=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2006.03.20 14:20:28 =~=~=~=~=~=~=~=~=~=~=~= Router con0 is now available Press RETURN to get started. Router> RACK9AS>5 [Resuming connection 5 to r5 ... ] S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#vlan 10 S5(config-vlan)#name ToR1 S5(config-vlan)#exit S5(config)#vlan 20 S5(config-vlan)#vlan 20exit name ToR1 2 S5(config-vlan)#exit S5(config)#vlan 34 S5(config-vlan)#name BlueSuese  de S5(config-vlan)#exit S5(config)#int fa 0/1 S5(config-if)#vlan      sw S5(config-if)#switchport v acc S5(config-if)#switchport access vla S5(config-if)#switchport access vlan 10 S5(config-if)# RACK9AS>6 [Resuming connection 6 to r6 ... ] S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int s fa 0/2 S6(config-if)#sw S6(config-if)#switchport mo  acc S6(config-if)#switchport access vlan 20 % Access VLAN does not exist. Creating vlan 20 S6(config-if)#do sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/1, Fa0/3, Fa0/4, Fa0/5 Fa0/6, Fa0/7, Fa0/8, Fa0/9 Fa0/10, Fa0/11, Fa0/12, Fa0/13 Fa0/14, Fa0/15, Fa0/16, Fa0/17 Fa0/18, Fa0/19, Fa0/20, Fa0/21 Fa0/22, Fa0/23, Gi0/1, Gi0/2 20 VLAN0020 active Fa0/2 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 20 enet 100020 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 tr 101003 1500 - - - - - 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 1005 trnet 101005 1500 - - - ibm - 0 0 --More--   Primary Secondary Type Ports ------- --------- ----------------- ------------------------------------------ S6(config-if)# RACK9AS>5 [Resuming connection 5 to r5 ... ] S5(config-if)#do sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/2, Fa0/3, Fa0/4, Fa0/5 Fa0/6, Fa0/7, Fa0/8, Fa0/9 Fa0/10, Fa0/11, Fa0/12, Fa0/13 Fa0/14, Fa0/15, Fa0/16, Fa0/17 Fa0/18, Fa0/19, Fa0/20, Fa0/21 Fa0/22, Fa0/23, Gi0/1, Gi0/2 10 ToR1 active Fa0/1 20 ToR2 active 34 BlueSuede active 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 10 enet 100010 1500 - - - - - 0 0 20 enet 100020 1500 - - - - - 0 0 34 enet 100034 1500 - - - - - 0 0 --More--   S5(config-if)#sh    do sh int trun Port Mode Encapsulation Status Native vlan Fa0/24 desirable n-isl trunking 1 Port Vlans allowed on trunk Fa0/24 1-4094 Port Vlans allowed and active in management domain Fa0/24 1,10,20,34 Port Vlans in spanning tree forwarding state and not pruned Fa0/24 1,10,20,34 S5(config-if)#  int vlan 10 S5(config-if)#ip add 06:03:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, changed state to up S5(config-if)#ip add 208.28.1.65 255.255.255.240 S5(config-if)#int vlan 20 S5(config-if)#ip add 06:03:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan20, changed state to up S5(config-if)#ip address 208.28.22  1.130 255.255.224222452245224.224 S5(config-if)#do pin 208.28.1.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/201/1000 ms S5(config-if)# S5(config-if)# S5(config-if)# S5(config-if)# RACK9AS> [Resuming connection 5 to r5 ... ] S5(config-if)#int fa 0/3 S5(config-if)#swi S5(config-if)#switchport            sw S5(config-if)#switchport acc vlan 34 S5(config-if)#^Z S5# RACK9AS>6 [Resuming connection 6 to r6 ... ] S6(config-if)#int fa 0/. 4 S6(config-if)#swi S6(config-if)#switchport acc vlan 34 % Access VLAN does not exist. Creating vlan 34 S6(config-if)# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#ping 17.80.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.2, timeout is 2 seconds: .... RACK9AS>5 [Resuming connection 5 to r5 ... ] 06: S5#sh spa S5#sh spanning-tree VLAN0001 Spanning tree enabled protocol ieee Root ID Priority 32769 Address 000a.f49a.3580 Cost 19 Port 24 (FastEthernet0/24) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32769 (priority 32768 sys-id-ext 1) Address 000b.fd8f.7e00 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 15 Interface Role Sts Cost Prio.Nbr Type ---------------- ---- --- --------- -------- -------------------------------- Fa0/8 Desg FWD 100 128.8 Shr Fa0/23 Desg FWD 19 128.23 P2p Fa0/24 Root FWD 19 128.24 P2p --More--   VLAN0010 Spanning tree enabled protocol ieee Root ID Priority 32778 Address 000b.fd8f.7e00 This bridge is the root Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32778 (priority 32768 sys-id-ext 10) Address 000b.fd8f.7e00 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 Interface Role Sts Cost Prio.Nbr Type ---------------- ---- --- --------- -------- -------------------------------- Fa0/1 Desg FWD 100 128.1 Shr Fa0/24 Desg FWD 19 128.24 P2p --More--   VLAN0020 Spanning tree enabled protocol ieee Root ID Priority 32788 Address 000a.f49a.3580 Cost 19 Port 24 (FastEthernet0/24) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32788 (priority 32768 sys-id-ext 20) Address 000b.fd8f.7e00 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 Interface Role Sts Cost Prio.Nbr Type ---------------- ---- --- --------- -------- -------------------------------- Fa0/24 Root FWD 19 128.24 P2p --More--   VLAN0034 Spanning tree enabled protocol ieee Root ID Priority 32802 Address 000a.f49a.3580 Cost 19 Port 24 (FastEthernet0/24) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32802 (priority 32768 sys-id-ext 34) Address 000b.fd8f.7e00 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 15 Interface Role Sts Cost Prio.Nbr Type ---------------- ---- --- --------- -------- -------------------------------- Fa0/3 Desg FWD 19 128.3 P2p Fa0/24 Root FWD 19 128.24 P2p S5# RACK9AS>3 [Resuming connection 3 to r3 ... ] . Su R3#ping 17.80.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.2, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 1/3/4 ms R3# R3# R3# R3# RACK9AS>5 [Resuming connection 5 to r5 ... ] S5#sh run | b inter vlan internal allocation policy ascending ! ! interface FastEthernet0/1 switchport access vlan 10 switchport mode dynamic desirable ! interface FastEthernet0/2 switchport mode dynamic desirable shutdown ! interface FastEthernet0/3 switchport access vlan 34 switchport mode dynamic desirable ! interface FastEthernet0/4 switchport mode dynamic desirable shutdown ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 --More--   S5#sh un    rin  unb    | interface Vlan ^ % Invalid input detected at '^' marker. S5#sh run | interface Vlanbinterface Vlan interface Vlan interface Vlan1 no ip address shutdown ! interface Vlan10 ip address 208.28.1.65 255.255.255.240 ! interface Vlan20 ip address 208.28.1.130 255.255.255.224 ! ip classless ip http server ip http secure-server ! ! ! control-plane ! ! line con 0 exec-timeout 0 0 logging synchronous line vty 0 4 --More--   S5#sh run int fa 0/3 Building configuration... Current configuration : 95 bytes ! interface FastEthernet0/3 switchport access vlan 34 switchport mode dynamic desirable end S5# S5#vlan data % Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. S5(vlan)#sh cu S5(vlan)#sh current VLAN ISL Id: 1 Name: default Media Type: Ethernet VLAN 802.10 Id: 100001 State: Operational MTU: 1500 Backup CRF Mode: Disabled Remote SPAN VLAN: No VLAN ISL Id: 10 Name: ToR1 Media Type: Ethernet VLAN 802.10 Id: 100010 State: Operational MTU: 1500 Backup CRF Mode: Disabled Remote SPAN VLAN: No VLAN ISL Id: 20 Name: ToR2 Media Type: Ethernet VLAN 802.10 Id: 100020 State: Operational --More--   MTU: 1500 Backup CRF Mode: Disabled Remote SPAN VLAN: No VLAN ISL Id: 34 Name: BlueSuede Media Type: Ethernet VLAN 802.10 Id: 100034 State: Operational MTU: 1500 Backup CRF Mode: Disabled Remote SPAN VLAN: No VLAN ISL Id: 1002 Name: fddi-default Media Type: FDDI VLAN 802.10 Id: 101002 State: Operational MTU: 1500 Backup CRF Mode: Disabled Remote SPAN VLAN: No VLAN ISL Id: 1003 --More--   S5(vlan)#^Z S5# RACK9AS>6 [Resuming connection 6 to r6 ... ] S6(config-if)#^Z S6#sh run 06:07:58: %SYS-5-CONFIG_I: Configured from console by console S6#sh run | b int3er   erface FastEthernet0/4 interface FastEthernet0/4 switchport access vlan 34 switchport mode dynamic desirable ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport mode dynamic desirable ! interface FastEthernet0/7 switchport mode dynamic desirable ! interface FastEthernet0/8 switchport mode dynamic desirable ! interface FastEthernet0/9 switchport mode dynamic desirable ! interface FastEthernet0/10 switchport mode dynamic desirable ! interface FastEthernet0/11 --More--   S6#sh reun int fa 0/1 ^ % Invalid input detected at '^' marker. S6#sh reun int fa 0/1 reun int fa 0/1  Building configuration... Current configuration : 68 bytes ! interface FastEthernet0/1 switchport mode dynamic desirable end S6#confi gt ^ % Invalid input detected at '^' marker. S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 0/1 S6(config-if)#ip add 17.57100.2 255.255.255.0 ^ % Invalid input detected at '^' marker. S6(config-if)#ip add 17.57100.2 255.255.255.0.100.2 255.255.255.0 ^ % Invalid input detected at '^' marker. S6(config-if)#no swi S6(config-if)#no switchport S6(config-if)#no switchport ip add 17.57.100.2 255.255.255.0 S6(config-if)#^Z S6# 06:09:22: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up 06:09:23: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up S6# 06:09:23: %SYS-5-CONFIG_I: Configured from console by console S6#ping 17.57.100.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.57.100.1, timeout is 2 seconds: . RACK9AS>1 [Resuming connection 1 to r1 ... ] R1#sh run int e 0/1 Building configuration... Current configuration : 67 bytes ! interface Ethernet0/1 no ip address shutdown half-duplex end R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int e 09/1 ^ % Invalid input detected at '^' marker. R1(config)#int e 09/1   /1 R1(config-if)#ip addres 17.57.100.1 255.255.255.0 R1(config-if)#0no     no shut R1(config-if)#^Z R1# *Mar 1 06:07:40.755: %SYS-5-CONFIG_I: Configured from console by console R1# *Mar 1 06:07:42.097: %LINK-3-UPDOWN: Interface Ethernet0/1, changed state to up *Mar 1 06:07:43.099: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/1, changed state to up R1# RACK9AS>6 [Resuming connection 6 to r6 ... ] .. S6#ping 17.57.100.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.57.100.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/202/1000 ms S6#sh run int fa 0/1 Building configuration... Current configuration : 86 bytes ! interface FastEthernet0/1 no switchport ip address 17.57.100.2 255.255.255.0 end S6# S6# RACK9AS>5 [Resuming connection 5 to r5 ... ] 06 S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#vtp domain Gracek land Changing VTP domain name from NULL to Graceland S5(config)#^Z S5#sh vlan 06:11:38: %SYS-5-CONFIG_I: Configured from console by console S5#sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/2, Fa0/4, Fa0/5, Fa0/6 Fa0/7, Fa0/8, Fa0/9, Fa0/10 Fa0/11, Fa0/12, Fa0/13, Fa0/14 Fa0/15, Fa0/16, Fa0/17, Fa0/18 Fa0/19, Fa0/20, Fa0/21, Fa0/22 Fa0/23, Gi0/1, Gi0/2 10 ToR1 active Fa0/1 20 ToR2 active 34 BlueSuede active Fa0/3 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 10 enet 100010 1500 - - - - - 0 0 20 enet 100020 1500 - - - - - 0 0 34 enet 100034 1500 - - - - - 0 0 --More--   S5#sh vtp domain ^ % Invalid input detected at '^' marker. S5#sh vtp domain      stu atus VTP Version : 2 Configuration Revision : 3 Maximum VLANs supported locally : 1005 Number of existing VLANs : 8 VTP Operating Mode : Server VTP Domain Name : Graceland VTP Pruning Mode : Disabled VTP V2 Mode : Disabled VTP Traps Generation : Disabled MD5 digest : 0xF8 0xC2 0x00 0x78 0x17 0x41 0x4C 0x06 Configuration last modified by 0.0.0.0 at 3-1-93 06:00:46 Local updater ID is 208.28.1.65 on interface Vl10 (lowest numbered VLAN interface found) S5#sh vtp statusdomainlan  VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/2, Fa0/4, Fa0/5, Fa0/6 Fa0/7, Fa0/8, Fa0/9, Fa0/10 Fa0/11, Fa0/12, Fa0/13, Fa0/14 Fa0/15, Fa0/16, Fa0/17, Fa0/18 Fa0/19, Fa0/20, Fa0/21, Fa0/22 Fa0/23, Gi0/1, Gi0/2 10 ToR1 active Fa0/1 20 ToR2 active 34 BlueSuede active Fa0/3 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 10 enet 100010 1500 - - - - - 0 0 20 enet 100020 1500 - - - - - 0 0 34 enet 100034 1500 - - - - - 0 0 --More--   S5# RACK9AS>6 [Resuming connection 6 to r6 ... ] S6#sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/3, Fa0/5, Fa0/6, Fa0/7 Fa0/8, Fa0/9, Fa0/10, Fa0/11 Fa0/12, Fa0/13, Fa0/14, Fa0/15 Fa0/16, Fa0/17, Fa0/18, Fa0/19 Fa0/20, Fa0/21, Fa0/22, Fa0/23 Gi0/1, Gi0/2 10 ToR1 active 20 ToR2 active Fa0/2 34 BlueSuede active Fa0/4 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 10 enet 100010 1500 - - - - - 0 0 20 enet 100020 1500 - - - - - 0 0 34 enet 100034 1500 - - - - - 0 0 --More--   S6# RACK9AS>5 [Resuming connection 5 to r5 ... ] S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#vtp ? domain Set the name of the VTP administrative domain. file Configure IFS filesystem file where VTP configuration is stored. interface Configure interface as the preferred source for the VTP IP updater address. mode Configure VTP device mode password Set the password for the VTP administrative domain pruning Set the adminstrative domain to permit pruning version Set the adminstrative domain to VTP version S5(config)#vtp priu  u S5(config)#vtp pruning ? S5(config)#vtp pruning Pruning switched on S5(config)#vtp pruning  ^Z S5#sh i 06:14:12: %SYS-5-CONFIG_I: Configured from console by console S5#sh int trun Port Mode Encapsulation Status Native vlan Fa0/24 desirable n-isl trunking 1 Port Vlans allowed on trunk Fa0/24 1-4094 Port Vlans allowed and active in management domain Fa0/24 1,10,20,34 Port Vlans in spanning tree forwarding state and not pruned Fa0/24 1,20,34 S5#sh vctp         sh run | i vtp S5# S5# S5#vlan data % Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. S5(vlan)#sh ? changes Show the changes to the database since modification began (or since 'reset') current Show the database installed when modification began (or since 'reset') proposed Show the database as it would be modified if applied S5(vlan)#sh cur VLAN ISL Id: 1 Name: default Media Type: Ethernet VLAN 802.10 Id: 100001 State: Operational MTU: 1500 Backup CRF Mode: Disabled Remote SPAN VLAN: No VLAN ISL Id: 10 Name: ToR1 Media Type: Ethernet VLAN 802.10 Id: 100010 State: Operational MTU: 1500 Backup CRF Mode: Disabled Remote SPAN VLAN: No VLAN ISL Id: 20 Name: ToR2 Media Type: Ethernet VLAN 802.10 Id: 100020 State: Operational --More--   MTU: 1500 Backup CRF Mode: Disabled Remote SPAN VLAN: No VLAN ISL Id: 34 Name: BlueSuede Media Type: Ethernet VLAN 802.10 Id: 100034 State: Operational MTU: 1500 Backup CRF Mode: Disabled Remote SPAN VLAN: No VLAN ISL Id: 1002 Name: fddi-default Media Type: FDDI VLAN 802.10 Id: 101002 State: Operational MTU: 1500 Backup CRF Mode: Disabled Remote SPAN VLAN: No VLAN ISL Id: 1003 --More--   Name: token-ring-default Media Type: Token Ring VLAN 802.10 Id: 101003 State: Operational MTU: 1500 Maximum ARE Hop Count: 7 Maximum STE Hop Count: 7 Backup CRF Mode: Disabled Remote SPAN VLAN: No VLAN ISL Id: 1004 Name: fddinet-default Media Type: FDDI Net VLAN 802.10 Id: 101004 State: Operational MTU: 1500 STP Type: IEEE Backup CRF Mode: Disabled Remote SPAN VLAN: No VLAN ISL Id: 1005 Name: trnet-default Media Type: Token Ring Net --More--   VLAN 802.10 Id: 101005 State: Operational MTU: 1500 STP Type: IBM Backup CRF Mode: Disabled Remote SPAN VLAN: No S5(vlan)#vvtp     tp ? client Set the device to client mode. domain Set the name of the VTP administrative domain. password Set the password for the VTP administrative domain. pruning Set the administrative domain to permit pruning. server Set the device to server mode. transparent Set the device to transparent mode. v2-mode Set the administrative domain to V2 mode. S5(vlan)#vtp     end ^ % Invalid input detected at '^' marker. S5(vlan)#exi APPLY completed. Exiting.... S5#sh vtp stu at VTP Version : 2 Configuration Revision : 4 Maximum VLANs supported locally : 1005 Number of existing VLANs : 8 VTP Operating Mode : Server VTP Domain Name : Graceland VTP Pruning Mode : Enabled VTP V2 Mode : Disabled VTP Traps Generation : Disabled MD5 digest : 0x92 0xB3 0xEE 0x92 0xA8 0xF0 0x4B 0xB4 Configuration last modified by 208.28.1.65 at 3-1-93 06:13:06 Local updater ID is 208.28.1.65 on interface Vl10 (lowest numbered VLAN interface found) S5# S5# S5# S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int fa 0/.24   24 S5(config-if)#swi S5(config-if)#switchport mode ? access Set trunking mode to ACCESS unconditionally dot1q-tunnel set trunking mode to TUNNEL unconditionally dynamic Set trunking mode to dynamically negotiate access or trunk mode trunk Set trunking mode to TRUNK unconditionally S5(config-if)#switchport mode tr S5(config-if)#switchport mode trunk ? S5(config-if)#switchport mode trunk Command rejected: An interface whose trunk encapsulation is "Auto" can not be configured to "trunk" mode. S5(config-if)#swi S5(config-if)#switchport tr S5(config-if)#switchport trunk en S5(config-if)#switchport trunk encapsulation ? dot1q Interface uses only 802.1q trunking encapsulation when trunking isl Interface uses only ISL trunking encapsulation when trunking negotiate Device will negotiate trunking encapsulation with peer on interface S5(config-if)#switchport trunk encapsulation do S5(config-if)#switchport trunk encapsulation dot1q ? S5(config-if)#switchport trunk encapsulation dot1q S5(config-if)#switchport trunk encapsulation dot1q mode trunk  06:19:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to down 06:19:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan20, changed state to down S5(config-if)#switchport mode trunk S5(config-if)# 06:19:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to up S5(config-if)#swi S5(config-if)#switchport tr S5(config-if)#switchport trunk ? allowed Set allowed VLAN characteristics when interface is in trunking mode encapsulation Set trunking encapsulation when interface is in trunking mode native Set trunking native characteristics when interface is in trunking mode pruning Set pruning VLAN characteristics when interface is in trunking mode S5(config-if)#switchport trunk al S5(config-if)#switchport trunk allowed ? vlan Set allowed VLANs when interface is in trunking mode S5(config-if)#switchport trunk allowed vl S5(config-if)#switchport trunk allowed vlan ? WORD VLAN IDs of the allowed VLANs when this port is in trunking mode add add VLANs to the current list all all VLANs except all VLANs except the following none no VLANs remove remove VLANs from the current list S5(config-if)#switchport trunk allowed vlan 10,20,34 S5(config-if)#^Z S5#sh run 06:19:48: %SYS-5-CONFIG_I: Configured from console by console S5#sh run int fa 06:19:50: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan20, changed state to up S5#sh run int fa 0/24 Building configuration... Current configuration : 135 bytes ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport trunk allowed vlan 10,20,34 switchport mode trunk end S5# S5# RACK9AS>6 [Resuming connection 6 to r6 ... ] 06: S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 0/24 S6(config-if)#interface FastEthernet0/24 S6(config-if)# switchport trunk encapsulation dot1q S6(config-if)# switchport trunk allowed vlan 10,20,34 S6(config-if)# switchport mode trunk S6(config-if)#^Z S6#sh int 06:20:34: %SYS-5-CONFIG_I: Configured from console by console S6#sh int trun Port Mode Encapsulation Status Native vlan Fa0/24 on 802.1q trunking 1 Port Vlans allowed on trunk Fa0/24 10,20,34 