=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2006.12.21 06:49:13 =~=~=~=~=~=~=~=~=~=~=~=   R2#kr? % Unrecognized command R2#kr  confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#k? kerberos key keymap kron R2(config)#keon ? % Unrecognized command R2(config)#keon on ron on ? occurrence Define the name, time, interval of kron occurrence policy-list Define the name and type of policy-list R2(config)#kron oc R2(config)#kron occurrence ? WORD The name of this occurrence R2(config)#kron occurrence                 ^Z R2# *Mar 1 17:02:53.615: %SYS-5-CONFIG_I: Configured from console by console R2# R2# RACK14AS> [Resuming connection 2 to r2 ... ] R2# R2# RACK14AS>1 [Resuming connection 1 to r1 ... ] * R1#confi rt  t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#router os[pf   pf 1 R1(config-router)#rout R1(config-router)#router-id 12.   1.1.1.1 R1(config-router)#net 17.57.100.1 0.0.0.0 area 0 R1(config-router)# RACK14AS>6 [Resuming connection 6 to r6 ... ] S6#confi t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#router ospf 1 S6(config-router)#rout S6(config-router)#router-id 6.6.6.6 S6(config-router)#net 17.57.100.2 0.0.0.0 area 0 S6(config-router)#^Z S6# RACK14AS>4 [Resuming connection 4 to r4 ... ] R4#confi t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#router osfp 1 ^ % Invalid input detected at '^' marker. R4(config)#router ospf 1 R4(config-router)#rout R4(config-router)#router-id 3.3.3.3 R4(config-router)#net 17.80.1.1 0.0.0.0 area 0 R4(config-router)#^Z R4# RACK14AS>confi      [Resuming connection 4 to r4 ... ] *M R4#confi t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#net 17.80.1.1 0.0.0.0 area 0router-id 3.3.3.3  ospf 1  R4(config-router)#router ospf 1net 17.80.1.1 0.0.0.0 area 01 0.0.0.0 area 0 2 0.0.0.0 area 0 R4(config-router)#net 17.80.1.2 0.0.0.0 area 0router ospf 1 net 17.80.1.1 0.0.0.0 area 0nnet 17.80.1.1 0.0.0.0 area 0onet 17.80.1.1 0.0.0.0 area 0 net 17.80.1.1 0.0.0.0 area 0 R4(config-router)#^Z R4# RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#confi r        RACK14AS>4 [Resuming connection 4 to r4 ... ] *Mar 1 18:01:56.639: R4#confi t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#no net 17.80.1.1 0.0.0.0 area 0et 17.80.1.2 0.0.0.0 area 0 router ospf 1  R4(config-router)#router ospf 1no net 17.80.1.1 0.0.0.0 area 0et 17.80.1.2 0.0.0.0 area 0 router ospf 1 net 17.80.1.1 0.0.0.0 area 0router-id 3.3.3.3        4.4.4.4 R4(config-router)#^Z R4# RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#router ospf 1 R3(config-router)#rout   R3(config-router)#router-id 3.3.3.3 R3(config-router)#net 17.80.1.1 0.0.0.0 area 0 R3(config-router)#^Z R3# *Mar 1 18:00:14.888: %SYS-5-CONFIG_I: Configured from console by console R3#sh ip ospf nei Neighbor ID Pri State Dead Time Address Interface 4.4.4.4 1 2WAY/DROTHER 00:00:38 17.80.1.2 FastEthernet0/0 R3# RACK14AS>1 [Resuming connection 1 to r1 ... ] *Ma R1(config-router)#^Z R1#sh ip *Mar 1 18:01:46.755: %SYS-5-CONFIG_I: Configured from console by consoleospf nei Neighbor ID Pri State Dead Time Address Interface 6.6.6.6 1 FULL/DR 00:00:31 17.57.100.2 Ethernet0/1 R1# R1# R1# R1# R1# R1#sh run | b ospf router ospf 1 router-id 1.1.1.1 log-adjacency-changes network 17.57.100.1 0.0.0.0 area 0 ! router rip version 2 redistribute eigrp 100 metric 4 passive-interface Ethernet0/0 offset-list Loop193 out 3 network 208.28.1.0 maximum-paths 3 distance 171 208.28.1.2 0.0.0.0 noLoops no auto-summary ! no ip http server ip classless ! ! ! ip access-list standard Loop193 permit 208.28.1.193 ip access-list standard noLoops --More--   R1# RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#sh run | *Mar 1 18:00:56.949: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on FastEthernet0/0 from LOADING to FULL, Loading Done R3#sh run | b ospf router ospf 1 router-id 3.3.3.3 log-adjacency-changes network 17.80.1.1 0.0.0.0 area 0 ! router rip version 2 no validate-update-source timers basic 30 180 0 240 network 180.40.0.0 network 208.28.1.0 neighbor 208.28.1.3 neighbor 208.28.1.1 maximum-paths 3 no auto-summary ! ip classless ! no ip http server no ip http secure-server ! ! ! --More-- RACK14AS>4 [Resuming connection 4 to r4 ... ] *M R4#sh run |b    b ospf router ospf 1 router-id 4.4.4.4 log-adjacency-changes network 17.80.1.2 0.0.0.0 area 0 ! no ip http server no ip http secure-server ip classless ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 ! ! --More-- RACK14AS>6 [Resuming connection 6 to r6 ... ] 18:0 S6#sh run | b ospf router ospf 1 router-id 6.6.6.6 log-adjacency-changes network 17.57.100.2 0.0.0.0 area 0 ! ip classless ip http server ip http secure-server ! ! ! control-plane ! ! line con 0 exec-timeout 0 0 line vty 0 4 login line vty 5 15 login ! ! end --More--   S6# RACK14AS>3 [Resuming connection 3 to r3 ... ]  ! --More--   R3#sh run | b ospf router ospf 1 router-id 3.3.3.3 log-adjacency-changes network 17.80.1.1 0.0.0.0 area 0 ! router rip version 2 no validate-update-source timers basic 30 180 0 240 network 180.40.0.0 network 208.28.1.0 neighbor 208.28.1.3 neighbor 208.28.1.1 maximum-paths 3 no auto-summary ! ip classless ! no ip http server no ip http secure-server ! ! ! --More--   R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int lo 0 R3(config-if)#ip add 222.1.1.3 255.255.5 255.0 