=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2006.12.20 15:42:44 =~=~=~=~=~=~=~=~=~=~=~= S6# S6# S6# S6# RACK14AS>1a Translating "1a" Translating "1a" % Unknown command or computer name, or unable to find computer address RACK14AS> [Resuming connection 6 to r6 ... ] S6# RACK14AS>1 [Resuming connection 1 to r1 ... ] R1> R1>en R1#confi t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int     line con 0 R1(config-line)#no exec-tim R1(config-line)#int s 0/0.1 R1(config-subif)#do sh run int s 0/0.1 Building configuration... Current configuration : 118 bytes ! interface Serial0/0.1 point-to-point ip address 208.28.1.1 255.255.255.240 frame-relay interface-dlci 103 end R1(config-subif)# ip address 208.28.1.1 255.255.255.248 R1(config-subif)#^Z R1# RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#sh run | b     int s 1/0 Building configuration... Current configuration : 111 bytes ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay ip split-horizon end R3#confit Translating "confit" Translating "confit" % Unknown command or computer name, or unable to find computer address R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s 1/0 R3(config-if)#no fram inv R3(config-if)#no fram inverse-arp R3(config-if)#i fram map ip 208.28.1ra1   1   .1 301 R3(config-if)#fram map ip 208.28.1.1 301 01 2  302 3 302  R3(config-if)# RACK14AS>2 [Resuming connection 2 to r2 ... ] R2#sh run int s 1/0.1 Building configuration... Current configuration : 111 bytes ! interface Serial1/0.1 multipoint ip address 208.28.1.3 255.255.255.248 frame-relay interface-dlci 203 end R2#sh run int s 1/0.1 2 Building configuration... Current configuration : 112 bytes ! interface Serial1/0.2 multipoint ip address 180.40.7.65 255.255.255.224 frame-relay interface-dlci 201 end R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0.1 R2(config-subif)#no frame-relay interface-dlci 203 R2(config-subif)#frf  ra R2(config-subif)#fra,m  m R2(config-subif)#frame-relay map ip 208.28.1.2 203 R2(config-subif)#frame-relay map ip 208.28.1.2 203 203 1 203 R2(config-subif)#frame-relay map ip 208.28.1.1 2032 203no frame-relay interface-dlci 203int s 1/0.1  2 R2(config-subif)#no frame-relay interface-dlci 201 R2(config-subif)#no frame-relay interface-dlci 201int s 1/0.2 frame-relay map ip 208.28.1.1 203 1 201  201  201  201  201  201  201  201  201  201 1 2018 2010 201. 2014 2010 201. 2017 201. 2016 2016 201 R2(config-subif)#router eigrp 100 R2(config-router)#net 208.28.1.129 0.0.0.0 R2(config-router)#net 180.0.7.65 0.0.0.040.7.65 0.0.0.0 R2(config-router)#do sh run int s 1/0.2 Building configuration... Current configuration : 116 bytes ! interface Serial1/0.2 multipoint ip address 180.40.7.65 255.255.255.224 frame-relay map ip 180.40.7.66 201 end R2(config-router)#net i 180.40.7.65 s 1/. 0.2 IP-EIGRP(Default-IP-Routing-Table:100): Not add: Neighbor address 180.40.7.65 is on the interface R2(config-router)#nei 180.40.7.65 s 1/0.2 s 1/0.2 6 s 1/0.2 R2(config-router)#^Z R2# *Mar 1 02:33:09.451: %SYS-5-CONFIG_I: Configured from console by console R2# RACK14AS>1 [Resuming connection 1 to r1 ... ] * R1#confi t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#router eigrp 100 R1(config-router)#net 180.40.7.66 0.0.0.0 R1(config-router)#nei 180.40.7.65 s 0/0.2 R1(config-router)#net 1 208.28.1.66 0.0.0.0 R1(config-router)#^Z R1# RACK14AS>5 [Resuming connection 5 to r5 ... ] S5#confi t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#roiuter       uter eigrep    p 100 S5(config-router)#net 208.28.1.65 0.0.0.0 S5(config-router)#net 208.28.1.65 0.0.0.0  0.0.0.0  0.0.0.0  02:37:12: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 208.28.1.66 (Vlan10) is up: new adjacency S5(config-router)#net 208.28.1. 0.0.0.0 1 0.0.0.0 3 0.0.0.0 0 0.0.0.0  S5(config-router)# 02:37:19: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 208.28.1.129 (Vlan20) is up: new adjacency S5(config-router)#^Z S5# S5# S5# S5# S5# 02:37:45: %SYS-5-CONFIG_I: Configured from console by console S5#sh ip      run | b router router eigrp 100 network 208.28.1.65 0.0.0.0 network 208.28.1.130 0.0.0.0 auto-summary ! ip classless ip http server ip http secure-server ! ! ! control-plane ! ! line con 0 exec-timeout 0 0 logging synchronous line vty 0 4 no login line vty 5 15 no login ! ! --More--   S5# RACK14AS>1 [Resuming connection 1 to r1 ... ] *Mar 1 02:35:05.049: %SYS-5-CONFIG_I: C R1#sh run | b router router eigrp 100 network 180.40.7.66 0.0.0.0 network 208.28.1.66 0.0.0.0 neighbor 180.40.7.65 Serial0/0.2 auto-summary ! no ip http server ip classless ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 ! ! end --More--   R1# RACK14AS>2 [Resuming connection 2 to r2 ... ] *M R2#sh run | b router router eigrp 100 network 180.40.7.65 0.0.0.0 network 208.28.1.129 0.0.0.0 neighbor 180.40.7.66 Serial1/0.2 auto-summary ! ip classless ! no ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous --More--   R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)# R2(config)#router rip R2(config-router)#ver 2 R2(config-router)#no auto R2(config-router)#net     pas R2(config-router)#passive-interface fa 0/1 R2(config-router)#passive-interface fa 0/1      s 1/0.2 R2(config-router)#net 208.28.1.0 R2(config-router)#net 180.40.0.0 R2(config-router)#nei 208.28.1.2 R2(config-router)#^Z R2# *Mar 1 02:38:29.103: %SYS-5-CONFIG_I: Configured from console by console R2# RACK14AS>1 [Resuming connection 1 to r1 ... ] R1#confi t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#router rip R1(config-router)#b ver 2 R1(config-router)#no auto R1(config-router)#pass we  w e 0/0 R1(config-router)#net 208.28.1.0 R1(config-router)#^Z R1# *Mar 1 02:40:21.816: %SYS-5-CONFIG_I: Configured from console by console RACK14AS>3 [Resuming connection 3 to r3 ... ] R3(config-if)#router rip R3(config-router)#ver 2 R3(config-router)#no R3(config-router)#no auto R3(config-router)#no auto-summary R3(config-router)#net 208.28.1.0 R3(config-router)#net r180.180. 180.40.0.0 R3(config-router)#nei 208.28.1.1 R3(config-router)#nei 208.28.1.1 3 R3(config-router)#^Z R3#sh ip *Mar 1 02:40:33.907: %SYS-5-CONFIG_I: Configured from console by console R3#sh ip proto Routing Protocol is "rip" Sending updates every 30 seconds Invalid after 180 seconds, hold down 180, flushed after 240 Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Redistributing: rip Neighbor(s): 208.28.1.3 208.28.1.1 Default version control: send version 2, receive version 2 Interface Send Recv Triggered RIP Key-chain Serial1/0 2 2 Serial1/2 2 2 Automatic network summarization is not in effect Maximum path: 4 Routing for Networks: 180.40.0.0 208.28.1.0 Routing Information Sources: Gateway Distance Last Update 180.40.7.2 120 00:00:05 208.28.1.1 120 00:00:16 208.28.1.3 120 00:00:08 --More--   Distance: (default is 120) R3#sh ip rp oute Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 3 subnets, 3 masks R 208.28.1.128/27 [120/1] via 180.40.7.2, 00:00:20, Serial1/2 [120/1] via 208.28.1.3, 00:00:22, Serial1/0 R 208.28.1.64/28 [120/1] via 208.28.1.1, 00:00:04, Serial1/0 C 208.28.1.0/29 is directly connected, Serial1/0 180.40.0.0/27 is subnetted, 2 subnets C 180.40.7.0 is directly connected, Serial1/2 R 180.40.7.64 [120/1] via 180.40.7.2, 00:00:21, Serial1/2 [120/1] via 208.28.1.3, 00:00:23, Serial1/0 R3#   RACK14AS>1 [Resuming connection 1 to r1 ... ] R1#coitnfi tl;askjdfuaubgfakj ^ % Invalid input detected at '^' marker. R1#confi t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#router rip R1(config-router)#red R1(config-router)#redistribute e R1(config-router)#redistribute eigrp 100 ? metric Metric for redistributed routes route-map Route map reference R1(config-router)#redistribute eigrp 100 me R1(config-router)#redistribute eigrp 100 metric 4 R1(config-router)#routre    er ei 100 R1(config-router)#red rip met ? <1-4294967295> Bandwidth metric in Kbits per second R1(config-router)#red rip met 128 ? <0-4294967295> EIGRP delay metric, in 10 microsecond units R1(config-router)#red rip met 128 2000 ? <0-255> EIGRP reliability metric where 255 is 100% reliable R1(config-router)#red rip met 128 2000 2565  5 1 1500 R1(config-router)#^Z R1# RACK14AS> [Resuming connection 1 to r1 ... ] *Ma R1#confi t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#e 0/0 ^ % Invalid input detected at '^' marker. R1(config)#int e 0/0 R1(config-if)#ban 100000 R1(config-if)#int