! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! logging queue-limit 100 ! memory-size iomem 10 ip subnet-zero ! ! no ip domain lookup ! mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! interface Loopback0 ip address 223.1.1.1 255.255.255.0 ! interface Tunnel0 ip address 13.13.13.1 255.255.255.0 tunnel source Loopback0 tunnel destination 222.1.1.3 no shutdown ! interface Ethernet0/0 ip address 208.28.1.66 255.255.255.240 half-duplex no shutdown ! interface Serial0/0 no ip address encapsulation frame-relay no shutdown ! interface Serial0/0.1 point-to-point ip address 208.28.1.1 255.255.255.248 frame-relay interface-dlci 103 no shutdown ! interface Serial0/0.2 point-to-point ip address 180.40.7.66 255.255.255.224 frame-relay interface-dlci 102 no shutdown ! interface Ethernet0/1 ip address 17.57.100.1 255.255.255.0 half-duplex no shutdown ! interface Serial0/1 no ip address shutdown ! router eigrp 100 redistribute rip metric 128 10000 255 1 1500 redistribute ospf 12 metric 128 10000 255 1 1500 network 180.40.7.64 0.0.0.31 network 208.28.1.64 0.0.0.15 neighbor 180.40.7.65 Serial0/0.2 auto-summary ! router ospf 1 router-id 1.1.1.1 log-adjacency-changes redistribute eigrp 100 subnets redistribute rip subnets network 13.13.13.1 0.0.0.0 area 0 network 17.57.100.1 0.0.0.0 area 0 distribute-list 2 out rip distance 130 3.3.3.3 0.0.0.0 3 ! router rip version 2 redistribute eigrp 100 metric 3 redistribute ospf 1 metric 2 passive-interface Ethernet0/0 passive-interface Serial0/0.2 offset-list 1 out 4 network 208.28.1.0 network 223.1.1.0 neighbor 208.28.1.3 maximum-paths 3 no auto-summary ! no ip http server ip classless ! ! ! access-list 1 permit 208.28.1.193 access-list 2 deny 223.1.1.0 0.0.0.255 access-list 2 permit any access-list 3 permit 222.1.1.0 0.0.0.255 ! ! call rsvp-sync ! ! mgcp profile default ! dial-peer cor custom ! ! ! ! line con 0 logging synchronous line aux 0 line vty 0 4 ! ! end