R1(config-router)#^Z
R1#sh
*Mar  1 21:11:26.606: %SYS-5-CONFIG_I: Configured from console by console
R1#sh run | b router
router bgp 300
 no synchronization
 bgp log-neighbor-changes
 network 10.0.0.0
 network 17.57.100.0 mask 255.255.255.0
 network 180.40.7.64 mask 255.255.255.224
 network 180.40.7.128 mask 255.255.255.224
 network 208.28.1.0 mask 255.255.255.248
 network 208.28.1.64 mask 255.255.255.240
 neighbor 17.57.100.2 remote-as 300
 neighbor 180.40.7.65 remote-as 100
 neighbor 180.40.7.129 remote-as 100
 neighbor 208.28.1.2 remote-as 100
 neighbor 208.28.1.2 route-map Prob5 out
 neighbor 208.28.1.65 remote-as 200
 neighbor 208.28.1.65 route-map ToR5 out
 no auto-summary
!
no ip http server
ip classless
!
!
!
access-list 1 permit 17.57.102.0 0.0.0.255
!
route-map Prob5 permit 10
 match ip address 1
 set metric 300
!
route-map Prob5 permit 20
!
route-map ToR5 permit 10
 match ip address 1
 set as-path prepend 300 300 300
!
route-map ToR5 permit 20
!
!
call rsvp-sync
!
!
mgcp profile default
!
dial-peer cor custom
!
!


R2#sh run | b router
router bgp 100
 no synchronization
 bgp log-neighbor-changes
 bgp bestpath med missing-as-worst     <---------------- on router 3 also
 network 20.0.0.0
 network 180.40.7.0 mask 255.255.255.224
 neighbor 180.40.7.3 remote-as 100
 neighbor 180.40.7.3 route-map FromR3 in
 neighbor 180.40.7.66 remote-as 300
 neighbor 180.40.7.66 route-map Prob3a in
 neighbor 180.40.7.130 remote-as 300
 neighbor 180.40.7.130 route-map Prob3b in
 neighbor 208.28.1.130 remote-as 200
 neighbor 208.28.1.130 route-map Prob2 in
 no auto-summary
!
no ip http server
no ip http secure-server
ip classless
!
ip as-path access-list 1 permit ^200$
!
!

R2#