s 0/0.2 R1(config-subif)#band 128 R1(config-subif)#^Z R1# RACK14AS>2 [Resuming connection 2 to r2 ... ] R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#router rip R2(config-router)#redi R2(config-router)#redistribute e R2(config-router)#redistribute eigrp 100 R2(config-router)#def R2(config-router)#default m R2(config-router)#default maximum-paths                 t-m R2(config-router)#default-metric 4 R2(config-router)#routre    er eigrp 100 R2(config-router)#redi rip R2(config-router)#d de R2(config-router)#default- R2(config-router)#default-m R2(config-router)#default-metric 128 2000 255 1 1500 R2(config-router)#\ ^Z R2# RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 4 subnets, 4 masks R 208.28.1.128/27 [120/1] via 180.40.7.2, 00:00:08, Serial1/2 [120/1] via 208.28.1.3, 00:00:18, Serial1/0 R 208.28.1.64/28 [120/1] via 208.28.1.1, 00:00:25, Serial1/0 C 208.28.1.0/29 is directly connected, Serial1/0 R 208.28.1.0/24 [120/4] via 208.28.1.1, 00:00:25, Serial1/0 [120/4] via 180.40.7.2, 00:00:09, Serial1/2 [120/4] via 208.28.1.3, 00:00:19, Serial1/0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks C 180.40.7.0/27 is directly connected, Serial1/2 R 180.40.0.0/16 [120/4] via 208.28.1.1, 00:00:00, Serial1/0 --More--   [120/4] via 180.40.7.2, 00:00:09, Serial1/2 [120/4] via 208.28.1.3, 00:00:20, Serial1/0 R 180.40.7.64/27 [120/1] via 180.40.7.2, 00:00:10, Serial1/2 [120/1] via 208.28.1.3, 00:00:20, Serial1/0 R3# RACK14AS>5 [Resuming connection 5 to r5 ... ] S5#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 208.28.1.0/24 is variably subnetted, 3 subnets, 3 masks C 208.28.1.128/27 is directly connected, Vlan20 C 208.28.1.64/28 is directly connected, Vlan10 D EX 208.28.1.0/29 [170/20512256] via 208.28.1.129, 00:00:59, Vlan20 [170/20512256] via 208.28.1.66, 00:00:59, Vlan10 D 180.40.0.0/16 [90/20512256] via 208.28.1.129, 00:02:08, Vlan20 [90/20512256] via 208.28.1.66, 00:02:08, Vlan10 S5#  pin 208.28.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/57/60 ms S5# RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#p 208.28.1.65 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.65, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/58/60 ms R3#p 208.28.1.65 6 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 208.28.1.66, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/59/65 ms R3# RACK14AS>1 [Resuming connection 1 to r1 ... ] *Ma R1#sh ip cef Prefix Next Hop Interface 0.0.0.0/0 drop Null0 (default route handler entry) 0.0.0.0/32 receive 17.57.100.0/24 attached Ethernet0/1 17.57.100.0/32 receive 17.57.100.1/32 receive 17.57.100.255/32 receive 180.40.0.0/16 0.0.0.0 Null0 180.40.7.0/27 208.28.1.2 Serial0/0.1 180.40.7.64/27 attached Serial0/0.2 180.40.7.64/32 receive 180.40.7.66/32 receive 180.40.7.95/32 receive 208.28.1.0/24 0.0.0.0 Null0 208.28.1.0/29 attached Serial0/0.1 208.28.1.0/32 receive 208.28.1.1/32 receive 208.28.1.7/32 receive 208.28.1.64/28 attached Ethernet0/0 208.28.1.64/32 receive 208.28.1.65/32 208.28.1.65 Ethernet0/0 208.28.1.66/32 receive 208.28.1.79/32 receive --More--  Prefix Next Hop Interface 208.28.1.128/27 208.28.1.65 Ethernet0/0 224.0.0.0/4 drop 224.0.0.0/24 receive 255.255.255.255/32 receive R1# RACK14AS>1 [Resuming connection 1 to r1 ... ] R1#sh run |  b router router eigrp 100 redistribute rip metric 128 2000 255 1 1500 network 180.40.7.66 0.0.0.0 network 208.28.1.66 0.0.0.0 neighbor 180.40.7.65 Serial0/0.2 auto-summary ! router rip version 2 redistribute eigrp 100 metric 4 passive-interface Ethernet0/0 network 208.28.1.0 no auto-summary ! no ip http server ip classless ! ! ! ! ! ! ! --More--   R1# RACK14AS>2 [Resuming connection 2 to r2 ... ] *Mar R2#sh run | b router router eigrp 100 redistribute rip network 180.40.7.65 0.0.0.0 network 208.28.1.129 0.0.0.0 neighbor 180.40.7.66 Serial1/0.2 default-metric 128 2000 255 1 1500 auto-summary ! router rip version 2 redistribute eigrp 100 passive-interface FastEthernet0/1 passive-interface Serial1/0.2 network 180.40.0.0 network 208.28.1.0 neighbor 208.28.1.2 default-metric 4 no auto-summary ! ip classless ! no ip http server no ip http secure-server --More--   R2#x3 % Incomplete command. R2# R2#sh     RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#sh ip int s 1/0 Serial1/0 is up, line protocol is up Internet address is 208.28.1.2/29 Broadcast address is 255.255.255.255 Address determined by setup command MTU is 1500 bytes Helper address is not set Directed broadcast forwarding is disabled Multicast reserved groups joined: 224.0.0.9 Outgoing access list is not set Inbound access list is not set Proxy ARP is enabled Local Proxy ARP is disabled Security level is default Split horizon is enabled ICMP redirects are always sent ICMP unreachables are always sent ICMP mask replies are never sent IP fast switching is enabled IP fast switching on the same interface is enabled IP Flow switching is disabled IP CEF switching is enabled IP CEF Fast switching turbo vector IP multicast fast switching is enabled --More--   R3#confi  t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s 1/0 R3(config-if)#no ip sp R3(config-if)#no ip split-horizon R3(config-if)#^Z R3# *Mar 1 02:49:42.150: %SYS-5-CONFIG_I: Configured from console by console R3#sh run | nb    b router router rip version 2 network 180.40.0.0 network 208.28.1.0 neighbor 208.28.1.3 neighbor 208.28.1.1 no auto-summary ! ip classless ! no ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! ! line con 0 --More--   R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ke R3(config)#key R3(config)#key ch R3(config)#key chain xxx R3(config-keychain)#k R3(config-keychain)#key 1 R3(config-keychain-key)#k R3(config-keychain-key)#key-string cisco R3(config-keychain-key)#int s 1/2 R3(config-if)#shut R3(config-if)#ip *Mar 1 02:51:09.020: %LINK-5-CHANGED: Interface Serial1/2, changed state to administratively down *Mar 1 02:51:10.022: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to down R3(config-if)#ip aut R3(config-if)#ip authe R3(config-if)#ip authentication ? key-chain key-chain mode mode R3(config-if)#ip authentication                rip R3(config-if)#ip rip au R3(config-if)#ip rip authentication ? key-chain Authentication key-chain mode Authentication mode R3(config-if)#ip rip authentication j ke R3(config-if)#ip rip authentication key-chain xxx R3(config-if)#ip rip au R3(config-if)#ip rip authentication m R3(config-if)#ip rip authentication mode m R3(config-if)#ip rip authentication mode md5 ? R3(config-if)#ip rip authentication mode md5 R3(config-if)# RACK14AS>3 [Resuming connection 3 to r3 ... ] R3(config-if)#exit     RACK14AS>2 [Resuming connection 2 to r2 ... ] *M R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#key ch R2(config)#key chain yyy R2(config-keychain)#k R2(config-keychain)#key 1 R2(config-keychain-key)#j k R2(config-keychain-key)#key-string cisco R2(config-keychain-key)#int s 1/2 R2(config-if)#ip rip auth R2(config-if)#ip rip authentication k R2(config-if)#ip rip authentication key-chain yyy R2(config-if)#ip ru ip aut R2(config-if)#ip rip authentication m R2(config-if)#ip rip authentication mode  R2(config-if)#ip rip authentication mode % Incomplete command. R2(config-if)#ip rip authentication mode n ,m  m R2(config-if)#^Z R2# RACK14AS>3 [Resuming connection 3 to r3 ... ] R3(config-if)#do deb ip rip RIP protocol debugging is on R3(config-if)# *Mar 1 02:52:20.085: RIP: sending v2 update to 224.0.0.9 via Serial1/0 (208.28.1.2) *Mar 1 02:52:20.085: RIP: build update entries *Mar 1 02:52:20.085: 180.40.0.0/16 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:52:20.085: 180.40.7.64/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:52:20.085: 208.28.1.0/24 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:52:20.085: 208.28.1.0/29 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:20.085: 208.28.1.64/28 via 208.28.1.1, metric 2, tag 0 *Mar 1 02:52:20.089: 208.28.1.128/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:52:20.089: RIP: sending v2 update to 208.28.1.3 via Serial1/0 (208.28.1.2) *Mar 1 02:52:20.089: RIP: build update entries *Mar 1 02:52:20.089: 180.40.0.0/16 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:52:20.089: 180.40.7.64/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:52:20.089: 208.28.1.0/24 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:52:20.089: 208.28.1.0/29 