Option A


R2#sh run | b interface Serial1/0
interface Serial1/0
 no ip address
 encapsulation frame-relay
 no fair-queue
 frame-relay traffic-shaping
!
interface Serial1/0.1 point-to-point
 ip address 180.40.7.67 255.255.255.224
 ip ospf network point-to-multipoint
 frame-relay interface-dlci 203
!
interface Serial1/0.2 point-to-point
 ip address 180.40.7.162 255.255.255.224
 ip ospf network point-to-multipoint
 frame-relay de-group 1 207
 frame-relay interface-dlci 207
  class Prob4
!

!
map-class frame-relay Prob4
 frame-relay cir 64000
 frame-relay bc 64000
 frame-relay be 32000
 frame-relay adaptive-shaping becn








Option B


R2(config-subif)#do sh run int s 1/0.2
Building configuration...

Current configuration : 210 bytes
!
interface Serial1/0.2 point-to-point
 ip address 180.40.7.162 255.255.255.224
 ip ospf network point-to-multipoint
 frame-relay class Prob4
 frame-relay de-group 1 207
 frame-relay interface-dlci 207
end

R2(config-subif)#



R2(config-if)#do sh traff

Interface   Se1/0
       Access Target    Byte   Sustain   Excess    Interval  Increment Adapt
VC     List   Rate      Limit  bits/int  bits/int  (ms)      (bytes)   Active
201           56000     875    7000      0         125       875       -

Interface   Se1/0.1
       Access Target    Byte   Sustain   Excess    Interval  Increment Adapt
VC     List   Rate      Limit  bits/int  bits/int  (ms)      (bytes)   Active
203           56000     875    7000      0         125       875       -

Interface   Se1/0.2
       Access Target    Byte   Sustain   Excess    Interval  Increment Adapt
VC     List   Rate      Limit  bits/int  bits/int  (ms)      (bytes)   Active
207           64000     5000   64000     32000     125       1000      BECN