R3(config-if)# R3(config-if)#router ri  rip R3(config-router)#net 222.1.1.0 R3(config-router)#int tu 0 R3(config-if)#tun sou *Mar 1 18:03:44.540: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down R3(config-if)#tun sou lo 0 R3(config-if)#tun dest 223.1.1.1 R3(config-if)#ke R3(config-if)#keepalive R3(config-if)#ip add 13.13.13.3 255.255.255.0 R3(config-if)#router ospf 1 R3(config-router)#net 13.13.13.3 0.0.0.0 area 0 R3(config-router)#\ ^Z R3# RACK14AS>1 [Resuming connection 1 to r1 ... ] R1#confi t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int lo 0 R1(config-if)#ip add 223.1.1.1 255.255.255.0 R1(config-if)#router i rip R1(config-router)#net 223.1.1.0 R1(config-router)#int tu 0 R1(config-if)#tun sou *Mar 1 18:06:14.057: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to downlo 0 R1(config-if)#tun s dest 222.1.1.3 R1(config-if)# *Mar 1 18:06:23.797: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to upkee R1(config-if)#ip add 13.13.13.1 2585  5.255.255.0 R1(config-if)#router ospf 1 R1(config-router)#net 13.13.013   13.1 0.0.0.0 area 0 R1(config-router)#^Z R1# *Mar 1 18:06:50.489: %SYS-5-CONFIG_I: Configured from console by console R1# R1# R1# R1#sh ip int brie Interface IP-Address OK? Method Status Protocol Ethernet0/0 208.28.1.66 YES manual up up Serial0/0 unassigned YES manual up up Serial0/0.1 208.28.1.1 YES manual up up Serial0/0.2 180.40.7.66 YES manual up up Ethernet0/1 17.57.100.1 YES manual up up Serial0/1 unassigned YES unset administratively down down Loopback0 223.1.1.1 YES manual up up Tunnel0 13.13.13.1 YES manual up up R1# *Mar 1 18:06:56.956: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Tunnel0 from LOADING to FULL, Loading Done R1# R1# R1#p 13.13.13.3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 13.13.13.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 72/72/73 ms R1#sh ip rout Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 2 subnets O 17.80.1.0 [110/11112] via 13.13.13.3, 00:00:07, Tunnel0 C 17.57.100.0 is directly connected, Ethernet0/1 R 222.1.1.0/24 [120/1] via 208.28.1.2, 00:00:15, Serial0/0.1 C 223.1.1.0/24 is directly connected, Loopback0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks D EX 208.28.1.193/32 [170/179200] via 208.28.1.65, 15:04:21, Ethernet0/0 D EX 208.28.1.194/32 [170/179200] via 208.28.1.65, 15:04:21, Ethernet0/0 D 208.28.1.128/27 [90/51456] via 208.28.1.65, 15:04:22, Ethernet0/0 C 208.28.1.64/28 is directly connected, Ethernet0/0 C 208.28.1.0/29 is directly connected, Serial0/0.1 D 208.28.1.0/24 is a summary, 15:04:22, Null0 13.0.0.0/24 is subnetted, 1 subnets --More--  C 13.13.13.0 is directly connected, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks R 180.40.7.0/27 [120/1] via 208.28.1.2, 00:00:19, Serial0/0.1 D 180.40.0.0/16 is a summary, 15:04:25, Null0 C 180.40.7.64/27 is directly connected, Serial0/0.2 R1# RACK14AS>6 [Resuming connection 6 to r6 ... ] S6#pin 17.80. % Unrecognized host or address, or protocol not running. S6#pin 17.80.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 17.80.1.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 68/71/72 ms S6# S6# S6# S6# S6# RACK14AS>1 [Resuming connection 1 to r1 ... ] R1#sh run | b Lo interface Loopback0 ip address 223.1.1.1 255.255.255.0 ! interface Tunnel0 ip address 13.13.13.1 255.255.255.0 keepalive 10 3 tunnel source Loopback0 tunnel destination 222.1.1.3 ! interface Ethernet0/0 bandwidth 100000 ip address 208.28.1.66 255.255.255.240 half-duplex ! interface Serial0/0 no ip address encapsulation frame-relay ! interface Serial0/0.1 point-to-point ip address 208.28.1.1 255.255.255.248 frame-relay interface-dlci 103 ! interface Serial0/0.2 point-to-point --More--   bandwidth 128 ip address 180.40.7.66 255.255.255.224 frame-relay interface-dlci 102 ! interface Ethernet0/1 ip address 17.57.100.1 255.255.255.0 half-duplex ! interface Serial0/1 no ip address shutdown ! router eigrp 100 redistribute rip metric 128 2000 255 1 1500 network 180.40.7.66 0.0.0.0 network 208.28.1.66 0.0.0.0 neighbor 180.40.7.65 Serial0/0.2 auto-summary ! router ospf 1 router-id 1.1.1.1 log-adjacency-changes network 13.13.13.1 0.0.0.0 area 0 --More--   network 17.57.100.1 0.0.0.0 area 0 --More--  ! --More--  router rip --More--   version 2 --More--   redistribute eigrp 100 metric 4 --More--   passive-interface Ethernet0/0 --More--   offset-list Loop193 out 3 --More--   network 208.28.1.0 --More--   network 223.1.1.0 --More--   maximum-paths 3 --More--   distance 171 208.28.1.2 0.0.0.0 noLoops --More--   no auto-summary --More--  ! --More--  no ip http server --More--  ip classless --More--  ! --More-- RACK14AS>3 [Resuming connection 3 to r3 ... ] *Ma R3#sh run | b Lo interface Loopback0 ip address 222.1.1.3 255.255.255.0 ! interface Tunnel0 ip address 13.13.13.3 255.255.255.0 keepalive 10 3 tunnel source Loopback0 tunnel destination 223.1.1.1 ! interface FastEthernet0/0 ip address 17.80.1.1 255.255.255.0 duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto --More--  ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay frame-relay map ip 208.28.1.1 301 frame-relay map ip 208.28.1.3 302 no frame-relay inverse-arp ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 ip rip triggered ip rip authentication mode md5 ip rip authentication key-chain xxx ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 --More--   no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 router-id 3.3.3.3 log-adjacency-changes network 13.13.13.3 0.0.0.0 area 0 network 17.80.1.1 0.0.0.0 area 0 ! router rip version 2 --More--   no validate-update-source timers basic 30 180 0 240 network 180.40.0.0 network 208.28.1.0 network 222.1.1.0 neighbor 208.28.1.3 neighbor 208.28.1.1 maximum-paths 3 no auto-summary ! ip classless ! no ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! --More--  ! --More--  line con 0 --More--   exec-timeout 0 0 --More--   R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#router ospf 12 R3(config-router)#router ospf 12nrouter ospf 12orouter ospf 12 router ospf 12 R3(config)#no router ospf 12router ospf 12   R3(config-router)#red R3(config-router)#redistribute rip su R3(config-router)#redistribute rip subnets ? metric Metric for redistributed routes metric-type OSPF/IS-IS exterior metric type for redistributed routes route-map Route map reference tag Set tag for routes redistributed into OSPF R3(config-router)#redistribute rip subnets R3(config-router)#router rip R3(config-router)#redi R3(config-router)#redistribute osp R3(config-router)#redistribute ospf 1 me R3(config-router)#redistribute ospf 1 metric 6 R3(config-router)#^Z R3# RACK14AS>1 [Resuming connection 1 to r1 ... ] * ! --More--   R1#etetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetet$tetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetete tetetetet tetetetet tetetetet tetetetet tetetetet tetetetet te Translating "etetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetete" Translating "etetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetetete" % Unknown command or computer name, or unable to find computer address R1# R1# R1# R1# R1# R1#confi t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#router ospf 1 R1(config-router)#redis R1(config-router)#redistribute rip su R1(config-router)#redistribute rip subnets R1(config-router)#redistribute rip subnets             ei R1(config-router)#redistribute eigrp 100 su R1(config-router)#redistribute eigrp 100 subnets R1(config-router)#router eigrp 100 R1(config-router)#redi ospf 1 met R1(config-router)#redi ospf 1 metric 100000 100 255 1 1500 R1(config-router)#router rip R1(config-router)#redis ospf 1 me 6 R1(config-router)#^Z R1# *Mar 1 18:11:30.544: %SYS-5-CONFIG_I: Configured from console by console R1# R1# R1# R1# R1# R1# R1#sh *Mar 1 18:11:34.066: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to upip *Mar 1 18:11:37.175: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Tunnel0 from LOADING to FULL, Loading Doneroute Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 2 subnets R 17.80.1.0 [120/6] via 208.28.1.2, 00:00:00, Serial0/0.1 C 17.57.100.0 is directly connected, Ethernet0/1 R 222.1.1.0/24 [120/1] via 208.28.1.2, 00:00:00, Serial0/0.1 C 223.1.1.0/24 is directly connected, Loopback0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks D EX 208.28.1.193/32 [170/179200] via 208.28.1.65, 00:01:15, Ethernet0/0 D EX 208.28.1.194/32 [170/179200] via 208.28.1.65, 00:01:15, Ethernet0/0 D 208.28.1.128/27 [90/51456] via 208.28.1.65, 15:08:50, Ethernet0/0 C 208.28.1.64/28 is directly connected, Ethernet0/0 C 208.28.1.0/29 is directly connected, Serial0/0.1 D 208.28.1.0/24 is a summary, 15:08:50, Null0 13.0.0.0/24 is subnetted, 1 subnets --More--  C 13.13.13.0 is directly connected, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks R 180.40.7.0/27 [120/1] via 208.28.1.2, 00:00:03, Serial0/0.1 D 180.40.0.0/16 is a summary, 15:08:52, Null0 C 180.40.7.64/27 is directly connected, Serial0/0.2 R1#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 2 subnets R 17.80.1.0 [120/6] via 208.28.1.2, 00:00:13, Serial0/0.1 C 17.57.100.0 is directly connected, Ethernet0/1 R 222.1.1.0/24 [120/1] via 208.28.1.2, 00:00:13, Serial0/0.1 C 223.1.1.0/24 is directly connected, Loopback0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks D EX 208.28.1.193/32 [170/179200] via 208.28.1.65, 00:01:28, Ethernet0/0 D EX 208.28.1.194/32 [170/179200] via 208.28.1.65, 00:01:28, Ethernet0/0 D 208.28.1.128/27 [90/51456] via 208.28.1.65, 15:09:03, Ethernet0/0 C 208.28.1.64/28 is directly connected, Ethernet0/0 C 208.28.1.0/29 is directly connected, Serial0/0.1 D 208.28.1.0/24 is a summary, 15:09:03, Null0 13.0.0.0/24 is subnetted, 1 subnets --More--  C 13.13.13.0 is directly connected, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks R 180.40.7.0/27 [120/1] via 208.28.1.2, 00:00:14, Serial0/0.1 D 180.40.0.0/16 is a summary, 15:09:03, Null0 C 180.40.7.64/27 is directly connected, Serial0/0.2 R1#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 2 subnets R 17.80.1.0 [120/6] via 208.28.1.2, 00:00:16, Serial0/0.1 C 17.57.100.0 is directly connected, Ethernet0/1 R 222.1.1.0/24 [120/1] via 208.28.1.2, 00:00:16, Serial0/0.1 C 223.1.1.0/24 is directly connected, Loopback0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks D EX 208.28.1.193/32 [170/179200] via 208.28.1.65, 00:01:31, Ethernet0/0 D EX 208.28.1.194/32 [170/179200] via 208.28.1.65, 00:01:31, Ethernet0/0 D 208.28.1.128/27 [90/51456] via 208.28.1.65, 15:09:06, Ethernet0/0 C 208.28.1.64/28 is directly connected, Ethernet0/0 C 208.28.1.0/29 is directly connected, Serial0/0.1 D 208.28.1.0/24 is a