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:20.093: 208. R3(config-if)#28.1.64/28 via 208.28.1.1, metric 2, tag 0 *Mar 1 02:52:20.093: 208.28.1.128/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:52:20.093: RIP: sending v2 update to 208.28.1.1 via Serial1/0 (208.28.1.2) *Mar 1 02:52:20.093: RIP: build update entries *Mar 1 02:52:20.093: 180.40.0.0/16 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:52:20.093: 180.40.7.64/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:52:20.093: 208.28.1.0/24 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:52:20.097: 208.28.1.0/29 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:20.097: 208.28.1.64/28 via 208.28.1.1, metric 2, tag 0 *Mar 1 02:52:20.097: 208.28.1.128/27 via 208.28.1.3, metric 2, tag 0 R3(config-if)#no ahut ^ % Invalid input detected at '^' marker. R3(config-if)#no shut R3(config-if)# *Mar 1 02:52:27.449: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up *Mar 1 02:52:27.453: RIP: sending request on Serial1/2 to 224.0.0.9 *Mar 1 02:52:27.453: RIP: sending request on Serial1/2 to 224.0.0.9 *Mar 1 02:52:27.521: RIP: received packet with MD5 authentication *Mar 1 02:52:27.521: RIP: received v2 update from 180.40.7.2 on Serial1/2 *Mar 1 02:52:27.521: 180.40.0.0/16 via 0.0.0.0 in 4 hops *Mar 1 02:52:27.521: 180.40.7.64/27 via 0.0.0.0 in 1 hops *Mar 1 02:52:27.521: 208.28.1.0/24 via 0.0.0.0 in 4 hops *Mar 1 02:52:27.521: 208.28.1.0/29 via 0.0.0.0 in 1 hops *Mar 1 02:52:27.525: 208.28.1.64/28 via 0.0.0.0 in 4 hops *Mar 1 02:52:27.525: 208.28.1.128/27 via 0.0.0.0 in 1 hops *Mar 1 02:52:27.545: RIP: received packet with MD5 authentication *Mar 1 02:52:27.545: RIP: received v2 update from 180.40.7.2 on Serial1/2 *Mar 1 02:52:27.545: 180.40.0.0/16 via 0.0.0.0 in 4 hops *Mar 1 02:52:27.545: 180.40.7.6 R3(config-if)#4/27 via 0.0.0.0 in 1 hops *Mar 1 02:52:27.549: 208.28.1.0/24 via 0.0.0.0 in 4 hops *Mar 1 02:52:27.549: 208.28.1.0/29 via 0.0.0.0 in 1 hops *Mar 1 02:52:27.549: 208.28.1.64/28 via 0.0.0.0 in 4 hops *Mar 1 02:52:27.549: 208.28.1.128/27 via 0.0.0.0 in 1 hops *Mar 1 02:52:27.557: RIP: received packet with MD5 authentication *Mar 1 02:52:27.557: RIP: received v2 request from 180.40.7.2 on Serial1/2 *Mar 1 02:52:27.557: RIP: sending update with long TTL *Mar 1 02:52:27.557: RIP: sending v2 update to 180.40.7.2 via Serial1/2 (180.40.7.3) *Mar 1 02:52:27.561: RIP: build update entries *Mar 1 02:52:27.561: 208.28.1.0/29 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:27.561: 208.28.1.64/28 via 0.0.0.0, metric 2, tag 0 *Mar 1 02:52:27.569: RIP: received packet with MD5 authentication *Mar 1 02:52:27.569: RIP: received v2 request from 180.40.7.2 on Serial1/2 *Mar 1 02:52:27.569: RIP: sending update with long TTL *Mar 1 02:52:27.573: RIP: sending v2 update to 180.40.7.2 via Serial1/2 (180.40.7.3) *Mar 1 02:52:27.573: RIP: build update entries *Mar 1 02:52:27.573: 208.28.1.0/29 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:27.573: 208.28.1.64/28 via 0.0.0.0, metric 2, tag 0 *Mar 1 02:52:28.451: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up *Mar 1 02:52:29.452: RIP: sending v2 flash update to 224.0.0.9 via Serial1/0 (208.28.1.2) *Mar 1 02:52:29.452: RIP: build flash update entries *Mar 1 02:52:29.452: 180.40.7.0/27 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:29.452: RIP: sending v2 flash update to 208.28.1.3 via Serial1/0 (208.28.1.2) *Mar 1 02:52:29.452: RIP: build flash update entries *Mar 1 02:52:29.452: 180.40.7.0/27 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:29.452: RIP: sending v2 flash update to 208.28.1.1 via Serial1/0 (208.28.1.2) *Mar 1 02:52:29.456: RIP: build flash update entries *Mar 1 02:52:29.456: 180.40.7.0/27 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:29.456: RIP: sending v2 flash update to 224.0.0.9 via Serial1/2 (180.40.7.3) *Mar 1 02:52:29.456: RIP: build flash update entries - suppressing null update *Mar 1 02:52:29.472: RIP: received v2 update from 208.28.1.3 on Serial1/0 *Mar 1 02:52:29.472: 180.40.7.0/27 via 0.0.0.0 in 1 hops R3(config-if)# R3(config-if)# *Mar 1 02:52:36.279: RIP: received v2 update from 208.28.1.1 on Serial1/0 *Mar 1 02:52:36.279: 180.40.0.0/16 via 0.0.0.0 in 4 hops *Mar 1 02:52:36.279: 180.40.7.64/27 via 0.0.0.0 in 4 hops *Mar 1 02:52:36.279: 208.28.1.0/24 via 0.0.0.0 in 4 hops *Mar 1 02:52:36.279: 208.28.1.64/28 via 0.0.0.0 in 1 hops *Mar 1 02:52:36.279: 208.28.1.128/27 via 0.0.0.0 in 4 hops R3(config-if)# *Mar 1 02:52:39.705: RIP: received v2 update from 208.28.1.3 on Serial1/0 *Mar 1 02:52:39.705: 180.40.0.0/16 via 0.0.0.0 in 4 hops *Mar 1 02:52:39.709: 180.40.7.0/27 via 0.0.0.0 in 1 hops *Mar 1 02:52:39.709: 180.40.7.64/27 via 0.0.0.0 in 1 hops *Mar 1 02:52:39.709: 208.28.1.0/24 via 0.0.0.0 in 4 hops *Mar 1 02:52:39.709: 208.28.1.64/28 via 0.0.0.0 in 4 hops *Mar 1 02:52:39.709: 208.28.1.128/27 via 0.0.0.0 in 1 hops R3(config-if)# *Mar 1 02:52:46.400: RIP: sending v2 update to 224.0.0.9 via Serial1/0 (208.28.1.2) *Mar 1 02:52:46.400: RIP: build update entries *Mar 1 02:52:46.400: 180.40.0.0/16 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:52:46.400: 180.40.7.0/27 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:46.400: 180.40.7.64/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:52:46.400: 208.28.1.0/24 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:52:46.400: 208.28.1.0/29 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:46.404: 208.28.1.64/28 via 208.28.1.1, metric 2, tag 0 *Mar 1 02:52:46.404: 208.28.1.128/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:52:46.404: RIP: sending v2 update to 208.28.1.3 via Serial1/0 (208.28.1.2) *Mar 1 02:52:46.404: RIP: build update entries *Mar 1 02:52:46.404: 180.40.0.0/16 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:52:46.404: 180.40.7.0/27 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:46.404: 180.40.7.64/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:52:46.408: 208.28. R3(config-if)#1.0/24 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:52:46.408: 208.28.1.0/29 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:46.408: 208.28.1.64/28 via 208.28.1.1, metric 2, tag 0 *Mar 1 02:52:46.408: 208.28.1.128/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:52:46.408: RIP: sending v2 update to 208.28.1.1 via Serial1/0 (208.28.1.2) *Mar 1 02:52:46.408: RIP: build update entries *Mar 1 02:52:46.408: 180.40.0.0/16 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:52:46.412: 180.40.7.0/27 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:46.412: 180.40.7.64/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:52:46.412: 208.28.1.0/24 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:52:46.412: 208.28.1.0/29 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:46.412: 208.28.1.64/28 via 208.28.1.1, metric 2, tag 0 *Mar 1 02:52:46.412: 208.28.1.128/27 via 208.28.1.3, metric 2, tag 0 R3(config-if)# *Mar 1 02:52:53.472: RIP: sending v2 update to 224.0.0.9 via Serial1/2 (180.40.7.3) *Mar 1 02:52:53.472: RIP: build update entries *Mar 1 02:52:53.472: 208.28.1.0/29 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:52:53.472: 208.28.1.64/28 via 0.0.0.0, metric 2, tag 0 R3(config-if)# *Mar 1 02:52:56.216: RIP: received packet with MD5 authentication *Mar 1 02:52:56.216: RIP: received v2 update from 180.40.7.2 on Serial1/2 *Mar 1 02:52:56.216: 180.40.0.0/16 via 0.0.0.0 in 4 hops *Mar 1 02:52:56.220: 180.40.7.64/27 via 0.0.0.0 in 1 hops *Mar 1 02:52:56.220: 208.28.1.0/24 via 0.0.0.0 in 4 hops *Mar 1 02:52:56.220: 208.28.1.0/29 via 0.0.0.0 in 1 hops *Mar 1 02:52:56.220: 208.28.1.64/28 via 0.0.0.0 in 4 hops *Mar 1 02:52:56.220: 208.28.1.128/27 via 0.0.0.0 in 1 hops R3(config-if)# *Mar 1 02:53:02.751: RIP: received v2 update from 208.28.1.1 on Serial1/0 *Mar 1 02:53:02.751: 180.40.0.0/16 via 0.0.0.0 in 4 hops *Mar 1 02:53:02.751: 180.40.7.64/27 via 0.0.0.0 in 4 hops *Mar 1 02:53:02.751: 208.28.1.0/24 via 0.0.0.0 in 4 hops *Mar 1 02:53:02.751: 208.28.1.64/28 via 0.0.0.0 in 1 hops *Mar 1 02:53:02.751: 208.28.1.128/27 via 0.0.0.0 in 4 hops R3(config-if)# *Mar 1 02:53:07.987: RIP: received v2 update from 208.28.1.3 on Serial1/0 *Mar 1 02:53:07.987: 180.40.0.0/16 via 0.0.0.0 in 4 hops *Mar 1 02:53:07.991: 180.40.7.0/27 via 0.0.0.0 in 1 hops *Mar 1 02:53:07.991: 180.40.7.64/27 via 0.0.0.0 in 1 hops *Mar 1 02:53:07.991: 208.28.1.0/24 