Port Vlans allowed and active in management domain Fa0/24 10,20,34 Port Vlans in spanning tree forwarding state and not pruned Fa0/24 10,20,34 S6# S6# S6#sh cdp Global CDP information: Sending CDP packets every 60 seconds Sending a holdtime value of 180 seconds Sending CDPv2 advertisements is enabled S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 158 R S 2611XM Fas 0/1 R1 Fas 0/1 155 R 2611 Eth 0/1 S5 Fas 0/24 174 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 131 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 147 R S 2611XM Fas 0/1 R1 Fas 0/1 143 R 2611 Eth 0/1 S5 Fas 0/24 163 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 120 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 145 R S 2611XM Fas 0/1 R1 Fas 0/1 141 R 2611 Eth 0/1 S5 Fas 0/24 160 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 178 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 143 R S 2611XM Fas 0/1 R1 Fas 0/1 140 R 2611 Eth 0/1 S5 Fas 0/24 159 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 176 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 142 R S 2611XM Fas 0/1 R1 Fas 0/1 139 R 2611 Eth 0/1 S5 Fas 0/24 158 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 175 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 140 R S 2611XM Fas 0/1 R1 Fas 0/1 137 R 2611 Eth 0/1 S5 Fas 0/24 156 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 174 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 139 R S 2611XM Fas 0/1 R1 Fas 0/1 136 R 2611 Eth 0/1 S5 Fas 0/24 155 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 172 R 3620 Fas 0/0 S6#trsh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 138 R S 2611XM Fas 0/1 R1 Fas 0/1 134 R 2611 Eth 0/1 S5 Fas 0/24 153 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 171 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 135 R S 2611XM Fas 0/1 R1 Fas 0/1 132 R 2611 Eth 0/1 S5 Fas 0/24 151 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 168 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 134 R S 2611XM Fas 0/1 R1 Fas 0/1 130 R 2611 Eth 0/1 S5 Fas 0/24 149 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 167 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 131 R S 2611XM Fas 0/1 R1 Fas 0/1 127 R 2611 Eth 0/1 S5 Fas 0/24 146 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 164 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 128 R S 2611XM Fas 0/1 R1 Fas 0/1 125 R 2611 Eth 0/1 S5 Fas 0/24 144 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 161 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 126 R S 2611XM Fas 0/1 R1 Fas 0/1 122 R 2611 Eth 0/1 S5 Fas 0/24 141 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 159 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 122 R S 2611XM Fas 0/1 R1 Fas 0/1 178 R 2611 Eth 0/1 S5 Fas 0/24 137 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 155 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 120 R S 2611XM Fas 0/1 R1 Fas 0/1 176 R 2611 Eth 0/1 S5 Fas 0/24 136 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 153 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 177 R S 2611XM Fas 0/1 R1 Fas 0/1 174 R 2611 Eth 0/1 S5 Fas 0/24 133 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 150 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 173 R S 2611XM Fas 0/1 R1 Fas 0/1 169 R 2611 Eth 0/1 S5 Fas 0/24 129 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 146 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 164 R S 2611XM Fas 0/1 R1 Fas 0/1 161 R 2611 Eth 0/1 S5 Fas 0/24 120 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 137 R 3620 Fas 0/0 S6#sh cdp nei Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone Device ID Local Intrfce Holdtme Capability Platform Port ID R2 Fas 0/2 162 R S 2611XM Fas 0/1 R1 Fas 0/1 158 R 2611 Eth 0/1 S5 Fas 0/24 178 S I WS-C3550-2Fas 0/24 R4 Fas 0/4 135 R 3620 Fas 0/0 S6# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s 1/0 R3(config-if)#no fram R3(config-if)#no frame-relay in R3(config-if)#no frame-relay inv R3(config-if)#no frame-relay inverse-arp R3(config-if)#do sh fram map Serial1/0 (up): ip 208.28.1.1 dlci 301(0x12D,0x48D0), dynamic, broadcast,, status defined, active Serial1/0 (up): ip 208.28.1.3 dlci 302(0x12E,0x48E0), dynamic, broadcast,, status defined, active R3(config-if)#fram map ip 208.28.1.1 301 R3(config-if)#fram map ip 208.28.1.1 301   2 302 3 302 R3(config-if)#^Z R3# RACK9AS>2 [Resuming connection 2 to r2 ... ] R2#sh rpun int s 1/0.1 ^ % Invalid input detected at '^' marker. R2#sh rpun int s 1/0.1un int s 1/0.1  Building configuration... Current configuration : 111 bytes ! interface Serial1/0.1 multipoint ip address 208.28.1.3 255.255.255.248 frame-relay interface-dlci 203 end R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0.1 R2(config-subif)#no frame-relay interface-dlci 203 R2(config-subif)#fram map ip 208.28.1.2 203 R2(config-subif)#do p 208.28.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/58/60 ms R2(config-subif)# RACK9AS>3 [Resuming connection 3 to r3 ... ] *M R3#ping 208.28.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/58/60 ms R3# RACK9AS>2 [Resuming connection 2 to r2 ... ] R2(config-subif)#do p 208.28.1.2 1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.1, timeout is 2 seconds: ... RACK9AS>1 [Resuming connection 1 to r1 ... ] R1#sh run int s 1 0/0.1 Building configuration... Current configuration : 118 bytes ! interface Serial0/0.1 point-to-point ip address 208.28.1.1 255.255.255.248 frame-relay interface-dlci 103 end R1# RACK9AS>2 [Resuming connection 2 to r2 ... ] .. R2(config-subif)# R2(config-subif)#exit R2(config)#log buff R2(config)#dpo  o deb ip icmp ICMP packet debugging is on R2(config)# RACK9AS>1 [Resuming connection 1 to r1 ... ] R1#ping 2d08.28      08.28.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.3, timeout is 2 seconds: RACK9AS>2 [Resuming connection 2 to r2 ... ] R2(config)# *Mar 1 06:28:22.494: ICMP: echo reply sent, src 208.28.1.3, dst 208.28.1.1 R2(config)# *Mar 1 06:28:24.481: ICMP: echo reply sent, src 208.28.1.3, dst 208.28.1.1 R2(config)# *Mar 1 06:28:26.484: ICMP: echo reply sent, src 208.28.1.3, dst 208.28.1.1 R2(config)# *Mar 1 06:28:28.488: ICMP: echo reply sent, src 208.28.1.3, dst 208.28.1.1 R2(config)# *Mar 1 06:28:30.507: ICMP: echo reply sent, src 208.28.1.3, dst 208.28.1.1 R2(config)#do u all All possible debugging has been turned off R2(config)#de o deb fram packj  Frame Relay packet debugging is on R2(config)# R2(config)# RACK9AS>1 [Resuming connection 1 to r1 ... ] ..ping 208.28.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.3, timeout is 2 seconds: RACK9AS>2 [Resuming connection 2 to r2 ... ] R2(config)# *Mar 1 06:28:52.331: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:28:52.335: Serial1/0.1:Encaps failed--no map entry link 7(IP) R2(config)# *Mar 1 06:28:54.330: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:28:54.330: Serial1/0.1:Encaps failed--no map entry link 7(IP) R2(config)# *Mar 1 06:28:56.333: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:28:56.333: Serial1/0.1:Encaps failed--no map entry link 7(IP) R2(config)# *Mar 1 06:28:58.341: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:28:58.341: Serial1/0.1:Encaps failed--no map entry link 7(IP) R2(config)# *Mar 1 06:29:00.360: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:29:00.364: Serial1/0.1:Encaps failed--no map entry link 7(IP) R2(config)#int s 1/0.1 R2(config-subif)#int s 1/0.1do deb fram packu all deb ip icmplog buff exit do p 208.28.1.1212fram map ip 208.28.1.2 203 203 1 203 R2(config-subif)#^x1 ^ % Invalid input detected at '^' marker. R2(config-subif)#^x1 RACK9AS>1 [Resuming connection 1 to r1 ... ] ..ping 208.28.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 113/123/136 ms R1# RACK9AS>2 [Resuming connection 2 to r2 ... ] *Ma ^ % Invalid input detected at '^' marker. R2(config-subif)#do sh log Syslog logging: enabled (9 messages dropped, 3 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 67 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 25 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 49 message lines logged --More--   Log Buffer (4096 bytes): *Mar 1 06:28:22.494: ICMP: echo reply sent, src 208.28.1.3, dst 208.28.1.1 *Mar 1 06:28:24.481: ICMP: echo reply sent, src 208.28.1.3, dst 208.28.1.1 *Mar 1 06:28:26.484: ICMP: echo reply sent, src 208.28.1.3, dst 208.28.1.1 *Mar 1 06:28:28.488: ICMP: echo reply sent, src 208.28.1.3, dst 208.28.1.1 *Mar 1 06:28:30.507: ICMP: echo reply sent, src 208.28.1.3, dst 208.28.1.1 *Mar 1 06:28:52.331: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:28:52.335: Serial1/0.1:Encaps failed--no map entry link 7(IP) *Mar 1 06:28:54.330: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:28:54.330: Serial1/0.1:Encaps failed--no map entry link 7(IP) *Mar 1 06:28:56.333: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:28:56.333: Serial1/0.1:Encaps failed--no map entry link 7(IP) *Mar 1 06:28:58.341: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:28:58.341: Serial1/0.1:Encaps failed--no map entry link 7(IP) *Mar 1 06:29:00.360: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:29:00.364: Serial1/0.1:Encaps failed--no map entry link 7(IP) --More--  *Mar 1 06:29:32.725: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:29:32.725: Serial1/0.1(o): dlci 203(0x30B1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:29:32.845: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:29:32.845: Serial1/0.1(o): dlci 203(0x30B1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:29:32.977: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:29:32.977: Serial1/0.1(o): dlci 203(0x30B1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:29:33.114: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:29:33.114: Serial1/0.1(o): dlci 203(0x30B1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:29:33.234: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:29:33.234: Serial1/0.1(o): dlci 203(0x30B1), pkt type 0x800(IP), datagramsize 104 R2(config-subif)#          do pin 208.28.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 116/125/144 ms R2(config-subif)# *Mar 1 06:30:07.542: Serial1/0.1(o): dlci 203(0x30B1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:30:07.590: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 60 *Mar 1 06:30:07.686: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:30:07.686: Serial1/0.1(o): dlci 203(0x30B1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:30:07.802: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:30:07.802: Serial1/0.1(o): dlci 203(0x30B1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:30:07.935: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 R2(config-subif)# *Mar 1 06:30:07.935: Serial1/0.1(o): dlci 203(0x30B1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:30:08.055: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 *Mar 1 06:30:08.055: Serial1/0.1(o): dlci 203(0x30B1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:30:08.171: Serial1/0(i): dlci 203(0x30B1), pkt type 0x800, datagramsize 104 R2(config-subif)#do    ^Z R2# *Mar 1 06:31:06.439: %SYS-5-CONFIG_I: Configured from console by console R2#u all All possible debugging has been turned off R2#deb int fa 0/0 Condition 1 set R2# R2# R2# R2#sh deb Condition 1: interface Fa0/0 (1 flags triggered) Flags: Fa0/0 R2#u all All possible debugging has been turned off R2#u allsh deb Condition 1: interface Fa0/0 (1 flags triggered) Flags: Fa0/0 R2#sh debu all sh debdeb int fa 0/0ndeb int fa 0/0odeb int fa 0/0 deb int fa 0/0 This condition is the last interface condition set. Removing all conditions may cause a flood of debugging messages to result, unless specific debugging flags are first removed. Proceed with removal? [yes/no]: y Condition 1 has been removed R2# R2#sh run int s 1/0.1 Building configuration... Current configuration : 149 bytes ! interface Serial1/0.1 multipoint ip address 208.28.1.3 255.255.255.248 frame-relay map ip 208.28.1.1 203 frame-relay map ip 208.28.1.2 203 end R2# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh run int s 1/0 Building configuration... Current configuration : 224 bytes ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay ip split-horizon no fair-queue frame-relay map ip 208.28.1.1 301 frame-relay map ip 208.28.1.3 302 no frame-relay inverse-arp end R3# R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#^Z R3#ping *Mar 1 06:32:50.145: %SYS-5-CONFIG_I: Configured from console by console R3#ping 208.28.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.2, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) R3#deb fra pack % Ambiguous command: "deb fra pack" R3#deb fra packm pack Frame Relay packet debugging is on R3#deb fram pack pack ping 208.28.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.2, timeout is 2 seconds: *Mar 1 06:33:16.115: Serial1/0:Encaps failed--no map entry link 7(IP). *Mar 1 06:33:18.118: Serial1/0:Encaps failed--no map entry link 7(IP). *Mar 1 06:33:20.122: Serial1/0:Encaps failed--no map entry link 7(IP). *Mar 1 06:33:22.121: Serial1/0:Encaps failed--no map entry link 7(IP). *Mar 1 06:33:24.124: Serial1/0:Encaps failed--no map entry link 7(IP). Success rate is 0 percent (0/5) R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s 1/0 R3(config-if)#fram map i *Mar 1 06:33:33.267: Serial1/0(i): dlci 301(0x48D1), pkt type 0x2000, datagramsize 353 R3(config-if)#fram map ip 208.28.1.2 302 R3(config-if)#^Z R3#config tping 208.28.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 116/118/124 ms R3# *Mar 1 06:33:42.502: %SYS-5-CONFIG_I: Configured from console by console *Mar 1 06:33:43.672: Serial1/0(o): dlci 302(0x48E1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:33:43.716: Serial1/0(i): dlci 302(0x48E1), pkt type 0x800, datagramsize 60 *Mar 1 06:33:43.736: Serial1/0(i): dlci 302(0x48E1), pkt type 0x800, datagramsize 104 *Mar 1 06:33:43.736: Serial1/0(o): dlci 302(0x48E1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:33:43.797: Serial1/0(i): dlci 302(0x48E1), pkt type 0x800, datagramsize 104 *Mar 1 06:33:43.797: Serial1/0(o): dlci 302(0x48E1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:33:43.853: Serial1/0(i): dlci 302(0x48E1), pkt type 0x800, datagramsize 104 *Mar 1 06:33:43.857: Serial1/0(o): dlci 302(0x48E1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:33:43.913: Serial1/0(i): dlci 302(0x48E1), pkt type 0x800, datagramsize 104 *Mar 1 06:33:43.913: Serial1/0(o): dlci 302(0x48E1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:33:43.969: S R3#erial1/0(i): dlci 302(0x48E1), pkt type 0x800, datagramsize 104 *Mar 1 06:33:43.973: Serial1/0(o): dlci 302(0x48E1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:33:44.029: Serial1/0(i): dlci 302(0x48E1), pkt type 0x800, datagramsize 104 *Mar 1 06:33:44.029: Serial1/0(o): dlci 302(0x48E1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:33:44.089: Serial1/0(i): dlci 302(0x48E1), pkt type 0x800, datagramsize 104 *Mar 1 06:33:44.089: Serial1/0(o): dlci 302(0x48E1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:33:44.145: Serial1/0(i): dlci 302(0x48E1), pkt type 0x800, datagramsize 104 *Mar 1 06:33:44.149: Serial1/0(o): dlci 302(0x48E1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:33:44.205: Serial1/0(i): dlci 302(0x48E1), pkt type 0x800, datagramsize 104 *Mar 1 06:33:44.205: Serial1/0(o): dlci 302(0x48E1), pkt type 0x800(IP), datagramsize 104 *Mar 1 06:33:44.265: Serial1/0(i): dlci 302(0x48E1), pkt type 0x800, datagramsize 104 R3# R3#u all All possible debugging has been turned off R3#sh run int s 1/0 Building configuration... Current configuration : 259 bytes ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay ip split-horizon no fair-queue frame-relay map ip 208.28.1.1 301 frame-relay map ip 208.28.1.2 302 frame-relay map ip 208.28.1.3 302 no frame-relay inverse-arp end R3# R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#user R2    One pass For-The-Money R3(config)#222222222222222222222222222222 \]                                RACK9AS>2 [Resuming connection 2 to r2 ... ] R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#user Two pass For-The_ShowShow -Show R2(config)#int s 1/2 R2(config-if)#shut R2(config-if)#en R2(config-if)#encapsulation *Mar 1 06:38:44.842: %LINK-5-CHANGED: Interface Serial1/2, changed state to administratively down *Mar 1 06:38:45.844: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to down R2(config-if)#encapsulation pp R2(config-if)#ppp0    authen pap ? WORD Use an authentication list with this name callback Authenticate remote on callback only callin Authenticate remote on incoming call only callout Authenticate remote on outgoing call only chap Challenge Handshake Authentication Protocol (CHAP) default Use the default authentication list eap Extensible Authentication Protocol (EAP) ms-chap Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) ms-chap-v2 Microsoft CHAP Version 2 (MS-CHAP-V2) one-time Allow use of username*OTP for one-time passwords optional Allow peer to refuse to authenticate R2(config-if)#ppp authen pap   R2(config-if)#ppp pap ? refuse Refuse to authenticate using PAP sent-username Set outbound PAP username wait Wait for caller to authenticate first R2(config-if)#ppp pap sen R2(config-if)#ppp pap sent-username ? WORD Outbound PAP username R2(config-if)#ppp pap sent-username One ? password Set outbound PAP password R2(config-if)#ppp pap sent-username One pas For-The-Money ? LINE R2(config-if)#ppp pap sent-username One pas For-The-Money   R2(config-if)#ppp pap re R2(config-if)#ppp pap refuse R2(config-if)# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Mar R3(config)#int s 1/2 R3(config-if)#enca ppp R3(config-if)#ppp atueh pa      huen pap ^ % Invalid input detected at '^' marker. R3(config-if)#ppp athuen papuen pap uthen pap R3(config-if)#ppp pp ap re R3(config-if)#ppp pap refuse R3(config-if)#ppp pap sw en R3(config-if)#ppp pap sent-username Two pass For-The-Show R3(config-if)# RACK9AS>2 [Resuming connection 2 to r2 ... ] R2(config-if)#de  do deb ppp authen PPP authentication debugging is on R2(config-if)#no shut R2(config-if)# *Mar 1 06:41:57.057: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up R2(config-if)#do *Mar 1 06:41:57.085: Se1/2 PPP: Using default call direction *Mar 1 06:41:57.089: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:41:57.089: Se1/2 PPP: Session handle[24000000] Session id[1] *Mar 1 06:41:57.089: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:41:59.205: Se1/2 PPP: Using default call direction *Mar 1 06:41:59.205: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:41:59.209: Se1/2 PPP: Session handle[C000001] Session id[1] *Mar 1 06:41:59.209: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:01.324: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:03.428: Se1/2 PPP: Using default call direction *Mar 1 06:42:03.428: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:42:03.432: Se1/2 PPP: Session handle[EB000003] Session id[3] *Mar 1 06:42:03.432: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:05.547: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:07.719: Se1/2 PPP: Using default call direction *Mar 1 06:42:07.723: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:42:07.723: Se1/2 PPP: Session