1(config-subif)# frame-relay map ipv6 FE80::2 122 broadcast R1(config-subif)# frame-relay map ip 172.22.142.1 122 R1(config-subif)# frame-relay map ip 172.22.142.2 122 broadcast R1(config-subif)# frame-relay map ip 172.22.142.4 122 R1(config-subif)# frame-relay map ipv6 2005:124:124::2 122 broadcast R1(config-subif)# 02:15:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback1, changed state to up 02:15:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback2, changed state to up 02:15:48: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback100, changed state to up frame-relay map ipv6 2005:124:124::4 122 R1(config-subif)#! R1(config-subif)#interface Serial0/0.2 point-to-point R1(config-subif)# frame-relay interface-dlci 125 ppp Virtual-Template1 R1(config-fr-dlci)#! R1(config-fr-dlci)#interface Virtual-Template1 R1(config-if)# bandwidth 64 R1(config-if)# ip address 172.22.51.1 255.255.255.252 R1(config-if)# ip 02:15:49: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up 02:15:49: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, changed state to up bandwidth-percent eigrp 174 100 R1(config-if)# ip hello-interval eigrp 174 10 R1(config-if)# ip hold-time eigrp 174 30 R1(config-if)# ipv6 nat R1(config-if)# ppp authentication chap R1(config-if)#! R1(config-if)#router eigrp 174 R1(config-router)# redistribute ospf 1 metric 32 2000 255 1 1500 route-map No$te ospf 1 metric 32 2000 255 1 1500 route-map NoE igrp R1(config-router)# passive-interface Serial0/0 R1(config-router)# passive-interface Loopback0 R1(config-router)# network 172.22.0.0 R1(config-router)# network 199.199.199.1 0.0.0.0 R1(config-router)# distance eigrp 90 90 R1(config-router)# no auto-summary R1(config-router)# eigrp router-id 172.22.81.1 R1(config-router)#! R1(config-router)#router ospf 1 R1(config-router)# router-id 1.1.1.1 R1(config-router)# log-adjacency-changes R1(config-router)# auto-cost reference-bandwidth 1000 % OSPF: Reference bandwidth is changed. Please ensure reference bandwidth is consistent across all routers. R1(config-router)# area 0 authentication message-digest R1(config-router)# timers throttle spf 5000 60000 60000 R1(config-router)# redistribute eigrp 174 metric 10000 metric-type 1 subnets R1(config-router)# network 172.22.142.1 0.0.0.0 area 0 R1(config-router)# distance ospf external 89 R1(config-router)#! R1(config-router)#router bgp 124 R1(config-router)# no synchronization R1(config-router)# bgp router-id 1.1.1.1 R1(config-router)# bgp log-neighbor-changes R1(config-router)# bgp confederation identifier 4321 R1(config-router)# bgp confederation peers 300 R1(config-router)# timers bgp 300 900 R1(config-router)# redistribute connected route-map intoBGP R1(config-router)# neighbor 172.22.82.1 remote-as 124 R1(config-router)# neighbor 172.22.82.1 update-source Loopback0 R1(config-router)# neighbor 172.22.82.1 advertisement-interval 300 R1(config-router)# no auto-summary R1(config-router)#! R1(config-router)#ip access-list standard R6Loop0 R1(config-std-nacl)# permit 172.22.86.0 R1(config-std-nacl)#! R1(config-std-nacl)#ip access-list extended Telnet-PBR R1(config-ext-nacl)# permit tcp host 172.22.87.1 host 172.22.82.1 eq telnet R1(config-ext-nacl)# permit tcp host 172.22.87.1 eq telnet host 172.22.82.1 R1(config-ext-nacl)#! R1(config-ext-nacl)#ipv6 router ospf 1 R1(config-rtr)# router-id 1.1.1.1 R1(config-rtr)# log-adjacency-changes R1(config-rtr)# area 124 virtual-link 4.4.4.4 R1(config-rtr)# distribute-list prefix-list NATPT out connected R1(config-rtr)# redistribute connected R1(config-rtr)#! R1(config-rtr)#ipv6 nat v4v6 source 172.22.52.5 2006:5:5::5 R1(config)# 02:15:55: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 174: Neighbor 172.22.174.7 (FastEthernet0/0) is up: new adjacency 02:15:55: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 174: Neighbor 172.22.174.7 (FastEthernet0/0) is resync: summary configured 02:15:55: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 174: Neighbor 172.22.174.8 (FastEthernet0/0) is up: new adjacencyipv6 nat v6v4 source list NATPT pool MyPool R1(config)#ipv6 nat v6v4 pool MyPool 199.199.199.2 199.199.199.100 prefix-len$v4 pool MyPool 199.199.199.2 199.199.199.100 prefix-leng th 24 R1(config)#ipv6 nat prefix 2006:5:5::/96 R1(config)#! R1(config)#! R1(config)#ipv6 prefix-list NATPT seq 5 permit 2006:5:5::/96 R1(config)#route-map intoBGP permit 10 R1(config-route-map)# match interface Loopback100 R1(config-route-map)#! R1(config-route-map)#route-map Telnet-PBR permit 10 R1(config-route-map)# match ip address Telnet-PBR R1(config-route-map)# set ip next-hop 172.22.51.2 R1(config-route-map)#! R1(config-route-map)#route-map NoEigrp permit 10 R1(config-route-map)# match ip address R6Loop0 R1(config-route-map)#! R1(config-route-map)#route-map NoEigrp deny 20 R1(config-route-map)# match tag 6 R1(config-route-map)#! R1(config-route-map)#route-map NoEigrp permit 30 R1(config-route-map)#! R1(config-route-map)#ipv6 access-list NATPT R1(config-ipv6-acl)# 0 02:15:57: %OSPFv3-3-RECONF_VL: OSPF process 1 is changing router-id. Reconfigure virtual link neighbors with our new router-id R1(config-ipv6-acl)# 0 02:16:05: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 174: Neighbor 172.22.174.8 (FastEthernet0/0) is down: route configuration changed 02:16:05: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 174: Neighbor 172.22.174.7 (FastEthernet0/0) is down: route configuration changed R1(config-ipv6-acl)# 02:16:09: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 174: Neighbor 172.22.174.7 (FastEthernet0/0) is up: new adjacency 02:16:10: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 174: Neighbor 172.22.174.8 (FastEthernet0/0) is up: new adjacency R1(config-ipv6-acl)# R1(config-ipv6-acl)#ipv6 access-list NATPT R1(config-ipv6-acl)# permit ipv6 any any R1(config-ipv6-acl)#! R1(config-ipv6-acl)#line con 0 R1(config-line)# exec-timeout 0 0 R1(config-line)# privilege level 15 R1(config-line)# logging synchronous R1(config-line)#line aux 0 R1(config-line)#line vty 0 4 R1(config-line)# password cisco R1(config-line)# login R1(config-line)#line vty 5 15 R1(config-line)# password cisco R1(config-line)# login R1(config-line)#! R1(config-line)#end R1#wr Building configuration... 02:16:14: %SYS-5-CONFIG_I: Configured from console by console RACK98AS>2 [Resuming connection 2 to r2 ... ] R2(config)#! R2(config)#hostname R2 R2(config)#! R2(config)#ip cef R2(config)#! R2(config)#no ip domain lookup R2(config)#! R2(config)#ipv6 unicast-routing R2(config)#! R2(config)#interface Loopback0 R2(config-if)# ip address 172.22.82.1 255.255.255.128 R2(config-if)# ip rip advertise 60 R2(config-if)# ip ospf 1 area 0 R2(config-if)#! R2(config-if)#interface Loopback1 R2(config-if)# no ip address R2(config-if)# ipv6 address 2006:2:2::/128 R2(config-if)# ipv6 rip R2 enable R2(config-if)#! R2(config-if)#interface Tunnel0 R2(config-if)# no ip address R2(config-if)# ipv6 address 2005:26:26::2/64 R2(config-if)# ipv6 rip R2 enable R2(config-if)# keepalive 10 3 R2(config-if)# tunnel source Serial0/2 R2(config-if)# tunnel destination 172.22.62.6 R2(config-if)# tunnel mode ipv6ip R2(config-if)# no shutdown R2(config-if)#! R2(config-if)#interface FastEthernet0/0 R2(config-if)# ip address 172.22.52.2 255.255.255.224 R2(config-if)# ip rip advertise 60 R2(config-if)# ip ospf 1 area 1 R2(config-if)# speed auto R2(config-if)# duplex auto R2(config-if)# no shutdown R2(config-if)#! R2(config-if)#interface Serial0/0 R2(config-if)# no ip address R2(config-if)# encapsulation frame-relay R2(config-if)# no fair-queue R2(config-if)# no frame-relay inverse-arp R2(config-if)# no shutdown R2(config-if)#! R2(config-if)#interface Serial0/0.1 point-to-point R2(config-subif)# ip address 172.22.32.2 255.255.255.0 R2(config-subif)# ip rip advertise 60 R2(config-subif)# ipv6 address 2005:23:23::2/64 R2(config-subif)# ipv6 address FE80::2 link-local R2(config-subif)# ipv6 ospf network non-broadcast R2(config-subif)# ipv6 ospf 1 area 23 R2(config-subif)# frame-relay interface-dlci 223 R2(config-fr-dlci)# no shutdown R2(config-subif)#! R2(config-subif)#interface Serial0/0.2 multipoint R2(config-subif)# 02:16:29: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback1, changed state to up 02:16:29: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to up ip address 172.22.142.2 255.255.255.0 R2(config-subif)# ip rip advertise 60 R2(config-subif)# ip ospf message-digest-key 1 md5 CISCO R2(config-subif)# ip ospf network point-to-multipoint R2(config-subif)# ip ospf hello-interval 60 R2(config-subif)# ip ospf 1 area 0 R2(config-subif)# ipv6 address 2005:124:124::2/64 R2(config-subif)# ipv6 address FE80::2 link-local R2(config-subif)# ipv6 ospf network point-to-multipoint R2(config-subif)# ipv6 ospf hello 10 R2(config-subif)# ipv6 ospf 1 area 124 R2(config-subif)# frame-relay map ipv6 FE80::4 224 broadcast R2(config-subif)# frame-relay map ip 172.22.142.1 221 broadcast R2(config-subif)# frame-relay map ip 172.22.142.4 224 broadcast R2(config-subif)# frame-relay map ipv6 2005:124:124::1 221 broadcast R2(config-subif)# frame-relay map ipv6 2005:124:124::4 224 broadcast R2(config-subif)# frame-relay map ipv6 FE80::1 221 broadcast R2(config-subif)# no shutdown R2(config-subif)#! R2(config-subif)#interface FastEthernet0/1 R2(config-if)# shutdown R2(config-if)#! R2(config-if)#interface Serial0/1 R2(config-if)# shutdown R2(config-if)#! R2(config-if)#interface Serial0/2 R2(config-if)# ip address 172.22.62.2 255.255.255.0 R2(config-if)# ip rip advertise 60 R2(config-if)# clock rate 128000 R2(config-if)# no shutdown R2(config-if)#! R2(config-if)#router ospf 1 R2(config-router)# router-id 2.2.2.2 R2(config-router)# log-adjacency-changes R2(config-router)# auto-cost reference-bandwidth 1000 % OSPF: Reference bandwidth is changed. Please ensure reference bandwidth is consistent across all routers. R2(config-router)# area 0 authentication message-digest R2(config-router)# area 0 range 172.22.84.0 255.255.254.0 R2(config-router)# area 1 virtual-link 5.5.5.5 message-digest-key 1 md5 CISCO R2(config-router)# timers throttle spf 6000 6000 6000 R2(config-router)# redistribute rip metric-type 1 subnets tag 2 route-map Fro$te rip metric-type 1 subnets tag 2 route-map From R6 R2(config-router)# distance ospf external 121 R2(config-router)#! R2(config-router)#router rip R2(config-router)# version 2 R2(config-router)# timers basic 60 240 240 300 R2(config-router)# redistribute ospf 1 metric 2 R2(config-router)# passive-interface FastEthernet0/0 R2(config-router)# passive-interface Serial0/0.2 R2(config-router)# output-delay 24 R2(config-router)# network 172.22.0.0 R2(config-router)# distribute-list 100 in Serial0/2 R2(config-router)# no auto-summary R2(config-router)#! R2(config-router)#router bgp 124 R2(config-router)# no synchronization R2(config-router)# bgp router-id 2.2.2.2 R2(config-router)# bgp log-neighbor-changes R2(config-router)# bgp confederation identifier 4321 R2(config-router)# bgp confederation peers 300 R2(config-router)# bgp dampening route-map R3Routes R2(config-router)# timers bgp 300 900 R2(config-router)# neighbor 172.22.32.3 remote-as 300 R2(config-router)# neighbor 172.22.81.1 remote-as 124 R2(config-router)# neighbor 172.22.81.1 update-source Loopback0 R2(config-router)# neighbor 172.22.81.1 route-reflector-client R2(config-router)# neighbor 172.22.142.4 remote-as 124 R2(config-router)# neighbor 172.22.142.4 route-reflector-client R2(config-router)# no auto-summary R2(config-router)#! R2(config-router)#ip access-list standard R6 R2(config-std-nacl)# permit 172.22.62.6 R2(config-std-nacl)#! R2(config-std-nacl)#ip prefix-list R3Routes seq 5 permit 172.22.33.0/24 R2(config)#ip prefix-list R3Routes seq 10 permit 172.22.83.0/24 R2(config)#! R2(config)#access-list 100 deny ip host 172.22.62.6 0.1.1.0 255.254.254.255 R2(config)#access-list 100 permit ip any any R2(config)#ipv6 router ospf 1 R2(config-rtr)# router-id 2.2.2.2 Reload or use "clear ipv6 ospf process" command, for this to take effect R2(config-rtr)# log-adjacency-changes R2(config-rtr)# redistribute rip R2 include-connected R2(config-rtr)#! R2(config-rtr)#ipv6 router rip R2 R2(config-rtr)# redistribute connected R2(config-rtr)# redistribute ospf 1 metric 2 R2(config-rtr)# 02:16:32: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Serial0/0.2 from LOADING to FULL, Loading Done! R2(config-rtr)#route-map R3Routes permit 10 R2(config-route-map)# match ip address prefix-list R3Routes R2(config-route-map)# set dampening 15 750 4000 60 R2(config-route-map)#! R2(config-route-map)#route-map R3Routes permit 20 R2(config-route-map)#! R 02:16:34: %OSPFv3-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Serial0/0.2 from LOADING to FULL, Loading Done2(config-route-map)#route-map FromR6 permit 10 R2(config-route-map)# match ip route-source R6 R2(config-route-map)# match metric 1 R2(config-route-map)# set tag 6 R2(config-route-map)#! R2(config-route-map)#route-map FromR6 permit 20 R2(config-route-map)#! R2(config-route-map)#line con 0 R2(config-line)# exec-timeout 0 0 R2(config-line)# privilege level 15 R2(config-line)# logging synchronous R2(config-line)#line aux 0 R2(config-line)#line vty 0 4 R2(config-line)# passwordpassword c 02:16:41: %OSPF-5-ADJCHG: Process 1, Nbr 9.9.9.9 on FastEthernet0/0 from LOADING to FULL, Loading Done R2(config-line)# R2(config-line)#line con 0 R2(config-line)# exec-timeout 0 0 R2(config-line)# privilege level 