via 0.0.0.0 in 4 hops *Mar 1 02:53:07.991: 208.28.1.64/28 via 0.0.0.0 in 4 hops *Mar 1 02:53:07.991: 208.28.1.128/27 via 0.0.0.0 in 1 hops R3(config-if)# *Mar 1 02:53:16.337: RIP: sending v2 update to 224.0.0.9 via Serial1/0 (208.28.1.2) *Mar 1 02:53:16.337: RIP: build update entries *Mar 1 02:53:16.337: 180.40.0.0/16 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:53:16.337: 180.40.7.0/27 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:53:16.337: 180.40.7.64/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:53:16.337: 208.28.1.0/24 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:53:16.337: 208.28.1.0/29 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:53:16.341: 208.28.1.64/28 via 208.28.1.1, metric 2, tag 0 *Mar 1 02:53:16.341: 208.28.1.128/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:53:16.341: RIP: sending v2 update to 208.28.1.3 via Serial1/0 (208.28.1.2) *Mar 1 02:53:16.341: RIP: build update entries *Mar 1 02:53:16.341: 180.40.0.0/16 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:53:16.341: 180.40.7.0/27 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:53:16.341: 180.40.7.64/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:53:16.345: 208.28. R3(config-if)#1.0/24 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:53:16.345: 208.28.1.0/29 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:53:16.345: 208.28.1.64/28 via 208.28.1.1, metric 2, tag 0 *Mar 1 02:53:16.345: 208.28.1.128/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:53:16.345: RIP: sending v2 update to 208.28.1.1 via Serial1/0 (208.28.1.2) *Mar 1 02:53:16.345: RIP: build update entries *Mar 1 02:53:16.345: 180.40.0.0/16 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:53:16.349: 180.40.7.0/27 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:53:16.349: 180.40.7.64/27 via 208.28.1.3, metric 2, tag 0 *Mar 1 02:53:16.349: 208.28.1.0/24 via 208.28.1.1, metric 5, tag 0 *Mar 1 02:53:16.349: 208.28.1.0/29 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:53:16.349: 208.28.1.64/28 via 208.28.1.1, metric 2, tag 0 *Mar 1 02:53:16.349: 208.28.1.128/27 via 208.28.1.3, metric 2, tag 0 R3(config-if)# *Mar 1 02:53:19.695: RIP: sending v2 update to 224.0.0.9 via Serial1/2 (180.40.7.3) *Mar 1 02:53:19.695: RIP: build update entries *Mar 1 02:53:19.695: 208.28.1.0/29 via 0.0.0.0, metric 1, tag 0 *Mar 1 02:53:19.695: 208.28.1.64/28 via 0.0.0.0, metric 2, tag 0 R3(config-if)#^Z R3# *Mar 1 02:53:25.136: %SYS-5-CONFIG_I: Configured from console by console R3#u a *Mar 1 02:53:25.708: RIP: received packet with MD5 authentication *Mar 1 02:53:25.708: RIP: received v2 update from 180.40.7.2 on Serial1/2 *Mar 1 02:53:25.708: 180.40.0.0/16 via 0.0.0.0 in 4 hops *Mar 1 02:53:25.712: 180.40.7.64/27 via 0.0.0.0 in 1 hops *Mar 1 02:53:25.712: 208.28.1.0/24 via 0.0.0.0 in 4 hops *Mar 1 02:53:25.712: 208.28.1.0/29 via 0.0.0.0 in 1 hops *Mar 1 02:53:25.712: 208.28.1.64/28 via 0.0.0.0 in 4 hops *Mar 1 02:53:25.712: 208.28.1.128/27 via 0.0.0.0 in 1 hops R3#u all All possible debugging has been turned off R3# RACK14AS>2 [Resuming connection 2 to r2 ... ] *Ma R2#sh run | b key key chain yyy key 1 key-string cisco ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface FastEthernet0/0 --More--   no ip address shutdown duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 208.28.1.129 255.255.255.224 duplex auto speed auto ! interface Serial1/0 no ip address encapsulation frame-relay ! interface Serial1/0.1 multipoint ip address 208.28.1.3 255.255.255.248 frame-relay map ip 208.28.1.1 203 frame-relay map ip 208.28.1.2 203 ! --More--  interface Serial1/0.2 multipoint ip address 180.40.7.65 255.255.255.224 frame-relay map ip 180.40.7.66 201 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 ip rip authentication mode md5 ip rip authentication key-chain yyy clock rate 64000 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 --More--   no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router eigrp 100 redistribute rip network 180.40.7.65 0.0.0.0 network 208.28.1.129 0.0.0.0 neighbor 180.40.7.66 Serial1/0.2 default-metric 128 2000 255 1 1500 auto-summary ! router rip version 2 redistribute eigrp 100 passive-interface FastEthernet0/1 --More--   R2#sh ip  key   sh keycsh keyhsh keyash key R2# chash key ^ % Invalid input detected at '^' marker. R2# chash key sh key cha Key-chain yyy: key 1 -- text "cisco" accept lifetime (always valid) - (always valid) [valid now] send lifetime (always valid) - (always valid) [valid now] R2# RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#sh run | b key key chain xxx key 1 key-string cisco ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface FastEthernet0/0 --More--   ip address 17.80.1.1 255.255.255.0 duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay frame-relay map ip 208.28.1.1 301 frame-relay map ip 208.28.1.3 302 no frame-relay inverse-arp ! interface Serial1/1 no ip address --More--   shutdown ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 ip rip authentication mode md5 ip rip authentication key-chain xxx ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! --More--   R3#sh ip proto Routing Protocol is "rip" Sending updates every 30 seconds, next due in 24 seconds Invalid after 180 seconds, hold down 180, flushed after 240 Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Redistributing: rip Neighbor(s): 208.28.1.3 208.28.1.1 Default version control: send version 2, receive version 2 Interface Send Recv Triggered RIP Key-chain Serial1/0 2 2 Serial1/2 2 2 xxx Automatic network summarization is not in effect Maximum path: 4 Routing for Networks: 180.40.0.0 208.28.1.0 Routing Information Sources: Gateway Distance Last Update 180.40.7.2 120 00:00:25 208.28.1.1 120 00:00:19 208.28.1.3 120 00:00:14 --More--   R3# RACK14AS>5 [Resuming connection 5 to r5 ... ] S5#confi t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int lo 0 S5(config-if)#ip 20  a 02:59:06: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up S5(config-if)#ip add 208.28.1.193 255.255.255.255 S5(config-if)#ip add 208.28.1.193 255.255.255.255nt lo 0  1 S5(config-if)#int lo 1p add 208.28.1.193 255.255.255.2553 255.255.255.255  02:59:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback1, changed state to up S5(config-if)#ip add 208.28.1.19 255.255.255.2554 255.255.255.255 S5(config-if)#router eigrp 100 S5(config-router)#redis S5(config-router)#redistribute con S5(config-router)#redistribute connected S5(config-router)# RACK14AS>c 1 [Resuming connection 1 to r1 ... ] R1#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.57.100.0 is directly connected, Ethernet0/1 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks D EX 208.28.1.193/32 [170/179200] via 208.28.1.65, 00:00:06, Ethernet0/0 D EX 208.28.1.194/32 [170/179200] via 208.28.1.65, 00:00:06, Ethernet0/0 D 208.28.1.128/27 [90/51456] via 208.28.1.65, 00:12:53, Ethernet0/0 C 208.28.1.64/28 is directly connected, Ethernet0/0 C 208.28.1.0/29 is directly connected, Serial0/0.1 D 208.28.1.0/24 is a summary, 00:12:47, Null0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks R 180.40.7.0/27 [120/1] via 208.28.1.2, 00:00:10, Serial0/0.1 D 180.40.0.0/16 is a summary, 00:12:57, Null0 C 180.40.7.64/27 is directly connected, Serial0/0.2 R1#  sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.57.100.0 is directly connected, Ethernet0/1 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks D EX 208.28.1.193/32 [170/179200] via 208.28.1.65, 00:00:25, Ethernet0/0 D EX 208.28.1.194/32 [170/179200] via 208.28.1.65, 00:00:25, Ethernet0/0 D 208.28.1.128/27 [90/51456] via 208.28.1.65, 00:13:12, Ethernet0/0 C 208.28.1.64/28 is directly connected, Ethernet0/0 C 208.28.1.0/29 is directly connected, Serial0/0.1 D 208.28.1.0/24 is a summary, 00:13:06, Null0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks R 180.40.7.0/27 [120/1] via 208.28.1.2, 00:00:02, Serial0/0.1 D 180.40.0.0/16 is a summary, 00:13:16, Null0 C 180.40.7.64/27 is directly connected, Serial0/0.2 R1# sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.57.100.0 is directly connected, Ethernet0/1 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks D EX 208.28.1.193/32 [170/179200] via 208.28.1.65, 00:00:28, Ethernet0/0 D EX 208.28.1.194/32 [170/179200] via 208.28.1.65, 00:00:28, Ethernet0/0 D 208.28.1.128/27 [90/51456] via 208.28.1.65, 