=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2005.09.21 06:39:26 =~=~=~=~=~=~=~=~=~=~=~= R7 con0 is now available Press RETURN to get started. RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#con   sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 180.40.7.130 YES manual up up ATM1/0 unassigned YES unset administratively down down Virtual-Access1 unassigned YES unset up up R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int lo 0 R4(config-if)#ip addrss    ess 100.1.1.1 21 55.255.255.0 R4(config-if)# R4(config-if)# R4(config-if)# R4(config-if)# R4(config-if)# R4(config-if)#do sh run | b router router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server ip classless ! ! ! ! call rsvp-sync ! ! mgcp profile default ! dial-peer cor custom ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous --More--   R4(config-if)#^Z R4# *Mar 1 15:37:50.732: %SYS-5-CONFIG_I: Configured from console by console R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh access-list R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#access-list 100 per host      icmp host 100.1.1.1 hos 20.10.1.2 echo R3(config)#access-list 101 per tcmp host 100.1.1.1 20.cmp host 100.1.1.1 20. icmp host 100.1.1.1 20.cmp host 100.1.1.1 20.10.1.0 0.0.0.255 eho  cho R3(config)#route-map ? WORD Route map tag R3(config)#route-map Prob1 ? <0-65535> Sequence to insert to/delete from existing route-map entry deny Route map denies set operations permit Route map permits set operations R3(config)#route-map Prob1 per 10 R3(config-route-map)#match ip add 100 R3(config-route-map)# R3(config-route-map)# R3(config-route-map)# R3(config-route-map)#match ? as-path Match BGP AS path list clns CLNS information community Match BGP community list extcommunity Match BGP/VPN extended community list interface Match first hop interface of route ip IP specific information ipv6 IPv6 specific information length Packet length metric Match metric of route mpls-label Match routes which have MPLS labels nlri BGP NLRI type policy-list Match IP policy list route-type Match route-type of route tag Match tag of route R3(config-route-map)#match len R3(config-route-map)#match length ? <0-2147483647> Minimum packet length R3(config-route-map)#match length 0 ? <0-2147483647> Maximum packet length R3(config-route-map)#match length 0 1000 R3(config-route-map)#set ? as-path Prepend string for a BGP AS-path attribute automatic-tag Automatically compute TAG value clns OSI summary address comm-list set BGP community list (for deletion) community BGP community attribute dampening Set BGP route flap dampening parameters default Set default information extcommunity BGP extended community attribute interface Output interface ip IP specific information ipv6 IPv6 specific information level Where to import route local-preference BGP local preference path attribute metric Metric value for destination routing protocol metric-type Type of metric for destination routing protocol mpls-label Set MPLS label for prefix nlri BGP NLRI type origin BGP origin code tag Tag value for destination routing protocol traffic-index BGP traffic classification number for accounting weight BGP weight for routing table R3(config-route-map)#set ip ? address Specify IP address default Set default information df Set DF bit next-hop Next hop address precedence Set precedence field qos-group Set QOS Group ID tos Set type of service field R3(config-route-map)#set ip hec x R3(config-route-map)#set ip hex      in R3(config-route-map)#set interface          p nex R3(config-route-map)#set ip next-hop ? A.B.C.D IP address of next hop peer-address Use peer address (for BGP only) verify-availability Verify if nexthop is a CDP neighbor R3(config-route-map)#set ip next-hop 180.40.7.67 ? A.B.C.D IP address of next hop R3(config-route-map)#set ip next-hop 180.40.7.67 R3(config-route-map)#set ip next-hop 180.40.7.67 match length 0 1000 ip add 100 route-map Prob1 per 100 20 R3(config-route-map)#match ip addre 1  101 R3(config-route-map)#set int ser 1/2 R3(config-route-map)#match len R3(config-route-map)#match length ? <0-2147483647> Minimum packet length R3(config-route-map)#match length 1001 ? <0-2147483647> Maximum packet length R3(config-route-map)#match length 1001 1 1500    2147483647 R3(config-route-map)#int fa 0/0 R3(config-if)#ip pol R3(config-if)#ip policy rou R3(config-if)#ip policy route-map Prob10  R3(config-if)#ip policy route-map Prob1 ? R3(config-if)#ip policy route-map Prob1                           ^Z R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#sh ip route 20.10.1.0 Routing entry for 20.10.1.0/24 Known via "ospf 1", distance 110, metric 66, type intra area Last update from 180.40.7.131 on FastEthernet0/0, 00:12:57 ago Routing Descriptor Blocks: * 180.40.7.131, from 180.40.7.162, 00:12:57 ago, via FastEthernet0/0 Route metric is 66, traffic share count is 1 R4# R4# R4# R4# R4# RACK18AS>1 [Resuming connection 1 to r1 ... ] R1#sh int s 0/0 Serial0/0 is up, line protocol is up Hardware is PowerQUICC Serial MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 5697, LMI stat recvd 5698, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 5707/0, interface broadcasts 3798 Last input 00:00:00, output 00:00:04, output hang never Last clearing of "show interface" counters 15:49:59 Input queue: 1/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 1158 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 10975 packets input, 809626 bytes, 0 no buffer --More--   R1# RACK18AS>3 [Resuming connection 3 to r3 ... ] * R3#sh int s 1/0 Serial1/0 is up, line protocol is up Hardware is CD2430 in sync mode Internet address is 180.40.7.66/27 MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 5693, LMI stat recvd 5694, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 3794/0, interface broadcasts 1898 Last input 00:00:00, output 00:00:01, output hang never Last clearing of "show interface" counters 15:48:58 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/2/32 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 96 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec --More--   R3# RACK18AS>1 [Resuming connection 1 to r1 ... ] R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int s 0./  /0 R1(config-if)#band 128 R1(config-if)#^Z R1# *Mar 1 15:51:05.169: %SYS-5-CONFIG_I: Configured from console by console R1#4 Trying 4... % Destination unreachable; gateway or host down % Unknown command or computer name, or unable to find computer address R1# R1# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#sh ip route 20.10.1.0\ ^ % Invalid input detected at '^' marker. R4#sh ip route 20.10.1.0\  Routing entry for 20.10.1.0/24 Known via "ospf 1", distance 110, metric 66, type intra area Last update from 180.40.7.131 on FastEthernet0/0, 00:14:43 ago Routing Descriptor Blocks: * 180.40.7.131, from 180.40.7.162, 00:14:43 ago, via FastEthernet0/0 Route metric is 66, traffic share count is 1 R4#sh ip route 20.10.1.0 Routing entry for 20.10.1.0/24 Known via "ospf 1", distance 110, metric 66, type intra area Last update from 180.40.7.131 on FastEthernet0/0, 00:14:45 ago Routing Descriptor Blocks: * 180.40.7.131, from 180.40.7.162, 00:14:45 ago, via FastEthernet0/0 Route metric is 66, traffic share count is 1 R4#sh ip route 20.10.1.0 Routing entry for 20.10.1.0/24 Known via "ospf 1", distance 110, metric 66, type intra area Last update from 180.40.7.131 on FastEthernet0/0, 00:14:46 ago Routing Descriptor Blocks: * 180.40.7.131, from 180.40.7.162, 00:14:46 ago, via FastEthernet0/0 Route metric is 66, traffic share count is 1 R4#sh ip route 20.10.1.0 Routing entry for 20.10.1.0/24 Known via "ospf 1", distance 110, metric 66, type intra area Last update from 180.40.7.131 on FastEthernet0/0, 00:14:50 ago Routing Descriptor Blocks: * 180.40.7.131, from 180.40.7.162, 00:14:50 ago, via FastEthernet0/0 Route metric is 66, traffic share count is 1 R4#s  RACK18AS>1 [Resuming connection 1 to r1 ... ] R1# R1# R1# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#sh ip oi spf data OSPF Router with ID (180.40.7.130) (Process ID 1) Router Link States (Area 0) Link ID ADV Router Age Seq# Checksum Link count 20.10.1.2 20.10.1.2 856 0x80000023 0x00612C 1 180.40.7.129 180.40.7.129 574 0x80000022 0x008751 6 180.40.7.130 180.40.7.130 637 0x80000020 0x00FF02 2 180.40.7.162 180.40.7.162 515 0x80000025 0x00F670 7 208.28.1.1 208.28.1.1 617 0x80000027 0x00DE83 6 208.28.1.2 208.28.1.2 1102 0x8000001E 0x002528 1 Net Link States (Area 0) Link ID ADV Router Age Seq# Checksum 20.10.1.1 180.40.7.162 515 0x8000001D 0x00824D 180.40.7.130 180.40.7.130 637 0x8000001E 0x00238D 208.28.1.2 208.28.1.2 1102 0x8000001D 0x002A35 R4#sh ip ospf data 20.10.1.0 ^ % Invalid input detected at '^' marker. R4#sh ip ospf data 20.10.1.0         ? adv-router Advertising Router link states asbr-summary ASBR summary link states database-summary Summary of database external External link states network Network link states nssa-external NSSA External link states opaque-area Opaque Area link states opaque-as Opaque AS link states opaque-link Opaque Link-Local link states router Router link states self-originate Self-originated link states summary Network summary link states | Output modifiers R4#sh ip ospf data net 20.10.1.0 OSPF Router with ID (180.40.7.130) (Process ID 1) R4#sh ip ospf data net 20.10.1.0 1 OSPF Router with ID (180.40.7.130) (Process ID 1) Net Link States (Area 0) Routing Bit Set on this LSA LS age: 563 Options: (No TOS-capability, DC) LS Type: Network Links Link State ID: 20.10.1.1 (address of Designated Router) Advertising Router: 180.40.7.162 LS Seq Number: 8000001D Checksum: 0x824D Length: 32 Network Mask: /24 Attached Router: 180.40.7.162 Attached Router: 20.10.1.2 R4#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 1 subnets O 20.10.1.0 [110/66] via 180.40.7.131, 00:16:15, FastEthernet0/0 O 208.28.1.0/24 [110/11] via 180.40.7.131, 00:16:15, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/65] via 180.40.7.131, 00:16:15, FastEthernet0/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:16:16, FastEthernet0/0 O 180.40.7.0/27 [110/782] via 180.40.7.129, 00:16:16, FastEthernet0/0 O 180.40.7.67/32 [110/65] via 180.40.7.131, 00:16:16, FastEthernet0/0 O 180.40.7.66/32 [110/1] via 180.40.7.129, 00:16:16, FastEthernet0/0 O 180.40.7.65/32 [110/1] via 180.40.7.131, 00:16:16, FastEthernet0/0 R4#   RACK18AS>1 [Resuming connection 1 to r1 ... ] R1#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/32 is subnetted, 1 subnets O 100.1.1.1 [110/11] via 180.40.7.130, 00:16:49, Ethernet0/1 20.0.0.0/24 is subnetted, 1 subnets O 20.10.1.0 [110/65] via 180.40.7.162, 00:16:49, Serial0/0.2 C 208.28.1.0/24 is directly connected, Ethernet0/0 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, Ethernet0/1 O 180.40.7.162/32 [110/64] via 180.40.7.162, 00:16:49, Serial0/0.2 C 180.40.7.160/27 is directly connected, Serial0/0.2 O 180.40.7.0/27 [110/791] via 180.40.7.129, 00:16:50, Ethernet0/1 O 180.40.7.67/32 [110/64] via 180.40.7.162, 00:16:50, Serial0/0.2 O 180.40.7.66/32 [110/10] via 180.40.7.129, 00:16:50, Ethernet0/1 C 180.40.7.64/27 is directly connected, Serial0/0.1 R1# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/32 is subnetted, 1 subnets O 100.1.1.1 [110/2] via 180.40.7.130, 00:16:58, FastEthernet0/0 20.0.0.0/24 is subnetted, 1 subnets O 20.10.1.0 [110/66] via 180.40.7.131, 00:16:58, FastEthernet0/0 O 208.28.1.0/24 [110/11] via 180.40.7.131, 00:16:58, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/65] via 180.40.7.131, 00:16:58, FastEthernet0/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:16:59, FastEthernet0/0 C 180.40.7.0/27 is directly connected, Serial1/2 O 180.40.7.67/32 [110/65] via 180.40.7.131, 00:16:59, FastEthernet0/0 O 180.40.7.65/32 [110/1] via 180.40.7.131, 00:16:59, FastEthernet0/0 C 180.40.7.64/27 is directly connected, Serial1/0 R3# RACK18AS>1 [Resuming connection 1 to r1 ... ] R1#sh ip    int s 0/0-  Serial0/0 is up, line protocol is up Hardware is PowerQUICC Serial MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 5718, LMI stat recvd 5719, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 5730/0, interface broadcasts 3813 Last input 00:00:03, output 00:00:01, output hang never Last clearing of "show interface" counters 15:53:33 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 96 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 11014 packets input, 812559 bytes, 0 no buffer --More--   R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int s0/0.2 R1(config-subif)#band 128 R1(config-subif)#^Z R1# *Mar 1 15:54:21.888: %SYS-5-CONFIG_I: Configured from console by console R1# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/32 is subnetted, 1 subnets O 100.1.1.1 [110/2] via 180.40.7.130, 00:00:01, FastEthernet0/0 20.0.0.0/24 is subnetted, 1 subnets O 20.10.1.0 [110/782] via 180.40.7.2, 00:00:01, Serial1/2 [110/782] via 180.40.7.67, 00:00:01, Serial1/0 O 208.28.1.0/24 [110/11] via 180.40.7.131, 00:00:01, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/781] via 180.40.7.2, 00:00:02, Serial1/2 [110/781] via 180.40.7.67, 00:00:02, Serial1/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:00:02, FastEthernet0/0 C 180.40.7.0/27 is directly connected, Serial1/2 O 180.40.7.67/32 [110/781] via 180.40.7.2, 00:00:02, Serial1/2 --More--   R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 1 subnets O 20.10.1.0 [110/783] via 180.40.7.131, 00:00:11, FastEthernet0/0 [110/783] via 180.40.7.129, 00:00:11, FastEthernet0/0 O 208.28.1.0/24 [110/11] via 180.40.7.131, 00:00:11, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/782] via 180.40.7.131, 00:00:12, FastEthernet0/0 [110/782] via 180.40.7.129, 00:00:12, FastEthernet0/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:00:12, FastEthernet0/0 O 180.40.7.0/27 [110/782] via 180.40.7.129, 00:00:12, FastEthernet0/0 O 180.40.7.67/32 [110/782] via 180.40.7.131, 00:00:12, FastEthernet0/0 --More--   R4#ping RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#log buf R3(config)#^Z R3#deb i *Mar 1 15:53:57.283: %SYS-5-CONFIG_I: Configured from console by console R3#deb ip pol Policy routing debugging is on R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] Protocol [ip]: Target IP address: 20.1.1  0.1.1 Repeat count [5]: 10 Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: 100.1.1.1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 10, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!!!!!!! Success rate is 100 percent (10/10), round-trip min/avg/max = 44/49/64 ms R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Mpolicy rejected -- normal forwarding *Mar 1 15:54:26.219: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy rejected -- normal forwarding *Mar 1 15:54:26.327: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy rejected -- normal forwarding *Mar 1 15:54:26.419: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy rejected -- normal forwarding *Mar 1 15:54:26.527: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy rejected -- normal forwarding R3# R3# R3# R3# R3# R3# R3# RACK18AS> [Resuming connection 3 to r3 ... ] R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#100.1.1.1y 1020.10.1.1 ping  Protocol [ip]: Target IP address: ping 100.1.1.1y 1020.10.1.1 Repeat count [5]: 10 Datagram size [100]: 10 200 Timeout in seconds [2]: Extended commands [n]: y Source address or interface: y12000 20.10.1.1 % Invalid source Source address or interface: 20.10.1.1 y 12000 20.10.1.1 ping 100.1.1.1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 10, 1200-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!! RACK18AS>3 [Resuming connection 3 to r3 ... ] *Mar R3# *Mar 1 15:55:14.714: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 1200, policy match *Mar 1 15:55:14.714: IP: route map Prob1, item 20, permit *Mar 1 15:55:14.718: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 1200, policy routed *Mar 1 15:55:14.718: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:55:15.640: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 1200, policy match *Mar 1 15:55:15.640: IP: route map Prob1, item 20, permit *Mar 1 15:55:15.640: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 1200, policy routed *Mar 1 15:55:15.640: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 R3# *Mar 1 15:55:16.561: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 1200, policy match *Mar 1 15:55:16.565: IP: route map Prob1, item 20, permit *Mar 1 15:55:16.565: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 1200, policy routed *Mar 1 15:55:16.565: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 R3#sh run | b route-map ip policy route-map Prob1 duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network point-to-multipoint frame-relay map ip 180.40.7.65 301 broadcast frame-relay map ip 180.40.7.67 302 broadcast ! interface Serial1/1 no ip address --More--   shutdown ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address --More--   shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server no ip http secure-server ip classless ! ! ! access-list 100 permit icmp host 100.1.1.1 host 20.10.1.2 echo access-list 101 permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo ! route-map Prob1 permit 10 match ip address 100 match length 0 1000 set ip next-hop 180.40.7.67 ! route-map Prob1 permit 20 match ip address 101 match length 1001 2147483647 --More--   set interface Serial1/2 ! ! call rsvp-sync ! ! mgcp profile default ! ! ! dial-peer cor custom ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login --More--   R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#access-list 102 per ip    icmp hi ost 100.1.1.1 g host 20.10.1.1 echo R3(config)#route-map Prob1 per 15 R3(config-route-map)#match 1 ip add 102 R3(config-route-map)#set int ser 1/2 R3(config-route-map)#^Z R3# *Mar 1 15:57:42.609: %SYS-5-CONFIG_I: Configured from console by console R3# R3# R3# R3#config tsh run | b route-map ip policy route-map Prob1 duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network point-to-multipoint frame-relay map ip 180.40.7.65 301 broadcast frame-relay map ip 180.40.7.67 302 broadcast ! interface Serial1/1 no ip address --More--   shutdown ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address --More--   shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server no ip http secure-server ip classless ! ! ! access-list 100 permit icmp host 100.1.1.1 host 20.10.1.2 echo access-list 101 permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo access-list 102 permit icmp host 100.1.1.1 host 20.10.1.1 echo ! route-map Prob1 permit 10 match ip address 100 match length 0 1000 set ip next-hop 180.40.7.67 ! route-map Prob1 permit 15 match ip address 102 --More--   set interface Serial1/2 ! route-map Prob1 permit 20 match ip address 101 match length 1001 2147483647 set interface Serial1/2 ! ! call rsvp-sync ! ! mgcp profile default ! ! ! dial-peer cor custom ! ! ! ! ! line con 0 exec-timeout 0 0 --More--   logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! ! end R3#q  RACK18AS>4 [Resuming connection 4 to r4 ... ] !! R4#100.1.1.120.10.1.1 y 12000   ping 20.10.1.1 sou 100.1..1  1.,1  1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/46/48 ms R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] * R3#sh log Syslog logging: enabled (0 messages dropped, 12 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 106 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 66 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 58 message lines logged --More--   Log Buffer (4096 bytes): *Mar 1 15:53:57.283: %SYS-5-CONFIG_I: Configured from console by console *Mar 1 15:54:26.126: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy rejected -- normal forwarding *Mar 1 15:54:26.219: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy rejected -- normal forwarding *Mar 1 15:54:26.327: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy rejected -- normal forwarding *Mar 1 15:54:26.419: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy rejected -- normal forwarding *Mar 1 15:54:26.527: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy rejected -- normal forwarding *Mar 1 15:55:12.867: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 1200, policy match *Mar 1 15:55:12.871: IP: route map Prob1, item 20, permit *Mar 1 15:55:12.871: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 1200, policy routed *Mar 1 15:55:12.871: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:55:13.793: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 1200, policy match *Mar 1 15:55:13.793: IP: route map Prob1, item 20, permit --More--  *Mar 1 15:55:13.793: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 1200, policy routed *Mar 1 15:55:13.793: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:55:14.714: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 1200, policy match *Mar 1 15:55:14.714: IP: route map Prob1, item 20, permit *Mar 1 15:55:14.718: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 1200, policy routed *Mar 1 15:55:14.718: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:55:15.640: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 1200, policy match *Mar 1 15:55:15.640: IP: route map Prob1, item 20, permit *Mar 1 15:55:15.640: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 1200, policy routed *Mar 1 15:55:15.640: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:55:16.561: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 1200, policy match *Mar 1 15:55:16.565: IP: route map Prob1, item 20, permit *Mar 1 15:55:16.565: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 1200, policy routed *Mar 1 15:55:16.565: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:57:42.609: %SYS-5-CONFIG_I: Configured from console by console *Mar 1 15:58:49.662: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, policy match --More--  *Mar 1 15:58:49.662: IP: route map Prob1, item 15, permit *Mar 1 15:58:49.662: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy routed *Mar 1 15:58:49.662: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:58:49.759: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 15:58:49.759: IP: route map Prob1, item 15, permit *Mar 1 15:58:49.759: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy routed *Mar 1 15:58:49.759: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 R3# R3# R3# R3# R3# R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#ping Protocol [ip]: Target IP address: 20.10.1.2 Repeat count [5]: 10 Datagram size [100]: 15 499 Timeout in seconds [2]: Extended commands [n]: y Source address or interface: loopback0 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 10, 1499-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !! RACK18AS>3 [Resuming connection 3 to r3 ... ] *Mar *Mar 1 15:59:46.283: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:46.287: IP: route map Prob1, item 20, permit *Mar 1 15:59:46.287: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:46.287: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:47.245: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:47.249: IP: route map Prob1, item 20, permit *Mar 1 15:59:47.249: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:47.249: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 R3# R3# *Mar 1 15:59:48.206: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:48.206: IP: route map Prob1, item 20, permit *Mar 1 15:59:48.206: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:48.210: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:49.168: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:49.168: IP: route map Prob1, item 20, permit *Mar 1 15:59:49.168: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:49.168: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] !! R4#ping 20.10.1.;1  1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 32/49/60 ms R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Ma R3#sh log Syslog logging: enabled (0 messages dropped, 12 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 150 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 110 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 58 message lines logged --More--   Log Buffer (4096 bytes): ted *Mar 1 15:55:12.871: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:55:13.793: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 1200, policy match *Mar 1 15:55:13.793: IP: route map Prob1, item 20, permit *Mar 1 15:55:13.793: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 1200, policy routed *Mar 1 15:55:13.793: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:55:14.714: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 1200, policy match *Mar 1 15:55:14.714: IP: route map Prob1, item 20, permit *Mar 1 15:55:14.718: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 1200, policy routed *Mar 1 15:55:14.718: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:55:15.640: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 1200, policy match *Mar 1 15:55:15.640: IP: route map Prob1, item 20, permit *Mar 1 15:55:15.640: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 1200, policy routed *Mar 1 15:55:15.640: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:55:16.561: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 1200, policy match --More--  *Mar 1 15:55:16.565: IP: route map Prob1, item 20, permit *Mar 1 15:55:16.565: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 1200, policy routed *Mar 1 15:55:16.565: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:57:42.609: %SYS-5-CONFIG_I: Configured from console by console *Mar 1 15:58:49.662: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 15:58:49.662: IP: route map Prob1, item 15, permit *Mar 1 15:58:49.662: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy routed *Mar 1 15:58:49.662: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:58:49.759: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 15:58:49.759: IP: route map Prob1, item 15, permit *Mar 1 15:58:49.759: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy routed *Mar 1 15:58:49.759: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:44.945: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:44.945: IP: route map Prob1, item 20, permit *Mar 1 15:59:44.945: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:44.945: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 --More--  *Mar 1 15:59:46.283: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:46.287: IP: route map Prob1, item 20, permit *Mar 1 15:59:46.287: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:46.287: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:47.245: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:47.249: IP: route map Prob1, item 20, permit *Mar 1 15:59:47.249: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:47.249: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:48.206: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:48.206: IP: route map Prob1, item 20, permit *Mar 1 15:59:48.206: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:48.210: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:49.168: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:49.168: IP: route map Prob1, item 20, permit *Mar 1 15:59:49.168: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed --More--  *Mar 1 15:59:49.168: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 16:00:06.216: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy rejected -- normal forwarding *Mar 1 16:00:06.324: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy rejected -- normal forwarding *Mar 1 16:00:06.416: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy rejected -- normal forwarding R3# R3# R3# R3# R3# R3# R3# R3#sh access-list Extended IP access list 100 10 permit icmp host 100.1.1.1 host 20.10.1.2 echo (5 matches) Extended IP access list 101 10 permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo (15 matches) Extended IP access list 102 10 permit icmp host 100.1.1.1 host 20.10.1.1 echo (2 matches) R3# R3# R3# R3# R3# R3# R3# R3# R3#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/32 is subnetted, 1 subnets O 100.1.1.1 [110/2] via 180.40.7.130, 00:08:59, FastEthernet0/0 20.0.0.0/24 is subnetted, 1 subnets O 20.10.1.0 [110/782] via 180.40.7.2, 00:08:59, Serial1/2 [110/782] via 180.40.7.67, 00:08:59, Serial1/0 O 208.28.1.0/24 [110/11] via 180.40.7.131, 00:08:59, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/781] via 180.40.7.2, 00:09:00, Serial1/2 [110/781] via 180.40.7.67, 00:09:00, Serial1/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:09:00, FastEthernet0/0 C 180.40.7.0/27 is directly connected, Serial1/2 O 180.40.7.67/32 [110/781] via 180.40.7.2, 00:09:00, Serial1/2 --More--   [110/781] via 180.40.7.67, 00:09:00, Serial1/0 --More--  O 180.40.7.65/32 [110/1] via 180.40.7.131, 00:09:02, FastEthernet0/0 --More--  C 180.40.7.64/27 is directly connected, Serial1/0 R3# R3# R3# R3#sh run | b interface F interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network point-to-multipoint frame-relay map ip 180.40.7.65 301 broadcast frame-relay map ip 180.40.7.67 302 broadcast ! --More--  interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! --More--  interface Serial1/7 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server no ip http secure-server ip classless ! ! ! access-list 100 permit icmp host 100.1.1.1 host 20.10.1.2 echo access-list 101 permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo access-list 102 permit icmp host 100.1.1.1 host 20.10.1.1 echo ! route-map Prob1 permit 10 match ip address 100 match length 0 1000 set ip next-hop 180.40.7.67 ! --More--  route-map Prob1 permit 15 match ip address 102 set interface Serial1/2 ! route-map Prob1 permit 20 match ip address 101 match length 1001 2147483647 set interface Serial1/2 ! ! call rsvp-sync ! ! mgcp profile default ! ! ! dial-peer cor custom ! ! ! ! ! --More--   R3#cop nfig t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#access-list 103 per ip host 192.10.32.18 host 20.10.           