=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2006.07.12 11:47:29 =~=~=~=~=~=~=~=~=~=~=~= RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 180.40.7.130 YES manual up up ATM1/0 unassigned YES unset administratively down down R4#confi gt ^ % Invalid input detected at '^' marker. R4#in  cio  onfig t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int lo 0 R4(config-if)#ip add 100.1.1.1 1 255.255.255.0 R4(config-if)#^Z R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#access-list 100 per icmp host 100.c1.1.     11.11    .1.1 20.109 .1.2h20.10.1.2o20.10.1.2s20.10.1.2t20.10.1.2 20.10.1.220.10.1.2 echo R3(config)#access-list 100 per icmp host 100.1.1.1 host 20.10.1.2 echo-e R3(config)#access-list 100 per icmp host 100.1.1.1 host 20.10.1.2 echo-e r R3(config)#access-list 100 per icmp host 100.1.1.1 host 20.10.1.2 echo-reply R3(config)#access-list 100 per icmp host 100.1.1.1 host 20.10.1.2 echo-reply   echo 1 echo per icmp host 100.1.1.1 host 20.10.1.1 echo 1 per icmp host 100.1.1.1 host 20.10.1.1 echo R3(config)#access-list 101 per icmp host 100.1.1.1 host 20.10.1.1 echo-r R3(config)#access-list 101 per icmp host 100.1.1.1 host 20.10.1.1 echo-r echo-r 0 echo-r echo-r0 echo-r. echo-r0 echo-r. echo-r0 echo-r. echo-r2 echo$5 ech5 ec20.10.1.0 0.0.0.255 ech20.10.1.0 0.0.0.255 echo20.10.1.0 0.0.0.255 echo-r20.10.1.0 0.0.0.255 echo-r 20.10.1.0 0.0.0.255 echo-r  per icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo-r 2 per icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo-r R3(config)#access-list 102 per icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo-r   R3(config)#router -map Probv b 1 R3(config-route-map)#matchg    ip add 102 R3(config-route-map)#match len R3(config-route-map)#match length ? <0-2147483647> Minimum packet length R3(config-route-map)#match length 1001 ? <0-2147483647> Maximum packet length R3(config-route-map)#match length 1001 2147483647 R3(config-route-map)#\ set ? as-path Prepend string for a BGP AS-path attribute automatic-tag Automatically compute TAG value clns OSI summary address comm-list set BGP community list (for deletion) community BGP community attribute dampening Set BGP route flap dampening parameters default Set default information extcommunity BGP extended community attribute interface Output interface ip IP specific information ipv6 IPv6 specific information level Where to import route local-preference BGP local preference path attribute metric Metric value for destination routing protocol metric-type Type of metric for destination routing protocol mpls-label Set MPLS label for prefix nlri BGP NLRI type origin BGP origin code tag Tag value for destination routing protocol traffic-index BGP traffic classification number for accounting weight BGP weight for routing table R3(config-route-map)#set in R3(config-route-map)#set interface ? Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Null Null interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-Template Virtual Template interface Virtual-TokenRing Virtual TokenRing R3(config-route-map)#set interface ser 1/2 R3(config-route-map)#set interface ser 1/2match length 1001 2147483647ip add 102 route-map Prob1  20 R3(config-route-map)#mroute-map Prob1 20set interface ser 1/2match length 1001 2147483647ip add 102  0 R3(config-route-map)#match ip add 100route-map Prob1 20set interface ser 1/2                   ho R3(config-route-map)#set ho  n R3(config-route-map)#set nlri      ip n R3(config-route-map)#set ip next-hop 180.40..7  . 7.67 R3(config-route-map)#set ip next-hop 180.40.7.67match ip add 100 route-map Prob1 20  30 R3(config-route-map)#route-map Prob1 30set ip next-hop 180.40.7.67match ip add 100  1 R3(config-route-map)#match ip add 101route-map Prob1 30set ip next-hop 180.40.7.67  2 R3(config-route-map)#do sh route-map route-map Prob1, permit, sequence 10 Match clauses: ip address (access-lists): 102 length 1001 2147483647 Set clauses: interface Serial1/2 Policy routing matches: 0 packets, 0 bytes route-map Prob1, permit, sequence 20 Match clauses: ip address (access-lists): 100 Set clauses: ip next-hop 180.40.7.67 Policy routing matches: 0 packets, 0 bytes route-map Prob1, permit, sequence 30 Match clauses: ip address (access-lists): 101 Set clauses: ip next-hop 180.40.7.2 Policy routing matches: 0 packets, 0 bytes R3(config-route-map)#int fa 0/0 R3(config-if)#ip rout R3(config-if)#ip route     oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo$ooooooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooo ooooooooo ooooooooo ooooooooo ooooooooo ooooooooo ooooooooo oooooo  ip ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ^ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo % Invalid input detected at '^' marker. R3(config-if)#ip pol R3(config-if)#ip policy rou R3(config-if)#ip policy route-map Prob1 R3(config-if)#^Z R3# *Mar 2 00:46:39.802: %SYS-5-CONFIG_I: Configured from console by console R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#logg % Incomplete command. R3(config)#logg buff R3(config)#^Z R3#cl *Mar 2 00:46:48.781: %SYS-5-CONFIG_I: Configured from console by console R3#clea log Clear logging buffer [confirm] R3# R3#deb ip pgp  ol Policy routing debugging is on R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] *M R4#ping 20.10.1.1 sou 100.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 60/60/60 ms R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh log Syslog logging: enabled (9 messages dropped, 2 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 50 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 1 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 56 message lines logged --More--   Log Buffer (4096 bytes): R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/793] via 180.40.7.131, 00:20:24, FastEthernet0/0 [110/793] via 180.40.7.129, 00:20:24, FastEthernet0/0 O 20.10.1.0 [110/783] via 180.40.7.131, 00:20:24, FastEthernet0/0 [110/783] via 180.40.7.129, 00:20:24, FastEthernet0/0 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:20:24, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/782] via 180.40.7.131, 00:20:25, FastEthernet0/0 [110/782] via 180.40.7.129, 00:20:25, FastEthernet0/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:20:25, FastEthernet0/0 --More--   R4# RACK9AS>7 [Resuming connection 7 to r7 ... ] R7#confi gt ^ % Invalid input detected at '^' marker. R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s/0  0 1/0.1 2 R7(config-subif)#ip ospf cost 1200000 ^ % Invalid input detected at '^' marker. R7(config-subif)#ip ospf cost 1200000    R7(config-subif)#\^Z ^ % Invalid input detected at '^' marker. R7# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/793] via 180.40.7.129, 00:00:00, FastEthernet0/0 O 20.10.1.0 [110/783] via 180.40.7.129, 00:00:00, FastEthernet0/0 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:00:00, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/782] via 180.40.7.129, 00:00:01, FastEthernet0/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:00:01, FastEthernet0/0 O 180.40.7.0/27 [110/782] via 180.40.7.129, 00:00:01, FastEthernet0/0 O 180.40.7.67/32 [110/782] via 180.40.7.129, 00:00:01, FastEthernet0/0 O 180.40.7.66/32 [110/1] via 180.40.7.129, 00:00:01, FastEthernet0/0 --More--  O 180.40.7.65/32 [110/1] via 180.40.7.131, 00:00:01, FastEthernet0/0 R4# $          R4#sh ip routeping 20.10.1.1 sou 100.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 48/48/48 ms R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Ma0:48:57.431: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, FIB policy match *Mar 2 00:48:57.431: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, g=180.40.7.2, len 100, FIB policy routed *Mar 2 00:48:57.480: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, FIB policy match *Mar 2 00:48:57.480: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, g=180.40.7.2, len 100, FIB policy routed R3# R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#no ip cef R3(config)#^Z R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] ping 20.10.1.1 sou 100.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 48/50/52 ms R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Mar (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 2 00:49:23.454: IP: route map Prob1, item 30, permit *Mar 2 00:49:23.454: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy routed *Mar 2 00:49:23.454: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 2 00:49:23.502: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 2 00:49:23.502: IP: route map Prob1, item 30, permit *Mar 2 00:49:23.502: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy routed *Mar 2 00:49:23.502: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 2 00:49:23.55 R3#0: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 2 00:49:23.550: IP: route map Prob1, item 30, permit *Mar 2 00:49:23.550: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy routed *Mar 2 00:49:23.550: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 2 00:49:23.606: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 2 00:49:23.606: IP: route map Prob1, item 30, permit *Mar 2 00:49:23.606: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy routed *Mar 2 00:49:23.606: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip cef R3(config)# *Mar 2 00:49:40.250: PR-RP: Set FastEthernet0/0 policy_routemap=Prob1; cached_map=Prob1 *Mar 2 00:49:40.270: PR-RP: Set FastEthernet0/0 policy_routemap=Prob1; cached_map=Prob1 R3(config)#^Z R3# *Mar 2 00:49:43.864: %SYS-5-CONFIG_I: Configured from console by console R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#ping 20.10.1.1 sou 100.1.1.1 sou 100.1.1.1 2 sou 100.