=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2005.08.22 15:04:45 =~=~=~=~=~=~=~=~=~=~=~= S6# S6# S6#sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4 Fa0/5, Fa0/6, Fa0/7, Fa0/8 Fa0/9, Fa0/10, Fa0/11, Fa0/12 Fa0/13, Fa0/14, Fa0/15, Fa0/16 Fa0/17, Fa0/18, Fa0/19, Fa0/20 Fa0/21, Fa0/22, Fa0/23, Gi0/1 Gi0/2 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 tr 101003 1500 - - - - - 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 1005 trnet 101005 1500 - - - ibm - 0 0 --More--   Primary Secondary Type Ports ------- --------- ----------------- ------------------------------------------ S6#vlan data % Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. S6(vlan)# S6(vlan)# S6(vlan)# S6(vlan)# S6(vlan)# S6(vlan)# S6(vlan)#exit APPLY completed. Exiting.... S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#vlan 10 S6(config-vlan)#do sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4 Fa0/5, Fa0/6, Fa0/7, Fa0/8 Fa0/9, Fa0/10, Fa0/11, Fa0/12 Fa0/13, Fa0/14, Fa0/15, Fa0/16 Fa0/17, Fa0/18, Fa0/19, Fa0/20 Fa0/21, Fa0/22, Fa0/23, Gi0/1 Gi0/2 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 tr 101003 1500 - - - - - 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 1005 trnet 101005 1500 - - - ibm - 0 0 --More--   Primary Secondary Type Ports ------- --------- ----------------- ------------------------------------------ S6(config-vlan)#jgj2n ^ % Invalid input detected at '^' marker. S6(config-vlan)# S6(config-vlan)#en ^ % Invalid input detected at '^' marker. S6(config-vlan)#enjgj2ndo sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4 Fa0/5, Fa0/6, Fa0/7, Fa0/8 Fa0/9, Fa0/10, Fa0/11, Fa0/12 Fa0/13, Fa0/14, Fa0/15, Fa0/16 Fa0/17, Fa0/18, Fa0/19, Fa0/20 Fa0/21, Fa0/22, Fa0/23, Gi0/1 Gi0/2 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 tr 101003 1500 - - - - - 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 1005 trnet 101005 1500 - - - ibm - 0 0 --More--   Primary Secondary Type Ports ------- --------- ----------------- ------------------------------------------ S6(config-vlan)#q exit S6(config)#exitdo sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4 Fa0/5, Fa0/6, Fa0/7, Fa0/8 Fa0/9, Fa0/10, Fa0/11, Fa0/12 Fa0/13, Fa0/14, Fa0/15, Fa0/16 Fa0/17, Fa0/18, Fa0/19, Fa0/20 Fa0/21, Fa0/22, Fa0/23, Gi0/1 Gi0/2 10 VLAN0010 active 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 10 enet 100010 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 tr 101003 1500 - - - - - 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 --More-- RACK98AS>5 [Resuming connection 5 to r5 ... ] S5#sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4 Fa0/5, Fa0/6, Fa0/7, Fa0/8 Fa0/9, Fa0/10, Fa0/11, Fa0/12 Fa0/13, Fa0/14, Fa0/15, Fa0/16 Fa0/17, Fa0/18, Fa0/19, Fa0/20 Fa0/21, Fa0/22, Fa0/23, Gi0/1 Gi0/2 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------ 1 enet 100001 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 tr 101003 1500 - - - - - 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 1005 trnet 101005 1500 - - - ibm - 0 0 --More-- RACK98AS>5 6 [Resuming connection 6 to r6 ... ]  1005 trnet 101005 1500 - - - ibm - 0 0 --More--   Primary Secondary Type Ports ------- --------- ----------------- ------------------------------------------ S6(config)#w vtp dom GrAce   aceland Changing VTP domain name from NULL to Graceland S6(config)# S6(config)# S6(config)# S6(config)# S6(config)# S6(config)# S6(config)# S6(config)# S6(config)# RACK98AS>5 [Resuming connection 5 to r5 ... ]  Remote SPAN VLANs --More--   Primary Secondary Type Ports ------- --------- ----------------- ------------------------------------------ S5#[Ash vlan   tp status VTP Version : 2 Configuration Revision : 1 Maximum VLANs supported locally : 1005 Number of existing VLANs : 6 VTP Operating Mode : Server VTP Domain Name : Graceland VTP Pruning Mode : Disabled VTP V2 Mode : Disabled VTP Traps Generation : Disabled MD5 digest : 0xA1 0x56 0xB8 0xCB 0x5A 0xEB 0x85 0x04 Configuration last modified by 0.0.0.0 at 3-1-93 05:43:20 Local updater ID is 0.0.0.0 (no valid interface found) S5#sh int t5ru   run int ^ % Invalid input detected at '^' marker. S5#sh int trun int        trun Port Mode Encapsulation Status Native vlan Fa0/24 desirable n-isl trunking 1 Port Vlans allowed on trunk Fa0/24 1-4094 Port Vlans allowed and active in management domain Fa0/24 1,10 Port Vlans in spanning tree forwarding state and not pruned Fa0/24 1,10 S5# S5# S5# S5# S5#sh nit fa 0/24sh nit fa 0/24 t fa 0/24 it fa 0/24nt fa 0/24t fa 0/24 swi S5#sh int fa 0/24 switchport Name: Fa0/24 Switchport: Enabled Administrative Mode: dynamic desirable Operational Mode: trunk Administrative Trunking Encapsulation: negotiate Operational Trunking Encapsulation: isl Negotiation of Trunking: On Access Mode VLAN: 1 (default) Trunking Native Mode VLAN: 1 (default) Voice VLAN: none Administrative private-vlan host-association: none Administrative private-vlan mapping: none Administrative private-vlan trunk native VLAN: none Administrative private-vlan trunk encapsulation: dot1q Administrative private-vlan trunk normal VLANs: none Administrative private-vlan trunk private VLANs: none Operational private-vlan: none Trunking VLANs Enabled: ALL Pruning VLANs Enabled: 2-1001 Capture Mode Disabled Capture VLANs Allowed: ALL Protected: false Unknown unicast blocked: disabled --More--   S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int fa 0/24 S5(config-if)#swi S5(config-if)#switchport mode S5(config-if)#switchport mode tru S5(config-if)#switchport mode trunk Command rejected: An interface whose trunk encapsulation is "Auto" can not be configured to "trunk" mode. S5(config-if)#swi S5(config-if)#switchport tru S5(config-if)#switchport trunk en S5(config-if)#switchport trunk encapsulation do S5(config-if)#switchport trunk encapsulation dot1q ? S5(config-if)#switchport trunk encapsulation dot1q   S5(config-if)# 05:47:07: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to down S5(config-if)# 05:47:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to up S5(config-if)#^Z S5# 05:47:21: %SYS-5-CONFIG_I: Configured from console by console S5#config tsh int fa 0/24 switchport config t  Enter configuration commands, one per line. End with CNTL/Z. S5(config)#switchport trunk encapsulation dot1qmode trunk int fa 0/24  S5(config-if)#int fa 0/24switchport trunk encapsulation dot1qmode trunk  S5(config-if)#^Z S5# 05:47:32: %SYS-5-CONFIG_I: Configured from console by console S5# RACK98AS>67 % 67 is not an open connection RACK98AS>67  [Resuming connection 6 to r6 ... ] 0 S6(config)#int fa -0  0/24 S6(config-if)#switch trun enca dot S6(config-if)#switch mode trun S6(config-if)#exit S6(config)#vlabn    n 20 S6(config-vlan)#exit S6(config)#vlan 34 S6(config-vlan)#name BlueSude  ede S6(config-vlan)#exit S6(config)#int s fa 0/2 S6(config-if)#swi S6(config-if)#switchport mode access S6(config-if)#swi S6(config-if)#switchport access vlan 20 S6(config-if)#int s   fa 0/4 S6(config-if)#int fa 0/4switchport access vlan 20mode access  S6(config-if)#switchport mode accessint fa 0/4 switchport access vlan 20  34 S6(config-if)#span S6(config-if)#spanning-tree p S6(config-if)#spanning-tree porto f S6(config-if)#spanning-tree portfast %Warning: portfast should only be enabled on ports connected to a single host. Connecting hubs, concentrators, switches, bridges, etc... to this interface when portfast is enabled, can cause temporary bridging loops. Use with CAUTION %Portfast has been configured on FastEthernet0/4 but will only have effect when the interface is in a non-trunking mode. S6(config-if)#spanning-tree portfast witchport access vlan 34mode access int fa 0/4 switchport access vlan 20int fa 0/4  \ 2 S6(config-if)#int fa 0/2spanning-tree portfast %Warning: portfast should only be enabled on ports connected to a single host. Connecting hubs, concentrators, switches, bridges, etc... to this interface when portfast is enabled, can cause temporary bridging loops. Use with CAUTION %Portfast has been configured on FastEthernet0/2 but will only have effect when the interface is in a non-trunking mode. S6(config-if)#int fa 0/1 - 23 ^ % Invalid input detected at '^' marker. S6(config)#int fa 0/1 - 23int fa 0/1 - 23r fa 0/1 - 23a fa 0/1 - 23n fa 0/1 - 23g fa 0/1 - 23e fa 0/1 - 23 fa 0/1 - 23 S6(config-if-range)#int range fa 0/1 - 23fa 0/1 - 23 spanning-tree portfast %Warning: portfast should only be enabled on ports connected to a single host. Connecting hubs, concentrators, switches, bridges, etc... to this interface when portfast is enabled, can cause temporary bridging loops. Use with CAUTION %Portfast will be configured in 23 interfaces due to the range command but will only have effect when the interfaces are in a non-trunking mode. S6(config-if-range)#^Z S6# 05:50:32: %SYS-5-CONFIG_I: Configured from console by console S6# RACK98AS>5 [Resuming connection 5 to r5 ... ] S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int