20.10.1.0 0.0.0.255  host 192.10.32.18 20.10.1.0 0.0.0.255 c host 192.10.32.18 20.10.1.0 0.0.0.255 m host 192.10.32.18 20.10.1.0 0.0.0.255 p host 192.10.32.18 20.10.1.0 0.0.0.255  host 192.10.32.18 20.10.1.0 0.0.0.255  host 192.10.32.18 20.10.1.0 0.0.0.255  host 192.10.32.18 20.10.1.0 0.0.0.255  host 192.10.32.18 20.10.1.0 0.0.0.255 i host 192.10.32.18 20.10.1.0 0.0.0.255 p host 192.10.32.18 20.10.1.0 0.0.0.255  R3(config)#route-map Prob1 per 30 R3(config-route-map)#match ip add 103 R3(config-route-map)#set ip nex 180.40.7.65 R3(config-route-map)#^Z R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#sh ipo in     int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 180.40.7.130 YES manual up up ATM1/0 unassigned YES unset administratively down down Virtual-Access1 unassigned YES unset up up Loopback0 100.1.1.1 YES manual up up R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int lo 1 R4(config-if)#ip address 192.10.32.18 255.255.255.0 R4(config-if)#^Z R4#ping *Mar 1 16:09:33.191: %SYS-5-CONFIG_I: Configured from console by console R4#ping 20.1.  10.1.1 soiu   our 192.32.10     10.32.18 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: Packet sent with a source address of 192.10.32.18 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/63/88 ms R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Marcy match *Mar 1 16:07:40.308: IP: route map Prob1, item 30, permit *Mar 1 16:07:40.308: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy routed *Mar 1 16:07:40.308: IP: FastEthernet0/0 to Serial1/0 180.40.7.65 *Mar 1 16:07:40.445: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 16:07:40.445: IP: route map Prob1, item 30, permit *Mar 1 16:07:40.445: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy routed *Mar 1 16:07:40.445: IP: FastEthernet0/0 to Serial1/0 180.40.7.65 R3# R3# R3# R3# R3# R3# R3# R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#ping Protocol [ip]: Target IP address: 20.10.1.1 Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: loopback1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: r Number of hops [ 9 ]: Loose, Strict, Record, Timestamp, Verbose[RV]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: Packet sent with a source address of 192.10.32.18 Packet has IP options: Total option bytes= 39, padded length=40 Record route: <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) Reply to request 0 (92 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.1) (180.40.7.161) (20.10.1.1) (180.40.7.67) (180.40.7.129) (192.10.32.18) <*> (0.0.0.0) (0.0.0.0) End of list Reply to request 1 (48 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.161) (20.10.1.1) (180.40.7.2) (180.40.7.129) (192.10.32.18) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Reply to request 2 (104 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.66) (180.40.7.161) (20.10.1.1) (180.40.7.67) (180.40.7.129) (192.10.32.18) <*> (0.0.0.0) (0.0.0.0) End of list Reply to request 3 (48 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.161) (20.10.1.1) (180.40.7.2) (180.40.7.129) (192.10.32.18) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Reply to request 4 (92 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.1) (180.40.7.161) (20.10.1.1) (180.40.7.67) (180.40.7.129) (192.10.32.18) <*> (0.0.0.0) (0.0.0.0) End of list Success rate is 100 percent (5/5), round-trip min/avg/max = 48/76/104 ms R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Mar 1 16:08 R3#sh log Syslog logging: enabled (0 messages dropped, 12 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 186 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 146 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 59 message lines logged --More--   Log Buffer (4096 bytes): P: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:58:49.759: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 15:58:49.759: IP: route map Prob1, item 15, permit *Mar 1 15:58:49.759: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy routed *Mar 1 15:58:49.759: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:44.945: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:44.945: IP: route map Prob1, item 20, permit *Mar 1 15:59:44.945: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:44.945: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:46.283: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:46.287: IP: route map Prob1, item 20, permit *Mar 1 15:59:46.287: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:46.287: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:47.245: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match --More--  *Mar 1 15:59:47.249: IP: route map Prob1, item 20, permit *Mar 1 15:59:47.249: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:47.249: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:48.206: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:48.206: IP: route map Prob1, item 20, permit *Mar 1 15:59:48.206: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:48.210: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:49.168: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:49.168: IP: route map Prob1, item 20, permit *Mar 1 15:59:49.168: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:49.168: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 16:00:06.216: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy rejected -- normal forwarding *Mar 1 16:00:06.324: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy rejected -- normal forwarding *Mar 1 16:00:06.416: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy rejected -- normal forwarding *Mar 1 16:06:43.367: %SYS-5-CONFIG_I: Configured from console by console --More--  *Mar 1 16:07:40.308: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 16:07:40.308: IP: route map Prob1, item 30, permit *Mar 1 16:07:40.308: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy routed *Mar 1 16:07:40.308: IP: FastEthernet0/0 to Serial1/0 180.40.7.65 *Mar 1 16:07:40.445: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 16:07:40.445: IP: route map Prob1, item 30, permit *Mar 1 16:07:40.445: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy routed *Mar 1 16:07:40.445: IP: FastEthernet0/0 to Serial1/0 180.40.7.65 *Mar 1 16:08:30.871: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 16:08:30.871: IP: route map Prob1, item 30, permit *Mar 1 16:08:30.871: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy routed *Mar 1 16:08:30.871: IP: FastEthernet0/0 to Serial1/0 180.40.7.65 *Mar 1 16:08:31.015: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 16:08:31.015: IP: route map Prob1, item 30, permit *Mar 1 16:08:31.015: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy routed --More--  *Mar 1 16:08:31.015: IP: FastEthernet0/0 to Serial1/0 180.40.7.65 *Mar 1 16:08:32.314: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 16:08:32.314: IP: route map Prob1, item 30, permit *Mar 1 16:08:32.314: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy routed *Mar 1 16:08:32.314: IP: FastEthernet0/0 to Serial1/0 180.40.7.65 R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#ping Protocol [ip]: Target IP address: 20.10.1.1 Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: 100.1.1.1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: r  Loose, Strict, Record, Timestamp, Verbose[none]: r Number of hops [ 9 ]: Loose, Strict, Record, Timestamp, Verbose[RV]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 Packet has IP options: Total option bytes= 39, padded length=40 Record route: <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) Reply to request 0 (64 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.161) (20.10.1.1) (180.40.7.67) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Reply to request 1 (32 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.66) (20.10.1.1) (180.40.7.2) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Reply to request 2 (60 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.161) (20.10.1.1) (180.40.7.67) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Reply to request 3 (36 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.1) (20.10.1.1) (180.40.7.2) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Reply to request 4 (96 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.161) (20.10.1.1) (180.40.7.67) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Success rate is 100 percent (5/5), round-trip min/avg/max = 32/57/96 ms R4# R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Mar 1 16:1 R3#sh log Syslog logging: enabled (0 messages dropped, 12 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 200 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 160 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 59 message lines logged --More--   Log Buffer (4096 bytes): IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:46.283: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:46.287: IP: route map Prob1, item 20, permit *Mar 1 15:59:46.287: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:46.287: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:47.245: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:47.249: IP: route map Prob1, item 20, permit *Mar 1 15:59:47.249: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:47.249: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:48.206: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match *Mar 1 15:59:48.206: IP: route map Prob1, item 20, permit *Mar 1 15:59:48.206: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:48.210: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 15:59:49.168: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1499, policy match --More--  *Mar 1 15:59:49.168: IP: route map Prob1, item 20, permit *Mar 1 15:59:49.168: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1499, policy routed *Mar 1 15:59:49.168: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 16:00:06.216: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy rejected -- normal forwarding *Mar 1 16:00:06.324: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy rejected -- normal forwarding *Mar 1 16:00:06.416: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy rejected -- normal forwarding *Mar 1 16:06:43.367: %SYS-5-CONFIG_I: Configured from console by console *Mar 1 16:07:40.308: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 16:07:40.308: IP: route map Prob1, item 30, permit *Mar 1 16:07:40.308: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy routed *Mar 1 16:07:40.308: IP: FastEthernet0/0 to Serial1/0 180.40.7.65 *Mar 1 16:07:40.445: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 16:07:40.445: IP: route map Prob1, item 30, permit *Mar 1 16:07:40.445: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy routed *Mar 1 16:07:40.445: IP: FastEthernet0/0 to Serial1/0 180.40.7.65 --More--  *Mar 1 16:08:30.871: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 16:08:30.871: IP: route map Prob1, item 30, permit *Mar 1 16:08:30.871: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy routed *Mar 1 16:08:30.871: IP: FastEthernet0/0 to Serial1/0 180.40.7.65 *Mar 1 16:08:31.015: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 16:08:31.015: IP: route map Prob1, item 30, permit *Mar 1 16:08:31.015: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy routed *Mar 1 16:08:31.015: IP: FastEthernet0/0 to Serial1/0 180.40.7.65 *Mar 1 16:08:32.314: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 16:08:32.314: IP: route map Prob1, item 30, permit *Mar 1 16:08:32.314: IP: s=192.10.32.18 (FastEthernet0/0), d=20.10.1.1 (Serial1/0), len 100, policy routed *Mar 1 16:08:32.314: IP: FastEthernet0/0 to Serial1/0 180.40.7.65 *Mar 1 16:12:30.941: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 16:12:30.941: IP: route map Prob1, item 15, permit *Mar 1 16:12:30.941: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy routed --More--  *Mar 1 16:12:30.945: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 1 16:12:32.195: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 1 16:12:32.195: IP: route map Prob1, item 15, permit *Mar 1 16:12:32.195: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy routed *Mar 1 16:12:32.195: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 R3# R3# RACK18AS>1 [Resuming connection 1 to r1 ... ] R1#deb ip icmp ICMP packet debugging is on R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#log buff R1(config)#^Z R1# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4# R4#r100.1.1.1y 20.10.1.1ping  Protocol [ip]: Target IP address: ping r 100.1.1.1y 20.10.1.1ping 20.10.1.1 Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: t y Source address or interface: y20.10.1.1ping r 100.1.1.1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: r Number of hops [ 9 ]: Loose, Strict, Record, Timestamp, Verbose[RV]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 Packet has IP options: Total option bytes= 39, padded length=40 Record route: <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) Reply to request 0 (36 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.66) (20.10.1.1) (180.40.7.2) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Reply to request 1 (60 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.161) (20.10.1.1) (180.40.7.67) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Reply to request 2 (32 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.1) (20.10.1.1) (180.40.7.2) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Reply to request 3 (76 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.161) (20.10.1.1) (180.40.7.67) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Reply to request 4 (36 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.66) (20.10.1.1) (180.40.7.2) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) End of list Success rate is 100 percent (5/5), round-trip min/avg/max = 32/48/76 ms R4# RACK18AS>1 [Resuming connection 1 to r1 ... ] *M R1#sh log Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 33 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 1 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 38 message lines logged --More--   Log Buffer (4096 bytes): *Mar 1 16:19:52.408: %SYS-5-CONFIG_I: Configured from console by console R1# sh log Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 33 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 1 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 38 message lines logged --More--   Log Buffer (4096 bytes): *Mar 1 16:19:52.408: %SYS-5-CONFIG_I: Configured from console by console R1#sh deb Generic IP: ICMP packet debugging is on R1# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 1 subnets O 20.10.1.0 [110/783] via 180.40.7.131, 00:12:21, FastEthernet0/0 [110/783] via 180.40.7.129, 00:12:21, FastEthernet0/0 O 208.28.1.0/24 [110/11] via 180.40.7.131, 00:12:21, FastEthernet0/0 C 192.10.32.0/24 is directly connected, Loopback1 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/782] via 180.40.7.131, 00:12:22, FastEthernet0/0 [110/782] via 180.40.7.129, 00:12:22, FastEthernet0/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:12:22, FastEthernet0/0 O 180.40.7.0/27 [110/782] via 180.40.7.129, 00:12:22, FastEthernet0/0 --More--   R4#sh run Building configuration... Current configuration : 959 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R4 ! logging queue-limit 100 ! ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 ! ! ! ! --More--  ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! interface Loopback0 ip address 100.1.1.1 255.255.255.0 ! interface Loopback1 ip address 192.10.32.18 255.255.255.0 ! interface FastEthernet0/0 ip address 180.40.7.130 255.255.255.224 duplex auto --More--   speed auto ! interface ATM1/0 no ip address shutdown no atm ilmi-keepalive ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server ip classless ! ! ! ! call rsvp-sync ! ! mgcp profile default ! dial-peer cor custom --More--  ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! ! end R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Mar 1 R3#sh access-list Extended IP access list 100 10 permit icmp host 100.1.1.1 host 20.10.1.2 echo (5 matches) Extended IP access list 101 10 permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo (15 matches) Extended IP access list 102 10 permit icmp host 100.1.1.1 host 20.10.1.1 echo (7 matches) Extended IP access list 103 10 permit ip host 192.10.32.18 20.10.1.0 0.0.0.255 (5 matches) R3# R3# R3# R3# R3# R3#sh rout R3#sh route-map route-map Prob1, permit, sequence 10 Match clauses: ip address (access-lists): 100 length 0 1000 Set clauses: ip next-hop 180.40.7.67 Policy routing matches: 0 packets, 0 bytes route-map Prob1, permit, sequence 15 Match clauses: ip address (access-lists): 102 Set clauses: interface Serial1/2 Policy routing matches: 7 packets, 798 bytes route-map Prob1, permit, sequence 20 Match clauses: ip address (access-lists): 101 length 1001 2147483647 Set clauses: interface Serial1/2 Policy routing matches: 10 packets, 13635 bytes route-map Prob1, permit, sequence 30 Match clauses: ip address (access-lists): 103 --More--   R3#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 180.40.7.129 YES manual up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 180.40.7.66 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.1 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--   R3#sh fram map Serial1/0 (up): ip 180.40.7.65 dlci 301(0x12D,0x48D0), static, broadcast, CISCO, status defined, active Serial1/0 (up): ip 180.40.7.67 dlci 302(0x12E,0x48E0), static, broadcast, CISCO, status defined, active R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#po  ping 1 20.1.1.   0.1.2 sour 100.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/45/48 ms R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] * R3# R3#sh fram map Serial1/0 (up): ip 180.40.7.65 dlci 301(0x12D,0x48D0), static, broadcast, CISCO, status defined, active Serial1/0 (up): ip 180.40.7.67 dlci 302(0x12E,0x48E0), static, broadcast, CISCO, status defined, active R3#sh fram mapip int brieroute-map  route-map Prob1, permit, sequence 10 Match clauses: ip address (access-lists): 100 length 0 1000 Set clauses: ip next-hop 180.40.7.67 Policy routing matches: 2 packets, 228 bytes route-map Prob1, permit, sequence 15 Match clauses: ip address (access-lists): 102 Set clauses: interface Serial1/2 Policy routing matches: 7 packets, 798 bytes route-map Prob1, permit, sequence 20 Match clauses: ip address (access-lists): 101 length 1001 2147483647 Set clauses: interface Serial1/2 Policy routing matches: 10 packets, 13635 bytes route-map Prob1, permit, sequence 30 Match clauses: ip address (access-lists): 103 --More--   R3# RACK18AS>1 [Resuming connection 1 to r1 ... ] R1#sh loig  g Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 33 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 1 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 38 message lines logged --More--   Log Buffer (4096 bytes): *Mar 1 16:19:52.408: %SYS-5-CONFIG_I: Configured from console by console R1# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4# R4#ping 20.10.1.2 sour 100.1.1.1 ping Protocol [ip]: Target IP address: 20.109 = .1.1 2 Repeat count [5]: 10000 Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: 100.1.1.1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 10000, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! RACK18AS>11  [Resuming connection 1 to r1 ... ] R1#sh log Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 33 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 1 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 38 message lines logged --More--   R1#sh log Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 33 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 1 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 38 message lines logged --More--   Log Buffer (4096 bytes): *Mar 1 16:19:52.408: %SYS-5-CONFIG_I: Configured from console by console R1#sh deb Generic IP: ICMP packet debugging is on R1#deb ip pack IP packet debugging is on R1# *Mar 1 16:25:58.364: IP: s=180.40.7.161 (local), d=224.0.0.5 (Serial0/0.2), len 80, sending broad/multicast *Mar 1 16:25:58.809: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:25:58.989: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast R1# *Mar 1 16:26:04.382: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast R1# *Mar 1 16:26:06.113: IP: s=180.40.7.130 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:26:06.746: IP: s=180.40.7.129 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 R1# *Mar 1 16:26:08.806: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:26:08.990: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast R1# *Mar 1 16:26:10.080: IP: s=180.40.7.65 (local), d=224.0.0.5 (Serial0/0.1), len 80, sending broad/multicast R1#u all All possible debugging has been turned off R1# *Mar 1 16:26:14.411: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast R1# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Ma, policy routed *Mar 1 16:24:44.696: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 1 16:24:44.788: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 1 16:24:44.788: IP: route map Prob1, item 10, permit *Mar 1 16:24:44.788: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:24:44.792: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 1 16:24:44.884: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 1 16:24:44.884: IP: route map Prob1, item 10, permit *Mar 1 16:24:44.884: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:24:44.884: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 1 16:24:44.976: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 1 16:24:44.976: IP: route map Prob1, item 10, permit *Mar 1 16:24:44.976: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:24:44.980: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 1 16:24:45.072: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 1 16:24:45.072: IP: route map Prob1, item 10, permit *Mar 1 16:24:45.072: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:24:45.072: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 1 16:24:45.164: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 1 16:24:45.164: IP: route map Prob1, item 10, permit *Mar 1 16:24:45.164: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:24:45.164: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 1 16:24:45.257: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 1 16:24:45.261: IP: route map Prob1, item 10, permit *Mar 1 16:24:45.261: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:24:45.261: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 1 16:24:45.353: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 1 16:24:45.353: IP: route map Prob1, item 10, permit *Mar 1 16:24:45.353: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:24:45.353: IP: FastEthernet0/0 to Serial1/0 RACK18AS>4 [Resuming connection 4 to r4 ... ] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!. Success rate is 99 percent (1067/1068), round-trip min/avg/max = 44/46/124 ms R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Mar 1 16:24:45.445: IP: thernet0/0 to Serial1/0 180.40.7.67 *Mar 1 16:25:23.988: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 1 16:25:23.988: IP: route map Prob1, item 10, permit *Mar 1 16:25:23.988: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:25:23.988: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 R3# R3# R3# RACK18AS>1 [Resuming connection 1 to r1 ... ] R1#sh ip int fa   e -0     e 0/1 Ethernet0/1 is up, line protocol is up Internet address is 180.40.7.131/27 Broadcast address is 255.255.255.255 Address determined by setup command MTU is 1500 bytes Helper address is not set Directed broadcast forwarding is disabled Multicast reserved groups joined: 224.0.0.5 224.0.0.6 Outgoing access list is not set Inbound access list is not set Proxy ARP is enabled Local Proxy ARP is disabled Security level is default Split horizon is enabled ICMP redirects are always sent ICMP unreachables are always sent ICMP mask replies are never sent IP fast switching is enabled IP fast switching on the same interface is disabled IP Flow switching is disabled IP CEF switching is disabled IP Fast switching turbo vector IP multicast fast switching is enabled --More--   R1#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/32 is subnetted, 1 subnets O 100.1.1.1 [110/11] via 180.40.7.130, 00:19:32, Ethernet0/1 20.0.0.0/24 is subnetted, 1 subnets O 20.10.1.0 [110/782] via 180.40.7.162, 00:19:32, Serial0/0.2 C 208.28.1.0/24 is directly connected, Ethernet0/0 192.10.32.0/32 is subnetted, 1 subnets O 192.10.32.18 [110/11] via 180.40.7.130, 00:19:32, Ethernet0/1 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, Ethernet0/1 O 180.40.7.162/32 [110/781] via 180.40.7.162, 00:19:33, Serial0/0.2 C 180.40.7.160/27 is directly connected, Serial0/0.2 O 180.40.7.0/27 [110/791] via 180.40.7.129, 00:19:33, Ethernet0/1 O 180.40.7.67/32 [110/781] via 180.40.7.162, 00:19:33, Serial0/0.2 --More--   R1# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#u all All possible debugging has been turned off R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#te  r trac Protocol [ip]: Target IP address: 20.10.1.1 2 Source address: 100.1.1.1         10  100.1.1.1 Numeric display [n]: y Timeout in seconds [3]: Probe count [3]: Minimum Time to Live [1]: Maximum Time to Live [30]: Port Number [33434]: Loose, Strict, Record, Timestamp, Verbose[none]: Type escape sequence to abort. Tracing the route to 20.10.1.2 1 180.40.7.129 0 msec 180.40.7.131 0 msec 180.40.7.129 0 msec 2 180.40.7.162 32 msec 180.40.7.2 16 msec 180.40.7.162 32 msec 3 20.10.1.2 24 msec * 16 msec R4# R4# R4# R4# R4#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 1 subnets O 20.10.1.0 [110/783] via 180.40.7.131, 00:22:24, FastEthernet0/0 [110/783] via 180.40.7.129, 00:22:24, FastEthernet0/0 O 208.28.1.0/24 [110/11] via 180.40.7.131, 00:22:24, FastEthernet0/0 C 192.10.32.0/24 is directly connected, Loopback1 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/782] via 180.40.7.131, 00:22:25, FastEthernet0/0 [110/782] via 180.40.7.129, 00:22:25, FastEthernet0/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:22:25, FastEthernet0/0 O 180.40.7.0/27 [110/782] via 180.40.7.129, 00:22:25, FastEthernet0/0 --More--   R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh int s 1/0 Serial1/0 is up, line protocol is up Hardware is CD2430 in sync mode Internet address is 180.40.7.66/27 MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 5956, LMI stat recvd 5957, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 3970/0, interface broadcasts 1986 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters 16:32:48 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/2/32 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 96 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec --More--   R3#sh int s 1/0 Serial1/0 is up, line protocol is up Hardware is CD2430 in sync mode Internet address is 180.40.7.66/27 MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 5957, LMI stat recvd 5958, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 3970/0, interface broadcasts 1986 Last input 00:00:01, output 00:00:03, output hang never Last clearing of "show interface" counters 16:33:00 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/2/32 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 96 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec --More--   12493 packets input, 1186636 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 11021 packets output, 543073 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up R3#sh int s 1/0 2 Serial1/2 is up, line protocol is up Hardware is CD2430 in sync mode Internet address is 180.40.7.1/27 MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation HDLC, loopback not set Keepalive set (10 sec) Last input 00:00:04, output 00:00:09, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/2/32 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 96 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 14249 packets input, 1138688 bytes, 0 no buffer Received 6950 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 13194 packets output, 1026715 bytes, 0 underruns 0 output errors, 0 collisions, 3 interface resets 0 output buffer failures, 0 output buffers swapped out --More--   R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#ping Protocol [ip]: Target IP address: 1 20.10.1.2 Repeat count [5]: 1000 Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: 100.1.1.1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 1000, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!!!!!!!!! RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh int s 1/0 Serial1/0 is up, line protocol is up Hardware is