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 48/49/52 ms R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Mar *Mar 2 00:49:54.629: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:49:54.629: IP: route map Prob1, item 20, permit *Mar 2 00:49:54.629: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:49:54.629: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 2 00:49:54.677: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:49:54.677: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:49:54.677: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:49:54.677: IP: route map Prob1, item 20, permit *Mar 2 00:49:54.681: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:49:54.681: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 2 00:49:54.725: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:49:54.729: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:49:54.729: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:49:54.729: IP: route map Prob1, item 20, permit *Mar 2 00:49:54.729: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:49:54.729: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 R3# R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#ping 20.10.1.2 sou 100.1.1.11 sou 100.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round- RACK9AS>23  3 [Resuming connection 3 to r3 ... ] * R3#sh log Syslog logging: enabled (9 messages dropped, 2 messages rate-limited, 0 flushes, 0 overruns, xml disabled) Console logging: level debugging, 189 messages logged, xml disabled Monitor logging: level debugging, 0 messages logged, xml disabled Buffer logging: level debugging, 140 messages logged, xml disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 58 message lines logged --More--   Log Buffer (4096 bytes): 00:49:23.606: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, policy match *Mar 2 00:49:23.606: IP: route map Prob1, item 30, permit *Mar 2 00:49:23.606: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1 (Serial1/2), len 100, policy routed *Mar 2 00:49:23.606: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 2 00:49:40.250: PR-RP: Set FastEthernet0/0 policy_routemap=Prob1; cached_map=Prob1 *Mar 2 00:49:40.270: PR-RP: Set FastEthernet0/0 policy_routemap=Prob1; cached_map=Prob1 *Mar 2 00:49:43.864: %SYS-5-CONFIG_I: Configured from console by console *Mar 2 00:49:54.525: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:49:54.529: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:49:54.529: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:49:54.529: IP: route map Prob1, item 20, permit *Mar 2 00:49:54.529: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:49:54.529: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 2 00:49:54.577: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match --More--  *Mar 2 00:49:54.577: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:49:54.577: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:49:54.577: IP: route map Prob1, item 20, permit *Mar 2 00:49:54.581: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:49:54.581: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 2 00:49:54.625: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:49:54.629: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:49:54.629: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:49:54.629: IP: route map Prob1, item 20, permit *Mar 2 00:49:54.629: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:49:54.629: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 2 00:49:54.677: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:49:54.677: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:49:54.677: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:49:54.677: IP: route map Prob1, item 20, permit *Mar 2 00:49:54.681: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed --More--  *Mar 2 00:49:54.681: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 2 00:49:54.725: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:49:54.729: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:49:54.729: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:49:54.729: IP: route map Prob1, item 20, permit *Mar 2 00:49:54.729: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:49:54.729: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 2 00:50:09.942: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, FIB policy match *Mar 2 00:50:09.942: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, g=180.40.7.2, len 100, FIB policy routed *Mar 2 00:50:09.990: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, FIB policy match *Mar 2 00:50:09.990: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, g=180.40.7.2, len 100, FIB policy routed *Mar 2 00:50:10.071: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, FIB policy match *Mar 2 00:50:10.071: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, g=180.40.7.2, len 100, FIB policy routed *Mar 2 00:50:10.119: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, FIB policy match --More--  *Mar 2 00:50:10.119: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, g=180.40.7.2, len 100, FIB policy routed *Mar 2 00:50:10.167: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, FIB policy match *Mar 2 00:50:10.167: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, g=180.40.7.2, len 100, FIB policy routed R3#       RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#ping 20.10.1.1 sou 100.1.1.1 l   12 sou 100.1.1.1 len 1400 ^ % Invalid input detected at '^' marker. R4#ping 20.10.1.2 sou 100.1.1.1 len 1400        ? data specify data pattern df-bit enable do not fragment bit in IP header repeat specify repeat count size specify datagram size timeout specify timeout interval validate validate reply data R4#ping 20.10.1.2 sou 100.1.1.1 si 1400 Type escape sequence to abort. Sending 5, 1400-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 ! RACK9AS>3 [Resuming connection 3 to r3 ... ] R3# *Mar 2 00:50:54.752: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, FIB policy match *Mar 2 00:50:54.752: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, FIB policy routed *Mar 2 00:50:55.112: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, FIB policy match *Mar 2 00:50:55.112: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, FIB policy routed *Mar 2 00:50:55.473: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, FIB policy match *Mar 2 00:50:55.473: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, FIB policy routed R3# *Mar 2 00:50:55.834: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, FIB policy match *Mar 2 00:50:55.834: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, FIB policy routed *Mar 2 00:50:56.194: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, FIB policy match *Mar 2 00:50:56.194: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, FIB policy routed R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip    no ip cef R3(config)# RACK9AS>4 [Resuming connection 4 to r4 ... ] !! R4#ping 20.10.1.2 sou 100.1.1.1 si 1400 Type escape sequence to abort. Sending 5, 1400-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 ! RACK9AS>3 [Resuming connection 3 to r3 ... ] R3(config)# *Mar 2 00:51:15.674: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, policy match *Mar 2 00:51:15.674: IP: route map Prob1, item 10, permit *Mar 2 00:51:15.674: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, policy routed *Mar 2 00:51:15.674: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 2 00:51:16.035: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, policy match *Mar 2 00:51:16.039: IP: route map Prob1, item 10, permit *Mar 2 00:51:16.039: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, policy routed *Mar 2 00:51:16.039: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 2 00:51:16.399: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, policy match *Mar 2 00:51:16.399: IP: route map Prob1, item 10, permit *Mar 2 00:51:16.399: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, policy routed *Mar 2 00:51:16.399: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 2 00:51 R3(config)#:16.760: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, policy match *Mar 2 00:51:16.764: IP: route map Prob1, item 10, permit *Mar 2 00:51:16.764: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, policy routed *Mar 2 00:51:16.764: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 2 00:51:17.124: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, policy match *Mar 2 00:51:17.124: IP: route map Prob1, item 10, permit *Mar 2 00:51:17.124: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, policy routed *Mar 2 00:51:17.124: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 R3(config)#ip cef R3(config)# RACK9AS>343434343 4 [Resuming connection 4 to r4 ... ] !! R4#ping 20.10.1.2 sou 100.1.1.1 si 1400                      Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 32/32/32 ms R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] *M2, len 100, FIB policy rejected(no match) - normal forwarding *Mar 2 00:51:36.264: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected(no match) - normal forwarding *Mar 2 00:51:36.296: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected(no match) - normal forwarding R3(config)# R3(config)#ip cef route-map Prob1 40 R3(config-route-map)#^Z R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] ping 20.10.