15 R2(config-line)# logging synchronous R2(config-line)#line aux 0 R2(config-line)#line vty 0 4 R2(config-line)# password cisco R2(config-line)# login R2(config-line)#line vty 5 15 R2(config-line)# password cisco R2(config-line)# login R2(config-line)#! R2(config-line)#end R2#wr Building configuration... RACK98AS>3 [Resuming connection 3 to r3 ... ] nfig)# R3(config)# R R3(config)#! R3(config)#hostname R3 R3(config)#ip cef R3(config)#! R3(config)#! R3(config)#no ip domain lookup R3(config)#! R3(config)#ipv6 unicast-routing R3(config)#! R3(config)#interface Loopback0 R3(config-if)# ip address 172.22.83.1 255.255.255.0 R3(config-if)# ip rip advertise 60 R3(config-if)#! R3(config-if)#interface Loopback1 R3(config-if)# no ip address R3(config-if)# ipv6 address 2006:3:3::/128 R3(config-if)# ipv6 ospf 1 area 0 R3(config-if)#! R3(config-if)#interface Tunnel0 R3(config-if)# no ip address R3(config-if)# ipv6 address 2005:34:34::3/64 R3(config-if)# ipv6 ospf 1 area 0 R3(config-if)# keepalive 10 3 R3(config-if)# tunnel source Loopback0 R3(config-if)# tunnel destination 172.22.84.1 R3(config-if)# tunnel mode ipv6ip R3(config-if)# no shutdown R3(config-if)#! R3(config-if)#interface FastEthernet0/0 R3(config-if)# ip address 172.22.33.3 255.255.255.0 R3(config-if)# ip rip advertise 60 R3(config-if)# speed auto R3(config-if)# duplex auto R3(config-if)# ipv6 address 2005:3:3::3/64 R3(config-if)# ipv6 ospf 1 area 23 R3(config-if)# no shutdown R3(config-if)#! R3(config-if)#interface FastEthernet0/1 R3(config-if)# shutdown R3(config-if)#! R3(config-if)#interface Serial0/0/0 R3(config-if)# ip address 172.22.32.3 255.255.255.0 R3(config-if)# ip rip advertise 60 R3(config-if)# encapsulation frame-relay R3(config-if)# ipv6 address 2005:23:23::3/64 R3(config-if)# ipv6 address FE80::3 link-local R3(config-if)# ipv6 ospf neighbor FE80::2 R3(config-if)# ipv6 ospf 1 area 23 R3(config-if)# frame-relay map ipv6 FE80::2 322 broadcast R3(config-if)# frame-relay map ip 172.22.32.2 322 broadcast R3(config-if)# frame-relay map ipv6 2005:23:23::2 322 broadcast R3(config-if)# no frame-relay inverse-arp R3(config-if)# no shutdown R3(config-if)#! R3(config-if)#interface Serial0/0/1 R3(config-if)# shutdown R3(config-if)#! R3(config-if)#interface Serial0/1/0 R3(config-if)# ip address 172.22.63.3 255.255.255.0 R3(config-if)# ip rip advertise 60 R3(config-if)# clock rate 128000 R3(config-if)# no shutdown R3(config-if)#! R3(config-if)#router rip R3(config-router)# version 2 R3(config-router)# timers basic 60 240 240 300 R3(config-router)# passive-interface FastEthernet0/0 R3(config-router)# output-delay 24 R3(config-router)# network 172.22.0.0 R3(config-router)# neighbor 172.22.33.44 R3(config-router)# distribute-list 100 in Serial0/1/0 R3(config-router)# distance 255 R3(config-router)# distance 120 172.22.33.44 0.0.0.0 R3(config-router)# distance 120 172.22.32.2 0.0.0.0 R3(config-router)# distance 120 172.22.63.6 0.0.0.0 R3(config-router)# no auto-summary R3(config-router)#! R3(config-router)#router bgp 300 R3(config-router)# no synchronization R3(config-router)# bgp router-id 3.3.3.3 R3(config-router)# bgp log-neighbor-changes R3(config-router)# bgp confederation identifier 4321 R3(config-router)# bgp confederation peers 124 R3(config-router)# bgp dampening route-map Multicast R3(config-router)# aggregate-address 215.7.0.0 255.255.240.0 summary-only R3(config-router)# redistribute connected R3(config-router)# neighbor 172.22.32.2 remote-as 124 R3(config-router)# neighbor 172.22.32.2 filter-list 1 out R3(config-router)# neighbor 172.22.63.6 remote-as 600 R3(config-router)# neighbor 172.22.63.6 send-community R3(config-router)# neighbor 172.22.63.6 route-map 200route in R3(config-router)# 02:21:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback1, changed state to up 02:21:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down neighbor 172.22.63.6 route-map PodLoops out R3(config-router)# neighbor 172.22.142.4 remote-as 124 R3(config-router)# neighbor 172.22.142.4 ebgp-multihop 2 R3(config-router)# neighbor 172.22.142.4 filter-list 1 out R3(config-router)# no auto-summary R3(config-router)#! R3(config-router)#ip as-path access-list 1 permit _4000(_0-9+)*_7000$ R3(config)#ip as-path access-list 1 permit _(1000|7000)_ R3(config)#ip as-path access-list 1 deny _4000_ R3(config)#ip as-path access-list 1 permit _1000$ R3(config)#ip as-path access-list 1 permit _900$ R3(config)#ip as-path access-list 1 permit ^$ R3(config)#! R3(config)#no ip http server R3(config)#no ip http secure-server R3(config)#! R3(config)#ip prefix-list 200route seq 5 permit 200.1.0.0/16 R3(config)#! R3(config)#ip prefix-list Multicast seq 5 permit 224.0.0.0/4 le 32 R3(config)#! R3(config)#ip prefix-list PodLoops seq 5 permit 172.22.83.0/24 R3(config)#ip prefix-list PodLoops seq 10 permit 172.22.82.0/24 R3(config)#ip prefix-list PodLoops seq 15 permit 172.22.84.0/24 R3(config)#access-list 100 deny ip host 172.22.63.6 0.1.1.0 255.254.254.255 R3(config)#access-list 100 permit ip any any R3(config)#ipv6 router ospf 1 R3(config-rtr)# router-id 3.3.3.3 R3(config-rtr)# log-adjacency-changes R3(config-rtr)#! R3(config-rtr)#route-map PodLoops permit 10 R3(config-route-map)# match ip address prefix-list PodLoops R3(config-route-map)# set community no-export R3(config-route-map)#! R3(config-route-map)#route-map 200route permit 10 R3(config-route-map)# set as-path prepend 550 500 450 R3(config-route-map)#! R3(config-route-map)#route-map 200route permit 20 R3(config-route-map)#! R3(config-route-map)#route-map Multicast permit 10 R3(config-route-map)# match ip address prefix-list Multicast R3(config-route-map)# set dampening 5 500 999 5 R3(config-route-map)#! R3(config-route-map)#route-map Multicast permit 20 R3(config-route-map)#! R3(config-route-map)#line con 0 R3(config-line)# exec-timeout 0 0 R3(config-line)# privilege level 15 R3(config-line)# logging synchronous R3(config-line)#line aux 0 R3(config-line)#line vty 0 4 R3(config-line)# password cisco R3(config-line)# login R3(config-line)#line vty 5 15 R3(config-line)# password cisco R3(config-line)# login R3(config-line)#! R3(config-line)#end R3#wr Building configuration... 02:21:25: %OSPFv3-5-ADJCHG: Process 1, Nbr 0.0.0.0 on Serial0/0/0 from ATTEMPT to DOWN, Neighbor Down: Interface down or detached 02:21:26: %SYS-5-CONFIG_I: Configured from console by console[OK] R3# RACK98AS>4 [Resuming connection 4 to r4 ... ] R4(config)#! R4(config)#hostname R4 R4(config)#! R4(config)#ip cef R4(config)#! R4(config)#no ip domain lookup R4(config)#! R4(config)#ipv6 unicast-routing R4(config)#! R4(config)#class-map match-all af13 R4(config-cmap)# match ip dscp af13 R4(config-cmap)#class-map match-all af22 R4(config-cmap)# match ip dscp af22 R4(config-cmap)#class-map match-all prec1 R4(config-cmap)# match ip precedence 1 R4(config-cmap)#class-map match-all prec2 R4(config-cmap)# match ip precedence 2 R4(config-cmap)#! R4(config-cmap)#policy-map test R4(config-pmap)# class af22 R4(config-pmap-c)# class af13 R4(config-pmap-c)# class prec1 R4(config-pmap-c)# class prec2 R4(config-pmap-c)#! R4(config-pmap-c)#interface Loopback0 R4(config-if)# ip address 172.22.84.1 255.255.255.0 R4(config-if)# ip ospf 1 area 0 R4(config-if)#! R4(config-if)#interface Loopback1 R4(config-if)# no ip address R4(config-if)# ipv6 address 2006:4:4::/128 R4(config-if)# ipv6 ospf 1 area 0 R4(config-if)#! R4(config-if)#interface Tunnel0 R4(config-if)# no ip address R4(config-if)# ipv6 address 2005:34:34::4/64 R4(config-if)# ipv6 ospf 1 area 0 R4(config-if)# keepalive 10 3 R4(config-if)# tunnel source Loopback0 R4(config-if)# tunnel destination 172.22.83.1 R4(config-if)# tunnel mode ipv6ip R4(config-if)# no shutdown R4(config-if)#! R4(config-if)#interface FastEthernet0/0 R4(config-if)# shutdown R4(config-if)#! R4(config-if)#interface FastEthernet0/1 R4(config-if)# ip address 172.22.174.4 255.255.255.192 R4(config-if)# speed auto R4(config-if)# duplex auto R4(config-if)# service-policy input test R4(config-if)# no shutdown R4(config-if)#! R4(config-if)#interface Serial0/0/0 R4(config-if)# ip address 172.22.142.4 255.255.255.0 R4(config-if)# encapsulation frame-relay R4(config-if)# ip ospf message-digest-key 1 md5 CISCO R4(config-if)# ip ospf network point-to-point R4(config-if)# ip ospf hello-interval 60 R4(config-if)# ip ospf 1 area 0 R4(config-if)# ipv6 address 2005:124:124::4/64 R4(config-if)# ipv6 address FE80::4 link-local R4(config-if)# ipv6 ospf network point-to-point R4(config-if)# ipv6 ospf 1 area 124 R4(config-if)# frame-relay map ipv6 FE80::2 422 broadcast R4(config-if)# frame-relay map ip 172.22.142.1 422 R4(config-if)# frame-relay map ip 172.22.142.2 422 broadcast R4(config-if)# frame-relay map ipv6 2005:124:124::1 422 R4(config-if)# frame-relay map ipv6 2005:124:124::2 422 broadcast R4(config-if)# no shutd 02:21:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback1, changed state to up 02:21:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down 02:21:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to upown R4(config-if)#! R4(config-if)#interface Serial0/0/1 R4(config-if)# shutdown R4(config-if)#! R4(config-if)#interface Serial0/1/0 R4(config-if)# shutdown R4(config-if)#! R4(config-if)#interface Serial0/1/1 R4(config-if)# shutdown R4(config-if)#! R4(config-if)#router eigrp 174 R4(config-router)# redistribute ospf 1 metric 10000 1000 255 1 1500 route-map$te ospf 1 metric 10000 1000 255 1 1500 route-map NotFromR6 R4(config-router)# passive-interface Serial0/0/0 R4(config-router)# network 172.22.0.0 R4(config-router)# distance eigrp 90 90 R4(config-router)# no auto-summary R4(config-router)#! R4(config-router)#router ospf 1 R4(config-router)# router-id 4.4.4.4 R4(config-router)# log-adjacency-changes R4(config-router)# auto-cost reference-bandwidth 1000 % OSPF: Reference bandwidth is changed. Please ensure reference bandwidth is consistent across all routers. R4(config-router)# area 0 authentication message-digest R4(config-router)# timers throttle spf 6000 6000 6000 R4(config-router)# redistribute eigrp 174 metric-type 1 subnets tag 4 R4(config-router)# distance ospf intra-area 88 inter-area 89 R4(config-router)#! R4(config-router)#router bgp 124 R4(config-router)# no synchronization R4(config-router)# bgp router-id 4.4.4.4 R4(config-router)# bgp log-neighbor-changes R4(config-router)# bgp confederation identifier 4321 R4(config-router)# bgp confederation peers 300 R4(config-router)# neighbor 172.22.32.3 remote-as 300 R4(config-router)# neighbor 172.22.32.3 ebgp-multihop 2 R4(config-router)# neighbor 172.22.142.2 remote-as 124 R4(config-router)# no auto-summary R4(config-router)#! R4(config-router)#ipv6 router ospf 1 R4(config-rtr)# router- 02:21:39: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 174: Neighbor 172.22.174.7 (FastEthernet0/1) is up: new adjacency 02:21:39: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 174: Neighbor 172.22.174.1 (FastEthernet0/1) is up: new adjacency 02:21:39: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 174: Neighbor 172.22.174.1 (FastEthernet0/1) is resync: summary configured 02:21:39: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 174: Neighbor 172.22.174.7 (FastEthernet0/1) is resync: summary configuredid 4.4.4.4 R4(config-rtr)# log-adjacency-changes R4(config-rtr)#! R4(config-rtr)#! R4(config-rtr)#route-map NotFromR6 deny 10 R4(config-route-map)# match tag 6 R4(config-route-map)#! R4(config-route-map)#route-map NotFromR6 permit 20 R4(config-route-map)#line con 0 R4(config-line)# exec-timeout 0 0 R4(config-line)# privilege level 15 R4(config-line)# logging synchronous R4(config-line)#line aux 0 R4(config-line)#line vty 0 4 R4(config-line)# password cisco R4(config-line)# login R4(config-line)#! R4(config-line)#end R4#wr Building configuration... 