summary, 15:09:06, Null0 13.0.0.0/24 is subnetted, 1 subnets --More--  C 13.13.13.0 is directly connected, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks R 180.40.7.0/27 [120/1] via 208.28.1.2, 00:00:17, Serial0/0.1 D 180.40.0.0/16 is a summary, 15:09:06, Null0 C 180.40.7.64/27 is directly connected, Serial0/0.2 R1#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 2 subnets R 17.80.1.0 [120/6] via 208.28.1.2, 00:00:18, Serial0/0.1 C 17.57.100.0 is directly connected, Ethernet0/1 R 222.1.1.0/24 [120/1] via 208.28.1.2, 00:00:18, Serial0/0.1 C 223.1.1.0/24 is directly connected, Loopback0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks D EX 208.28.1.193/32 [170/179200] via 208.28.1.65, 00:01:33, Ethernet0/0 D EX 208.28.1.194/32 [170/179200] via 208.28.1.65, 00:01:33, Ethernet0/0 D 208.28.1.128/27 [90/51456] via 208.28.1.65, 15:09:08, Ethernet0/0 C 208.28.1.64/28 is directly connected, Ethernet0/0 C 208.28.1.0/29 is directly connected, Serial0/0.1 D 208.28.1.0/24 is a summary, 15:09:08, Null0 13.0.0.0/24 is subnetted, 1 subnets --More--  C 13.13.13.0 is directly connected, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks R 180.40.7.0/27 [120/1] via 208.28.1.2, 00:00:20, Serial0/0.1 D 180.40.0.0/16 is a summary, 15:09:09, Null0 C 180.40.7.64/27 is directly connected, Serial0/0.2 R1#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 2 subnets R 17.80.1.0 [120/6] via 208.28.1.2, 00:00:21, Serial0/0.1 C 17.57.100.0 is directly connected, Ethernet0/1 R 222.1.1.0/24 [120/1] via 208.28.1.2, 00:00:21, Serial0/0.1 C 223.1.1.0/24 is directly connected, Loopback0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks D EX 208.28.1.193/32 [170/179200] via 208.28.1.65, 00:01:36, Ethernet0/0 D EX 208.28.1.194/32 [170/179200] via 208.28.1.65, 00:01:36, Ethernet0/0 D 208.28.1.128/27 [90/51456] via 208.28.1.65, 15:09:11, Ethernet0/0 C 208.28.1.64/28 is directly connected, Ethernet0/0 C 208.28.1.0/29 is directly connected, Serial0/0.1 D 208.28.1.0/24 is a summary, 15:09:11, Null0 13.0.0.0/24 is subnetted, 1 subnets --More--  C 13.13.13.0 is directly connected, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks R 180.40.7.0/27 [120/1] via 208.28.1.2, 00:00:23, Serial0/0.1 D 180.40.0.0/16 is a summary, 15:09:11, Null0 C 180.40.7.64/27 is directly connected, Serial0/0.2 R1#sh ip int brie Interface IP-Address OK? Method Status Protocol Ethernet0/0 208.28.1.66 YES manual up up Serial0/0 unassigned YES manual up up Serial0/0.1 208.28.1.1 YES manual up up Serial0/0.2 180.40.7.66 YES manual up up Ethernet0/1 17.57.100.1 YES manual up up Serial0/1 unassigned YES unset administratively down down Loopback0 223.1.1.1 YES manual up up Tunnel0 13.13.13.1 YES manual up up R1#sh ip rout eospf Translating "eospf" ^ % Invalid input detected at '^' marker. R1#sh ip rout eospfospf  R1# RACK14AS>3 [Resuming connection 3 to r3 ... ] * R3# R3# R3# R3# R3#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 17.0.0.0/24 is subnetted, 2 subnets C 17.80.1.0 is directly connected, FastEthernet0/0 R 17.57.100.0 [120/4] via 180.40.7.2, 00:00:32, Serial1/2 [120/4] via 208.28.1.3, 00:00:17, Serial1/0 C 222.1.1.0/24 is directly connected, Loopback0 R 223.1.1.0/24 [120/1] via 208.28.1.1, 00:00:15, Serial1/0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks R 208.28.1.193/32 [120/7] via 208.28.1.3, 00:00:17, Serial1/0 [120/7] via 208.28.1.1, 00:00:15, Serial1/0 R 208.28.1.194/32 [120/4] via 208.28.1.3, 00:00:18, Serial1/0 [120/4] via 208.28.1.1, 00:00:16, Serial1/0 R 208.28.1.128/27 [120/1] via 208.28.1.3, 00:00:18, Serial1/0 R 208.28.1.64/28 [120/1] via 208.28.1.1, 00:00:16, Serial1/0 --More--  C 208.28.1.0/29 is directly connected, Serial1/0 R 208.28.1.0/24 [120/4] via 208.28.1.3, 00:00:18, Serial1/0 [120/4] via 208.28.1.1, 00:00:17, Serial1/0 13.0.0.0/24 is subnetted, 1 subnets R 13.13.13.0 [120/4] via 180.40.7.2, 00:00:33, Serial1/2 [120/4] via 208.28.1.3, 00:00:18, Serial1/0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks C 180.40.7.0/27 is directly connected, Serial1/2 R 180.40.0.0/16 [120/4] via 208.28.1.3, 00:00:18, Serial1/0 [120/4] via 208.28.1.1, 00:00:17, Serial1/0 R 180.40.7.64/27 [120/1] via 208.28.1.3, 00:00:18, Serial1/0 R3#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 17.80.1.1 YES manual up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 208.28.1.2 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.3 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--  Serial1/6 unassigned YES unset administratively down down Serial1/7 unassigned YES unset administratively down down Loopback0 222.1.1.3 YES manual up up Tunnel0 13.13.13.3 YES manual up down R3# *Mar 1 18:11:44.559: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to up R3#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 17.80.1.1 YES manual up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 208.28.1.2 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.3 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--   R3#sh ip route ospf R3# *Mar 1 18:11:52.508: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Tunnel0 from LOADING to FULL, Loading Done R3#sh ip route ospf R3#sh ip route ospf R3#sh ip route ospf R3#sh ip route ospf R3#sh ip route ospf R3#sh ip route ospf R3#sh ip route ospf R3#sh ip route ospf R3#sh ip route