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 32/32/36 ms R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Ma0, FIB policy rejected - normal forwarding R3# *Mar 2 00:51:57.787: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:51:57.791: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding *Mar 2 00:51:57.823: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:51:57.823: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#route-map Prob1 40broute-map Prob1 40nroute-map Prob1 40route-map Prob1 40 route-map Prob1 40 nroute-map Prob1 40oroute-map Prob1 40 route-map Prob1 40 R3(config)#^Z R3# *Mar 2 00:52:23.585: %SYS-5-CONFIG_I: Configured from console by console R3#sh run | b 0/0 interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network point-to-multipoint frame-relay map ip 180.40.7.65 307 broadcast frame-relay map ip 180.40.7.67 302 broadcast ! --More--  interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! --More--  interface Serial1/7 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ! no ip http server no ip http secure-server ! access-list 100 permit icmp host 100.1.1.1 host 20.10.1.2 echo access-list 100 permit icmp host 100.1.1.1 host 20.10.1.2 echo-reply access-list 101 permit icmp host 100.1.1.1 host 20.10.1.1 echo access-list 101 permit icmp host 100.1.1.1 host 20.10.1.1 echo-reply access-list 102 permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo-reply access-list 102 permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo ! route-map Prob1 permit 10 match ip address 102 match length 1001 2147483647 --More--   set interface Serial1/2 ! route-map Prob1 permit 20 match ip address 100 set ip next-hop 180.40.7.67 ! route-map Prob1 permit 30 match ip address 101 set ip next-hop 180.40.7.2 ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 --More--   R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#sh run int lo 0 Building configuration... Current configuration : 63 bytes ! interface Loopback0 ip address 100.1.1.1 255.255.255.0 end R4# R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh access-list Extended IP access list 100 10 permit icmp host 100.1.1.1 host 20.10.1.2 echo (10 matches) 20 permit icmp host 100.1.1.1 host 20.10.1.2 echo-reply Extended IP access list 101 10 permit icmp host 100.1.1.1 host 20.10.1.1 echo (15 matches) 20 permit icmp host 100.1.1.1 host 20.10.1.1 echo-reply Extended IP access list 102 10 permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo-reply 20 permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo (35 matches) R3# RACK9AS>6 [Resuming connection 6 to r6 ... ] S6#sh ip int brie Interface IP-Address OK? Method Status Protocol Vlan1 unassigned YES unset administratively down down FastEthernet0/1 20.10.2.1 YES manual up up FastEthernet0/2 20.10.1.2 YES manual up up FastEthernet0/3 unassigned YES unset down down FastEthernet0/4 unassigned YES unset up up FastEthernet0/5 unassigned YES unset down down FastEthernet0/6 unassigned YES unset down down FastEthernet0/7 unassigned YES unset up up FastEthernet0/8 unassigned YES unset down down FastEthernet0/9 unassigned YES unset down down FastEthernet0/10 unassigned YES unset down down FastEthernet0/11 unassigned YES unset down down FastEthernet0/12 unassigned YES unset down down FastEthernet0/13 unassigned YES unset down down FastEthernet0/14 unassigned YES unset down down FastEthernet0/15 unassigned YES unset down down FastEthernet0/16 unassigned YES unset down down FastEthernet0/17 unassigned YES unset down down FastEthernet0/18 unassigned YES unset down down FastEthernet0/19 unassigned YES unset down down FastEthernet0/20 unassigned YES unset down down FastEthernet0/21 unassigned YES unset down down --More--   S6#ping 100.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 100.1.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 48/49/52 ms S6# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Maar 2 00:54:51.852: IP: route map Prob1, item 20, permit *Mar 2 00:54:51.852: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:54:51.852: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 R3# R3#sh access-list Extended IP access list 100 10 permit icmp host 100.1.1.1 host 20.10.1.2 echo (10 matches) 20 permit icmp host 100.1.1.1 host 20.10.1.2 echo-reply (10 matches) Extended IP access list 101 10 permit icmp host 100.1.1.1 host 20.10.1.1 echo (15 matches) 20 permit icmp host 100.1.1.1 host 20.10.1.1 echo-reply Extended IP access list 102 10 permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo-reply (10 matches) 20 permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo (35 matches) R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#access-list 100 per icmp any any ec R4(config)#access-list 100 per icmp any any echo R4(config)#access-list 100 per icmp any any echo-r R4(config)#access-list 100 per icmp any any echo-reply R4(config)#route map Prob2 ^ % Invalid input detected at '^' marker. R4(config)#route map Prob2 map Prob2 -map Prob2 R4(config-route-map)#match ip add 100 R4(config-route-map)#set ip n ne R4(config-route-map)#set ip next-hop 180.40.7.129 R4(config-route-map)#set ip next-hop 180.40.7.129match ip add 100 route-map Prob2                  exit R4(config)#ip lo R4(config)#ip local ? policy Enable policy routing pool IP Local address pool lists R4(config)#ip local pol R4(config)#ip local policy ? route-map Policy route map R4(config)#ip local policy rou ? WORD Route map name R4(config)#ip local policy rou Prob2 R4(config)#^Z R4#deb ip *Mar 2 01:00:10.229: %SYS-5-CONFIG_I: Configured from console by console R4#deb ip pol Policy routing debugging is on R4#pindeb ip polconfig t sh run int lo 0ping 20.10.1.2 sou 100.1.1.1 si 1400  Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: !!! *Mar 2 01:00:17.073: IP: s=180.40.7.130 (local), d=20.10.1.2, len 100, policy match *Mar 2 01:00:17.073: IP: route map Prob2, item 10, permit *Mar 2 01:00:17.077: IP: s=180.40.7.130 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 01:00:17.077: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 01:00:17.109: IP: s=180.40.7.130 (local), d=20.10.1.2, len 100, policy match *Mar 2 01:00:17.109: IP: route map Prob2, item 10, permit *Mar 2 01:00:17.109: IP: s=180.40.7.130 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 01:00:17.109: IP: local to FastEthernet0/0 180.40.7.129!! Success rate is 100 percent (5/5), round-trip min/avg/max = 32/34/36 ms R4# *Mar 2 01:00:17.145: IP: s=180.40.7.130 (local), d=20.10.1.2, len 100, policy match *Mar 2 01:00:17.145: IP: route map Prob2, item 10, permit *Mar 2 01:00:17.145: IP: s=180.40.7.130 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 01:00:17.145: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 01:00:17.181: IP: s=180.40.7.130 (local), d=20.10.1.2, len 100, policy match *Mar 2 01:00:17.181: IP: route map Prob2, item 10, permit *Mar 2 01:00:17.181: IP: s=180.40.7.130 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 01:00:17.181: IP: local to FastEthernet0/0 180.40.7.129 R4# *Mar 2 01:00:17.213: IP: s=180.40.7.130 (local), d=20.10.1.2, len 100, policy match *Mar 2 01:00:17.217: IP: route map Prob2, item 10, permit *Mar 2 01:00:17.217: IP: s=180.40.7.130 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 01:00:17.217: IP: local to FastEthernet0/0 180.40.7.129 R4#ping 20.10.1.2 deb ip pol config t sh run int lo 0ping 20.10.1.2 sou 100.1.1.1 si 1400 Type escape sequence to abort. Sending 5, 1400-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !! *Mar 2 01:00:30.369: IP: s=100.1.1.1 (local), d=20.10.1.2, len 1400, policy match *Mar 2 01:00:30.369: IP: route map Prob2, item 10, permit *Mar 2 01:00:30.369: IP: s=100.1.1.1 (local), d=20.10.1.2 (FastEthernet0/0), len 1400, policy routed *Mar 2 01:00:30.373: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 01:00:30.733: IP: s=100.1.1.1 (local), d=20.10.1.2, len 1400, policy match *Mar 2 01:00:30.733: IP: route map Prob2, item 10, permit *Mar 2 01:00:30.733: IP: s=100.1.1.1 (local), d=20.10.1.2 (FastEthernet0/0), len 1400, policy routed *Mar 2 01:00:30.733: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 01:00:31.097: IP: s=100.1.1.1 (local), d=20.10.1.2!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 360/362/364 ms R4#, len 1400, policy match *Mar 2 01:00:31.097: IP: route map Prob2, item 10, permit *Mar 2 01:00:31.097: IP: s=100.1.1.1 (local), d=20.10.1.2 (FastEthernet0/0), len 1400, policy routed *Mar 2 01:00:31.097: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 01:00:31.461: IP: s=100.1.1.1 (local), d=20.10.1.2, len 1400, policy match *Mar 2 01:00:31.461: IP: route map Prob2, item 10, permit *Mar 2 01:00:31.461: IP: s=100.1.1.1 (local), d=20.10.1.2 (FastEthernet0/0), len 1400, policy routed *Mar 2 01:00:31.461: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 01:00:31.821: IP: s=100.1.1.1 (local), d=20.10.1.2, len 1400, policy match R4# *Mar 2 01:00:31.825: IP: route map Prob2, item 10, permit *Mar 2 01:00:31.825: IP: s=100.1.1.1 (local), d=20.10.1.2 (FastEthernet0/0), len 1400, policy routed *Mar 2 01:00:31.825: IP: local to FastEthernet0/0 180.40.7.129 R4# RACK9AS>7 [Resuming connection 7 to r7 ... ] *M\ % Unknown command or computer name, or unable to find computer address R7#\config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#\ip ospf cost 1200000nt s1/0.2  R7(config-subif)#int s1/0.2\ ip ospf cost 1200nip ospf cost 1200oip ospf cost 1200 ip ospf cost 1200 R7(config-subif)#^Z R7# *Mar 2 00:58:20.366: %SYS-5-CONFIG_I: Configured from console by console R7# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#sh run | b acces access-list 100 permit icmp any any echo access-list 100 permit icmp any any echo-reply ! route-map Prob2 permit 10 match ip address 100 set ip next-hop 180.40.7.129 ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! ! end R4# R4# RACK9AS>2 [Resuming connection 2 to r2 ... ] R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0.2 R2(config-subif)#tr R2(config-subif)#traffic-shape ? adaptive Enable Traffic Shaping adaptation to BECN fecn-adapt Enable Traffic Shaping reflection of FECN as BECN group configure token bucket: group CIR (bps) [Bc (bits) [Be (bits)]] rate configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]] R2(config-subif)#traffic-shape rate ? <8000-100000000> Target Bit Rate (bits per second) R2(config-subif)#traffic-shape rate 64000 ? <0-100000000> bits per interval, sustained R2(config-subif)#traffic-shape rate 64000 R2(config-subif)#traf R2(config-subif)#traffic-shape ad R2(config-subif)#traffic-shape adaptive ? <1-100000000> Lower Bound Target Bit Rate (bits per second) R2(config-subif)#traffic-shape adaptive 32000 ? R2(config-subif)#traffic-shape adaptive 32000 R2(config-subif)#do sh traff Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active - 64000 2000 8000 8000 125 1000 BECN R2(config-subif)#do sh trafftraffic-shape adaptive 32000 rate 64000 64000 R2(config-subif)#traffic-shape rate 64000 64000do sh traff  Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active - 64000 16000 64000 64000 1000 8000 BECN R2(config-subif)#do sh run int s 1/0.2 Building configuration... Current configuration : 230 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint traffic-shape rate 64000 64000 64000 1000 traffic-shape adaptive 32000 frame-relay interface-dlci 207 end R2(config-subif)# R2# *Mar 2 01:03:16.752: %SYS-5-CONFIG_I: Configured from console by console R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0.2 R2(config-subif)#int s 1/0.2do sh run int s 1/0.2traff traffic-shape rate 64000 64000ntraffic-shape rate 64000 64000otraffic-shape