02:21:41: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 174: Neighbor 172.22.174.8 (FastEthernet0/1) is up: new adjacency 02:21:42: %SYS-5-CONFIG_I: Configured from console by console[OK] R4# 02:21:48: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to up R4# RACK98AS>5 [Resuming connection 5 to r5 ... ] R5(config)#! R5(config)#hostname R5 R5(config)#! R5(config)#ip cef R5(config)#! R5(config)#no ip domain lookup R5(config)#! R5(config)#username R1 password 0 BluesBrothers R5(config)#! R5(config)#interface Loopback0 R5(config-if)# ip address 172.22.85.1 255.255.255.0 R5(config-if)# ip ospf 1 area 1 R5(config-if)#! R5(config-if)#interface Loopback1 R5(config-if)# ip address 144.251.100.201 255.255.255.252 R5(config-if)# ip ospf 1 area 2 R5(config-if)#! R5(config-if)#interface FastEthernet0/0 R5(config-if)# shutdown R5(config-if)#! R5(config-if)#interface FastEthernet0/1 R5(config-if)# no ip address R5(config-if)# no shutdown R5(config-if)#! R5(config-if)#interface FastEthernet0/1.52 R5(config-subif)# encapsulation isl 52 R5(config-subif)# ip address 172.22.52.5 255.255.255.224 R5(config-subif)# no ip redirects R5(config-subif)# ip ospf 1 area 1 R5(config-subif)# no snmp trap link-status R5(config-subif)# no shutdown R5(config-subif)#! R5(config-subif)#interface FastEthernet1/0 R5(config-if)# shutdown R5(config-if)#! R5(config-if)#interface Serial1/0 R5(config-if)# no ip address R5(config-if)# encapsulation frame-relay R5(config-if)# frame-relay interface-dlci 521 ppp Virtual-Template1 R5(config-fr-dlci)# no frame-relay inverse-arp R5(config-if)# no shutdown R5(config-if)#! R5(config-if)#interface FastEthernet1/1 R5(config-if)# shutdown R5(config-if)#! R5(config-if)#interface Serial1/1 R5(config-if)# shutdown R5(config-if)#! R5(config-if)#interface Serial1/2 R5(config-if)# shutdown R5(config-if)#! R5(config-if)#interface Serial1/3 R5(config-if)# shutdown R5(config-if)#! R5(config-if)#interface Virtual-Template1 R5(config-if)# bandwidth 64 R5(config-if)# ip address 172.22.51.2 255.255.255.252 R5(config-if)# ip bandwidth-percent eigrp 174 100 R5(config-if)# ip hello-interval eigrp 174 10 R5(config-if)# 02:21:03: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up ip hold-time eigrp 174 30 R5(config-if)# ppp authentication chap R5(config-if)# no shutdown R5(config-if)#! R5(config-if)#router eigrp 174 R5(config-router)# redistribute ospf 1 metric 10000 1000 255 1 1500 R5(config-router)# passive-interface FastEthernet0/1 R5(config-router)# network 172.22.0.0 R5(config-router)# no auto-summary R5(config-router)#! R5(config-router)#router ospf 1 R5(config-router)# router-id 5.5.5.5 Reload or use "clear ip ospf process" command, for this to take effect R5(config-router)# log-adjacency-changes R5(config-router)# auto-cost reference-bandwidth 1000 % OSPF: Reference band 02:21:03: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback1, changed state to upwidth is changed. Please ensure reference bandwidth is consistent across all routers. R5(config-router)# area 0 authentication message-digest R5(config-router)# area 1 virtual-link 2.2.2.2 message-digest-key 1 md5 CISCO R5(config-router)# redistribute eigrp 174 metric-type 1 subnets tag 5 R5(config-router)#! R5(config-router)#exit R5(config)#! R5(config)#line con 0 R5(config-line)# exec-timeout 0 0 R5(config-line)# privilege level 15 R5(config-line)# logging synchronous R5(config-line)#line aux 0 R5(config-line)#line vty 0 4 R5(config-line)# password cisco R5(config-line)# login R5(config-line)#line vty 5 15 R5(config-line)# password cisco R5(config-line)# login R5(config-line)#! R5(config-line)#! R5(config-line)#end R5#wr Building configuration... 02:21:05: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up 02:21:05: %SYS-5-CONFIG_I: Configured from console by console 02:21:06: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to up[OK] R5# 02:21:09: %OSPF-5-ADJCHG: Process 1, Nbr 9.9.9.9 on FastEthernet0/1.52 from LOADING to FULL, Loading Done 02:21:09: %OSPF-5-ADJCHG: Process 1, Nbr 2.2.2.2 on FastEthernet0/1.52 from LOADING to FULL, Loading Done R5# 02:21:11: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 174: Neighbor 172.22.51.1 (Virtual-Access1) is up: new adjacency R5# RACK98AS>6 [Resuming connection 6 to r6 ... ] 02:21:47: %BGP-5-ADJCHANGE: neighbor 172.22.63.3 Up R6(config)# R6(config)#! R6(config)#hostname R6 R6(config)#ip cef R6(config)#no ip domain lookup R6(config)#ip host SW2 172.22.52.9 R6(config)#ip host SW1 172.22.174.8 R6(config)#ip host R7 172.22.87.1 R6(config)#ip host R6 172.22.86.1 R6(config)#ip host R5 172.22.85.1 R6(config)#ip host R4 172.22.84.1 R6(config)#ip host R3 172.22.83.1 R6(config)#ip host R2 172.22.82.1 R6(config)#ip host R1 172.22.81.1 R6(config)#! R6(config)#ipv6 unicast-routing R6(config)#interface Loopback0 R6(config-if)# ip address 172.22.86.1 255.255.255.0 R6(config-if)# ip rip advertise 60 R6(config-if)#! R6(config-if)#interface Loopback1 R6(config-if)# ip address 172.217.59.6 255.255.255.0 secondary R6(config-if)# ip address 150.153.59.6 255.255.255.0 secondary R6(config-if)# ip address 172.153.43.6 255.255.255.0 secondary R6(config-if)# ip address 150.217.43.6 255.255.255.0 secondary R6(config-if)# ip address 150.153.43.6 255.255.255.0 secondary R6(config-if)# ip address 150.217.59.6 255.255.255.0 secondary R6(config-if)# ip address 172.153.59.6 255.255.255.0 secondary R6(config-if)# ip address 200.200.200.1 255.255.255.0 secondary R6(config-if)# ip address 201.201.201.1 255.255.255.0 secondary R6(config-if)# ip address 202.202.202.1 255.255.255.0 secondary R6(config-if)# ip address 172.217.43.6 255.255.255.0 R6(config-if)# ip rip advertise 60 R6(config-if)# ipv6 address 2006:6:6::/128 R6(config-if)# ipv6 rip R6 enable R6(config-if)#! R6(config-if)#interface Tunnel0 R6(config-if)# no ip address R6(config-if)# ipv6 address 2005:26:26::6/64 R6(config-if)# ipv6 rip R6 enable R6(config-if)# keepalive 10 3 R6(config-if)# tunnel source Serial0/0/2 R6(config-if)# tunnel destination 172.22.62.2 R6(config-if)# tunnel mode ipv6ip R6(config-if)# no shutdown R6(config-if)#! R6(config-if)#interface GigabitEthernet0/0 R6(config-if)# shutdown R6(config-if)#! R6(config-if)#interface GigabitEthernet0/1 R6(config-if)# shutdown R6(config-if)#! R6(config-if)#interface Serial0/0/0 R6(config-if)# shutdown R6(config-if)#! R6(config-if)#interface Serial0/0/1 R6(config-if)# shutdown R6(config-if)#! R6(config-if)#interface Serial0/0/2 R6(config-if)# ip address 172.22.62.6 255.255.255.0 R6(config-if)# ip rip advertise 60 R6(config-if)# no fair-queue R6(config-if)# no shutdown R6(config-if)#! R6(config-if)#interface Serial0/0/3 R6(config-if)# ip address 172.22.63.6 255.255.255.0 R6(config-if)# ip rip advertise 60 R6(config-if)# no shutdown R6(config-if)#! R6(config-if)#interface FastEthernet1/0 R6(config-if)# shutdown R6(config-if)#! R6(config-if)#interface FastEthernet1/1 R6(config-if)# shutdown R6(config-if)#! R6(config-if)#router rip R6(config-router)# version 2 R6(config-router)# timers basic 60 240 240 300 R6(config-router)# network 150.153.0.0 R6(config-router)# network 150.217.0.0 R6(config-router)# network 172.16.0.0 R6(config-router)# network 172.21.0.0 R6(config-router)# network 172.22.0.0 R6(config-router)# network 172.23.0.0 R6(config-router)# network 172.153.0.0 R6(config-router)# network 172.217.0.0 R6(config-router)# network 200.200.200.0 R6(config-router)# network 201.201.201.0 R6(config-router)# network 202.202.202.0 R6(config-router)# no auto-summary R6(config-router)#! R6(config-router)#router bgp 600 R6(config-router)# no synchronization R6(config-router)# bgp log-neighbor-changes R6(config-router)# redistribute static route-map filter-statics R6(config-router)# neighbor 172.22.63.3 remote-as 4321 R6(config-router)# neighbor 172.22.63.3 route-map adjust-as out R6(config-router)# no auto-summary R6(config-router)#! R6(config-router)#ip route 200.1.0.0 255.255.0.0 Null0 R6(config)#ip route 206.206.206.0 255.255.255.0 Null0 R6(config)#ip route 206.206.207.0 255.255.255.0 Null0 R6(config)#ip route 207.1.0.0 255.255.255.0 Null0 R6(config)#ip route 207.1.4.0 255.255.255.0 Null0 R6(config)#ip route 207.4.0.0 255.255.255.0 Null0 R6(config)#ip route 208.1.0.0 255.255.255.0 Null0 R6(config)#ip route 208.1.4.0 255.255.255.0 Null0 R6(c 02:22:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to uponfig)#ip route 208.7.1.0 255.255.255.0 Null0 R6(config)#ip route 208.7.4.0 255.255.255.0 Null0 R6(config)#ip route 215.7.1.0 255.255.255.0 Null0 R6(config)#ip route 215.7.10.0 255.255.255.0 Null0 R6(config)#ip route 215.7.20.0 255.255.255.0 Null0 R6(config)#ip route 215.7.30.0 255.255.255.0 Null0 R6(config)#! R6(config)#access-list 1 permit 208.1.0.0 R6(config)#access-list 2 permit 208.1.4.0 R6(config)#access-list 3 permit 207.4.0.0 R6(config)#access-list 4 permit 207.1.0.0 R6(config)#access-list 5 permit 208.7.4.0 R6(config)#access-list 6 permit 208.7.1.0 R6(config)#access-list 7 permit 207.1.4.0 R6(config)#access-list 8 permit 206.206.206.0 R6(config)#access-list 9 permit 206.206.207.0 R6(config)#access-list 10 permit 208.0.0.0 0.255.255.255 R6(config)#access-list 10 permit 207.0.0.0 0.255.255.255 R6(config)#access-list 10 permit 215.0.0.0 0.255.255.255 R6(config)#access-list 10 permit 200.0.0.0 0.255.255.255 R6(config)#access-list 10 permit 206.0.0.0 0.255.255.255 R6(config)#ipv6 router rip R6 R6(config-rtr)#! R6(config-rtr)#route-map adjust-as permit 10 R6(config-route-map)# match ip address 1 R6(config-route-map)# set as-path prepend 1000 8000 R6(config-route-map)#! R6(config-route-map)#route-map adjust-as permit 15 R6(config-route-map)# match ip address 8 R6(config-route-map)# set as-path prepend 5000 6000 7000 8000 R6(config-route-map)#! R6(config-route-map)#route-map adjust-as permit 18 R6(config-route-map)# match ip address 9 R6(config-route-map)# set as-path prepend 500 1000 1500 R6(config-route-map)#! R6(config-route-map)#route-map adjust-as permit 20 R6(config-route-map)# match ip address 2 R6(config-route-map)# set as-path prepend 4000 1000 8000 R6(config-route-map)#! R6(config-route-map)#route-map adjust-as permit 30 R6(config-route-map)# match ip address 3 R6(config-route-map)# set as-path prepend 4000 7000 R6(config-route-map)#! R6(config-route-map)#route-map adjust-as permit 35 R6(config-route-map)# match ip address 7 R6(config-route-map)# set as-path prepend 4000 1 7000 R6(config-route-map)#! R6(config-route-map)#route-map adjust-as permit 40 R6(config-route-map)# match ip address 4 R6(config-route-map)# set as-path prepend 1000 7000 R6(config-route-map)#! R6(config-route-map)#route-map adjust-as permit 50 R6(config-route-map)# match ip address 5 R6(config-route-map)# set as-path prepend 4000 7000 8000 R6(config-route-map)#! R6(config-route-map)#route-map adjust-as permit 60 R6(config-route-map)# match ip address 6 R6(config-route-map)# set as-path prepend 1000 7000 8000 R6(config-route-map)#! R6(config-route-map)#route-map adjust-as permit 70 R6(config-route-map)# set as-path prepend 900 R6(config-route-map)#! R6(config-route-map)#route-map filter-statics permit 10 R6(config-route-map)# match ip address 10 R6(config-route-map)#! R6(config-route-map)#line con 0 R6(config-line)# exec-timeout 0 0 R6(config-line)# privilege level 15 R6(config-line)# logging synchronous R6(config-line)# stopbits 1 R6(config-line)#line aux 0 R6(config-line)# stopbits 1 R6(config-line)#line vty 0 4 R6(config-line)# password cisco R6(config-line)# login R6(config-line)#! R6(config-line)#end R6#wr Building configuration... [OK] R6# 02:22:14: %SYS-5-CONFIG_I: Configured from console by console R6# RACK98AS>7 [Resuming connection 7 to r7 ... ] [OK] R7-FS# *Ma R7-FS#sh ip RACK98AS>1 [Resuming connection 1 to r1 ... ] [OK] R1# R1#sh ip in tbrie ^ % Invalid input detected at '^' marker. R1#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 172.22.174.1 YES manual up up Serial0/0 unassigned YES manual up up Serial0/0.1 172.22.142.1 YES manual up up Serial0/0.2 172.22.51.1 YES manual up up FastEthernet0/1 unassigned YES unset administratively down down Serial0/1 unassigned YES unset administratively down down NVI0 unassigned NO unset up up Virtual-Access1 172.22.51.1 YES TFTP up up Virtual-Template1 172.22.51.1 YES manual down down Virtual-Access2 unassigned YES unset down down Loopback0 172.22.81.1 YES manual up up --More-- R1#sh run | i int |ip add interface Loopback0 ip address 172.22.81.1 255.255.255.0 interface Loopback1 no ip address interface Loopback2 description To inject into OSPFv3 for the prefix to R5 ip address 199.199.199.1 255.255.255.0 interface Loopback100 ip address 131.108.1.1 255.255.255.0 interface FastEthernet0/0 ip address 172.22.174.1 255.255.255.192 interface Serial0/0 no ip address interface Serial0/0.1 multipoint ip address 172.22.142.1 255.255.255.0 ip ospf network point-to-multipoint ip ospf hello-interval 60 ipv6 ospf network point-to-point frame-relay interface-dlci 122 interface Serial0/0.2 point-to-point ip address 172.22.51.1 255.255.255.252 frame-relay interface-dlci 125 ppp Virtual-Template1 interface FastEthernet0/1 --More-- R1#sh run Building configuration... Current configuration : 4176 bytes ! version 12.4 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname R1 ! boot-start-marker boot-end-marker ! ! no aaa new-model memory-size iomem 10 no network-clock-participate slot 1 no network-clock-participate wic 0 ip cef ! ! ! ! --More-- no ip domain lookup ! ipv6 unicast-routing ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! username R5 password 0 BluesBrothers ! ! ! --More-- ! ! ! ! interface Loopback0 ip address 172.22.81.1 255.255.255.0 ! interface Loopback1 no ip address ipv6 address 2006:1:1::/128 ipv6 ospf 1 area 0 ! interface Loopback2 description To inject into OSPFv3 for the prefix to R5 ip address 199.199.199.1 255.255.255.0 ! interface Loopback100 description for BGP announce ip address 131.108.1.1 255.255.255.0 ! interface FastEthernet0/0 ip address 172.22.174.1 255.255.255.192 ip policy route-map Telnet-PBR --More-- duplex auto speed auto ! interface Serial0/0 no ip address encapsulation frame-relay ! interface Serial0/0.1 multipoint bandwidth 128 ip address 172.22.142.1 255.255.255.0 ip ospf message-digest-key 1 md5 CISCO ip ospf network point-to-multipoint ip ospf hello-interval 60 ipv6 address 2005:124:124::1/64 ipv6 address FE80::1 link-local ipv6 nat ipv6 ospf network point-to-point ipv6 ospf 1 area 124 frame-relay map ipv6 FE80::2 122 broadcast frame-relay map ip 172.22.142.1 122 frame-relay map ip 172.22.142.2 122 broadcast frame-relay map ip 172.22.142.4 122 frame-relay map ipv6 2005:124:124::2 122 broadcast --More-- frame-relay map ipv6 2005:124:124::4 122 frame-relay interface-dlci 122 ! interface Serial0/0.2 point-to-point ip address 172.22.51.1 255.255.255.252 frame-relay interface-dlci 125 ppp Virtual-Template1 ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/1 no ip address shutdown ! interface Virtual-Template1 bandwidth 64 ip address 172.22.51.1 255.255.255.252 ip bandwidth-percent eigrp 174 100 ip hello-interval eigrp 174 10 ip hold-time eigrp 174 30 --More-- ipv6 nat ppp authentication chap ! router eigrp 174 redistribute ospf 1 metric 32 2000 255 1 1500 route-map NoEigrp passive-interface Serial0/0 passive-interface Loopback0 network 172.22.0.0 network 199.199.199.1 0.0.0.0 distance eigrp 90 90 no auto-summary eigrp router-id 172.22.81.1 ! router ospf 1 router-id 1.1.1.1 log-adjacency-changes auto-cost reference-bandwidth 1000 area 0 authentication message-digest timers throttle spf 5000 60000 60000 redistribute eigrp 174 metric 10000 metric-type 1 subnets network 172.22.142.1 0.0.0.0 area 0 distance ospf external 89 ! --More-- router bgp 124 no synchronization bgp router-id 1.1.1.1 bgp log-neighbor-changes bgp confederation identifier 4321 bgp confederation peers 300 timers bgp 300 900 redistribute connected route-map intoBGP neighbor 172.22.82.1 remote-as 124 neighbor 172.22.82.1 update-source Loopback0 neighbor 172.22.82.1 advertisement-interval 300 no auto-summary ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ip access-list standard R6Loop0 permit 172.22.86.0 ! ip access-list extended Telnet-PBR --More-- permit tcp host 172.22.87.1 host 172.22.82.1 eq telnet permit tcp host 172.22.87.1 eq telnet host 172.22.82.1 ! ipv6 router ospf 1 router-id 1.1.1.1 log-adjacency-changes area 124 virtual-link 4.4.4.4 distribute-list prefix-list NATPT out connected redistribute connected ! ipv6 nat v4v6 source 172.22.52.5 2006:5:5::5 ipv6 nat v6v4 source list NATPT pool MyPool ipv6 nat v6v4 pool MyPool 199.199.199.2 199.199.199.100 prefix-length 24 ipv6 nat prefix 2006:5:5::/96 ! ! ipv6 prefix-list NATPT seq 5 permit 2006:5:5::/96 route-map intoBGP permit 10 match interface Loopback100 ! route-map Telnet-PBR permit 10 match ip address Telnet-PBR set ip next-hop 172.22.51.2 --More-- ! route-map NoEigrp permit 10 match ip address R6Loop0 ! route-map NoEigrp deny 20 match tag 6 ! route-map NoEigrp permit 30 ! ! ! ipv6 access-list NATPT permit ipv6 any any ! control-plane ! ! ! ! ! ! ! ! --More-- ! ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous line aux 0 line vty 0 4 password cisco login line vty 5 15 password cisco login ! ! end R1# RACK98AS>2 [Resuming connection 2 to r2 ... ] 02:16:47: %SYS-5-CONF R2# R2#conf t Enter configuration commands, one per line. End with CNTL/Z. R2(config)# 02:55:21: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from backbone area must be virtual-link but not found from 172.22.52.5, FastEthernet0/0 R2(config)#map R2(config)#map-cl R2(config)#map-class ? atm Asynchronous transfer mode dialer Dial on Demand frame-relay Frame Relay R2(config)#map-class 02:55:31: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from backbone area must be virtual-link but not found from 172.22.52.5, FastEthernet0/0 R2(config)#map-class fr R2(config)#map-class frame-relay ? WORD Static map class name R2(config)#map-class frame-relay 02:55:41: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from backbone area must be virtual-link but not found from 172.22.52.5, FastEthernet0/0 R2(config)#map-class frame-relay 02:55:51: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from backbone area must be virtual-link but not found from 172.22.52.5, FastEthernet0/0 R2(config)# RACK98AS>5 [Resuming connection 5 to r5 ... ] R5#sh run | b s ospf ip ospf 1 area 1 ip ospf 1 area 2 ip ospf 1 area 1 redistribute ospf 1 metric 10000 1000 255 1 1500 router ospf 1 router-id 5.5.5.5 log-adjacency-changes auto-cost reference-bandwidth 1000 area 0 authentication message-digest area 1 virtual-link 2.2.2.2 message-digest-key 1 md5 CISCO redistribute eigrp 174 metric-type 1 subnets tag 5 R5# RACK98AS>2 [Resuming connection 2 to r2 ... ] 02:56:01: %OSPF-4 R2(config)# 02:56:11: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from backbone area must be virtual-link but not found from 172.22.52.5, FastEthernet0/0 R2(config)#do sh run | s ospf ip ospf 1 area 0 ip ospf 1 area 1 ipv6 ospf network non-broadcast ipv6 ospf 1 area 23 ip ospf message-digest-key 1 md5 CISCO ip ospf network point-to-multipoint ip ospf hello-interval 60 ip ospf 1 area 0 ipv6 ospf network point-to-multipoint ipv6 ospf hello-interval 10 ipv6 ospf 1 area 124 router ospf 1 router-id 2.2.2.2 log-adjacency-changes auto-cost reference-bandwidth 1000 area 0 authentication message-digest area 0 range 172.22.84.0 255.255.254.0 area 1 virtual-link 5.5.5.5 message-digest-key 1 md5 CISCO timers throttle spf 6000 6000 6000 redistribute rip metric-type 1 subnets tag 2 route-map FromR6 distance ospf external 121 redistribute ospf 1 metric 2 ipv6 router ospf 1 --More-- 02:56:21: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from backbone area must be virtual-link but not found from 172.22.52.5, FastEthernet0/0 --More-- R2(config)# RACK98AS>5 [Resuming connection 5 to r5 ... ] R5#sh ip ospf Routing Process "ospf 1" with ID 172.22.85.1 Start time: 02:21:02.920, Time elapsed: 00:38:55.744 Supports only single TOS(TOS0) routes Supports opaque LSA Supports Link-local Signaling (LLS) Supports area transit capability It is an area border and autonomous system boundary router Redistributing External Routes from, eigrp 174, includes subnets in redistribution Router is not originating router-LSAs with maximum metric Initial SPF schedule delay 5000 msecs Minimum hold time between two consecutive SPFs 10000 msecs Maximum wait time between two consecutive SPFs 10000 msecs Incremental-SPF disabled Minimum LSA interval 5 secs Minimum LSA arrival 1000 msecs LSA group pacing timer 240 secs Interface flood pacing timer 33 msecs Retransmission pacing timer 66 msecs Number of external LSA 40. Checksum Sum 0x12C4CE Number of opaque AS LSA 0. Checksum Sum 0x000000 Number of DCbitless external and opaque AS LSA 0 Number of DoNotAge external and opaque AS LSA 0 --More-- R5#clea clea ip opsp spf pro Reset ALL OSPF processes? [no]: y R5# 03:00:09: %OSPF-5-ADJCHG: Process 1, Nbr 2.2.2.2 on FastEthernet0/1.52 from FULL to DOWN, Neighbor Down: Interface down or detached 03:00:09: %OSPF-5-ADJCHG: Process 1, Nbr 9.9.9.9 on FastEthernet0/1.52 from FULL to DOWN, Neighbor Down: Interface down or detached 03:00:09: %OSPF-3-RECONF_VL: OSPF process 1 is changing router-id. Reconfigure virtual link neighbors with our new router-id R5# 03:00:09: %OSPF-5-ADJCHG: Process 1, Nbr 2.2.2.2 on FastEthernet0/1.52 from LOADING to FULL, Loading Done R5# 03:00:13: %OSPF-5-ADJCHG: Process 1, Nbr 9.9.9.9 on FastEthernet0/1.52 from LOADING to FULL, Loading Done R5#sh ip ospf Routing Process "ospf 1" with ID 5.5.5.5 Start time: 02:21:02.920, Time elapsed: 00:39:12.840 Supports only single TOS(TOS0) routes Supports opaque LSA Supports Link-local Signaling (LLS) Supports area transit capability It is an autonomous system boundary router Redistributing External Routes from, eigrp 174, includes subnets in redistribution Router is not originating router-LSAs with maximum metric Initial SPF schedule delay 5000 msecs Minimum hold time between two consecutive SPFs 10000 msecs Maximum wait time between two consecutive SPFs 10000 msecs Incremental-SPF disabled Minimum LSA interval 5 secs Minimum LSA arrival 1000 msecs LSA group pacing timer 240 secs Interface flood pacing timer 33 msecs Retransmission pacing timer 66 msecs Number of external LSA 51. Checksum Sum 0x27C4D2 Number of opaque AS LSA 0. Checksum Sum 0x000000 Number of DCbitless external and opaque AS LSA 0 Number of DoNotAge external and opaque AS LSA 0 --More-- R5# RACK98AS>2 [Resuming connection 2 to r2 ... ] 02:56:31: %OSPF- R2(config)# R2(config)# R2(config)# 02:57:00: %OSPF-5-ADJCHG: Process 1, Nbr 5.5.5.5 on OSPF_VL0 from LOADING to FULL, Loading Done R2(config)# R2(config)# R2(config)# R2(config)# R2(config)#map-= clas R2(config)#map-class fra R2(config)#map-class frame-relay ? WORD Static map class name R2(config)#map-class frame-relay ToR3 R2(config-map-class)# 02:57:22: %OSPF-5-ADJCHG: Process 1, Nbr 172.22.85.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Dead timer expired R2(config-map-class)#? Static maps class configuration commands: default Set a command to its defaults exit-class Exit from static map class configuration mode frame-relay Configure Map parameters help Description of the interactive help system no Negate a command or set its defaults service-policy class-based service policy R2(config-map-class)# R2(config-map-class)# R2(config-map-class)# R2(config-map-class)# R2(config-map-class)# R2(config-map-class)#fram R2(config-map-class)#frame-relay ? adaptive-shaping Adaptive traffic rate adjustment, Default = none bc Committed burst size (Bc), Default = 7000 bits be Excess burst size (Be), Default = 0 bits cir Committed Information Rate (CIR), Default = 56000 bps congestion Congestion management parameters custom-queue-list VC custom queueing end-to-end Configure frame-relay end-to-end VC parameters fair-queue VC fair queueing fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fragment fragmentation - Requires Frame Relay traffic-shaping to be configured at the interface level holdq Hold queue size for VC idle-timer Idle timeout for a SVC, Default = 120 sec interface-queue PVC interface queue parameters ip Assign a priority queue for RTP streams mincir Minimum acceptable CIR, Default = CIR/2 bps priority-group VC priority queueing tc Policing Measurement Interval (Tc) traffic-rate VC traffic rate voice voice options R2(config-map-class)#frame-relay cir R2(config-map-class)#frame-relay cir 125 ? <1-45000000> Applied to both Incoming/Outgoing CIR, Bits per second in Incoming CIR out Outgoing CIR R2(config-map-class)#frame-relay cir 128000 R2(config-map-class)#fram R2(config-map-class)#frame-relay bc R2(config-map-class)#frame-relay bc 32000 R2(config-map-class)#fra R2(config-map-class)#frame-relay a R2(config-map-class)#frame-relay adaptive-shaping ? becn Enable rate adjustment in response to BECN foresight Enable rate adjustment in response to ForeSight messages and BECN interface-congestion Enable rate adjustment depend on interface queue R2(config-map-class)#frame-relay adaptive-shaping be R2(config-map-class)#frame-relay adaptive-shaping becn R2(config-map-class)#fram R2(config-map-class)#frame-relay 96 R2(config-map-class)#frame-relay 96 me R2(config-map-class)#frame-relay me i R2(config-map-class)#frame-relay mincir 96000 R2(config-map-class)#int s 0/0.1 R2(config-subif)#fram R2(config-subif)#frame-relay cl R2(config-subif)#frame-relay class ToR3 R2(config-subif)#do sh traff R2(config-subif)# R2(config-subif)# R2(config-subif)# R2(config-subif)#int s 0/0 R2(config-if)#traf fram R2(config-if)#frame-relay traff R2(config-if)#frame-relay traffic-shaping R2(config-if)#frame-relay traffic-shaping int s 0/0 do sh traff Interface Se0/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 225 56000 875 7000 0 125 875 - 226 56000 875 7000 0 125 875 - Interface Se0/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 223 128000 2000 32000 0 125 2000 BECN Interface Se0/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 224 56000 875 7000 0 125 875 - 221 56000 875 7000 0 125 875 - R2(config-if)# R2(config-if)# R2(config-if)# R2(config-if)#exit R2(config)#mlc R2(config)#mlc ap R2(config)#map-cl R2(config)#map-class ToR4 ^ % Invalid input detected at '^' marker. R2(config)#map-class ToR4fToR4rToR4aToR4 ToR4 R2(config-map-class)#fram R2(config-map-class)#frame-relay cir R2(config-map-class)#frame-relay cir 256000 R2(config-map-class)#exit R2(config)#exitframe-relay cir 256000map-class fra ToR4 1 R2(config-map-class)#fram R2(config-map-class)#frame-relay ci R2(config-map-class)#frame-relay cir 312000 R2(config-map-class)#frame-relay cir 312000 be 320000 R2(config-map-class)#int s0/0.2 R2(config-subif)#do sh run int s0/0.2 Building configuration... Current configuration : 664 bytes ! interface Serial0/0.2 multipoint ip address 172.22.142.2 255.255.255.0 ip rip advertise 60 ip ospf message-digest-key 1 md5 CISCO ip ospf network point-to-multipoint ip ospf hello-interval 60 ip ospf 1 area 0 ipv6 address 2005:124:124::2/64 ipv6 address FE80::2 link-local ipv6 ospf network point-to-multipoint ipv6 ospf hello-interval 10 ipv6 ospf 1 area 124 frame-relay map ipv6 FE80::4 224 broadcast frame-relay map ip 172.22.142.1 221 broadcast frame-relay map ip 172.22.142.4 224 broadcast frame-relay map ipv6 2005:124:124::1 221 broadcast frame-relay map ipv6 2005:124:124::4 224 broadcast frame-relay map ipv6 FE80::1 221 broadcast end R2(config-subif)#fram R2(config-subif)#frame-relay inter R2(config-subif)#frame-relay interface-dlci 221 R2(config-fr-dlci)#? Frame Relay dlci configuration commands: auto Configure Automation class Assign a mapclass to a dlci default Set a command to its defaults exit Exit from FR dlci configuration mode help Description of the interactive help system load-interval Specify interval for load calculation for a dlci no Negate a command or set its defaults vofr Voice over Frame-Relay R2(config-fr-dlci)#class ToR1 R2(config-fr-dlci)#exit R2(config-subif)#exitclass ToR1frame-relay interface-dlci 221 4 R2(config-fr-dlci)#frame-relay interface-dlci 224exit class ToR1 4 R2(config-fr-dlci)#do sh run int s0/0.2 Building configuration... Current configuration : 754 bytes ! interface Serial0/0.2 multipoint ip address 172.22.142.2 255.255.255.0 ip rip advertise 60 ip ospf message-digest-key 1 md5 CISCO ip ospf network point-to-multipoint ip ospf hello-interval 60 ip ospf 1 area 0 ipv6 address 2005:124:124::2/64 ipv6 address FE80::2 