ospf R3#sh ip route ospf R3#sh ip route ospf 17.0.0.0/24 is subnetted, 2 subnets O 17.57.100.0 [110/11121] via 13.13.13.1, 00:00:00, Tunnel0 O E2 223.1.1.0/24 [110/20] via 13.13.13.1, 00:00:00, Tunnel0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks O E2 208.28.1.193/32 [110/20] via 13.13.13.1, 00:00:00, Tunnel0 O E2 208.28.1.194/32 [110/20] via 13.13.13.1, 00:00:00, Tunnel0 O E2 208.28.1.128/27 [110/20] via 13.13.13.1, 00:00:00, Tunnel0 O E2 208.28.1.64/28 [110/20] via 13.13.13.1, 00:00:00, Tunnel0 O E2 208.28.1.0/24 [110/20] via 13.13.13.1, 00:00:00, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks O E2 180.40.0.0/16 [110/20] via 13.13.13.1, 00:00:00, Tunnel0 O E2 180.40.7.64/27 [110/20] via 13.13.13.1, 00:00:00, Tunnel0 R3#sh ip route ospf *Mar 1 18:12:03.558: %TUN-5-RECURDOWN: Tunnel0 temporarily disabled due to recursive routing *Mar 1 18:12:04.560: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down *Mar 1 18:12:04.560: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Tunnel0 from FULL to DOWN, Neighbor Down: Interface down or detached R3#sh ip route ospf *Mar 1 18:13:14.562: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to up R3#sh ip route ospf *Mar 1 18:13:22.495: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Tunnel0 from LOADING to FULL, Loading Done R3#sh ip route ospf R3# R3# R3# R3# *Mar 1 18:13:33.561: %TUN-5-RECURDOWN: Tunnel0 temporarily disabled due to recursive routing *Mar 1 18:13:34.563: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down *Mar 1 18:13:34.563: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Tunnel0 from FULL to DOWN, Neighbor Down: Interface down or detached R3# R3# R3# R3# *Mar 1 18:14:44.566: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to up R3# *Mar 1 18:14:55.143: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Tunnel0 from LOADING to FULL, Loading Done R3# *Mar 1 18:15:03.565: %TUN-5-RECURDOWN: Tunnel0 temporarily disabled due to recursive routing *Mar 1 18:15:04.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down *Mar 1 18:15:04.567: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Tunnel0 from FULL to DOWN, Neighbor Down: Interface down or detached R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#p ip pri R3(config)#ip pri  R3(config)#ip prefix-list Prob11 2 den 223.1.1.0/ *Mar 1 18:16:14.569: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to up R3(config)#ip prefix-list Prob12 den 223.1.1.0/24 R3(config)#ip prefix-list Prob12 den 223.1.1.0/24                per 0.0.0.0/0 *Mar 1 18:16:22.514: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Tunnel0 from LOADING to FULL, Loading Done R3(config)#ip prefix-list Prob12 per 0.0.0.0/0 le 32 R3(config)#or  router ospf 1 R3(config-router)# *Mar 1 18:16:33.569: %TUN-5-RECURDOWN: Tunnel0 temporarily disabled due to recursive routing *Mar 1 18:16:34.570: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down *Mar 1 18:16:34.570: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Tunnel0 from FULL to DOWN, Neighbor Down: Interface down or detached R3(config-router)# *Mar 1 18:17:44.573: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to up R3(config-router)# *Mar 1 18:17:55.186: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Tunnel0 from LOADING to FULL, Loading Done R3(config-router)#distr R3(config-router)#distribute-list p R3(config-router)#distribute-list prefix *Mar 1 18:18:03.572: %TUN-5-RECURDOWN: Tunnel0 temporarily disabled due to recursive routing *Mar 1 18:18:04.574: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down *Mar 1 18:18:04.574: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Tunnel0 from FULL to DOWN, Neighbor Down: Interface down or detached R3(config-router)#distribute-list prefix Prob12 in tun 0 R3(config-router)#^Z R3# *Mar 1 18:18:20.444: %SYS-5-CONFIG_I: Configured from console by console R3# R3# R3# R3# R3#confi tsh ip route ospf R3#sh ip route ospfconfi t sh ip route ospfint brie  Interface IP-Address OK? Method Status Protocol FastEthernet0/0 17.80.1.1 YES manual up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 208.28.1.2 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.3 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--  Serial1/6 unassigned YES unset administratively down down Serial1/7 unassigned YES unset administratively down down Loopback0 222.1.1.3 YES manual up up Tunnel0 13.13.13.3 YES manual up down R3#sh ip int brie sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 17.80.1.1 YES manual up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 208.28.1.2 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.3 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--  Serial1/6 unassigned YES unset administratively down down Serial1/7 unassigned YES unset administratively down down Loopback0 222.1.1.3 YES manual up up Tunnel0 13.13.13.3 YES manual up down R3# R3# R3# R3# R3# R3# R3# R3#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 17.80.1.1 YES manual up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 208.28.1.2 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.3 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--  Serial1/6 unassigned YES unset administratively down down Serial1/7 unassigned YES unset administratively down down Loopback0 222.1.1.3 YES