rate 64000 64000 traffic-shape rate 64000 64000 R2(config-subif)#no traffic-shape rate 64000 64000int s 1/0.2 do sh run int s 1/0.2traff  R2(config-subif)#do sh traffno traffic-shape rate 64000 64000do sh traff  do sh traffno traffic-shape rate 64000 64000int s 1/0.2 no traffic-shape rate 64000 64000do sh traff  exit R2(config)#fram      map R2(config)#map-cl R2(config)#map-class ? atm Asynchronous transfer mode dialer Dial on Demand frame-relay Frame Relay R2(config)#map-class ffr R2(config)#map-class ffr   R2(config)#map-class frame-relay Prob3OptionB   R2(config-map-class)#fram,  R2(config-map-class)#frame-relay ? adaptive-shaping Adaptive traffic rate adjustment, Default = none bc Committed burst size (Bc), Default = 7000 bits be Excess burst size (Be), Default = 0 bits cir Committed Information Rate (CIR), Default = 56000 bps congestion Congestion management parameters custom-queue-list VC custom queueing end-to-end Configure frame-relay end-to-end VC parameters fair-queue VC fair queueing fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fragment fragmentation - Requires Frame Relay traffic-shaping to be configured at the interface level holdq Hold queue size for VC idle-timer Idle timeout for a SVC, Default = 120 sec interface-queue PVC interface queue parameters ip Assign a priority queue for RTP streams mincir Minimum acceptable CIR, Default = CIR/2 bps priority-group VC priority queueing tc Policing Measurement Interval (Tc) traffic-rate VC traffic rate voice voice options R2(config-map-class)#frame-relay > cir R2(config-map-class)#frame-relay cir 64000 R2(config-map-class)#frame-relay cir 64000         bc ? <300-16000000> Applied to both Incoming/Outgoing Bc, Bits in Incoming Bc out Outgoing Bc R2(config-map-class)#frame-relay bc 64000 R2(config-map-class)#fcram      ram ad R2(config-map-class)#fram adaptive-shaping ? becn Enable rate adjustment in response to BECN foresight Enable rate adjustment in response to ForeSight messages and BECN interface-congestion Enable rate adjustment depend on interface queue R2(config-map-class)#fram adaptive-shaping be R2(config-map-class)#fram adaptive-shaping becn ? R2(config-map-class)#fram adaptive-shaping becn R2(config-map-class)#int     fram ? adaptive-shaping Adaptive traffic rate adjustment, Default = none bc Committed burst size (Bc), Default = 7000 bits be Excess burst size (Be), Default = 0 bits cir Committed Information Rate (CIR), Default = 56000 bps congestion Congestion management parameters custom-queue-list VC custom queueing end-to-end Configure frame-relay end-to-end VC parameters fair-queue VC fair queueing fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fragment fragmentation - Requires Frame Relay traffic-shaping to be configured at the interface level holdq Hold queue size for VC idle-timer Idle timeout for a SVC, Default = 120 sec interface-queue PVC interface queue parameters ip Assign a priority queue for RTP streams mincir Minimum acceptable CIR, Default = CIR/2 bps priority-group VC priority queueing tc Policing Measurement Interval (Tc) traffic-rate VC traffic rate voice voice options R2(config-map-class)#fram be ? <0-16000000> Applied to both Incoming/Outgoing Be, Bits in Incoming Be out Outgoing Be R2(config-map-class)#fram be 32000 R2(config-map-class)#itn     int s 1/0.2 R2(config-subif)#int s 1/0.2fram be 32000adaptive-shaping becn e-relay bc 64000 cir 64000map-class frame-relay Prob3OptionBexit do sh traffno traffic-shape rate 64000 64000no traffic-shape rate 64000 64000  traffic-shape rate 64000 64000  traffic-shape rate 64000 64000 ? <0-100000000> bits per interval, excess in first interval R2(config-subif)# traffic-shape rate 64000 64000 32000 R2(config-subif)# traffic-shape rate 64000 64000 32000 traf ad R2(config-subif)#traf adaptive 32000 R2(config-subif)#do sh run     traff Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active - 64000 12000 64000 32000 1000 8000 BECN R2(config-subif)#\ sh run int s 1/0.2 ^ % Invalid input detected at '^' marker. R2(config-subif)#sh run int s 1/0.2nsh run int s 1/0.2sh run int s 1/0.2 dsh run int s 1/0.2osh run int s 1/0.2 sh run int s 1/0.2 Building configuration... Current configuration : 230 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint traffic-shape rate 64000 64000 32000 1000 traffic-shape adaptive 32000 frame-relay interface-dlci 207 end R2(config-subif)# R2# *Mar 2 01:08:05.978: %SYS-5-CONFIG_I: Configured from console by console R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0.2 R2(config-subif)#int s 1/0.2do sh run int s 1/0.2sh run int s 1/0.2 do sh traff traf adaptive 32000 traffic-shape rate 64000 64000 32000 ? <0-4096> Set buffer limit R2(config-subif)# traffic-shape rate 64000 64000 32000   0 ? <0-4096> Set buffer limit R2(config-subif)# traffic-shape rate 64000 64000 32000 n traffic-shape rate 64000 64000 32000 o traffic-shape rate 64000 64000 32000  traffic-shape rate 64000 64000 32000  R2(config-subif)#fra,   m clas R2(config-subif)#fram class ? WORD map class name R2(config-subif)#fram class            do shrun frame-relay interface-dlci 207 shrun frame-relay interface-dlci 207 ^ % Invalid input detected at '^' marker. R2(config-subif)# frame-relay interface-dlci 207 R2(config-fr-dlci)#class R2(config-fr-dlci)#class ? WORD map class name R2(config-fr-dlci)#class Pro         do sh run | b map-c map-class frame-relay Prob3OptionB frame-relay cir 64000 frame-relay bc 64000 frame-relay be 32000 frame-relay adaptive-shaping becn ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! ! --More--   R2(config-fr-dlci)#class Prob3OptionB R2(config-fr-dlci)#dos  sh traff R2(config-fr-dlci)#int s 1/0 R2(config-if)#fram traff R2(config-if)#fram traffic-shaping R2(config-if)#fram traffic-shaping int s 1/0 do sh traff Interface Se1/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 201 56000 875 7000 0 125 875 - Interface Se1/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 203 56000 875 7000 0 125 875 - Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 207 64000 5000 64000 32000 125 1000 BECN R2(config-if)#^Z R2#sh run | *Mar 2 01:13:48.355: %SYS-5-CONFIG_I: Configured from console by console R2#sh run | b 0 1/0.2 interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 207 class Prob3OptionB ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 clock rate 64000 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 --More--   R2#sh run | b 1/0.2   interface Serial1/0 no ip address encapsulation frame-relay no fair-queue frame-relay traffic-shaping ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 203 ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 207 class Prob3OptionB ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 --More--   clock rate 64000 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 --More--   log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ! no ip http server no ip http secure-server ! ! map-class frame-relay Prob3OptionB frame-relay cir 64000 frame-relay bc 64000 frame-relay be 32000 frame-relay adaptive-shaping becn ! ! ! ! ! ! ! ! ! --More--   R2#confiog     ig t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#pol R2(config)#policy-map Prob3aOption  C R2(config-pmap)#class class-defa R2(config-pmap)#class class-defa ault R2(config-pmap-c)#sh R2(config-pmap-c)#shape avq R2(config-pmap-c)#shape avq  R2(config-pmap-c)#shape average ? <8000-154400000> Target Bit Rate (bits per second), the value needs to be multiple of 8000 percent % of interface bandwidth for Committed information rate R2(config-pmap-c)#shape average 64000 ? <256-154400000> bits per interval, sustained. Needs to be multiple of 128. Recommend not to configure it, the algorithm will find out the best value R2(config-pmap-c)#shape average 64000 64000 ? <0-154400000> bits per interval, excess. Needs to be multiple of 128. Bc will be used if you don't configure it. R2(config-pmap-c)#shape average 64000 64000 32000 ? R2(config-pmap-c)#shape average 64000 64000 32000 R2(config-pmap-c)#sh ? adaptive Enable Traffic Shaping adaptation to BECN average configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc only per interval fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fr-voice-adapt Enable rate adjustment depending on voice presence max-buffers Set Maximum Buffer Limit peak configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc+Be per interval R2(config-pmap-c)#sh ad R2(config-pmap-c)#sh adaptive ? <8000-154400000> Lower Bound Target Bit Rate (bits per second) R2(config-pmap-c)#sh adaptive 32000 ? R2(config-pmap-c)#sh adaptive 32000 R2(config-pmap-c)#int s 1/0.2 R2(config-subif)#int s 1/0.2sh adaptive 32000 ape average 64000 64000 32000 class class-default policy-map Prob3aOptionCdo sh traff fram traffic-shaping do sh traff fram traffic-shaping int s 1/0 do sh traffint s 1/0 .2 R2(config-subif)#ser   int s 1/0.2sh adaptive 32000 ape average 64000 64000 32000 class class-default policy-map Prob3aOptionCdo sh traff fram traffic-shaping int s 1/0 do sh traffclass Prob3OptionBdo sh run | b map-c frame-relay interface-dlci 207 R2(config-fr-dlci)# frame-relay interface-dlci 207int s 1/0.2 sh adaptive 32000 ape average 64000 64000 32000 class class-default policy-map Prob3aOptionCdo sh traff fram traffic-shaping int s 1/0 do sh traffclass Prob3OptionBnclass Prob3OptionBoclass Prob3OptionB class Prob3OptionB R2(config-fr-dlci)#exit R2(config-subif)#serv R2(config-subif)#service-policy Prob3OptionB C ^ % Invalid input detected at '^' marker. R2(config-subif)#service-policy Prob3OptionCoProb3OptionCuProb3OptionCtProb3OptionC Prob3OptionC % policy map Prob3OptionC not configured R2(config-subif)#service-policy out Prob3OptionC            Prob3aOptionC Shaping is not allowed simultaneously at the physical interface and subinterfaces or at interface/subinterface and PVCs R2(config-subif)#int s 1/0 R2(config-if)#no fram traff R2(config-if)#inno fram traffint s 1/0 .2 R2(config-subif)#int s 1/0.2no fram traffint s 1/0 service-policy out Prob3aOptionC R2(config-subif)#do sh pol int s 1/0.2 Serial1/0.2 Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no R2(config-subif)#^Z R2# *Mar 2 01:18:49.938: %SYS-5-CONFIG_I: Configured from console by console R2#sah run | b pol ^ % Invalid input detected at '^' marker. R2#sah run | b polh run | b pol  policy-map Prob3aOptionC class class-default shape average 64000 64000 32000 shape adaptive 32000 ! ! ! ! ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 20.10.1.1 255.255.255.0 duplex auto --More--   speed auto ! interface Serial1/0 no ip address encapsulation frame-relay ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 203 ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 207 service-policy output Prob3aOptionC ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 --More--   R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0.2do sh pol int s 1/0.2service-policy out Prob3aOptionCdo sh pol int s 1/0.2 int s 1/0.2  R2(config-subif)#int s 1/0.2do sh pol int s 1/0.2service-policy out Prob3aOptionCnservice-policy out Prob3aOptionCoservice-policy out Prob3aOptionC service-policy out Prob3aOptionC R2(config-subif)#no service-policy out Prob3aOptionCint s 1/0.2 do sh pol int s 1/0.2service-policy out Prob3aOptionCint s 1/0.2 no fram traffint s 1/0 service-policy out Prob3aOptionCOptionC Prob3OptionC exit no class Prob3OptionB frame-relay interface-dlci 207 R2(config-fr-dlci)#exci   xit R2(config-subif)#exit frame-relay interface-dlci 207 R2(config-fr-dlci)#class prob3      P  Prob3  Optoin   ion  D %Creating new map-class. R2(config-fr-dlci)#ex  exit R2(config-subif)#exit R2(config)#mal R2(config)#mal  R2(config)#map R2(config)#map-cl R2(config)#map-class fram Prob3OptionD R2(config-map-class)#serv R2(config-map-class)#service-policy Prob3aOptionC ^ % Invalid input detected at '^' marker. R2(config-map-class)#service-policy Prob3aOptionCoProb3aOptionCuProb3aOptionCtProb3aOptionC Prob3aOptionC R2(config-map-class)#itn     do sh pol in s 1? % Unrecognized command R2(config-map-class)#do sh pol in s 10service-policy out Prob3aOptionCdo sh pol in s 10  /0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 0 0 0 0 no R2(config-map-class)#do pinf   g          RACK9AS>6 [Resuming connection 6 to r6 ... ] ping 100.1.1.1 re 10000000 Type escape sequence to abort. Sending 10000000, 100-byte ICMP Echos to 100.1.1.1, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!! RACK9AS>2 [Resuming connection 2 to r2 ... ] R2(config-map-class)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 2 packets, 449 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 2 449 0 0 no R2(config-map-class)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 3 packets, 533 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 3 533 0 0 no R2(config-map-class)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 3 packets, 533 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 3 533 0 0 no R2(config-map-class)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 3 packets, 533 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 3 533 0 0 no R2(config-map-class)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 3 packets, 533 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 3 533 0 0 no R2(config-map-class)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 3 packets, 533 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 3 533 0 0 no R2(config-map-class)#int s 10-  /0 R2(config-if)#framm    traff Generic traffic shaping commands must be removed before enabling frame-relay traffic shaping. R2(config-if)#do shrui      run | b 1/0 interface Serial1/0 no ip address encapsulation frame-relay ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 203 ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 207 class Prob3OptionD ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 clock rate 64000 ! --More--   R2(config-if)#rdo sh run | b 1/0fram traff int s 1/0 do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 6 packets, 1066 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 6 1066 0 0 no R2(config-if)# RACK9AS>6 [Resuming connection 6 to r6 ... ] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !. Success rate is 99 percent (2171/2172), round-trip min/avg/max = 48/52/84 ms S6#x ping 100.1.1.1 re 10000000.1 re 10000000  re 10000000  re 10000000  re 10000000  re 10000000  re 10000000  re 10000000  re 10000000  re 10000000 1 re 100000008 re 100000000 re 10000000. re 100000004 re 100000000 re 10000000. re 100000007 re 10000000. re 100000006 re 100000006 re 10000000 Type escape sequence to abort. Sending 10000000, 100-byte ICMP Echos to 180.40.7.66, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!! RACK9AS>2 [Resuming connection 2 to r2 ... ] R2(config-if)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 9 packets, 1599 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 9 1599 0 0 no R2(config-if)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 9 packets, 1599 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 9 1599 0 0 no R2(config-if)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 9 packets, 1599 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 9 1599 0 0 no R2(config-if)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 9 packets, 1599 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 9 1599 0 0 no R2(config-if)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 9 packets, 1599 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 9 1599 0 0 no R2(config-if)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 9 packets, 1599 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 9 1599 0 0 no R2(config-if)# RACK9AS>6 [Resuming connection 6 to r6 ... ] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!. Success rate is 99 percent (691/692), round-trip min/avg/max = 56/58/104 ms S6#ping 180.40.7.66 re 10000000 size 1400 Type escape sequence to abort. Sending 10000000, 1400-byte ICMP Echos to 180.40.7.66, timeout is 2 seconds: !!! RACK9AS>2 [Resuming connection 2 to r2 ... ] do sh pol in s 1/0.2  R2(config-if)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 11 packets, 2048 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 11 2048 0 0 no R2(config-if)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 11 packets, 2048 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 11 2048 0 0 no R2(config-if)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 11 packets, 2048 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 11 2048 0 0 no R2(config-if)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 12 packets, 2132 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 12 2132 0 0 no R2(config-if)#do sh pol in s 1/0.2 Serial1/0.2: DLCI 207 - Service-policy output: Prob3aOptionC Class-map: class-default (match-any) 12 packets, 2132 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 64000/64000 12000 64000 32000 1000 8000 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active BECN 0 12 2132 0 0 no R2(config-if)#traf    fram R2(config-if)#frame-relay traff R2(config-if)#frame-relay traffic-shaping Generic traffic shaping commands must be removed before enabling frame-relay traffic shaping. R2(config-if)#intt frame-relay traffic-shaping do sh pol in s 1/0.2 in s 1/0.2 in s 1/0.2 in s 1/0.2 in s 1/0.2 in s 1/0.2 in s 1/0.2 in s 1/0.2 in s 1/0.2 in s 1/0.2 in s 1/0.2  R2(config-subif)#in s 1/0.2frame-relay traffic-shaping do sh pol in s 1/0.2 run | b 1/0 fram traff int s 1/0 do sh pol in s 1/0.2service-policy out Prob3aOptionCProb3aOptionC map-class fram Prob3OptionD exit class Prob3OptionD frame-relay interface-dlci 207 R2(config-fr-dlci)#class     do sh run | b map-c map-class frame-relay Prob3OptionB frame-relay cir 64000 frame-relay bc 64000 frame-relay be 32000 frame-relay adaptive-shaping becn ! map-class frame-relay Prob3OptionD service-policy output Prob3aOptionC ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 --More--   R2(config-fr-dlci)#rob3OptionB           class Prob3OptionB R2(config-fr-dlci)#do shru   run int s 1/0.2 Building configuration... Current configuration : 178 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 207 class Prob3OptionB end R2(config-fr-dlci)#int s 1/0 R2(config-if)#fram ta raff R2(config-if)#exut  it R2(config)#do sh run |   b map=-  -c map-class frame-relay Prob3OptionB frame-relay cir 64000 frame-relay bc 64000 frame-relay be 32000 frame-relay adaptive-shaping becn ! map-class frame-relay Prob3OptionD service-policy output Prob3aOptionC ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 --More--   R2(config)#map-class frame-relay Prob3OptionD R2(config-map-class)#fra > ? adaptive-shaping Adaptive traffic rate adjustment, Default = none bc Committed burst size (Bc), Default = 7000 bits be Excess burst size (Be), Default = 0 bits cir Committed Information Rate (CIR), Default = 56000 bps congestion Congestion management parameters custom-queue-list VC custom queueing end-to-end Configure frame-relay end-to-end VC parameters fair-queue VC fair queueing fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fragment fragmentation - Requires Frame Relay traffic-shaping to be configured at the interface level holdq Hold queue size for VC idle-timer Idle timeout for a SVC, Default = 120 sec interface-queue PVC interface queue parameters ip Assign a priority queue for RTP streams mincir Minimum acceptable CIR, Default = CIR/2 bps priority-group VC priority queueing tc Policing Measurement Interval (Tc) traffic-rate VC traffic rate voice voice options R2(config-map-class)#fra tra R2(config-map-class)#fra traffic-rate ? <600-45000000> Committed Information Rate (CIR) R2(config-map-class)#fra traffic-rate 64000 ~ ? <0-45000000> Peak rate (CIR + EIR) R2(config-map-class)#fra traffic-rate 64000 0 ? R2(config-map-class)#fra traffic-rate 64000 0    R2(config-map-class)#do sh       fra traffic-rate 64000  96000 ? R2(config-map-class)#fra traffic-rate 64000 96000 R2(config-map-class)#exzi   xit R2(config)#map-class frame-relay Prob3OptionD R2(config-map-class)#map-class frame-relay Prob3OptionDnmap-class frame-relay Prob3OptionDomap-class frame-relay Prob3OptionD map-class frame-relay Prob3OptionD R2(config)#^Z R2# *Mar 2 01:31:28.682: %SYS-5-CONFIG_I: Configured from console by console R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#access-list             do sh access-list R2(config)#access-list 100 per     den ospgf      f any any R2(config)#access-list 100 per ip any any R2(config)#fram   