CD2430 in sync mode Internet address is 180.40.7.66/27 MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 5961, LMI stat recvd 5962, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 3972/0, interface broadcasts 1987 Last input 00:00:08, output 00:00:00, output hang never Last clearing of "show interface" counters 16:33:46 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/2/32 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 96 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec --More--   12500 packets input, 1186964 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 11099 packets output, 550666 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up R3#sh int s 1/0 Serial1/0 is up, line protocol is up Hardware is CD2430 in sync mode Internet address is 180.40.7.66/27 MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, reliability 255/255, txload 3/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 5962, LMI stat recvd 5963, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 3974/0, interface broadcasts 1988 Last input 00:00:03, output 00:00:00, output hang never Last clearing of "show interface" counters 16:33:51 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/2/32 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 96 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 3000 bits/sec, 3 packets/sec --More--   12501 packets input, 1186977 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 11150 packets output, 555970 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up R3# RACK18AS> [Resuming connection 3 to r3 ... ] R3#sh int s 1/0 2 Serial1/2 is up, line protocol is up Hardware is CD2430 in sync mode Internet address is 180.40.7.1/27 MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 7/255 Encapsulation HDLC, loopback not set Keepalive set (10 sec) Last input 00:00:00, output 00:00:01, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/2/32 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 96 kilobits/sec 5 minute input rate 4000 bits/sec, 4 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 14634 packets input, 1178488 bytes, 0 no buffer Received 6956 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 13203 packets output, 1027491 bytes, 0 underruns 0 output errors, 0 collisions, 3 interface resets 0 output buffer failures, 0 output buffers swapped out --More--   0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up R3# sh int s 1/2 Serial1/2 is up, line protocol is up Hardware is CD2430 in sync mode Internet address is 180.40.7.1/27 MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 7/255 Encapsulation HDLC, loopback not set Keepalive set (10 sec) Last input 00:00:00, output 00:00:04, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/2/32 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 96 kilobits/sec 5 minute input rate 4000 bits/sec, 4 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 14696 packets input, 1184936 bytes, 0 no buffer Received 6956 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 13203 packets output, 1027491 bytes, 0 underruns 0 output errors, 0 collisions, 3 interface resets 0 output buffer failures, 0 output buffers swapped out --More--   0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up R3#sh int s 1/2 Serial1/2 is up, line protocol is up Hardware is CD2430 in sync mode Internet address is 180.40.7.1/27 MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 9/255 Encapsulation HDLC, loopback not set Keepalive set (10 sec) Last input 00:00:00, output 00:00:06, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/2/32 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 96 kilobits/sec 5 minute input rate 5000 bits/sec, 5 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 14749 packets input, 1190428 bytes, 0 no buffer Received 6956 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 13203 packets output, 1027491 bytes, 0 underruns 0 output errors, 0 collisions, 3 interface resets 0 output buffer failures, 0 output buffers swapped out --More--   0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up R3# RACK18AS>1 [Resuming connection 1 to r1 ... ] R1#deb ip pack IP packet debugging is on R1# RACK18AS>4 [Resuming connection 4 to r4 ... ] !!!!!!!! !!!!!!!!!!!!!!!!!! RACK18AS>1 [Resuming connection 1 to r1 ... ] *Mar R1# *Mar 1 16:36:06.125: IP: s=180.40.7.130 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:36:06.754: IP: s=180.40.7.129 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 R1# *Mar 1 16:36:08.785: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:36:09.474: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast R1#deb ip pack      *Mar 1 16:36:10.211: IP: s=180.40.7.65 (local), d=224.0.0.5 (Serial0/0.1), len 80, sending broad/multicast R1#deb ip icmp ICMP packet debugging is on R1# *Mar 1 16:36:14.635: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast R1# *Mar 1 16:36:16.093: IP: s=180.40.7.130 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:36:16.754: IP: s=180.40.7.129 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 R1#u *Mar 1 16:36:18.781: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:36:19.475: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast R1#u all All possible debugging has been turned off R1# RACK18AS>4 [Resuming connection 4 to r4 ... ] !! R4#\  RACK18AS>2 [Resuming connection 2 to r2 ... ] R2#cvo  onfig t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#^Z R2# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh    config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip cef R3(config)#^Z R3# *Mar 1 16:43:18.037: %SYS-5-CONFIG_I: Configured from console by console R3# RACK18AS> [Resuming connection 3 to r3 ... ] R3#sh run | i ip cef ip cef R3# R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#sh c access-list R4#confi gt ^ % Invalid input detected at '^' marker. R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#access-list 100 per icmp any any R4(config)#access-list 100 per icmp any any naccess-list 100 per icmp any any oaccess-list 100 per icmp any any  access-list 100 per icmp any any  R4(config)#no access-list 100 per icmp any any access-list 100 per icmp any any  echo R4(config)#route  -map Po rob3 per 10 R4(config-route-map)#match ip address 100 R4(config-route-map)#set ip net  R4(config-route-map)#set ip next-hop 180., 40.7.129 R4(config-route-map)#exit R4(config)#ip lo R4(config)#ip local ? policy Enable policy routing pool IP Local address pool lists R4(config)#ip local po R4(config)#ip local pol R4(config)#ip local policy ? route-map Policy route map R4(config)#ip local policy route-map Prob3 ? R4(config)#ip local policy route-map Prob3   R4(config)#^Z R4# *Mar 1 16:50:33.827: %SYS-5-CONFIG_I: Configured from console by console R4#trace 20.10.1.1 Type escape sequence to abort. Tracing the route to 20.10.1.1 1 180.40.7.131 24 msec 180.40.7.129 0 msec 180.40.7.131 20 msec 2 180.40.7.67 28 msec 180.40.7.162 56 msec * R4#ping RACK18AS>3 [Resuming connection 3 to r3 ... ] R3# R3#clea log Clear logging buffer [confirm] R3#deb ip o pol Policy routing debugging is on R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] Protocol [ip]: Target IP address: 20.10.1.2 Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: 100.1.1.1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/47/48 ms R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Ma33: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 1 16:49:14.233: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 1 16:49:14.233: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding *Mar 1 16:49:14.281: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar R3# R3#1 16:49:14.281: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 1 16:49:14.281: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding *Mar 1 16:49:14.329: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 1 16:49:14.329: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 1 16:49:14.329: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding R3#sh log Syslog logging: enabled (0 messages dropped, 12 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 3999 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 3959 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 60 message lines logged --More--   Log Buffer (4096 bytes): *Mar 1 16:49:14.136: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 1 16:49:14.136: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 1 16:49:14.136: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding *Mar 1 16:49:14.184: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 1 16:49:14.184: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 1 16:49:14.184: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding *Mar 1 16:49:14.233: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 1 16:49:14.233: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 1 16:49:14.233: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding *Mar 1 16:49:14.281: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 1 16:49:14.281: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 1 16:49:14.281: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding --More--  *Mar 1 16:49:14.329: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 1 16:49:14.329: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 1 16:49:14.329: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#no ip cef R3(config)#^Z R3#cle *Mar 1 16:50:29.921: %SYS-5-CONFIG_I: Configured from console by console R3#clea log Clear logging buffer [confirm] R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#100.1.1.1y 20.10.1.2ping  Protocol [ip]: Target IP address: ping 100.1.1.1y 20.10.1.2 Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: y20.10.1.2ping 100.1.1.1y 100.1.1.1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 48/48/48 ms R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] *n 100, policy match *Mar 1 16:50:45.366: IP: route map Prob1, item 10, permit *Mar 1 16:50:45.366: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:50:45.366: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 1 16:50:45.414: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 1 16:50:45.414: IP: route map Prob1, item 10, permit *Mar 1 16:50:45.414: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:50:45.414: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 1 16:50:45 R3# R3#.462: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 1 16:50:45.462: IP: route map Prob1, item 10, permit *Mar 1 16:50:45.462: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:50:45.466: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 1 16:50:45.510: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 1 16:50:45.514: IP: route map Prob1, item 10, permit *Mar 1 16:50:45.514: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:50:45.514: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 R3#confi gt  t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip d cef R3(config)#^Z R3# *Mar 1 16:51:19.726: PR-RP: Set FastEthernet0/0 policy_routemap=Prob1; cached_map=Prob1 *Mar 1 16:51:19.746: PR-RP: Set FastEthernet0/0 policy_routemap=Prob1; cached_map=Prob1 R3# *Mar 1 16:51:20.848: %SYS-5-CONFIG_I: Configured from console by console R3# R3# R3# R3# R3#sh cef ? drop Classify packets dropped events CEF events interface CEF interface status and configuration not-cef-switched Packets passed on to next switching layer timers CEF timers R3#sh cef     ip cef ? A.B.C.D prefix of entries to show Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Group-Async Async Group interface Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Null Null interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-Access Virtual Access interface Virtual-FrameRelay Virtual Frame Relay interface Virtual-Template Virtual Template interface Virtual-TokenRing Virtual TokenRing adjacency Display all prefixes resolving through adjacency detail Display full information --More--   epoch Display epoch information events Show CEF table events exact-route Display exact route for a session inconsistency Show table inconsistency information non-recursive Display non-recursive routes only summary CEF table summary traffic Display traffic statistics unresolved Display unresolved routes only vrf Show VPN Routing/Forwarding instance CEF table | Output modifiers R3#sh ip cef Prefix Next Hop Interface 0.0.0.0/0 drop Null0 (default route handler entry) 0.0.0.0/32 receive 20.10.1.0/24 180.40.7.2 Serial1/2 180.40.7.67 Serial1/0 100.1.1.1/32 180.40.7.130 FastEthernet0/0 180.40.7.0/27 attached Serial1/2 180.40.7.0/32 receive 180.40.7.1/32 receive 180.40.7.31/32 receive 180.40.7.64/27 attached Serial1/0 180.40.7.64/32 receive 180.40.7.65/32 180.40.7.131 FastEthernet0/0 180.40.7.66/32 receive 180.40.7.67/32 180.40.7.2 Serial1/2 180.40.7.67 Serial1/0 180.40.7.95/32 receive 180.40.7.128/27 attached FastEthernet0/0 180.40.7.128/32 receive 180.40.7.129/32 receive 180.40.7.130/32 180.40.7.130 FastEthernet0/0 180.40.7.131/32 180.40.7.131 FastEthernet0/0 180.40.7.159/32 receive --More--  Prefix Next Hop Interface 180.40.7.161/32 180.40.7.131 FastEthernet0/0 180.40.7.162/32 180.40.7.2 Serial1/2 180.40.7.67 Serial1/0 192.10.32.18/32 180.40.7.130 FastEthernet0/0 208.28.1.0/24 180.40.7.131 FastEthernet0/0 224.0.0.0/4 drop 224.0.0.0/24 receive 255.255.255.255/32 receive R3#exit R3 con0 is now available Press RETURN to get started. R3> R3> R3>en R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#no ip cef R3(config)#int fa 0/0 R3(config-if)#iup    p route R3(config-if)#ip route- R3(config-if)#ip route-cache po R3(config-if)#ip route-cache policy ? R3(config-if)#ip route-cache policy R3(config-if)#^Z R3# *Mar 1 16:55:13.662: %SYS-5-CONFIG_I: Configured from console by console R3#sh deb Policy Routing: Policy routing debugging is on R3#cclea      lea log Clear logging buffer [confirm] R3#sh ip cef %CEF not running Prefix Next Hop Interface R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#ping Protocol [ip]: Target IP address: 20.10.1.1 2 Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: 100.1.1.1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/46/48 ms R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Mar R3#sh log Syslog logging: enabled (0 messages dropped, 12 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 4046 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 4006 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 63 message lines logged --More--   Log Buffer (4096 bytes): *Mar 1 16:55:39.733: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 1 16:55:39.733: IP: route map Prob1, item 10, permit *Mar 1 16:55:39.733: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:55:39.733: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 R3# sh log Syslog logging: enabled (0 messages dropped, 12 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 4046 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 4006 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 63 message lines logged --More--   Log Buffer (4096 bytes): *Mar 1 16:55:39.733: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 1 16:55:39.733: IP: route map Prob1, item 10, permit *Mar 1 16:55:39.733: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:55:39.733: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#100.1.1.1y 20.10.1.2ping  Protocol [ip]: Target IP address: ping100.1.1.1y 20.10.1.2 Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: y20.10.1.2ping 100.1.1.1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/46/48 ms R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh log Syslog logging: enabled (0 messages dropped, 12 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 4046 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 4006 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 63 message lines logged --More--   Log Buffer (4096 bytes): *Mar 1 16:55:39.733: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 1 16:55:39.733: IP: route map Prob1, item 10, permit *Mar 1 16:55:39.733: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 1 16:55:39.733: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 R3# R3# R3# R3# R3# R3#sh run int fa 0/09 ^ % Invalid input detected at '^' marker. R3#sh run int fa 0/09  Building configuration... Current configuration : 149 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip route-cache policy ip policy route-map Prob1 duplex auto speed auto end R3# R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#sh run | | b route     ip local ip local policy route-map Prob3 no ip http server ip classless ! ! ! access-list 100 permit icmp any any echo ! route-map Prob3 permit 10 match ip address 100 set ip next-hop 180.40.7.129 ! call rsvp-sync ! ! mgcp profile default ! dial-peer cor custom ! ! ! ! line con 0 --More--   R4# R4# RACK18AS>2 [Resuming connection 2 to r2 ... ] *Mar R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0.1 R2(config-subif)#tra R2(config-subif)#traffic-shape ? adaptive Enable Traffic Shaping adaptation to BECN fecn-adapt Enable Traffic Shaping reflection of FECN as BECN group configure token bucket: group CIR (bps) [Bc (bits) [Be (bits)]] rate configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]] R2(config-subif)#traffic-shape               tr R2(config-subif)#traffic-shape ? adaptive Enable Traffic Shaping adaptation to BECN fecn-adapt Enable Traffic Shaping reflection of FECN as BECN group configure token bucket: group CIR (bps) [Bc (bits) [Be (bits)]] rate configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]] R2(config-subif)#traffic-shape rate ? <8000-100000000> Target Bit Rate (bits per second) R2(config-subif)#traffic-shape rate 64000 ? <0-100000000> bits per interval, sustained R2(config-subif)#traffic-shape rate 64000 R2(config-subif)#traffic-shape rate 64000 int s 1/0.1  2 R2(config-subif)#int s 1/0.2traffic-shape rate 64000 R2(config-subif)#do sh       ^Z R2#sh *Mar 1 17:01:31.569: %SYS-5-CONFIG_I: Configured from console by console R2#sh tra R2#sh traf R2#sh traffic-shape ? Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Null Null interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-FrameRelay Virtual Frame Relay interface Virtual-Template Virtual Template interface Virtual-TokenRing Virtual TokenRing queue Show shaping queue contents statistics traffic rate shaping statistics | Output modifiers R2#sh traffic-shape Interface Se1/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active - 64000 2000 8000 8000 125 1000 - Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active - 64000 2000 8000 8000 125 1000 - R2#sh run | b int  erface Serial1/0 interface Serial1/0 no ip address encapsulation frame-relay ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint traffic-shape rate 64000 8000 8000 1000 frame-relay interface-dlci 203 ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint traffic-shape rate 64000 8000 8000 1000 frame-relay interface-dlci 201 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 clockrate 64000 --More--   R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0.1 R2(config-subif)#int s 1/0.1traffic-shape rate 64000 ntraffic-shape rate 64000 otraffic-shape rate 64000  traffic-shape rate 64000  R2(config-subif)#no traffic-shape rate 64000 int s 1/0.1  2 R2(config-subif)#int s 1/0.2no traffic-shape rate 64000 R2(config-subif)#int s 1/0 R2(config-if)#tra R2(config-if)#traf R2(config-if)#traffic-shape rate 64000 R2(config-if)#^Z R2#sh *Mar 1 17:03:00.940: %SYS-5-CONFIG_I: Configured from console by console R2#sh traff R2#sh traffic-shape Interface Se1/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active - 64000 2000 8000 8000 125 1000 - R2# R2# R2# R2# R2#sh run |   int s 1/0/0 Building configuration... Current configuration : 110 bytes ! interface Serial1/0 no ip address encapsulation frame-relay traffic-shape rate 64000 8000 8000 1000 end R2# R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0 R2(config-if)#no int s 1/0traffic-shape rate 64000ntraffic-shape rate 64000otraffic-shape rate 64000 traffic-shape rate 64000 R2(config-if)#exit R2(config)#map-clas R2(config)#map-class fr R2(config)#map-class frame-relay ? WORD Static map class name R2(config)#map-class frame-relay Prob4 ? R2(config)#map-class frame-relay Prob4 R2(config-map-class)#? Static maps class configuration commands: default Set a command to its defaults exit-class Exit from static map class configuration mode frame-relay Configure Map parameters help Description of the interactive help system no Negate a command or set its defaults service-policy class-based service policy R2(config-map-class)#fram ? adaptive-shaping Adaptive traffic rate adjustment, Default = none bc Committed burst size (Bc), Default = 56000 bits be Excess burst size (Be), Default = 0 bits cir Committed Information Rate (CIR), Default = 56000 bps congestion Congestion management parameters custom-queue-list VC custom queueing end-to-end Configure frame-relay end-to-end VC parameters fair-queue VC fair queueing fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fragment fragmentation - Requires Frame Relay traffic-shaping to be configured at the interface level holdq Hold queue size for VC idle-timer Idle timeout for a SVC, Default = 120 sec interface-queue PVC interface queue parameters ip Assign a priority queue for RTP streams mincir Minimum acceptable CIR, Default = CIR/2 bps priority-group VC priority queueing tc Policing Measurement Interval (Tc) traffic-rate VC traffic rate voice voice options R2(config-map-class)#fram cir ? <1-45000000> Applied to both Incoming/Outgoing CIR, Bits per second in Incoming CIR out Outgoing CIR R2(config-map-class)#fram cir 64000 R2(config-map-class)#int s 1/0.1 R2(config-subif)#fram > ? class Define a map class on the interface de-group Associate a DE group with a DLCI interface-dlci Define a DLCI on an interface/subinterface inverse-arp Enable/disable FR inverse ARP ip Frame Relay Internet Protocol config commands map Map a protocol address to a DLCI address payload-compression Use payload compression priority-dlci-group Define a priority group of DLCIs vc-bundle configure a frame-relay vc-bundle R2(config-subif)#fram map ? appletalk AppleTalk bridge Bridging bstun Block Serial Tunnel clns ISO CLNS decnet DECnet dlsw Data Link Switching ip IP ipv6 IPV6 ipx Novell IPX llc2 llc2 pppoe PPP over Ethernet qllc qllc protocol rsrb Remote Source-Route Bridging stun Serial Tunnel R2(config-subif)#fram map          fram class ? WORD map class name R2(config-subif)#fram class Prob4 ? R2(config-subif)#fram class Prob4 R2(config-subif)#do sh run int s 1/0.1 Building configuration... Current configuration : 181 bytes ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint frame-relay class Prob4 frame-relay interface-dlci 203 end R2(config-subif)# R2(config-subif)# R2(config-subif)# R2(config-subif)# R2(config-subif)# R2(config-subif)#int s 1/0.2 R2(config-subif)#f do sh run int s 1/0.2 Building configuration... Current configuration : 157 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 201 end R2(config-subif)#frame-relay interface-dlci 201 ? cisco Use CISCO Encapsulation ietf Use RFC1490/RFC2427 Encapsulation ppp Use RFC1973 Encapsulation to support PPP over FR protocol Optional protocol information for remote end R2(config-subif)#frame-relay interface-dlci 201 %PVC is already defined R2(config-fr-dlci)#? Frame Relay dlci configuration commands: auto Configure Automation class Assign a mapclass to a dlci default Set a command to its defaults exit Exit from FR dlci configuration mode load-interval Specify interval for load calculation for a dlci no Negate a command or set its defaults vofr Voice over Frame-Relay R2(config-fr-dlci)#class ? WORD map class name R2(config-fr-dlci)#class Prob4 R2(config-fr-dlci)#^Z R2#sh *Mar 1 17:06:39.282: %SYS-5-CONFIG_I: Configured from console by console R2#sh traf R2#sh traffic-shape R2#sh traffic-shape               frram     am ? end-to-end Frame-relay end-to-end VC information fragment show frame relay fragmentation information ip show frame relay IP statistics lapf show frame relay lapf status/statistics lmi show frame relay lmi statistics map Frame-Relay map table multilink Show Multilink Frame Relay bundle information pvc show frame relay pvc statistics qos-autosense show frame relay qos-autosense information route show frame relay route svc show frame relay SVC stuff traffic Frame-Relay protocol statistics vc-bundle FR VC-Bundle vofr Show frame-relay VoFR statistics R2#sh fram tre R2#sh fram tre a R2#sh fram traffic ? | Output modifiers R2#sh fram traffic Frame Relay statistics: ARP requests sent 0, ARP replies sent 0 ARP request recvd 0, ARP replies recvd 0 R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0 R2(config-if)#fram ? accounting Special accounting instruction address-reg ELMI address registration broadcast-queue Define a broadcast queue and transmit rate class Define a map class on the interface congestion-management Enable Frame Relay congestion management de-group Associate a DE group with a DLCI fragment Enable end-to-end fragmentation for all PVCs fragmentation Adaptive fragmentation interface-dlci Define a DLCI on an interface/subinterface interface-queue configure PVC interface queueing intf-type Configure a FR DTE/DCE/NNI interface inverse-arp Enable/disable FR inverse ARP ip Frame Relay Internet Protocol config commands lapf set LAPF parameter lmi-n391dte set full status polling counter lmi-n392dce LMI error threshold lmi-n392dte LMI error threshold lmi-n393dce set LMI monitored event count lmi-n393dte set LMI monitored event count lmi-t392dce set DCE polling verification timer lmi-type Use CISCO-ANSI-CCITT type LMI local-dlci Set source DLCI when LMI is not supported --More--   map Map a protocol address to a DLCI address multicast-dlci Set DLCI of a multicast group policing Enable Frame Relay policing priority-dlci-group Define a priority group of DLCIs qos-autosense enable QOS autosense route frame relay route for pvc switching svc Enable frame relay SVCs traffic-shaping Enable Frame Relay Traffic Shaping traps-maximum set max traps FR generates at link up or when getting LMI Full Status message vc-bundle configure a frame-relay vc-bundle R2(config-if)#fram tr R2(config-if)#fram traf R2(config-if)#fram traffic-shaping ? R2(config-if)#fram traffic-shaping R2(config-if)#^Z R2#config tsh fram traffic traffic-shape *Mar 1 17:07:22.144: %SYS-5-CONFIG_I: Configured from console by console R2#sh traffic-shape Interface Se1/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 207 56000 875 7000 0 125 875 - Interface Se1/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 203 64000 1000 64000 0 125 1000 - Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 201 64000 1000 64000 0 125 1000 - R2# R2# R2# R2# R2# R2#sh run Building configuration... Current configuration : 1827 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R2 ! logging queue-limit 100 ! ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 mpls ldp logging neighbor-changes ! ! ! --More--   R2#sh run | b intface      erface Serial  1/0 interface Serial1/0 no ip address encapsulation frame-relay no fair-queue frame-relay traffic-shaping ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint frame-relay class Prob4 frame-relay interface-dlci 203 ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 201 class Prob4 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 --More--   ip address 180.40.7.2 255.255.255.224 clockrate 64000 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! --More--  router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server no ip http secure-server ip classless ! ! ! ! map-class frame-relay Prob4 frame-relay cir 64000 ! ! call rsvp-sync ! ! mgcp profile default ! ! ! dial-peer cor custom --More--   R2#sh traff R2#sh traffic-shape Interface Se1/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 207 56000 875 7000 0 125 875 - Interface Se1/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 203 64000 1000 64000 0 125 1000 - Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 201 64000 1000 64000 0 125 1000 - R2# R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#fram traffic-shaping int s 1/0 class Prob4frame-relay interface-dlci 201 do sh run int s 1/0.2 int s 1/0.2 do sh run int s 1/0.1fram class Prob4 int s 1/0.1 fram class Prob4 int s 1/0.1 fram cir 64000map-class frame-relay Prob4 R2(config-map-class)#? Static maps class configuration commands: default Set a command to its defaults exit-class Exit from static map class configuration mode frame-relay Configure Map parameters help Description of the interactive help system no Negate a command or set its defaults service-policy class-based service policy R2(config-map-class)#fram ? adaptive-shaping Adaptive traffic rate adjustment, Default = none bc Committed burst size (Bc), Default = 56000 bits be Excess burst size (Be), Default = 0 bits cir Committed Information Rate (CIR), Default = 56000 bps congestion Congestion management parameters custom-queue-list VC custom queueing end-to-end Configure frame-relay end-to-end VC parameters fair-queue VC fair queueing fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fragment fragmentation - Requires Frame Relay traffic-shaping to be configured at the interface level holdq Hold queue size for VC idle-timer Idle timeout for a SVC, Default = 120 sec interface-queue PVC interface queue parameters ip Assign a priority queue for RTP streams mincir Minimum acceptable CIR, Default = CIR/2 bps priority-group VC priority queueing tc Policing Measurement Interval (Tc) traffic-rate VC traffic rate voice voice options R2(config-map-class)#fram adaptive-shaping ? becn Enable rate adjustment in response to BECN foresight Enable rate adjustment in response to ForeSight messages and BECN interface-congestion Enable rate adjustment depend on interface queue R2(config-map-class)#fram adaptive-shaping becn ? R2(config-map-class)#fram adaptive-shaping becn R2(config-map-class)#fram mincir ? <1000-45000000> Applied to both Incoming/Outgoing CIR, Bits per second in Incoming minimum acceptable CIR (Frame-Relay SVC only) out Outgoing minimum acceptable CIR R2(config-map-class)#fram mincir 32000 R2(config-map-class)#^Z R2#sh run *Mar 1 17:10:37.308: %SYS-5-CONFIG_I: Configured from console by console R2#sh runconfig tsh traffic-shape run | b interface Serial1/0 interface Serial1/0 no ip address encapsulation frame-relay no fair-queue frame-relay traffic-shaping ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint frame-relay class Prob4 frame-relay interface-dlci 203 ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 201 class Prob4 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 --More--   ip address 180.40.7.2 255.255.255.224 clockrate 64000 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! --More--  router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server no ip http secure-server ip classless ! ! ! ! map-class frame-relay Prob4 frame-relay cir 64000 frame-relay mincir 32000 frame-relay adaptive-shaping becn ! ! call rsvp-sync ! ! mgcp profile default ! ! --More--   R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#no f map-cl;a  as fram Prob4 R2(config)#int s 1/0 R2(config-if)#no fram traff R2(config-if)#uib   int s 1/0.1 R2(config-subif)#no class Prob4 ^ % Invalid input detected at '^' marker. R2(config-subif)#do shrun      run int s 1/01 Building configuration... Current configuration : 52 bytes ! interface Serial1/1 no ip address shutdown end R2(config-subif)#do sh run int s 1/01.1 Building configuration... Current configuration : 156 bytes ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 203 end R2(config-subif)#do sh run int s 1/0.1 2 Building configuration... Current configuration : 157 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 201 end R2(config-subif)#traf R2(config-subif)#traffic-shape ? adaptive Enable Traffic Shaping adaptation to BECN fecn-adapt Enable Traffic Shaping reflection of FECN as BECN group configure token bucket: group CIR (bps) [Bc (bits) [Be (bits)]] rate configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]] R2(config-subif)#traffic-shape rate 64000 R2(config-subif)#traffic-shape rate 64000          ad R2(config-subif)#traffic-shape adaptive ? <1-100000000> Lower Bound Target Bit Rate (bits per second) R2(config-subif)#traffic-shape adaptive 32000 ? R2(config-subif)#traffic-shape adaptive 32000   R2(config-subif)#int s 1/0.1 R2(config-subif)#int s 1/0.1traffic-shape adaptive 32000rate 64000  R2(config-subif)#traffic-shape rate 64000int s 1/0.1 traffic-shape adaptive 32000rate 64000 adaptive 32000 R2(config-subif)#^Z R2# *Mar 1 17:13:14.337: %SYS-5-CONFIG_I: Configured from console by console R2#sh run | config t sh run | b interface Serial1/0config t sh run | b interface Serial1/0 interface Serial1/0 no ip address encapsulation frame-relay no fair-queue ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint traffic-shape rate 64000 8000 8000 1000 traffic-shape adaptive 32000 frame-relay interface-dlci 203 ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 201 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 --More--   R2# R2# RACK18AS>1 [Resuming connection 1 to r1 ... ] R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#do sh access-list R1(config)#access-list p 100 per tcop    p host 208.28.1.2 any eq 23 R1(config)#access-list 100 per tcp host 208.28.1.2 any eq 23     cp host 208.28.1.2 any p host 208.28.1.2 any ip host 208.28.1.2 any  per ip host 208.28.1.2 any 1 per ip host 208.28.1.2 any  R1(config)#class-m, ap R1(config)#class-map ? WORD class-map name match-all Logical-AND all matching statements under this classmap match-any Logical-OR all matching statements under this classmap R1(config)#class-map S5Telnet ? R1(config)#class-map S5Telnet R1(config-cmap)#matfh    ch ? access-group Access group any Any packets class-map Class map cos IEEE 802.1Q/ISL class of service/user priority values destination-address Destination address discard-class Discard behavior identifier dscp Match DSCP in IP(v4) and IPv6 packets fr-de Match on Frame-relay DE bit fr-dlci Match on fr-dlci input-interface Select an input interface to match ip IP specific values mpls Multi Protocol Label Switching specific values not Negate this match result packet Layer 3 Packet length precedence Match Precedence in IP(v4) and IPv6 packets protocol Protocol qos-group Qos-group source-address Source address R1(config-cmap)#match acc R1(config-cmap)#match access-group ? <1-2699> Access list index name Named Access List R1(config-cmap)#match access-group 100 R1(config-cmap)#exit R1(config)#exitmatch access-group 100class-map S5Telnet       O t h e r S t u d d   f f  R1(config-cmap)#class-map S5OtherStuff exit match access-group 100 1 R1(config-cmap)#exit R1(config)#pol R1(config)#policy-map ? WORD policy-map name R1(config)#policy-map Prov b6 ? R1(config)#policy-map Prob6 R1(config-pmap)#? QoS policy-map configuration commands: class policy criteria description Policy-Map description exit Exit from QoS policy-map configuration mode no Negate or set default values of a command rename Rename this policy-map R1(config-pmap)#class ? WORD class-map name class-default System default class matching otherwise unclassified packets R1(config-pmap)#class S5Telnet R1(config-pmap-c)#? QoS policy-map class configuration commands: bandwidth Bandwidth compression Activate Compression drop Drop all packets exit Exit from QoS class action configuration mode no Negate or set default values of a command police Police priority Strict Scheduling Priority for this Class queue-limit Queue Max Threshold for Tail Drop random-detect Enable Random Early Detection as drop policy service-policy Configure QoS Service Policy set Set QoS values shape Traffic Shaping R1(config-pmap-c)#ba R1(config-pmap-c)#bandwidth ? <8-2000000> Kilo Bits per second percent % of total Bandwidth remaining % of the remaining bandwidth R1(config-pmap-c)#bandwidth 1000 R1(config-pmap-c)#exit R1(config-pmap)#class S5OtherStuff R1(config-pmap-c)#pol R1(config-pmap-c)#police ? <8000-2000000000> Bits per second cir Committed information rate R1(config-pmap-c)#police 5000000 ? <1000-512000000> Burst bytes bc Conform burst conform-action action when rate is less than conform burst pir Peak Information Rate R1(config-pmap-c)#police 5000000 con R1(config-pmap-c)#police 5000000 conform-action ? drop drop packet exceed-action action when rate is within conform and conform + exceed burst set-clp-transmit set atm clp and send it set-discard-class-transmit set discard-class and send it set-dscp-transmit set dscp and send it set-frde-transmit set FR DE and send it set-mpls-exp-imposition-transmit set exp at tag imposition and send it set-mpls-exp-topmost-transmit set exp on topmost label and send it set-prec-transmit rewrite packet precedence and send it set-qos-transmit set qos-group and send it transmit transmit packet R1(config-pmap-c)#police 5000000 conform-action tr R1(config-pmap-c)#police 5000000 conform-action transmit ? exceed-action action when rate is within conform and conform + exceed burst R1(config-pmap-c)#police 5000000 conform-action transmit ex R1(config-pmap-c)#police 5000000 conform-action transmit exceed-action ? drop drop packet set-clp-transmit set atm clp and send it set-discard-class-transmit set discard-class and send it set-dscp-transmit set dscp and send it set-frde-transmit set FR DE and send it set-mpls-exp-imposition-transmit set exp at tag imposition and send it set-mpls-exp-topmost-transmit set exp on topmost label and send it set-prec-transmit rewrite packet precedence and send it set-qos-transmit set qos-group and send it transmit transmit packet R1(config-pmap-c)#police 5000000 conform-action transmit exceed-action s R1(config-pmap-c)#police 5000000 conform-action transmit exceed-action set-p R1(config-pmap-c)#$m-action transmit exceed-action set-prec-transmit ? <0-7> new precedence R1(config-pmap-c)#$m-action transmit exceed-action set-prec-transmit 3 ? violate-action action when rate is greater than conform + exceed burst R1(config-pmap-c)#$m-action transmit exceed-action set-prec-transmit 3 R1(config-pmap-c-police)#exit R1(config-pmap-c)#do sh pol R1(config-pmap-c)#do sh pol Policy Map Prob6 Class S5Telnet Bandwidth 1000 (kbps) Max Threshold 64 (packets) Class S5OtherStuff police cir 5000000 bc 156250 conform-action transmit exceed-action set-prec-transmit 3 R1(config-pmap-c)# R1(config-pmap-c)# R1(config-pmap-c)# R1(config-pmap-c)#int s 1/0 ^ % Invalid input detected at '^' marker. R1(config)#int s 1/0 1/0 e 1/0 ^ % Invalid input detected at '^' marker. R1(config)#int e 1/0/0   0/1 R1(config-if)#ser R1(config-if)#service-policy ? history Keep history of QoS metrics input Assign policy-map to the input of an interface output Assign policy-map to the output of an interface R1(config-if)#service-policy out ? WORD policy-map name R1(config-if)#service-policy out Prob6 ? R1(config-if)#service-policy out Prob6   R1(config-if)#^Z R1# *Mar 1 17:29:39.132: %SYS-5-CONFIG_I: Configured from console by console R1#sh run | b class class-map match-all S5Telnet match access-group 100 class-map match-all S5OtherStuff match access-group 101 ! ! policy-map Prob6 class S5Telnet bandwidth 1000 class S5OtherStuff police cir 5000000 conform-action transmit exceed-action set-prec-transmit 3 ! ! ! ! interface Ethernet0/0 ip address 208.28.1.1 255.255.255.0 half-duplex ! interface Serial0/0 bandwidth 128 --More--   no ip address encapsulation frame-relay ! interface Serial0/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 103 ! interface Serial0/0.2 point-to-point bandwidth 128 ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 102 ! interface Ethernet0/1 ip address 180.40.7.131 255.255.255.224 service-policy output Prob6 half-duplex ! interface Serial0/1 no ip address shutdown ! --More--  router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server ip classless ! ! ! access-list 100 permit tcp host 208.28.1.2 any eq telnet access-list 101 permit ip host 208.28.1.2 any ! ! call rsvp-sync ! ! mgcp profile default ! dial-peer cor custom ! ! ! ! --More--   R1#sh pol R1#sh policy-map int e 0/12  Ethernet0/1 Service-policy output: Prob6 Class-map: S5Telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 100 Queueing Output Queue: Conversation 265 Bandwidth 1000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: S5OtherStuff (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 101 police: cir 5000000 bps, bc 156250 bytes conformed 0 packets, 0 bytes; actions: transmit exceeded 0 packets, 0 bytes; actions: --More--   set-prec-transmit 3 conformed 0 bps, exceed 0 bps Class-map: class-default (match-any) 19 packets, 2084 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R1# R1# R1# R1# R1# R1# R1# R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#pri R1(config)#prio R1(config)#priority-list ? <1-16> Priority list number R1(config)#priority-list 1 ? default Set priority queue for unspecified datagrams interface Establish priorities for packets from a named interface protocol priority queueing by protocol queue-limit Set queue limits for priority queues R1(config)#priority-list 1 pro R1(config)#priority-list 1 protocol ? arp IP ARP bridge Bridging bstun Block Serial Tunnel cdp Cisco Discovery Protocol clns ISO CLNS clns_es ISO CLNS End System clns_is ISO CLNS Intermediate System cmns ISO CMNS compressedtcp Compressed TCP decnet DECnet decnet_node DECnet Node decnet_router-l1 DECnet Router L1 decnet_router-l2 DECnet Router L2 dlsw Data Link Switching ip IP ipv6 IPV6 ipx Novell IPX llc2 llc2 pad PAD links pppoe PPP over Ethernet qllc qllc protocol rsrb Remote Source-Route Bridging --More--   snapshot Snapshot routing support stun Serial Tunnel R1(config)#priority-list 1 protocol ip ? high medium normal low R1(config)#priority-list 1 protocol ip high ? fragments Prioritize fragmented IP packets gt Prioritize packets greater than a specified size list To specify an access list lt Prioritize packets less than a specified size tcp Prioritize TCP packets 'to' or 'from' the specified port udp Prioritize UDP packets 'to' or 'from' the specified port R1(config)#priority-list 1 protocol ip high tcp ? <0-65535> Port number bgp Border Gateway Protocol (179) chargen Character generator (19) cmd Remote commands (rcmd, 514) daytime Daytime (13) discard Discard (9) domain Domain Name Service (53) echo Echo (7) exec Exec (rsh, 512) finger Finger (79) ftp File Transfer Protocol (21) ftp-data FTP data connections (20) gopher Gopher (70) hostname NIC hostname server (101) ident Ident Protocol (113) irc Internet Relay Chat (194) klogin Kerberos login (543) kshell Kerberos shell (544) login Login (rlogin, 513) lpd Printer service (515) nntp Network News Transport Protocol (119) pim-auto-rp PIM Auto-RP (496) --More--   R1(config)#priority-list 1 protocol ip high tcp el  telnet ? R1(config)#priority-list 1 protocol ip high tcp telnet   R1(config)#priority-list 1 protocol ip high tcp telnet                  ip low tcp ? <0-65535> Port number bgp Border Gateway Protocol (179) chargen Character generator (19) cmd Remote commands (rcmd, 514) daytime Daytime (13) discard Discard (9) domain Domain Name Service (53) echo Echo (7) exec Exec (rsh, 512) finger Finger (79) ftp File Transfer Protocol (21) ftp-data FTP data connections (20) gopher Gopher (70) hostname NIC hostname server (101) ident Ident Protocol (113) irc Internet Relay Chat (194) klogin Kerberos login (543) kshell Kerberos shell (544) login Login (rlogin, 513) lpd Printer service (515) nntp Network News Transport Protocol (119) pim-auto-rp PIM Auto-RP (496) --More--   pop2 Post Office Protocol v2 (109) pop3 Post Office Protocol v3 (110) smtp Simple Mail Transport Protocol (25) sunrpc Sun Remote Procedure Call (111) syslog Syslog (514) tacacs TAC Access Control System (49) talk Talk (517) telnet Telnet (23) time Time (37) uucp Unix-to-Unix Copy Program (540) whois Nicname (43) www World Wide Web (HTTP, 80) R1(config)#priority-list 1 protocol ip low tcp www R1(config)#int s 0/0.2 R1(config-subif)#pri R1(config-subif)#pri? % Unrecognized command R1(config-subif)#pri   ? Interface configuration commands: arp Set arp type (arpa, probe, snap) or timeout backup Modify backup parameters bandwidth Set bandwidth informational parameter bgp-policy Apply policy propogated by bgp community string bridge-group Transparent bridging interface parameters cdp CDP interface subcommands clns CLNS interface subcommands decnet Interface DECnet config commands default Set a command to its defaults delay Specify interface throughput delay description Interface specific description dlsw DLSw Interface Subcommands dspu Down Stream PU dxi ATM-DXI configuration commands exit Exit from interface configuration mode frame-relay Set frame relay parameters fras DLC Switch Interface Command h323-gateway Configure H323 Gateway ip Interface Internet Protocol config commands ipv6 IPv6 interface subcommands ipx Novell/IPX interface subcommands --More--   isis IS-IS commands iso-igrp ISO-IGRP interface subcommands keepalive Enable keepalive llc2 LLC2 Interface Subcommands map-group Configure static map group mpls Configure MPLS interface parameters mtu Set the interface Maximum Transmission Unit (MTU) multiring Enable RIF usage for a routable protocol netbios Use a defined NETBIOS access list or enable name-caching no Negate a command or set its defaults ntp Configure NTP pulse-time Force DTR low during resets rate-limit Rate Limit service-policy Configure QoS Service Policy shutdown Shutdown the selected interface smds Modify SMDS parameters sna SNA pu configuration snapshot Configure snapshot support on the interface source-bridge Configure interface for source-route bridging tag-switching Tag Switching interface configuration commands tarp TARP interface subcommands timeout Define timeout values for this interface traffic-shape Enable Traffic Shaping on an Interface or Sub-Interface --More--   R1(config-subif)#int s 0/0 R1(config-if)#po R1(config-if)#po  p pri R1(config-if)#priority-group 1 ? R1(config-if)#priority-group 1 R1(config-if)#^Z R1#de *Mar 1 17:34:17.708: %SYS-5-CONFIG_I: Configured from console by console R1#deb pri R1#deb pri   qu R1#deb que? % Unrecognized command R1#deb que       deb ? aaa AAA Authentication, Authorization and Accounting aal2_xgcpspi AAL2_XGCP Service Provider Interface. access-expression Boolean access expression adjacency adjacency alarm-interface Alarm Interface Card events all Enable all debugging alps ALPS debug information arp IP ARP and HP Probe transactions aspp ASPP information async Async interface information backhaul-session-manager Backhaul SM options backup Backup events bgp BGP information bsc BSC information bstun BSTUN information call Call Information callback Callback activity cca CCA activity ccaal2 ccaal2 information ccfrf11 CCFRF11 information cch323 CCH323 information ccm-manager Call Manager Application information --More--   ccsip CCSIP information ccswvoice ccswvoice information cdapi CDAPI information cdp CDP information ces-conn Connection Manager CES Client Info cgma Cisco Gateway Management Application Information chat Chat scripts activity clns CLNS information cls CLS Information cns CNS subsys debugs compress COMPRESS traffic condition Condition confmodem Modem configuration database conn Connection Manager information cops COPS crm Carrier Resource Manager info ctunnel Generic CTunnel Interface custom-queue Custom output queueing dampening Dampening decnet DECnet information dhcp DHCP client activity dialer Dial on Demand dialpeer Dialpeer info --More--   diffserv DiffServ COPS Client dlsw Data Link Switching (DLSw) events dnsix Dnsix information domain Domain Name System drip DRiP debug information dspapi Generic DSP API dspu DSPU Information dxi atm-dxi information eigrp EIGRP Protocol information entry Incoming queue entries ephone ethernet phone skinny protocol ethernet-interface Ethernet network interface events fastethernet Fast Ethernet interface information fax Fax frame-relay Frame Relay fras FRAS Debug fras-host FRAS Host Debug gssapi GSSAPI debugs h225 H.225 Library Debugging h245 H.245 Library Debugging hpi HPI (54x) DSP messages http HTTP Debugging interface interface --More--   ip IP information ipv6 IPv6 information ipx Novell/IPX information isis IS-IS Information kerberos KERBEROS authentication and authorization l2cac Enable/Disable l2cac debug messages lapb LAPB protocol transactions ldap LDAP debug commands list Set interface or/and access list for the next debug command llc2 LLC2 type II Information lnm Lan Network Manager information lnx generic qllc/llc2 conversion activity local-ack Local ACKnowledgement information mgcp Media Gateway Control Protocol modem Modem control/process activation mop DECnet MOP server events mpls MPLS debug mwi mwi debug information nbf NetBIOS information ncia Native Client Interface Architecture (NCIA) events netbios-name-cache NetBIOS name cache tracing nhrp NHRP protocol --More--   ntp NTP information nvram Debug NVRAM behavior packet Log unknown packets pad X25 PAD protocol ppp PPP (Point to Point Protocol) information pppatm PPP over ATM pppoe PPPoE information printer LPD printer protocol priority Priority output queueing qllc qllc debug information radius RADIUS protocol rapi Debug Role API ras H.323 RAS Library rif RIF cache transactions rpms-proc RPMS Process Information rscmon Resource Monitor rtpspi RTP Service Provider Interface. rtr SAA debug rudpv1 RUDP,V1 information saa SAA debug options scp SCP debugging sdlc SDLC information sdllc SDLLC media translation --More--   R1#deb prip ? % Unrecognized command R1#deb prip   o R1#deb priority ? R1#deb priority Priority output queueing debugging is on R1# RACK18AS>5 [Resuming connection 5 to r5 ... ] S5#180.40.7.162 Trying 180.40.7.162 ... Open R2# RACK18AS>3 1 [Resuming connection 1 to r1 ... ] *Mar R1#sh *Mar 1 17:35:13.275: PQ: Serial0/0 output (Pk size/Q 13/0) R1#sh log Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 99 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 67 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 40 message lines logged --More--   Log Buffer (4096 bytes): *Mar 1 16:19:52.408: %SYS-5-CONFIG_I: Configured from console by console *Mar 1 16:25:58.364: IP: s=180.40.7.161 (local), d=224.0.0.5 (Serial0/0.2), len 80, sending broad/multicast *Mar 1 16:25:58.809: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:25:58.989: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast *Mar 1 16:26:04.382: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast *Mar 1 16:26:06.113: IP: s=180.40.7.130 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:26:06.746: IP: s=180.40.7.129 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:26:08.806: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:26:08.990: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast *Mar 1 16:26:10.080: IP: s=180.40.7.65 (local), d=224.0.0.5 (Serial0/0.1), len 80, sending broad/multicast *Mar 1 16:26:14.411: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast --More--  *Mar 1 16:36:04.626: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast *Mar 1 16:36:06.125: IP: s=180.40.7.130 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:36:06.754: IP: s=180.40.7.129 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:36:08.785: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:36:09.474: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast *Mar 1 16:36:10.211: IP: s=180.40.7.65 (local), d=224.0.0.5 (Serial0/0.1), len 80, sending broad/multicast *Mar 1 16:36:14.635: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast *Mar 1 16:36:16.093: IP: s=180.40.7.130 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:36:16.754: IP: s=180.40.7.129 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:36:18.781: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:36:19.475: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast *Mar 1 17:29:39.132: %SYS-5-CONFIG_I: Configured from console by console --More--  *Mar 1 17:34:17.708: %SYS-5-CONFIG_I: Configured from console by console *Mar 1 17:34:53.275: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:34:59.132: PQ: Serial0/0 output (Pk size/Q 84/0) *Mar 1 17:35:03.275: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:35:08.920: PQ: Serial0/0: ip (tcp 23) -> high *Mar 1 17:35:08.920: PQ: Serial0/0 output (Pk size/Q 48/0) *Mar 1 17:35:08.952: PQ: Serial0/0: ip (tcp 23) -> high *Mar 1 17:35:08.956: PQ: Serial0/0 output (Pk size/Q 44/0) *Mar 1 17:35:08.984: PQ: Serial0/0: ip (tcp 23) -> high *Mar 1 17:35:08.988: PQ: Serial0/0 output (Pk size/Q 53/0) *Mar 1 17:35:10.751: PQ: Serial0/0 output (Pk size/Q 84/0) *Mar 1 17:35:13.275: PQ: Serial0/0 output (Pk size/Q 13/0) R1# *Mar 1 17:35:23.276: PQ: Serial0/0 output (Pk size/Q 13/0) R1# *Mar 1 17:35:29.081: PQ: Serial0/0 output (Pk size/Q 84/0) R1#         *Mar 1 17:35:33.276: PQ: Serial0/0 output (Pk size/Q 13/0) R1# RACK18AS>5 [Resuming connection 5 to r5 ... ] R2#q [Connection to 180.40.7.162 closed by foreign host] S5#telnet    et 180.40.7.162 80 Trying 180.40.7.162, 80 ... % Connection refused by remote host S5# RACK18AS>1 [Resuming connection 1 to r1 ... ] *Mar R1#sh log Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 109 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 77 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 40 message lines logged --More--   Log Buffer (4096 bytes): *Mar 1 16:19:52.408: %SYS-5-CONFIG_I: Configured from console by console *Mar 1 16:25:58.364: IP: s=180.40.7.161 (local), d=224.0.0.5 (Serial0/0.2), len 80, sending broad/multicast *Mar 1 16:25:58.809: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:25:58.989: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast *Mar 1 16:26:04.382: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast *Mar 1 16:26:06.113: IP: s=180.40.7.130 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:26:06.746: IP: s=180.40.7.129 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:26:08.806: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:26:08.990: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad *Mar 1 17:35:59.131: PQ: Serial0/0 output (Pk size/Q 84/0)/multicast *Mar 1 16:26:10.080: IP: s=180.40.7.65 (local), d=224.0.0.5 (Serial0/0.1), len 80, sending broad/multicast *Mar 1 16:26:14.411: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast --More--  *Mar 1 16:36:04.626: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast *Mar 1 16:36:06.125: IP: s=180.40.7.130 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:36:06.754: IP: s=180.40.7.129 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:36:08.785: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:36:09.474: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast *Mar 1 16:36:10.211: IP: s=180.40.7.65 (local), d=224.0.0.5 (Serial0/0.1), len 80, sending broad/multicast *Mar 1 16:36:14.635: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast *Mar 1 16:36:16.093: IP: s=180.40.7.130 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:36:16.754: IP: s=180.40.7.129 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:36:18.781: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:36:19.475: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast *Mar 1 17:29:39.132: %SYS-5-CONFIG_I: Configured from console by console --More--  *Mar 1 17:34:17.708: %SYS-5-CONFIG_I: Configured from console by console *Mar 1 17:34:53.275: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:34:59.132: PQ: Serial0/0 output (Pk size/Q 84/0) *Mar 1 17:35:03.275: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:35:08.920: PQ: Serial0/0: ip (tcp 23) -> high *Mar 1 17:35:08.920: PQ: Serial0/0 output (Pk size/Q 48/0) *Mar 1 17:35:08.952: PQ: Serial0/0: ip (tcp 23) -> high *Mar 1 17:35:08.956: PQ: Serial0/0 output (Pk size/Q 44/0) *Mar 1 17:35:08.984: PQ: Serial0/0: ip (tcp 23) -> high *Mar 1 17:35:08.988: PQ: Serial0/0 output (Pk size/Q 53/0) *Mar 1 17:35:10.751: PQ: Serial0/0 output (Pk size/Q 84/0) *Mar 1 17:35:13.275: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:35:23.276: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:35:29.081: PQ: Serial0/0 output (Pk size/Q 84/0) *Mar 1 17:35:33.276: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:35:38.597: PQ: Serial0/0: cdp (defaulting) -> normal *Mar 1 17:35:38.597: PQ: Serial0/0 output (Pk size/Q 338/2) *Mar 1 17:35:38.597: PQ: Serial0/0: cdp (defaulting) -> normal *Mar 1 17:35:38.597: PQ: Serial0/0 output (Pk size/Q 338/2) *Mar 1 17:35:40.801: PQ: Serial0/0 output (Pk size/Q 84/0) *Mar 1 17:35:43.277: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:35:53.277: PQ: Serial0/0 output (Pk size/Q 13/0) R1# *Mar 1 17:36:03.277: PQ: Serial0/0 output (Pk size/Q 13/0) R1# *Mar 1 17:36:10.758: PQ: Serial0/0 output (Pk size/Q 84/0) R1# *Mar 1 17:36:13.278: PQ: Serial0/0 output (Pk size/Q 13/0) R1#              *Mar 1 17:36:23.278: PQ: Serial0/0 output (Pk size/Q 13/0) R1# *Mar 1 17:36:29.088: PQ: Serial0/0 output (Pk size/Q 84/0) R1# *Mar 1 17:36:33.279: PQ: Serial0/0 output (Pk size/Q 13/0) R1# RACK18AS>5 [Resuming connection 5 to r5 ... ] S5#telnet 180.40.7.162 80 Trying 180.40.7.162, 80 ... % Connection refused by remote host S5# RACK18AS>1 [Resuming connection 1 to r1 ... ] *Ma R1# sh log *Mar 1 17:36:53.279: PQ: Serial0/0 output (Pk size/Q 13/0) R1#sh log Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 123 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 91 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 40 message lines logged --More--   Log Buffer (4096 bytes): rcvd 0 *Mar 1 16:25:58.989: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast *Mar 1 16:26:04.382: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast *Mar 1 16:26:06.113: IP: s=180.40.7.130 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:26:06.746: IP: s=180.40.7.129 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:26:08.806: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:26:08.990: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast *Mar 1 16:26:10.080: IP: s=180.40.7.65 (local), d=224.0.0.5 (Serial0/0.1), len 80, sending broad/multicast *Mar 1 16:26:14.411: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast *Mar 1 16:36:04.626: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast *Mar 1 16:36:06.125: IP: s=180.40.7.130 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 --More--  *Mar 1 16:36:06.754: IP: s=180.40.7.129 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:36:08.785: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:36:09.474: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast *Mar 1 16:36:10.211: IP: s=180.40.7.65 (local), d=224.0.0.5 (Serial0/0.1), len 80, sending broad/multicast *Mar 