range fa 0/1-  - 23 S5(config-if-range)#span S5(config-if-range)#spanning-tree portf %Warning: portfast should only be enabled on ports connected to a single host. Connecting hubs, concentrators, switches, bridges, etc... to this interface when portfast is enabled, can cause temporary bridging loops. Use with CAUTION %Portfast will be configured in 23 interfaces due to the range command but will only have effect when the interfaces are in a non-trunking mode. S5(config-if-range)#do sh run Building configuration... Current configuration : 2677 bytes ! version 12.1 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname S5 ! ! ip subnet-zero ! no ip domain-lookup ! spanning-tree mode pvst spanning-tree extend system-id ! ! ! ! ! --More--  interface FastEthernet0/1 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/2 switchport mode dynamic desirable shutdown spanning-tree portfast ! interface FastEthernet0/3 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/4 switchport mode dynamic desirable shutdown spanning-tree portfast ! interface FastEthernet0/5 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/6 --More--   S5(config-if-range)#int 3 fa -0  0/3 S5(config-if)#switch mode access S5(config-if)#switch acc vlan 34 S5(config-if)#int fa 0/1 S5(config-if)#vlan    swich mode access ^ % Invalid input detected at '^' marker. S5(config-if)#swich mode accesstch mode access S5(config-if)#a sw acc vl 10 S5(config-if)#int vlan 10 S5(config-if)#ip addres 05:55:39: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, changed state to up S5(config-if)#ip addres ~nt vlan 10~p addres ~ nt vlan 10~p addres ~  208.28.1.65 288.2    55.255.255.240 S5(config-if)#noshu    shut S5(config-if)#int vlan 20 S5(config-if)#int vlan 20no shut  05:56:14: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan20, changed state to up S5(config-if)#no shutip addres 208.28.1.65 255.255.255.240  24 255.255.255.224  255.255.255.224 1 255.255.255.2243 255.255.255.2240 255.255.255.224 S5(config-if)#^Z S5# 05:56:38: %SYS-5-CONFIG_I: Configured from console by console S5#ping 208.28.1.63 6 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.66, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/205/1016 ms S5#ping 208.28.1.66  129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/201/1000 ms S5# S5# S5# RACK98AS>6 [Resuming connection 6 to r6 ... ] S6#confi gt ^ % Invalid input detected at '^' marker. S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 0/1 S6(config-if)#no    ip addres 17.578  7.100.2 255.0 255.255.0 ^ % Invalid input detected at '^' marker. S6(config-if)#ip addres 17.57.100.2 255.255.255.0 no swi S6(config-if)#no switchport S6(config-if)#no switchport ip addres 17.57.100.2 255.255.255.0 S6(config-if)# 05:57:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down S6(config-if)# 05:57:35: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to down S6(config-if)# 05:57:37: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up 05:57:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up S6(config-if)#^Z S6#pin 05:57:42: %SYS-5-CONFIG_I: Configured from console by console S6#ping 17.57.100.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.57.100.1, timeout is 2 seconds: .. RACK98AS>1 [Resuming connection 1 to r1 ... ] R1#sh ip int brie Interface IP-Address OK? Method Status Protocol Ethernet0/0 208.28.1.66 YES manual up up Serial0/0 unassigned YES manual up up Serial0/0.1 208.28.1.1 YES manual up up Ethernet0/1 unassigned YES unset administratively down down Serial0/1 unassigned YES unset administratively down down Virtual-Access1 unassigned YES unset up up R1#confi gt ^ % Invalid input detected at '^' marker. R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int e 0/1 R1(config-if)#ip address 17.57.100.1 255.255.255.0 R1(config-if)#noshut ^ % Invalid input detected at '^' marker. R1(config-if)#noshut ^ % Invalid input detected at '^' marker. R1(config-if)#no sht ut R1(config-if)#^Z R1# *Mar 1 05:56:16.778: %SYS-5-CONFIG_I: Configured from console by console R1# *Mar 1 05:56:17.455: %LINK-3-UPDOWN: Interface Ethernet0/1, changed state to up *Mar 1 05:56:18.481: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/1, changed state to up R1# RACK98AS>6 [Resuming connection 6 to r6 ... ] .. S6#ping 17.57.100.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.57.100.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/202/1000 ms S6# RACK98AS>3 [Resuming connection 3 to r3 ... ] R3#ping 17.3 80.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.2, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 1/2/4 ms R3# RACK98AS>5 [Resuming connection 5 to r5 ... ] S5#sh run Building configuration... Current configuration : 2828 bytes ! version 12.1 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname S5 ! ! ip subnet-zero ! no ip domain-lookup ! spanning-tree mode pvst spanning-tree extend system-id ! ! ! ! ! --More--  interface FastEthernet0/1 switchport access vlan 10 switchport mode access spanning-tree portfast ! interface FastEthernet0/2 switchport mode dynamic desirable shutdown spanning-tree portfast ! interface FastEthernet0/3 switchport access vlan 34 switchport mode access spanning-tree portfast ! interface FastEthernet0/4 switchport mode dynamic desirable shutdown spanning-tree portfast ! interface FastEthernet0/5 switchport mode dynamic desirable spanning-tree portfast --More--  ! interface FastEthernet0/6 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/7 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/8 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/9 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/10 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/11 switchport mode dynamic desirable --More--   spanning-tree portfast ! interface FastEthernet0/12 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/13 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/14 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/15 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/16 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/17 --More--   switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/18 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/19 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/20 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/21 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/22 switchport mode dynamic desirable spanning-tree portfast ! --More--  interface FastEthernet0/23 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk ! interface GigabitEthernet0/1 switchport mode dynamic desirable ! interface GigabitEthernet0/2 switchport mode dynamic desirable ! interface Vlan1 no ip address shutdown ! interface Vlan10 ip address 208.28.1.65 255.255.255.240 ! interface Vlan20 ip address 208.28.1.130 255.255.255.224 --More--  ! ip classless ip http server ! ! line con 0 exec-timeout 0 0 logging synchronous line vty 0 4 login line vty 5 15 login ! ! end S5# RACK98AS>6 [Resuming connection 6 to r6 ... ] S6#shu  run Building configuration... Current configuration : 2717 bytes ! version 12.1 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname S6 ! ! ip subnet-zero ! no ip domain-lookup ! spanning-tree mode pvst spanning-tree extend system-id ! ! ! ! ! --More--  interface FastEthernet0/1 no switchport ip address 17.57.100.2 255.255.255.0 spanning-tree portfast ! interface FastEthernet0/2 switchport access vlan 20 switchport mode access spanning-tree portfast ! interface FastEthernet0/3 switchport mode dynamic desirable shutdown spanning-tree portfast ! interface FastEthernet0/4 switchport access vlan 34 switchport mode access spanning-tree portfast ! interface FastEthernet0/5 switchport mode dynamic desirable spanning-tree portfast --More--  ! interface FastEthernet0/6 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/7 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/8 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/9 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/10 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/11 switchport mode dynamic desirable --More--   spanning-tree portfast ! interface FastEthernet0/12 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/13 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/14 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/15 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/16 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/17 --More--   switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/18 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/19 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/20 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/21 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/22 switchport mode dynamic desirable spanning-tree portfast ! --More--  interface FastEthernet0/23 switchport mode dynamic desirable spanning-tree portfast ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk ! interface GigabitEthernet0/1 switchport mode dynamic desirable ! interface GigabitEthernet0/2 switchport mode dynamic desirable ! interface Vlan1 no ip address shutdown ! ip classless ip http server ! ! line con 0 --More--   exec-timeout 0 0 logging synchronous line vty 0 4 login line vty 5 15 login ! ! end S6# S6# RACK98AS>1 [Resuming connection 1 to r1 ... ] R1#sh run Building configuration... Current configuration : 968 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! logging queue-limit 100 ! memory-size iomem 10 ip subnet-zero ! ! no ip domain lookup ! mpls ldp logging neighbor-changes ! ! ! ! --More--  ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! interface Ethernet0/0 ip address 208.28.1.66 255.255.255.240 half-duplex ! interface Serial0/0 no ip address encapsulation frame-relay no fair-queue ! --More--  interface Serial0/0.1 point-to-point ip address 208.28.1.1 255.255.255.248 frame-relay interface-dlci 103 ! interface Ethernet0/1 ip address 17.57.100.1 255.255.255.0 half-duplex ! interface Serial0/1 no ip address shutdown ! ip http server ip classless ! ! ! ! ! call rsvp-sync ! ! mgcp profile default --More-- RACK98AS>2 [Resuming connection 2 to r2 ... ] R2#shrun      run Building configuration... Current configuration : 1402 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R2 ! logging queue-limit 100 ! ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 mpls ldp logging neighbor-changes ! ! ! --More--  ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto --More--  ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 208.28.1.129 255.255.255.224 duplex auto speed auto ! interface Serial1/0 no ip address encapsulation frame-relay no fair-queue ! interface Serial1/0.1 multipoint ip address 208.28.1.3 255.255.255.248 frame-relay interface-dlci 203 ! interface Serial1/1 no ip address shutdown ! --More--   R2#ping 208.28.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/58/61 ms R2# RACK98AS>1 [Resuming connection 1 to r1 ... ]  ! --More--   R1#ping 208.28.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/66/84 ms R1#ping 208.28.1.2 3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.3, timeout is 2 seconds: .... RACK98AS>3 [Resuming connection 3 to r3 ... ] R3#sh run int s 1/0 Building configuration... Current configuration : 126 bytes ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay ip split-horizon no fair-queue end R3# R3# R3# R3# R3# R3# R3#sh fram map Serial1/0 (up): ip 208.28.1.1 dlci 301(0x12D,0x48D0), dynamic, broadcast,, status defined, active Serial1/0 (up): ip 208.28.1.3 dlci 302(0x12E,0x48E0), dynamic, broadcast,, status defined, active R3# R3# R3# R3# R3# R3# R3#confi gt ^ % Invalid input detected at '^' marker. R3#confi ty  Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s 1/0 R3(config-if)#no fram R3(config-if)#no frame-relay in R3(config-if)#no frame-relay in? interface-dlci interface-queue intf-type inverse-arp R3(config-if)#no frame-relay in  inverse-arp\ ^ % Invalid input detected at '^' marker. R3(config-if)#no frame-relay inverse-arp\  R3(config-if)#fram map ip    ? appletalk AppleTalk bridge Bridging bstun Block Serial Tunnel clns ISO CLNS decnet DECnet dlsw Data Link Switching ip IP ipv6 IPV6 ipx Novell IPX llc2 llc2 pppoe PPP over Ethernet qllc qllc protocol rsrb Remote Source-Route Bridging stun Serial Tunnel R3(config-if)#fram map ip ? A.B.C.D Protocol specific address R3(config-if)#fram map ip 2080 .28.1.1 301 R3(config-if)#fram map ip 208.28.1.1 301 2 302 3 302 R3(config-if)#^Z R3# *Mar 1 06:02:17.309: %SYS-5-CONFIG_I: Configured from console by console R3# RACK98AS>1 [Resuming connection 1 to r1 ... ] . R1#ping 208.28.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.3, timeout is 2 seconds: .... RACK98AS>2 [Resuming connection 2 to r2 ... ] R2#sh log Syslog logging: enabled (0 messages dropped, 12 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 34 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: disabled, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 50 message lines logged R2# confi g t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#log buff R2(config)#^Z R2#d *Mar 1 06:02:42.586: %SYS-5-CONFIG_I: Configured from console by console R2#deb ip pack IP packet debugging is on R2# RACK98AS>1 [Resuming connection 1 to r1 ... ] . S R1#ping 208.28.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.3, timeout is 2 seconds: RACK98AS>2 [Resuming connection 2 to r2 ... ] *:02:59.234: IP: tableid=0, s=208.28.1.1 (Serial1/0.1), d=208.28.1.3 (Serial1/0.1), routed via RIB *Mar 1 06:02:59.234: IP: s=208.28.1.1 (Serial1/0.1), d=208.28.1.3 (Serial1/0.1), len 100, rcvd 3 *Mar 1 06:02:59.234: IP: tableid=0, s=208.28.1.3 (local), d=208.28.1.1 (Serial1/0.1), routed via RIB *Mar 1 06:02:59.234: IP: s=208.28.1.3 (local), d=208.28.1.1 (Serial1/0.1), len 100, sending *Mar 1 06:02:59.238: IP: s=208.28.1.3 (local), d=208.28.1.1 (Serial1/0.1), len 100, encapsulation failed R2# R2# *Mar 1 06:03:01.233: IP: tableid=0, s=208.28.1.1 (Serial1/0.1), d=208.28.1.3 (Serial1/0.1), routed via RIB *Mar 1 06:03:01.233: IP: s=208.28.1.1 (Serial1/0.1), d=208.28.1.3 (Serial1/0.1), len 100, rcvd 3 *Mar 1 06:03:01.237: IP: tableid=0, s=208.28.1.3 (local), d=208.28.1.1 (Serial1/0.1), routed via RIB *Mar 1 06:03:01.237: IP: s=208.28.1.3 (local), d=208.28.1.1 (Serial1/0.1), len 100, sending *Mar 1 06:03:01.237: IP: s=208.28.1.3 (local), d=208.28.1.1 (Serial1/0.1), len 100, encapsulation failed R2# *Mar 1 06:03:03.240: IP: tableid=0, s=208.28.1.1 (Serial1/0.1), d=208.28.1.3 (Serial1/0.1), routed via RIB *Mar 1 06:03:03.240: IP: s=208.28.1.1 (Serial1/0.1), d=208.28.1.3 (Serial1/0.1), len 100, rcvd 3 *Mar 1 06:03:03.244: IP: tableid=0, s=208.28.1.3 (local), d=208.28.1.1 (Serial1/0.1), routed via RIB *Mar 1 06:03:03.244: IP: s=208.28.1.3 (local), d=208.28.1.1 (Serial1/0.1), len 100, sending *Mar 1 06:03:03.244: IP: s=208.28.1.3 (local), d=208.28.1.1 (Serial1/0.1), len 100, encapsulation failed R2# *Mar 1 06:03:05.243: IP: tableid=0, s=208.28.1.1 (Serial1/0.1), d=208.28.1.3 (Serial1/0.1), routed via RIB *Mar 1 06:03:05.243: IP: s=208.28.1.1 (Serial1/0.1), d=208.28.1.3 (Serial1/0.1), len 100, rcvd 3 *Mar 1 06:03:05.243: IP: tableid=0, s=208.28.1.3 (local), d=208.28.1.1 (Serial1/0.1), routed via RIB *Mar 1 06:03:05.247: IP: s=208.28.1.3 (local), d=208.28.1.1 (Serial1/0.1), len 100, sending *Mar 1 06:03:05.247: IP: s=208.28.1.3 (local), d=208.28.1.1 (Serial1/0.1), len 100, encapsulation failed R2#u all All possible debugging has been turned off R2#sh fram map Serial1/0.1 (up): ip 208.28.1.2 dlci 203(0xCB,0x30B0), dynamic, broadcast,, status defined, active R2# R2# R2# R2# R2# R2# R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#s 1. /0.1 % Incomplete command. R2(config)#s 1/0.1is 1/0.1ns 1/0.1ts 1/0.1 s 1/0.1 R2(config-subif)# R2(config-subif)# R2(config-subif)# R2(config-subif)# R2(config-subif)# R2(config-subif)#fram map ip 208.28.1.1 20 R2(config-subif)#3fram map ip 208.28.1.1 203 %Address already in map R2(config-subif)#fram map ip 208.28.1.1 203nfram map ip 208.28.1.1 203ofram map ip 208.28.1.1 203 fram map ip 208.28.1.1 203fram map ip 208.28.1.1 20 int s 1/0.1 fram map ip 208.28.1.1 20nfram map ip 208.28.1.1 20ofram map ip 208.28.1.1 20 fram map ip 208.28.1.1 20 R2(config-subif)#no fram map ip 208.28.1.1 20fram map ip 208.28.1.1 203  R2(config-subif)#^Z R2# *Mar 1 06:05:25.966: %SYS-5-CONFIG_I: Configured from console by console R2#sh fram pvc PVC Statistics for interface Serial1/0 (Frame Relay DTE) Active Inactive Deleted Static Local 1 0 0 0 Switched 0 0 0 0 Unused 1 1 0 0 DLCI = 201, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = Serial1/0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 0 out bcast bytes 0 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec switched pkts 0 Detailed packet drop counters: no out intf 0 out intf down 0 no out PVC 0 in PVC down 0 out PVC down 0 pkt too big 0 shaping Q full 0 pkt above DE 0 policing drop 0 --More--   pvc create time 06:05:09, last time pvc status changed 06:04:59 --More--   DLCI = 203, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.1 input pkts 21 output pkts 7 in bytes 2114 out bytes 588 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 2 out bcast bytes 68 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 06:05:12, last time pvc status changed 06:04:40 --More--   DLCI = 207, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = Serial1/0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 0 out bcast bytes 0 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec switched pkts 0 Detailed packet drop counters: no out intf 0 out intf down 0 no out PVC 0 in PVC down 0 out PVC down 0 pkt too big 0 shaping Q full 0 pkt above DE 0 policing drop 0 pvc create time 06:05:12, last time pvc status changed 06:04:52 R2# sh fram map Serial1/0.1 (up): ip 208.28.1.1 dlci 203(0xCB,0x30B0), static, CISCO, status defined, active Serial1/0.1 (up): ip 208.28.1.2 dlci 203(0xCB,0x30B0), dynamic, broadcast,, status defined, active R2# R2# R2# R2# R2# R2# R2# R2# RACK98AS>1 [Resuming connection 1 to r1 ... ] .. R1#ping 208.28.