R2(config)#frame-relay ? address Address Registration with neighbor de-list Build a classification list to be used in setting the DE bit switching enable frame relay pvc switching R2(config)#frame-relay de R2(config)#frame-relay de-list ? <1-10> DE list numbers R2(config)#frame-relay de-list 1 ? interface Identify packets from a named interface protocol Identify packets by protocol R2(config)#frame-relay de-list 1 pt ro R2(config)#frame-relay de-list 1 protocol ? appletalk AppleTalk arp IP ARP bridge Bridging clns ISO CLNS clns_es ISO CLNS End System clns_is ISO CLNS Intermediate System compressedtcp Compressed TCP decnet DECnet decnet_node DECnet Node decnet_router-l1 DECnet Router L1 decnet_router-l2 DECnet Router L2 ip IP ipx Novell IPX R2(config)#frame-relay de-list 1 protocol ip ? fragments Classify fragmented IP packets gt Identify packets greater than a specified size list To specify an access list lt Identify packets less than a specified size tcp Classify TCP packets 'to' or 'from' the specified port udp Classify UDP packets 'to' or 'from' the specified port R2(config)#frame-relay de-list 1 protocol ip li ? <1-199> IP access list <1300-2699> IP access list R2(config)#frame-relay de-list 1 protocol ip li 100 ? R2(config)#frame-relay de-list 1 protocol ip li 100 R2(config)#int s 1/0.2 R2(config-subif)#fram R2(config-subif)#frame-relay f de R2(config-subif)#frame-relay de-group 1 ? <16-1007> DLCI value R2(config-subif)#frame-relay de-group 1 203 ? R2(config-subif)#frame-relay de-group 1 203 R2(config-subif)#\ ^Z R2# *Mar 2 01:32:56.770: %SYS-5-CONFIG_I: Configured from console by console R2#sh run | b 1/. 0.2 interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 207 class Prob3OptionB ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 clock rate 64000 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 --More--   R2#sh run | b 1/0.2       b fram               config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0.2 R2(config-subif)#int s 1/0.2frame-relay de-group 1 203   7 R2(config-subif)#^Z R2#config tsh run | b 1/0.2 *Mar 2 01:33:52.710: %SYS-5-CONFIG_I: Configured from console by console R2#sh run | b 1/0.2 interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay de-group 1 207 frame-relay interface-dlci 207 class Prob3OptionB ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 clock rate 64000 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! --More--   R2#sh run | b fram frame-relay de-list 1 protocol ip list 100 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! policy-map Prob3aOptionC class class-default shape average 64000 64000 32000 shape adaptive 32000 ! ! --More--  ! ! ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 20.10.1.1 255.255.255.0 duplex auto speed auto ! interface Serial1/0 no ip address encapsulation frame-relay no fair-queue --More--   frame-relay traffic-shaping ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint frame-relay de-group 1 203 frame-relay interface-dlci 203 ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay de-group 1 207 frame-relay interface-dlci 207 class Prob3OptionB ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 clock rate 64000 ! --More--  interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 --More--  ! ip classless ! no ip http server no ip http secure-server ! ! map-class frame-relay Prob3OptionB frame-relay cir 64000 frame-relay bc 64000 frame-relay be 32000 frame-relay adaptive-shaping becn access-list 100 deny ospf any any access-list 100 permit ip any any ! ! ! ! ! ! ! ! ! --More--   R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#class   R2(config)#class-map OSPF R2(config-cmap)#match acc R2(config-cmap)#match access-group 100 R2(config-cmap)#exit R2(config)#pol Prob3b R2(config-pmap)#class OSPF R2(config-pmap-c)#set ? atm-clp Set ATM CLP bit to 1 cos Set IEEE 802.1Q/ISL class of service/user priority discard-class Discard behavior identifier dscp Set DSCP in IP(v4) and IPv6 packets fr-de Set FR DE bit to 1 ip Set IP specific values mpls Set MPLS specific values precedence Set precedence in IP(v4) and IPv6 packets qos-group Set QoS Group R2(config-pmap-c)#set fr R2(config-pmap-c)#set fr-de ? R2(config-pmap-c)#set fr-de R2(config-pmap-c)#exit R2(config-pmap)#exit R2(config)#do sh run | b pol policy-map Prob3aOptionC class class-default shape average 64000 64000 32000 shape adaptive 32000 policy-map Prob3b class OSPF set fr-de ! ! ! ! ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! --More--   R2(config)#policy-map Prob3aOptionC R2(config-pmap)#class class-fr d =  default R2(config-pmap-c)#serv R2(config-pmap-c)#service-policy ? WORD policy-map name R2(config-pmap-c)#service-policy OSPF    Prob3b ? R2(config-pmap-c)#service-policy Prob3b R2(config-pmap-c)#^Z R2# *Mar 2 01:38:16.290: %SYS-5-CONFIG_I: Configured from console by console R2#sh run Building configuration... Current configuration : 2197 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R2 ! boot-start-marker boot-end-marker ! ! no network-clock-participate slot 1 no network-clock-participate wic 0 no aaa new-model ip subnet-zero ! ! ! ip cef no ip domain lookup --More--   R2#sh run Building configuration... Current configuration : 2197 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R2 ! boot-start-marker boot-end-marker ! ! no network-clock-participate slot 1 no network-clock-participate wic 0 no aaa new-model ip subnet-zero ! ! ! ip cef no ip domain lookup --More--  ip audit po max-events 100 frame-relay de-list 1 protocol ip list 100 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! class-map match-all OSPF match access-group 100 ! ! policy-map Prob3b --More--   class OSPF set fr-de policy-map Prob3aOptionC class class-default shape average 64000 64000 32000 shape adaptive 32000 service-policy Prob3b ! ! ! ! ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! --More--   R2# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Mar 2 0 R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s 1/0 R3(config-if)#do sh run int s 10 sh run int s 10 ^ % Invalid input detected at '^' marker. R3(config-if)#do sh run int s 10/0 Building configuration... Current configuration : 223 bytes ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network point-to-multipoint frame-relay map ip 180.40.7.65 307 broadcast frame-relay map ip 180.40.7.67 302 broadcast end R3(config-if)#frame-relay map ip 180.40.7.65 307 broadcast ? cisco Use CISCO Encapsulation compress Enable TCP/IP and RTP/IP header compression ietf Use RFC1490/RFC2427 Encapsulation nocompress Do not compress TCP/IP headers payload-compression Use payload compression rtp RTP header compression parameters tcp TCP header compression parameters R3(config-if)#frame-relay map ip 180.40.7.65 307 broadcast tcp ? header-compression Enable TCP/IP header compression R3(config-if)#frame-relay map ip 180.40.7.65 307 broadcast tcp he R3(config-if)#$ map ip 180.40.7.65 307 broadcast tcp header-compression ? active Always compress TCP/IP headers connections Maximum number of compressed TCP connections passive Compress for destinations sending compressed headers R3(config-if)#$ map ip 180.40.7.65 307 broadcast tcp header-compression con R3(config-if)#$0.40.7.65 307 broadcast tcp header-compression connections ? <3-256> Number of TCP connections R3(config-if)#$0.40.7.65 307 broadcast tcp header-compression connections 20 R3(config-if)#^Z R3#config tsh access-listrun | b 0/0 *Mar 2 01:42:26.500: %SYS-5-CONFIG_I: Configured from console by console R3#sh run | b 0/0access-listconfig t  wr Building configuration... [OK] R3# R3#sh run int  s 1/0 Building configuration... Current configuration : 261 bytes ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network point-to-multipoint frame-relay map ip 180.40.7.65 307 broadcast tcp header-compression connections 20 frame-relay map ip 180.40.7.67 302 broadcast end R3#180.40.7.65 Trying 180.40.7.65 ... Open R7# R7# R7#q [Connection to 180.40.7.65 closed by foreign host] R3#shj    ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/32 is subnetted, 1 subnets O 100.1.1.1 [110/2] via 180.40.7.130, 00:45:56, FastEthernet0/0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/792] via 180.40.7.2, 00:45:56, Serial1/2 [110/792] via 180.40.7.67, 00:45:56, Serial1/0 O 20.10.1.0 [110/782] via 180.40.7.2, 00:45:56, Serial1/2 [110/782] via 180.40.7.67, 00:45:56, Serial1/0 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:45:56, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/781] via 180.40.7.2, 00:45:57, Serial1/2 [110/781] via 180.40.7.67, 00:45:57, Serial1/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:45:57, FastEthernet0/0 --More--  C 180.40.7.0/27 is directly connected, Serial1/2 O 180.40.7.67/32 [110/781] via 180.40.7.2, 00:45:59, Serial1/2 [110/781] via 180.40.7.67, 00:45:59, Serial1/0 O 180.40.7.65/32 [110/1] via 180.40.7.131, 00:45:59, FastEthernet0/0 C 180.40.7.64/27 is directly connected, Serial1/0 R3#sh ip ospf int s 1/0 Serial1/0 is up, line protocol is up Internet Address 180.40.7.66/27, Area 0 Process ID 1, Router ID 180.40.7.129, Network Type POINT_TO_MULTIPOINT, Cost: 781 Transmit Delay is 1 sec, State POINT_TO_MULTIPOINT, Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5 oob-resync timeout 120 Hello due in 00:00:05 Index 2/2, flood queue length 0 Next 0x0(0)/0x0(0) Last flood scan length is 1, maximum is 1 Last flood scan time is 0 msec, maximum is 12 msec Neighbor Count is 2, Adjacent neighbor count is 2 Adjacent with neighbor 208.28.1.1 Adjacent with neighbor 180.40.7.162 Suppress hello for 0 neighbor(s) R3# RACK9AS> [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s 1/0 R3(config-if)#no ip ospf nety ^ % Invalid input detected at '^' marker. R3(config-if)#no ip ospf nety  R3(config-if)# *Mar 2 01:45:53.816: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on Serial1/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 01:45:53.820: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0 from FULL to DOWN, Neighbor Down: Interface down or detached R3(config-if)#^Z R3# RACK9AS>7 [Resuming connection 7 to r7 ... ] R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0.1 R7(config-subif)#ip ospf net br R7(config-subif)# *Mar 2 01:46:02.726: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on