handle[F000005] Session id[5] *Mar 1 06:42:07.723: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:09.834: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:11.942: Se1/2 PPP: Using default call direction *Mar 1 06:42:11.946: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:42:11.946: Se1/2 PPP: Session handle[E0000007] Session id[7] *Mar 1 06:42:11.946: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:14.061: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:16.164: Se1/2 PPP: Using default call direction *Mar 1 06:42:16.168: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:42:16.168: Se1/2 PPP: Session handle[CE000009] Session id[9] *Mar 1 06:42:16.168: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:18.284: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:20.395: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:22.507: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:24.614: Se1/2 PPP: Using default call direction *Mar 1 06:42:24.618: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:42:24.618: Se1/2 PPP: Session handle[E800000D] Session id[13] *Mar 1 06:42:24.618: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:26.734: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:28.841: Se1/2 PPP: Using default call direction *Mar 1 06:42:28.841: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:42:28.841: Se1/2 PPP: Session handle[7F00000F] Session id[15] *Mar 1 06:42:28.841: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:30.957: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:33.060: Se1/2 PPP: Using default call direction *Mar 1 06:42:33.064: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:42:33.064: Se1/2 PPP: Session handle[BF000011] Session id[17] *Mar 1 06:42:33.064: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:35.180: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:37.283: Se1/2 PPP: Using default call direction *Mar 1 06:42:37.287: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:42:37.287: Se1/2 PPP: Session handle[6D000013] Session id[19] *Mar 1 06:42:37.287: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:39.403: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:41.510: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:43.626: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:45.741: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:47.852: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:49.964: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:52.071: Se1/2 PPP: Using default call direction *Mar 1 06:42:52.071: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:42:52.071: Se1/2 PPP: Session handle[9400001A] Session id[26] *Mar 1 06:42:52.071: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:54.187: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:56.298: Se1/2 PPP: Using default call direction *Mar 1 06:42:56.298: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:42:56.298: Se1/2 PPP: Session handle[9A00001C] Session id[28] *Mar 1 06:42:56.298: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:42:58.414: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:43:00.525: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:43:02.633: Se1/2 PPP: Using default call direction *Mar 1 06:43:02.633: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:43:02.633: Se1/2 PPP: Session handle[6C00001F] Session id[31] *Mar 1 06:43:02.633: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:43:04.748: Se1/2 PPP: Authorization required R2(config-if)#do u all *Mar 1 06:43:06.856: Se1/2 PPP: Using default call direction *Mar 1 06:43:06.856: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:43:06.856: Se1/2 PPP: Session handle[CA000021] Session id[33] *Mar 1 06:43:06.856: Se1/2 PPP: Authorization required R2(config-if)#do u all All possible debugging has been turned off R2(config-if)#shut R2(config-if)# *Mar 1 06:43:15.333: %LINK-5-CHANGED: Interface Serial1/2, changed state to administratively down R2(config-if)#no ppp pap re R2(config-if)# RACK9AS>3 [Resuming connection 3 to r3 ... ] *M R3(config-if)#ppp pap sent-username Two pass For-The-Showrefuse nppp pap refuse oppp pap refuse  ppp pap refuse  R3(config-if)#ppp authen pap op R3(config-if)#ppp authen pap optional R3(config-if)# RACK9AS>2 [Resuming connection 2 to r2 ... ] R2(config-if)#ppp authen pap op R2(config-if)#dop    deb ppp authen PPP authentication debugging is on R2(config-if)#no shut R2(config-if)# *Mar 1 06:43:53.901: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up *Mar 1 06:43:53.901: Se1/2 PPP: Using default call direction *Mar 1 06:43:53.901: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:43:53.901: Se1/2 PPP: Session handle[67000026] Session id[38] *Mar 1 06:43:53.901: Se1/2 PPP: Authorization required *Mar 1 06:43:53.913: Se1/2 PAP: Using hostname from interface PAP *Mar 1 06:43:53.913: Se1/2 PAP: Using password from interface PAP *Mar 1 06:43:53.913: Se1/2 PAP: O AUTH-REQ id 1 len 22 from "One" *Mar 1 06:43:53.917: Se1/2 PAP: I AUTH-REQ id 1 len 21 from "Two" *Mar 1 06:43:53.917: Se1/2 PAP: Authenticating peer Two *Mar 1 06:43:53.921: Se1/2 PPP: Sent PAP LOGIN Request R2(config-if)# *Mar 1 06:43:53.921: Se1/2 PPP: Received LOGIN Response PASS *Mar 1 06:43:53.921: Se1/2 PPP: Sent LCP AUTHOR Request *Mar 1 06:43:53.925: Se1/2 PPP: Sent IPCP AUTHOR Request *Mar 1 06:43:53.925: Se1/2 LCP: Received AAA AUTHOR Response PASS *Mar 1 06:43:53.925: Se1/2 IPCP: Received AAA AUTHOR Response PASS *Mar 1 06:43:53.929: Se1/2 PAP: O AUTH-ACK id 1 len 5 *Mar 1 06:43:53.929: Se1/2 PAP: I AUTH-ACK id 1 len 5 *Mar 1 06:43:53.929: Se1/2 PPP: Sent CDPCP AUTHOR Request *Mar 1 06:43:53.929: Se1/2 CDPCP: Received AAA AUTHOR Response PASS *Mar 1 06:43:53.933: Se1/2 PPP: Sent IPCP AUTHOR Request R2(config-if)# *Mar 1 06:43:54.930: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up R2(config-if)#shut R2(config-if)# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Ma R3(config-if)#no ppp authen papa  R3(config-if)# RACK9AS>2 [Resuming connection 2 to r2 ... ] *Mar R2(config-if)#no shut R2(config-if)# *Mar 1 06:45:42.010: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up *Mar 1 06:45:42.010: Se1/2 PPP: Using default call direction *Mar 1 06:45:42.010: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:45:42.010: Se1/2 PPP: Session handle[A0000027] Session id[39] *Mar 1 06:45:42.010: Se1/2 PPP: Authorization required *Mar 1 06:45:42.022: Se1/2 PAP: I AUTH-REQ id 2 len 21 from "Two" *Mar 1 06:45:42.022: Se1/2 PAP: Authenticating peer Two *Mar 1 06:45:42.026: Se1/2 PPP: Sent PAP LOGIN Request *Mar 1 06:45:42.026: Se1/2 PPP: Received LOGIN Response PASS *Mar 1 06:45:42.026: Se1/2 PPP: Sent LCP AUTHOR Request *Mar 1 06:45:42.030: Se1/2 PPP: Sent IPCP AUTHOR Request R2(config-if)# *Mar 1 06:45:42.030: Se1/2 LCP: Received AAA AUTHOR Response PASS *Mar 1 06:45:42.030: Se1/2 IPCP: Received AAA AUTHOR Response PASS *Mar 1 06:45:42.030: Se1/2 PAP: O AUTH-ACK id 2 len 5 *Mar 1 06:45:42.034: Se1/2 PPP: Sent CDPCP AUTHOR Request *Mar 1 06:45:42.034: Se1/2 CDPCP: Received AAA AUTHOR Response PASS *Mar 1 06:45:42.038: Se1/2 PPP: Sent IPCP AUTHOR Request *Mar 1 06:45:43.032: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up R2(config-if)#^x3 ^ % Invalid input detected at '^' marker. R2(config-if)# R2(config-if)# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Mar R3(config-if)#do sh run int s 1/2 Building configuration... Current configuration : 136 bytes ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 encapsulation ppp ppp pap sent-username Two password 0 For-The-Show end R3(config-if)# RACK9AS>2 [Resuming connection 2 to r2 ... ] R2(config-if)# RACK9AS>2 3 [Resuming connection 3 to r3 ... ] R3(config-if)#do sh run int s 1/2no ppp authen pap no ppp authen pap  ppp authen pap  ppp authen pap op R3(config-if)#^Z R3# RACK9AS>2 [Resuming connection 2 to r2 ... ] *Mar R2(config-if)#^Z R2#sh *Mar 1 06:47:28.332: %SYS-5-CONFIG_I: Configured from console by console R2#sh run | b user username Two password 0 For-The-Show ! ! ! ! ! ! ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 208.28.1.129 255.255.255.224 duplex auto speed auto --More--  ! interface Serial1/0 no ip address encapsulation frame-relay no fair-queue ! interface Serial1/0.1 multipoint ip address 208.28.1.3 255.255.255.248 frame-relay map ip 208.28.1.1 203 frame-relay map ip 208.28.1.2 203 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 encapsulation ppp clock rate 64000 ppp authentication pap optional ppp pap sent-username One password 0 For-The-Money ! interface Serial1/3 --More--   R2# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Mar R3#sh run | b user username One password 0 For-The-Money ! ! ! ! ! ! ! ! interface FastEthernet0/0 ip address 17.80.1.1 255.255.255.0 duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto --More--  ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay ip split-horizon no fair-queue frame-relay map ip 208.28.1.1 301 frame-relay map ip 208.28.1.2 302 frame-relay map ip 208.28.1.3 302 no frame-relay inverse-arp ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 encapsulation ppp ppp authentication pap optional ppp pap sent-username Two password 0 For-The-Show ! interface Serial1/3 no ip address --More--   R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#user R1 pass PinkCakku   dillax c R3(config)#^x3 1    RACK9AS>1 [Resuming connection 1 to r1 ... ] R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#user R1 pass PinkCadillac pass PinkCadillac 3 pass PinkCadillac R1(config)#int s 0/.0  0.1 R1(config-subif)#encap  R1(config-subif)#encap Ppp ? % Unrecognized command R1(config-subif)#encap Ppp           int s 0/0.  R1(config-if)#enc ? atm-dxi ATM-DXI encapsulation bstun Block Serial tunneling (BSTUN) frame-relay Frame Relay networks hdlc Serial HDLC synchronous lapb LAPB (X.25 Level 2) ppp Point-to-Point protocol sdlc SDLC sdlc-primary SDLC (primary) sdlc-secondary SDLC (secondary) smds Switched Megabit Data Service (SMDS) stun Serial tunneling (STUN) uts Unisys TS x25 X.25 R1(config-if)#enc ppp ? R1(config-if)#enc ppp         int s 0/0.1 R1(config-subif)#do sh run int s 1 0/0.1 Building configuration... Current configuration : 118 bytes ! interface Serial0/0.1 point-to-point ip address 208.28.1.1 255.255.255.248 frame-relay interface-dlci 103 end R1(config-subif)#no ip address 208.28.1.1 255.255.255.248 R1(config-subif)#fram frame-relay interface-dlci 103fram frame-relay interface-dlci 103  frame-relay interface-dlci 103  frame-relay interface-dlci 103  frame-relay interface-dlci 103  frame-relay interface-dlci 103 ? cisco Use CISCO Encapsulation ietf Use RFC1490/RFC2427 Encapsulation ppp Use RFC1973 Encapsulation to support PPP over FR protocol Optional protocol information for remote end R1(config-subif)# frame-relay interface-dlci 103 ppp ? Virtual-Template Virtual Template interface R1(config-subif)# frame-relay interface-dlci 103 ppp vi ? <1-200> Virtual-Template interface number R1(config-subif)# frame-relay interface-dlci 103 ppp vi 1 ? R1(config-subif)# frame-relay interface-dlci 103 ppp vi 1 R1(config-fr-dlci)# *Mar 1 06:55:30.523: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up R1(config-fr-dlci)#exit R1(config-subif)#exit R1(config)#ui  int R1(config)#interface vi R1(config)#interface vir R1(config)#interface virtual-t R1(config)#interface virtual-te R1(config)#interface virtual-template 1 R1(config-if)# ip address 208.28.1.1 255.255.255.248 R1(config-if)#encap ppp ? R1(config-if)#encap ppp R1(config-if)#do sh run int vir sh run int vir % Incomplete command. R1(config-if)#do sh run int vir 1 % Ambiguous command: "sh run int vir 1" R1(config-if)#do sh run int vir 1  tualk-  -temp 1 Building configuration... Current configuration : 74 bytes ! interface Virtual-Template1 ip address 208.28.1.1 255.255.255.248 end R1(config-if)#ppp authen chap R1(config-if)#ppp authen chap ? WORD Use an authentication list with this name callback Authenticate remote on callback only callin Authenticate remote on incoming call only callout Authenticate remote on outgoing call only default Use the default authentication list eap Extensible Authentication Protocol (EAP) ms-chap Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) ms-chap-v2 Microsoft CHAP Version 2 (MS-CHAP-V2) one-time Allow use of username*OTP for one-time passwords optional Allow peer to refuse to authenticate pap Password Authentication Protocol (PAP) R1(config-if)#ppp authen chap R1(config-if)# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3(config)#con   oi  int fa      s1/0 R3(config-if)#do sh erun      run int s 1/0 Building configuration... Current configuration : 259 bytes ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay ip split-horizon no fair-queue frame-relay map ip 208.28.1.1 301 frame-relay map ip 208.28.1.2 302 frame-relay map ip 208.28.1.3 302 no frame-relay inverse-arp end R3(config-if)#no frame-relay map ip 208.28.1.1 301 R3(config-if)#fram int R3(config-if)#fram inter R3(config-if)#fram interface-df  d R3(config-if)#fram interface-dlci 301 ? ppp Use RFC1973 Encapsulation to support PPP over FR switched Define a switched DLCI R3(config-if)#fram interface-dlci 301 ppp vir R3(config-if)#fram interface-dlci 301 ppp virtual-Template 1 R3(config-fr-dlci)# *Mar 1 06:57:00.851: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up R3(config-fr-dlci)#exit R3(config-if)#e *Mar 1 06:57:01.933: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to up R3(config-if)#exut ^ % Invalid input detected at '^' marker. R3(config-if)#exit R3(config)#int viru tu R3(config)#int virtual-temp 1 R3(config-if)#ip add un s 1/0 ^ % Invalid input detected at '^' marker. R3(config-if)#ip add un s 1/0s 1/0 0 0    n R3(config-if)#ip add unn? % Unrecognized command R3(config-if)#ip add unn   ? A.B.C.D IP address dhcp IP Address negotiated via DHCP negotiated IP Address negotiated over PPP pool IP Address autoconfigured from a local DHCP pool slarp Set IP address through SLARP R3(config-if)#ip add     un R3(config-if)#ip unn R3(config-if)#ip unnumbered ? Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Null Null interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-Template Virtual Template interface Virtual-TokenRing Virtual TokenRing R3(config-if)#ip unnumbered ser 1/0 R3(config-if)#ppp authe cha R3(config-if)#do deb ppp authen PPP authentication debugging is on R3(config-if)#^Z R3#sh i *Mar 1 06:58:05.753: %SYS-5-CONFIG_I: Configured from console by console R3#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 17.80.1.1 YES manual up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 208.28.1.2 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.3 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--  Serial1/6 unassigned YES unset administratively down down Serial1/7 unassigned YES unset administratively down down Virtual-Access1 208.28.1.2 YES TFTP up up Virtual-Template1 208.28.1.2 YES TFTP down down Virtual-Access2 unassigned YES unset down down R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int virtual  -temp 1 R3(config-if)#shut % Shutdown not allowed on virtual template interface. R3(config-if)# [Special telnet escape help] ^^B sends telnet BREAK ^^C sends telnet IP ^^H sends telnet EC ^^O sends telnet AO ^^T sends telnet AYT ^^U sends telnet EL  R3(config-if)# R3(config-if)# R3(config-if)# R3(config-if)#int s 1/0 R3(config-if)#shut R3(config-if)# *Mar 1 06:58:35.806: %LINK-5-CHANGED: Interface Serial1/0, changed state to administratively down R3(config-if)#no *Mar 1 06:58:35.810: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down R3(config-if)#no shut *Mar 1 06:58:36.808: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to down *Mar 1 06:58:36.812: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to down R3(config-if)#no shut R3(config-if)# *Mar 1 06:58:40.438: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up *Mar 1 06:58:40.442: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up *Mar 1 06:58:40.442: Vi1 PPP: Using default call direction *Mar 1 06:58:40.442: Vi1 PPP: Treating connection as a dedicated line *Mar 1 06:58:40.442: Vi1 PPP: Session handle[BC00002D] Session id[43] *Mar 1 06:58:40.442: Vi1 PPP: Authorization required R3(config-if)# *Mar 1 06:58:40.458: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down R3(config-if)# *Mar 1 06:58:41.440: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up R3(config-if)#no shutshut int s 1/0shut int virtual-temp 1do deb ppp authen  *Mar 1 06:59:00.455: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up *Mar 1 06:59:00.455: Vi1 PPP: Using default call direction *Mar 1 06:59:00.455: Vi1 PPP: Treating connection as a dedicated line *Mar 1 06:59:00.455: Vi1 PPP: Session handle[7A00002E] Session id[44] *Mar 1 06:59:00.455: Vi1 PPP: Authorization required *Mar 1 06:59:00.479: Vi1 CHAP: O CHALLENGE id 2 len 23 from "R3" *Mar 1 06:59:00.491: Vi1 CHAP: I CHALLENGE id 3 len 23 from "R1" *Mar 1 06:59:00.495: Vi1 CHAP: Using hostname from unknown source *Mar 1 06:59:00.495: Vi1 CHAP: Using password from AAA *Mar 1 06:59:00.495: Vi1 CHAP: O RESPONSE id 3 len 23 from "R3" *Mar 1 06:59:00.503: Vi1 CHAP: I RESPONSE id 2 len 23 from "R1" R3(config-if)#do deb ppp authen *Mar 1 06:59:00.503: Vi1 PPP: Sent CHAP LOGIN Request *Mar 1 06:59:00.503: Vi1 PPP: Received LOGIN Response PASS *Mar 1 06:59:00.507: Vi1 PPP: Sent LCP AUTHOR Request *Mar 1 06:59:00.507: Vi1 PPP: Sent IPCP AUTHOR Request *Mar 1 06:59:00.507: Vi1 LCP: Received AAA AUTHOR Response PASS *Mar 1 06:59:00.507: Vi1 IPCP: Received AAA AUTHOR Response PASS *Mar 1 06:59:00.511: Vi1 CHAP: O SUCCESS id 2 len 4 *Mar 1 06:59:00.519: Vi1 CHAP: I SUCCESS id 3 len 4 *Mar 1 06:59:00.523: Vi1 PPP: Sent IPCP AUTHOR Request R3(config-if)#do deb ppp authenint virtual-temp 1 *Mar 1 06:59:01.521: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to up R3(config-if)#int virtual-temp 1shut int s 1/0shut no shut ^Z R3#p *Mar 1 06:59:29.126: %SYS-5-CONFIG_I: Configured from console by console R3#ping 208.29.  8.