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 112/123/140 ms R1# R1# R1# R1# R1# R1# R1# RACK98AS>2 [Resuming connection 2 to r2 ... ] R2#sh run int s 1/0.1 Building configuration... Current configuration : 146 bytes ! interface Serial1/0.1 multipoint ip address 208.28.1.3 255.255.255.248 frame-relay map ip 208.28.1.1 203 frame-relay interface-dlci 203 end R2# RACK98AS>3 [Resuming connection 3 to r3 ... ] R3#sh run int s 1/0 Building configuration... Current configuration : 224 bytes ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay ip split-horizon no fair-queue frame-relay map ip 208.28.1.1 301 frame-relay map ip 208.28.1.3 302 no frame-relay inverse-arp end R3# R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#user   R3(config)#username One pass d For-The_ -Money R3(config)#int s 1/2 R3(config-if)#shut R3(config-if)# R3(config-if)# R3(config-if)# R3(config-if)# R3(config-if)# *Mar 1 06:11:54.964: %LINK-5-CHANGED: Interface Serial1/2, changed state to administratively down *Mar 1 06:11:55.965: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to down R3(config-if)# R3(config-if)# R3(config-if)# R3(config-if)# R3(config-if)#encap ppp R3(config-if)#pp auth R3(config-if)#pp authe R3(config-if)#pp authentication pap R3(config-if)#ppp pap ? refuse Refuse to authenticate using PAP sent-username Set outbound PAP username wait Wait for caller to authenticate first R3(config-if)#ppp pap sen R3(config-if)#ppp pap sent-username ? WORD Outbound PAP username R3(config-if)#ppp pap sent-username Two ? password Set outbound PAP password R3(config-if)#ppp pap sent-username Two pass ? <0-7> Encryption type (0=not yet encrypted) LINE Outbound PAP password R3(config-if)#ppp pap sent-username Two pass For-The-Show ? LINE R3(config-if)#ppp pap sent-username Two pass For-The-Show  ?    w? LINE R3(config-if)#ppp pap sent-username Two pass For-The-Show? LINE R3(config-if)#ppp pap sent-username Two pass For-The-Show    S? LINE R3(config-if)#ppp pap sent-username Two pass For-The-S?howe     how R3(config-if)# R3(config-if)# R3(config-if)# RACK98AS>2 [Resuming connection 2 to r2 ... ] *M R2#ci onfig t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#user Two pwe  ass For-The-Show R2(config)#int s 1/2 R2(config-if)#enca ppp R2(config-if)#ppp auteh    he pap R2(config-if)#ppp pap sen One pwe  ass For-The-Money R2(config-if)# RACK98AS>3 [Resuming connection 3 to r3 ... ] R3(config-if)#no    do deb pp auth PPP authentication debugging is on R3(config-if)#no shut R3(config-if)# *Mar 1 06:19:53.256: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up *Mar 1 06:19:53.284: Se1/2 PPP: Using default call direction *Mar 1 06:19:53.288: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:19:53.288: Se1/2 PPP: Authorization required *Mar 1 06:19:53.296: Se1/2 PAP: Using hostname from interface PAP *Mar 1 06:19:53.296: Se1/2 PAP: Using password from interface PAP *Mar 1 06:19:53.296: Se1/2 PAP: O AUTH-REQ id 1 len 21 from "Two" *Mar 1 06:19:53.300: Se1/2 PAP: I AUTH-REQ id 1 len 22 from "One" *Mar 1 06:19:53.300: Se1/2 PAP: Authenticating peer One *Mar 1 06:19:53.356: Se1/2 PPP: Sent PAP LOGIN Request *Mar 1 06:19:53.356: Se1/2 PPP: Received LOGIN Response PASS R3(config-if)# *Mar 1 06:19:53.360: Se1/2 PPP: Sent LCP AUTHOR Request *Mar 1 06:19:53.360: Se1/2 LCP: Received AAA AUTHOR Response PASS *Mar 1 06:19:53.360: Se1/2 PAP: O AUTH-ACK id 1 len 5 *Mar 1 06:19:53.364: Se1/2 PAP: I AUTH-ACK id 1 len 5 R3(config-if)# *Mar 1 06:19:54.366: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up R3(config-if)# R3(config-if)# R3(config-if)# R3(config-if)#p   do p 2 180.40.7.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 28/29/33 ms R3(config-if)# R3(config-if)# R3(config-if)# R3(config-if)# R3(config-if)#ppp ? accm Set initial Async Control Character Map accounting Set PPP network accounting method acfc Options for HDLC Address & Control Field Compression authentication Set PPP link authentication method authorization Set PPP network authorization method bridge Enable PPP bridge translation caller Caller option when no CLID is available chap Set CHAP authentication parameters direction Override default PPP direction dnis Authentication via DNIS before LCP eap Set EAP authentication parameters encrypt Enable PPP encryption ipcp Set IPCP negotiation options iphc Set IPCP Header Compression control options lcp PPP LCP configuration legacy-forward Use the legacy PPP Forwarder for forwarding link Set miscellaneous link parameters loopback PPP loopback options max-bad-auth Allow multiple authentication failures max-configure Number of conf-reqs sent before assuming peer is unable to respond max-failure Number of conf-naks sent before assuming configuration is not --More--   converging max-terminate Number of term-reqs sent before assuming peer is unable to respond ms-chap Set MS-CHAP authentication parameters ms-chap-v2 Set MS-CHAP-V2 authentication parameters multilink Make interface multilink capable pap Set PAP authentication parameters pfc Options for Protocol Field Compression quality Set minimum Link Quality before link is down reliable-link Use LAPB with PPP to provide a reliable link timeout Set PPP timeout parameters R3(config-if)#ppp pap ? refuse Refuse to authenticate using PAP sent-username Set outbound PAP username wait Wait for caller to authenticate first R3(config-if)#ppp pap     atur  u  uthe pap ? WORD Use an authentication list with this name callback Authenticate remote on callback only callin Authenticate remote on incoming call only callout Authenticate remote on outgoing call only chap Challenge Handshake Authentication Protocol (CHAP) default Use the default authentication list eap Extensible Authentication Protocol (EAP) ms-chap Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) ms-chap-v2 Microsoft CHAP Version 2 (MS-CHAP-V2) one-time Allow use of username*OTP for one-time passwords optional Allow peer to refuse to authenticate R3(config-if)#ppp authe pap optional R3(config-if)#shutdo sh deb ^ % Invalid input detected at '^' marker. R3(config-if)#shutdo sh deb          R3(config-if)#do sh *Mar 1 06:23:32.010: %LINK-5-CHANGED: Interface Serial1/2, changed state to administratively down *Mar 1 06:23:33.012: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to down R3(config-if)#do sh deb PPP: PPP authentication debugging is on R3(config-if)#do deb ppp ne PPP protocol negotiation debugging is on R3(config-if)# RACK98AS>2 [Resuming connection 2 to r2 ... ] *M R2(config-if)#no ppp authen pap R2(config-if)# RACK98AS>3 [Resuming connection 3 to r3 ... ] R3(config-if)#no suht ^ % Invalid input detected at '^' marker. R3(config-if)#mp   o shut ^ % Invalid input detected at '^' marker. R3(config-if)#no shur t R3(config-if)# *Mar 1 06:24:12.793: Se1/2 PPP: Outbound cdp packet dropped, line protocol not up *Mar 1 06:24:12.813: Se1/2 PPP: Outbound cdp packet dropped, line protocol not up *Mar 1 06:24:12.837: Se1/2 PPP: Outbound cdp packet dropped, line protocol not up R3(config-if)# *Mar 1 06:24:14.769: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up *Mar 1 06:24:14.769: Se1/2 PPP: Using default call direction *Mar 1 06:24:14.769: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:24:14.769: Se1/2 PPP: Phase is ESTABLISHING, Active Open *Mar 1 06:24:14.769: Se1/2 PPP: Authorization required *Mar 1 06:24:14.769: Se1/2 LCP: O CONFREQ [Closed] id 2 len 14 *Mar 1 06:24:14.769: Se1/2 LCP: AuthProto PAP (0x0304C023) *Mar 1 06:24:14.773: Se1/2 LCP: MagicNumber 0x13DF5FAC (0x050613DF5FAC) *Mar 1 06:24:14.777: Se1/2 LCP: I CONFREQ [REQsent] id 2 len 10 *Mar 1 06:24:14.777: Se1/2 LCP: MagicNumber 0x13DF5867 (0x050613DF5867) *Mar 1 06:24:14.777: Se1/2 LCP: O CONFACK [REQsent] id 2 len 10 *Mar 1 06:24:14.777: Se1/2 LCP: MagicNumber 0x13DF5867 (0x050613DF5867) *Mar 1 06:24:14.781: Se1/2 LCP: I CONFACK [ACKsent] id 2 len 14 *Mar 1 06:24:14.781: Se1/2 LCP: AuthProto PAP (0x0304C023) *Mar 1 06:24:14.781: Se1/2 LCP: MagicNumber 0x13DF5FAC (0x050613DF5FAC) *Mar 1 06:24:14.781: Se1/2 LCP: State is Open *Mar 1 06:24:14.781: Se1/2 PPP: Phase is AUTHENTICATING, by this end *Mar 1 06:24:14.789: Se1/2 PAP: I AUTH-REQ id 2 len 22 from "One" *Mar 1 06:24:14.789: Se1/2 PAP: Authenticating peer One *Mar 1 06:24:14.789: Se1/2 PPP: Phase is FORWARDING, Attempting Forward *Mar 1 06:24:14.789: Se1/2 PPP: Phase is AUTHENTICATING, Unauthenticated User *Mar 1 06:24:14.793: Se1/2 PPP: Sent PAP LOGIN Request *Mar 1 06:24:14.793: Se1/2 PPP: Received LOGIN Response PASS *Mar 1 06:24:14.793: Se1/2 PPP: Phase is FORWARDING, Attempting Forward *Mar 1 06:24:14.793: Se1/2 PPP: Phase is AUTHENTICATING, Authenticated User *Mar 1 06:24:14.797: Se1/2 PPP: Sent LCP AUTHOR Request *Mar 1 06:24:14.797: Se1/2 LCP: Received AAA AUTHOR Response PASS *Mar 1 06:24:14.797: Se1/2 PAP: O AUTH-ACK id 2 len 5 *Mar 1 06:24:14.797: Se1/2 PPP: Phase is UP *Mar 1 06:24:14.801: Se1/2 IPCP: O CONFREQ [Closed] id 1 len 10 *Mar 1 06:24:14.801: Se1/2 IPCP: Address 180.40.7.3 (0x0306B4280703) *Mar 1 06:24:14.801: Se1/2 CDPCP: O CONFREQ [Closed] id 1 len 4 *Mar 1 06:24:14.801: Se1/2 PPP: Process pending packets *Mar 1 06:24:14.805: Se1/2 IPCP: I CONFREQ [REQsent] id 1 len 10 *Mar 1 06:24:14.805: Se1/2 IPCP: Address 180.40.7.2 (0x0306B4280702) *Mar 1 06:24:14.809: Se1/2 AAA/AUTHOR/IPCP: Start. Her address 180.40.7.2, we want 0.0.0.0 *Mar 1 06:24:14.809: Se1/2 AAA/AUTHOR/IPCP: Reject 180.40.7.2, using 0.0.0.0 *Mar 1 06:24:14.809: Se1/2 AAA/AUTHOR/IPCP: Done. Her address 180.40.7.2, we want 0.0.0.0 *Mar 1 06:24:14.809: Se1/2 IPCP: O CONFACK [REQsent] id 1 len 10 *Mar 1 06:24:14.809: Se1/2 IPCP: Address 180.40.7.2 (0x0306B4280702) *Mar 1 06:24:14.809: Se1/2 IPCP: I CONFACK [ACKsent] id 1 len 10 *Mar 1 06:24:14.813: Se1/2 IPCP: Address 180.40.7.3 (0x0306B4280703) *Mar 1 06:24:14.813: Se1/2 IPCP: State is Open *Mar 1 06:24:14.813: Se1/2 CDPCP: I CONFREQ [REQsent] id 1 len 4 *Mar 1 06:24:14.813: Se1/2 CDPCP: O CONFACK [REQsent] id 1 len 4 *Mar 1 06:24:14.813: Se1/2 CDPCP: I CONFACK [ACKsent] id 1 len 4 *Mar 1 06:24:14.813: Se1/2 CDPCP: State is Open *Mar 1 06:24:14.817: Se1/2 IPCP: Install route to 180.40.7.2 *Mar 1 06:24:14.817: Se1/2 IPCP: Add link info for cef entry 180.40.7.2 *Mar 1 06:24:15.798: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up R3(config-if)# R3(config-if)# R3(config-if)# R3(config-if)#^Z R3# *Mar 1 06:25:17.415: %SYS-5-CONFIG_I: Configured from console by console R3# RACK98AS>2 [Resuming connection 2 to r2 ... ] *Mar R2(config-if)#no ppp authen papno ppp authen pap  ppp authen pap  R2(config-if)# RACK98AS>3 [Resuming connection 3 to r3 ... ] *Me link info for cef entry 180.40.7.2 *Mar 1 06:25:57.112: Se1/2 IPCP: State is Closed *Mar 1 06:25:57.112: Se1/2 PPP: Phase is TERMINATING *Mar 1 06:25:57.112: Se1/2 PPP: Authorization required *Mar 1 06:25:57.112: Se1/2 PPP: Phase is ESTABLISHING *Mar 1 06:25:57.112: Se1/2 LCP: O CONFREQ [Open] id 3 len 14 *Mar 1 06:25:57.112: Se1/2 LCP: AuthProto PAP (0x0304C023) *Mar 1 06:25:57.116: Se1/2 LCP: MagicNumber 0x13E0EF75 (0x050613E0EF75) *Mar 1 06:25:57.116: Se1/2 LCP: O CONFACK [Open] id 3 len 14 *Mar 1 06:25:57.116: Se1/2 LCP: AuthProto PAP (0x0304C023) *Mar 1 06:25:57.116: Se1/2 LCP: MagicNumber 0x13E0E824 (0x050613E0E824) *Mar 1 06:25:57.116: Se1/2 IPCP: Rem R3# R3#ove route to 180.40.7.2 *Mar 1 06:25:57.124: Se1/2 LCP: I CONFACK [ACKsent] id 3 len 14 *Mar 1 06:25:57.124: Se1/2 LCP: AuthProto PAP (0x0304C023) *Mar 1 06:25:57.124: Se1/2 LCP: MagicNumber 0x13E0EF75 (0x050613E0EF75) *Mar 1 06:25:57.124: Se1/2 LCP: State is Open *Mar 1 06:25:57.124: Se1/2 PPP: Phase is AUTHENTICATING, by both *Mar 1 06:25:57.124: Se1/2 PAP: Using hostname from interface PAP *Mar 1 06:25:57.124: Se1/2 PAP: Using password from interface PAP *Mar 1 06:25:57.124: Se1/2 PAP: O AUTH-REQ id 2 len 21 from "Two" *Mar 1 06:25:57.128: Se1/2 PAP: I AUTH-REQ id 3 len 22 from "One" *Mar 1 06:25:57.128: Se1/2 PAP: Authenticating peer One *Mar 1 06:25:57.128: Se1/2 PPP: Phase is FORWARDING, Attempting Forward *Mar 1 06:25:57.132: Se1/2 PPP: Phase is AUTHENTICATING, Unauthenticated User *Mar 1 06:25:57.132: Se1/2 PPP: Sent PAP LOGIN Request *Mar 1 06:25:57.132: Se1/2 PPP: Received LOGIN Response PASS *Mar 1 06:25:57.132: Se1/2 PPP: Phase is FORWARDING, Attempting Forward *Mar 1 06:25:57.136: Se1/2 PPP: Phase is AUTHENTICATING, Authenticated User *Mar 1 06:25:57.136: Se1/2 PPP: Sent LCP AUTHOR Request *Mar 1 06:25:57.136: Se1/2 LCP: Received AAA AUTHOR Response PASS *Mar 1 06:25:57.136: Se1/2 PAP: O AUTH-ACK id 3 len 5 *Mar 1 06:25:57.140: Se1/2 PAP: I AUTH-ACK id 2 len 5 *Mar 1 06:25:57.140: Se1/2 PPP: Phase is UP *Mar 1 06:25:57.140: Se1/2 IPCP: O CONFREQ [Closed] id 1 len 10 *Mar 1 06:25:57.140: Se1/2 IPCP: Address 180.40.7.3 (0x0306B4280703) *Mar 1 06:25:57.140: Se1/2 CDPCP: O CONFREQ [Closed] id 1 len 4 *Mar 1 06:25:57.144: Se1/2 PPP: Process pending packets *Mar 1 06:25:57.144: Se1/2 IPCP: I CONFREQ [REQsent] id 1 len 10 *Mar 1 06:25:57.144: Se1/2 IPCP: Address 180.40.7.2 (0x0306B4280702) *Mar 1 06:25:57.144: Se1/2 AAA/AUTHOR/IPCP: Start. Her address 180.40.7.2, we want 0.0.0.0 *Mar 1 06:25:57.148: Se1/2 AAA/AUTHOR/IPCP: Reject 180.40.7.2, using 0.0.0.0 *Mar 1 06:25:57.148: Se1/2 AAA/AUTHOR/IPCP: Done. Her address 180.40.7.2, we want 0.0.0.0 *Mar 1 06:25:57.148: Se1/2 IPCP: O CONFACK [REQsent] id 1 len 10 *Mar 1 06:25:57.148: Se1/2 IPCP: Address 180.40.7.2 (0x0306B4280702) *Mar 1 06:25:57.148: Se1/2 IPCP: I CONFACK [ACKsent] id 1 len 10 *Mar 1 06:25:57.148: Se1/2 IPCP: Address 180.40.7.3 (0x0306B4280703) *Mar 1 06:25:57.152: Se1/2 IPCP: State is Open *Mar 1 06:25:57.152: Se1/2 CDPCP: I CONFREQ [REQsent] id 1 len 4 *Mar 1 06:25:57.152: Se1/2 CDPCP: O CONFACK [REQsent] id 1 len 4 *Mar 1 06:25:57.152: Se1/2 CDPCP: I CONFACK [ACKsent] id 1 len 4 *Mar 1 06:25:57.152: Se1/2 CDPCP: State is Open *Mar 1 06:25:57.156: Se1/2 IPCP: Install route to 180.40.7.2 *Mar 1 06:25:57.156: Se1/2 IPCP: Add link info for cef entry 180.40.7.2 R3# R3# RACK98AS>2 [Resuming connection 2 to r2 ... ] R2(config-if)# ppp authen pap op R2(config-if)#^Z R2#sh *Mar 1 06:27:01.534: %SYS-5-CONFIG_I: Configured from console by console R2#sh run int      Building configuration... Current configuration : 1610 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R2 ! logging queue-limit 100 logging buffered 4096 debugging ! username Two password 0 For-The-Show ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 mpls ldp logging neighbor-changes ! --More--  ! ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! interface FastEthernet0/0 no ip address shutdown --More--   duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 208.28.1.129 255.255.255.224 duplex auto speed auto ! interface Serial1/0 no ip address encapsulation frame-relay no fair-queue ! interface Serial1/0.1 multipoint ip address 208.28.1.3 255.255.255.248 frame-relay map ip 208.28.1.1 203 frame-relay interface-dlci 203 ! interface Serial1/1 --More--   no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 encapsulation ppp clockrate 64000 ppp authentication pap optional ppp pap sent-username One password 0 For-The-Money ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 --More--   no ip address shutdown ! interface Serial1/7 no ip address shutdown ! ip http server no ip http secure-server ip classless ! ! ! ! ! call rsvp-sync ! ! mgcp profile default ! ! ! dial-peer cor custom --More--  ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 ! ! end R2# RACK98AS>3 [Resuming connection 3 to r3 ... ] R3#sh un  run Building configuration... Current configuration : 1555 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! logging queue-limit 100 ! username One password 0 For-The-Money ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 mpls ldp logging neighbor-changes ! ! --More--  ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! interface FastEthernet0/0 ip address 17.80.1.1 255.255.255.0 duplex auto speed auto --More--  ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay ip split-horizon no fair-queue frame-relay map ip 208.28.1.1 301 frame-relay map ip 208.28.1.3 302 no frame-relay inverse-arp ! interface Serial1/1 no ip address shutdown --More--  ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 encapsulation ppp ppp authentication pap optional ppp pap sent-username Two password 0 For-The-Show ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! --More--  interface Serial1/7 no ip address shutdown ! ip http server no ip http secure-server ip classless ! ! ! ! ! call rsvp-sync ! ! mgcp profile default ! ! ! dial-peer cor custom ! ! ! --More--  ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 ! ! end R3# R3# RACK98AS>1 [Resuming connection 1 to r1 ... ] R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int s 0/0.1 R1(config-subif)#do sh run int s 0/0.1 Building configuration... Current configuration : 118 bytes ! interface Serial0/0.1 point-to-point ip address 208.28.1.1 255.255.255.248 frame-relay interface-dlci 103 end R1(config-subif)# frame-relay interface-dlci 103 ? cisco Use CISCO Encapsulation ietf Use RFC1490/RFC2427 Encapsulation ppp Use RFC1973 Encapsulation to support PPP over FR protocol Optional protocol information for remote end R1(config-subif)# frame-relay interface-dlci 103 ppp ? Virtual-Template Virtual Template interface R1(config-subif)# frame-relay interface-dlci 103 ppp vi R1(config-subif)# frame-relay interface-dlci 103 ppp virtual-Template ? <1-200> Virtual-Template interface number R1(config-subif)# frame-relay interface-dlci 103 ppp virtual-Template 1 ? R1(config-subif)# frame-relay interface-dlci 103 ppp virtual-Template 