manual up up Tunnel0 13.13.13.3 YES manual up down R3#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 17.80.1.1 YES manual up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 208.28.1.2 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.3 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset *Mar 1 18:19:14.576: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to up administratively down down --More--  Serial1/6 unassigned YES unset administratively down down Serial1/7 unassigned YES unset administratively down down Loopback0 222.1.1.3 YES manual up up Tunnel0 13.13.13.3 YES manual up up R3# R3# R3# R3# R3# *Mar 1 18:19:22.521: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Tunnel0 from LOADING to FULL, Loading Done R3#sh ip int brieroute ospf 17.0.0.0/24 is subnetted, 2 subnets O 17.57.100.0 [110/11121] via 13.13.13.1, 00:00:25, Tunnel0 208.28.1.0/24 is variably subnetted, 6 subnets, 5 masks O E2 208.28.1.193/32 [110/20] via 13.13.13.1, 00:00:25, Tunnel0 O E2 208.28.1.194/32 [110/20] via 13.13.13.1, 00:00:25, Tunnel0 O E2 208.28.1.128/27 [110/20] via 13.13.13.1, 00:00:25, Tunnel0 O E2 208.28.1.64/28 [110/20] via 13.13.13.1, 00:00:25, Tunnel0 O E2 208.28.1.0/24 [110/20] via 13.13.13.1, 00:00:25, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks O E2 180.40.0.0/16 [110/20] via 13.13.13.1, 00:00:25, Tunnel0 O E2 180.40.7.64/27 [110/20] via 13.13.13.1, 00:00:25, Tunnel0 R3# R3# R3# R3# R3# RACK14AS>1 [Resuming connection 1 to r1 ... ] *Ma R1#sh ip rout ou spf R1#sh ip rout ospf R1#sh ip rout ospf R1#confit     t Enter configuration commands, one per line. End with CNTL/Z. R1(config)# R1(config)#access      ip access-list st R3Loop R1(config-std-nacl)#per 222.1.1.0 R1(config-std-nacl)#router sofp 1 ^ % Invalid input detected at '^' marker. R1(config)# *Mar 1 18:22:04.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to uprouter ospf 1 R1(config-router)#distr R1(config-router)#distribute-list *Mar 1 18:22:07.296: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Tunnel0 from LOADING to FULL, Loading Done  R1(config-router)#distribute-list                ista R1(config-router)#distance ? <1-255> Administrative distance ospf OSPF distance R1(config-router)#distance 255 ? A.B.C.D IP Source address R1(config-router)#distance 255 *Mar 1 18:22:23.090: %TUN-5-RECURDOWN: Tunnel0 temporarily disabled due to recursive routing *Mar 1 18:22:24.092: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down *Mar 1 18:22:24.092: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Tunnel0 from FULL to DOWN, Neighbor Down: Interface down or detached3.3.3.                    R1(config-router)# R1(config-router)# R1(config-router)# R1(config-router)# R1(config-router)#line con 0 R1(config-line)#logg sync R1(config-line)#router ospf 1 R1(config-router)# R1(config-router)# R1(config-router)# R1(config-router)# R1(config-router)#dista R1(config-router)#distance 255 ? A.B.C.D IP Source address R1(config-router)#distance 255 3.3.3.3 0 ? A.B.C.D Wildcard bits R1(config-router)#distance 255 3.3.3.3 0.0.0.0 ? <1-99> IP Standard access list number <1300-1999> IP Standard expanded access list number WORD Standard access-list name R1(config-router)#distance 255 3.3.3.3 0.0.0.0 R3Loop R1(config-router)#^Z R1# *Mar 1 18:23:13.224: %SYS-5-CONFIG_I: Configured from console by console R1#sh ip proto Routing Protocol is "eigrp 100" Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Default networks flagged in outgoing updates Default networks accepted from incoming updates EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0 EIGRP maximum hopcount 100 EIGRP maximum metric variance 1 Redistributing: eigrp 100, rip, ospf 1 (internal, external 1 & 2, nssa-external 1 & 2) EIGRP NSF-aware route hold timer is 240s Automatic network summarization is in effect Automatic address summarization: 208.28.1.0/24 for Serial0/0.2 Summarizing with metric 51200 180.40.0.0/16 for Ethernet0/0 Summarizing with metric 20512000 Maximum path: 4 Routing for Networks: 180.40.7.66/32 208.28.1.66/32 Routing Information Sources: --More--   Gateway Distance Last Update (this router) 90 00:00:56 208.28.1.65 90 00:00:33 180.40.7.65 90 00:00:14 Distance: internal 90 external 170 Routing Protocol is "rip" Sending updates every 30 seconds, next due in 19 seconds Invalid after 180 seconds, hold down 180, flushed after 240 Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Outgoing routes will have 3 added to metric if on list Loop193 Redistributing: eigrp 100, rip, ospf 1 (internal, external 1 & 2, nssa-external 1 & 2) Default version control: send version 2, receive version 2 Interface Send Recv Triggered RIP Key-chain Serial0/0.1 2 2 Loopback0 2 2 Automatic network summarization is not in effect Maximum path: 3 Routing for Networks: 208.28.1.0 --More--   Interface Send Recv Triggered RIP Key-chain 223.1.1.0 Passive Interface(s): Ethernet0/0 Routing Information Sources: Gateway Distance Last Update 208.28.1.2 171 00:00:02 Distance: (default is 120) Address Wild mask Distance List 208.28.1.2 0.0.0.0 171 noLoops Routing Protocol is "ospf 1" Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Router ID 1.1.1.1 It is an autonomous system boundary router Redistributing External Routes from, eigrp 100, includes subnets in redistribution rip, includes subnets in redistribution Number of areas in this router is 1. 