1 16:36:14.635: IP: s=208.28.1.1 (local), d=224.0.0.5 (Ethernet0/0), len 80, sending broad/multicast *Mar 1 16:36:16.093: IP: s=180.40.7.130 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:36:16.754: IP: s=180.40.7.129 (Ethernet0/1), d=224.0.0.5, len 84, rcvd 0 *Mar 1 16:36:18.781: IP: s=208.28.1.2 (Ethernet0/0), d=224.0.0.5, len 68, rcvd 0 *Mar 1 16:36:19.475: IP: s=180.40.7.131 (local), d=224.0.0.5 (Ethernet0/1), len 84, sending broad/multicast *Mar 1 17:29:39.132: %SYS-5-CONFIG_I: Configured from console by console *Mar 1 17:34:17.708: %SYS-5-CONFIG_I: Configured from console by console *Mar 1 17:34:53.275: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:34:59.132: PQ: Serial0/0 output (Pk size/Q 84/0) *Mar 1 17:35:03.275: PQ: Serial0/0 output (Pk size/Q 13/0) --More--  *Mar 1 17:35:08.920: PQ: Serial0/0: ip (tcp 23) -> high *Mar 1 17:35:08.920: PQ: Serial0/0 output (Pk size/Q 48/0) *Mar 1 17:35:08.952: PQ: Serial0/0: ip (tcp 23) -> high *Mar 1 17:35:08.956: PQ: Serial0/0 output (Pk size/Q 44/0) *Mar 1 17:35:08.984: PQ: Serial0/0: ip (tcp 23) -> high *Mar 1 17:35:08.988: PQ: Serial0/0 output (Pk size/Q 53/0) *Mar 1 17:35:10.751: PQ: Serial0/0 output (Pk size/Q 84/0) *Mar 1 17:35:13.275: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:35:23.276: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:35:29.081: PQ: Serial0/0 output (Pk size/Q 84/0) *Mar 1 17:35:33.276: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:35:38.597: PQ: Serial0/0: cdp (defaulting) -> normal *Mar 1 17:35:38.597: PQ: Serial0/0 output (Pk size/Q 338/2) *Mar 1 17:35:38.597: PQ: Serial0/0: cdp (defaulting) -> normal *Mar 1 17:35:38.597: PQ: Serial0/0 output (Pk size/Q 338/2) *Mar 1 17:35:40.801: PQ: Serial0/0 output (Pk size/Q 84/0) *Mar 1 17:35:43.277: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:35:53.277: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:35:59.131: PQ: Serial0/0 output (Pk size/Q 84/0) *Mar 1 17:36:03.277: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:36:10.758: PQ: Serial0/0 output (Pk size/Q 84/0) *Mar 1 17:36:13.278: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:36:23.278: PQ: Serial0/0 output (Pk size/Q 13/0) --More--  *Mar 1 17:36:29.088: PQ: Serial0/0 output (Pk size/Q 84/0) *Mar 1 17:36:33.279: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:36:38.603: PQ: Serial0/0: cdp (defaulting) -> normal *Mar 1 17:36:38.603: PQ: Serial0/0 output (Pk size/Q 338/2) *Mar 1 17:36:38.603: PQ: Serial0/0: cdp (defaulting) -> normal *Mar 1 17:36:38.603: PQ: Serial0/0 output (Pk size/Q 338/2) *Mar 1 17:36:40.807: PQ: Serial0/0 output (Pk size/Q 84/0) *Mar 1 17:36:43.279: PQ: Serial0/0 output (Pk size/Q 13/0) *Mar 1 17:36:53.279: PQ: Serial0/0 output (Pk size/Q 13/0) R1# *Mar 1 17:36:59.137: PQ: Serial0/0 output (Pk size/Q 84/0) R1# *Mar 1 17:37:03.280: PQ: Serial0/0 output (Pk size/Q 13/0) R1# *Mar 1 17:37:10.756: PQ: Serial0/0 output (Pk size/Q 84/0) R1# *Mar 1 17:37:13.280: PQ: Serial0/0 output (Pk size/Q 13/0) R1# *Mar 1 17:37:23.281: PQ: Serial0/0 output (Pk size/Q 13/0) R1# u all All possible debugging has been turned off R1#int s     config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int s 0/0 R1(config-if)#int s 0/0priority-group 1 npriority-group 1 opriority-group 1  priority-group 1  R1(config-if)#int s 0. /0.2 R1(config-subif)# R1(config-subif)# R1(config-subif)# R1(config-subif)# R1(config-subif)# R1(config-subif)# R1(config-subif)#do sh run int s 0/0.2 Building configuration... Current configuration : 172 bytes ! interface Serial0/0.2 point-to-point bandwidth 128 ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 102 end R1(config-subif)#frame-relay interface-dlci 102 %PVC is already defined R1(config-fr-dlci)#? Frame Relay dlci configuration commands: auto Configure Automation class Assign a mapclass to a dlci default Set a command to its defaults exit Exit from FR dlci configuration mode load-interval Specify interval for load calculation for a dlci no Negate a command or set its defaults vofr Voice over Frame-Relay R1(config-fr-dlci)#frame-relay interface-dlci 102                              exit R1(config-subif)#fram R1(config-subif)#frame-relay int R1(config-subif)#frame-relay interface-dlci 102 ? cisco Use CISCO Encapsulation ietf Use RFC1490/RFC2427 Encapsulation ppp Use RFC1973 Encapsulation to support PPP over FR protocol Optional protocol information for remote end R1(config-subif)#frame-relay interface-dlci 102 pro R1(config-subif)#frame-relay interface-dlci 102 protocol ? A.B.C.D Protocol specific address ip IP R1(config-subif)#frame-relay interface-dlci 102 protocol ip ? A.B.C.D Protocol specific address R1(config-subif)#frame-relay interface-dlci 102 protocol ip                                ? class Define a map class on the interface de-group Associate a DE group with a DLCI interface-dlci Define a DLCI on an interface/subinterface inverse-arp Enable/disable FR inverse ARP ip Frame Relay Internet Protocol config commands map Map a protocol address to a DLCI address payload-compression Use payload compression priority-dlci-group Define a priority group of DLCIs R1(config-subif)#frame-relay pri R1(config-subif)#frame-relay priority-dlci-group ? <1-16> Assign priority group R1(config-subif)#frame-relay priority-dlci-group 1 ? <16-1007> DLCI for high priority R1(config-subif)#frame-relay priority-dlci-group 1  1    ? <16-1007> DLCI for high priority R1(config-subif)#frame-relay priority-dlci-group 1 102 ? <16-1007> DLCI for medium priority R1(config-subif)#frame-relay priority-dlci-group 1 102 102 ? <16-1007> DLCI for normal priority R1(config-subif)#frame-relay priority-dlci-group 1 102 102 102 102 R1(config-subif)# *Mar 1 17:40:11.961: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial0/0.2 from FULL to DOWN, Neighbor Down: Interface down or detached R1(config-subif)# *Mar 1 17:40:25.996: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial0/0.2 from LOADING to FULL, Loading Done R1(config-subif)#^Z R1#sh run | *Mar 1 17:40:36.774: %SYS-5-CONFIG_I: Configured from console by console R1#sh run | b interface Serial1 0/0.  interface Serial0/0 bandwidth 128 no ip address encapsulation frame-relay ! interface Serial0/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 103 ! interface Serial0/0.2 point-to-point bandwidth 128 ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 102 102 102 102 frame-relay interface-dlci 102 ! interface Ethernet0/1 ip address 180.40.7.131 255.255.255.224 service-policy output Prob6 half-duplex ! interface Serial0/1 --More--   no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server ip classless ! ! ! access-list 100 permit tcp host 208.28.1.2 any eq telnet access-list 101 permit ip host 208.28.1.2 any priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! call rsvp-sync ! ! mgcp profile default ! --More--   R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#it   nt s 1 0/0.2 R1(config-subif)#int s 0/0.2frame-relay priority-dlci-group 1 102 102 102 102nframe-relay priority-dlci-group 1 102 102 102 102oframe-relay priority-dlci-group 1 102 102 102 102 frame-relay priority-dlci-group 1 102 102 102 102 R1(config-subif)#exit *Mar 1 17:41:40.186: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial0/0.2 from FULL to DOWN, Neighbor Down: Interface down or detached R1(config-subif)#exit R1(config)#fram m      map-clas fram Prob7b R1(config-map-class)#fra   >? % Unrecognized command R1(config-map-class)#> ? Static maps class configuration commands: default Set a command to its defaults exit-class Exit from static map class configuration mode frame-relay Configure Map parameters help Description of the interactive help system no Negate a command or set its defaults service-policy class-based service policy R1(config-map-class)#fram >? % Unrecognized command R1(config-map-class)#fram > ? adaptive-shaping Adaptive traffic rate adjustment, Default = none bc Committed burst size (Bc), Default = 56000 bits be Excess burst size (Be), Default = 0 bits cir Committed Information Rate (CIR), Default = 56000 bps congestion Congestion management parameters custom-queue-list VC custom queueing end-to-end Configure frame-relay end-to-end VC parameters fair-queue VC fair queueing fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fragment fragmentation - Requires Frame Relay traffic-shaping to be configured at the interface level holdq Hold queue size for VC idle-timer Idle timeout for a SVC, Default = 120 sec interface-queue PVC interface queue parameters ip Assign a priority queue for RTP streams mincir Minimum acceptable CIR, Default = CIR/2 bps priority-group VC priority queueing tc Policing Measurement Interval (Tc) traffic-rate VC traffic rate voice voice options R1(config-map-class)#fram proi R1(config-map-class)#fram proi`  R1(config-map-class)#fram proi  i R1(config-map-class)#fram priority-group ? <1-16> Priority group number R1(config-map-class)#fram priority-group 1 ? R1(config-map-class)#fram priority-group 1   R1(config-map-class)#int s 1/0.2 ^ % Invalid input detected at '^' marker. R1(config)#int s 1/0.2 *Mar 1 17:42:25.796: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial0/0.2 from LOADING to FULL, Loading Done R1(config)#int s 1/0.2/0.2 0/0.2 R1(config-subif)#fram int   R1(config-subif)#fram interface-dlci 102 %PVC is already defined R1(config-fr-dlci)#? Frame Relay dlci configuration commands: auto Configure Automation class Assign a mapclass to a dlci default Set a command to its defaults exit Exit from FR dlci configuration mode load-interval Specify interval for load calculation for a dlci no Negate a command or set its defaults vofr Voice over Frame-Relay R1(config-fr-dlci)#clas ? WORD map class name R1(config-fr-dlci)#clas Prob7b ? R1(config-fr-dlci)#clas Prob7b   R1(config-fr-dlci)#^Z R1# *Mar 1 17:42:48.486: %SYS-5-CONFIG_I: Configured from console by console R1#sh run config tsh run | b interface Serial0/0 interface Serial0/0 bandwidth 128 no ip address encapsulation frame-relay ! interface Serial0/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 103 ! interface Serial0/0.2 point-to-point bandwidth 128 ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 102 class Prob7b ! interface Ethernet0/1 ip address 180.40.7.131 255.255.255.224 service-policy output Prob6 half-duplex ! interface Serial0/1 --More--   no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server ip classless ! ! ! ! map-class frame-relay Prob7b frame-relay priority-group 1 access-list 100 permit tcp host 208.28.1.2 any eq telnet access-list 101 permit ip host 208.28.1.2 any priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! call rsvp-sync ! --More--   R1# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#qu R3(config)#queue-list ? <1-16> Queue list number R3(config)#queue-list 1 ? default Set custom queue for unspecified datagrams interface Establish priorities for packets from a named interface lowest-custom Set lowest number of queue to be treated as custom protocol priority queueing by protocol queue Configure parameters for a particular queue stun Establish priorities for stun packets R3(config)#queue-list 1 pro R3(config)#queue-list 1 protocol ? aarp AppleTalk ARP appletalk AppleTalk arp IP ARP bridge Bridging bstun Block Serial Tunnel cdp Cisco Discovery Protocol clns ISO CLNS clns_es ISO CLNS End System clns_is ISO CLNS Intermediate System cmns ISO CMNS compressedtcp Compressed TCP decnet DECnet decnet_node DECnet Node decnet_router-l1 DECnet Router L1 decnet_router-l2 DECnet Router L2 dlsw Data Link Switching ip IP ipv6 IPV6 ipx Novell IPX llc2 llc2 pad PAD links pppoe PPP over Ethernet --More--   R3(config)#queue-list 1 protocol t ip ? <0-16> queue number R3(config)#queue-list 1 protocol ip 1 ? fragments Prioritize fragmented IP packets gt Classify packets greater than a specified size list To specify an access list lt Classify packets less than a specified size tcp Prioritize TCP packets 'to' or 'from' the specified port udp Prioritize UDP packets 'to' or 'from' the specified port R3(config)#queue-list 1 protocol ip 1 tcp ? <0-65535> Port number bgp Border Gateway Protocol (179) chargen Character generator (19) cmd Remote commands (rcmd, 514) daytime Daytime (13) discard Discard (9) domain Domain Name Service (53) echo Echo (7) exec Exec (rsh, 512) finger Finger (79) ftp File Transfer Protocol (21) ftp-data FTP data connections (20) gopher Gopher (70) hostname NIC hostname server (101) ident Ident Protocol (113) irc Internet Relay Chat (194) klogin Kerberos login (543) kshell Kerberos shell (544) login Login (rlogin, 513) lpd Printer service (515) nntp Network News Transport Protocol (119) pim-auto-rp PIM Auto-RP (496) --More--   R3(config)#queue-list 1 protocol ip 1 tcp tp    ftp ? R3(config)#queue-list 1 protocol ip 1 tcp ftp R3(config)#queue-list 1 protocol ip 1 tcp ftp           2 tcp telnet R3(config)#queue-list 1 protocol ip 2 tcp telnet                        def R3(config)#queue-list 1 default 3 R3(config)#que R3(config)#queue-list 1 ? default Set custom queue for unspecified datagrams interface Establish priorities for packets from a named interface lowest-custom Set lowest number of queue to be treated as custom protocol priority queueing by protocol queue Configure parameters for a particular queue stun Establish priorities for stun packets R3(config)#queue-list 1 queue ? <0-16> queue number R3(config)#queue-list 1 queue 1 ? byte-count Specify size in bytes of a particular queue limit Set queue entry limit of a particular queue R3(config)#queue-list 1 queue 1 by R3(config)#queue-list 1 queue 1 byte-count ? <1-16777215> size in bytes R3(config)#queue-list 1 queue 1 byte-count 17820 R3(config)#queue-list 1 queue 1 byte-count 17820     8918 byte-count 8918 2 byte-count 8918 R3(config)#queue-list 1 queue 2 byte-count 8918    9058 byte-count 9058 3 byte-count 9058 R3(config)#int s 1/2 R3(config-if)#qu R3(config-if)#qu  cu R3(config-if)#custom-queue-list 1 ? R3(config-if)#custom-queue-list 1 R3(config-if)#exit R3(config)#exitcustom-queue-list 1 int s 1/2 queue-list 1 queue 3 byte-count 90582 byte-count 89181 byte-count 17820default 3 protocol ip 2 tcp telnet1 tcp ftp  -d R3(config)#queue-list 1 protocol ip 1 tcp ftp-data R3(config)#^Z R3# *Mar 1 17:55:29.713: %SYS-5-CONFIG_I: Configured from console by console R3#sh run | b interface Serial1/2 interface Serial1/2 ip address 180.40.7.1 255.255.255.224 custom-queue-list 1 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown --More--  ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server no ip http secure-server ip classless ! ! ! access-list 100 permit icmp host 100.1.1.1 host 20.10.1.2 echo access-list 101 permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo access-list 102 permit icmp host 100.1.1.1 host 20.10.1.1 echo access-list 103 permit ip host 192.10.32.18 20.10.1.0 0.0.0.255 queue-list 1 protocol ip 1 tcp ftp queue-list 1 protocol ip 2 tcp telnet queue-list 1 protocol ip 1 tcp ftp-data queue-list 1 default 3 queue-list 1 queue 1 byte-count 17820 queue-list 1 queue 2 byte-count 8918 queue-list 1 queue 3 byte-count 9058 ! --More--   R3# RACK18AS>1 [Resuming connection 1 to r1 ... ] R1#confi gtconfig t                config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int stat n R1(config)#int stand R1(config)#int stand     e 0/1 R1(config-if)#stand R1(config-if)#standby ? <0-255> group number authentication Authentication delay HSRP initialisation delay ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level redirects Configure sending of ICMP Redirect messages with an HSRP virtual IP address as the gateway IP address timers Hello and hold timers track Priority tracking use-bia HSRP uses interface's burned in address R1(config-if)#standby 1 ip ? A.B.C.D Virtual IP address R1(config-if)#standby 1 ip 180.40.7.3 132 ? secondary Make this IP address a secondary virtual IP address R1(config-if)#standby 1 ip 180.40.7.132 R1(config-if)# *Mar 1 18:52:52.293: %HSRP-6-STATECHANGE: Ethernet0/1 Grp 1 state Standby -> Active R1(config-if)#stand R1(config-if)#standby 1 pre R1(config-if)#standby 1 preempt R1(config-if)#^Z R1# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#confi Configuring from terminal, memory, or network [terminal]? Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#standy 1 ip 180.40.7.132 ^ % Invalid input detected at '^' marker. R3(config-if)#standy 1 ip 180.40.7.132by 1 ip 180.40.7.132 R3(config-if)#stand R3(config-if)#standby 1 pre R3(config-if)#standby 1 preempt R3(config-if)#stan R3(config-if)#standby 1 pri R3(config-if)#standby 1 priority 1509  R3(config-if)# R3(config-if)# R3(config-if)# R3(config-if)# *Mar 1 18:52:53.431: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 1 state Speak -> Active R3(config-if)# R3(config-if)# R3(config-if)# R3(config-if)# RACK18AS>1 [Resuming connection 1 to r1 ... ] *Mar R1#sh stan R1#sh standby Ethernet0/1 - Group 1 State is Standby 4 state changes, last state change 00:00:09 Virtual IP address is 180.40.7.132 Active virtual MAC address is 0000.0c07.ac01 Local virtual MAC address is 0000.0c07.ac01 (default) Hello time 3 sec, hold time 10 sec Next hello sent in 2.776 secs Preemption enabled Active router is 180.40.7.129, priority 150 (expires in 8.770 sec) Standby router is local Priority 100 (default 100) IP redundancy name is "hsrp-Et0/1-1" (default) R1# R1# R1# R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int e 0/1 R1(config-if)#stan R1(config-if)#standby 1 ? authentication Authentication ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level timers Hello and hold timers track Priority tracking R1(config-if)#standby 1 ma R1(config-if)#standby 1 mac-address ? H.H.H MAC address R1(config-if)#standby 1 mac-address                       ^Z R1# *Mar 1 18:56:08.318: %SYS-5-CONFIG_I: Configured from console by console R1# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3(config-if)#stand R3(config-if)#standby 1 tr R3(config-if)#standby 1 track s 1/2 ? <1-255> Decrement value R3(config-if)#standby 1 track s 1/2 51 R3(config-if)#standby 1 track s 1/2 51 51 0 51 R3(config-if)#exit R3(config)#track R3(config)#track ? <1-500> Tracked object resolution Tracking resolution parameters timer Polling interval timers R3(config)#track 1 ? interface Select an interface to track ip IP protocol R3(config)#track 1 ip ? route IP route R3(config)#track 1 ip route ? A.B.C.D {/nn || A.B.C.D} Prefix and mask R3(config)#track 1 ip route 208 .10.1.0/24 ? metric Route metric reachability Route reachability state R3(config)#track 1 ip route 20.10.1.0/24 re R3(config)#track 1 ip route 20.10.1.0/24 reachability ? R3(config)#track 1 ip route 20.10.1.0/24 reachability % Cannot change object created via HSRP R3(config)#do sh run \ sh run \ ^ % Invalid input detected at '^' marker. R3(config)#do sh run \  Building configuration... Current configuration : 2632 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! logging queue-limit 100 logging buffered 4096 debugging ! ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 ! ! mpls ldp logging neighbor-changes --More--  ! --More--  ! --More--  ! --More--  ! --More--  ! --More--  ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip route-cache policy ip policy route-map Prob1 duplex auto speed auto standby 1 ip 180.40.7.132 --More--   standby 1 priority 150 standby 1 preempt standby 1 track Serial1/2 51 standby 1 track Serial1/0 51 ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network point-to-multipoint frame-relay map ip 180.40.7.65 301 broadcast frame-relay map ip 180.40.7.67 302 broadcast ! interface Serial1/1 --More--   R3(config)#int s 1/0 R3(config-if)#int s 1/0 1/0 f 1/0 1/0 0/0 R3(config-if)#no stand R3(config-if)#no standby 1 ip R3(config-if)#no standby 1 ip *Mar 1 18:57:34.840: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 1 state Active -> Disabled R3(config-if)#no standby 1 ip int f 0/0 s 1/0do sh run \track 1 ip route 20.10.1.0/24 reachability % Cannot change object created via HSRP R3(config)#track 1 ip route 20.10.1.0/24 reachability  int fa 0/0 R3(config-if)#dos h run int do s h run int ss h run int h run int fa 0/0 Building configuration... Current configuration : 252 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip route-cache policy ip policy route-map Prob1 duplex auto speed auto standby 1 priority 150 standby 1 preempt standby 1 track Serial1/2 51 standby 1 track Serial1/0 51 end R3(config-if)#no standby 1 priority 150 R3(config-if)#no standby 1 preempt R3(config-if)#no standby 1 track Serial1/2 51 R3(config-if)#no standby 1 track Serial1/0 51 R3(config-if)#no standby 1 track Serial1/0 512 51preempt iority 150do sh run int fa 0/0 int fa 0/0 track 1 ip route 20.10.1.0/24 reachability R3(config-track)#? Tracking instance configuration commands: default Set a command to its defaults delay Tracking delay exit Exit from tracking configuration mode ip Tracking IP configuration subcommands no Negate a command or set its defaults R3(config-track)#exit R3(config)#int fa 0/0 R3(config-if)#int fa 0/0exit track 1 ip route 20.10.1.0/24 reachability no standby 1 track Serial1/0 51 2 51preempt iority 150do sh run int fa 0/0 int fa 0/0 track 1 ip route 20.10.1.0/24 reachability no standby 1 ip int f 0/0 s 1/0do sh run \track 1 ip route 20.10.1.0/24 reachability exit standby 1 track s 1/0 512 51priority 150  R3(config-if)#standby 1 priority 150int fa 0/0 exit track 1 ip route 20.10.1.0/24 reachability no standby 1 track Serial1/0 51 no standby 1 track Serial1/0 51  standby 1 track Serial1/0 51  R3(config-if)# standby 1 track Serial1/0 51standby 1 priority 150 int fa 0/0 standby 1 priority 150 standby 1 track Serial1/0 51 51 2 51 R3(config-if)#standy 1 track ? % Unrecognized command R3(config-if)#standy 1 track           by 1 tra R3(config-if)#standby 1 track ? <1-500> Tracked object number Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-FrameRelay Virtual Frame Relay interface Virtual-TokenRing Virtual TokenRing R3(config-if)#standby 1 track 1 ? decrement Priority decrement R3(config-if)#standby 1 track 1 dec 51 R3(config-if)#stan R3(config-if)#standby 1 ip 180.409 .7.132 R3(config-if)#stand R3(config-if)#standby 1 pri 150 R3(config-if)#stand R3(config-if)#standby 1 pe ree R3(config-if)#^Z R3#sh run *Mar 1 18:59:45.234: %SYS-5-CONFIG_I: Configured from console by console R3#sh run int *Mar 1 18:59:46.896: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 1 state Speak -> Active R3#sh run int fa 0/0 Building configuration... Current configuration : 311 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip route-cache policy ip policy route-map Prob1 duplex auto speed auto standby 1 ip 180.40.7.132 standby 1 priority 150 standby 1 preempt standby 1 track 1 decrement 51 standby 1 track Serial1/0 51 standby 1 track Serial1/2 51 end R3# R3# R3# R3# R3#o config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#in  standby 1 preei 150ip 180.40.7.132track 1 dec 51  standby 1 track Serial1/2 510 51standby 1 priority 150 int fa 0/0 exit track 1 ip route 20.10.1.0/24 reachability R3(config-track)#? Tracking instance configuration commands: default Set a command to its defaults delay Tracking delay exit Exit from tracking configuration mode ip Tracking IP configuration subcommands no Negate a command or set its defaults R3(config-track)#ip ? vrf Configure VPN Routing/Forwarding table R3(config-track)#ip    ^Z R3# *Mar 1 19:00:56.162: %SYS-5-CONFIG_I: Configured from console by console R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#no track 1 ip route 20.10.1.0/24 reachability mtrack 1 ip route 20.10.1.0/24 reachability ntrack 1 ip route 20.10.1.0/24 reachability track 1 ip route 20.10.1.0/24 reachability track 1 ip route 20.10.1.0/24 reachability ntrack 1 ip route 20.10.1.0/24 reachability otrack 1 ip route 20.10.1.0/24 reachability  track 1 ip route 20.10.1.0/24 reachability  R3(config)#do sh run |   int no track 1 ip route 20.10.1.0/24 reachability track 1 ip route 20.10.1.0/24 reachability ? R3(config)#track 1 ip route 20.10.1.0/24 reachability R3(config-track)#? Tracking instance configuration commands: default Set a command to its defaults delay Tracking delay exit Exit from tracking configuration mode ip Tracking IP configuration subcommands no Negate a command or set its defaults R3(config-track)#def R3(config-track)#default ? delay Tracking delay ip Tracking IP configuration subcommands R3(config-track)#default ip ? vrf Configure VPN Routing/Forwarding table R3(config-track)#default ip            exit R3(config)#exittrack 1 ip route 20.10.1.0/24 reachability              ? metric Route metric reachability Route reachability state R3(config)#track 1 ip route 20.10.1.0/24 met R3(config)#track 1 ip route 20.10.1.0/24 metric ? threshold Route metric threshold R3(config)#track 1 ip route 20.10.1.0/24 metric th R3(config)#track 1 ip route 20.10.1.0/24 metric threshold ? R3(config)#track 1 ip route 20.10.1.0/24 metric threshold R3(config-track)#? Tracking instance configuration commands: default Set a command to its defaults delay Tracking delay exit Exit from tracking configuration mode ip Tracking IP configuration subcommands no Negate a command or set its defaults threshold Threshold parameters R3(config-track)#th R3(config-track)#threshold ? metric Scaled metric threshold R3(config-track)#threshold me R3(config-track)#threshold metric ? down Down threshold up Up threshold R3(config-track)#threshold metric p   up ? <0-254> Threshold value R3(config-track)#threshold metric up *Mar 1 19:02:58.959: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 1 state Active -> Speak R3(config-track)#threshold metric up                     sh ip       do sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/32 is subnetted, 1 subnets O 100.1.1.1 [110/2] via 180.40.7.130, 01:21:43, FastEthernet0/0 20.0.0.0/24 is subnetted, 1 subnets O 20.10.1.0 [110/782] via 180.40.7.2, 01:21:43, Serial1/2 [110/782] via 180.40.7.67, 01:21:43, Serial1/0 O 208.28.1.0/24 [110/11] via 180.40.7.131, 01:21:43, FastEthernet0/0 192.10.32.0/32 is subnetted, 1 subnets O 192.10.32.18 [110/2] via 180.40.7.130, 01:21:43, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/781] via 180.40.7.2, 01:21:44, Serial1/2 [110/781] via 180.40.7.67, 01:21:44, Serial1/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 01:21:44, FastEthernet0/0 --More--   R3(config-track)#th R3(config-track)#threshold ? metric Scaled metric threshold R3(config-track)#threshold me up ? <0-254> Threshold value R3(config-track)#threshold me up 783 ? % Unrecognized command R3(config-track)#threshold me up 783   ^ % Invalid input detected at '^' marker. R3(config-track)#threshold me up 783   ? <0-254> Threshold value R3(config-track)#threshold me up 1 ? down Down threshold R3(config-track)#threshold me up 1 R3(config-track)# R3# *Mar 1 19:04:05.713: %SYS-5-CONFIG_I: Configured from console by console R3#do shr    run ^ % Invalid input detected at '^' marker. R3#sh run Building configuration... Current configuration : 2747 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! logging queue-limit 100 logging buffered 4096 debugging ! ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 ! track 1 ip route 20.10.1.0 255.255.255.0 metric threshold threshold metric up 1 --More--  ! --More--  ! --More--  mpls ldp logging neighbor-changes --More--  ! --More--   R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#no track 1 ip route 20.10.1.0 255.255.255.0 metric threshold R3(config)#do sh ru *Mar 1 19:10:26.116: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 1 state Standby -> Active R3(config)#do sh run int fa 0/0 Building configuration... Current configuration : 311 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip route-cache policy ip policy route-map Prob1 duplex auto speed auto standby 1 ip 180.40.7.132 standby 1 priority 150 standby 1 preempt standby 1 track 1 decrement 51 standby 1 track Serial1/0 51 standby 1 track Serial1/2 51 end R3(config)#int fa 0/0 R3(config-if)#no standby 1 track 1 decrement 51 R3(config-if)#^Z R3# *Mar 1 19:10:45.704: %SYS-5-CONFIG_I: Configured from console by console R3# RACK18AS>1 [Resuming connection 1 to r1 ... ] *Mar 1 R1#sh run int e 0/0 1 Building configuration... Current configuration : 158 bytes ! interface Ethernet0/1 ip address 180.40.7.131 255.255.255.224 service-policy output Prob6 half-duplex standby 1 ip 180.40.7.132 standby 1 preempt end R1# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh run int fa 0/0 Building configuration... Current configuration : 279 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip route-cache policy ip policy route-map Prob1 duplex auto speed auto standby 1 ip 180.40.7.132 standby 1 priority 150 standby 1 preempt standby 1 track Serial1/0 51 standby 1 track Serial1/2 51 end R3# R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip ? Global IP configuration subcommands: access-list Named access-list accounting-list Select hosts for which IP accounting information is kept accounting-threshold Sets the maximum number of accounting entries accounting-transits Sets the maximum number of transit entries address-pool Specify default IP address pooling mechanism alias Alias an IP address to a TCP port as-path BGP autonomous system path filter audit Intrusion Detection System auth-proxy Authentication Proxy bgp-community format for BGP community bootp Config BOOTP services cef Cisco Express Forwarding classless Follow classless routing forwarding rules community-list Add a community list entry default-gateway Specify default gateway (if not routing IP) default-network Flags networks as candidates for default routes dhcp Configure DHCP server and relay parameters dhcp-client Configure parameters for DHCP client operation dhcp-server Specify address of DHCP server to use dns Configure DNS server for a zone --More--   R3(config)#ip    dh R3(config)#dhcp ? % Unrecognized command R3(config)#dhcp      ip dhcp ? aaa Configure aaa attributes binding DHCP address bindings bootp BOOTP specific configuration conflict DHCP address conflict parameters database Configure DHCP database agents excluded-address Prevent DHCP from assigning certain addresses limited-broadcast-address Use all 1's broadcast address ping Specify ping parameters used by DHCP pool Configure DHCP address pools relay DHCP relay agent parameters smart-relay Enable Smart Relay feature R3(config)#ip dhcp pool ? WORD Pool name R3(config)#ip dhcp pool Prob10 ? R3(config)#ip dhcp pool Prob10               ex R3(config)#ip dhcp excluded-address 180.40.7.129 ? A.B.C.D High IP address R3(config)#ip dhcp excluded-address 180.40.7.129 R3(config)#ip dhcp excluded-address 180.40.7.129    30 R3(config)#ip dhcp excluded-address 180.40.7.13029 no standby 1 track 1 decrement 51 ip dhcp excluded-address 180.40.7.129    32 R3(config)#doshr un         sh run Building configuration... Current configuration : 2746 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! logging queue-limit 100 logging buffered 4096 debugging ! ip subnet-zero ! ! no ip domain lookup ip dhcp excluded-address 180.40.7.129 ip dhcp excluded-address 180.40.7.130 ip dhcp excluded-address 180.40.7.132 ! ip audit notify log ip audit po max-events 100 --More--   R3(config)#do sh runip dhcp excluded-address 180.40.7.132nip dhcp excluded-address 180.40.7.132oip dhcp excluded-address 180.40.7.132 ip dhcp excluded-address 180.40.7.132 R3(config)#no ip dhcp excluded-address 180.40.7.132do sh run ip dhcp excluded-address 180.40.7.1320nip dhcp excluded-address 180.40.7.130oip dhcp excluded-address 180.40.7.130 ip dhcp excluded-address 180.40.7.130 R3(config)#no ip dhcp excluded-address 180.40.7.1302do sh run ip dhcp excluded-address 180.40.7.132029 180.40.7 7.132 R3(config)#di o sh u run Building configuration... Current configuration : 2721 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! logging queue-limit 100 logging buffered 4096 debugging ! ip subnet-zero ! ! no ip domain lookup ip dhcp excluded-address 180.40.7.129 ip dhcp excluded-address 180.40.7.129 180.40.7.132 ! ip audit notify log ip audit po max-events 100 ! --More--   R3(config)#no % Incomplete command. R3(config)#i no ip dhcp excluded-address 180.40.7.129 R3(config)#ip dhcp pool yomomma R3(dhcp-config)#? DHCP pool configuration commands: accounting Send Accounting Start/Stop messages bootfile Boot file name client-identifier Client identifier client-name Client name default-router Default routers dns-server DNS servers domain-name Domain name exit Exit from DHCP pool configuration mode hardware-address Client hardware address host Client IP address and mask import Programatically importing DHCP option parameters lease Address lease time netbios-name-server NetBIOS (WINS) name servers netbios-node-type NetBIOS node type network Network number and mask next-server Next server in boot process no Negate a command or set its defaults option Raw DHCP options origin Configure the origin of the pool subnet Subnet allocation commands update Dynamic updates --More--   utilization Configure various utilization parameters vrf Associate this pool with a VRF R3(dhcp-config)#network ? A.B.C.D Network number in dotted-decimal notation R3(dhcp-config)#network 180.40.7.0 ? /nn or A.B.C.D Network mask or prefix length R3(dhcp-config)#network 180.40.7.0   128/27 ^ % Invalid input detected at '^' marker. R3(dhcp-config)#network 180.40.7.128/27 /27 R3(dhcp-config)#default-router ? Hostname or A.B.C.D Router's name or IP address R3(dhcp-config)#default-router 180.40.7.132 R3(dhcp-config)#dom R3(dhcp-config)#domain-name ? WORD Domain name R3(dhcp-config)#domain-name ccie.com R3(dhcp-config)#dns-server ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#dns-server 208.28.1.82 ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#dns-server 208.28.1.82 R3(dhcp-config)#? DHCP pool configuration commands: accounting Send Accounting Start/Stop messages bootfile Boot file name client-identifier Client identifier client-name Client name default-router Default routers dns-server DNS servers domain-name Domain name exit Exit from DHCP pool configuration mode hardware-address Client hardware address host Client IP address and mask import Programatically importing DHCP option parameters lease Address lease time netbios-name-server NetBIOS (WINS) name servers netbios-node-type NetBIOS node type network Network number and mask next-server Next server in boot process no Negate a command or set its defaults option Raw DHCP options origin Configure the origin of the pool subnet Subnet allocation commands update Dynamic updates --More--   utilization Configure various utilization parameters vrf Associate this pool with a VRF R3(dhcp-config)#option ? <0-254> DHCP option code R3(dhcp-config)#option    RACK18AS> [Resuming connection 3 to r3 ... ] % Incomplete command. R3(dhcp-config)#op R3(dhcp-config)#option ? <0-254> DHCP option code R3(dhcp-config)#option 150 ? ascii Data is an NVT ASCII string hex Data is a hexadecimal string instance Specify the option instance ip Data is one or more IP addresses R3(dhcp-config)#option 150 ip ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#option 150 ip 20.20.20.20 ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#option 150 ip 20.20.20.20 R3(dhcp-config)#option 66 > ? ascii Data is an NVT ASCII string hex Data is a hexadecimal string instance Specify the option instance ip Data is one or more IP addresses R3(dhcp-config)#option 66 ip ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#option 66 ip              ^Z R3#sh run Building configuration... *Mar 1 19:24:21.181: %SYS-5-CONFIG_I: Configured from console by console Current configuration : 2859 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! logging queue-limit 100 logging buffered 4096 debugging ! ip subnet-zero ! ! no ip domain lookup ip dhcp excluded-address 180.40.7.129 180.40.7.132 ! ip dhcp pool yomomma network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 domain-name ccie.com --More--   dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! ip audit notify log ip audit po max-events 100 ! ! mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! --More--   R3# RACK18AS>1 [Resuming connection 1 to r1 ... ] R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#ip dhcp excluded-address 180.40.7.129 180.40.7.132 R1(config)#! R1(config)#ip dhcp pool yomomma R1(dhcp-config)# network 180.40.7.128 255.255.255.224 R1(dhcp-config)# default-router 180.40.7.132 R1(dhcp-config)# domain-name ccie.com R1(dhcp-config)# dns-server 208.28.1.82 R1(dhcp-config)# option 150 ip 20.20.20.20 R1(dhcp-config)#^Z R1# *Mar 1 19:25:58.288: %SYS-5-CONFIG_I: Configured from console by console R1#sh run Building configuration... Current configuration : 2169 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! logging queue-limit 100 logging buffered 4096 debugging ! memory-size iomem 10 ip subnet-zero ! ! no ip domain lookup ip dhcp excluded-address 180.40.7.129 180.40.7.132 ! ip dhcp pool yomomma network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 --More--   domain-name ccie.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! class-map match-all S5Telnet match access-group 100 --More--   R1# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int fa 0/0 R4(config-if)#ip dh R4(config-if)#ip dhcp ? relay DHCP relay configuration parameters R4(config-if)#ip dhcp      ? Interface IP configuration subcommands: access-group Specify access control for packets accounting Enable IP accounting on this interface address Set the IP address of an interface audit Apply IDS audit name auth-proxy Apply authenticaton proxy authentication authentication subcommands bandwidth-percent Set EIGRP bandwidth limit bgp BGP interface commands broadcast-address Set the broadcast address of an interface cef Cisco Express Fowarding interface commands cgmp Enable/disable CGMP dhcp Configure DHCP parameters for this interface directed-broadcast Enable forwarding of directed broadcasts dvmrp DVMRP interface commands flow NetFlow related commands hello-interval Configures IP-EIGRP hello interval helper-address Specify a destination address for UDP broadcasts hold-time Configures IP-EIGRP hold time idle-group Specify interesting packets for idle-timer igmp IGMP interface commands inspect Apply inspect name --More--   R4(config-if)#ip add R4(config-if)#ip address ? A.B.C.D IP address dhcp IP Address negotiated via DHCP pool IP Address autoconfigured from a local DHCP pool R4(config-if)#ip address dhcp ? client-id Specify client-id to use hostname Specify value for hostname option R4(config-if)#ip address dhcp R4(config-if)# *Mar 1 19:28:27.983: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from 2WAY to DOWN, Neighbor Down: Interface down or detached *Mar 1 19:28:27.987: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R4(config-if)#^Z R4# *Mar 1 19:28:33.211: %SYS-5-CONFIG_I: Configured from console by console R4# R4# R4# R4# R4#sh ip Interface FastEthernet0/0 assigned DHCP address 180.40.7.133, mask 255.255.255.224 int            R4# R4# R4# *Mar 1 19:28:48.151: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done R4# *Mar 1 19:29:05.207: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from LOADING to FULL, Loading Done R4#sh ip       config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int fa 0/0 R4(config-if)#noshut ^ % Invalid input detected at '^' marker. R4(config-if)#no shut R4(config-if)# RACK18AS>1 [Resuming connection 1 to r1 ... ] * R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)# option 150 ip 20.20.20.20dns-server 208.28.1.82 omain-name ccie.com efault-router 180.40.7.132network 180.40.7.128 255.255.255.224ip dhcp pool yomomma ! ip dhcp excluded-address 180.40.7.129 180.40.7.132nt e 0/1 p dhcp excluded-address 180.40.7.129 180.40.7.132^Z R1#no % Incomplete command. R1# *Mar 1 19:28:44.665: %SYS-5-CONFIG_I: Configured from console by console R1#no config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#ip dhcp excluded-address 180.40.7.129 180.40.7.132 option 150 ip 20.20.20.20 ip dhcp excluded-address 180.40.7.129 180.40.7.132nip dhcp excluded-address 180.40.7.129 180.40.7.132oip dhcp excluded-address 180.40.7.129 180.40.7.132 ip dhcp excluded-address 180.40.7.129 180.40.7.132 R1(config)#no ip dhcp excluded-address 180.40.7.129 180.40.7.132ip dhcp excluded-address 180.40.7.129 180.40.7.132   44 R1(config)# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4(config-if)#no shut R4(config-if)#^Z R4# *Mar 1 19:30:48.295: %SYS-5-CONFIG_I: Configured from console by console R4# R4# R4# R4#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 180.40.7.133 YES DHCP up up ATM1/0 unassigned YES unset administratively down down Virtual-Access1 unassigned YES unset up up Loopback0 100.1.1.1 YES manual up up Loopback1 192.10.32.18 YES manual up up R4# RACK18AS>1 [Resuming connection 1 to r1 ... ] R1(config)#^Z R1#sh ip d *Mar 1 19:30:58.356: %SYS-5-CONFIG_I: Configured from console by console R1#sh ip dhcp lea ^ % Invalid input detected at '^' marker. R1#sh ip dhcp leadhcp lea dhcp lea dhcp lea  R1#sh ip dhcp ? binding DHCP address bindings conflict DHCP address conflicts database DHCP database agents import Show Imported Parameters pool DHCP pools information relay Miscellaneous DHCP relay information server Miscellaneous DHCP server information R1#sh ip dhcp bi R1#sh ip dhcp binding Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name R1#sh run | b dhcp ip dhcp excluded-address 180.40.7.129 180.40.7.144 ! ip dhcp pool yomomma network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 domain-name ccie.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! --More--   R1# R1# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Mar R3#sh ip de hcp % Incomplete command. R3#sh ip dhcp sh run  | b dhs cp ip dhcp excluded-address 180.40.7.129 180.40.7.132 ! ip dhcp pool yomomma network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 domain-name ccie.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! ip audit notify log ip audit po max-events 100 ! ! mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! --More--   R3# RACK18AS>2 [Resuming connection 2 to r2 ... ] *Mar 1 1 R2#confi gt ^ % Invalid input detected at '^' marker. R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int fa0/1 R2(config-if)#ip heal R2(config-if)#ip heal   R2(config-if)#ip help R2(config-if)#ip helper-address 208.28.1.99 ? redundancy defines VRG group name R2(config-if)#ip helper-address 208.28.1.99 R2(config-if)#^Z R2# *Mar 1 19:39:42.119: %SYS-5-CONFIG_I: Configured from console by console R2# RACK18AS>1 [Resuming connection 1 to r1 ... ] R1#configt  t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int s 0/0.1 2 R1(config-subif)#ip helper-address 208.28.1.99 R1(config-subif)#fram in R1(config-subif)#fram int R1(config-subif)#fram interface-dlci 102 ? cisco Use CISCO Encapsulation ietf Use RFC1490/RFC2427 Encapsulation ppp Use RFC1973 Encapsulation to support PPP over FR protocol Optional protocol information for remote end R1(config-subif)#fram interface-dlci 102 pro R1(config-subif)#fram interface-dlci 102 protocol ? A.B.C.D Protocol specific address ip IP R1(config-subif)#fram interface-dlci 102 protocol ip ? A.B.C.D Protocol specific address R1(config-subif)#fram interface-dlci 102 protocol ip 180.40.7.162 %PVC is already defined R1(config-fr-dlci)#no    do shr  run int s 0/0.2 Building configuration... Current configuration : 218 bytes ! interface Serial0/0.2 point-to-point bandwidth 128 ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay interface-dlci 102 class Prob7b end R1(config-fr-dlci)#exit R1(config-subif)#no frame-relay interface-dlci 102 R1(config-subif)# *Mar 1 19:42:49.442: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial0/0.2 from FULL to DOWN, Neighbor Down: Interface down or detached R1(config-subif)#no frame-relay interface-dlci 102exit do sh run int s 0/0.2fram interface-dlci 102 protocol ip 180.40.7.162 R1(config-fr-dlci)# *Mar 1 19:42:55.356: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial0/0.2 from LOADING to FULL, Loading Done R1(config-fr-dlci)# class Prob7b R1(config-fr-dlci)#exit R1(config-subif)#^Z R1# *Mar 1 19:43:02.111: %SYS-5-CONFIG_I: Configured from console by console R1#sh run | b     int s 0/0.2 Building configuration... Current configuration : 240 bytes ! interface Serial0/0.2 point-to-point bandwidth 128 ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay interface-dlci 102 protocol ip 180.40.7.162 class Prob7b end R1# RACK18AS>2 [Resuming connection 2 to r2 ... ] *Mar R2#sh run int fa 0/1 Building configuration... Current configuration : 125 bytes ! interface FastEthernet0/1 ip address 20.10.1.1 255.255.255.0 ip helper-address 208.28.1.99 duplex auto speed auto end R2# R2# RACK18AS>77  7 [Resuming connection 7 to r7 ... ] R7>en R7# RACK18AS>6 [Resuming connection 6 to r6 ... ] S6#confi gt ^ % Invalid input detected at '^' marker. S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 0/.7  7 S6(config-if)#swi S6(config-if)#switchport mode acc S6(config-if)#swi S6(config-if)#switchport acc vlan 10 S6(config-if)#^Z S6# RACK18AS>7 [Resuming connection 7 to r7 ... ] R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/1 1 R7(config-if)#ip add 180.40.7.158 255.255.255.224 R7(config-if)#do sh     no shut R7(config-if)#^Z R7#ship *Mar 1 19:45:41.196: %SYS-5-CONFIG_I: Configured from console by console    % Type "show ?" for a list of subcommands R7# *Mar 1 19:45:42.462: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to upsh ip in   *Mar 1 19:45:44.966: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to uproute Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set 180.40.0.0/27 is subnetted, 1 subnets C 180.40.7.128 is directly connected, FastEthernet0/1 R7# RACK18AS>1 [Resuming connection 1 to r1 ... ] R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int e 0/1 R1(config-if)#do sh run int e 0/1 Building configuration... Current configuration : 158 bytes ! interface Ethernet0/1 ip address 180.40.7.131 255.255.255.224 service-policy output Prob6 half-duplex standby 1 ip 180.40.7.132 standby 1 preempt end R1(config-if)#no standby 1 ip 180.40.7.132 R1(config-if)#no standby 1 preempt R1(config-if)#^Z R1# *Mar 1 19:47:18.980: %SYS-5-CONFIG_I: Configured from console by console R1# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#config 5t ^ % Invalid input detected at '^' marker. R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0- /90  0 R3(config-if)#no sta a R3(config-if)#no standby 1 R3(config-if)#do sh run in *Mar 1 19:46:39.547: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 1 state Active -> Disabled R3(config-if)#do sh run int fa 0/0 Building configuration... Current configuration : 149 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip route-cache policy ip policy route-map Prob1 duplex auto speed auto end R3(config-if)#gl R3(config-if)#glbp ? <0-1023> Group number R3(config-if)#glbp 1 ? authentication Authentication method forwarder Forwarder configuration ip Enable group and set virtual IP address load-balancing Load balancing method preempt Overthrow lower priority designated routers priority Priority level timers Adjust GLBP timers weighting Gateway weighting and tracking R3(config-if)#glbp 1 ip ? A.B.C.D Virtual IP address R3(config-if)#glbp 1 ip 19 80             do sh ruin  nb  | i track R3(config-if)#exit R3(config)#track R3(config)#track 1 ? interface Select an interface to track ip IP protocol R3(config)#track 1 ip ? route IP route R3(config)#track 1 ip route ? A.B.C.D {/nn || A.B.C.D} Prefix and mask R3(config)#track 1 ip route 20.10.1.0 /24 ? % Unrecognized command R3(config)#track 1 ip route 20.10.1.0 /24      /24 ? metric Route metric reachability Route reachability state R3(config)#track 1 ip route 20.10.1.0/24 re R3(config)#track 1 ip route 20.10.1.0/24 reachability ? R3(config)#track 1 ip route 20.10.1.0/24 reachability R3(config-track)#exit R3(config)#int fa 0/0 R3(config-if)#gl R3(config-if)#glbp 1 ip 180./ 40.7.132 ? secondary Make this IP address a secondary address R3(config-if)#glbp 1 ip 180.40.7.132 R3(config-if)#d glbp ? <0-1023> Group number R3(config-if)#glbp 1 ? authentication Authentication method forwarder Forwarder configuration ip Enable group and set virtual IP address load-balancing Load balancing method preempt Overthrow lower priority designated routers priority Priority level timers Adjust GLBP timers weighting Gateway weighting and tracking R3(config-if)#glbp 1 pro i 150 ? R3(config-if)#glbp 1 pri 150     ? <1-255> Priority value R3(config-if)#glbp 1 pri 150 R3(config-if)#glbap 1 tra R3(config-if)#glbap 1 tra        p *Mar 1 19:48:52.233: %GLBP-6-STATECHANGE: FastEthernet0/0 Grp 1 state Standby -> Active R3(config-if)#glbp 1 tr R3(config-if)#glbp 1 tr  ? authentication Authentication method forwarder Forwarder configuration ip Enable group and set virtual IP address load-balancing Load balancing method preempt Overthrow lower priority designated routers priority Priority level timers Adjust GLBP timers weighting Gateway weighting and tracking R3(config-if)#glbp 1 *Mar 1 19:49:02.233: %GLBP-6-FWDSTATECHANGE: FastEthernet0/0 Grp 1 Fwd 1 state Listen -> Active R3(config-if)#glbp 1 we R3(config-if)#glbp 1 weighting ? <1-254> Weighting maximum value track Interface tracking R3(config-if)#glbp 1 weighting tr R3(config-if)#glbp 1 weighting track ? <1-500> Tracked object R3(config-if)#glbp 1 weighting track 1 ? decrement Weighting decrement R3(config-if)#glbp 1 weighting track 1 de R3(config-if)#glbp 1 weighting track 1 decrement ? <1-255> Decrement value R3(config-if)#glbp 1 weighting track 1 decrement 51 ? R3(config-if)#glbp 1 weighting track 1 decrement 51 R3(config-if)#\ glbp 1 ? authentication Authentication method forwarder Forwarder configuration ip Enable group and set virtual IP address load-balancing Load balancing method preempt Overthrow lower priority designated routers priority Priority level timers Adjust GLBP timers weighting Gateway weighting and tracking R3(config-if)#glbp 1 pre R3(config-if)#glbp 1 preempt R3(config-if)# RACK18AS>7 [Resuming connection 7 to r7 ... ] R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#track R7(config)#track 1 ? interface Select an interface to track ip IP protocol R7(config)#track 1 ip ? route IP route R7(config)#track 1 ip rou 20.10.1.0  /24 re R7(config)#track 1 ip rou 20.10.1.0/24 reachability R7(config-track)#int fa 0/1 R7(config-if)#glbp 1 ip 180.40.7.132 R7(config-if)#glbp 1 pree R7(config-if)#glbp 1 w R7(config-if)#glbp 1 weighting tr R7(config-if)#glbp 1 weighting track ? <1-500> Tracked object R7(config-if)#glbp 1 weighting track 1 de R7(config-if)#glbp 1 weighting track 1 decrement 50 R7(config-if)# *Mar 1 19:50:39.184: %GLBP-6-FWDSTATECHANGE: FastEthernet0/1 Grp 1 Fwd 2 state Listen -> Active^Z R7# *Mar 1 19:50:47.414: %SYS-5-CONFIG_I: Configured from console by console RACK18AS>1 3 [Resuming connection 3 to r3 ... ] R3(config-if)#^Z R3#sh *Mar 1 19:50:53.447: %SYS-5-CONFIG_I: Configured from console by console R3#sh glbp ? BVI Bridge-Group Virtual Interface FastEthernet FastEthernet IEEE 802.3 Port-channel Ethernet Channel of interfaces active Groups in active state brief Brief output capability GLBP capability disabled Groups in disabled state init Groups in init state listen Groups in listen state standby Groups in standby or speak states | Output modifiers R3#sh glbp FastEthernet0/0 - Group 1 State is Active 2 state changes, last state change 00:02:05 Virtual IP address is 180.40.7.132 Hello time 3 sec, hold time 10 sec Next hello sent in 0.107 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption enabled, min delay 0 sec Active is local Standby is 180.40.7.158, priority 100 (expires in 8.345 sec) Priority 150 (configured) Weighting 100 (default 100), thresholds: lower 1, upper 100 Track object 1 state Up decrement 51 Load balancing: round-robin There are 2 forwarders (1 active) Forwarder 1 State is Active 1 state change, last state change 00:01:55 MAC address is 0007.b400.0101 (default) Owner ID is 0013.6030.5fc0 Redirection enabled Preemption enabled, min delay 30 sec Active is local, weighting 100 --More--   Forwarder 2 State is Listen MAC address is 0007.b400.0102 (learnt) Owner ID is 0013.6030.5fa1 Redirection enabled, 598.710 sec remaining (maximum 600 sec) Time to live: 14398.710 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.158 (primary), weighting 50 (expires in 8.706 sec) R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#sh ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.131 25 0009.436c.c021 ARPA FastEthernet0/0 Internet 180.40.7.129 25 0013.6030.5fc0 ARPA FastEthernet0/0 Internet 180.40.7.133 - 0005.5e7b.c300 ARPA FastEthernet0/0 R4#sh ip       configf t ^ % Invalid input detected at '^' marker. R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#ip    no ip route ing R4(config)# *Mar 1 19:54:46.803: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 1 19:54:46.803: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R4(config)#^Z R4#sh ip rout *Mar 1 19:55:02.127: %SYS-5-CONFIG_I: Configured from console by console R4#sh ip route Default gateway is 180.40.7.132 Host Gateway Last Use Total Uses Interface ICMP redirect cache is empty R4#sh arp Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.133 - 0005.5e7b.c300 ARPA FastEthernet0/0 R4#ping 208 .4 10.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/253/1060 ms R4#ping 20.10.1.1sh arp  Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.129 0 0013.6030.5fc0 ARPA FastEthernet0/0 Internet 180.40.7.133 - 0005.5e7b.c300 ARPA FastEthernet0/0 R4# R4# R4# R4# R4# R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Mar 1 R3#sh ip int            RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#ping 180.40.7.132 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.132, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms R4#ping 180.40.7.132sh arp  Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.129 0 0013.6030.5fc0 ARPA FastEthernet0/0 Internet 180.40.7.133 - 0005.5e7b.c300 ARPA FastEthernet0/0 R4# R4# R4# R4# R4# R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh ip int fa 0/0 FastEthernet0/0 is up, line protocol is up Internet address is 180.40.7.129/27 Broadcast address is 255.255.255.255 Address determined by setup command MTU is 1500 bytes Helper address is not set Directed broadcast forwarding is disabled Multicast reserved groups joined: 224.0.0.5 224.0.0.6 224.0.0.102 Outgoing access list is not set Inbound access list is not set Proxy ARP is enabled Local Proxy ARP is disabled Security level is default Split horizon is enabled ICMP redirects are always sent ICMP unreachables are always sent ICMP mask replies are never sent IP fast switching is enabled IP fast switching on the same interface is disabled IP Flow switching is disabled IP CEF switching is disabled IP Feature Fast switching turbo vector IP multicast fast switching is enabled --More--   R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#no ip pro R3(config-if)#no ip proxy-arp R3(config-if)# RACK18AS>e 1 [Resuming connection 1 to r1 ... ] *M R1#e   config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#e 0/1 ^ % Invalid input detected at '^' marker. R1(config)#e 0   int e 0/1 R1(config-if)#int e 0/1e 0/1 int e 0/1 no ip proxy-arp R1(config-if)#^Z R1# *Mar 1 19:55:40.907: %SYS-5-CONFIG_I: Configured from console by console R1# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#clea arp R4#clea arpsh arp ping 180.40.7.132sh arp ping 20.10.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/251/1044 ms R4#ping 20.10.1.1clea arp  R4#clea arpping 20.10.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/252/1056 ms R4#ping 20.10.1.1clea arp ping 20.10.1.1clea arp sh arp  Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.129 0 0013.6030.5fc0 ARPA FastEthernet0/0 Internet 180.40.7.133 - 0005.5e7b.c300 ARPA FastEthernet0/0 R4#sh arp ship     iop    p route Default gateway is 180.40.7.132 Host Gateway Last Use Total Uses Interface ICMP redirect cache is empty R4# R4# R4# R4# R4#ping 180.40.7.132 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.132, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/4 ms R4#ping 180.40.7.132sh ip route arp  Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.129 0 0013.6030.5fc0 ARPA FastEthernet0/0 Internet 180.40.7.133 - 0005.5e7b.c300 ARPA FastEthernet0/0 R4# R4# R4# R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3(config-if)#^Z R3#sh g *Mar 1 19:56:59.928: %SYS-5-CONFIG_I: Configured from console by console R3#sh glbp ? BVI Bridge-Group Virtual Interface FastEthernet FastEthernet IEEE 802.3 Port-channel Ethernet Channel of interfaces active Groups in active state brief Brief output capability GLBP capability disabled Groups in disabled state init Groups in init state listen Groups in listen state standby Groups in standby or speak states | Output modifiers R3#sh glbp bri R3#sh glbp brief Interface Grp Fwd Pri State Address Active router Standby router Fa0/0 1 - 150 Active 180.40.7.132 local 180.40.7.158 Fa0/0 1 1 7 Active 0007.b400.0101 local - Fa0/0 1 2 7 Listen 0007.b400.0102 180.40.7.158 - R3# R3# R3# R3# R3# R3# R3# R3#sh run |   b   | b track track 1 ip route 20.10.1.0 255.255.255.0 reachability mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! --More--  interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 no ip proxy-arp ip route-cache policy ip policy route-map Prob1 duplex auto speed auto glbp 1 ip 180.40.7.132 glbp 1 priority 150 glbp 1 preempt glbp 1 weighting track 1 decrement 51 ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 --More--   R3# RACK18AS>7 [Resuming connection 7 to r7 ... ] R7> R7>en R7#sh run | b track track 1 ip route 20.10.1.0 255.255.255.0 reachability mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! --More--  interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 180.40.7.158 255.255.255.224 duplex auto speed auto glbp 1 ip 180.40.7.132 glbp 1 preempt glbp 1 weighting track 1 decrement 50 ! interface Serial1/0 no ip address shutdown ! interface Serial1/1 --More--   R7# RACK18AS>1 [Resuming connection 1 to r1 ... ] R1#sh run Building configuration... Current configuration : 2193 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! logging queue-limit 100 logging buffered 4096 debugging ! memory-size iomem 10 ip subnet-zero ! ! no ip domain lookup ip dhcp excluded-address 180.40.7.129 180.40.7.144 ! ip dhcp pool yomomma network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 --More--   R1#  sh run Building configuration... Current configuration : 2193 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! logging queue-limit 100 logging buffered 4096 debugging ! memory-size iomem 10 ip subnet-zero ! ! no ip domain lookup ip dhcp excluded-address 180.40.7.129 180.40.7.144 ! ip dhcp pool yomomma network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 --More--   domain-name ccie.