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 60/62/72 ms R3#ping 208.28.1.1 3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/57/60 ms R3#ping 208.28.1.3 2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 112/116/124 ms R3# RACK9AS>1 [Resuming connection 1 to r1 ... ] *Ma R1(config-if)# R1(config-if)#^Z R1#sdh     *Mar 1 07:02:08.443: %SYS-5-CONFIG_I: Configured from console by console R1#sh run | b user username R3 password 0 PinkCadillac ! ! ! ! interface Ethernet0/0 ip address 208.28.1.66 255.255.255.240 half-duplex ! interface Serial0/0 no ip address encapsulation frame-relay no fair-queue ! interface Serial0/0.1 point-to-point frame-relay interface-dlci 103 ! interface Ethernet0/1 ip address 17.57.100.1 255.255.255.0 half-duplex ! interface Serial0/1 no ip address --More--   shutdown ! interface Virtual-Template1 ip address 208.28.1.1 255.255.255.248 ppp authentication chap ! ip http server ip classless ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 ! ! --More--   R1#x RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh run \   | b user username One password 0 For-The-Money username R1 password 0 PinkCadillac ! ! ! ! ! ! ! ! interface FastEthernet0/0 ip address 17.80.1.1 255.255.255.0 duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto --More--   speed auto ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay ip split-horizon no fair-queue frame-relay map ip 208.28.1.2 302 frame-relay map ip 208.28.1.3 302 frame-relay interface-dlci 301 ppp Virtual-Template1 no frame-relay inverse-arp ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 encapsulation ppp ppp authentication pap optional ppp pap sent-username Two password 0 For-The-Show ! interface Serial1/3 --More--   no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! interface Virtual-Template1 ip unnumbered Serial1/0 ppp authentication chap ! --More--   R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s 1/2 R3(config-if)#ppp ? accm Set initial Async Control Character Map accounting Set PPP network accounting method acfc Options for HDLC Address & Control Field Compression authentication Set PPP link authentication method authorization Set PPP network authorization method bridge Enable PPP bridge translation caller Caller option when no CLID is available chap Set CHAP authentication parameters direction Override default PPP direction dnis Authentication via DNIS before LCP eap Set EAP authentication parameters encrypt Enable PPP encryption ipcp Set IPCP negotiation options iphc Set IPCP Header Compression control options lcp PPP LCP configuration link Set miscellaneous link parameters loopback PPP loopback options max-bad-auth Allow multiple authentication failures max-configure Number of conf-reqs sent before assuming peer is unable to respond max-failure Number of conf-naks sent before assuming configuration is not converging --More--   max-terminate Number of term-reqs sent before assuming peer is unable to respond ms-chap Set MS-CHAP authentication parameters ms-chap-v2 Set MS-CHAP-V2 authentication parameters multilink Make interface multilink capable pap Set PAP authentication parameters pfc Options for Protocol Field Compression quality Set parameters related to Link Quality Monitoring (LQM) reliable-link Use LAPB with PPP to provide a reliable link timeout Set PPP timeout parameters R3(config-if)#ppp reliable-link ? R3(config-if)#ppp reliable-link R3(config-if)# *Mar 1 07:03:57.422: Se1/2 PPP: Authorization required *Mar 1 07:03:57.442: Se1/2 PAP: Using hostname from interface PAP *Mar 1 07:03:57.446: Se1/2 PAP: Using password from interface PAP *Mar 1 07:03:57.446: Se1/2 PAP: O AUTH-REQ id 4 len 21 from "Two" *Mar 1 07:03:57.446: Se1/2 PAP: I AUTH-REQ id 3 len 22 from "One" *Mar 1 07:03:57.450: Se1/2 PAP: Authenticating peer One *Mar 1 07:03:57.450: Se1/2 PPP: Sent PAP LOGIN Request *Mar 1 07:03:57.450: Se1/2 PPP: Received LOGIN Response PASS *Mar 1 07:03:57.450: Se1/2 PPP: Sent LCP AUTHOR Request *Mar 1 07:03:57.454: Se1/2 PPP: Sent IPCP AUTHOR Request *Mar 1 07:03:57.454: Se1/2 LCP: Received AAA AUTHOR Response PASS R3(config-if)# *Mar 1 07:03:57.454: Se1/2 IPCP: Received AAA AUTHOR Response PASS *Mar 1 07:03:57.454: Se1/2 PAP: O AUTH-ACK id 3 len 5 *Mar 1 07:03:57.462: Se1/2 PAP: I AUTH-ACK id 4 len 5 *Mar 1 07:03:57.462: Se1/2 PPP: Sent CDPCP AUTHOR Request *Mar 1 07:03:57.466: Se1/2 PPP: Sent IPCP AUTHOR Request *Mar 1 07:03:57.466: Se1/2 CDPCP: Received AAA AUTHOR Response PASS R3(config-if)# RACK9AS>3 2 [Resuming connection 2 to r2 ... ] *Ma R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#itn s 1/2 ^ % Invalid input detected at '^' marker. R2(config)#int s 1/2 R2(config-if)#ppp re R2(config-if)#ppp reliable-link l  R2(config-if)# *Mar 1 07:04:20.684: Se1/2 PPP: Authorization required *Mar 1 07:04:20.708: Se1/2 PAP: Using hostname from interface PAP *Mar 1 07:04:20.708: Se1/2 PAP: Using password from interface PAP *Mar 1 07:04:20.708: Se1/2 PAP: O AUTH-REQ id 4 len 22 from "One" *Mar 1 07:04:20.716: Se1/2 PAP: I AUTH-REQ id 5 len 21 from "Two" *Mar 1 07:04:20.716: Se1/2 PAP: Authenticating peer Two *Mar 1 07:04:20.720: Se1/2 PPP: Sent PAP LOGIN Request *Mar 1 07:04:20.720: Se1/2 PPP: Received LOGIN Response PASS *Mar 1 07:04:20.720: Se1/2 PPP: Sent LCP AUTHOR Request *Mar 1 07:04:20.724: Se1/2 PPP: Sent IPCP AUTHOR Request *Mar 1 07:04:20.724: Se1/2 LCP: Received AAA AUTHOR Response PASS R2(config-if)#^Z R2# *Mar 1 07:04:20.724: Se1/2 IPCP: Received AAA AUTHOR Response PASS *Mar 1 07:04:20.724: Se1/2 PAP: O AUTH-ACK id 5 len 5 R2# *Mar 1 07:04:22.126: %SYS-5-CONFIG_I: Configured from console by console R2#u all All possible debugging has been turned off R2#shrun      run int s 1/2 Building configuration... Current configuration : 207 bytes ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 encapsulation ppp clock rate 64000 ppp reliable-link ppp authentication pap optional ppp pap sent-username One password 0 For-The-Money end R2# R2# RACK9AS>c 3 [Resuming connection 3 to r3 ... ] *Mar 1 07:04:1 R3(config-if)#^Z R3#u all All possible debugging has been turned off R3# *Mar 1 07:04:39.246: %SYS-5-CONFIG_I: Configured from console by console R3#u all All possible debugging has been turned off R3#sh run int  s 1/2 Building configuration... Current configuration : 188 bytes ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 encapsulation ppp ppp reliable-link ppp authentication pap optional ppp pap sent-username Two password 0 For-The-Show end R3# R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#sh i run int at,   m10 /0 Building configuration... Current configuration : 72 bytes ! interface ATM1/0 no ip address shutdown no atm ilmi-keepalive end R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int atm 1/0 R4(config-if)#ip addres 192.10.32.9 255.255.255.0 R4(config-if)#pvc 0/72 R4(config-if-atm-vc)#po ro R4(config-if-atm-vc)#protocol ip 192.10.32.254 R4(config-if-atm-vc)#protocol ip 192.10.32.254 br R4(config-if-atm-vc)#protocol ip 192.10.32.254 broadcast R4(config-if-atm-vc)#exit R4(config-if)#no shut R4(config-if)# *Mar 1 07:16:10.042: %LINK-3-UPDOWN: Interface ATM1/0, changed state to up *Mar 1 07:16:11.042: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM1/0, changed state to up R4(config-if)#do pin 192.10.32.254 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.10.32.254, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms R4(config-if)# R4(config-if)# R4(config-if)#exit R4(config)#access-list 1 per any R4(config)#ip nat sou R4(config)#ip nat sou     int R4(config)#ip nat int  R4(config)#ip nat inside sou list 1 ? interface Specify interface for global address pool Name pool of global addresses R4(config)#ip nat inside sou list 1 int atm 1/0 ? overload Overload an address translation vrf Specify vrf R4(config)#ip nat inside sou list 1 int atm 1/0 ou v R4(config)#ip nat inside sou list 1 int atm 1/0 overload R4(config)#int fa 0/09 ^ % Invalid input detected at '^' marker. R4(config)#int fa 0/09  R4(config-if)#ip nat in R4(config-if)#iu nt atm 1/0 R4(config-if)#ip nat out R4(config-if)#^Z R4# RACK9AS>3 3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip route 0.0.0.0 0.0.0.0 fa 0/0 R3(config)#^Z R3# ping *Mar 1 07:19:22.570: %SYS-5-CONFIG_I: Configured from console by console R3# ping 192.1.32.2540.32.254 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.10.32.254, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 1/3/4 ms R3# R3# R3# R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] *Mar R4#sh ip nat tran Pro Inside global Inside local Outside local Outside global icmp 192.10.32.9:9 17.80.1.1:9 192.10.32.254:9 192.10.32.254:9 R4# R4# R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#no ip route 0.0.0.0 0.0.0.0 fa 0/0nip route 0.0.0.0 0.0.0.0 fa 0/0oip route 0.0.0.0 0.0.0.0 fa 0/0 ip route 0.0.0.0 0.0.0.0 fa 0/0 R3(config)#^Z R3# *Mar 1 07:19:56.133: %SYS-5-CONFIG_I: Configured from console by console R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#ip nat ? Stateful Stateful NAT configuration commands inside Inside address translation log NAT Logging outside Outside address translation pool Define pool of addresses service Special translation for application using non-standard port translation NAT translation entry configuration R4(config)#ip nat in ? destination Destination address translation source Source address translation R4(config)#ip nat in s dest ? list Specify access list describing global addresses R4(config)#ip nat in dest li ? <1-2699> Access list number for global addresses WORD Access list name for global addresses R4(config)#ip nat in dest li                   access-list 2 per 17.57.1.     80.1.3 R4(config)#ip nat in des 17.80.1.3 ? % Unrecognized command R4(config)#ip nat in des 17.80.1.3 access-list 2 per 17.80.1.3    ip nat out access-list 2 per 17.80.1.3     ip nat out nt atm 1/0p nat out access-list 2 per 17.80.1.3 ip nat in des 17.80.1.3 s l17.80.1.3 i17.80.1.3 s17.80.1.3 t17.80.1.3  17.80.1.3 217.80.1.3 17.80.1.3          ? pool Name pool of local addresses R4(config)#ip nat in des list 2                       no o access 2 R4(config)#ip nat ? Stateful Stateful NAT configuration commands inside Inside address translation log NAT Logging outside Outside address translation pool Define pool of addresses service Special translation for application using non-standard port translation NAT translation entry configuration R4(config)#ip nat out ? source Source address translation R4(config)#ip nat out sou         ? Stateful Stateful NAT configuration commands inside Inside address translation log NAT Logging outside Outside address translation pool Define pool of addresses service Special translation for application using non-standard port translation NAT translation entry configuration R4(config)#ip nat tra ? dns-timeout Specify timeout for NAT DNS flows finrst-timeout Specify timeout for NAT TCP flows after a FIN or RST icmp-timeout Specify timeout for NAT ICMP flows max-entries Specify maximum number of NAT entries port-timeout Specify timeout for NAT TCP/UDP port specific flows pptp-timeout Specify timeout for NAT PPTP flows syn-timeout Specify timeout for NAT TCP flows after a SYN and no further data tcp-timeout Specify timeout for NAT TCP flows timeout Specify timeout for dynamic NAT translations udp-timeout Specify timeout for NAT UDP flows R4(config)#ip nat tra       ? Stateful Stateful NAT configuration commands inside Inside address translation log NAT Logging outside Outside address translation pool Define pool of addresses service Special translation for application using non-standard port translation NAT translation entry configuration R4(config)#ip nat in ? destination Destination address translation source Source address translation R4(config)#ip nat in           ip nat out ? source Source address translation R4(config)#ip nat out sou ? list Specify access list describing global addresses route-map Specify route-map static Specify static global->local mapping R4(config)#ip nat out sou st ? A.B.C.D Outside global IP address network Subnet translation tcp Transmission Control Protocol udp User Datagram Protocol R4(config)#ip nat out sou st   1923 .10.32.254 ? A.B.C.D Outside local IP address R4(config)#ip nat out sou st 192.10.32.254 17.80.1.3 ? add-route Add a static route for outside local address extendable Extend this translation when used no-alias Do not create an alias for the local address no-payload No translation of embedded address/port in the payload redundancy NAT redundancy operation vrf Specify vrf R4(config)#ip nat out sou st 192.10.32.254 17.80.1.3 R4(config)#do sh ip nat tra Pro Inside global Inside local Outside local Outside global tcp 192.10.32.9:2 192.10.32.9:179 192.10.32.254:14246 192.10.32.254:14246 --- --- --- 17.80.1.3 192.10.32.254 R4(config)# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#ping 17.80.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.3, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 1/3/4 ms R3# R3# R3#ping 17.80.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4(config)#en % Ambiguous command: "en" R4(config)#d exit R4#sh *Mar 1 07:26:20.070: %SYS-5-CONFIG_I: Configured from console by console R4#sh ip nat tra Pro Inside global Inside local Outside local Outside global tcp 192.10.32.9:3 192.10.32.9:179 192.10.32.254:14246 192.10.32.254:14246 --- --- --- 17.80.1.3 192.10.32.254 R4# R4# R4# R4# R4#deb ip nat tra R4#deb ip nat tran R4#deb ip nat tran    ? <1-99> Access list detailed NAT detailed events h323 NAT H.323 events ipsec NAT IPSec events port NAT PORT events pptp NAT PPTP events route NAT Static route events sip NAT SIP events skinny NAT skinny events vrf NAT VRF events R4#deb ip nat IP NAT debugging is on R4#deb ip nat  sh ip nat tradeb ip nat  det IP NAT detailed debugging is on R4#^x3 % Unknown command or computer name, or unable to find computer address R4# R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#ping 17.80.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#sh log Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 16 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: disabled, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 21 message lines logged R4# config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)# R4(config)#log buff R4(config)#^Z R4# *Mar 1 07:27:05.758: %SYS-5-CONFIG_I: Configured from console by console R4# *Mar 1 07:27:22.638: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 3 (179) R4#ping *Mar 1 07:27:26.638: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 4 *Mar 1 07:27:26.638: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [34] *Mar 1 07:27:26.638: NAT: TCP s=179->4, d=14246 R4#ping 192.10.32.254 soun    17.80.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.10.32.254, timeout is 2 seconds: Packet sent with a source address of 17.80.1.2 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/7/8 ms R4# *Mar 1 07:27:39.534: NAT: Allocated Port for 17.80.1.2 -> 192.10.32.9: wanted 1 got 1 *Mar 1 07:27:39.534: NAT: i: icmp (17.80.1.2, 1) -> (192.10.32.254, 1) [5] *Mar 1 07:27:39.538: NAT: s=17.80.1.2->192.10.32.9, d=192.10.32.254 [5] *Mar 1 07:27:39.538: NAT*: o: icmp (192.10.32.254, 1) -> (192.10.32.9, 1) [5] *Mar 1 07:27:39.538: NAT*: s=192.10.32.254, d=192.10.32.9->17.80.1.2 [5] *Mar 1 07:27:39.542: NAT: i: icmp (17.80.1.2, 1) -> (192.10.32.254, 1) [6] *Mar 1 07:27:39.542: NAT: s=17.80.1.2->192.10.32.9, d=192.10.32.254 [6] *Mar 1 07:27:39.546: NAT*: o: icmp (192.10.32.254, 1) -> (192.10.32.9, 1) [6] *Mar 1 07:27:39.546: NAT*: s=192.10.32.254, d=192.10.32.9->17.80.1.2 [6] *Mar 1 07:27:39.550: NAT: i: icmp (17.80.1.2, 1) -> (192.10.32.254, 1) [7] *Mar 1 07:27:39.550: NAT: s=17.80.1.2->192.10.32.9, d=192.10.32.254 [7] *Mar 1 07:27:39.554: NAT*: o: icmp (192.10.32.254, 1) -> (192.10.32.9, 1) [7] *Mar 1 07:27:39.554: NAT*: s=192.10.32.254, d=192.10.32.9->17.80.1.2 [7] *Mar 1 07:27:39.558: NAT: i: icmp (17.80.1.2, 1) -> (192.10.32.254, 1) [8] *Mar 1 07:27:39.558: NAT: s=17.80.1.2->192.10.32.9, d=192.10.32.254 [8] *Mar 1 07:27:39.558: NAT*: o: icmp (192.10.32.254, 1) -> (192.10.32.9, 1) [8] *Mar 1 07:27:39.562: NAT*: s=192.10.32.254, d=192.10.32.9->17.80.1.2 [8] *Mar 1 07:27:39.562: NAT: i: icmp (17.80.1.2, 1) -> (192.10.32.254, 1) [9] *Mar 1 07:27:39.566: NAT: s=17.80.1.2->192.10.32.9, d=192.10.32.254 [9] *Mar 1 07:27:39.566: NAT*: o: icmp (192.10.32.254, 1) -> (192.10.32.9, 1) [9] *Mar 1 07:27:39.566: NAT*: s=192.10.32.254, d=192.10.32.9->17.80.1.2 [9] R4# R4# R4# R4# R4#clea ip    logg Clear logging buffer [confirm] R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#ping 17.80.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#sh log Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 43 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 27 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 22 message lines logged --More--   Log Buffer (4096 bytes): R4#deb ip icmp ICMP packet debugging is on R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] ping 17.80.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] *Mar 1 07:28:08.290: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 *Mar 1 07:28:08.294: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 *Mar 1 07:28:08.298: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 *Mar 1 07:28:08.302: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 *Mar 1 07:28:08.306: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 R4# R4# *Mar 1 07:28:26.638: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 4 (179) R4# *Mar 1 07:28:30.638: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 5 *Mar 1 07:28:30.638: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [50] *Mar 1 07:28:30.638: NAT: TCP s=179->5, d=14246 R4# *Mar 1 07:28:39.566: NAT: expiring 192.10.32.9 (17.80.1.2) icmp 1 (1) R4# *Mar 1 07:29:30.638: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 5 (179) R4# *Mar 1 07:29:34.638: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 6 *Mar 1 07:29:34.638: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [51] *Mar 1 07:29:34.642: NAT: TCP s=179->6, d=14246 R4# *Mar 1 07:30:34.642: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 6 (179) R4# *Mar 1 07:30:38.642: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 1 *Mar 1 07:30:38.642: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [52] *Mar 1 07:30:38.642: NAT: TCP s=179->1, d=14246 R4#sh ip nat tran Pro Inside global Inside local Outside local Outside global tcp 192.10.32.9:1 192.10.32.9:179 192.10.32.254:14246 192.10.32.254:14246 --- --- --- 17.80.1.3 192.10.32.254 R4# *Mar 1 07:31:38.658: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 1 (179) R4# *Mar 1 07:31:42.642: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 2 *Mar 1 07:31:42.642: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [53] *Mar 1 07:31:42.642: NAT: TCP s=179->2, d=14246 R4# *Mar 1 07:32:42.642: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 2 (179) R4# *Mar 1 07:32:46.642: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 3 *Mar 1 07:32:46.642: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [54] *Mar 1 07:32:46.642: NAT: TCP s=179->3, d=14246 R4# *Mar 1 07:33:46.642: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 3 (179) R4#u al *Mar 1 07:33:50.642: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 4 *Mar 1 07:33:50.646: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [55] *Mar 1 07:33:50.646: NAT: TCP s=179->4, d=14246 R4#u all All possible debugging has been turned off R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#no ip cef R4(config)#int s   atm 1/0 R4(config-if)#no ip route R4(config-if)#no ip route-cache R4(config-if)#int fa 0/0 R4(config-if)#no ip route R4(config-if)#do sh ip int fa 0/0 FastEthernet0/0 is up, line protocol is up Internet address is 17.80.1.2/24 Broadcast address is 255.255.255.255 Address determined by setup command MTU is 1500 bytes Helper address is not set Directed broadcast forwarding is disabled Outgoing access list is not set Inbound access list is not set Proxy ARP is enabled Local Proxy ARP is disabled Security level is default Split horizon is enabled ICMP redirects are always sent ICMP unreachables are always sent ICMP mask replies are never sent IP fast switching is disabled IP fast switching on the same interface is disabled IP Flow switching is disabled IP CEF switching is disabled IP Feature Fast switching turbo vector IP multicast fast switching is disabled IP multicast distributed fast switching is disabled --More--   R4(config-if)#no ip pro R4(config-if)#no ip proxy-arp R4(config-if)# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#clea i arp R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4(config-if)#do clea arp R4(config-if)# RACK9AS>34 % 34 is not an open connection RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#clea arpping 17.80.