1 %PVC is already defined R1(config-fr-dlci)#no frame-relay interface-dlci 103 R1(config-subif)#no frame-relay interface-dlci 103 frame-relay interface-dlci 103 ppp virtual-Template 1 R1(config-fr-dlci)# *Mar 1 06:32:30.854: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to up R1(config-fr-dlci)#exit R1(config-subif)#exit R1(config)#int vi R1(config)#int vi R1(config)#int vir R1(config)#int virtual-t R1(config)#int virtual-te R1(config)#int virtual-template 1 R1(config-if)#enc R1(config-if)#encapsulation ppp R1(config-if)#ppp authen chap R1(config-if)#ip address            do sh ip int brie Interface IP-Address OK? Method Status Protocol Ethernet0/0 208.28.1.66 YES manual up up Serial0/0 unassigned YES manual up up Serial0/0.1 208.28.1.1 YES manual up up Ethernet0/1 17.57.100.1 YES manual up up Serial0/1 unassigned YES unset administratively down down Virtual-Access1 unassigned YES unset up up Virtual-Template1 unassigned YES unset down down Virtual-Access2 unassigned YES unset up down Virtual-Access3 unassigned YES unset down down R1(config-if)#ip address 28.2   08.28.1.1 255.255.255.248 R1(config-if)#int s 0/0.1 R1(config-subif)#no ip address R1(config-subif)#exit R1(config)#su  user R3 pass PinkCadil; li ac R1(config)#^Z R1# *Mar 1 06:35:18.525: %SYS-5-CONFIG_I: Configured from console by console R1# RACK98AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s 1/0 R3(config-if)#fram m in R3(config-if)#fram in  map          do sh   run int s 1/0 Building configuration... Current configuration : 224 bytes ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay ip split-horizon no fair-queue frame-relay map ip 208.28.1.1 301 frame-relay map ip 208.28.1.3 302 no frame-relay inverse-arp end R3(config-if)#frame-relay map ip 208.28.1.1 301 ? broadcast Broadcasts should be forwarded to this address cisco Use CISCO Encapsulation compress Enable TCP/IP and RTP/IP header compression ietf Use RFC1490/RFC2427 Encapsulation nocompress Do not compress TCP/IP headers payload-compression Use payload compression rtp RTP header compression parameters tcp TCP header compression parameters R3(config-if)#frame-relay map ip 208.28.1.1 301                       int R3(config-if)#frame-relay inter R3(config-if)#frame-relay interface-d R3(config-if)#frame-relay interface-dlci ? <16-1007> Define a switched or locally terminated DLCI R3(config-if)#frame-relay interface-dlci 301 ? ppp Use RFC1973 Encapsulation to support PPP over FR switched Define a switched DLCI R3(config-if)#frame-relay interface-dlci 301 ppp vi R3(config-if)#frame-relay interface-dlci 301 ppp virtual-Template 1 R3(config-fr-dlci)# *Mar 1 06:35:48.430: Vt1 PPP: Phase is DOWN, Setup *Mar 1 06:35:48.434: Vi2 PPP: Phase is DOWN, Setup *Mar 1 06:35:48.434: Vi2 PPP: Using default call direction *Mar 1 06:35:48.434: Vi2 PPP: Treating connection as a dedicated line *Mar 1 06:35:48.434: Vi2 PPP: Phase is ESTABLISHING, Active Open *Mar 1 06:35:48.434: Vi2 PPP: Authorization required *Mar 1 06:35:48.434: Vi2 LCP: O CONFREQ [Closed] id 1 len 10 *Mar 1 06:35:48.434: Vi2 LCP: MagicNumber 0x13E9F54F (0x050613E9F54F) *Mar 1 06:35:48.438: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to up *Mar 1 06:35:48.450: Vi2 LCP: I CONFREQ [REQsent] id 51 len 15 *Mar 1 06:35:48.450: Vi2 LCP: AuthProto CHAP (0x0305C22305) *Mar 1 06:35:48.450: Vi2 LCP: MagicNumber 0x03019073 (0x050603019073) *Mar 1 06:35:48.450: Vi2 LCP: O CONFACK [REQsent] id 51 len 15 *Mar 1 06:35:48.454: Vi2 LCP: AuthProto CHAP (0x0305C22305) *Mar 1 06:35:48.454: Vi2 LCP: MagicNumber 0x03019073 (0x050603019073) *M R3(config-fr-dar 1 06:35:48.454: Vi2 LCP: I CONFACK [ACKsent] id 1 len 10 *Mar 1 06:35:48.454: Vi2 LCP: MagicNumber 0x13E9F54F (0x050613E9F54F) *Mar 1 06:35:48.454: Vi2 LCP: State is Open *Mar 1 06:35:48.454: Vi2 PPP: No authorization without authentication *Mar 1 06:35:48.454: Vi2 PPP: Phase is AUTHENTICATING, by the peer *Mar 1 06:35:48.470: Vi2 CHAP: I CHALLENGE id 1 len 23 from "R1" *Mar 1 06:35:48.474: Vi2 CHAP: Unable to authenticate for peer *Mar 1 06:35:48.474: Vi2 PPP: Sending Acct Event[Down] id[5] *Mar 1 06:35:48.474: Vi2 PPP: Phase is TERMINATING *Mar 1 06:35:48.474: Vi2 LCP: O TERMREQ [Open] id 2 len 4lci)# R3(config-fr-dlci)# *Mar 1 06:35:50.469: Vi2 LCP: TIMEout: State TERMsent *Mar 1 06:35:50.469: Vi2 LCP: O TERMREQ [TERMsent] id 3 len 4 R3(config-fr-dlci)# *Mar 1 06:35:52.488: Vi2 LCP: TIMEout: State TERMsent *Mar 1 06:35:52.488: Vi2 LCP: State is Closed *Mar 1 06:35:52.488: Vi2 PPP: Phase is DOWN *Mar 1 06:35:52.488: Vi2 PPP: Phase is ESTABLISHING, Passive Open *Mar 1 06:35:52.488: Vi2 LCP: State is Listen R3(config-fr-dlci)#do u *Mar 1 06:35:54.504: Vi2 LCP: TIMEout: State Listen *Mar 1 06:35:54.504: Vi2 PPP: Authorization required *Mar 1 06:35:54.504: Vi2 LCP: O CONFREQ [Listen] id 4 len 10 *Mar 1 06:35:54.504: Vi2 LCP: MagicNumber 0x13EA0D06 (0x050613EA0D06) *Mar 1 06:35:54.516: Vi2 LCP: I CONFACK [REQsent] id 4 len 10 *Mar 1 06:35:54.520: Vi2 LCP: MagicNumber 0x13EA0D06 (0x050613EA0D06) *Mar 1 06:35:54.536: Vi2 LCP: I CONFREQ [ACKrcvd] id 53 len 15 *Mar 1 06:35:54.536: Vi2 LCP: AuthProto CHAP (0x0305C22305) *Mar 1 06:35:54.536: Vi2 LCP: MagicNumber 0x0301A05A (0x05060301A05A) *Mar 1 06:35:54.536: Vi2 LCP: O CONFACK [ACKrcvd] id 53 len 15 *Mar 1 06:35:54.536: Vi2 LCP: AuthProto CHAP (0x0305C22305) *Mar 1 06:35:54.540: Vi2 LCP: MagicNumber 0x0301A05A (0x05060301A05A) *Mar 1 06:35:54.540: Vi2 LCP: State is Open *Mar 1 06:35:54.540: Vi2 PPP: No authorization without authentication *Mar 1 06:35:54.540: Vi2 PPP: Phase is AUTHENTICATING, by the peer *Mar 1 06:35:54.556: Vi2 CHAP: I CHALLENGE id 2 len 23 from "R1" *Mar 1 06:35:54.560: Vi2 CHAP: Unable to authenticate for peer *Mar 1 06:35:54.560: Vi2 PPP: Phase is TERMINATING *Mar 1 06:35:54.560: Vi2 LCP: O TERMREQ [Open] id 5 len 4 *Mar 1 06:35:54.572: Vi2 LCP: I TERMACK [TERMsent] id 5 len 4 *Mar 1 06:35:54.572: Vi2 LCP: State is Closed *Mar 1 06:35:54.572: Vi2 PPP: Phase is DOWN *Mar 1 06:35:54.572: Vi2 PPP: Phase is ESTABLISHING, Passive Open *Mar 1 06:35:54.572: Vi2 LCP: State is Listen R3(config-fr-dlci)#do u all All possible debugging has been turned off R3(config-fr-dlci)# *Mar 1 06:35:56.583: Vi2 LCP: TIMEout: State Listen *Mar 1 06:35:56.583: Vi2 PPP: Authorization required *Mar 1 06:35:56.583: Vi2 LCP: O CONFREQ [Listen] id 6 len 10 *Mar 1 06:35:56.583: Vi2 LCP: MagicNumber 0x13EA1527 (0x050613EA1527) *Mar 1 06:35:56.599: Vi2 LCP: I CONFREQ [REQsent] id 54 len 15 *Mar 1 06:35:56.599: Vi2 LCP: AuthProto CHAP (0x0305C22305) *Mar 1 06:35:56.599: Vi2 LCP: MagicNumber 0x0301B04B (0x05060301B04B) *Mar 1 06:35:56.599: Vi2 LCP: O CONFACK [REQsent] id 54 len 15 *Mar 1 06:35:56.599: Vi2 LCP: AuthProto CHAP (0x0305C22305) *Mar 1 06:35:56.603: Vi2 LCP: MagicNumber 0x0301B04B (0x05060301B04B) *Mar 1 06:35:56.603: Vi2 LCP: I CONFACK [ACKsent] id 6 len 10 *Mar 1 06:35:56.603: Vi2 LCP: MagicNumber 0x13EA1527 (0x050613EA1527) *Mar 1 06:35:56.603: Vi2 LCP: State is Open *Mar 1 06:35:56.603: Vi2 PPP: No authorization without authentication *Mar 1 06:35:56.603: Vi2 PPP: Phase is AUTHENTICATING, by the peer *Mar 1 06:35:56.619: Vi2 CHAP: I CHALLENGE id 3 len 23 from "R1" *Mar 1 06:35:56.623: Vi2 CHAP: Unable to authenticate for peer *Mar 1 06:35:56.623: Vi2 PPP: Sending Acct Event[Down] id[7] *Mar 1 06:35:56.623: Vi2 PPP: Phase is TERMINATING *Mar 1 06:35:56.623: Vi2 LCP: O TERMREQ [Open] id 7 len 4 *Mar 1 06:35:56.635: Vi2 LCP: I TERMACK [TERMsent] id 7 len 4 *Mar 1 06:35:56.635: Vi2 LCP: State is Closed *Mar 1 06:35:56.635: Vi2 PPP: Phase is DOWN *Mar 1 06:35:56.635: Vi2 PPP: Phase is ESTABLISHING, Passive Open *Mar 1 06:35:56.635: Vi2 LCP: State is Listen R3(config-fr-dlci)# R3(config-fr-dlci)#int     exit R3(config-if)#exit R3(config)#int vir R3(config)#int virtual-temp R3(config)#int virtual-template 1 R3(config-if)#ip un R3(config-if)#ip unn R3(config-if)#ip unnumbered s 1/0 R3(config-if)#ppp     encap pp R3(config-if)#do sh run Building configuration... Current configuration : 1664 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! logging queue-limit 100 ! username One password 0 For-The-Money ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 mpls ldp logging neighbor-changes ! ! --More--  ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! interface FastEthernet0/0 ip address 17.80.1.1 255.255.255.0 duplex auto speed auto --More--  ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay ip split-horizon no fair-queue frame-relay map ip 208.28.1.1 301 frame-relay map ip 208.28.1.3 302 frame-relay interface-dlci 301 ppp Virtual-Template1 no frame-relay inverse-arp ! interface Serial1/1 no ip address --More--   shutdown ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 encapsulation ppp ppp authentication pap optional ppp pap sent-username Two password 0 For-The-Show ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown --More--  ! interface Serial1/7 no ip address