Serial1/0.1 from FULL to DOWN, Neighbor Down: Interface down or detached R7(config-subif)#ip ospf hell 30 R7(config-subif)#do sh ip ospf int s 1/0.1 Serial1/0.1 is up, line protocol is up Internet Address 180.40.7.65/27, Area 0 Process ID 1, Router ID 208.28.1.1, Network Type BROADCAST, Cost: 781 Transmit Delay is 1 sec, State WAITING, Priority 1 No designated router on this network No backup designated router on this network Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5 oob-resync timeout 120 Hello due in 00:00:17 Wait time before Designated router selection 00:00:18 Index 3/3, flood queue length 0 Next 0x0(0)/0x0(0) Last flood scan length is 1, maximum is 1 Last flood scan time is 0 msec, maximum is 5 msec Neighbor Count is 1, Adjacent neighbor count is 0 Suppress hello for 0 neighbor(s) R7(config-subif)# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Mar R3#sh ip ospf int s 1/0 Serial1/0 is up, line protocol is up Internet Address 180.40.7.66/27, Area 0 Process ID 1, Router ID 180.40.7.129, Network Type NON_BROADCAST, Cost: 781 Transmit Delay is 1 sec, State WAITING, Priority 1 No designated router on this network No backup designated router on this network Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5 oob-resync timeout 120 Hello due in 00:00:04 Wait time before Designated router selection 00:01:04 Index 2/2, flood queue length 0 Next 0x0(0)/0x0(0) Last flood scan length is 1, maximum is 1 Last flood scan time is 0 msec, maximum is 12 msec Neighbor Count is 2, Adjacent neighbor count is 0 Suppress hello for 0 neighbor(s) R3# RACK9AS>2 [Resuming connection 2 to r2 ... ] R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0.1 R2(config-subif)#ip ospf 2 ^ % Invalid input detected at '^' marker. R2(config-subif)#et br ^ % Invalid input detected at '^' marker. R2(config-subif)#et brip ospf 2 net br R2(config-subif)#ip o *Mar 2 01:47:01.679: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on Serial1/0.1 from FULL to DOWN, Neighbor Down: Interface down or detached R2(config-subif)#ip ospf hel;l    lk  30 R2(config-subif)#^Z R2# *Mar 2 01:47:08.190: %SYS-5-CONFIG_I: Configured from console by console R2#do shr  ru int      n unb t     int s 1/0.2 ^ % Invalid input detected at '^' marker. R2#do sh run int s 1/0.2do sh run int s 1/0.2 sh run int s 1/0.2 sh run int s 1/0.2  Building configuration... Current configuration : 206 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay de-group 1 207 frame-relay interface-dlci 207 class Prob3OptionB end R2# *Mar 2 01:47:52.555: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on Serial1/0.1 from LOADING to FULL, Loading Done R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0;.  .1 R2(config-subif)#ip ospf pri 0 R2(config-subif)#^Z R2# RACK9AS>7 [Resuming connection 7 to r7 ... ] *Mar 2 0 R7(config-subif)#co  ip ospf pri 0 R7(config-subif)#^Z R7# *Mar 2 01:49:21.600: %SYS- RACK9AS>3 [Resuming connection 3 to r3 ... ] *Mar 2 R3#sh ip ospf nei Neighbor ID Pri State Dead Time Address Interface 180.40.7.162 0 FULL/DROTHER 00:01:38 180.40.7.67 Serial1/0 208.28.1.1 0 FULL/DROTHER 00:01:43 180.40.7.65 Serial1/0 180.40.7.162 0 FULL/ - 00:00:30 180.40.7.2 Serial1/2 180.40.7.130 1 FULL/BDR 00:00:33 180.40.7.130 FastEthernet0/0 208.28.1.1 1 FULL/DR 00:00:32 180.40.7.131 FastEthernet0/0 R3#sh oi  ip ospf      route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/32 is subnetted, 1 subnets O 100.1.1.1 [110/2] via 180.40.7.130, 00:00:55, FastEthernet0/0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/792] via 180.40.7.2, 00:00:55, Serial1/2 [110/792] via 180.40.7.67, 00:00:55, Serial1/0 O 20.10.1.0 [110/782] via 180.40.7.2, 00:00:55, Serial1/2 [110/782] via 180.40.7.67, 00:00:55, Serial1/0 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:00:55, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 5 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/781] via 180.40.7.2, 00:00:56, Serial1/2 [110/781] via 180.40.7.67, 00:00:56, Serial1/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:00:56, FastEthernet0/0 --More--  C 180.40.7.0/27 is directly connected, Serial1/2 C 180.40.7.64/27 is directly connected, Serial1/0 R3#sh ip routeospf neiint s 1/0config t sh ip ospf int s 1/0route 180.40.7.65 Trying 180.40.7.65 ... Open R3#disc Closing connection to 180.40.7.65 [confirm] R3# RACK9AS>7 [Resuming connection 7 to r7 ... ] 5-CONFIG_I: Configured from console by console R7#wr Building configuration... [OK] R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0.1 R7(config-subif)#fram ? class Define a map class on the interface de-group Associate a DE group with a DLCI interface-dlci Define a DLCI on an interface/subinterface inverse-arp Enable/disable FR inverse ARP ip Frame Relay Internet Protocol config commands map Map a protocol address to a DLCI address payload-compression Use payload compression priority-dlci-group Define a priority group of DLCIs vc-bundle configure a frame-relay vc-bundle R7(config-subif)#fram ip ? rtp RTP header compression parameters tcp TCP header compression parameters R7(config-subif)#fram ip tcp ? compression-connections Maximum number of compressed TCP connections header-compression Enable TCP/IP header compression R7(config-subif)#fram ip tcp h R7(config-subif)#fram ip tcp header-compression ? passive Compress for destinations sending compressed headers R7(config-subif)#fram ip tcp header-compression pas R7(config-subif)#fram ip tcp header-compression passive R7(config-subif)#^Z R7# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#disc180.40.7.65 Trying 180.40.7.65 ... Open R7# RACK9AS>3 [Resuming connection 3 to r3 ... ] R7# R7# R7# R7# R7# R7# RACK9AS> [Resuming connection 3 to r3 ... ] R7# R3#deb com R3#deb compress COMPRESS debugging is on R3# [Resuming connection 1 to 180.40.7.65 ... ] R7# R7# R7# R7# R7# R7# R3#deb ip tcp ? Winscale Window-Scale driver TCP driver events driver-pak TCP driver verbose header-compression Header compression statistics intercept TCP intercept packet TCP packets rcmd Rcmd transactions sack Selective-ACK transactions Significant TCP events R3#deb ip tcp he R3#deb ip tcp header-compression TCP header compression debugging is on R3# [Resuming connection 1 to 180.40.7.65 ... ] R7# R7# R7# R7# *Mar 2 01:57:26.788: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 01:57:26.960: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 01:57:27.100: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 01:57:27.293: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 01:57:27.389: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 01:57:27.605: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0q [Connection to 180.40.7.65 closed by foreign host] R3# *Mar 2 01:58:03.484: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 01:58:03.548: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 01:58:03.688: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 01:58:03.688: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 R3# R3#u all All possible debugging has been turned off R3#sh run|      n int s 1/0 Building configuration... Current configuration : 224 bytes ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay frame-relay map ip 180.40.7.65 307 broadcast tcp header-compression connections 20 frame-relay map ip 180.40.7.67 302 broadcast end R3# RACK9AS>7 [Resuming connection 7 to r7 ... ] * R7#sh run int s 1/0.1 Building configuration... Current configuration : 240 bytes ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network broadcast ip ospf hello-interval 30 ip ospf priority 0 frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive end R7# R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#do sh access-list R7(config)#access-list 1 % Incomplete command. R7(config)#access-list 1 per 208.28.1.2 R7(config)#class  - R7(config)#class-map S5Telnet R7(config-cmap)#match pro R7(config-cmap)#match protocol telnet R7(config-cmap)#match accc  R7(config-cmap)#match access-group 1 R7(config-cmap)#exit R7(config)#class R7(config)#class-map S5Other R7(config-cmap)#class-map S5Otherexit match access-group 1 R7(config-cmap)#exit R7(config)#class R7(config)#class-map mat R7(config)#class-map match-an R7(config)#class-map match-any JPRG R7(config-cmap)#class-map match-any JPRGnclass-map match-any JPRGoclass-map match-any JPRG class-map match-any JPRG R7(config)#no class-map match-any JPRG  EG R7(config)#match pro R7(config)#match prot R7(config)#match prot          no class-map match-any JPEGno class-map match-any JPEG class-map match-any JPEG class-map match-any JPEG  R7(config-cmap)#match pro R7(config-cmap)#match protocol http R7(config-cmap)#match protocol http ? host Server Host Name mime Match MIME Type url Match URL String R7(config-cmap)#match protocol http mi R7(config-cmap)#match protocol http mime ? WORD Enter a string as the sub-protocol parameter R7(config-cmap)#match protocol http mime *jpeg R7(config-cmap)#do sh run | b class class-map match-any JPEG match protocol http mime "*jpeg" class-map match-all S5Other match access-group 1 class-map match-all S5Telnet match protocol telnet match access-group 1 ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 --More--   R7(config-cmap)#do sh run | b classmatch protocol http mime *jpeg                              match protocol http url *.jpeg R7(config-cmap)# match protocol http url *.jpg R7(config-cmap)# match protocol http url *.jpe R7(config-cmap)# match protocol http url *.jpegmatch protocol http url *.jpeg do sh run | b class match protocol http mime *jpegdo sh run | b class  class-map match-any JPEG match protocol http mime "*jpeg" match protocol http url "*.jpeg" match protocol http url "*.jpg" match protocol http url "*.jpe" class-map match-all S5Other match access-group 1 class-map match-all S5Telnet match protocol telnet match access-group 1 ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex ! interface BRI0/0 no ip address --More--   R7(config-cmap)#exit R7(config)#pol R7(config)#policy-map % Incomplete command. R7(config)#policy-map Prob5 R7(config-pmap)#class S5Telnet R7(config-pmap-c)#ban R7(config-pmap-c)#bandwidth ? <8-2000000> Kilo Bits per second percent % of total Bandwidth remaining % of the remaining