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4(config-if)#do sh log Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 80 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 64 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 22 message lines logged --More--   Log Buffer (4096 bytes): *Mar 1 07:28:08.290: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 *Mar 1 07:28:08.294: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 *Mar 1 07:28:08.298: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 *Mar 1 07:28:08.302: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 *Mar 1 07:28:08.306: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 *Mar 1 07:28:26.638: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 4 (179) *Mar 1 07:28:30.638: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 5 *Mar 1 07:28:30.638: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [50] *Mar 1 07:28:30.638: NAT: TCP s=179->5, d=14246 *Mar 1 07:28:39.566: NAT: expiring 192.10.32.9 (17.80.1.2) icmp 1 (1) *Mar 1 07:29:30.638: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 5 (179) *Mar 1 07:29:34.638: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 6 *Mar 1 07:29:34.638: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [51] *Mar 1 07:29:34.642: NAT: TCP s=179->6, d=14246 *Mar 1 07:30:34.642: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 6 (179) *Mar 1 07:30:38.642: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 1 --More--  *Mar 1 07:30:38.642: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [52] *Mar 1 07:30:38.642: NAT: TCP s=179->1, d=14246 *Mar 1 07:31:38.658: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 1 (179) *Mar 1 07:31:42.642: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 2 *Mar 1 07:31:42.642: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [53] *Mar 1 07:31:42.642: NAT: TCP s=179->2, d=14246 *Mar 1 07:32:42.642: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 2 (179) *Mar 1 07:32:46.642: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 3 *Mar 1 07:32:46.642: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [54] *Mar 1 07:32:46.642: NAT: TCP s=179->3, d=14246 *Mar 1 07:33:46.642: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 3 (179) *Mar 1 07:33:50.642: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 4 *Mar 1 07:33:50.646: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [55] *Mar 1 07:33:50.646: NAT: TCP s=179->4, d=14246 R4(config-if)#           do deb ip nat IP NAT debugging is on R4(config-if)# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#ping 17.80.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/4 ms R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4(config-if)#do deb ip nat IP NAT debugging is on R4(config-if)#do deb ip natsh log  Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 80 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 64 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 22 message lines logged --More--   Log Buffer (4096 bytes): *Mar 1 07:28:08.290: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 *Mar 1 07:28:08.294: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 *Mar 1 07:28:08.298: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 *Mar 1 07:28:08.302: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 *Mar 1 07:28:08.306: ICMP: echo reply sent, src 17.80.1.3, dst 17.80.1.1 *Mar 1 07:28:26.638: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 4 (179) *Mar 1 07:28:30.638: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 5 *Mar 1 07:28:30.638: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [50] *Mar 1 07:28:30.638: NAT: TCP s=179->5, d=14246 *Mar 1 07:28:39.566: NAT: expiring 192.10.32.9 (17.80.1.2) icmp 1 (1) *Mar 1 07:29:30.638: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 5 (179) *Mar 1 07:29:34.638: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 6 *Mar 1 07:29:34.638: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [51] *Mar 1 07:29:34.642: NAT: TCP s=179->6, d=14246 *Mar 1 07:30:34.642: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 6 (179) *Mar 1 07:30:38.642: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 1 --More--  *Mar 1 07:30:38.642: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [52] *Mar 1 07:30:38.642: NAT: TCP s=179->1, d=14246 *Mar 1 07:31:38.658: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 1 (179) *Mar 1 07:31:42.642: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 2 *Mar 1 07:31:42.642: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [53] *Mar 1 07:31:42.642: NAT: TCP s=179->2, d=14246 *Mar 1 07:32:42.642: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 2 (179) *Mar 1 07:32:46.642: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 3 *Mar 1 07:32:46.642: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [54] *Mar 1 07:32:46.642: NAT: TCP s=179->3, d=14246 *Mar 1 07:33:46.642: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 3 (179) *Mar 1 07:33:50.642: NAT: Allocated Port for 192.10.32.9 -> 192.10.32.9: wanted 179 got 4 *Mar 1 07:33:50.646: NAT: i: tcp (192.10.32.9, 179) -> (192.10.32.254, 14246) [55] *Mar 1 07:33:50.646: NAT: TCP s=179->4, d=14246 R4(config-if)#       ip cef R4(config)#int fa 0/09 ^ % Invalid input detected at '^' marker. R4(config)#int fa 0/09  R4(config-if)#ip route R4(config-if)#ip route-cache R4(config-if)#int atm 1/.0  0 R4(config-if)#int atm 1/0p route-cache R4(config-if)#exit R4(config)#ip nat ? Stateful Stateful NAT configuration commands inside Inside address translation log NAT Logging outside Outside address translation pool Define pool of addresses service Special translation for application using non-standard port translation NAT translation entry configuration R4(config)#ip nat        access-list 2 per 17 *Mar 1 07:35:54.646: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 5 (179) R4(config)#access-list 2 per 17.80.1.3 R4(config)# *Mar 1 07:35:58.646: NAT: TCP s=179->6, d=14246 R4(config)#do u all All possible debugging has been turned off R4(config)#iip a    p nat ? Stateful Stateful NAT configuration commands inside Inside address translation log NAT Logging outside Outside address translation pool Define pool of addresses service Special translation for application using non-standard port translation NAT translation entry configuration R4(config)#ip nat des R4(config)#ip nat des     int s des ? % Unrecognized command R4(config)#ip nat int des      R4(config)#ip nat int   R4(config)#ip nat int  R4(config)#ip nat inside des ? list Specify access list describing global addresses R4(config)#ip nat inside des            pool ? WORD Pool name R4(config)#ip nat pool test ? A.B.C.D Start IP address netmask Specify the network mask prefix-length Specify the prefix length R4(config)#ip nat pool test 192.10.32.9 do u all ip nat pool test 192.10.32.9 1 ? A.B.C.D End IP address R4(config)#ip nat pool test 192.10.32.9 192.10.32.9 ? netmask Specify the network mask prefix-length Specify the prefix length R4(config)#ip nat pool test 192.10.32.9 192.10.32.9 pr R4(config)#ip nat pool test 192.10.32.9 192.10.32.9 prefix-length 24 R4(config)#ip nat in des ? list Specify access list describing global addresses R4(config)#ip nat in des list 2 ? pool Name pool of local addresses R4(config)#ip nat in des list 2 pool test ? R4(config)#ip nat in des list 2 pool test % Pool test is not a rotary-type pool, unexpected behavior may result. R4(config)#do    do sh run | i ip nat ip nat inside ip nat outside ip nat pool test 192.10.32.9 192.10.32.9 prefix-length 24 ip nat inside source list 1 interface ATM1/0 overload ip nat inside destination list 2 pool test ip nat outside source static 192.10.32.254 17.80.1.3 R4(config)#no ip nat outside source static 192.10.32.254 17.80.1.3 R4(config)# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#ping 17.80.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.3, timeout is 2 seconds: ... RACK9AS>4 [Resuming connection 4 to r4 ... ] R4(config)#do deb ip nat IP NAT debugging is on R4(config)# RACK9AS>3 [Resuming connection 3 to r3 ... ] ..ping 17.80.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.3, timeout is 2 seconds: RACK9AS>4 [Resuming connection 4 to r4 ... ] R4(config)# *Mar 1 07:38:02.646: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 1 (179) R4(config)# *Mar 1 07:38:06.646: NAT: TCP s=179->2, d=14246 R4(config)#access-list 100 per ip asn  ny host                                 int fa 0/0 R4(config-if)#ip pro R4(config-if)#ip proxy-arp R4(config-if)# RACK9AS>3 [Resuming connection 3 to r3 ... ] ..ping 17.80.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.3, timeout is 2 seconds: RACK9AS>4 [Resuming connection 4 to r4 ... ] *Ma R4(config-if)# *Mar 1 07:39:10.650: NAT: TCP s=179->3, d=14246 R4(config-if)#acc e     exitr ^ % Invalid input detected at '^' marker. R4(config-if)#exit R4(config)#access-list 100 per ip any 17.80.1.3 % Incomplete command. R4(config)#access-list 100 per ip any 17.80.1.31h17.80.1.3o17.80.1.3s17.80.1.3t17.80.1.3 17.80.1.3 R4(config)#access-list 100 per ip any host 17.80.1.317.80.1.3 exit rip proxy-arp nt fa 0/0 do deb ip natno ip nat outside source static 192.10.32.254 17.80.1.3do sh run | i ip nat ip nat in des list 2 pool test  pool test pool test  pool test 1 pool test 0 pool test 0 pool test  % Pool test is not a rotary-type pool, unexpected behavior may result. R4(config)# *Mar 1 07:39:49.838: ipnat_add_dynamic RACK9AS>3 [Resuming connection 3 to r3 ... ] .. R3#ping 17.80.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.3, timeout is 2 seconds: . RACK9AS>4 [Resuming connection 4 to r4 ... ] mon: id 3, flag 5, range 1 *Mar 1 07:39:49.838: id 3, flags 0, domain 0, lookup 1, aclnum 64, aclname 100, mapname idb 0x00000000 *Mar 1 07:39:49.838: poolstart 192.10.32.9 poolend 192.10.32.9 R4(config)# R4(config)#do sh ip nat tra Pro Inside global Inside local Outside local Outside global tcp 192.10.32.9:3 192.10.32.9:179 192.10.32.254:14246 192.10.32.254:14246 R4(config)# *Mar 1 07:40:10.650: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 3 (179) R4(config)# *Mar 1 07:40:14.650: NAT: TCP s=179->4, d=14246 R4(config)#do sh ip nat traip nat in des list 100 pool test access-list 100 per ip any host 17.80.1.3ip nat in des list 100 pool test access-list 100 per ip any host 17.80.1.3naccess-list 100 per ip any host 17.80.1.3oaccess-list 100 per ip any host 17.80.1.3 access-list 100 per ip any host 17.80.1.3 R4(config)#no access-list 100 per ip any host 17.80.1.3do sh ip nat tra ip nat in des list 100 pool test nip nat in des list 100 pool test oip nat in des list 100 pool test  ip nat in des list 100 pool test  R4(config)#no ip nat in des list 100 pool test access-list 100 per ip any host 17.80.1.3do sh ip nat tra ip nat in des list 100 pool test access-list 100 per ip any host 17.80.1.317.80.1.3 exit rip proxy-arp nt fa 0/0 do deb ip natno ip nat outside source static 192.10.32.254 17.80.1.3no ip nat outside source static 192.10.32.254 17.80.1.3  ip nat outside source static 192.10.32.254 17.80.1.3 a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1.3a ip nat outside source static 192.10.32.254 17.80.1$a ip nat outside source static 192.10.32.254 17.80.a ip nat outside source static 192.10.32.254 17.80a ip nat outside source static 192.10.32.254 17.8a ip nat outside source static 192.10.32.254 17.a ip nat outside source static 192.10.32.254 17a ip nat outside source static 192.10.32.254 1a ip nat outside source static 192.10.32.254 a ip nat outside source static 192.10.32.254a ip nat outside source static 192.10.32.25a ip nat outside source static 192.10.32.2a ip nat outside source static 192.10.32.a ip nat outside source static 192.10.32a ip nat outside source static 192.10.3a ip nat outside source static 192.10.a ip nat outside source static 192.10a ip nat outside source static 192.1a ip nat outside source static 192.a ip nat outside source static 192a ip nat outside source static 19 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa ip nat outside source static 192.10.32.254 1 ^7.80.1.3 % Invalid input detected at '^' marker. R4(config)#\ \= ^ % Invalid input detected at '^' marker. R4(config)#\=$aaaa ip nat outside source static 192.10.32.254 17.80.1.3ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 aaaaaaaaaip nat outside source static 192.10.32.254 17.80.1.3ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 aaaaaaaaaip nat outside source static 192.10.32.254 17.80.1.3ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 aaaaaaaaaaip nat outside source static 192.10.32.254 17.80.1.3ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3 ip nat outside source static 192.10.32.254 17.80.1.3  R4(config)# *Mar 1 07:41:00.414: ipnat_add_static_cfg: id 1, flag 6 *Mar 1 07:41:00.414: id 1, flags 0, domain 1, lookup 1, from_addr C00A20FE, from_mask FFFFFFFF, from_port 0, to_addr 11500103, to_port 0 to_mask FFFFFFFF, proto 0 R4(config)#do    do wr Building configuration... *Mar 1 07:41:14.650: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 4 (179)[OK] R4(config)#do sh run | i ip nat ip nat inside ip nat outside ip nat pool test 192.10.32.9 192.10.32.9 prefix-length 24 ip nat inside source list 1 interface ATM1/0 overload ip nat inside destination list 2 pool test ip nat outside source static 192.10.32.254 17.80.1.3 R4(config)# *Mar 1 07:41:18.650: NAT: TCP s=179->5, d=14246 R4(config)#no ip nat inside destination list 2 pool test R4(config)# R4(config)#no access-list 2 R4(config)#^Z R4# *Mar 1 07:41:30.918: %SYS-5-CONFIG_I: Configured from console by console R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#no access-list 2ip nat inside destination list 2 pool testdo sh run | i ip nat wr ip nat outside source static 192.10.32.254 17.80.1.3 ? add-route Add a static route for outside local address extendable Extend this translation when used no-alias Do not create an alias for the local address no-payload No translation of embedded address/port in the payload redundancy NAT redundancy operation vrf Specify vrf R4(config)#ip nat outside source static 192.10.32.254 17.80.1.3 ex R4(config)#ip nat outside source static 192.10.32.254 17.80.1.3 extendable R4(config)#ip nat outside source static 192.10.32.254 17.80.1.3 extendable  extendable 2 extendable 5 extendable 4 extendable  R4(config)#ip nat outside source static 192.10.32.254 17.80.1.254 extendable  *Mar 1 07:42:02.122: ipnat_add_static_cfg: id 2, flag 6 *Mar 1 07:42:02.122: id 2, flags 0, domain 1, lookup 1, from_addr C00A20FE, from_mask FFFFFFFF, from_port 0, to_addr 115001FE, to_port 0 to_mask FFFFFFFF, proto 0 R4(config)#ip nat outside source static 192.10.32.254 17.80.1.254 extendable  extendable 2 extendable  R4(config)#ip nat outside source static 192.10.32.254 17.80.1.252 extendable  *Mar 1 07:42:08.122: ipnat_add_static_cfg: id 3, flag 6 *Mar 1 07:42:08.126: id 3, flags 0, domain 1, lookup 1, from_addr C00A20FE, from_mask FFFFFFFF, from_port 0, to_addr 115001FC, to_port 0 to_mask FFFFFFFF, proto 0 R4(config)#ip nat outside source static 192.10.32.254 17.80.1.252 extendable  extendable 0 extendable  R4(config)# *Mar 1 07:42:12.554: ipnat_add_static_cfg: id 4, flag 6 *Mar 1 07:42:12.558: id 4, flags 0, domain 1, lookup 1, from_addr C00A20FE, from_mask FFFFFFFF, from_port 0, to_addr 115001FA, to_port 0 to_mask FFFFFFFF, proto 0 R4(config)#^Z R4# *Mar 1 07:42:15.558: %SYS-5-CONFIG_I: Configured from console by console R4#sh ip nat *Mar 1 07:42:18.650: NAT: expiring 192.10.32.9 (192.10.32.9) tcp 5 (179) R4#sh ip nat tra Pro Inside global Inside local Outside local Outside global --- --- --- 17.80.1.250 192.10.32.254 --- --- --- 17.80.1.252 192.10.32.254 --- --- --- 17.80.1.254 192.10.32.254 --- --- --- 17.80.1.3 192.10.32.254 R4# *Mar 1 07:42:22.650: NAT: TCP s=179->6, d=14246 R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] .. R3#ping 17.80.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/4 ms R3#17.80.1.3 Trying 17.80.1.3 ... % Connection refused by remote host R3#17.80.1.3 250 Trying 17.80.1.250 ... % Connection refused by remote host R3#17.80.1.250 2 Trying 17.80.1.252 ... % Connection refused by remote host R3#17.80.1.252 4 Trying 17.80.1.254 ... % Connection refused by remote host R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int     line vty 0 4 R4(config-line)#no login R4(config-line)#privi 15 ^ % Invalid input detected at '^' marker. R4(config-line)#privi 15  level 16 5 R4(config-line)#^Z R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#17.80.1.254 Trying 17.80.1.254 ... % Connection refused by remote host R3#17.80.1.254 Trying 17.80.1.254 ... % Connection refused by remote host R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] *Mar R4#sh run *Mar 1 07:43:26.654: NAT: TCP s=179->1, d=14246 R4#sh run line Building configuration... Current configuration : 1168 bytes 1 : ! 2 : version 12.3 3 : service timestamps debug datetime msec 4 : service timestamps log datetime msec 5 : no service password-encryption 6 : ! 7 : hostname R4 8 : ! 9 : boot-start-marker 10 : boot-end-marker 11 : ! 12 : logging buffered 4096 debugging 13 : ! 14 : no aaa new-model 15 : ip subnet-zero 16 : ! 17 : ! 18 : ip cef 19 : no ip domain lookup 20 : ! 