shutdown ! interface Virtual-Template1 ip unnumbered Serial1/0 ! ip http server no ip http secure-server ip classless ! ! ! ! ! call rsvp-sync ! ! mgcp profile default ! ! ! --More--   R3(config-if)#ppp authen chap R3(config-if)#exit R3(config)#user R1 pas PinkCadillac R3(config)# *Mar 1 06:39:52.358: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to up R3(config)#int  user R1 pas PinkCadillacexit ppp authen chapdo sh run encap pp ip unnumbered s 1/0nt virtual-template 1 R3(config-if)#shut % Shutdown not allowed on virtual template interface. R3(config-if)#int s 1/0 R3(config-if)#shut R3(config-if)#do *Mar 1 06:40:18.356: %LINK-5-CHANGED: Interface Serial1/0, changed state to administratively down R3(config-if)#do deb *Mar 1 06:40:18.360: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to down R3(config-if)#do deb p *Mar 1 06:40:19.358: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to down *Mar 1 06:40:19.362: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to down R3(config-if)#do deb ppp ne  authen PPP authentication debugging is on R3(config-if)#no shut R3(config-if)#^Z R3# *Mar 1 06:40:30.188: %SYS-5-CONFIG_I: Configured from console by console *Mar 1 06:40:31.361: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up *Mar 1 06:40:31.365: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to up R3# *Mar 1 06:40:31.365: Vi2 PPP: Using default call direction *Mar 1 06:40:31.365: Vi2 PPP: Treating connection as a dedicated line *Mar 1 06:40:31.365: Vi2 PPP: Authorization required R3# *Mar 1 06:40:32.363: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up *Mar 1 06:40:33.389: Vi2 CHAP: O CHALLENGE id 8 len 23 from "R3" *Mar 1 06:40:33.393: Vi2 CHAP: I CHALLENGE id 108 len 23 from "R1" *Mar 1 06:40:33.397: Vi2 CHAP: Using hostname from unknown source *Mar 1 06:40:33.397: Vi2 CHAP: Using password from AAA *Mar 1 06:40:33.397: Vi2 CHAP: O RESPONSE id 108 len 23 from "R3" *Mar 1 06:40:33.413: Vi2 CHAP: I RESPONSE id 8 len 23 from "R1" *Mar 1 06:40:33.417: Vi2 PPP: Sent CHAP LOGIN Request *Mar 1 06:40:33.417: Vi2 PPP: Received LOGIN Response PASS *Mar 1 06:40:33.417: Vi2 PPP: Sent LCP AUTHOR Request *Mar 1 06:40:33.421: Vi2 LCP: Received AAA AUTHOR Response PASS *Mar 1 06:40:33.421: Vi2 CHAP: O SUCCESS id 8 len 4 R3# *Mar 1 06:40:33.421: Vi2 CHAP: I SUCCESS id 108 len 4 *Mar 1 06:40:34.426: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to up R3# *Mar 1 06:40:52.324: Vi2 PPP: Authorization required *Mar 1 06:40:53.325: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to down R3# RACK98AS>11  [Resuming connection 1 to r1 ... ] * R1#sh run\ ^ % Invalid input detected at '^' marker. R1#sh run\config t sh run\  Building configuration... Current configuration : 1078 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! logging queue-limit 100 ! username R3 password 0 PinkCadillac memory-size iomem 10 ip subnet-zero ! ! no ip domain lookup ! mpls ldp logging neighbor-changes ! ! ! --More--   R1#de  ping 208.28.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.2, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 56/59/60 ms R1# *Mar 1 06:42:20.124: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to up R1# R1# R1# R1# R1#ping 208.28.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/69/89 ms R1# RACK98AS>3 [Resuming connection 3 to r3 ... ] * R3#config tsh run  Building configuration... Current configuration : 1725 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! logging queue-limit 100 ! username One password 0 For-The-Money username R1 password 0 PinkCadillac ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 mpls ldp logging neighbor-changes ! --More--  ! ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! interface FastEthernet0/0 ip address 17.80.1.1 255.255.255.0 duplex auto --More--   R3#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 17.80.1.1 YES manual up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 208.28.1.2 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.3 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--  Serial1/6 unassigned YES unset administratively down down Serial1/7 unassigned YES unset administratively down down Virtual-Access1 unassigned YES unset up up Virtual-Template1 208.28.1.2 YES TFTP down down Virtual-Access2 208.28.1.2 YES TFTP up up Virtual-Access3 unassigned YES unset down down R3# R3#ping 208.28.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.3, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) R3#sh i   fram map Serial1/0 (up): ip 208.28.1.1 dlci 301(0x12D,0x48D0), static, CISCO, status defined, active Serial1/0 (up): ip 208.28.1.3 dlci 302(0x12E,0x48E0), static, CISCO, status defined, active R3#ship     fram pvc PVC Statistics for interface Serial1/0 (Frame Relay DTE) Active Inactive Deleted Static Local 2 0 0 0 Switched 0 0 0 0 Unused 0 1 0 0 DLCI = 301, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0 input pkts 832 output pkts 443 in bytes 154480 out bytes 9115 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 2 out bcast bytes 68 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 06:43:45, last time pvc status changed 00:03:55 Bound to Virtual-Access2 (up, cloned from Virtual-Template1) --More--   DLCI = 302, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0 input pkts 11 output pkts 32 in bytes 1074 out bytes 3214 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 1 out bcast bytes 34 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 06:43:50, last time pvc status changed 00:04:00 --More--   R3#sh run Building configuration... Current configuration : 1725 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! logging queue-limit 100 ! username One password 0 For-The-Money username R1 password 0 PinkCadillac ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 mpls ldp logging neighbor-changes ! --More--  ! ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! interface FastEthernet0/0 ip address 17.80.1.1 255.255.255.0 duplex auto --More--   speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay ip split-horizon no fair-queue frame-relay map ip 208.28.1.1 301 frame-relay map ip 208.28.1.3 302 frame-relay interface-dlci 301 ppp Virtual-Template1 no frame-relay inverse-arp ! interface Serial1/1 --More--   R3# RACK98AS>2 [Resuming connection 2 to r2 ... ] R2#sh far  ram map Serial1/0.1 (up): ip 208.28.1.1 dlci 203(0xCB,0x30B0), static, CISCO, status defined, active R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0.1 R2(config-subif)#fram map ip 208.280.  .1.2 203 R2(config-subif)#^Z R2# RACK98AS>3 [Resuming connection 3 to r3 ... ] R3#sh runfram pvcmapping 208.28.1.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/58/61 ms R3# R3# R3# R3# R3# R3# RACK98AS>1 [Resuming connection 1 to r1 ... ] R1#ping 208.28.1.2 3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 116/131/144 ms R1# R1# R1# R1#sh run Building configuration... Current configuration : 1078 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! logging queue-limit 100 ! username R3 password 0 PinkCadillac memory-size iomem 10 ip subnet-zero ! ! no ip domain lookup ! mpls ldp logging neighbor-changes ! ! ! --More--  ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! interface Ethernet0/0 ip address 208.28.1.66 255.255.255.240 half-duplex ! interface Serial0/0 no ip address encapsulation frame-relay no fair-queue --More--  ! interface Serial0/0.1 point-to-point frame-relay interface-dlci 103 ppp Virtual-Template1 ! interface Ethernet0/1 ip address 17.57.100.1 255.255.255.0 half-duplex ! interface Serial0/1 no ip address shutdown ! interface Virtual-Template1 ip address 208.28.1.1 255.255.255.248 ppp authentication chap ! ip http server ip classless ! ! ! ! ! --More--  call rsvp-sync ! ! mgcp profile default ! dial-peer cor custom ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 ! ! end R1# RACK98AS>c 3 [Resuming connection 3 to r3 ... ] R3#sh rn un Building configuration... Current configuration : 1725 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! logging queue-limit 100 ! username One password 0 For-The-Money username R1 password 0 PinkCadillac ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 mpls ldp logging neighbor-changes ! --More--  ! ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! interface FastEthernet0/0 ip address 17.80.1.1 255.255.255.0 duplex auto --More--   speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay ip split-horizon no fair-queue frame-relay map ip 208.28.1.1 301 frame-relay map ip 208.28.1.3 302 frame-relay interface-dlci 301 ppp Virtual-Template1 no frame-relay inverse-arp ! interface Serial1/1 --More--   no ip address shutdown ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 encapsulation ppp ppp authentication pap optional ppp pap sent-username Two password 0 For-The-Show ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address --More--   shutdown ! interface Serial1/7 no ip address shutdown ! interface Virtual-Template1 ip unnumbered Serial1/0 ppp authentication chap ! ip http server no ip http secure-server ip classless ! ! ! ! ! call rsvp-sync ! ! mgcp profile default ! --More--  ! ! dial-peer cor custom ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 ! ! end R3# R3#confi gt ^ % Invalid input detected at '^' marker. R3#in  confi gt ^ % Invalid input detected at '^' marker. R3#confi gt  t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s 1/2 R3(config-if)#ppp ? accm Set initial Async Control Character Map accounting Set PPP network accounting method acfc Options for HDLC Address & Control Field Compression authentication Set PPP link authentication method authorization Set PPP network authorization method bridge Enable PPP bridge translation caller Caller option when no CLID is available chap Set CHAP authentication parameters direction Override default PPP direction dnis Authentication via DNIS before LCP eap Set EAP authentication parameters encrypt Enable PPP encryption ipcp Set IPCP negotiation options iphc Set IPCP Header Compression control options lcp PPP LCP configuration legacy-forward Use the legacy PPP Forwarder for forwarding link Set miscellaneous link parameters loopback PPP loopback options max-bad-auth Allow multiple authentication failures max-configure Number of conf-reqs sent before assuming peer is unable to respond max-failure Number of conf-naks sent before assuming configuration is not --More--   converging max-terminate Number of term-reqs sent before assuming peer is unable to respond ms-chap Set MS-CHAP authentication parameters ms-chap-v2 Set MS-CHAP-V2 authentication parameters multilink Make interface multilink capable pap Set PAP authentication parameters pfc Options for Protocol Field Compression quality Set minimum Link Quality before link is down reliable-link Use LAPB with PPP to provide a reliable link timeout Set PPP timeout parameters R3(config-if)#ppp     do sh deb PPP: PPP authentication debugging is on R3(config-if)#do u all All possible debugging has been turned off R3(config-if)#do deb pp neo deb pp neo ^ % Invalid input detected at '^' marker. R3(config-if)# do deb pp neo g PPP protocol negotiation debugging is on R3(config-if)#shut[  R3(config-if)#ppp *Mar 1 06:49:59.893: %LINK-5-CHANGED: Interface Serial1/2, changed state to administratively down R3(config-if)#ppp re R3(config-if)#ppp reliable-link *Mar 1 06:49:59.893: Se1/2 PPP: Sending Acct Event[Down] id[4] *Mar 1 06:49:59.893: Se1/2 CDPCP: State is Closed *Mar 1 06:49:59.893: Se1/2 IPCP: Remove link info for cef entry 180.40.7.2 *Mar 1 06:49:59.893: Se1/2 IPCP: State is Closed *Mar 1 06:49:59.893: Se1/2 PPP: Phase is TERMINATING *Mar 1 06:49:59.897: Se1/2 LCP: State is Closed *Mar 1 06:49:59.897: Se1/2 PPP: Phase is DOWN *Mar 1 06:49:59.897: Se1/2 IPCP: Remove route to 180.40.7.2 *Mar 1 06:50:00.907: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to down R3(config-if)#ppp reliable-link R3(config-if)# RACK98AS>2 [Resuming connection 2 to r2 ... ] * R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/2 R2(config-if)#ppp reliable-link R2(config-if)#^Z R2#^x3 % Unknown command or computer name, or unable to find computer address R2# R2# *Mar 1 06:50:16.881: %SYS-5-CONFIG_I: Configured from console by console R2# RACK98AS>3 [Resuming connection 3 to r3 ... ] R3(config-if)#no shut R3(config-if)# *Mar 1 06:50:21.737: Se1/2 PPP: Outbound cdp packet dropped, line protocol not up *Mar 1 06:50:21.761: Se1/2 PPP: Outbound cdp packet dropped, line protocol not up *Mar 1 06:50:21.785: Se1/2 PPP: Outbound cdp packet dropped, line protocol not up R3(config-if)# *Mar 1 06:50:23.716: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up *Mar 1 06:50:23.716: Se1/2 PPP: Using default call direction *Mar 1 06:50:23.716: Se1/2 PPP: Treating connection as a dedicated line *Mar 1 06:50:23.716: Se1/2 PPP: Phase is ESTABLISHING, Active Open *Mar 1 06:50:23.716: Se1/2 LCP: O CONFREQ [Closed] id 4 len 18 *Mar 1 06:50:23.716: Se1/2 LCP: AuthProto PAP (0x0304C023) *Mar 1 06:50:23.716: Se1/2 LCP: MagicNumber 0x13F750D4 (0x050613F750D4) *Mar 1 06:50:23.720: Se1/2 LCP: ReliableLink window 7 addr 0 (0x0B040700) *Mar 1 06:50:23.724: Se1/2 LCP: I CONFREQ [REQsent] id 4 len 18 *Mar 1 06:50:23.724: Se1/2 LCP: AuthProto PAP (0x0304C023) *Mar 1 06:50:23.724: Se1/2 LCP: MagicNumber 0x13F7492D (0x050613F7492D) *Mar 1 06:50:23.724: Se1/2 LCP: ReliableLink window 7 addr 0 (0x0B040700) *Mar 1 06:50:23.724: Se1/2 LCP: O CONFNAK [REQsent] id 4 len 8 *Mar 1 06:50:23.724: Se1/2 LCP: ReliableLink window 7 addr 1 (0x0B040701) *Mar 1 06:50:23.728: Se1/2 LCP: I CONFNAK [REQsent] id 4 len 8 *Mar 1 06:50:23.728: Se1/2 LCP: ReliableLink window 7 addr 3 (0x0B040703) *Mar 1 06:50:23.728: Se1/2 LCP: O CONFREQ [REQsent] id 5 len 18 *Mar 1 06:50:23.728: Se1/2 LCP: AuthProto PAP (0x0304C023) *Mar 1 06:50:23.728: Se1/2 LCP: MagicNumber 0x13F750D4 (0x050613F750D4) *Mar 1 06:50:23.728: Se1/2 LCP: ReliableLink window 7 addr 3 (0x0B040703) *Mar 1 06:50:23.733: Se1/2 LCP: I CONFREQ [REQsent] id 5 len 18 *Mar 1 06:50:23.737: Se1/2 LCP: AuthProto PAP (0x0304C023) *Mar 1 06:50:23.737: Se1/2 LCP: MagicNumber 0x13F7492D (0x050613F7492D) *Mar 1 06:50:23.737: Se1/2 LCP: ReliableLink window 7 addr 1 (0x0B040701) *Mar 1 06:50:23.737: Se1/2 LCP: O CONFACK [REQsent] id 5 len 18 *Mar 1 06:50:23.737: Se1/2 LCP: AuthProto PAP (0x0304C023) *Mar 1 06:50:23.737: Se1/2 LCP: MagicNumber 0x13F7492D (0x050613F7492D) *Mar 1 06:50:23.737: Se1/2 LCP: ReliableLink window 7 addr 1 (0x0B040701) *Mar 1 06:50:23.741: Se1/2 LCP: I CONFACK [ACKsent] id 5 len 18 *Mar 1 06:50:23.741: Se1/2 LCP: AuthProto PAP (0x0304C023) *Mar 1 06:50:23.741: Se1/2 LCP: MagicNumber 0x13F750D4 (0x050613F750D4) *Mar 1 06:50:23.741: Se1/2 LCP: ReliableLink window 7 addr 3 (0x0B040703) *Mar 1 06:50:23.741: Se1/2 LCP: State is Open *Mar 1 06:50:23.745: Se1/2 PPP: Phase is AUTHENTICATING, by both *Mar 1 06:50:23.745: Se1/2 PAP: Using hostname from interface PAP *Mar 1 06:50:23.745: Se1/2 PAP: Using password from interface PAP *Mar 1 06:50:23.745: Se1/2 PAP: O AUTH-REQ id 3 len 21 from "Two" R3(config-if)# R3(config-if)# *Mar 1 06:50:29.794: Se1/2 PPP: Outbound cdp packet dropped, line protocol not up R3(config-if)# *Mar 1 06:50:32.892: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up *Mar 1 06:50:33.733: Se1/2 AUTH: Timeout 1 *Mar 1 06:50:33.733: Se1/2 PAP: Using hostname from interface PAP *Mar 1 06:50:33.733: Se1/2 PAP: Using password from interface PAP *Mar 1 06:50:33.733: Se1/2 PAP: O AUTH-REQ id 4 len 21 from "Two" *Mar 1 06:50:33.745: Se1/2 PAP: I AUTH-ACK id 4 len 5 *Mar 1 06:50:33.761: Se1/2 PAP: I AUTH-REQ id 5 len 22 from "One" *Mar 1 06:50:33.765: Se1/2 PAP: Authenticating peer One *Mar 1 06:50:33.765: Se1/2 PPP: Phase is FORWARDING, Attempting Forward *Mar 1 06:50:33.765: Se1/2 PPP: Phase is AUTHENTICATING, Unauthenticated User *Mar 1 06:50:33.769: Se1/2 PPP: Phase is FORWARDING, Attempting Forward *Mar 1 06:50:33.769: Se1/2 PPP: Phase is AUTHENTICATING, Authenticated User *Mar 1 06:50:33.773: Se1/2 PAP: O AUTH-ACK id 5 len 5 *Mar 1 06:50:33.773: Se1/2 PPP: Phase is UP *Mar 1 06:50:33.773: Se1/2 IPCP: O CONFREQ [Closed] id R3(config-if)#1 len 10 *Mar 1 06:50:33.773: Se1/2 IPCP: Address 180.40.7.3 (0x0306B4280703) *Mar 1 06:50:33.773: Se1/2 CDPCP: O CONFREQ [Closed] id 1 len 4 *Mar 1 06:50:33.777: Se1/2 PPP: Process pending packets *Mar 1 06:50:33.777: Se1/2 IPCP: I CONFREQ [REQsent] id 1 len 10 *Mar 1 06:50:33.781: Se1/2 IPCP: Address 180.40.7.2 (0x0306B4280702) *Mar 1 06:50:33.781: Se1/2 AAA/AUTHOR/IPCP: Start. Her address 180.40.7.2, we want 0.0.0.0 *Mar 1 06:50:33.781: Se1/2 AAA/AUTHOR/IPCP: Reject 180.40.7.2, using 0.0.0.0 *Mar 1 06:50:33.781: Se1/2 AAA/AUTHOR/IPCP: Done. Her address 180.40.7.2, we want 0.0.0.0 *Mar 1 06:50:33.781: Se1/2 IPCP: O CONFACK [REQsent] id 1 len 10 *Mar 1 06:50:33.781: Se1/2 IPCP: Address 180.40.7.2 (0x0306B4280702) *Mar 1 06:50:33.785: Se1/2 IPCP: I CONFACK [ACKsent] id 1 len 10 *Mar 1 06:50:33.785: Se1/2 IPCP: Address 180.40.7.3 (0x0306B4280703) *Mar 1 06:50:33.785: Se1/2 IPCP: State is Open *Mar 1 06:50:33.785: Se1/2 CDPCP: I CONFREQ [REQsent] id 1 len 4 *Mar 1 06:50:33.785: Se1/2 CDPCP: O CONFACK [REQsent] id 1 len 4 *Mar 1 06:50:33.785: Se1/2 CDPCP: I CONFACK [ACKsent] id 1 len 4 *Mar 1 06:50:33.789: Se1/2 CDPCP: State is Open *Mar 1 06:50:33.789: Se1/2 IPCP: Install route to 180.40.7.2 *Mar 1 06:50:33.789: Se1/2 IPCP: Add link info for cef entry 180.40.7.2 R3(config-if)# R3(config-if)#^Z R3# *Mar 1 06:51:53.107: %SYS-5-CONFIG_I: Configured from console by console R3#u all All possible debugging has been turned off R3#sh run int s 1/2 Building configuration... Current configuration : 188 bytes ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 encapsulation ppp ppp reliable-link ppp authentication pap optional ppp pap sent-username Two password 0 For-The-Show end R3# R3#