00:13:15, Ethernet0/0 C 208.28.1.64/28 is directly connected, Ethernet0/0 C 208.28.1.0/29 is directly connected, Serial0/0.1 D 208.28.1.0/24 is a summary, 00:13:09, Null0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks R 180.40.7.0/27 [120/1] via 208.28.1.2, 00:00:05, Serial0/0.1 D 180.40.0.0/16 is a summary, 00:13:19, Null0 C 180.40.7.64/27 is directly connected, Serial0/0.2 R1# RACK14AS>2 [Resuming connection 2 to r2 ... ] R2#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/5] via 208.28.1.1, 00:00:10, Serial1/0.1 [120/5] via 180.40.7.3, 00:00:02, Serial1/2 R 208.28.1.194/32 [120/5] via 208.28.1.1, 00:00:10, Serial1/0.1 [120/5] via 180.40.7.3, 00:00:02, Serial1/2 C 208.28.1.128/27 is directly connected, FastEthernet0/1 D 208.28.1.64/28 [90/28416] via 208.28.1.130, 00:22:44, FastEthernet0/1 C 208.28.1.0/29 is directly connected, Serial1/0.1 D 208.28.1.0/24 is a summary, 00:23:07, Null0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks C 180.40.7.0/27 is directly connected, Serial1/2 D 180.40.0.0/16 is a summary, 00:13:25, Null0 C 180.40.7.64/27 is directly connected, Serial1/0.2 R2#  confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#ip access-list utt     st no LoopsLoops  R2(config-std-nacl)#per 208.28.1.193 R2(config-std-nacl)#per 208.28.1.193 4 R2(config-std-nacl)#router rip R2(config-router)#dist R2(config-router)#dista R2(config-router)#distance ? <1-255> Administrative distance R2(config-router)#distance 171 ? A.B.C.D IP Source address R2(config-router)#distance 171 0.0.0.0 255.255.255.255 ? <1-99> IP Standard access list number <1300-1999> IP Standard expanded access list number WORD Standard access-list name R2(config-router)#distance 171 0.0.0.0 255.255.255.255 NO    noLoops R2(config-router)#^Z R2#sh ip *Mar 1 03:00:08.941: %SYS-5-CONFIG_I: Configured from console by console R2#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/5] via 208.28.1.1, 00:00:10, Serial1/0.1 [120/5] via 180.40.7.3, 00:00:22, Serial1/2 R 208.28.1.194/32 [120/5] via 208.28.1.1, 00:00:10, Serial1/0.1 [120/5] via 180.40.7.3, 00:00:22, Serial1/2 C 208.28.1.128/27 is directly connected, FastEthernet0/1 D 208.28.1.64/28 [90/28416] via 208.28.1.130, 00:25:54, FastEthernet0/1 C 208.28.1.0/29 is directly connected, Serial1/0.1 D 208.28.1.0/24 is a summary, 00:26:17, Null0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks C 180.40.7.0/27 is directly connected, Serial1/2 D 180.40.0.0/16 is a summary, 00:16:35, Null0 C 180.40.7.64/27 is directly connected, Serial1/0.2 R2#w sh    clea ip rout * R2#clea ip rout *sh ip route  Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks D EX 208.28.1.193/32 [170/156160] via 208.28.1.130, 00:00:01, FastEthernet0/1 D EX 208.28.1.194/32 [170/156160] via 208.28.1.130, 00:00:01, FastEthernet0/1 C 208.28.1.128/27 is directly connected, FastEthernet0/1 D 208.28.1.64/28 [90/28416] via 208.28.1.130, 00:00:01, FastEthernet0/1 C 208.28.1.0/29 is directly connected, Serial1/0.1 D 208.28.1.0/24 is a summary, 00:00:01, Null0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks C 180.40.7.0/27 is directly connected, Serial1/2 D 180.40.0.0/16 is a summary, 00:00:02, Null0 C 180.40.7.64/27 is directly connected, Serial1/0.2 R2#q sh ip rip data 180.40.0.0/16 auto-summary 180.40.0.0/16 redistributed [4] via 0.0.0.0, 180.40.7.0/27 directly connected, Serial1/2 180.40.7.64/27 directly connected, Serial1/0.2 208.28.1.0/24 auto-summary 208.28.1.0/24 redistributed [4] via 0.0.0.0, 208.28.1.0/29 directly connected, Serial1/0.1 208.28.1.64/28 redistributed [4] via 208.28.1.130, 208.28.1.128/27 directly connected, FastEthernet0/1 208.28.1.193/32 redistributed [4] via 208.28.1.130, 208.28.1.194/32 redistributed [4] via 208.28.1.130, R2# RACK14AS>1 [Resuming connection 1 to r1 ... ] R1#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.57.100.0 is directly connected, Ethernet0/1 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/5] via 208.28.1.3, 00:00:15, Serial0/0.1 R 208.28.1.194/32 [120/5] via 208.28.1.3, 00:00:15, Serial0/0.1 D 208.28.1.128/27 [90/51456] via 208.28.1.65, 00:17:05, Ethernet0/0 C 208.28.1.64/28 is directly connected, Ethernet0/0 C 208.28.1.0/29 is directly connected, Serial0/0.1 D 208.28.1.0/24 is a summary, 00:16:59, Null0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks R 180.40.7.0/27 [120/1] via 208.28.1.2, 00:00:16, Serial0/0.1 D 180.40.0.0/16 is a summary, 00:17:09, Null0 C 180.40.7.64/27 is directly connected, Serial0/0.2 R1#  confi t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#ip access st N noLopp  ops R1(config-std-nacl)#per 208.28.1.193 R1(config-std-nacl)#per 208.28.1.193 4 R1(config-std-nacl)#router rip R1(config-router)#dista R1(config-router)#distance 171 208/.  .28.1.3 2 0.0.0.0 noLoop[s  s R1(config-router)#^Z R1#c *Mar 1 03:02:46.364: %SYS-5-CONFIG_I: Configured from console by consolelea ip rout * R1#clea ip rout *onfi t sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.57.100.0 is directly connected, Ethernet0/1 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks D EX 208.28.1.193/32 [170/179200] via 208.28.1.65, 00:00:02, Ethernet0/0 D EX 208.28.1.194/32 [170/179200] via 208.28.1.65, 00:00:02, Ethernet0/0 D 208.28.1.128/27 [90/51456] via 208.28.1.65, 00:00:02, Ethernet0/0 C 208.28.1.64/28 is directly connected, Ethernet0/0 C 208.28.1.0/29 is directly connected, Serial0/0.1 D 208.28.1.0/24 is a summary, 00:00:03, Null0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks R 180.40.7.0/27 [120/1] via 208.28.1.2, 00:00:02, Serial0/0.1 D 180.40.0.0/16 is a summary, 00:00:03, Null0 C 180.40.7.64/27 is directly connected, Serial0/0.2 R1#sh ip rip data 180.40.0.0/16 auto-summary 180.40.0.0/16 redistributed [4] via 0.0.0.0, 180.40.7.0/27 [1] via 208.28.1.2, 00:00:10, Serial0/0.1 180.40.7.64/27 redistributed [4] via 0.0.0.0, 208.28.1.0/24 auto-summary 208.28.1.0/24 redistributed [4] via 0.0.0.0, 208.28.1.0/29 directly connected, Serial0/0.1 208.28.1.64/28 directly connected, Ethernet0/0 208.28.1.128/27 redistributed [4] via 208.28.1.65, 208.28.1.193/32 redistributed [4] via 208.28.1.65, 208.28.1.194/32 redistributed [4] via 208.28.1.65, R1# RACK14AS>2 [Resuming connection 2 to r2 ... ] R2#sh ip rip data 180.40.0.0/16 auto-summary 180.40.0.0/16 redistributed [4] via 0.0.0.0, 180.40.7.0/27 directly connected, Serial1/2 180.40.7.64/27 directly connected, Serial1/0.2 208.28.1.0/24 auto-summary 208.28.1.0/24 redistributed [4] via 0.0.0.0, 208.28.1.0/29 directly connected, Serial1/0.1 208.28.1.64/28 redistributed [4] via 208.28.1.130, 208.28.1.128/27 directly connected, FastEthernet0/1 208.28.1.193/32 redistributed [4] via 208.28.1.130, 208.28.1.194/32 redistributed [4] via 208.28.1.130, R2# RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#sh ip proto Routing Protocol is "rip" Sending updates every 30 seconds, next due in 11 seconds Invalid after 180 seconds, hold down 180, flushed after 240 Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Redistributing: rip Neighbor(s): 208.28.1.3 208.28.1.1 Default version control: send version 2, receive version 2 Interface Send Recv Triggered RIP Key-chain Serial1/0 2 2 Serial1/2 2 2 xxx Automatic network summarization is not in effect Maximum path: 4 Routing for Networks: 180.40.0.0 208.28.1.0 Routing Information Sources: Gateway Distance Last Update 180.40.7.2 120 00:00:02 208.28.1.1 120 00:00:08 208.28.1.3 120 00:00:23 --More--   R3#sh ip protorun | b keyu all sh run | b keyu all confi tsh run | b routerconf t sh ip int s 1/0p 208.28.1.66 5sh ip route protoroute Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/4] via 208.28.1.1, 00:00:15, Serial1/0 [120/4] via 180.40.7.2, 00:00:09, Serial1/2 [120/4] via 208.28.1.3, 00:00:04, Serial1/0 R 208.28.1.194/32 [120/4] via 208.28.1.1, 00:00:15, Serial1/0 [120/4] via 180.40.7.2, 00:00:09, Serial1/2 [120/4] via 208.28.1.3, 00:00:05, Serial1/0 R 208.28.1.128/27 [120/1] via 208.28.1.3, 00:00:05, Serial1/0 [120/1] via 180.40.7.2, 00:00:10, Serial1/2 R 208.28.1.64/28 [120/1] via 208.28.1.1, 00:00:16, Serial1/0 C 208.28.1.0/29 is directly connected, Serial1/0 --More--  R 208.28.1.0/24 [120/4] via 208.28.1.1, 00:00:20, Serial1/0 [120/4] via 208.28.1.3, 00:00:09, Serial1/0 [120/4] via 180.40.7.2, 00:00:14, Serial1/2 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks C 180.40.7.0/27 is directly connected, Serial1/2 R 