But the priority group is looked at for both PVCs

R7#sh run | b interface Serial1/0
interface Serial1/0
 no ip address
 encapsulation frame-relay
 priority-group 1
!
interface Serial1/0.1 point-to-point
 ip address 180.40.7.65 255.255.255.224
 ip ospf network broadcast
 ip ospf priority 0
 frame-relay interface-dlci 703
 frame-relay ip tcp header-compression passive
!
interface Serial1/0.2 point-to-point
 ip address 180.40.7.161 255.255.255.224
 ip ospf network point-to-multipoint
 frame-relay interface-dlci 702
!

!
access-list 1 permit 208.28.1.2
priority-list 1 protocol ip high tcp telnet
priority-list 1 protocol ip low tcp www