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! class-map match-all S5Telnet match access-group 100 --More--   class-map match-all S5OtherStuff match access-group 101 ! ! policy-map Prob6 class S5Telnet bandwidth 1000 class S5OtherStuff police cir 5000000 conform-action transmit exceed-action set-prec-transmit 3 ! ! ! ! interface Ethernet0/0 ip address 208.28.1.1 255.255.255.0 half-duplex ! interface Serial0/0 bandwidth 128 no ip address encapsulation frame-relay --More--  ! interface Serial0/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 103 ! interface Serial0/0.2 point-to-point bandwidth 128 ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay interface-dlci 102 protocol ip 180.40.7.162 class Prob7b ! interface Ethernet0/1 ip address 180.40.7.131 255.255.255.224 no ip proxy-arp service-policy output Prob6 half-duplex ! interface Serial0/1 no ip address shutdown --More--  ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server ip classless ! ! ! ! map-class frame-relay Prob7b frame-relay priority-group 1 access-list 100 permit tcp host 208.28.1.2 any eq telnet access-list 101 permit ip host 208.28.1.2 any priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! call rsvp-sync ! ! mgcp profile default --More--  ! dial-peer cor custom ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! ! end R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#a access-list             ip access-list ? extended Extended Access List log-update Control access list log updates logging Control access list logging resequence Resequence Access List standard Standard Access List R1(config)#ip access-list ex ? <100-199> Extended IP access-list number <2000-2699> Extended IP access-list number (expanded range) WORD Access-list name R1(config)#ip access-list ex Teletn   net ? R1(config)#ip access-list ex Telnet R1(config-ext-nacl)#ip    t per tcp any any eq 23 R1(config-ext-nacl)#exit R1(config)#exitper tcp any any eq 23ip access-list ex Telnet        FTP R1(config-ext-nacl)#per tcp any any eq 2 20 R1(config-ext-nacl)#per tcp any any eq 20 1 R1(config-ext-nacl)#exit R1(config)#class-map Teletn   net R1(config-cmap)#match acc R1(config-cmap)#match access-group Telnet ^ % Invalid input detected at '^' marker. R1(config-cmap)#match access-group Telnet      ? <1-2699> Access list index name Named Access List R1(config-cmap)#match access-group name Telnet R1(config-cmap)#exi  xit R1(config)#class-map FTP R1(config-cmap)#match ad ccess name FTP R1(config-cmap)#exit R1(config)#poo  po  ol R1(config)#policy-map Optional ? R1(config)#policy-map Optional R1(config-pmap)#class ftp % class map ftp not configured R1(config-pmap)#class ftp   FTP R1(config-pmap-c)#ba R1(config-pmap-c)#bandwidth ? <8-2000000> Kilo Bits per second percent % of total Bandwidth remaining % of the remaining bandwidth R1(config-pmap-c)#bandwidth per R1(config-pmap-c)#bandwidth percent 25 R1(config-pmap-c)#exit R1(config-pmap)#class Telnet R1(config-pmap-c)#ban per 25 R1(config-pmap-c)#int e 0/1 R1(config-if)#ser R1(config-if)#service-policy Optional out ^ % Invalid input detected at '^' marker. R1(config-if)#service-policy Optional outt            out R1(config-if)#service-policy output Optional;  Policy map Prob6 is already attached R1(config-if)#no service out Prob6 R1(config-if)#no service out Prob6service-policy output Optional R1(config-if)#^Z R1# *Mar 1 20:17:26.964: %SYS-5-CONFIG_I: Configured from console by console R1#sh poil R1#sh poil ^ % Invalid input detected at '^' marker. R1#sh poil  l R1#sh policy-map Policy Map Prob6 Class S5Telnet Bandwidth 1000 (kbps) Max Threshold 64 (packets) Class S5OtherStuff police cir 5000000 bc 156250 conform-action transmit exceed-action set-prec-transmit 3 Policy Map Optional Class FTP Bandwidth 25 (%) Max Threshold 64 (packets) Class Telnet Bandwidth 25 (%) Max Threshold 64 (packets) R1#sh policy-map int e 0/1 Ethernet0/1 Service-policy output: Optional Class-map: FTP (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name FTP Queueing Output Queue: Conversation 265 Bandwidth 25 (%) Bandwidth 2500 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: Telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Telnet Queueing Output Queue: Conversation 266 Bandwidth 25 (%) Bandwidth 2500 (kbps) Max Threshold 64 (packets) --More--   (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: class-default (match-any) 5 packets, 669 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R1# R1# R1# R1# R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#poli R1(config)#policy-map Optional R1(config-pmap)#clas class-default R1(config-pmap-c)#ban per 50 I/f Ethernet0/1 class class-default requested bandwidth 50%, available only 25% R1(config-pmap-c)#int e 0/1 R1(config-if)#ser ? history Keep history of QoS metrics input Assign policy-map to the input of an interface output Assign policy-map to the output of an interface R1(config-if)#ser     ba  re R1(config-if)#re? % Unrecognized command R1(config-if)#re  servi R1(config-if)#service-policy ? history Keep history of QoS metrics input Assign policy-map to the input of an interface output Assign policy-map to the output of an interface R1(config-if)#service-policy out > ? WORD policy-map name R1(config-if)#service-policy out                    ban R1(config-if)#bandwidth ? <1-10000000> Bandwidth in kilobits inherit Specify how bandwidth is inherited R1(config-if)#bandwidth           pol R1(config-if)#pol? % Unrecognized command R1(config-if)#pol   ma R1(config-if)#ma? mac-address max-reserved-bandwidth R1(config-if)#max   R1(config-if)#max-reserved-bandwidth ? <1-100> Max. reservable bandwidth as % of interface bandwidth R1(config-if)#max-reserved-bandwidth 100 ? R1(config-if)#max-reserved-bandwidth 100   R1(config-if)#max-reserved-bandwidth 100int e 0/1 ban per 50clas class-defaultpolicy-map Optional R1(config-pmap)#policy-map Optionalmax-reserved-bandwidth 100int e 0/1 ban per 50clas class-default R1(config-pmap-c)#clas class-defaultpolicy-map Optionalmax-reserved-bandwidth 100int e 0/1 ban per 50 R1(config-pmap-c)#^Z R1# *Mar 1 20:22:59.200: %SYS-5-CONFIG_I: Configured from console by console R1#config tsh policy-map int e 0/1 Ethernet0/1 Service-policy output: Optional Class-map: FTP (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name FTP Queueing Output Queue: Conversation 265 Bandwidth 25 (%) Bandwidth 2500 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: Telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Telnet Queueing Output Queue: Conversation 266 Bandwidth 25 (%) Bandwidth 2500 (kbps) Max Threshold 64 (packets) --More--   (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: class-default (match-any) 73 packets, 7342 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Output Queue: Conversation 267 Bandwidth 50 (%) Bandwidth 5000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 R1#sh run | b interface Ethernet  0/1 interface Ethernet0/1 ip address 180.40.7.131 255.255.255.224 no ip proxy-arp max-reserved-bandwidth 100 service-policy output Optional half-duplex ! interface Serial0/1 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server ip classless ! ! ! ip access-list extended FTP permit tcp any any eq ftp-data permit tcp any any eq ftp --More--  ip access-list extended Telnet permit tcp any any eq telnet ! ! map-class frame-relay Prob7b frame-relay priority-group 1 access-list 100 permit tcp host 208.28.1.2 any eq telnet access-list 101 permit ip host 208.28.1.2 any priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! call rsvp-sync ! ! mgcp profile default ! dial-peer cor custom ! ! ! ! line con 0 --More--   R1#sh run Building configuration... Current configuration : 2632 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! logging queue-limit 100 logging buffered 4096 debugging ! memory-size iomem 10 ip subnet-zero ! ! no ip domain lookup ip dhcp excluded-address 180.40.7.129 180.40.7.144 ! ip dhcp pool yomomma network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 --More--   domain-name ccie.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! class-map match-all Telnet match access-group name Telnet --More--   class-map match-all FTP match access-group name FTP class-map match-all S5Telnet match access-group 100 class-map match-all S5OtherStuff match access-group 101 ! ! policy-map Prob6 class S5Telnet bandwidth 1000 class S5OtherStuff police cir 5000000 conform-action transmit exceed-action set-prec-transmit 3 policy-map Optional class FTP bandwidth percent 25 class Telnet bandwidth percent 25 class class-default bandwidth percent 50 ! --More--  ! ! ! interface Ethernet0/0 ip address 208.28.1.1 255.255.255.0 half-duplex ! interface Serial0/0 bandwidth 128 no ip address encapsulation frame-relay ! interface Serial0/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 103 ! interface Serial0/0.2 point-to-point bandwidth 128 ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay interface-dlci 102 protocol ip 180.40.7.162 --More--   class Prob7b ! interface Ethernet0/1 ip address 180.40.7.131 255.255.255.224 no ip proxy-arp max-reserved-bandwidth 100 service-policy output Optional half-duplex ! interface Serial0/1 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server ip classless ! ! ! ip access-list extended FTP --More--   permit tcp any any eq ftp-data permit tcp any any eq ftp ip access-list extended Telnet permit tcp any any eq telnet ! ! map-class frame-relay Prob7b frame-relay priority-group 1 access-list 100 permit tcp host 208.28.1.2 any eq telnet access-list 101 permit ip host 208.28.1.2 any priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! call rsvp-sync ! ! mgcp profile default ! dial-peer cor custom ! ! ! --More--   R1#sh run | b interface Ethernet0/1policy-map int e 0/1  Ethernet0/1 Service-policy output: Optional Class-map: FTP (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name FTP Queueing Output Queue: Conversation 265 Bandwidth 25 (%) Bandwidth 2500 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: Telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Telnet Queueing Output Queue: Conversation 266 Bandwidth 25 (%) Bandwidth 2500 (kbps) Max Threshold 64 (packets) --More--   (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: class-default (match-any) 127 packets, 12619 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Output Queue: Conversation 267 Bandwidth 50 (%) Bandwidth 5000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 5/1521 (depth/total drops/no-buffer drops) 0/0/0 R1# R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#class-map SQL R1(config-cmap)#pr R1(config-cmap)#pr  ? QoS class-map configuration commands: description Class-Map description exit Exit from QoS class-map configuration mode match classification criteria no Negate or set default values of a command rename Rename this class-map R1(config-cmap)#ma R1(config-cmap)#match p R1(config-cmap)#match po r R1(config-cmap)#match pr  ? access-group Access group any Any packets class-map Class map cos IEEE 802.1Q/ISL class of service/user priority values destination-address Destination address discard-class Discard behavior identifier dscp Match DSCP in IP(v4) and IPv6 packets fr-de Match on Frame-relay DE bit fr-dlci Match on fr-dlci input-interface Select an input interface to match ip IP specific values mpls Multi Protocol Label Switching specific values not Negate this match result packet Layer 3 Packet length precedence Match Precedence in IP(v4) and IPv6 packets protocol Protocol qos-group Qos-group source-address Source address R1(config-cmap)#match pro ? arp IP ARP bgp Border Gateway Protocol bridge Bridging bstun Block Serial Tunnel cdp Cisco Discovery Protocol citrix Citrix Traffic clns ISO CLNS clns_es ISO CLNS End System clns_is ISO CLNS Intermediate System cmns ISO CMNS compressedtcp Compressed TCP cuseeme CU-SeeMe desktop video conference custom-01 Custom protocol custom-01 custom-02 Custom protocol custom-02 custom-03 Custom protocol custom-03 custom-04 Custom protocol custom-04 custom-05 Custom protocol custom-05 custom-06 Custom protocol custom-06 custom-07 Custom protocol custom-07 custom-08 Custom protocol custom-08 custom-09 Custom protocol custom-09 custom-10 Custom protocol custom-10 --More--   decnet DECnet decnet_node DECnet Node decnet_router-l1 DECnet Router L1 decnet_router-l2 DECnet Router L2 dhcp Dynamic Host Configuration dlsw Data Link Switching dns Domain Name Server lookup egp Exterior Gateway Protocol eigrp Enhanced Interior Gateway Routing Protocol exchange MS-RPC for Exchange fasttrack FastTrack Traffic - KaZaA, Morpheus, Grokster... finger Finger ftp File Transfer Protocol gnutella Gnutella Traffic - BearShare,LimeWire,Gnotella... gopher Gopher gre Generic Routing Encapsulation http World Wide Web traffic icmp Internet Control Message imap Internet Message Access Protocol ip IP ipinip IP in IP (encapsulation) ipsec IP Security Protocol (ESP/AH) ipv6 IPV6 --More--   ipx Novell IPX irc Internet Relay Chat kazaa2 Kazaa Version 2 kerberos Kerberos l2tp L2F/L2TP tunnel ldap Lightweight Directory Access Protocol llc2 llc2 napster Napster Traffic netbios NetBIOS netshow Microsoft Netshow nfs Network File System nntp Network News Transfer Protocol notes Lotus Notes(R) novadigm Novadigm EDM ntp Network Time Protocol pad PAD links pcanywhere Symantec pcANYWHERE pop3 Post Office Protocol pppoe PPP over Ethernet pptp Point-to-Point Tunneling Protocol printer print spooler/lpd qllc qllc protocol rcmd BSD r-commands (rsh, rlogin, rexec) --More--   realaudio Real Audio streaming protocol rip Routing Information Protocol rsrb Remote Source-Route Bridging rsvp Resource Reservation Protocol rtp Real Time Protocol rtspplayer RTSP players streaming protocol secure-ftp FTP over TLS/SSL secure-http Secured HTTP secure-imap Internet Message Access Protocol over TLS/SSL secure-irc Internet Relay Chat over TLS/SSL secure-ldap Lightweight Directory Access Protocol over TLS/SSL secure-nntp Network News Transfer Protocol over TLS/SSL secure-pop3 Post Office Protocol over TLS/SSL secure-telnet Telnet over TLS/SSL smtp Simple Mail Transfer Protocol snapshot Snapshot routing support snmp Simple Network Mangement Protocol socks SOCKS sqlnet SQL*NET for Oracle sqlserver MS SQL Server ssh Secured Shell streamwork Xing Technology StreamWorks player stun Serial Tunnel --More--   sunrpc Sun RPC syslog System Logging Utility telnet Telnet tftp Trivial File Transfer Protocol vdolive VDOLive streaming video vofr voice over Frame Relay packets xwindows X-Windows remote access R1(config-cmap)#match pro sqlserver ? R1(config-cmap)#match pro sqlserver   R1(config-cmap)#exit R1(config)#exitmatch pro sqlserverclass-map SQL ban per 50 clas class-defaultpolicy-map Optional R1(config-pmap)#clas  s SQL R1(config-pmap-c)#prw i R1(config-pmap-c)#priority ? <8-2000000> Kilo Bits per second percent % of total bandwidth R1(config-pmap-c)#priority          ? QoS policy-map class configuration commands: bandwidth Bandwidth compression Activate Compression drop Drop all packets exit Exit from QoS class action configuration mode no Negate or set default values of a command police Police priority Strict Scheduling Priority for this Class queue-limit Queue Max Threshold for Tail Drop random-detect Enable Random Early Detection as drop policy service-policy Configure QoS Service Policy set Set QoS values shape Traffic Shaping R1(config-pmap-c)#sh  R1(config-pmap-c)#sh   R1(config-pmap-c)#shape ? adaptive Enable Traffic Shaping adaptation to BECN average configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc only per interval fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fr-voice-adapt Enable rate adjustment depending on voice presence max-buffers Set Maximum Buffer Limit peak configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc+Be per interval R1(config-pmap-c)#shape       exit R1(config-pmap)#exit R1(config)#no exitclass SQLnclass SQLoclass SQL class SQL ^ % Invalid input detected at '^' marker. R1(config)#no class SQL- SQLm SQLa SQLp SQL % Class-map SQL is being used R1(config)#no class-map SQL SQL exit class SQLpolicy-map Optional R1(config-pmap)#policy-map Optionalno class-map SQL  SQL  R1(config-pmap)#exit R1(config)#exitno class SQLpolicy-map Optionalno class SQL policy-map Optionalno class-map SQL  R1(config)#ip access-list exten R1(config)#ip access-list extended SQL R1(config-ext-nacl)#per tcp any host 87.23.11.123 eq ? <0-65535> Port number bgp Border Gateway Protocol (179) chargen Character generator (19) cmd Remote commands (rcmd, 514) daytime Daytime (13) discard Discard (9) domain Domain Name Service (53) echo Echo (7) exec Exec (rsh, 512) finger Finger (79) ftp File Transfer Protocol (21) ftp-data FTP data connections (20) gopher Gopher (70) hostname NIC hostname server (101) ident Ident Protocol (113) irc Internet Relay Chat (194) klogin Kerberos login (543) kshell Kerberos shell (544) login Login (rlogin, 513) lpd Printer service (515) nntp Network News Transport Protocol (119) pim-auto-rp PIM Auto-RP (496) --More--   pop2 Post Office Protocol v2 (109) pop3 Post Office Protocol v3 (110) smtp Simple Mail Transport Protocol (25) sunrpc Sun Remote Procedure Call (111) syslog Syslog (514) tacacs TAC Access Control System (49) talk Talk (517) telnet Telnet (23) time Time (37) uucp Unix-to-Unix Copy Program (540) whois Nicname (43) www World Wide Web (HTTP, 80) R1(config-ext-nacl)#per tcp any host 87.23.11.123 eq 1521    1422  33 R1(config-ext-nacl)#per tcp any host 87.23.11.123 eq 1433 4p any host 87.23.11.123 eq 1434 p any host 87.23.11.123 eq 1434 up any host 87.23.11.123 eq 1434dp any host 87.23.11.123 eq 1434 R1(config-ext-nacl)#dos h      sh access0 -list Extended IP access list 100 10 permit tcp host 208.28.1.2 any eq telnet Extended IP access list 101 10 permit ip host 208.28.1.2 any Extended IP access list FTP 10 permit tcp any any eq ftp-data 20 permit tcp any any eq ftp Extended IP access list SQL 10 permit tcp any host 87.23.11.123 eq 1433 20 permit udp any host 87.23.11.123 eq 1434 Extended IP access list Telnet 10 permit tcp any any eq telnet R1(config-ext-nacl)#do sh access-listper udp any host 87.23.11.123 eq 1434p any host 87.23.11.123 eq 1434 p any host 87.23.11.123 eq 1434 tp any host 87.23.11.123 eq 1434cp any host 87.23.11.123 eq 1434 R1(config-ext-nacl)#per tcp any host 87.23.11.123 eq 1434 do sh access-list per udp any host 87.23.11.123 eq 1434 3 R1(config-ext-nacl)#exit R1(config)#class-map SQL R1(config-cmap)#match acc R1(config-cmap)#match access-group SQL   name SQL R1(config-cmap)#exit R1(config)#poliu   R1(config)#policy-map Optional R1(config-pmap)#class SQL R1(config-pmap-c)#ban R1(config-pmap-c)#bandwidth           sha R1(config-pmap-c)#shape ? adaptive Enable Traffic Shaping adaptation to BECN average configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc only per interval fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fr-voice-adapt Enable rate adjustment depending on voice presence max-buffers Set Maximum Buffer Limit peak configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc+Be per interval R1(config-pmap-c)#shape       ? QoS policy-map class configuration commands: bandwidth Bandwidth compression Activate Compression drop Drop all packets exit Exit from QoS class action configuration mode no Negate or set default values of a command police Police priority Strict Scheduling Priority for this Class queue-limit Queue Max Threshold for Tail Drop random-detect Enable Random Early Detection as drop policy service-policy Configure QoS Service Policy set Set QoS values shape Traffic Shaping R1(config-pmap-c)#pri R1(config-pmap-c)#priority ? <8-2000000> Kilo Bits per second percent % of total bandwidth R1(config-pmap-c)#priority 56 ? <32-2000000> Burst in bytes R1(config-pmap-c)#priority 56 128~         ? <8-2000000> Kilo Bits per second percent % of total bandwidth R1(config-pmap-c)#priority 56 ? <32-2000000> Burst in bytes R1(config-pmap-c)#priority 56 128 I/f Ethernet0/1 class SQL requested bandwidth 56 (kbps), available only 0 (kbps) R1(config-pmap-c)#exit R1(config-pmap)#no class class-default R1(config-pmap)#no class class-defaultexit priority 56 128class SQL  R1(config-pmap-c)#class SQLno class class-defaultexit priority 56 128 R1(config-pmap-c)#int e 0/1 R1(config-if)#no ma R1(config-if)#no max R1(config-if)#no max-reserved-bandwidth 100 R1(config-if)#^Z R1#sh *Mar 1 20:43:36.609: %SYS-5-CONFIG_I: Configured from console by console R1#sh s pol R1#sh policy-map in e 0/1 Ethernet0/1 Service-policy output: Optional Class-map: FTP (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name FTP Queueing Output Queue: Conversation 265 Bandwidth 25 (%) Bandwidth 2500 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: Telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Telnet Queueing Output Queue: Conversation 266 Bandwidth 25 (%) Bandwidth 2500 (kbps) Max Threshold 64 (packets) --More--   (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: SQL (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name SQL Queueing Strict Priority Output Queue: Conversation 264 Bandwidth 56 (kbps) Burst 128 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: class-default (match-any) 351 packets, 34753 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R1#sh runb    Building configuration... Current configuration : 2840 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! logging queue-limit 100 logging buffered 4096 debugging ! memory-size iomem 10 ip subnet-zero ! ! no ip domain lookup ip dhcp excluded-address 180.40.7.129 180.40.7.144 ! ip dhcp pool yomomma network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 --More--   domain-name ccie.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! class-map match-all Telnet match access-group name Telnet --More--   class-map match-all FTP match access-group name FTP class-map match-all S5Telnet match access-group 100 class-map match-all SQL match access-group name SQL class-map match-all S5OtherStuff match access-group 101 ! ! policy-map Prob6 class S5Telnet bandwidth 1000 class S5OtherStuff police cir 5000000 conform-action transmit exceed-action set-prec-transmit 3 policy-map Optional class FTP bandwidth percent 25 class Telnet bandwidth percent 25 class SQL --More--   priority 56 128 ! ! ! ! interface Ethernet0/0 ip address 208.28.1.1 255.255.255.0 half-duplex ! interface Serial0/0 bandwidth 128 no ip address encapsulation frame-relay ! interface Serial0/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 103 ! interface Serial0/0.2 point-to-point bandwidth 128 ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 --More--   ip ospf network point-to-multipoint frame-relay interface-dlci 102 protocol ip 180.40.7.162 class Prob7b ! interface Ethernet0/1 ip address 180.40.7.131 255.255.255.224 no ip proxy-arp service-policy output Optional half-duplex ! interface Serial0/1 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server ip classless ! ! ! --More--   R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#pol R1(config)#policy-map Optional R1(config-pmap)#class class-default R1(config-pmap-c)#? QoS policy-map class configuration commands: bandwidth Bandwidth compression Activate Compression drop Drop all packets exit Exit from QoS class action configuration mode fair-queue Enable Flow-based Fair Queuing in this Class no Negate or set default values of a command police Police priority Strict Scheduling Priority for this Class queue-limit Queue Max Threshold for Tail Drop random-detect Enable Random Early Detection as drop policy service-policy Configure QoS Service Policy set Set QoS values shape Traffic Shaping R1(config-pmap-c)#qu R1(config-pmap-c)#queue-limit ? <1-512> Packets R1(config-pmap-c)#queue-limit R1# *Mar 1 20:48:07.709: %SYS-5-CONFIG_I: Configured from console by console R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#class class-defaultpolicy-map Optionalno max-reserved-bandwidth 100policy-map Optional  R1(config-pmap)#policy-map Optionalclass class-defaultpolicy-map Optional qu R1(config-pmap)#qu  clas   ss class-f dea fault R1(config-pmap-c)#q R1(config-pmap-c)#queue-limit ? <1-512> Packets R1(config-pmap-c)#queue-limit 128 fair-queue or bandwidth on the class is required to issue this command R1(config-pmap-c)#fa R1(config-pmap-c)#fair-queue R1(config-pmap-c)#fair-queue queue-limit 128 R1(config-pmap-c)# R1(config-pmap-c)# R1(config-pmap-c)#^Z R1#sh r *Mar 1 20:55:51.562: %SYS-5-CONFIG_I: Configured from console by console R1#sh run | % Incomplete command. R1#sh run |     Building configuration... Current configuration : 2895 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! logging queue-limit 100 logging buffered 4096 debugging ! memory-size iomem 10 ip subnet-zero ! ! no ip domain lookup ip dhcp excluded-address 180.40.7.129 180.40.7.144 ! ip dhcp pool yomomma network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 --More--   domain-name ccie.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! class-map match-all Telnet match access-group name Telnet --More--   class-map match-all FTP match access-group name FTP class-map match-all S5Telnet match access-group 100 class-map match-all SQL match access-group name SQL class-map match-all S5OtherStuff match access-group 101 ! ! policy-map Prob6 class S5Telnet bandwidth 1000 class S5OtherStuff police cir 5000000 conform-action transmit exceed-action set-prec-transmit 3 policy-map Optional class FTP bandwidth percent 25 class Telnet bandwidth percent 25 class SQL --More--   priority 56 128 class class-default fair-queue queue-limit 128 ! ! ! ! interface Ethernet0/0 ip address 208.28.1.1 255.255.255.0 half-duplex ! interface Serial0/0 bandwidth 128 no ip address encapsulation frame-relay ! interface Serial0/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 103 ! interface Serial0/0.2 point-to-point --More--   R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#\ queue-limit 128fair-queue queue-limit 128class class-defaultpolicy-map Optional R1(config-pmap)#policy-map Optionalqueue-limit 128 fair-queue queue-limit 128class class-defaultpolicy-map Optionalclass class-default R1(config-pmap-c)#no queue-limit 128 R1(config-pmap-c)#do shg    pol int e 0/1 Ethernet0/1 Service-policy output: Optional Class-map: FTP (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name FTP Queueing Output Queue: Conversation 265 Bandwidth 25 (%) Bandwidth 2500 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: Telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Telnet Queueing Output Queue: Conversation 266 Bandwidth 25 (%) Bandwidth 2500 (kbps) Max Threshold 64 (packets) --More--   (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: SQL (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name SQL Queueing Strict Priority Output Queue: Conversation 264 Bandwidth 56 (kbps) Burst 128 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: class-default (match-any) 539 packets, 53287 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 256 (total queued/total drops/no-buffer drops) 0/0/0 R1(config-pmap-c)# R1(config-pmap-c)# R1(config-pmap-c)# R1(config-pmap-c)#do sh pol int e 0/1no queue-limit 128   512no queue-limit 512  queue-limit 512  queue-limit 512  R1(config-pmap-c)#exit R1(config-pmap)#exit R1(config)#pol; icy Prob16  After 15 R1(config-pmap)#class telnet      Telnet R1(config-pmap-c)#exit R1(config-pmap)#clas FTP R1(config-pmap-c)#ba R1(config-pmap-c)#bandwidth 256 R1(config-pmap-c)#exit R1(config-pmap)#exitbandwidth 256clas FTP exit class Telnet R1(config-pmap-c)#? QoS policy-map class configuration commands: bandwidth Bandwidth compression Activate Compression drop Drop all packets exit Exit from QoS class action configuration mode no Negate or set default values of a command police Police priority Strict Scheduling Priority for this Class queue-limit Queue Max Threshold for Tail Drop random-detect Enable Random Early Detection as drop policy service-policy Configure QoS Service Policy set Set QoS values shape Traffic Shaping R1(config-pmap-c)#sha R1(config-pmap-c)#shape ? adaptive Enable Traffic Shaping adaptation to BECN average configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc only per interval fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fr-voice-adapt Enable rate adjustment depending on voice presence max-buffers Set Maximum Buffer Limit peak configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc+Be per interval R1(config-pmap-c)#shape       pol R1(config-pmap-c)#police ? <8000-2000000000> Bits per second cir Committed information rate R1(config-pmap-c)#police 56000 ? <1000-512000000> Burst bytes bc Conform burst conform-action action when rate is less than conform burst pir Peak Information Rate R1(config-pmap-c)#police 56000 1400 ? <1000-512000000> Burst bytes be Excess burst conform-action action when rate is less than conform burst pir Peak Information Rate R1(config-pmap-c)#police 56000 1400 3500 ? conform-action action when rate is less than conform burst R1(config-pmap-c)#police 56000 1400 3500 con R1(config-pmap-c)#police 56000 1400 3500 conform-action ? drop drop packet exceed-action action when rate is within conform and conform + exceed burst set-clp-transmit set atm clp and send it set-discard-class-transmit set discard-class and send it set-dscp-transmit set dscp and send it set-frde-transmit set FR DE and send it set-mpls-exp-imposition-transmit set exp at tag imposition