180.40.0.0/16 [120/4] via 208.28.1.1, 00:00:20, Serial1/0 [120/4] via 208.28.1.3, 00:00:09, Serial1/0 [120/4] via 180.40.7.2, 00:00:14, Serial1/2 R 180.40.7.64/27 [120/1] via 208.28.1.3, 00:00:09, Serial1/0 [120/1] via 180.40.7.2, 00:00:14, Serial1/2 R3# RACK14AS>1 [Resuming connection 1 to r1 ... ] R1#confi t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#ip access-list sta Loop193 R1(config-std-nacl)#per 208.28.1.13 93 R1(config-std-nacl)#router rip R1(config-router)#off R1(config-router)#offset-list ? <0-99> Access list of networks to apply offset (0 selects all networks) <1300-1999> Access list of networks to apply offset (expanded range) WORD Access-list name R1(config-router)#offset-list Loop193 ? in Perform offset on incoming updates out Perform offset on outgoing updates R1(config-router)#offset-list Loop193 out ? <0-16> Offset R1(config-router)#offset-list Loop193 out 3 R1(config-router)#^Z R1# *Mar 1 03:04:59.490: %SYS-5-CONFIG_I: Configured from console by console RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/4] via 208.28.1.1, 00:00:26, Serial1/0 [120/4] via 180.40.7.2, 00:00:14, Serial1/2 [120/4] via 208.28.1.3, 00:00:15, Serial1/0 R 208.28.1.194/32 [120/4] via 208.28.1.1, 00:00:26, Serial1/0 [120/4] via 180.40.7.2, 00:00:14, Serial1/2 [120/4] via 208.28.1.3, 00:00:16, Serial1/0 R 208.28.1.128/27 [120/1] via 208.28.1.3, 00:00:16, Serial1/0 [120/1] via 180.40.7.2, 00:00:15, Serial1/2 R 208.28.1.64/28 [120/1] via 208.28.1.1, 00:00:27, Serial1/0 C 208.28.1.0/29 is directly connected, Serial1/0 --More--   R3#[Ash ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/4] via 180.40.7.2, 00:00:24, Serial1/2 [120/4] via 208.28.1.3, 00:00:25, Serial1/0 R 208.28.1.194/32 [120/4] via 208.28.1.1, 00:00:07, Serial1/0 [120/4] via 180.40.7.2, 00:00:24, Serial1/2 [120/4] via 208.28.1.3, 00:00:25, Serial1/0 R 208.28.1.128/27 [120/1] via 208.28.1.3, 00:00:26, Serial1/0 [120/1] via 180.40.7.2, 00:00:25, Serial1/2 R 208.28.1.64/28 [120/1] via 208.28.1.1, 00:00:08, Serial1/0 C 208.28.1.0/29 is directly connected, Serial1/0 R 208.28.1.0/24 [120/4] via 208.28.1.1, 00:00:08, Serial1/0 --More--   R3# RACK14AS>2 [Resuming connection 2 to r2 ... ] R2#confti t ^ % Invalid input detected at '^' marker. R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#ip access R2(config)#ip access-list l Loop192 ^ % Invalid input detected at '^' marker. R2(config)#ip access-list Loop192 3sLoop193tLoop193 Loop193 R2(config-std-nacl)#per 208.28.1.193 R2(config-std-nacl)#route-map Prob5 R2(config-route-map)#match ip add Loop193 R2(config-route-map)#set met R2(config-route-map)#set metric 7 R2(config-route-map)#set metric 7match ip add Loop193route-map Prob5  20 R2(config-route-map)#do sh run | b router router eigrp 100 redistribute rip network 180.40.7.65 0.0.0.0 network 208.28.1.129 0.0.0.0 neighbor 180.40.7.66 Serial1/0.2 default-metric 128 2000 255 1 1500 auto-summary ! router rip version 2 redistribute eigrp 100 passive-interface FastEthernet0/1 passive-interface Serial1/0.2 network 180.40.0.0 network 208.28.1.0 neighbor 208.28.1.2 default-metric 4 distance 171 0.0.0.0 255.255.255.255 noLoops no auto-summary ! ip classless ! no ip http server --More--   R2(config-route-map)#router rip R2(config-router)# redistribute eigrp 100 R2(config-router)# redistribute eigrp 100 rout R2(config-router)# redistribute eigrp 100 route-map Prob5 R2(config-router)#^Z R2# *Mar 1 03:05:48.438: %SYS-5-CONFIG_I: Configured from console RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#sh ip routeprotoroute Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/7] via 208.28.1.3, 00:00:03, Serial1/0 R 208.28.1.194/32 [120/4] via 208.28.1.1, 00:00:06, Serial1/0 [120/4] via 180.40.7.2, 00:00:21, Serial1/2 [120/4] via 208.28.1.3, 00:00:23, Serial1/0 R 208.28.1.128/27 [120/1] via 208.28.1.3, 00:00:23, Serial1/0 [120/1] via 180.40.7.2, 00:00:22, Serial1/2 R 208.28.1.64/28 [120/1] via 208.28.1.1, 00:00:08, Serial1/0 C 208.28.1.0/29 is directly connected, Serial1/0 R 208.28.1.0/24 [120/4] via 208.28.1.1, 00:00:08, Serial1/0 [120/4] via 208.28.1.3, 00:00:24, Serial1/0 --More--   R3#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/7] via 208.28.1.3, 00:00:03, Serial1/0 [120/7] via 180.40.7.2, 00:00:00, Serial1/2 R 208.28.1.194/32 [120/4] via 208.28.1.1, 00:00:14, Serial1/0 [120/4] via 180.40.7.2, 00:00:00, Serial1/2 [120/4] via 208.28.1.3, 00:00:03, Serial1/0 R 208.28.1.128/27 [120/1] via 208.28.1.3, 00:00:04, Serial1/0 [120/1] via 180.40.7.2, 00:00:01, Serial1/2 R 208.28.1.64/28 [120/1] via 208.28.1.1, 00:00:15, Serial1/0 C 208.28.1.0/29 is directly connected, Serial1/0 R 208.28.1.0/24 [120/4] via 208.28.1.1, 00:00:15, Serial1/0 --More--   R3#[Ash ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/7] via 208.28.1.3, 00:00:09, Serial1/0 [120/7] via 180.40.7.2, 00:00:06, Serial1/2 R 208.28.1.194/32 [120/4] via 208.28.1.1, 00:00:20, Serial1/0 [120/4] via 180.40.7.2, 00:00:06, Serial1/2 [120/4] via 208.28.1.3, 00:00:09, Serial1/0 R 208.28.1.128/27 [120/1] via 208.28.1.3, 00:00:11, Serial1/0 [120/1] via 180.40.7.2, 00:00:07, Serial1/2 R 208.28.1.64/28 [120/1] via 208.28.1.1, 00:00:21, Serial1/0 C 208.28.1.0/29 is directly connected, Serial1/0 R 208.28.1.0/24 [120/4] via 208.28.1.1, 00:00:21, Serial1/0 --More--   [120/4] via 208.28.1.3, 00:00:11, Serial1/0 [120/4] via 180.40.7.2, 00:00:09, Serial1/2 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks C 180.40.7.0/27 is directly connected, Serial1/2 R 180.40.0.0/16 [120/4] via 208.28.1.1, 00:00:24, Serial1/0 [120/4] via 208.28.1.3, 00:00:13, Serial1/0 [120/4] via 180.40.7.2, 00:00:09, Serial1/2 R 180.40.7.64/27 [120/1] via 208.28.1.3, 00:00:13, Serial1/0 [120/1] via 180.40.7.2, 00:00:09, Serial1/2 R3#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/7] via 208.28.1.3, 00:00:14, Serial1/0 [120/7] via 180.40.7.2, 00:00:11, Serial1/2 R 208.28.1.194/32 [120/4] via 208.28.1.1, 00:00:25, Serial1/0 [120/4] via 180.40.7.2, 00:00:11, Serial1/2 [120/4] via 208.28.1.3, 00:00:14, Serial1/0 R 208.28.1.128/27 [120/1] via 208.28.1.3, 00:00:15, Serial1/0 [120/1] via 180.40.7.2, 00:00:12, Serial1/2 R 208.28.1.64/28 [120/1] via 208.28.1.1, 00:00:26, Serial1/0 C 208.28.1.0/29 is directly connected, Serial1/0 R 208.28.1.0/24 [120/4] via 208.28.1.1, 00:00:26, Serial1/0 --More--   [120/4] via 208.28.1.3, 00:00:15, Serial1/0 [120/4] via 180.40.7.2, 00:00:13, Serial1/2 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks C 180.40.7.0/27 is directly connected, Serial1/2 R 180.40.0.0/16 [120/4] via 208.28.1.1, 00:00:27, Serial1/0 [120/4] via 208.28.1.3, 00:00:16, Serial1/0 [120/4] via 180.40.7.2, 00:00:13, Serial1/2 R 180.40.7.64/27 [120/1] via 208.28.1.3, 00:00:16, Serial1/0 [120/1] via 180.40.7.2, 00:00:13, Serial1/2 R3#clea ip rout * R3#clea ip rout *sh ip route  Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/7] via 180.40.7.2, 00:00:01, Serial1/2 R 208.28.1.194/32 [120/4] via 180.40.7.2, 00:00:01, Serial1/2 R 208.28.1.128/27 [120/1] via 180.40.7.2, 00:00:01, Serial1/2 R 208.28.1.64/28 [120/4] via 180.40.7.2, 00:00:01, Serial1/2 C 208.28.1.0/29 is directly connected, Serial1/0 R 208.28.1.0/24 [120/4] via 180.40.7.2, 00:00:02, Serial1/2 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks C 180.40.7.0/27 is directly connected, Serial1/2 R 180.40.0.0/16 [120/4] via 180.40.7.2, 00:00:02, Serial1/2 R 180.40.7.64/27 [120/1] via 180.40.7.2, 00:00:02, Serial1/2 R3#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/7] via 180.40.7.2, 00:00:03, Serial1/2 R 208.28.1.194/32 [120/4] via 180.40.7.2, 00:00:03, Serial1/2 R 208.28.1.128/27 [120/1] via 180.40.7.2, 00:00:03, Serial1/2 R 208.28.1.64/28 [120/4] via 180.40.7.2, 00:00:03, Serial1/2 C 208.28.1.0/29 is directly connected, Serial1/0 R 208.28.1.0/24 [120/4] via 180.40.7.2, 00:00:04, Serial1/2 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks C 180.40.7.0/27 is directly connected, Serial1/2 R 180.40.0.0/16 [120/4] via 180.40.7.2, 00:00:04, Serial1/2 R 180.40.7.64/27 [120/1] via 180.40.7.2, 00:00:04, Serial1/2 R3#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/7] via 180.40.7.2, 00:00:05, Serial1/2 R 208.28.1.194/32 [120/4] via 180.40.7.2, 00:00:05, Serial1/2 R 208.28.1.128/27 [120/1] via 180.40.7.2, 00:00:05, Serial1/2 R 208.28.1.64/28 [120/4] via 180.40.7.2, 00:00:05, Serial1/2 C 208.28.1.0/29 is directly connected, Serial1/0 R 208.28.1.0/24 [120/4] via 180.40.7.2, 00:00:06, Serial1/2 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks C 180.40.7.0/27 is directly connected, Serial1/2 R 180.40.0.0/16 [120/4] via 180.40.7.2, 00:00:07, Serial1/2 R 180.40.7.64/27 [120/1] via 180.40.7.2, 00:00:07, Serial1/2 R3# sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/7] via 180.40.7.2, 00:00:08, Serial1/2 R 208.28.1.194/32 [120/4] via 180.40.7.2, 00:00:08, Serial1/2 R 208.28.1.128/27 [120/1] via 180.40.7.2, 00:00:08, Serial1/2 R 208.28.1.64/28 [120/4] via 180.40.7.2, 00:00:08, Serial1/2 C 208.28.1.0/29 is directly connected, Serial1/0 R 208.28.1.0/24 [120/4] via 180.40.7.2, 00:00:09, Serial1/2 [120/4] via 208.28.1.3, 00:00:00, Serial1/0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks C 180.40.7.0/27 is directly connected, Serial1/2 R 180.40.0.0/16 [120/4] via 180.40.7.2, 00:00:09, Serial1/2 --More--   R3#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/7] via 180.40.7.2, 00:00:00, Serial1/2 [120/7] via 208.28.1.3, 00:00:02, Serial1/0 R 208.28.1.194/32 [120/4] via 180.40.7.2, 00:00:00, Serial1/2 [120/4] via 208.28.1.3, 00:00:02, Serial1/0 R 208.28.1.128/27 [120/1] via 180.40.7.2, 00:00:00, Serial1/2 [120/1] via 208.28.1.3, 00:00:04, Serial1/0 R 208.28.1.64/28 [120/4] via 180.40.7.2, 00:00:01, Serial1/2 [120/4] via 208.28.1.3, 00:00:04, Serial1/0 C 208.28.1.0/29 is directly connected, Serial1/0 R 208.28.1.0/24 [120/4] via 180.40.7.2, 00:00:01, Serial1/2 --More--   [120/4] via 208.28.1.3, 00:00:04, Serial1/0 --More--   R3#[A % Unknown command or computer name, or unable to find computer address R3#[Ash ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/7] via 180.40.7.2, 00:00:05, Serial1/2 [120/7] via 208.28.1.3, 00:00:08, Serial1/0 R 208.28.1.194/32 [120/4] via 180.40.7.2, 00:00:05, Serial1/2 [120/4] via 208.28.1.3, 00:00:08, Serial1/0 R 208.28.1.128/27 [120/1] via 180.40.7.2, 00:00:05, Serial1/2 [120/1] via 208.28.1.3, 00:00:09, Serial1/0 R 208.28.1.64/28 [120/4] via 180.40.7.2, 00:00:07, Serial1/2 [120/4] via 208.28.1.3, 00:00:09, Serial1/0 C 208.28.1.0/29 is directly connected, Serial1/0 R 208.28.1.0/24 [120/4] via 180.40.7.2, 00:00:07, Serial1/2 --More--   [120/4] via 208.28.1.3, 00:00:09, Serial1/0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks C 180.40.7.0/27 is directly connected, Serial1/2 R 180.40.0.0/16 [120/4] via 180.40.7.2, 00:00:08, Serial1/2 [120/4] via 208.28.1.3, 00:00:10, Serial1/0 R 180.40.7.64/27 [120/1] via 180.40.7.2, 00:00:08, Serial1/2 [120/1] via 208.28.1.3, 00:00:10, Serial1/0 R3#sh ip rip data 180.40.0.0/16 auto-summary 180.40.0.0/16 [4] via 208.28.1.3, 00:00:14, Serial1/0 [4] via 180.40.7.2, 00:00:12, Serial1/2 180.40.7.0/27 directly connected, Serial1/2 180.40.7.64/27 [1] via 208.28.1.3, 00:00:14, Serial1/0 [1] via 180.40.7.2, 00:00:12, Serial1/2 208.28.1.0/24 auto-summary 208.28.1.0/24 [4] via 208.28.1.3, 00:00:14, Serial1/0 [4] via 180.40.7.2, 00:00:12, Serial1/2 208.28.1.0/29 directly connected, Serial1/0 208.28.1.64/28 [4] via 208.28.1.3, 00:00:14, Serial1/0 [4] via 180.40.7.2, 00:00:12, Serial1/2 208.28.1.128/27 [1] via 208.28.1.3, 00:00:14, Serial1/0 [1] via 180.40.7.2, 00:00:12, Serial1/2 208.28.1.193/32 [7] via 208.28.1.3, 00:00:14, Serial1/0 [7] via 180.40.7.2, 00:00:12, Serial1/2 208.28.1.194/32 --More--   [4] via 208.28.1.3, 00:00:19, Serial1/0 [4] via 180.40.7.2, 00:00:17, Serial1/2 R3#sh ip rip data 180.40.0.0/16 auto-summary 180.40.0.0/16 [4] via 208.28.1.1, 00:00:06, Serial1/0 [4] via 208.28.1.3, 00:00:23, Serial1/0 [4] via 180.40.7.2, 00:00:21, Serial1/2 180.40.7.0/27 directly connected, Serial1/2 180.40.7.64/27 [1] via 208.28.1.3, 00:00:23, Serial1/0 [1] via 180.40.7.2, 00:00:21, Serial1/2 208.28.1.0/24 auto-summary 208.28.1.0/24 [4] via 208.28.1.1, 00:00:06, Serial1/0 [4] via 208.28.1.3, 00:00:23, Serial1/0 [4] via 180.40.7.2, 00:00:21, Serial1/2 208.28.1.0/29 directly connected, Serial1/0 208.28.1.64/28 [1] via 208.28.1.1, 00:00:06, Serial1/0 208.28.1.128/27 [1] via 208.28.1.3, 00:00:23, Serial1/0 [1] via 180.40.7.2, 00:00:21, Serial1/2 208.28.1.193/32 [7] via 208.28.1.1, 00:00:06, Serial1/0 [7] via 208.28.1.3, 00:00:23, Serial1/0 --More--   [7] via 180.40.7.2, 00:00:22, Serial1/2 208.28.1.194/32 [4] via 208.28.1.1, 00:00:08, Serial1/0 [4] via 208.28.1.3, 00:00:24, Serial1/0 [4] via 180.40.7.2, 00:00:22, Serial1/2 R3#sh ip rip dataoute  Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 1 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/7] via 180.40.7.2, 00:00:26, Serial1/2 [120/7] via 208.28.1.3, 00:00:03, Serial1/0 [120/7] via 208.28.1.1, 00:00:11, Serial1/0 R 208.28.1.194/32 [120/4] via 180.40.7.2, 00:00:26, Serial1/2 [120/4] via 208.28.1.3, 00:00:03, Serial1/0 [120/4] via 208.28.1.1, 00:00:13, Serial1/0 R 208.28.1.128/27 [120/1] via 180.40.7.2, 00:00:27, Serial1/2 [120/1] via 208.28.1.3, 00:00:04, Serial1/0 R 208.28.1.64/28 [120/1] via 208.28.1.1, 00:00:13, Serial1/0 C 208.28.1.0/29 is directly connected, Serial1/0 --More--  R 208.28.1.0/24 [120/4] via 180.40.7.2, 00:00:00, Serial1/2 [120/4] via 208.28.1.3, 00:00:05, Serial1/0 [120/4] via 208.28.1.1, 00:00:14, Serial1/0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks C 180.40.7.0/27 is directly connected, Serial1/2 R 180.40.0.0/16 [120/4] via 180.40.7.2, 00:00:00, Serial1/2 [120/4] via 208.28.1.3, 00:00:05, Serial1/0 [120/4] via 208.28.1.1, 00:00:14, Serial1/0 R 180.40.7.64/27 [120/1] via 180.40.7.2, 00:00:00, Serial1/2 [120/1] via 208.28.1.3, 00:00:05, Serial1/0 R3# RACK14AS>1 [Resuming connection 1 to r1 ... ] R1#sh run | b router router eigrp 100 redistribute rip metric 128 2000 255 1 1500 network 180.40.7.66 0.0.0.0 network 208.28.1.66 0.0.0.0 neighbor 180.40.7.65 Serial0/0.2 auto-summary ! router rip version 2 redistribute eigrp 100 metric 4 passive-interface Ethernet0/0 offset-list Loop193 out 3 network 208.28.1.0 distance 171 208.28.1.2 0.0.0.0 noLoops no auto-summary ! no ip http server ip classless ! ! ! ip access-list standard Loop193 permit 208.28.1.193 --More--  ip access-list standard noLoops permit 208.28.1.193 permit 208.28.1.194 ! ! ! ! ! ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 ! ! end R1# R1# RACK14AS>2 [Resuming connection 2 to r2 ... ] le R2# R2#sh run | b router router eigrp 100 redistribute rip network 180.40.7.65 0.0.0.0 network 208.28.1.129 0.0.0.0 neighbor 180.40.7.66 Serial1/0.2 default-metric 128 2000 255 1 1500 auto-summary ! router rip version 2 redistribute eigrp 100 route-map Prob5 passive-interface FastEthernet0/1 passive-interface Serial1/0.2 network 180.40.0.0 network 208.28.1.0 neighbor 208.28.1.2 default-metric 4 distance 171 0.0.0.0 255.255.255.255 noLoops no auto-summary ! ip classless ! no ip http server --More--  no ip http secure-server ! ip access-list standard Loop193 permit 208.28.1.193 ip access-list standard noLoops permit 208.28.1.193 permit 208.28.1.194 ! ! route-map Prob5 permit 10 match ip address Loop193 set metric 7 ! route-map Prob5 permit 20 ! ! ! ! ! ! ! ! ! --More--   R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/2 R2(config-if)#ip rip ? advertise Specify update interval authentication Authentication control receive advertisement reception send advertisement transmission triggered enable rfc2091 triggered rip v2-broadcast send ip broadcast v2 update R2(config-if)#ip rip triggered R2(config-if)#^Z R2# RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)# R3(config)#int s 1/2 R3(config-if)#ip rip tri R3(config-if)#ip rip triggered R3(config-if)#^Z R3#sh ip *Mar 1 03:09:34.685: %SYS-5-CONFIG_I: Configured from console by console R3#sh ip rip data 180.40.0.0/16 auto-summary 180.40.0.0/16 [4] via 208.28.1.1, 00:00:03, Serial1/0 [4] via 208.28.1.3, 00:00:26, Serial1/0 [4] via 180.40.7.2, 00:00:04 (permanent), Serial1/2 * Triggered Routes: - [4] via 180.40.7.2, Serial1/2 180.40.7.0/27 directly connected, Serial1/2 180.40.7.64/27 [1] via 208.28.1.3, 00:00:26, Serial1/0 [1] via 180.40.7.2, 00:00:04 (permanent), Serial1/2 * Triggered Routes: - [1] via 180.40.7.2, Serial1/2 208.28.1.0/24 auto-summary 208.28.1.0/24 [4] via 208.28.1.1, 00:00:03, Serial1/0 [4] via 208.28.1.3, 00:00:26, Serial1/0 [4] via 180.40.7.2, 00:00:04 (permanent), Serial1/2 * Triggered Routes: - [4] via 180.40.7.2, Serial1/2 208.28.1.0/29 directly connected, Serial1/0 * Triggered Routes: - [1] via 180.40.7.2, Serial1/2 --More--  208.28.1.64/28 [1] via 208.28.1.1, 