link-local ipv6 ospf network point-to-multipoint ipv6 ospf hello-interval 10 ipv6 ospf 1 area 124 frame-relay map ipv6 FE80::4 224 broadcast frame-relay map ip 172.22.142.1 221 broadcast frame-relay map ip 172.22.142.4 224 broadcast frame-relay map ipv6 2005:124:124::1 221 broadcast frame-relay map ipv6 2005:124:124::4 224 broadcast frame-relay map ipv6 FE80::1 221 broadcast frame-relay interface-dlci 221 class ToR1 --More-- frame-relay interface-dlci 224 class ToR4 end R2(config-fr-dlci)#do sh traff Interface Se0/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 225 56000 875 7000 0 125 875 - 226 56000 875 7000 0 125 875 - Interface Se0/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 223 128000 2000 32000 0 125 2000 BECN Interface Se0/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 224 256000 4000 256000 0 125 4000 - 221 312000 8875 312000 32000 125 4875 - R2(config-fr-dlci)# R2(config-fr-dlci)# R2(config-fr-dlci)# R2(config-fr-dlci)# R2(config-fr-dlci)# R2(config-fr-dlci)# RACK98AS>3 [Resuming connection 3 to r3 ... ] 02:21:30: %BGP-5-AD R3#conf t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s0 do sh ru int n int s0/0/0 Building configuration... Current configuration : 396 bytes ! interface Serial0/0/0 ip address 172.22.32.3 255.255.255.0 ip rip advertise 60 encapsulation frame-relay ipv6 address 2005:23:23::3/64 ipv6 address FE80::3 link-local ipv6 ospf neighbor FE80::2 ipv6 ospf 1 area 23 frame-relay map ipv6 FE80::2 322 broadcast frame-relay map ip 172.22.32.2 322 broadcast frame-relay map ipv6 2005:23:23::2 322 broadcast no frame-relay inverse-arp end R3(config)#int s0/0/09 R3(config-if)#traf R3(config-if)#traffic-shape ? adaptive Enable Traffic Shaping adaptation to BECN fecn-adapt Enable Traffic Shaping reflection of FECN as BECN group configure token bucket: group CIR (bps) [Bc (bits) [Be (bits)]] rate configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]] R3(config-if)#traffic-shape rate ? <8000-100000000> Target Bit Rate (bits per second) R3(config-if)#traffic-shape rate 128000 ? <0-100000000> bits per interval, sustained R3(config-if)#traffic-shape rate 128000 32000 ? <0-100000000> bits per interval, excess in first interval R3(config-if)#traffic-shape rate 128000 32000 R3(config-if)#traff R3(config-if)#traffic-shape ad R3(config-if)#traffic-shape adaptive ? <1-100000000> Lower Bound Target Bit Rate (bits per second) R3(config-if)#traffic-shape adaptive ? adaptive Enable Traffic Shaping adaptation to BECN fecn-adapt Enable Traffic Shaping reflection of FECN as BECN group configure token bucket: group CIR (bps) [Bc (bits) [Be (bits)]] rate configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]] R3(config-if)#traffic-shape BECN ad R3(config-if)#traffic-shape adaptive ? <1-100000000> Lower Bound Target Bit Rate (bits per second) R3(config-if)#traffic-shape adaptive 96000 R3(config-if)#di o sh traff Interface Se0/0/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active - 128000 8000 32000 32000 250 4000 BECN R3(config-if)# R3(config-if)# R3(config-if)# R3(config-if)# R3(config-if)# RACK98AS>4 [Resuming connection 4 to r4 ... ] 02:21:49: % R4#i conf t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int s s0/0/0 R4(config-if)#tre aff R4(config-if)#traffic-shape rate 256000 R4(config-if)#x RACK98AS>1 [Resuming connection 1 to r1 ... ] R1#conf t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int s 0/0./ 1 R1(config-subif)#traf R1(config-subif)#traffic-shape ? adaptive Enable Traffic Shaping adaptation to BECN fecn-adapt Enable Traffic Shaping reflection of FECN as BECN group configure token bucket: group CIR (bps) [Bc (bits) [Be (bits)]] rate configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]] R1(config-subif)#traffic-shape rate 312000 ? <0-100000000> bits per interval, sustained R1(config-subif)#traffic-shape rate 312000 39000 ? <0-100000000> bits per interval, excess in first interval R1(config-subif)#traffic-shape rate 312000 39000 32000 R1(config-subif)#do sh traff Interface Se0/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active - 312000 8875 39000 32000 125 4875 - R1(config-subif)# R1(config-subif)# R1(config-subif)# R1(config-subif)#do sh trafftraffic-shape rate 312000 39000 32000000 32000 1000 320002000 32000 R1(config-subif)#traffic-shape rate 312000 312000 32000do sh traff Interface Se0/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active - 312000 43000 312000 32000 1000 39000 - R1(config-subif)# R1(config-subif)# R1(config-subif)# R1(config-subif)# R1(config-subif)#do sh trafftraffic-shape rate 312000 312000 32000do sh traff traffic-shape rate 312000 39000 32000 R1(config-subif)# RACK98AS>2 [Resuming connection 2 to r2 ... ] R2(config-fr-dlci)# R2(config-fr-dlci)#exit R2(config-subif)#exot ^ % Invalid input detected at '^' marker. R2(config-subif)#exit R2(config)#ip access ex PBRto 2V174 R2(config-ext-nacl)#per tcp any 172.22.174.0 0.0.0.63 eq www R2(config-ext-nacl)#per tcp any 172.22.174.0 0.0.0.63 eq www ftp R2(config-ext-nacl)#per tcp any 172.22.174.0 0.0.0.63 eq ftp-0 R2(config-ext-nacl)#per tcp any 172.22.174.0 0.0.0.63 eq ftp-data R2(config-ext-nacl)#per tcp any 172.22.174.0 0.0.0.63 eq ftp-data chocp any 172.22.174.0 0.0.0.63 echo icp any 172.22.174.0 0.0.0.63 echocpmp any 172.22.174.0 0.0.0.63 echo R2(config-ext-nacl)# R2(config-ext-nacl)# R2(config-ext-nacl)#exit R2(config)#route-0 map PBR2V174 R2(config-route-map)#match ip add ? <1-199> IP access-list number <1300-2699> IP access-list number (expanded range) WORD IP access-list name prefix-list Match entries of prefix-lists R2(config-route-map)#match ip add PBR2V174 R2(config-route-map)#set ? as-path Prepend string for a BGP AS-path attribute automatic-tag Automatically compute TAG value clns OSI summary address comm-list set BGP community list (for deletion) community BGP community attribute dampening Set BGP route flap dampening parameters default Set default information extcommunity BGP extended community attribute interface Output interface ip IP specific information ipv6 IPv6 specific information level Where to import route local-preference BGP local preference path attribute metric Metric value for destination routing protocol metric-type Type of metric for destination routing protocol mpls-label Set MPLS label for prefix nlri BGP NLRI type origin BGP origin code tag Tag value for destination routing protocol traffic-index BGP traffic classification number for accounting vrf Define VRF name weight BGP weight for routing table --More-- R2(config-route-map)#set ip ne R2(config-route-map)#set ip next-hop ? A.B.C.D IP address of next hop dynamic application dynamically sets next hop peer-address Use peer address (for BGP only) recursive Recursive next-hop verify-availability Verify if nexthop is reachable R2(config-route-map)#set ip next-hop 172.22.142.1 R2(config-route-map)#int fa 0/0 R2(config-if)#ip po R2(config-if)#ip policy rou R2(config-if)#ip policy route-map PBR2V174 ? R2(config-if)#ip policy route-map PBR2V174 R2(config-if)#int s0/2 R2(config-if)#PBR2V174int s0/2p policy route-map PBR2V174 R2(config-if)#int s0/0.1 R2(config-subif)#int s0/0.1p policy route-map PBR2V174 R2(config-subif)#do deb ip a pol Policy routing debugging is on R2(config-subif)# RACK98AS>6 [Resuming connection 6 to r6 ... ] R6#p 172.22.174.4 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.22.174.4, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 48/49/52 ms R6# RACK98AS>2 [Resuming connection 2 to r2 ... ] 03:15:56: IP: s=172.2/0.2), len 100, policy routed 03:15:59: IP: Serial0/2 to Serial0/0.2 172.22.142.1 03:15:59: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4, len 100, FIB policy match 03:15:59: CEF-IP-POLICY: fib for address 172.22.142.1 is with flag 0 03:15:59: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4, len 100, policy match 03:15:59: IP: route map PBR2V174, item 10, permit 03:15:59: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4 (Serial0/0.2), len 100, policy routed 03:15:59: IP: Serial0/2 to Serial0/0.2 172.22.142.1f)# R2(config-subif)# R2(config-subif)# R2(config-subif)# R2(config-subif)# 03:16:06: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy rejected(no match) - normal forwarding R2(config-subif)# RACK98AS>6 [Resuming connection 6 to r6 ... ] R6#p 172.22.174.4wr p 172.22.174.4172.22.174.4 172.22.174.4 Trying 172.22.174.4 ... Open User Access Verification Password: RACK98AS>2 [Resuming connection 2 to r2 ... ] 03:16:16: IP: s=17, len 43, FIB policy rejected(no match) - normal forwarding 03:16:17: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4, len 43, FIB policy rejected(no match) - normal forwarding 03:16:17: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4, len 49, FIB policy rejected(no match) - normal forwarding 03:16:17: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4, len 43, FIB policy rejected(no match) - normal forwarding 03:16:17: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4, len 40, FIB policy rejected(no match) - normal forwarding R2(config-subif)# R2(config-subif)#do deb ip polip policy route-map PBR2V174 nt s0/0.1 p policy route-map PBR2V174 nt s0/2 p policy route-map PBR2V174 nt fa 0/0 set ip next-hop 172.22.142.1match ip add PBR2V174 03:16:26: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy rejected(no match) - normal forwarding R2(config-subif)#match ip add PBR2V174route-map PBR2V174 exit route-map PBR2V174 20 R2(config-route-map)# R2(config-route-map)# R2(config-route-map)# R2(config-route-map)# R2(config-route-map)# R2(config-route-map)# R2(config-route-map)# R2(config-route-map)# R2(config-route-map)# R2(config-route-map)# R2(config-route-map)# R2(config-route-map)# R2(config-route-map)# R2(config-route-map)# R2(config-route-map)# RACK98AS>6 [Resuming connection 6 to r6 ... ] Password: Password: % Bad passwords RACK98AS>2 [Resuming connection 2 to r2 ... ] 03:16:36: IP: 03:16:39: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4, len 42, FIB policy rejected - normal forwarding 03:16:39: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4, len 42, FIB policy match 03:16:39: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4, len 42, FIB policy rejected - normal forwarding R2(config-route-map)# R2(config-route-map)# 03:16:41: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4, len 40, FIB policy match 03:16:41: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4, len 40, FIB policy rejected - normal forwarding 03:16:41: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4, len 40, FIB policy match 03:16:41: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4, len 40, FIB policy rejected - normal forwarding R2(config-route-map)# 03:16:46: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy match 03:16:46: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy rejected - normal forwarding R2(config-route-map)# 03:16:56: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy match 03:16:56: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy rejected - normal forwarding R2(config-route-map)# 03:17:06: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy match 03:17:06: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy rejected - normal forwarding R2(config-route-map)# 03:17:16: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy match 03:17:16: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy rejected - normal forwarding R2(config-route-map)#set inter R2(config-route-map)#set interface nu 03:17:26: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy match 03:17:26: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy rejected - normal forwarding R2(config-route-map)#set interface null0 03:17:36: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy match 03:17:36: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy rejected - normal forwarding R2(config-route-map)#do u all All possible debugging has been turned off R2(config-route-map)# RACK98AS>6 [Resuming connection 6 to r6 ... ] [Connection to 172.22.174.4 closed by foreign host] R6# R6# RACK98AS>2 [Resuming connection 2 to r2 ... ] R2(config-route-map)#do exit R2(config)#ip loca R2(config)#ip local po R2(config)#ip local pol R2(config)#ip local policy rout R2(config)#ip local policy route-map 03:16:39: IP: s=172.22.62.6 (Serial0/2),$licy route-map 03:16:39: IP: s=172.22.62.6 (Serial0/2), d=172.22.