21 : ip audit po max-events 100 --More--   R4#sh run line    | b lin line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! ! end R4#192.10.32.254 Trying 192.10.32.254 ... Open CR1> *Mar 1 07:43:46.994: NAT: TCP s=11407->1024, d=23 *Mar 1 07:43:46.998: NAT*: TCP s=23, d=1024->11407 *Mar 1 07:43:46.998: NAT: TCP s=11407->1024, d=23 *Mar 1 07:43:47.002: NAT*: TCP s=23, d=1024->11407 *Mar 1 07:43:47.006: NAT*: TCP s=23, d=1024->11407 *Mar 1 07:43:47.002: NAT: TCP s=11407->1024, d=23 *Mar 1 07:43:47.010: NAT*: TCP s=23, d=1024->11407 *Mar 1 07:43:47.010: NAT*: TCP s=23, d=1024->11407 *Mar 1 07:43:47.010: NAT*: TCP s=23, d=1024->11407 *Mar 1 07:43:47.014: NAT: TCP s=11407->1024, d=23 *Mar 1 07:43:47.018: NAT: TCP s=11407->1024, d=23 *Mar 1 07:43:47.018: NAT: TCP s=11407->1024, d=23 *Mar 1 07:43:47.022: NAT: TCP s=11407->1024, d=23 *Mar 1 07:43:47.022: NAT*: TCP s=23, d=1024->11407 *Mar 1 07:43:47.026: NAT: TCP s=11407->1024, d=23 *Mar 1 07:43:47.222: NAT*: TCP s=23, d=1024->11407 *Mar 1 07:43:47.230: NAT: TCP s=11407->1024, d=23q [Connection to 192.10.32.254 closed by foreign host] R4# *Mar 1 07:43:51.514: NAT: TCP s=11407->1024, d=23 *Mar 1 07:43:51.514: NAT*: TCP s=23, d=1024->11407 *Mar 1 07:43:51.638: NAT: TCP s=11407->1024, d=23 *Mar 1 07:43:51.638: NAT*: TCP s=23, d=1024->11407 *Mar 1 07:43:51.742: NAT*: TCP s=23, d=1024->11407 *Mar 1 07:43:51.746: NAT: TCP s=23, d=1024->11407 *Mar 1 07:43:51.746: NAT: TCP s=11407->1024, d=23 *Mar 1 07:43:51.754: NAT: TCP s=11407->1024, d=23 *Mar 1 07:43:51.758: NAT*: TCP s=23, d=1024->11407 R4#u all All possible debugging has been turned off R4#sh ip    run }  Building configuration... Current configuration : 1168 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R4 ! boot-start-marker boot-end-marker ! logging buffered 4096 debugging ! no aaa new-model ip subnet-zero ! ! ip cef no ip domain lookup ! ip audit po max-events 100 --More--   R4#  sh run | b interface interface FastEthernet0/0 ip address 17.80.1.2 255.255.255.0 ip nat inside duplex auto speed auto ! interface ATM1/0 ip address 192.10.32.9 255.255.255.0 ip nat outside no atm ilmi-keepalive pvc 0/72 protocol ip 192.10.32.254 broadcast ! ! ip nat pool test 192.10.32.9 192.10.32.9 prefix-length 24 ip nat inside source list 1 interface ATM1/0 overload ip nat outside source static 192.10.32.254 17.80.1.3 extendable ip nat outside source static 192.10.32.254 17.80.1.254 extendable ip nat outside source static 192.10.32.254 17.80.1.252 extendable ip nat outside source static 192.10.32.254 17.80.1.250 extendable ip http server no ip http secure-server ip classless --More--  ! ! access-list 1 permit any ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! ! end R4# R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip nat        do sh access-list R3(config)#access-list 1 per any R3(config)#\ ip nat ? Stateful Stateful NAT configuration commands inside Inside address translation log NAT Logging outside Outside address translation pool Define pool of addresses service Special translation for application using non-standard port translation NAT translation entry configuration R3(config)#ip nat out     out ? source Source address translation R3(config)#ip nat out sou 180.40.7.2 ? % Unrecognized command R3(config)#ip nat out sou 180.40.7.2 access-list 1 per any ip nat out sou 180.40.7.2            ? list Specify access list describing global addresses route-map Specify route-map static Specify static global->local mapping R3(config)#ip nat out sou sta ? A.B.C.D Outside global IP address network Subnet translation tcp Transmission Control Protocol udp User Datagram Protocol R3(config)#ip nat out sou sta 19 80.40.7.2 ? A.B.C.D Outside local IP address R3(config)#ip nat out sou sta 180.40.7.2 17.80.1.22 ? add-route Add a static route for outside local address extendable Extend this translation when used no-alias Do not create an alias for the local address no-payload No translation of embedded address/port in the payload redundancy NAT redundancy operation vrf Specify vrf R3(config)#ip nat out sou sta 180.40.7.2 17.80.1.22 R3(config)#int s 1/2 R3(config-if)#ip nat out R3(config-if)#int fa 0/0 R3(config-if)#ip nat in R3(config-if)#do sh ip nat tran Pro Inside global Inside local Outside local Outside global --- --- --- 17.80.1.22 180.40.7.2 R3(config-if)#^Z R3#d  *Mar 1 07:45:14.602: %SYS-5-CONFIG_I: Configured from console by console R3#deb ipi nat        nat tran ^ % Invalid input detected at '^' marker. R3#deb ip nat tran     IP NAT debugging is on R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#ping 180   17.80.1.22 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.22, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 4/4/4 ms R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh deb ip nat tran sh log Syslog logging: enabled (9 messages dropped, 2 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 158 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: disabled, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 80 message lines logged R3# config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#lk  log % Incomplete command. R3(config)#  log buff R3(config)#^Z R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#ping 17.80.1.22 rep 100000009  Type escape sequence to abort. Sending 10000000, 100-byte ICMP Echos to 17.80.1.22, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! RACK9AS>3 [Resuming connection 3 to r3 ... ] *Ma R3#deb ip icmp ICMP packet debugging is on R3# *Mar 1 07:46:09.985: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:09.993: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:09.997: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.001: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.005: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.009: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.017: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.021: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.025: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.029: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.033: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.041: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.045: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 0 R3#7:46:10.049: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.053: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.057: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.065: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.069: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.073: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.077: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.081: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.089: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.093: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.097: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.101: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.105: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.109: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.117: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.121: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.125: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.129: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.137: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.141: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.145: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.149: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.153: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.161: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.165: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.169: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.173: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.177: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.186: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.190: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.194: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.198: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.202: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.206: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.214: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.218: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.222: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.226: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.230: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.238: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.242: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.246: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.250: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.254: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.262: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.266: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.270: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.274: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.278: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.286: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.290: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.294: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.298: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.302: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.310: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.314: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.318: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.322: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.326: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.334: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.338: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.342: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.346: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.350: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.358: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.362: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.366: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.378: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.382: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.390: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.394: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.398: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.402: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.406: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.414: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.418: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.422: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.426: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.430: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.434: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.442: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.446: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.450: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.454: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.458: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.466: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.470: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.474: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.478: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.482: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.490: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.494: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.498: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.502: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.510: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.514: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.518: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.522: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.526: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.530: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.538: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.542: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.546: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.550: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.554: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.562: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.566: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.570: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.574: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.578: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.586: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.590: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.594: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.598: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.602: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.610: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.614: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.618: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.622: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.626: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.634: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.638: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.642: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.646: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.654: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.658: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.662: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.666: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.670: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.678: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.682: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.686: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.690: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.694: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.702: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.706: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.710: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.714: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.718: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.726: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.730: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.734: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.738: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.742: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.750: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.754: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.762: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.766: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.770: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.774: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.782: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.786: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.791: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.795: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.799: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.807: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.811: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.815: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.819: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.823: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.831: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.835: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.839: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.843: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.847: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.855: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.859: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.863: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.867: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.871: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.879: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.883: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.887: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.891: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.895: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.903: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.907: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.911: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.915: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.919: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.927: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.931: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.935: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.939: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.943: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.951: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.955: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.959: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.963: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.967: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.975: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.979: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.983: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.987: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.991: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:10.999: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.003: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.007: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.011: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.019: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.023: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.027: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.031: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.035: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.043: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.047: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.051: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.055: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.059: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.067: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.071: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.075: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.079: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.083: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.091: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.095: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.099: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.103: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.107: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.115: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.119: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.123: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.127: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.131: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.139: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.143: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.147: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.151: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.155: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.163: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.167: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.171: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.175: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.183: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.187: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.191: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.195: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.199: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.207: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.211: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.215: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.219: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.223: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.231: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.235: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.239: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.243: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.247: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.255: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.259: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.263: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.267: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.271: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.279: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.