00:00:08, Serial1/0 * Triggered Routes: - [4] via 180.40.7.2, Serial1/2 208.28.1.128/27 [1] via 208.28.1.3, 00:00:02, Serial1/0 [1] via 180.40.7.2, 00:00:09 (permanent), Serial1/2 * Triggered Routes: - [1] via 180.40.7.2, Serial1/2 208.28.1.193/32 [7] via 208.28.1.1, 00:00:08, Serial1/0 [7] via 208.28.1.3, 00:00:02, Serial1/0 [7] via 180.40.7.2, 00:00:09 (permanent), Serial1/2 * Triggered Routes: - [7] via 180.40.7.2, Serial1/2 208.28.1.194/32 [4] via 208.28.1.1, 00:00:08, Serial1/0 [4] via 208.28.1.3, 00:00:02, Serial1/0 [4] via 180.40.7.2, 00:00:09 (permanent), Serial1/2 * Triggered Routes: - [4] via 180.40.7.2, Serial1/2 R3#qshi  i     sh ip priot    ro Routing Protocol is "rip" Sending updates every 30 seconds, next due in 14 seconds Invalid after 180 seconds, hold down 0, flushed after 240 Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Redistributing: rip Neighbor(s): 208.28.1.3 208.28.1.1 Default version control: send version 2, receive version 2 Interface Send Recv Triggered RIP Key-chain Serial1/0 2 2 Serial1/2 2 2 Yes xxx Automatic network summarization is not in effect Maximum path: 4 Routing for Networks: 180.40.0.0 208.28.1.0 Routing Information Sources: Gateway Distance Last Update 180.40.7.2 120 00:00:17 208.28.1.1 120 00:00:16 208.28.1.3 120 00:00:10 --More--   R3# RACK14AS>2 [Resuming connection 2 to r2 ... ] * R2#sh run int s 1/2 Building configuration... Current configuration : 171 bytes ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 ip rip triggered ip rip authentication mode md5 ip rip authentication key-chain yyy clock rate 64000 end R2# R2# RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#sh run int s 1/2 Building configuration... Current configuration : 153 bytes ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 ip rip triggered ip rip authentication mode md5 ip rip authentication key-chain xxx end R3# R3# RACK14AS>2 [Resuming connection 2 to r2 ... ] R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#router rip R2(config-router)#? Router configuration commands: address-family Enter Address Family command mode auto-summary Enable automatic network number summarization default Set a command to its defaults default-information Control distribution of default information default-metric Set metric of redistributed routes distance Define an administrative distance distribute-list Filter networks in routing updates exit Exit from routing protocol configuration mode flash-update-threshold Specify flash update threshold in second help Description of the interactive help system input-queue Specify input queue depth maximum-paths Forward packets over multiple paths neighbor Specify a neighbor router network Enable routing on an IP network no Negate a command or set its defaults offset-list Add or subtract offset from RIP metrics output-delay Interpacket delay for RIP updates passive-interface Suppress routing updates on an interface redistribute Redistribute information from another routing protocol timers Adjust routing timers --More--   traffic-share How to compute traffic share over alternate paths validate-update-source Perform sanity checks against source address of routing updates version Set routing protocol version R2(config-router)#timers ? basic Basic routing protocol update timers R2(config-router)#timers        output-delay ? <8-50> Delay in milliseconds R2(config-router)#output-delay 10 R2(config-router)#tim R2(config-router)#timers b R2(config-router)#timers basic ? <0-4294967295> Interval between updates R2(config-router)#timers basic              ^Z R2# *Mar 1 03:13:14.077: %SYS-5-CONFIG_I: Configured from console by console R2#sh run | b router router eigrp 100 redistribute rip network 180.40.7.65 0.0.0.0 network 208.28.1.129 0.0.0.0 neighbor 180.40.7.66 Serial1/0.2 default-metric 128 2000 255 1 1500 auto-summary ! router rip version 2 timers basic 30 180 0 240 redistribute eigrp 100 route-map Prob5 passive-interface FastEthernet0/1 passive-interface Serial1/0.2 output-delay 10 network 180.40.0.0 network 208.28.1.0 neighbor 208.28.1.2 default-metric 4 distance 171 0.0.0.0 255.255.255.255 noLoops no auto-summary ! ip classless --More--   R2# RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#router rip R3(config-router)#no va R3(config-router)#no validate-update-source R3(config-router)#^Z R3# *Mar 1 03:15:53.682: %SYS-5-CONFIG_I: Configured from console by console R3#h sh run | b router router rip version 2 no validate-update-source timers basic 30 180 0 240 network 180.40.0.0 network 208.28.1.0 neighbor 208.28.1.3 neighbor 208.28.1.1 no auto-summary ! ip classless ! no ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! --More--   R3#sh ip proto Routing Protocol is "rip" Sending updates every 30 seconds, next due in 8 seconds Invalid after 180 seconds, hold down 0, flushed after 240 Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Redistributing: rip Neighbor(s): 208.28.1.3 208.28.1.1 Default version control: send version 2, receive version 2 Interface Send Recv Triggered RIP Key-chain Serial1/0 2 2 Serial1/2 2 2 Yes xxx Automatic network summarization is not in effect Maximum path: 4 Routing for Networks: 180.40.0.0 208.28.1.0 Routing Information Sources: Gateway Distance Last Update 180.40.7.2 120 00:07:18 208.28.1.1 120 00:00:15 208.28.1.3 120 00:00:13 --More--   Distance: (default is 120) R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#router rip R3(config-router)#max R3(config-router)#maximum-paths 3 R3(config-router)#^Z R3# *Mar 1 03:17:05.873: %SYS-5-CONFIG_I: Configured from console by console R3# RACK14AS>1 [Resuming connection 1 to r1 ... ] R1#conffi t ^ % Invalid input detected at '^' marker. R1#confi t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#t router rip R1(config-router)#max 3 R1(config-router)#^Z R1# RACK14AS>2 [Resuming connection 2 to r2 ... ] R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#roter   uter rip R2(config-router)#max 3 R2(config-router)#^Z R2# *Mar 1 03:17:24.804: %SYS-5-CONFIG_I: Configured from console by console R2#sh ip rou   proto Routing Protocol is "eigrp 100" Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Default networks flagged in outgoing updates Default networks accepted from incoming updates EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0 EIGRP maximum hopcount 100 EIGRP maximum metric variance 1 Default redistribution metric is 128 2000 255 1 1500 Redistributing: eigrp 100, rip EIGRP NSF-aware route hold timer is 240s Automatic network summarization is in effect Automatic address summarization: 208.28.1.0/24 for Serial1/0.2 Summarizing with metric 28160 180.40.0.0/16 for FastEthernet0/1 Summarizing with metric 20512000 Maximum path: 4 Routing for Networks: 180.40.7.65/32 208.28.1.129/32 Routing Information Sources: Gateway Distance Last Update --More--   Gateway Distance Last Update (this router) 90 00:17:12 208.28.1.130 90 00:17:12 180.40.7.66 90 00:00:13 Distance: internal 90 external 170 Routing Protocol is "rip" Sending updates every 30 seconds, next due in 25 seconds Invalid after 180 seconds, hold down 0, flushed after 240 Output delay 10 milliseconds between packets Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Default redistribution metric is 4 Redistributing: eigrp 100, rip Neighbor(s): 208.28.1.2 Default version control: send version 2, receive version 2 Interface Send Recv Triggered RIP Key-chain Serial1/0.1 2 2 Serial1/2 2 2 Yes yyy Automatic network summarization is not in effect Maximum path: 3 Routing for Networks: --More--   Interface Send Recv Triggered RIP Key-chain 180.40.0.0 208.28.1.0 Passive Interface(s): FastEthernet0/1 Serial1/0.2 Routing Information Sources: Gateway Distance Last Update 180.40.7.3 171 00:08:08 208.28.1.2 171 00:00:15 Distance: (default is 120) Address Wild mask Distance List 0.0.0.0 255.255.255.255 171 noLoops R2#sh run | b router rip router rip version 2 timers basic 30 180 0 240 redistribute eigrp 100 route-map Prob5 passive-interface FastEthernet0/1 passive-interface Serial1/0.2 output-delay 10 network 180.40.0.0 network 208.28.1.0 neighbor 208.28.1.2 maximum-paths 3 default-metric 4 distance 171 0.0.0.0 255.255.255.255 noLoops no auto-summary ! ip classless ! no ip http server no ip http secure-server ! ip access-list standard Loop193 permit 208.28.1.193 ip access-list standard noLoops --More--