-map 03:16:39: IP: s=172.22.62.6 (Serial0/2), d=172.22.1 74.4, len:39: IP: s=172.22.62.6 (Serial0/2), d=172.22.174.4, len 42, FIB p=172.22.62.6 (Serial0/2), d=172.22.174.4, len 42, FIB po licy reje.6 (Serial0/2), d=172.22.174.4, len 42, FIB policy rejec ted - nor0/2), d=172.22.174.4, len 42, FIB policy rejected - norm .6 (Seria =172.22.6 :39: IP: -map 03:1 licy rout ip local p ip exitdo u allroute-map PBR2V174 20 R2(config-route-map)#exit R2(config)#ip loca po R2(config)#ip loca pol R2(config)#ip loca policy rou R2(config)#ip loca policy route-map PBR2V174 R2(config)#do deb ip pol Policy routing debugging is on R2(config)# 03:18:53: IP: s=172.22.142.2 (local), d=172.22.142.4, len 100, policy match 03:18:53: IP: route map PBR2V174, item 20, permit 03:18:53: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2), len 100, policy rejected -- normal forwarding 03:18:53: IP: s=172.22.142.2 (local), d=172.22.142.1, len 100, policy match 03:18:53: IP: route map PBR2V174, item 20, permit 03:18:53: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2), len 100, policy rejected -- normal forwarding 03:18:53: IP: s=172.22.142.2 (local), d=172.22.142.4, len 100, policy match 03:18:53: IP: route map PBR2V174, item 20, permit 03:18:53: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2) R2(config)#, len 100, policy rejected -- normal forwarding 03:18:53: IP: s=172.22.142.2 (local), d=172.22.142.1, len 100, policy match 03:18:53: IP: route map PBR2V174, item 20, permit 03:18:53: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2), len 100, policy rejected -- normal forwarding R2(config)# 03:18:55: IP: s=172.22.142.2 (local), d=172.22.142.4, len 59, policy match 03:18:55: IP: route map PBR2V174, item 20, permit 03:18:55: IP: s=172.22.142.2 (local), d=172.22.142.4, len 59, policy rejected -- normal forwarding 03:18:56: IP: s=172.22.142.2 (local), d=172.22.142.4, len 80, policy match 03:18:56: IP: route map PBR2V174, item 20, permit 03:18:56: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2), len 80, policy rejected -- normal forwarding 03:18:56: IP: s=172.22.142.2 (local), d=172.22.142.1, len 80, policy match 03:18:56: IP: route map PBR2V174, item 20, permit 03:18:56: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2) R2(config)#, len 80, policy rejected -- normal forwarding 03:18:56: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy match 03:18:56: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy rejected - normal forwarding R2(config)# 03:18:58: IP: s=172.22.142.2 (local), d=172.22.142.4, len 100, policy match 03:18:58: IP: route map PBR2V174, item 20, permit 03:18:58: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2), len 100, policy rejected -- normal forwarding 03:18:58: IP: s=172.22.142.2 (local), d=172.22.142.1, len 100, policy match 03:18:58: IP: route map PBR2V174, item 20, permit 03:18:58: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2), len 100, policy rejected -- normal forwarding 03:18:58: IP: s=172.22.142.2 (local), d=172.22.142.4, len 100, policy match 03:18:58: IP: route map PBR2V174, item 20, permit 03:18:58: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2) R2(config)#, len 100, policy rejected -- normal forwarding 03:18:58: IP: s=172.22.142.2 (local), d=172.22.142.1, len 100, policy match 03:18:58: IP: route map PBR2V174, item 20, permit 03:18:58: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2), len 100, policy rejected -- normal forwarding R2(config)#do p 03:19:01: IP: s=172.22.142.2 (local), d=172.22.142.4, len 80, policy match 03:19:01: IP: route map PBR2V174, item 20, permit 03:19:01: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2), len 80, policy rejected -- normal forwarding 03:19:01: IP: s=172.22.142.2 (local), d=172.22.142.1, len 80, policy match 03:19:01: IP: route map PBR2V174, item 20, permit 03:19:01: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2), len 80, policy rejected -- normal forwarding R2(config)#do p 03:19:03: IP: s=172.22.142.2 (local), d=172.22.142.4, len 100, policy match 03:19:03: IP: route map PBR2V174, item 20, permit 03:19:03: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2), len 100, policy rejected -- normal forwarding 03:19:03: IP: s=172.22.142.2 (local), d=172.22.142.1, len 100, policy match 03:19:03: IP: route map PBR2V174, item 20, permit 03:19:03: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2), len 100, policy rejected -- normal forwarding 03:19:03: IP: s=172.22.142.2 (local), d=172.22.142.4, len 100, policy match 03:19:03: IP: route map PBR2V174, item 20, permit 03:19:03: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2) R2(config)#do p 17, len 100, policy rejected -- normal forwarding 03:19:03: IP: s=172.22.142.2 (local), d=172.22.142.1, len 100, policy match 03:19:03: IP: route map PBR2V174, item 20, permit 03:19:03: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2), len 100, policy rejected -- normal forwarding R2(config)#do p 172.22.174.4 03:19:06: IP: s=172.22.142.2 (local), d=172.22.142.4, len 80, policy match 03:19:06: IP: route map PBR2V174, item 20, permit 03:19:06: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2), len 80, policy rejected -- normal forwarding 03:19:06: IP: s=172.22.142.2 (local), d=172.22.142.1, len 80, policy match 03:19:06: IP: route map PBR2V174, item 20, permit 03:19:06: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2), len 80, policy rejected -- normal forwarding 03:19:06: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy match 03:19:06: IP: s=172.22.83.1 (Serial0/0.1), d=172.22.84.1, len 100, FIB policy rejected - normal forwarding R2(config)#do p 172.22.174.4 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.22.174.4, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 32/34/37 ms R2(config)# 03:19:07: IP: s=172.22.32.2 (local), d=172.22.32.3, len 59, policy match 03:19:07: IP: route map PBR2V174, item 20, permit 03:19:07: IP: s=172.22.32.2 (local), d=172.22.32.3, len 59, policy rejected -- normal forwarding 03:19:07: IP: s=172.22.32.2 (local), d=172.22.32.3, len 40, policy match 03:19:07: IP: route map PBR2V174, item 20, permit 03:19:07: IP: s=172.22.32.2 (local), d=172.22.32.3, len 40, policy rejected -- normal forwarding 03:19:08: IP: s=172.22.52.2 (local), d=172.22.174.4, len 100, policy match 03:19:08: IP: route map PBR2V174, item 10, permit 03:19:08: IP: s=172.22.52.2 (local), d=172.22.174.4 (Serial0/0.2), len 100, policy routed 03:19:08: IP: local to Serial0/0.2 172.22.142.1 03:19:08: IP: s=172.22.52.2 (local), d=172.22.174.4, len 100, policy match 03:19:08: IP: route map PBR2V174, item 10, permit 03:19:08: IP: s=172.22.52.2 (local), d=172.22.174.4 (Serial0/0.2), len 100, policy routed 03:19:08: IP: local to Serial0/0.2 172.22.142.1 03:19:08: IP: s=172.22.52.2 (local), d=172.22.174.4, len 100, policy match 03:19:08: IP: route map PBR2V174, item 10, permit 03:19:08: IP: s=172.22.52.2 (local), d=172.22.174.4 (Serial0/0.2), len 100, policy routed 03:19:08: IP: local to Serial0/0.2 172.22.142.1 03:19:08: IP: s=172.22.52.2 (local), d=172.22.174.4, len 100, policy match 03:19:08: IP: route map PBR2V174, item 10, permit 03:19:08: IP: s=172.22.52.2 (local), d=172.22.174.4 (Serial0/0.2), len 100, policy routed 03:19:08: IP: local to Serial0/0.2 172.22.142.1 03:19:08: IP: s=172.22.142.2 (local), d=172.22.142.4, len 100, policy match 03:19:08: IP: route map PBR2V174, item 20, permit 03:19:08: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2), len 100, policy rejected -- normal forwarding 03:19:08: IP: s=172.22.142.2 (local), d=172.22.142.1, len 100, policy match 03:19:08: IP: route map PBR2V174, item 20, permit 03:19:08: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2), len 100, policy rejected -- normal forwarding 03:19:08: IP: s=172.22.52.2 (local), d=172.22.174.4, len 100, policy match 03:19:08: IP: route map PBR2V174, item 10, permit 03:19:08: IP: s=172.22.52.2 (local), d=172.22.174.4 (Serial0/0.2), len 100, policy routed 03:19:08: IP: local to Serial0/0.2 172.22.142.1 03:19:08: IP: s=172.22.142.2 (local), d=172.22.142.4, len 100, policy match 03:19:08: IP: route map PBR2V174, item 20, permit 03:19:08: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2), len 100, policy rejected -- normal forwarding 03:19:08: IP: s=172.22.142.2 (local), d=172.22.142.1, len 100, policy match 03:19:08: IP: route map PBR2V174, item 20, permit 03:19:08: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2), len 100, policy rejected -- normal forwarding 03:19:11: IP: s=172.22.142.2 (local), d=172.22.142.4, len 80, policy match 03:19:11: IP: route map PBR2V174, item 20, permit 03:19:11: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2), len 80, policy rejected -- normal forwarding 03:19:11: IP: s=172.22.142.2 (local), d=172.22.142.1, len 80, policy match 03:19:11: IP: route map PBR2V174, item 20, permit 03:19:11: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2), len 80, policy rejected -- normal forwarding R2(config)# R2(config)# 03:19:13: IP: s=172.22.142.2 (local), d=172.22.142.4, len 100, policy match 03:19:13: IP: route map PBR2V174, item 20, permit 03:19:13: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2), len 100, policy rejected -- normal forwarding 03:19:13: IP: s=172.22.142.2 (local), d=172.22.142.1, len 100, policy match 03:19:13: IP: route map PBR2V174, item 20, permit 03:19:13: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2), len 100, policy rejected -- normal forwarding 03:19:13: IP: s=172.22.142.2 (local), d=172.22.142.4, len 100, policy match 03:19:13: IP: route map PBR2V174, item 20, permit 03:19:13: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2) R2(config)#, len 100, policy rejected -- normal forwarding 03:19:13: IP: s=172.22.142.2 (local), d=172.22.142.1, len 100, policy match 03:19:13: IP: route map PBR2V174, item 20, permit 03:19:13: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2), len 100, policy rejected -- normal forwarding R2(config)#do u all All possible debugging has been turned off R2(config)# 03:19:16: IP: s=172.22.142.2 (local), d=172.22.142.4, len 80, policy match 03:19:16: IP: route map PBR2V174, item 20, permit 03:19:16: IP: s=172.22.142.2 (local), d=172.22.142.4 (Serial0/0.2), len 80, policy rejected -- normal forwarding 03:19:16: IP: s=172.22.142.2 (local), d=172.22.142.1, len 80, policy match 03:19:16: IP: route map PBR2V174, item 20, permit 03:19:16: IP: s=172.22.142.2 (local), d=172.22.142.1 (Serial0/0.2), len 80, policy rejected -- normal forwarding R2(config)# R2(config)# R2(config)# R2(config)# R2(config)# R2(config)#ip access R2(config)#ip access-list ex ToVlan172 3 4 R2(config-ext-nacl)#per ip any 172.22.1741 .0 0.0.0.63 R2(config-ext-nacl)#exit R2(config)#class R2(config)#class-map www R2(config-cmap)#match pro R2(config-cmap)#match protocol ? aarp AppleTalk ARP appletalk AppleTalk arp IP ARP bgp Border Gateway Protocol bridge Bridging bstun Block Serial Tunnel cdp Cisco Discovery Protocol citrix Citrix Systems ICA protocol clns ISO CLNS clns_es ISO CLNS End System clns_is ISO CLNS Intermediate System cmns ISO CMNS compressedtcp Compressed TCP (VJ) cuseeme CU-SeeMe desktop video conference decnet DECnet decnet_node DECnet Node decnet_router-l1 DECnet Router L1 decnet_router-l2 DECnet Router L2 dhcp Dynamic Host Configuration dlsw Data Link Switching (Direct encapsulation only) dns Domain Name Server lookup edonkey eDonkey --More-- egp Exterior Gateway Protocol eigrp Enhanced Interior Gateway Routing Protocol exchange MS-RPC for Exchange fasttrack FastTrack Traffic - KaZaA, Morpheus, Grokster... finger Finger ftp File Transfer Protocol gnutella Gnutella Version2 Traffic - BearShare, Shareeza, Morpheus ... gopher Gopher gre Generic Routing Encapsulation h323 H323 Protocol http World Wide Web traffic icmp Internet Control Message imap Internet Message Access Protocol ip IP ipinip IP in IP (encapsulation) ipsec IP Security Protocol (ESP/AH) ipv6 IPV6 ipx Novell IPX irc Internet Relay Chat kazaa2 Kazaa Version 2 kerberos Kerberos l2tp L2F/L2TP tunnel --More-- R2(config-cmap)#match protocol hee ttp ttp R2(config-cmap)#match ? access-group Access group any Any packets class-map Class map cos IEEE 802.1Q/ISL class of service/user priority values destination-address Destination address discard-class Discard behavior identifier dscp Match DSCP in IP(v4) and IPv6 packets fr-de Match on Frame-relay DE bit fr-dlci Match on fr-dlci input-interface Select an input interface to match ip IP specific values mpls Multi Protocol Label Switching specific values not Negate this match result packet Layer 3 Packet length precedence Match Precedence in IP(v4) and IPv6 packets protocol Protocol qos-group Qos-group source-address Source address R2(config-cmap)#match acc R2(config-cmap)#match access-group ? <1-2699> Access list index name Named Access List R2(config-cmap)#match access-group name ToVlan174 R2(config-cmap)#exit R2(config)#do sh ip nbar port t ftp port-map ftp tcp 21 R2(config)# R2(config)# R2(config)# R2(config)# R2(config)# R2(config)# R2(config)#ip nbr ar port ftp tcp 20 R2(config)#ip nbar port ftp tcp 20do sh ip nbar port ftp port-map ftp tcp 20 R2(config)# R2(config)# R2(config)# R2(config)# R2(config)#do sh ip nbar port ftpip nbar port ftp tcp 20 21 R2(config)#ip nbar port ftp tcp 20 21do sh ip nbar port ftp port-map ftp tcp 20 21 R2(config)# R2(config)# R2(config)# R2(config)# R2(config)# R2(config)#clas R2(config)#class-map ftp R2(config-cmap)#class-map ftpdo sh ip nbar port ftpip nbar port ftp tcp 20 21do sh ip nbar port ftp ip nbar port ftp tcp 20do sh ip nbar port ftp exit match access-group name ToVlan174 R2(config-cmap)#match ptro tr r rto R2(config-cmap)#match prto ot R2(config-cmap)#match protocol ftp R2(config-cmap)# R2(config-cmap)# R2(config-cmap)# R2(config-cmap)#exit R2(config)#class R2(config)#class-map ex cho R2(config)#class-map echo R2(config-cmap)#p match prot ech ? % Unrecognized command R2(config-cmap)#match prot ech ? % Unrecognized command R2(config-cmap)#match prot ech ? aarp AppleTalk ARP appletalk AppleTalk arp IP ARP bgp Border Gateway Protocol bridge Bridging bstun Block Serial Tunnel cdp Cisco Discovery Protocol citrix Citrix Systems ICA protocol clns ISO CLNS clns_es ISO CLNS End System clns_is ISO CLNS Intermediate System cmns ISO CMNS compressedtcp Compressed TCP (VJ) cuseeme CU-SeeMe desktop video conference decnet DECnet decnet_node DECnet Node decnet_router-l1 DECnet Router L1 decnet_router-l2 DECnet Router L2 dhcp Dynamic Host Configuration dlsw Data