283: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.287: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.291: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.295: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.303: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.307: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.311: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.315: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.319: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.327: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.331: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.335: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.339: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.343: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.351: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.355: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.359: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.363: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.371: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.375: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.387: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.391: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.395: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.404: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.408: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.412: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.416: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.420: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.428: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.432: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.436: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.440: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.444: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.452: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.456: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.460: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.464: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.468: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.476: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.480: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.484: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.488: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.496: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.500: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.504: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.508: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.512: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.520: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.524: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.528: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.532: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.536: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.544: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.548: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.552: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.556: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.560: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.568: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.572: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.576: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.580: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.584: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.592: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.596: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.600: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.604: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.608: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.616: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.620: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.624: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.628: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.632: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.640: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.644: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.648: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.652: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.656: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.664: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.668: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.672: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.676: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.680: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.688: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.692: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.696: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.704: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.708: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.712: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.716: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.720: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.728: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.732: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 0 RACK9AS>4 [Resuming connection 4 to r4 ... ] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!. Success rate is 99 percent (9184/9185), round-trip min/avg/max = 1/4/60 ms R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] MP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.748: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Ma echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.952: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.960: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.964: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.968: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.972: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.976: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.980: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.988: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.992: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:11.996: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.000: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.008: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.013: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.017: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.021: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.025: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.033: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.037: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.041: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.045: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.053: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.057: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.061: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.065: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.069: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.077: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.081: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.085: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.089: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.093: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.101: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.105: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.109: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.113: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.117: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.125: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.129: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.133: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.137: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.145: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.149: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.153: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.157: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.161: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.169: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.173: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.177: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.181: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.185: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.193: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.197: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.201: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.205: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.209: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.217: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.221: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.225: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.229: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.233: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.241: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.245: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.249: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.253: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.257: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.349: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.357: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.361: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.365: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.369: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.377: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.381: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.385: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.397: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.401: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.405: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.413: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.417: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.421: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.425: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.429: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.437: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:12.441: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:13.355: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:13.359: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:13.367: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:13.371: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:13.375: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:13.379: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:13.383: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:13.391: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:13.395: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:14.404: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:14.416: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:14.420: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:14.424: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:14.432: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:14.436: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:14.440: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:14.444: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:14.448: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:15.406: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:15.410: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:15.414: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:15.426: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:15.430: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:15.434: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:15.438: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:15.446: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:15.450: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.408: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.412: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.416: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.420: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.424: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.436: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.440: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.448: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.452: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.456: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.460: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.464: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.468: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.476: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.480: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.484: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.488: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:16.492: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:17.409: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:17.413: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:17.417: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:17.425: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:17.429: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:17.433: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:17.445: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:17.449: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:17.453: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:18.435: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:18.439: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:18.443: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:18.455: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:18.459: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:18.467: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:18.471: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:18.475: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:18.479: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.437: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.441: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.445: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.449: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.457: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.465: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.473: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.477: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.481: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.485: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.489: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.497: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.501: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.505: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.509: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.513: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.521: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:19.525: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:20.438: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:20.442: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:20.446: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:20.450: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:20.458: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:20.462: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:20.474: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:20.478: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:20.482: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:21.440: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:21.444: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:21.448: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:21.452: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:21.460: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:21.464: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:21.468: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:21.472: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:21.484: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:22.442: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:22.446: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:22.450: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:22.458: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:22.462: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:22.466: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:22.470: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:22.474: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:22.482: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.483: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.487: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.491: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.503: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.507: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.511: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.519: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.523: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.527: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.531: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.535: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.559: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.563: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.567: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.571: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.575: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.583: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:23.587: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:24.481: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:24.489: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:24.493: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:24.497: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:24.501: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:24.513: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:24.517: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:24.521: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:24.529: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:25.487: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:25.491: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:25.495: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:25.499: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:25.507: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:25.511: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:25.523: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:25.527: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:25.531: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.492: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.496: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.504: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