and send it set-mpls-exp-topmost-transmit set exp on topmost label and send it set-prec-transmit rewrite packet precedence and send it set-qos-transmit set qos-group and send it transmit transmit packet R1(config-pmap-c)#police 56000 1400 3500 conform-action s R1(config-pmap-c)#police 56000 1400 3500 conform-action set-pr R1(config-pmap-c)#police 56000 1400 3500 conform-action set-prec-transmit 1   ? <0-7> new precedence R1(config-pmap-c)#police 56000 1400 3500 conform-action set-prec-transmit 1 ? exceed-action action when rate is within conform and conform + exceed burst R1(config-pmap-c)#police 56000 1400 3500 conform-action set-prec-transmit 1 e$0 1400 3500 conform-action set-prec-transmit 1 ex  R1(config-pmap-c)#$0 conform-action set-prec-transmit 1 exceed-action ? drop drop packet set-clp-transmit set atm clp and send it set-discard-class-transmit set discard-class and send it set-dscp-transmit set dscp and send it set-frde-transmit set FR DE and send it set-mpls-exp-imposition-transmit set exp at tag imposition and send it set-mpls-exp-topmost-transmit set exp on topmost label and send it set-prec-transmit rewrite packet precedence and send it set-qos-transmit set qos-group and send it transmit transmit packet R1(config-pmap-c)#$0 conform-action set-prec-transmit 1 exceed-action se R1(config-pmap-c)#$0 conform-action set-prec-transmit 1 exceed-action set-p R1(config-pmap-c)#$-prec-transmit 1 exceed-action set-prec-transmit 0 ? violate-action action when rate is greater than conform + exceed burst R1(config-pmap-c)#$-prec-transmit 1 exceed-action set-prec-transmit 0 vi R1(config-pmap-c)#$smit 1 exceed-action set-prec-transmit 0 violate-action ? drop drop packet set-clp-transmit set atm clp and send it set-discard-class-transmit set discard-class and send it set-dscp-transmit set dscp and send it set-frde-transmit set FR DE and send it set-mpls-exp-imposition-transmit set exp at tag imposition and send it set-mpls-exp-topmost-transmit set exp on topmost label and send it set-prec-transmit rewrite packet precedence and send it set-qos-transmit set qos-group and send it transmit transmit packet R1(config-pmap-c)#$smit 1 exceed-action set-prec-transmit 0 violate-action dreed-action set-prec-transmit 0 violate-action dro  R1(config-pmap-c)#$eed-action set-prec-transmit 0 violate-action drop R1(config-pmap-c-police)#exit R1(config-pmap-c)#exit R1(config-pmap)#class class-default R1(config-pmap-c)#fa R1(config-pmap-c)#fair-queue R1(config-pmap-c)#qu R1(config-pmap-c)#queue-limit 100 R1(config-pmap-c)#int s 0/0;.l   .1 R1(config-subif)#ser R1(config-subif)#service-policy ProbAfter15 out ^ % Invalid input detected at '^' marker. R1(config-subif)#service-policy ProbAfter15 outoint s 0/0.1 service-policy ProbAfter15 out15 out  ^ % Invalid input detected at '^' marker. R1(config-subif)#service-policy ProbAfte15 outt    oProbAfte15uProbAfte15tProbAfte15 ProbAfte15 CBWFQ : Not supported on subinterfaces R1(config-subif)# R1(config-subif)# R1(config-subif)# R1(config-subif)# R1(config-subif)#fram int R1(config-subif)#fram interface-dlci 103 %PVC is already defined R1(config-fr-dlci)#? Frame Relay dlci configuration commands: auto Configure Automation class Assign a mapclass to a dlci default Set a command to its defaults exit Exit from FR dlci configuration mode load-interval Specify interval for load calculation for a dlci no Negate a command or set its defaults vofr Voice over Frame-Relay R1(config-fr-dlci)# *Mar 1 21:08:00.348: %ALIGN-3-SPURIOUS: Spurious memory access made at 0x804B0AD8 reading 0x8 R1(config-fr-dlci)#exit R1(config-subif)#exitfram interface-dlci 103  ? cisco Use CISCO Encapsulation ietf Use RFC1490/RFC2427 Encapsulation ppp Use RFC1973 Encapsulation to support PPP over FR protocol Optional protocol information for remote end R1(config-subif)#fram interface-dlci 103                         exit R1(config)#fram m      map-l clas fram whatefver    ver R1(config-map-class)#ser R1(config-map-class)#service-policy ? input input policy output output policy R1(config-map-class)#service-policy out ? WORD policy name R1(config-map-class)#service-policy out ProbAfte15 ? R1(config-map-class)#service-policy out ProbAfte15 R1(config-map-class)#exit R1(config)#int s 0/0.1 R1(config-subif)#int s 0/0.1exit service-policy out ProbAfte15 map-clas fram whatever exit fram interface-dlci 103 %PVC is already defined R1(config-fr-dlci)#class ? WORD map class name R1(config-fr-dlci)#class wqhateverhatever  R1(config-fr-dlci)#^Z R1# *Mar 1 21:09:14.934: %SYS-5-CONFIG_I: Configured from console by console R1#sh run Building configuration... Current configuration : 3242 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! logging queue-limit 100 logging buffered 4096 debugging ! memory-size iomem 10 ip subnet-zero ! ! no ip domain lookup ip dhcp excluded-address 180.40.7.129 180.40.7.144 ! ip dhcp pool yomomma network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 --More--   domain-name ccie.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! class-map match-all Telnet match access-group name Telnet --More--   class-map match-all FTP match access-group name FTP class-map match-all S5Telnet match access-group 100 class-map match-all SQL match access-group name SQL class-map match-all S5OtherStuff match access-group 101 ! ! policy-map Prob6 class S5Telnet bandwidth 1000 class S5OtherStuff police cir 5000000 conform-action transmit exceed-action set-prec-transmit 3 policy-map ProbAfte15 class Telnet police cir 56000 bc 1400 be 3500 conform-action set-prec-transmit 1 exceed-action set-prec-transmit 0 violate-action drop --More--   class FTP bandwidth 256 class class-default fair-queue queue-limit 100 policy-map Optional class FTP bandwidth percent 25 class Telnet bandwidth percent 25 class SQL priority 56 128 class class-default fair-queue queue-limit 512 ! ! ! ! interface Ethernet0/0 ip address 208.28.1.1 255.255.255.0 half-duplex ! --More--  interface Serial0/0 bandwidth 128 no ip address encapsulation frame-relay ! interface Serial0/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 103 class whatever ! interface Serial0/0.2 point-to-point bandwidth 128 ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay interface-dlci 102 protocol ip 180.40.7.162 class Prob7b ! interface Ethernet0/1 ip address 180.40.7.131 255.255.255.224 no ip proxy-arp service-policy output Optional --More--   half-duplex ! interface Serial0/1 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server ip classless ! ! ! ip access-list extended FTP permit tcp any any eq ftp-data permit tcp any any eq ftp ip access-list extended SQL permit tcp any host 87.23.11.123 eq 1433 permit udp any host 87.23.11.123 eq 1434 permit tcp any host 87.23.11.123 eq 1434 permit udp any host 87.23.11.123 eq 1433 --More--  ip access-list extended Telnet permit tcp any any eq telnet ! ! map-class frame-relay Prob7b frame-relay priority-group 1 ! map-class frame-relay whatever service-policy output ProbAfte15 access-list 100 permit tcp host 208.28.1.2 any eq telnet access-list 101 permit ip host 208.28.1.2 any priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! call rsvp-sync ! ! mgcp profile default ! dial-peer cor custom ! ! --More--   R1# R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#int      policy-map ProbAfte15 R1(config-pmap)# class class-default R1(config-pmap-c)# class class-defaultpolicy-map ProbAfte15n policy-map ProbAfte15o policy-map ProbAfte15 policy-map ProbAfte15 R1(config)#pol R1(config)#policy-map ProbAfte15 R1(config-pmap)#class FTP R1(config-pmap-c)#shape ? adaptive Enable Traffic Shaping adaptation to BECN average configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc only per interval fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fr-voice-adapt Enable rate adjustment depending on voice presence max-buffers Set Maximum Buffer Limit peak configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc+Be per interval R1(config-pmap-c)#shape aver 25    ? <8000-154400000> Target Bit Rate (bits per second), the value needs to be multiple of 8000 percent % of interface bandwidth for Committed information rate R1(config-pmap-c)#shape aver 256. 000 R1(config-pmap-c)#exit R1(config-pmap)#class Telenet    net R1(config-pmap-c)#shape aver 56000 R1(config-pmap-c)#exit R1(config-pmap)#class class-defaul;t  t R1(config-pmap-c)#shap R1(config-pmap-c)#shape avr er     R1(config-pmap-c)#shape average 512000 ? <256-154400000> bits per interval, sustained. Needs to be multiple of 128. Recommend not to configure it, the algorithm will find out the best value R1(config-pmap-c)#shape average 512000 R1(config-pmap-c)#shape peak ? <8000-154400000> Target Bit Rate (bits per second), the value needs to be multiple of 8000 percent % of interface bandwidth for Committed information rate R1(config-pmap-c)#shape peak 600000   000 R1(config-pmap-c)#do sh pol int s 0/0.1 R1(config-pmap-c)#int s 1 0/0.1 R1(config-subif)#serv out AfteProb15 % policy map AfteProb15 not configured R1(config-subif)#ProbAfte15sProbAfte15eProbAfte15rProbAfte15 ProbAfte15ProbAfte15 vProbAfte15 ProbAfte15oProbAfte15uProbAfte15tProbAfte15 ProbAfte15 R1(config-subif)#serv out ProbAfte15AfteProb15int s 0/0.1 do sh pol int s 0/0.1 Serial0/0.1 Service-policy output: ProbAfte15 Class-map: FTP (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name FTP Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 256000/256000 1984 7936 7936 31 992 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: Telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Telnet Traffic Shaping Target/Average Byte Sustain Excess Interval Increment --More--   Rate Limit bits/int bits/int (ms) (bytes) 56000/56000 1988 7952 7952 142 994 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 1200000/600000 3750 15000 15000 25 3750 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no R1(config-subif)#do s   sh u run Building configuration... Current configuration : 3119 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! logging queue-limit 100 logging buffered 4096 debugging ! memory-size iomem 10 ip subnet-zero ! ! no ip domain lookup ip dhcp excluded-address 180.40.7.129 180.40.7.144 ! ip dhcp pool yomomma network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 --More--   domain-name ccie.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! class-map match-all Telnet match access-group name Telnet --More--   class-map match-all FTP match access-group name FTP class-map match-all S5Telnet match access-group 100 class-map match-all SQL match access-group name SQL class-map match-all S5OtherStuff match access-group 101 ! ! policy-map Prob6 class S5Telnet bandwidth 1000 class S5OtherStuff police cir 5000000 conform-action transmit exceed-action set-prec-transmit 3 policy-map ProbAfte15 class FTP shape average 256000 class Telnet shape average 56000 class class-default --More--   shape peak 600000 policy-map Optional class FTP bandwidth percent 25 class Telnet bandwidth percent 25 class SQL priority 56 128 class class-default fair-queue queue-limit 512 ! ! ! ! interface Ethernet0/0 ip address 208.28.1.1 255.255.255.0 half-duplex ! interface Serial0/0 bandwidth 128 no ip address encapsulation frame-relay --More--   R1(config-subif)# policy-map ProbAfte15 R1(config-pmap)# class class-default R1(config-pmap-c)# class class-default ? QoS policy-map class configuration commands: bandwidth Bandwidth compression Activate Compression drop Drop all packets exit Exit from QoS class action configuration mode fair-queue Enable Flow-based Fair Queuing in this Class no Negate or set default values of a command police Police priority Strict Scheduling Priority for this Class queue-limit Queue Max Threshold for Tail Drop random-detect Enable Random Early Detection as drop policy service-policy Configure QoS Service Policy set Set QoS values shape Traffic Shaping R1(config-pmap-c)#shape ? adaptive Enable Traffic Shaping adaptation to BECN average configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc only per interval fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fr-voice-adapt Enable rate adjustment depending on voice presence max-buffers Set Maximum Buffer Limit peak configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc+Be per interval R1(config-pmap-c)#shape aver ? <8000-154400000> Target Bit Rate (bits per second), the value needs to be multiple of 8000 percent % of interface bandwidth for Committed information rate R1(config-pmap-c)#shape aver      aver 512000 ? <256-154400000> bits per interval, sustained. Needs to be multiple of 128. Recommend not to configure it, the algorithm will find out the best value R1(config-pmap-c)#shape aver 512000 600000 R1(config-pmap-c)#shape aver 512000 600000 class class-default policy-map ProbAfte15do sh run  Building configuration... Current configuration : 3129 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! logging queue-limit 100 logging buffered 4096 debugging ! memory-size iomem 10 ip subnet-zero ! ! no ip domain lookup ip dhcp excluded-address 180.40.7.129 180.40.7.144 ! ip dhcp pool yomomma network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 --More--   domain-name ccie.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! class-map match-all Telnet match access-group name Telnet --More--   class-map match-all FTP match access-group name FTP class-map match-all S5Telnet match access-group 100 class-map match-all SQL match access-group name SQL class-map match-all S5OtherStuff match access-group 101 ! ! policy-map Prob6 class S5Telnet bandwidth 1000 class S5OtherStuff police cir 5000000 conform-action transmit exceed-action set-prec-transmit 3 policy-map ProbAfte15 class FTP shape average 256000 class Telnet shape average 56000 class class-default --More--   shape average 512000 600000 policy-map Optional class FTP bandwidth percent 25 class Telnet bandwidth percent 25 class SQL priority 56 128 class class-default fair-queue queue-limit 512 ! ! ! ! interface Ethernet0/0 ip address 208.28.1.1 255.255.255.0 half-duplex ! interface Serial0/0 bandwidth 128 no ip address encapsulation frame-relay --More--  ! interface Serial0/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 service-policy output ProbAfte15 ip ospf network point-to-multipoint frame-relay interface-dlci 103 class whatever ! interface Serial0/0.2 point-to-point bandwidth 128 ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay interface-dlci 102 protocol ip 180.40.7.162 class Prob7b ! interface Ethernet0/1 ip address 180.40.7.131 255.255.255.224 no ip proxy-arp service-policy output Optional half-duplex ! interface Serial0/1 --More--   R1(config-pmap-c)#do sh runshape aver 512000 600000 class class-default shape aver 512000 600000 class class-default policy-map ProbAfte15do sh run pol int s 0/0.1 Serial0/0.1 Service-policy output: ProbAfte15 Class-map: FTP (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name FTP Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 256000/256000 1984 7936 7936 31 992 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: Telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Telnet Traffic Shaping Target/Average Byte Sustain Excess Interval Increment --More--   Rate Limit bits/int bits/int (ms) (bytes) 56000/56000 1988 7952 7952 142 994 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: class-default (match-any) 8 packets, 1256 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 512000/512000 150000 600000 600000 1171 75000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 8 1256 0 0 no R1(config-pmap-c)#do sh pol int s 0/0.1run shape aver 512000 600000      300000 ? <0-154400000> bits per interval, excess. Needs to be multiple of 128. Bc will be used if you don't configure it. R1(config-pmap-c)#shape aver 512000 300000 R1(config-pmap-c)#shape aver 512000 300000 do sh pol int s 0/0.1 run shape aver 512000 600000 class class-default shape aver 512000 600000do sh run pol int s 0/0.1 Serial0/0.1 Service-policy output: ProbAfte15 Class-map: FTP (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name FTP Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 256000/256000 1984 7936 7936 31 992 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: Telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Telnet Traffic Shaping Target/Average Byte Sustain Excess Interval Increment --More--   Rate Limit bits/int bits/int (ms) (bytes) 56000/56000 1988 7952 7952 142 994 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: class-default (match-any) 24 packets, 3934 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 512000/512000 75000 300000 300000 585 37500 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 24 3934 0 0 no R1(config-pmap-c)# ^Z R1# *Mar 1 21:25:43.579: %SYS-5-CONFIG_I: Configured from console by console R1#sh run Building configuration... Current configuration : 3129 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R1 ! logging queue-limit 100 logging buffered 4096 debugging ! memory-size iomem 10 ip subnet-zero ! ! no ip domain lookup ip dhcp excluded-address 180.40.7.129 180.40.7.144 ! ip dhcp pool yomomma network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 --More--   domain-name ccie.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! mpls ldp logging neighbor-changes ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! class-map match-all Telnet match access-group name Telnet --More--   class-map match-all FTP match access-group name FTP class-map match-all S5Telnet match access-group 100 class-map match-all SQL match access-group name SQL class-map match-all S5OtherStuff match access-group 101 ! ! policy-map Prob6 class S5Telnet bandwidth 1000 class S5OtherStuff police cir 5000000 conform-action transmit exceed-action set-prec-transmit 3 policy-map ProbAfte15 class FTP shape average 256000 class Telnet shape average 56000 class class-default --More--   shape average 512000 300000 policy-map Optional class FTP bandwidth percent 25 class Telnet bandwidth percent 25 class SQL priority 56 128 class class-default fair-queue queue-limit 512 ! ! ! ! interface Ethernet0/0 ip address 208.28.1.1 255.255.255.0 half-duplex ! interface Serial0/0 bandwidth 128 no ip address encapsulation frame-relay --More--   R1# RACK18AS>2 [Resuming connection 2 to r2 ... ] R2#sh run Building configuration... Current configuration : 1808 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R2 ! logging queue-limit 100 ! ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 mpls ldp logging neighbor-changes ! ! ! --More--  ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto --More--  ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 20.10.1.1 255.255.255.0 ip helper-address 208.28.1.99 duplex auto speed auto ! interface Serial1/0 no ip address encapsulation frame-relay no fair-queue ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint traffic-shape rate 64000 8000 8000 1000 traffic-shape adaptive 32000 frame-relay interface-dlci 203 ! --More--  interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 201 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 clockrate 64000 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address --More--   R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0 R2(config-if)#no    int s 1/0.2 R2(config-subif)#traf R2(config-subif)#traffic-shape ? adaptive Enable Traffic Shaping adaptation to BECN fecn-adapt Enable Traffic Shaping reflection of FECN as BECN group configure token bucket: group CIR (bps) [Bc (bits) [Be (bits)]] rate configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]] R2(config-subif)#traffic-shape rate ? <8000-100000000> Target Bit Rate (bits per second) R2(config-subif)#traffic-shape rate 64000 ? <0-100000000> bits per interval, sustained R2(config-subif)#traffic-shape rate 64000 640 ? <0-100000000> bits per interval, excess in first interval R2(config-subif)#traffic-shape rate 64000 640 less than 1000 bits in an interval doesn't make sense R2(config-subif)#traffic-shape rate 64000 640     1800 R2(config-subif)#exit R2(config)#do ac  sh access-list R2(config)#access-list 100 per ? <0-255> An IP protocol number ahp Authentication Header Protocol eigrp Cisco's EIGRP routing protocol esp Encapsulation Security Payload gre Cisco's GRE tunneling icmp Internet Control Message Protocol igmp Internet Gateway Message Protocol ip Any Internet Protocol ipinip IP in IP tunneling nos KA9Q NOS compatible IP over IP tunneling ospf OSPF routing protocol pcp Payload Compression Protocol pim Protocol Independent Multicast tcp Transmission Control Protocol udp User Datagram Protocol R2(config)#access-list 100 per ospf ? A.B.C.D Source address any Any source host host A single source host R2(config)#access-list 100 per ospf any any R2(config)#fram R2(config)#frame-relay ? address Address Registration with neighbor de-list Build a classification list to be used in setting the DE bit switching enable frame relay pvc switching R2(config)#frame-relay de-list >? % Unrecognized command R2(config)#frame-relay de-list >   ? <1-10> DE list numbers R2(config)#frame-relay de-list 1 ? interface Identify packets from a named interface protocol Identify packets by protocol R2(config)#frame-relay de-list 1 pro R2(config)#frame-relay de-list 1 protocol ? appletalk AppleTalk arp IP ARP bridge Bridging clns ISO CLNS clns_es ISO CLNS End System clns_is ISO CLNS Intermediate System compressedtcp Compressed TCP decnet DECnet decnet_node DECnet Node decnet_router-l1 DECnet Router L1 decnet_router-l2 DECnet Router L2 ip IP ipx Novell IPX R2(config)#frame-relay de-list 1 protocol ip ? fragments Classify fragmented IP packets gt Identify packets greater than a specified size list To specify an access list lt Identify packets less than a specified size tcp Classify TCP packets 'to' or 'from' the specified port udp Classify UDP packets 'to' or 'from' the specified port R2(config)#frame-relay de-list 1 protocol ip list ? <1-199> IP access list <1300-2699> IP access list R2(config)#frame-relay de-list 1 protocol ip list 100 ? R2(config)#frame-relay de-list 1 protocol ip list 100 R2(config)#int s 1/0.2 R2(config-subif)#fram ? class Define a map class on the interface de-group Associate a DE group with a DLCI interface-dlci Define a DLCI on an interface/subinterface inverse-arp Enable/disable FR inverse ARP ip Frame Relay Internet Protocol config commands map Map a protocol address to a DLCI address payload-compression Use payload compression priority-dlci-group Define a priority group of DLCIs vc-bundle configure a frame-relay vc-bundle R2(config-subif)#fram de   R2(config-subif)#fram de-group ? <1-10> DE group number R2(config-subif)#fram de-group 1 ? <16-1007> DLCI value R2(config-subif)#fram de-group 1 1 201 ? R2(config-subif)#fram de-group 1 201 R2(config-subif)#^Z R2# *Mar 1 21:29:17.153: %SYS-5-CONFIG_I: Configured from console by console R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#access-list fram de-group 1 201 access-list naccess-list oaccess-list  access-list access-list 100 R2(config)#access-list 100 den ospf   any any R2(config)#access-list 100 per ip any any R2(config)#^Z R2# *Mar 1 21:30:00.212: %SYS-5-CONFIG_I: Configured from console by console R2#sh run Building configuration... Current configuration : 1990 bytes ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R2 ! logging queue-limit 100 ! ip subnet-zero ! ! no ip domain lookup ! ip audit notify log ip audit po max-events 100 mpls ldp logging neighbor-changes frame-relay de-list 1 protocol ip list 100 ! ! --More--  ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! mta receive maximum-recipients 0 ! ! ! ! interface FastEthernet0/0 no ip address shutdown duplex auto --More--   speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 20.10.1.1 255.255.255.0 ip helper-address 208.28.1.99 duplex auto speed auto ! interface Serial1/0 no ip address encapsulation frame-relay no fair-queue ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint traffic-shape rate 64000 8000 8000 1000 traffic-shape adaptive 32000 frame-relay interface-dlci 203 --More--  ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint traffic-shape rate 64000 1800 1800 1000 frame-relay de-group 1 201 frame-relay interface-dlci 201 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 clockrate 64000 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown --More--  ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! no ip http server no ip http secure-server ip classless ! ! ! --More--  access-list 100 deny ospf any any access-list 100 permit ip any any ! ! call rsvp-sync ! ! mgcp profile default ! ! ! dial-peer cor custom ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 --More--   no login ! ! end R2# R2# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#wr Building configuration... [OK] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s 0 1/0 R3(config-if)#fram ? accounting Special accounting instruction address-reg ELMI address registration broadcast-queue Define a broadcast queue and transmit rate class Define a map class on the interface congestion-management Enable Frame Relay congestion management de-group Associate a DE group with a DLCI fragment Enable end-to-end fragmentation for all PVCs fragmentation Adaptive fragmentation interface-dlci Define a DLCI on an interface/subinterface interface-queue configure PVC interface queueing intf-type Configure a FR DTE/DCE/NNI interface inverse-arp Enable/disable FR inverse ARP ip Frame Relay Internet Protocol config commands lapf set LAPF parameter lmi-n391dte set full status polling counter lmi-n392dce LMI error threshold lmi-n392dte LMI error threshold lmi-n393dce set LMI monitored event count lmi-n393dte set LMI monitored event count lmi-t392dce set DCE polling verification timer lmi-type Use CISCO-ANSI-CCITT type LMI local-dlci Set source DLCI when LMI is not supported --More--   map Map a protocol address to a DLCI address multicast-dlci Set DLCI of a multicast group policing Enable Frame Relay policing priority-dlci-group Define a priority group of DLCIs qos-autosense enable QOS autosense route frame relay route for pvc switching svc Enable frame relay SVCs traffic-shaping Enable Frame Relay Traffic Shaping traps-maximum set max traps FR generates at link up or when getting LMI Full Status message vc-bundle configure a frame-relay vc-bundle R3(config-if)#fram ip ? rtp RTP header compression parameters tcp TCP header compression parameters R3(config-if)#fram ip tcp ? compression-connections Maximum number of compressed TCP connections header-compression Enable TCP/IP header compression R3(config-if)#fram ip tcp he R3(config-if)#fram ip tcp header-compression ? passive Compress for destinations sending compressed headers R3(config-if)#fram ip tcp header-compression R3(config-if)#fram ip tcp header-compression  tcp header-compression  header-compression  header-compression r header-compression t header-compression p header-compression  R3(config-if)#fram ip ? rtp RTP header compression parameters tcp TCP header compression parameters R3(config-if)#fram ip tcp ? compression-connections Maximum number of compressed TCP connections header-compression Enable TCP/IP header compression R3(config-if)#fram ip tcp c R3(config-if)#fram ip tcp compression-connections ? <3-256> Number of TCP connections R3(config-if)#fram ip tcp compression-connections 20 R3(config-if)#fram ip tcp compression-connections 20rtp header-compression tcp compression-connections 20p compression-connections 20 ttp compression-connections 20p compression-connections 20 rtp compression-connections 20 R3(config-if)#do sh run int s 1/0 Building configuration... Current configuration : 395 bytes ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network point-to-multipoint frame-relay map ip 180.40.7.65 301 broadcast frame-relay map ip 180.40.7.67 302 broadcast frame-relay ip tcp header-compression frame-relay ip tcp compression-connections 20 frame-relay ip rtp header-compression frame-relay ip rtp compression-connections 20 end R3(config-if)# R3# *Mar 1 21:36:48.521: %SYS-5-CONFIG_I: Configured from console by console R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s 1/0 R3(config-if)#frame-relay ip tcp header-compression pass R3(config-if)#frame-relay ip tcp header-compression passive R3(config-if)#frame-relay ip tcp header-compression passive p header-compression passive rtp header-compression passive  R3(config-if)#fram oi  ip tcp co R3(config-if)#fram ip tcp compression-connections 20 R3(config-if)#^Z R3# *Mar 1 21:37:30.005: %SYS-5-CONFIG_I: Configured from console by console R3#sh run int s 1/0 Building configuration... Current configuration : 364 bytes ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network point-to-multipoint frame-relay map ip 180.40.7.65 301 broadcast frame-relay map ip 180.40.7.67 302 broadcast frame-relay ip tcp header-compression passive frame-relay ip tcp compression-connections 20 frame-relay ip rtp header-compression passive end R3#cop  onfig t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s 1/0 R3(config-if)#int s 1/0fram ip tcp compression-connections 20p compression-connections 20  rtp compression-connections 20\tp compression-connections 20 ^ % Invalid input detected at '^' marker. R3(config-if)#fram ip r\tp compression-connections 20tp compression-connections 20  R3(config-if)#^Z R3# *Mar 1 21:38:16.281: %SYS-5-CONFIG_I: Configured from console by console R3# R3# R3# R3# R3#