Link Switching (Direct encapsulation only) dns Domain Name Server lookup edonkey eDonkey --More-- egp Exterior Gateway Protocol eigrp Enhanced Interior Gateway Routing Protocol exchange MS-RPC for Exchange fasttrack FastTrack Traffic - KaZaA, Morpheus, Grokster... finger Finger ftp File Transfer Protocol gnutella Gnutella Version2 Traffic - BearShare, Shareeza, Morpheus ... gopher Gopher gre Generic Routing Encapsulation h323 H323 Protocol http World Wide Web traffic icmp Internet Control Message imap Internet Message Access Protocol ip IP ipinip IP in IP (encapsulation) ipsec IP Security Protocol (ESP/AH) ipv6 IPV6 ipx Novell IPX irc Internet Relay Chat kazaa2 Kazaa Version 2 kerberos Kerberos l2tp L2F/L2TP tunnel --More-- R2(config-cmap)#match prot icmp ? R2(config-cmap)#match prot icmp exit R2(config)#ip access-lst e ist ex Echo2Vlan174 R2(config-ext-nacl)#per icmp any 172.22.174.0 0.0.0.63 echo R2(config-ext-nacl)#ex exit R2(config)#clas R2(config)#class-map echo R2(config-cmap)#match ip acc R2(config-cmap)#match access-group name Echo2Vlan174 R2(config-cmap)#exit R2(config)#pol R2(config)#policy-map R2(config)#policy-map ToVlan174 R2(config-pmap)#clas R2(config-pmap)#class WWWW % class map WWW not configured R2(config-pmap)#class WWW www R2(config-pmap-c)#pri R2(config-pmap-c)#priority ? <8-2000000> Kilo Bits per second percent % of total bandwidth R2(config-pmap-c)#priority 100 00 ? <32-2000000> Burst in bytes R2(config-pmap-c)#priority 100 R2(config-pmap-c)#priority 100 1500 R2(config-pmap-c)#exit R2(config-pmap)#class R2(config-pmap)#class ftp R2(config-pmap-c)#n bas R2(config-pmap-c)#bas nm R2(config-pmap-c)#banm R2(config-pmap-c)#bandwidth 65 ? <8-2000000> Kilo Bits per second percent % of total Bandwidth remaining % of the remaining bandwidth R2(config-pmap-c)#bandwidth 64 R2(config-pmap-c)#exit R2(config-pmap)#pol R2(config-pmap)#poli R2(config-pmap)#poli class R2(config-pmap)#class echo R2(config-pmap-c)#pol R2(config-pmap-c)#police ? <8000-2000000000> Bits per second cir Committed information rate rate Specify police rate R2(config-pmap-c)#police 64000 ? <1000-512000000> Burst bytes bc Conform burst conform-action action when rate is less than conform burst pir Peak Information Rate R2(config-pmap-c)#police 64000 co R2(config-pmap-c)#police 64000 conform-action ? drop drop packet exceed-action action when rate is within conform and conform + exceed burst set-clp-transmit set atm clp and send it set-discard-class-transmit set discard-class and send it set-dscp-transmit set dscp and send it set-frde-transmit set FR DE and send it set-mpls-exp-imposition-transmit set exp at tag imposition and send it set-mpls-exp-topmost-transmit set exp on topmost label and send it set-prec-transmit rewrite packet precedence and send it set-qos-transmit set qos-group and send it transmit transmit packet R2(config-pmap-c)#police 64000 conform-action se R2(config-pmap-c)#police 64000 conform-action set-p R2(config-pmap-c)#police 64000 conform-action set-prec-transmit 3 ? exceed-action action when rate is within conform and conform + exceed burst R2(config-pmap-c)#police 64000 conform-action set-prec-transmit 3 ex R2(config-pmap-c)#$0 conform-action set-prec-transmit 3 exceed-action ? drop drop packet set-clp-transmit set atm clp and send it set-discard-class-transmit set discard-class and send it set-dscp-transmit set dscp and send it set-frde-transmit set FR DE and send it set-mpls-exp-imposition-transmit set exp at tag imposition and send it set-mpls-exp-topmost-transmit set exp on topmost label and send it set-prec-transmit rewrite packet precedence and send it set-qos-transmit set qos-group and send it transmit transmit packet R2(config-pmap-c)#$0 conform-action set-prec-transmit 3 exceed-action se R2(config-pmap-c)#$0 conform-action set-prec-transmit 3 exceed-action set-p R2(config-pmap-c)#$-prec-transmit 3 exceed-action set-prec-transmit 1 R2(config-pmap-c-police)#exit R2(config-pmap-c)#do sh policy-map Policy Map ToVlan174 Class www Strict Priority Bandwidth 100 (kbps) Burst 2500 (Bytes) Class ftp Bandwidth 64 (kbps) Max Threshold 64 (packets) Class echo police cir 64000 bc 2000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 R2(config-pmap-c)# R2(config-pmap-c)# R2(config-pmap-c)# R2(config-pmap-c)# R2(config-pmap-c)#int s 0/0.2 R2(config-subif)#ser R2(config-subif)#service-policy ? input Assign policy-map to the input of an interface output Assign policy-map to the output of an interface R2(config-subif)#service-policy ou R2(config-subif)#service-policy output ToVlan174 CBWFQ : Not supported on subinterfaces R2(config-subif)# R2(config-subif)# R2(config-subif)# R2(config-subif)# R2(config-subif)# R2(config-subif)#exit R2(config)#map R2(config)#map-cl R2(config)#map-class fr R2(config)#map-class frame-relay ToR1 R2(config-map-class)#sermap-class frame-relay ToR1exit service-policy output ToVlan174 I/f Serial0/0.2 DLCI 221 class ftp requested bandwidth 64 (kbps), available only 56 (kbps) R2(config-map-class)# R2(config-map-class)# R2(config-map-class)# R2(config-map-class)# R2(config-map-class)#fram R2(config-map-class)#frame-relay mi R2(config-map-class)#frame-relay mincir 312000 R2(config-map-class)#frame-relay mincir 312000service-policy output ToVlan174 R2(config-map-class)# R2(config-map-class)# R2(config-map-class)# R2(config-map-class)# R2(config-map-class)# R2(config-map-class)# R2(config-map-class)# R2(config-map-class)# R2(config-map-class)# R2(config-map-class)# R2(config-map-class)# R2(config-map-class)#^Z R2#shg = 03:31:01: %SYS-5-CONFIG_I: Configured from console by console R2#shg= pol R2#sh policy-map iu nt R2#sh policy-map interface s 0/0.21 Serial0/0.2: DLCI 221 - Service-policy output: ToVlan174 Class-map: www (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http Match: access-group name ToVlan174 Queueing Strict Priority Output Queue: Conversation 40 Bandwidth 100 (kbps) Burst 2500 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name ToVlan174 Match: protocol ftp Queueing Output Queue: Conversation 41 --More-- Bandwidth 64 (kbps)Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: echo (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Echo2Vlan174 police: cir 64000 bps, bc 2000 bytes conformed 0 packets, 0 bytes; actions: set-prec-transmit 3 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 1 conformed 0 bps, exceed 0 bps Class-map: class-default (match-any) 4 packets, 352 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R2#^x6 % Unknown command or computer name, or unable to find computer address R2# R2# RACK98AS>6 [Resuming connection 6 to r6 ... ] R6#172.22.174.4p 172.22.174.4 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.22.174.4, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/44/48 ms R6# RACK98AS>2 [Resuming connection 2 to r2 ... ] R2#^x6sh policy-map interface s 0/0.2 Serial0/0.2: DLCI 221 - Service-policy output: ToVlan174 Class-map: www (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http Match: access-group name ToVlan174 Queueing Strict Priority Output Queue: Conversation 40 Bandwidth 100 (kbps) Burst 2500 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name ToVlan174 Match: protocol ftp Queueing Output Queue: Conversation 41 --More-- Bandwidth 64 (kbps)Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: echo (match-all) 5 packets, 520 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Echo2Vlan174 police: cir 64000 bps, bc 2000 bytes conformed 5 packets, 520 bytes; actions: set-prec-transmit 3 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 1 conformed 0 bps, exceed 0 bps Class-map: class-default (match-any) 16 packets, 1496 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R2#q RACK98AS>4 [Resuming connection 4 to r4 ... ] R4(config-if)#^Z R4# 03:36:27: %SYS-5-CONFIG_I: Configured from console by console R4# R4# R4# R4#askdfoiasdofihoasijdfoijasodfijoaisjdfoijasodifjasjdf Translating "askdfoiasdofihoasijdfoijasodfijoaisjdfoijasodifjasjdf" Translating "askdfoiasdofihoasijdfoijasodfijoaisjdfoijasodifjasjdf" Translating "askdfoiasdofihoasijdfoijasodfijoaisjdfoijasodifjasjdf" % Unknown command or computer name, or unable to find computer address R4#sh run| | b class class-map match-all af13 match ip dscp af13 class-map match-all af22 match ip dscp af22 class-map match-all prec1 match ip precedence 1 class-map match-all prec2 match ip precedence 2 ! ! policy-map test class af22 class af13 class prec1 class prec2 ! ! ! ! ! ! interface Loopback0 ip address 172.22.84.1 255.255.255.0 --More-- RACK98AS>3 2 [Resuming connection 2 to r2 ... ] R2#conf t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#pol R2(config)#policy-mapo R2(config)#policy-mapo ToVlan174 R2(config-pmap)#clas R2(config-pmap)#class echo R2(config-pmap-c)#class echopolicy-map ToVlan174service-policy output ToVlan174frame-relay mincir 312000 service-policy output ToVlan174map-class frame-relay ToR1 exit map-class frame-relay ToR1exit service-policy output ToVlan174int s 0/0.2 do sh policy-mapexit $-prec-transmit 3 exceed-action set-prec-transmit 1 exceed-action set-prec-transmit 1 2 exceed-action set-prec-transmit 1 R2(config-pmap-c-police)#^Z R2# 03:33:17: %SYS-5-CONFIG_I: Configured from console by console R2#conf tsh policy-map interface s 0/0.2^x6 sh policy-map interface s 0/0.2 Serial0/0.2: DLCI 221 - Service-policy output: ToVlan174 Class-map: www (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http Match: access-group name ToVlan174 Queueing Strict Priority Output Queue: Conversation 40 Bandwidth 100 (kbps) Burst 2500 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name ToVlan174 Match: protocol ftp Queueing Output Queue: Conversation 41 --More-- Bandwidth 64 (kbps)Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: echo (match-all) 5 packets, 520 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Echo2Vlan174 police: cir 64000 bps, bc 2000 bytes conformed 5 packets, 520 bytes; actions: set-prec-transmit 2 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 1 conformed 0 bps, exceed 0 bps Class-map: class-default (match-any) 35 packets, 3208 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R2# RACK98AS>6 [Resuming connection 6 to r6 ... ] R6# R6#p 172.22.174.4 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.22.174.4, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/44/44 ms R6#p 172.22.174.4 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.22.174.4, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/45/48 ms R6#p 172.22.174.4 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.22.174.4, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/45/48 ms R6#^x4 % Unknown command or computer name, or unable to find computer address R6# R6# RACK98AS>4 [Resuming connection 4 to r4 ... ] ip ospf 1 area 0 --More-- R4#sh run | b class class-map match-all af13 match ip dscp af13 class-map match-all af22 match ip dscp af22 class-map match-all prec1 match ip precedence 1 class-map match-all prec2 match ip precedence 2 ! ! policy-map test class af22 class af13 class prec1 class prec2 ! ! ! ! ! ! interface Loopback0 ip address 172.22.84.1 255.255.255.0 --More-- R4#sh pol R4#sh policy-map R4#sh policy-map inter fa0/0 1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 15 packets, 1710 bytes 5 minute offered rate 0 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 3919 packets, 299374 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4#6 Trying 6... % Destination unreachable; gateway or host down % Unknown command or computer name, or unable to find computer address R4# R4# RACK98AS>6 [Resuming connection 6 to r6 ... ] R6#^x4p 172.22.174.4 repl 100000000 Type escape sequence to abort. Sending 100000000, 100-byte ICMP Echos to 172.22.174.4, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!! RACK98AS>4 [Resuming connection 4 to r4 ... ] R4#6 Trying 6... % Destination unreachable; gateway or host down % Unknown command or computer name, or unable to find computer address R4#6sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 110 packets, 12540 bytes 5 minute offered rate 0 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 3937 packets, 300706 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4#sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 157 packets, 17898 bytes 5 minute offered rate 0 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 3938 packets, 300780 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4#sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 190 packets, 21660 bytes 5 minute offered rate 2000 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 3938 packets, 300780 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4#sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 222 packets, 25308 bytes 5 minute offered rate 2000 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 3940 packets, 300928 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4#sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 253 packets, 28842 bytes 5 minute offered rate 2000 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 3941 packets, 301002 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4#sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 286 packets, 32604 bytes 5 minute offered rate 2000 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 3941 packets, 301002 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4#sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 