1 normal 0 stub 0 nssa Maximum path: 4 Routing for Networks: 13.13.13.1 0.0.0.0 area 0 --More-- *Mar 1 18:23:34.094: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to up --More-- *Mar 1 18:23:37.300: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on Tunnel0 from LOADING to FULL, Loading Done --More--   R1#sh ip protoconf t sh ip rout ospf 17.0.0.0/24 is subnetted, 2 subnets O 17.80.1.0 [110/11112] via 13.13.13.3, 00:00:08, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks O E2 180.40.7.0/27 [110/20] via 13.13.13.3, 00:00:08, Tunnel0 R1#sh ip rout ospf 17.0.0.0/24 is subnetted, 2 subnets O 17.80.1.0 [110/11112] via 13.13.13.3, 00:00:10, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks O E2 180.40.7.0/27 [110/20] via 13.13.13.3, 00:00:10, Tunnel0 R1#sh ip rout ospf 17.0.0.0/24 is subnetted, 2 subnets O 17.80.1.0 [110/11112] via 13.13.13.3, 00:00:11, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks O E2 180.40.7.0/27 [110/20] via 13.13.13.3, 00:00:11, Tunnel0 R1#sh ip rout ospf 17.0.0.0/24 is subnetted, 2 subnets O 17.80.1.0 [110/11112] via 13.13.13.3, 00:00:15, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks O E2 180.40.7.0/27 [110/20] via 13.13.13.3, 00:00:15, Tunnel0 R1#sh ip rout ospf 17.0.0.0/24 is subnetted, 2 subnets O 17.80.1.0 [110/11112] via 13.13.13.3, 00:00:16, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks O E2 180.40.7.0/27 [110/20] via 13.13.13.3, 00:00:16, Tunnel0 R1#sh ip rout ospf 17.0.0.0/24 is subnetted, 2 subnets O 17.80.1.0 [110/11112] via 13.13.13.3, 00:01:14, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks O E2 180.40.7.0/27 [110/20] via 13.13.13.3, 00:01:14, Tunnel0 R1#sh ip rout ospf 17.0.0.0/24 is subnetted, 2 subnets O 17.80.1.0 [110/11112] via 13.13.13.3, 00:01:16, Tunnel0 180.40.0.0/16 is variably subnetted, 3 subnets, 2 masks O E2 180.40.7.0/27 [110/20] via 13.13.13.3, 00:01:16, Tunnel0 R1# R1# R1# R1# R1#sh run | b router router eigrp 100 redistribute rip metric 128 2000 255 1 1500 redistribute ospf 1 metric 100000 100 255 1 1500 network 180.40.7.66 0.0.0.0 network 208.28.1.66 0.0.0.0 neighbor 180.40.7.65 Serial0/0.2 auto-summary ! router ospf 1 router-id 1.1.1.1 log-adjacency-changes redistribute eigrp 100 subnets redistribute rip subnets network 13.13.13.1 0.0.0.0 area 0 network 17.57.100.1 0.0.0.0 area 0 distance 255 3.3.3.3 0.0.0.0 R3Loop ! router rip version 2 redistribute eigrp 100 metric 4 redistribute ospf 1 metric 6 passive-interface Ethernet0/0 offset-list Loop193 out 3 --More--   network 208.28.1.0 network 223.1.1.0 maximum-paths 3 distance 171 208.28.1.2 0.0.0.0 noLoops no auto-summary ! no ip http server ip classless ! ! ! ip access-list standard Loop193 permit 208.28.1.193 ip access-list standard R3Loop permit 222.1.1.0 ip access-list standard noLoops permit 208.28.1.193 permit 208.28.1.194 ! ! ! ! ! --More--   R1# RACK14AS>3 [Resuming connection 3 to r3 ... ] *M R3#sh run | b router router ospf 1 router-id 3.3.3.3 log-adjacency-changes redistribute rip subnets network 13.13.13.3 0.0.0.0 area 0 network 17.80.1.1 0.0.0.0 area 0 distribute-list prefix Prob12 in Tunnel0 ! router rip version 2 no validate-update-source timers basic 30 180 0 240 redistribute ospf 1 metric 6 network 180.40.0.0 network 208.28.1.0 network 222.1.1.0 neighbor 208.28.1.3 neighbor 208.28.1.1 maximum-paths 3 no auto-summary ! ip classless ! --More--  no ip http server no ip http secure-server ! ! ip prefix-list Prob12 seq 5 deny 223.1.1.0/24 ip prefix-list Prob12 seq 10 permit 0.0.0.0/0 le 32 ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 ! ! end --More--   R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#tim R3(config)#time-range ? WORD Time range name R3(config)#time-range Prob21  14 R3(config-time-range)#per R3(config-time-range)#periodic ? Friday Friday Monday Monday Saturday Saturday Sunday Sunday Thursday Thursday Tuesday Tuesday Wednesday Wednesday daily Every day of the week weekdays Monday thru Friday weekend Saturday and Sunday R3(config-time-range)#periodic we R3(config-time-range)#periodic week R3(config-time-range)#periodic weekd R3(config-time-range)#periodic weekdays ? hh:mm Starting time R3(config-time-range)#periodic weekdays 17:: 00 ? to ending day and time R3(config-time-range)#periodic weekdays 17:00 to ? hh:mm Ending time - stays valid until beginning of next minute R3(config-time-range)#periodic weekdays 17:00 to 24:00 ^ % Invalid input detected at '^' marker. R3(config-time-range)#periodic weekdays 17:00 to 24:00    3:59 R3(config-time-range)#periodic weekdays 17:00 to 23:59              0:00 to 8:00 R3(config-time-range)#per ? Friday Friday Monday Monday Saturday Saturday Sunday Sunday Thursday Thursday Tuesday Tuesday Wednesday Wednesday daily Every day of the week weekdays Monday thru Friday weekend Saturday and Sunday R3(config-time-range)#per sa R3(config-time-range)#per saturday ? Friday Friday Monday Monday Sunday Sunday Thursday Thursday Tuesday Tuesday Wednesday Wednesday hh:mm Starting time R3(config-time-range)#per saturday 0:00 to 23:59 R3(config-time-range)#per saturday 0:00 to 23:59day 0:00 to 23:59 day 0:00 to 23:59 day 0:00 to 23:59 day 0:00 to 23:59 day 0:00 to 23:59 sday 0:00 to 23:59uday 0:00 to 23:59nday 0:00 to 23:59 