.508: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.512: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.516: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.520: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.532: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.536: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.544: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.548: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.552: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.556: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.560: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.568: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.572: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.576: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:26.580: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:27.510: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:27.514: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:27.522: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:27.526: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:27.530: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:27.542: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:27.546: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:27.550: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:27.558: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:28.520: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:28.524: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:28.532: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:28.536: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:28.540: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:28.552: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:28.556: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:28.560: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:28.568: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:29.521: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:29.529: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:29.533: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:29.537: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:29.541: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:29.545: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:29.549: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:29.561: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:29.565: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.523: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.527: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.535: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.539: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.543: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.547: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.551: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.559: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.571: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.575: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.579: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.583: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.591: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.595: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.599: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.603: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.607: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:30.615: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:31.533: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:31.537: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:31.545: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:31.549: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:31.553: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:31.557: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:31.565: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:31.569: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:31.581: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:32.538: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:32.546: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:32.550: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:32.554: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:32.558: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:32.562: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:32.570: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:32.574: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:32.578: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.588: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.600: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.604: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.608: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.616: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.620: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.624: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.628: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.632: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.640: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.644: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.648: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.652: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.656: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.664: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.668: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.672: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:33.676: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:34.594: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:34.598: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:34.610: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:34.614: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:34.618: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:34.626: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:34.630: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:34.634: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:34.638: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:35.595: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:35.599: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:35.607: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:35.619: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:35.623: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:35.627: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:35.631: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:35.639: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:35.643: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:36.601: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:36.609: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:36.613: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:36.617: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:36.629: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:36.633: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:36.637: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:36.645: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:36.649: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.606: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.610: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.614: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.622: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.626: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.639: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.643: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.647: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.655: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.659: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.663: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.667: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.671: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.679: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.683: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.687: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.695: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:37.699: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:38.612: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:38.616: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:38.620: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:38.624: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:38.632: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:38.636: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:38.648: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:38.652: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:38.660: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:39.618: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:39.622: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:39.626: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:39.630: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:39.634: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:39.642: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:39.646: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:39.658: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:39.662: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.619: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.627: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.631: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.635: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.639: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.647: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.651: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.655: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.667: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.671: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.675: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.684: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.688: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.692: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.696: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.700: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.708: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:40.712: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:41.625: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:41.629: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:41.637: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:41.641: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:41.645: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:41.649: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:41.653: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:41.661: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:41.665: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:42.675: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:42.687: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:42.691: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:42.695: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:42.703: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:42.707: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:42.711: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:42.715: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:42.719: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:43.668: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:43.672: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:43.676: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:43.684: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:43.696: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:43.700: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:43.704: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:43.712: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:43.716: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:44.069: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 *Mar 1 07:46:44.073: ICMP: echo reply sent, src 17.80.1.22, dst 17.80.1.2 R3# R3#u all All possible debugging has been turned off R3# R3# R3# R3#u all All possible debugging has been turned off R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#ip nat out R3(config-if)#int s 1/2 R3(config-if)#int s 1/2p nat out   in R3(config-if)#^Z R3#s *Mar 1 07:47:36.996: %SYS-5-CONFIG_I: Configured from console by console R3#sh run int s 1/2 Building configuration... Current configuration : 203 bytes ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 ip nat inside encapsulation ppp ppp reliable-link ppp authentication pap optional ppp pap sent-username Two password 0 For-The-Show end R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#ping 17.80.1.22 rep 10000000 Type escape sequence to abort. Sending 10000000, 100-byte ICMP Echos to 17.80.1.22, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!! RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh deb R3#deb ip nat IP NAT debugging is on R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!! RACK9AS> [Resuming connection 4 to r4 ... ] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !. Success rate is 99 percent (5601/5602), round-trip min/avg/max = 1/4/108 ms R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip nat innt s 1/2p nat outnt fa 0/0log buff  do sh ip nat tranip nat in nt fa 0/0p nat outnt s 1/2 p nat out sou sta 180.40.7.2 17.80.1.22 nip nat out sou sta 180.40.7.2 17.80.1.22 oip nat out sou sta 180.40.7.2 17.80.1.22  ip nat out sou sta 180.40.7.2 17.80.1.22  R3(config)#ip n *Mar 1 07:48:26.950: ipnat_remove_static_cfg: id 0, flag A R3(config)#ip nat int sou ? % Unrecognized command R3(config)#ip nat int sou      ? % Unrecognized command R3(config)#ip nat int     sou stat 180.40.7.2 1~ ~~no ip nat out sou sta 180.40.7.2 17.80.1.22 ~~~    ip nat in sou stat 180.40.7.2 1~~    ? A.B.C.D Inside global IP address interface Specify interface for global address R3(config)#ip nat in sou stat 180.40.7.2 ~~  17.80.1.3 22 R3(config)# *Mar 1 07:49:08.137: ipnat_add_static_cfg: id 1, flag 6 *Mar 1 07:49:08.137: id 1, flags 0, domain 0, lookup 0, from_addr B4280702, from_mask FFFFFFFF, from_port 0, to_addr 11500116, to_port 0 to_mask FFFFFFFF, proto 0 R3(config)#^Z R3# *Mar 1 07:49:09.491: %SYS-5-CONFIG_I: Configured from console by console R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#ping 17.80.1.22 rep 10000000 Type escape sequence to abort. Sending 10000000, 100-byte ICMP Echos to 17.80.1.22, timeout is 2 seconds: .. RACK9AS>3 [Resuming connection 3 to r3 ... ] *Ma *Mar 1 07:49:18.134: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14804] R3# R3# *Mar 1 07:49:20.133: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14805] R3# *Mar 1 07:49:22.136: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14806] R3# *Mar 1 07:49:24.135: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14807] R3# *Mar 1 07:49:26.135: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14808] R3# *Mar 1 07:49:28.134: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14809] R3# *Mar 1 07:49:30.133: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14810] R3# *Mar 1 07:49:32.133: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14811] R3#ping 180 *Mar 1 07:49:34.136: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14812] R3#ping 180.40.7.1  *Mar 1 07:49:36.135: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14813] R3#ping 180.40.7.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 28/29/32 ms R3# *Mar 1 07:49:38.134: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14814] R3# *Mar 1 07:49:40.134: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14815] R3# *Mar 1 07:49:42.133: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14816] R3# *Mar 1 07:49:44.132: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14817] R3# *Mar 1 07:49:46.136: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14818] R3# *Mar 1 07:49:48.135: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14819] R3#u all All possible debugging has been turned off R3#conf *Mar 1 07:49:50.134: NAT*: s=17.80.1.2, d=17.80.1.22->180.40.7.2 [14820] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#\ip nat in sou stat 180.40.7.2 17.80.1.22no ip nat out sou sta 180.40.7.2 17.80.1.22                      7.80.1.2 180.40.. = . 7.4 %Translation not found R3(config)#no ip nat out sou sta 17.80.1.2 180.40.7.4no ip nat out sou sta 17.80.1.2 180.40.7.4  ip nat out sou sta 17.80.1.2 180.40.7.4  R3(config)#^Z R3#de *Mar 1 07:50:21.025: %SYS-5-CONFIG_I: Configured from console by console R3#deb ip nat IP NAT debugging is on R3# *Mar 1 07:50:24.134: NAT*: s=17.80.1.2->180.40.7.4, d=17.80.1.22 [14837] *Mar 1 07:50:24.134: NAT*: s=180.40.7.4, d=17.80.1.22->180.40.7.2 [14837] R3# *Mar 1 07:50:26.133: NAT*: s=17.80.1.2->180.40.7.4, d=17.80.1.22 [14838] *Mar 1 07:50:26.133: NAT*: s=180.40.7.4, d=17.80.1.22->180.40.7.2 [14838] R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] ................................... ........ Success rate is 0 percent (0/78) R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Mar R3#u all All possible debugging has been turned off R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)# ip nat out sou sta 17.80.1.2 180.40.7.4n ip nat out sou sta 17.80.1.2 180.40.7.4o ip nat out sou sta 17.80.1.2 180.40.7.4 ip nat out sou sta 17.80.1.2 180.40.7.4 Static entry in use, do you want to delete child entries? [no]: y R3(config)#yno ip nat out sou sta 17.80.1.2 180.40.7.4 ip nat out sou sta 17.80.1.2 180.40.7.4 no ip nat out sou sta 17.80.1.2 180.40.7.4ip nat in sou stat 180.40.7.2 17.80.1.22 no ip nat out sou sta 17.80.1.2 180.40.7.4 ip nat out sou sta 17.80.1.2 180.40.7.4 no ip nat out sou sta 17.80.1.2 180.40.7.4y  int fa 0/0 R3(config-if)#int fa 0/0no ip nat  ip nat out R3(config-if)#intp nat out   in R3(config-if)#int s 1/. 2 R3(config-if)#noip nat       nat out ^ % Invalid input detected at '^' marker. R3(config-if)#no nat outinat outpnat out nat outnat out % Interface is inside enabled, try R3(config-if)#no ip nat out   in R3(config-if)#exit R3(config)#do sh run | i ip nat ip nat inside ip nat inside source static 180.40.7.2 17.80.1.22 R3(config)#int     int     no ip nat inside source static 180.40.7.2 17.80.1.22 R3(config)#do sh run int s 1/2 Building configuration... Current configuration : 188 bytes ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 encapsulation ppp ppp reliable-link ppp authentication pap optional ppp pap sent-username Two password 0 For-The-Show end R3(config)#do sh run int s 1/2     fa 0/0 Building configuration... Current configuration : 109 bytes ! interface FastEthernet0/0 ip address 17.80.1.1 255.255.255.0 ip nat inside duplex auto speed auto end R3(config)#no ip nat inside % Incomplete command. R3(config)#int fa 0/0 R3(config-if)#int fa 0/0no ip nat inside R3(config-if)#^Z R3# *Mar 1 07:57:25.464: %SYS-5-CONFIG_I: Configured from console by console R3#q R3 con0 is now available Press RETURN to get started.