322 packets, 36708 bytes 5 minute offered rate 2000 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 3943 packets, 301150 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4# RACK98AS>6 [Resuming connection 6 to r6 ... ] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!. Success rate is 99 percent (599/600), round-trip min/avg/max = 44/45/152 ms R6#p 172.22.174.4 rep 100000000 time 0 Type escape sequence to abort. Sending 100000000, 100-byte ICMP Echos to 172.22.174.4, timeout is 0 seconds: ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... .............................. RACK98AS>4 [Resuming connection 4 to r4 ... ] R4#sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 227 packets, 25878 bytes 5 minute offered rate 2000 bps Match: ip precedence 1 Class-map: prec2 (match-all) 895 packets, 102030 bytes 5 minute offered rate 8000 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 3959 packets, 302334 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4#sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 341 packets, 38874 bytes 5 minute offered rate 2000 bps Match: ip precedence 1 Class-map: prec2 (match-all) 1016 packets, 115824 bytes 5 minute offered rate 8000 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 3959 packets, 302334 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4#sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 867 packets, 98838 bytes 5 minute offered rate 6000 bps Match: ip precedence 1 Class-map: prec2 (match-all) 1574 packets, 179436 bytes 5 minute offered rate 12000 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 3965 packets, 302778 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4#sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 1106 packets, 126084 bytes 5 minute offered rate 6000 bps Match: ip precedence 1 Class-map: prec2 (match-all) 1829 packets, 208506 bytes 5 minute offered rate 12000 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 3967 packets, 302926 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4# RACK98AS>6 [Resuming connection 6 to r6 ... ] ..................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... .......................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... .. Success rate is 0 percent (0/28142) R6#p 172.22.174.4 rep 100000000 time 0 Type escape sequence to abort. Sending 100000000, 100-byte ICMP Echos to 172.22.174.4, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!. Success rate is 99 percent (186/187), round-trip min/avg/max = 44/45/56 ms R6# RACK98AS>7 [Resuming connection 7 to r7 ... ] R7-FS#sh pol R7-FS#sh policy-ma[ R7-FS#sh policy-ma[ ^ % Invalid input detected at '^' marker. R7-FS#sh policy-ma[ p Policy Map test Class af22 Class af13 Class prec1 Class prec2 R7-FS#sh policy-map fa 0/0 ^ % Invalid input detected at '^' marker. R7-FS#sh policy-map fa 0/0ifa 0/0nfa 0/0tfa 0/0 fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 4030 packets, 307603 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R7-FS# RACK98AS>6 [Resuming connection 6 to r6 ... ] R6#p 172.22.174.4 rep 100000000 rep 100000000 7 rep 100000000 Type escape sequence to abort. Sending 100000000, 100-byte ICMP Echos to 172.22.174.7, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! RACK98AS>7 [Resuming connection 7 to r7 ... ] R7-FS#sh policy-map int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 66 packets, 7524 bytes 5 minute offered rate 1000 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 4039 packets, 308269 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R7-FS# RACK98AS>9 [Resuming connection 9 to s2 ... ] 02:18:17: S2#sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More-- d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 Dscp-dscp mutation map: Default DSCP Mutation Map: --More-- d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 S2#conf t Enter configuration commands, one per line. End with CNTL/Z. S2(config)#mls qos m dsc S2(config)#mls qos dsc S2(config)#mls qos ds ? aggregate-policer Assign aggregate policer cos Configure CoS setting map Define QoS mapping min-reserve Configure min-reserve buffers S2(config)#mls qos mpa ap S2(config)#mls qos map ? cos-dscp Map COS to DSCP dscp-cos Map DSCP to COS dscp-mutation Configure dscp-mutation map dscp-switch-priority Map DSCP to switch priority ip-prec-dscp DSCP values for IP precedences 0-7 policed-dscp Map DSCP to policed DSCP S2(config)#mls qos map dsc S2(config)#mls qos map dscp-m S2(config)#mls qos map dscp-mutation ? WORD DSCP mutation map name S2(config)#mls qos map dscp-mutation ToR4 ? <0-63> DSCP values separated by spaces (up to 8 values total) S2(config)#mls qos map dscp-mutation ToR4 8 ? <0-63> DSCP values separated by spaces (up to 8 values total) to Specify egress DSCPs S2(config)#mls qos map dscp-mutation ToR4 8 to 14 S2(config)#mls qos map dscp-mutation ToR4 8 to 14 16 to 20 S2(config)#do sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More-- d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 Dscp-dscp mutation map: ToR4: --More-- d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 14 09 1 : 10 11 12 13 14 15 20 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-dscp mutation map: Default DSCP Mutation Map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 S2(config)#do sh run oi o int trun Port Mode Encapsulation Status Native vlan Fa0/5 on isl trunking 1 Fa0/12 on 802.1q trunking 1 Fa0/13 on 802.1q trunking 1 Fa0/14 desirable n-isl trunking 1 Po1 on 802.1q trunking 1 Port Vlans allowed on trunk Fa0/5 1-4094 Fa0/12 1-4094 Fa0/13 1-4094 Fa0/14 1-4094 Po1 1-4094 Port Vlans allowed and active in management domain Fa0/5 1,3,52,174 Fa0/12 1,3,52,174 Fa0/13 1,3,52,174 Fa0/14 1,3,52,174 Po1 1,3,52,174 Port Vlans in spanning tree forwarding state and not pruned --More-- S2(config)#do sh ether sum Flags: D - down P - in port-channel I - stand-alone s - suspended H - Hot-standby (LACP only) R - Layer3 S - Layer2 U - in use f - failed to allocate aggregator u - unsuitable for bundling w - waiting to be aggregated d - default port Number of channel-groups in use: 1 Number of aggregators: 1 Group Port-channel Protocol Ports ------+-------------+-----------+----------------------------------------------- 1 Po1(SU) PAgP Fa0/22(P) Fa0/23(P) Fa0/24(P) S2(config)#int ch port S2(config)#int port-ch S2(config)#int port-channel 1 S2(config-if)#mls qos ? % Unrecognized command S2(config-if)#mls qos exit S2(config)#int rage fa 0/22 -24 ^ % Invalid input detected at '^' marker. S2(config)#int rage fa 0/22 -24nge fa 0/22 -24 S2(config-if-range)#mls qos > ? cos Configure interface COS parameters dscp-mutation Apply DSCP-DSCP map to DSCP trusted port monitor Collect QoS statistics trust Configure trust state of interface S2(config-if-range)#mls qos dsc S2(config-if-range)#mls qos dscp-mutation ToR4 S2(config-if-range)#do sh mls qos int fa 0/22 FastEthernet0/22 QoS is disabled. pass-through mode When QoS is enabled, following settings will be applied trust state: not trusted trust mode: not trusted COS override: dis default COS: 0 DSCP Mutation Map: ToR4 Trust device: none S2(config-if-range)#mls qos tru S2(config-if-range)#mls qos trust ? cos Classify by packet COS device trusted device class dscp Classify by packet DSCP ip-precedence Classify by packet IP precedence S2(config-if-range)#mls qos trust dsc S2(config-if-range)#mls qos trust dscp S2(config-if-range)#exit S2(config)#mls qos QoS: ensure flow-control on all interfaces are OFF for proper operation. S2(config)# S2(config)# S2(config)# S2(config)#mls qosexit mls qos trust dscp do sh mls qos int fa 0/22 FastEthernet0/22 trust state: trust dscp trust mode: trust dscp COS override: dis default COS: 0 DSCP Mutation Map: ToR4 Trust device: none S2(config)# S2(config)# S2(config)# S2(config)# S2(config)# RACK98AS>6 [Resuming connection 6 to r6 ... ] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!! RACK98AS>7 [Resuming connection 7 to r7 ... ] R7-FS#sh policy-map int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: af22 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 12438 packets, 1417932 bytes 5 minute offered rate 19000 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 4409 packets, 335649 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R7-FS# RACK98AS>6 [Resuming connection 6 to r6 ... ] !!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!. Success rate is 99 percent (12759/12760), round-trip min/avg/max = 44/45/156 ms R6#p 172.22.174.7 rep 1000000004 rep 100000000 time 0 Type escape sequence to abort. Sending 100000000, 100-byte ICMP Echos to 172.22.174.4, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!! RACK98AS>4 [Resuming connection 4 to r4 ... ] R4#sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 62 packets, 7068 bytes 5 minute offered rate 2000 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 2157 packets, 245898 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 3146 packets, 358644 bytes 5 minute offered rate 0 bps Match: ip precedence 2 --More-- R4#sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 236 packets, 26904 bytes 5 minute offered rate 2000 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 2157 packets, 245898 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 3146 packets, 358644 bytes 5 minute offered rate 0 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 4441 packets, 337999 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4#sh policy-map inter fa0/16 sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 396 packets, 45144 bytes 5 minute offered rate 4000 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 2157 packets, 245898 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 3146 packets, 358644 bytes 5 minute offered rate 0 bps Match: ip precedence 2 --More-- R4# RACK98AS>6 [Resuming connection 6 to r6 ... ] !!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!. Success rate is 99 percent (584/585), round-trip min/avg/max = 44/45/104 ms R6#p 172.22.174.4 rep 1000000007 rep 1000000004 rep 100000000 time 0 Type escape sequence to abort. Sending 100000000, 100-byte ICMP Echos to 172.22.174.4, timeout is 0 seconds: ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ................................. RACK98AS>4 [Resuming connection 4 to r4 ... ] R4#sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 1105 packets, 125970 bytes 5 minute offered rate 8000 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 454 packets, 51756 bytes 5 minute offered rate 2000 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 2157 packets, 245898 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 3146 packets, 358644 bytes 5 minute offered rate 0 bps Match: ip precedence 2 --More-- R4#[Ash policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 1498 packets, 170772 bytes 5 minute offered rate 8000 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 823 packets, 93822 bytes 5 minute offered rate 2000 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 2157 packets, 245898 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 3146 packets, 358644 bytes 5 minute offered rate 0 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 4461 packets, 339479 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4#sh policy-map inter fa0/1 FastEthernet0/1 Service-policy input: test Class-map: af22 (match-all) 1752 packets, 199728 bytes 5 minute offered rate 12000 bps Match: ip dscp af22 (20) Class-map: af13 (match-all) 1061 packets, 120954 bytes 5 minute offered rate 6000 bps Match: ip dscp af13 (14) Class-map: prec1 (match-all) 2157 packets, 245898 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: prec2 (match-all) 3146 packets, 358644 bytes 5 minute offered rate 0 bps Match: ip precedence 2 --More-- Class-map: class-default (match-any) 4462 packets, 339553 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R4#do sh run | \ do sh ru n | b class ^ % Invalid input detected at '^' marker. R4#do sh run | b classdo sh run | b class sh run | b class sh run | b class class-map match-all af13 match ip dscp af13 class-map match-all af22 match ip dscp af22 class-map match-all prec1 match ip precedence 1 class-map match-all prec2 match ip precedence 2 ! ! policy-map test class af22 class af13 class prec1 class prec2 ! ! ! ! ! ! interface Loopback0 ip address 172.22.84.1 255.255.255.0 --More-- ip ospf 1 area 0 ! interface Loopback1 no ip address ipv6 address 2006:4:4::/128 ipv6 ospf 1 area 0 ! interface Tunnel0 no ip address ipv6 address 2005:34:34::4/64 ipv6 ospf 1 area 0 keepalive 10 3 tunnel source Loopback0 tunnel destination 172.22.83.1 tunnel mode ipv6ip ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 --More-- ip address 172.22.174.4 255.255.255.192 duplex auto speed auto service-policy input test ! interface Serial0/0/0 ip address 172.22.142.4 255.255.255.0 encapsulation frame-relay ip ospf message-digest-key 1 md5 CISCO ip ospf network point-to-point ip ospf hello-interval 60 ip ospf 1 area 0 ipv6 address 2005:124:124::4/64 ipv6 address FE80::4 link-local ipv6 ospf network point-to-point ipv6 ospf 1 area 124 traffic-shape rate 256000 7936 7936 1000 frame-relay map ipv6 FE80::2 422 broadcast frame-relay map ip 172.22.142.1 422 frame-relay map ip 172.22.142.2 422 broadcast frame-relay map ipv6 2005:124:124::1 422 frame-relay map ipv6 2005:124:124::2 422 broadcast ! --More-- R4#