R3(config-time-range)#exit R3(config)#ip access-list ex R3(config)#ip access-list extended Prob14 R3(config-ext-nacl)#den ospf any any tim Prob14 R3(config-ext-nacl)#per ip any any R3(config-ext-nacl)#^Z R3# *Mar 1 18:36:14.196: %SYS-5-CONFIG_I: Configured from console by console R3#shg run        run | b time service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! boot-start-marker boot-end-marker ! ! no network-clock-participate slot 1 no network-clock-participate wic 0 no aaa new-model ip subnet-zero ! ! ! ip cef no ip domain lookup ip audit po max-events 100 ! ! key chain xxx --More--   key 1 --More--   key-string cisco ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 222.1.1.3 255.255.255.0 ! --More--  interface Tunnel0 ip address 13.13.13.3 255.255.255.0 keepalive 10 3 tunnel source Loopback0 tunnel destination 223.1.1.1 ! interface FastEthernet0/0 ip address 17.80.1.1 255.255.255.0 duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 208.28.1.2 255.255.255.248 --More--   encapsulation frame-relay frame-relay map ip 208.28.1.1 301 frame-relay map ip 208.28.1.3 302 no frame-relay inverse-arp ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 ip rip triggered ip rip authentication mode md5 ip rip authentication key-chain xxx ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! --More--  interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 router-id 3.3.3.3 log-adjacency-changes redistribute rip subnets network 13.13.13.3 0.0.0.0 area 0 network 17.80.1.1 0.0.0.0 area 0 distribute-list prefix Prob12 in Tunnel0 ! router rip version 2 no validate-update-source --More--   timers basic 30 180 0 240 redistribute ospf 1 metric 6 network 180.40.0.0 network 208.28.1.0 network 222.1.1.0 neighbor 208.28.1.3 neighbor 208.28.1.1 maximum-paths 3 no auto-summary ! ip classless ! no ip http server no ip http secure-server ! ip access-list extended Prob14 deny ospf any any time-range Prob14 permit ip any any ! ! ip prefix-list Prob12 seq 5 deny 223.1.1.0/24 ip prefix-list Prob12 seq 10 permit 0.0.0.0/0 le 32 ! --More--  ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 ! time-range Prob14 periodic weekdays 17:00 to 23:59 periodic weekdays 0:00 to 8:00 periodic Saturday 0:00 to 23:59 periodic Sunday 0:00 to 23:59 ! ! end R3#      confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int tun 0 R3(config-if)#ip acc R3(config-if)#ip acces R3(config-if)#ip access-group Prob14 i n ^ % Invalid input detected at '^' marker. R3(config-if)#ip access-group Prob14 i nn  R3(config-if)#^Z R3#sh acces *Mar 1 18:38:47.712: %SYS-5-CONFIG_I: Configured from console by console R3#sh access-list Extended IP access list Prob14 10 deny ospf any any time-range Prob14 (active) (3 matches) 20 permit ip any any (3 matches) R3# *Mar 1 18:38:52.043: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Tunnel0 from FULL to DOWN, Neighbor Down: Dead timer expired R3#sh clock *18:39:14.744 UTC Mon Mar 1 1993 R3# RACK14AS>4 [Resuming connection 4 to r4 ... ]  end --More--   R4#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 17.80.1.2 YES manual up up ATM1/0 unassigned YES unset administratively down down R4# R4# R4# R4# R4# RACK14AS>3 [Resuming connection 3 to r3 ... ] R3#set     clco  ock set ? hh:mm:ss Current Time R3#clock set 10:30  :00 ? <1-31> Day of the month MONTH Month of the year R3#clock set 10:30:00 21 dec 2006 R3#clock set 10:30:00 21 dec 2006sh clock access-list Extended IP access list Prob14 10 deny ospf any any time-range Prob14 (inactive) (13 matches) 20 permit ip any any (14 matches) R3# Dec 21 10:30:04.246: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on Tunnel0 from LOADING to FULL, Loading Done R3# R3# R3# R3# R3#sh run | b Tu interface Tunnel0 ip address 13.13.13.3 255.255.255.0 ip access-group Prob14 in keepalive 10 3 tunnel source Loopback0 tunnel destination 223.1.1.1 ! interface FastEthernet0/0 ip address 17.80.1.1 255.255.255.0 duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 --More--   ip address 208.28.1.2 255.255.255.248 encapsulation frame-relay frame-relay map ip 208.28.1.1 301 frame-relay map ip 208.28.1.3 302 no frame-relay inverse-arp ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.3 255.255.255.224 ip rip triggered ip rip authentication mode md5 ip rip authentication key-chain xxx ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown --More--  ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 router-id 3.3.3.3 log-adjacency-changes redistribute rip subnets network 13.13.13.3 0.0.0.0 area 0 network 17.80.1.1 0.0.0.0 area 0 distribute-list prefix Prob12 in Tunnel0 ! router rip version 2 --More--   no validate-update-source timers basic 30 180 0 240 redistribute ospf 1 metric 6 network 180.40.0.0 network 208.28.1.0 network 222.1.1.0 neighbor 208.28.1.3 neighbor 208.28.1.1 maximum-paths 3 no auto-summary ! ip classless ! no ip http server no ip http secure-server ! ip access-list extended Prob14 deny ospf any any time-range Prob14 permit ip any any ! ! ip prefix-list Prob12 seq 5 deny 223.1.1.0/24 ip prefix-list Prob12 seq 10 permit 0.0.0.0/0 le 32 --More--  ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 ! time-range Prob14 periodic weekdays 17:00 to 23:59 periodic weekdays 0:00 to 8:00 periodic Saturday 0:00 to 23:59 periodic Sunday 0:00 to 23:59 ! ! end --More--