bandwidth R7(config-pmap-c)#bandwidth 1000 R7(config-pmap-c)#exit R7(config-pmap)#class R7(config-pmap)#class JPEG R7(config-pmap-c)#sh R7(config-pmap-c)#shape ? adaptive Enable Traffic Shaping adaptation to BECN average configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc only per interval fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fr-voice-adapt Enable rate adjustment depending on voice presence max-buffers Set Maximum Buffer Limit peak configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc+Be per interval R7(config-pmap-c)#shape av R7(config-pmap-c)#shape average 100000   000 R7(config-pmap-c)#eit ^ % Invalid input detected at '^' marker. R7(config-pmap-c)#exit R7(config-pmap)#class S5Other R7(config-pmap-c)#pol R7(config-pmap-c)#police ? <8000-2000000000> Bits per second cir Committed information rate R7(config-pmap-c)#police 5000000 ? <1000-512000000> Burst bytes bc Conform burst conform-action action when rate is less than conform burst pir Peak Information Rate R7(config-pmap-c)#police 5000000 con R7(config-pmap-c)#police 5000000 conform-action ? drop drop packet exceed-action action when rate is within conform and conform + exceed burst set-clp-transmit set atm clp and send it set-discard-class-transmit set discard-class and send it set-dscp-transmit set dscp and send it set-frde-transmit set FR DE and send it set-mpls-exp-imposition-transmit set exp at tag imposition and send it set-mpls-exp-topmost-transmit set exp on topmost label and send it set-prec-transmit rewrite packet precedence and send it set-qos-transmit set qos-group and send it transmit transmit packet R7(config-pmap-c)#police 5000000 conform-action set- R7(config-pmap-c)#police 5000000 conform-action set-p R7(config-pmap-c)#police 5000000 conform-action set-prec-transmit 3 ? exceed-action action when rate is within conform and conform + exceed burst R7(config-pmap-c)#police 5000000 conform-action set-prec-transmit 3 ex R7(config-pmap-c)#$000 conform-action set-prec-transmit 3 exceed-action se R7(config-pmap-c)#$000 conform-action set-prec-transmit 3 exceed-action set-p R7(config-pmap-c)#$et-prec-transmit 3 exceed-action set-prec-transmit 1 R7(config-pmap-c)#$et-prec-transmit 3 exceed-action set-prec-transmit 1 R7(config-pmap-c-police)#exit R7(config-pmap-c)#exiut  t R7(config-pmap)#exit$et-prec-transmit 3 exceed-action set-prec-transmit 1class S5Other exit it shape average 100000class JPEG  R7(config-pmap-c)#class JPEGexit $et-prec-transmit 3 exceed-action set-prec-transmit 1class S5Other exit it shape average 1000000 R7(config-pmap-c)#exit R7(config-pmap)#int fa 0/1 R7(config-if)#serv out Prob5 R7(config-if)#^Z R7# *Mar 2 02:09:23.811: %SYS-5-CONFIG_I: Configured from console by console R7# R7# R7# R7# R7#sh pol Policy Map Prob5 Class S5Telnet Bandwidth 1000 (kbps) Max Threshold 64 (packets) Class JPEG Traffic Shaping Average Rate Traffic Shaping CIR 1000000 (bps) Max. Buffers Limit 1000 (Packets) Class S5Other police cir 5000000 bc 156250 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 R7#sh pol int fa 0/1 FastEthernet0/1 Service-policy output: Prob5 Class-map: S5Telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Match: access-group 1 Queueing Output Queue: Conversation 265 Bandwidth 1000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: JPEG (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http mime "*jpeg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpeg" 0 packets, 0 bytes --More--   5 minute rate 0 bps Match: protocol http url "*.jpg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpe" 0 packets, 0 bytes 5 minute rate 0 bps Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 1000000/1000000 6250 25000 25000 25 3125 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: S5Other (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 1 police: cir 5000000 bps, bc 156250 bytes conformed 0 packets, 0 bytes; actions: --More--   set-prec-transmit 3 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 1 conformed 0 bps, exceed 0 bps Class-map: class-default (match-any) 5 packets, 699 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R7# RACK9AS>5 [Resuming connection 5 to r5 ... ] S5#pin   telnet 180.40.7.130 Trying 180.40.7.130 ... Open R4# R4# R4# R4# R4# R4# R4# R4# R4# RACK9AS>7 [Resuming connection 7 to r7 ... ] R7#sh pol int fa 0/1 FastEthernet0/1 Service-policy output: Prob5 Class-map: S5Telnet (match-all) 19 packets, 1076 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Match: access-group 1 Queueing Output Queue: Conversation 265 Bandwidth 1000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: JPEG (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http mime "*jpeg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpeg" 0 packets, 0 bytes --More--   5 minute rate 0 bps Match: protocol http url "*.jpg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpe" 0 packets, 0 bytes 5 minute rate 0 bps Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 1000000/1000000 6250 25000 25000 25 3125 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: S5Other (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 1 police: cir 5000000 bps, bc 156250 bytes conformed 0 packets, 0 bytes; actions: --More--   R7# RACK9AS>5 [Resuming connection 5 to r5 ... ] R4#q [Connection to 180.40.7.130 closed by foreign host] S5# S5#telnet 180.40.7.130 80 Trying 180.40.7.130, 80 ... % Connection refused by remote host S5#telnet 180.40.7.130 80 Trying 180.40.7.130, 80 ... % Connection refused by remote host S5# S5#telnet 180.40.7.130 80 Trying 180.40.7.130, 80 ... % Connection refused by remote host S5#telnet 180.40.7.130 80  Trying 180.40.7.130 ... Open R4# R4#q [Connection to 180.40.7.130 closed by foreign host] S5# RACK9AS>5 7 [Resuming connection 7 to r7 ... ] R7#sh pol int fa 0/1 FastEthernet0/1 Service-policy output: Prob5 Class-map: S5Telnet (match-all) 50 packets, 2803 bytes 5 minute offered rate 1000 bps, drop rate 0 bps Match: protocol telnet Match: access-group 1 Queueing Output Queue: Conversation 265 Bandwidth 1000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: JPEG (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http mime "*jpeg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpeg" 0 packets, 0 bytes --More--   5 minute rate 0 bps --More--   Match: protocol http url "*.jpg" --More--   0 packets, 0 bytes --More--   5 minute rate 0 bps --More--   R7# R7# R7# R7#sh pol int fa 0/1 config tsh run int s 1/0.1config t  Enter configuration commands, one per line. End with CNTL/Z. R7(config)#^Z R7#config tsh pol int fa 0/1 *Mar 2 02:11:12.509: %SYS-5-CONFIG_I: Configured from console by console R7#sh pol int fa 0/1 FastEthernet0/1 Service-policy output: Prob5 Class-map: S5Telnet (match-all) 50 packets, 2803 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Match: access-group 1 Queueing Output Queue: Conversation 265 Bandwidth 1000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: JPEG (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http mime "*jpeg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpeg" 0 packets, 0 bytes --More--   5 minute rate 0 bps Match: protocol http url "*.jpg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpe" 0 packets, 0 bytes 5 minute rate 0 bps Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 1000000/1000000 6250 25000 25000 25 3125 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: S5Other (match-all) 3 packets, 174 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 1 police: cir 5000000 bps, bc 156250 bytes conformed 3 packets, 174 bytes; actions: --More--   R7# RACK9AS>5 [Resuming connection 5 to r5 ... ] S5#pin 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5#pin 180.40.7.129 re 100000 Type escape sequence to abort. Sending 100000, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! RACK9AS>7 [Resuming connection 7 to r7 ... ] R7#sh pol int fa 0/1 FastEthernet0/1 Service-policy output: Prob5 Class-map: S5Telnet (match-all) 50 packets, 2803 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Match: access-group 1 Queueing Output Queue: Conversation 265 Bandwidth 1000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: JPEG (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http mime "*jpeg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpeg" 0 packets, 0 bytes --More--   5 minute rate 0 bps --More--   Match: protocol http url "*.jpg" --More--   0 packets, 0 bytes --More--   5 minute rate 0 bps --More--   Match: protocol http url "*.jpe" --More--   0 packets, 0 bytes --More--   5 minute rate 0 bps --More--   Traffic Shaping --More--   Target/Average Byte Sustain Excess Interval Increment --More--   Rate Limit bits/int bits/int (ms) (bytes) --More--   1000000/1000000 6250 25000 25000 25 3125 --More--   --More--   Adapt Queue Packets Bytes Packets Bytes Shaping --More--   Active Depth Delayed Delayed Active --More--   - 0 0 0 0 0 no --More--   --More--   Class-map: S5Other (match-all) --More--   1772 packets, 201840 bytes --More--   5 minute offered rate 0 bps, drop rate 0 bps --More--   Match: access-group 1 --More--   police: --More--   cir 5000000 bps, bc 156250 bytes --More--   conformed 4367 packets, 497670 bytes; actions: --More--   set-prec-transmit 3 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 1 conformed 14000 bps, exceed 0 bps Class-map: class-default (match-any) 36 packets, 3805 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R7# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#serv ? alignment Control alignment correction and logging compress-config Compress the nvram configuration file config TFTP load config files dhcp Enable DHCP server and relay agent disable-ip-fast-frag Disable IP particle-based fast fragmentation exec-callback Enable exec callback exec-wait Delay EXEC startup on noisy lines finger Allow responses to finger requests hide-telnet-addresses Hide destination addresses in telnet command linenumber enable line number banner for each exec nagle Enable Nagle's congestion control algorithm old-slip-prompts Allow old scripts to operate with slip/ppp pad Enable PAD commands password-encryption Encrypt system passwords prompt Enable mode specific prompt pt-vty-logging Log significant VTY-Async events sequence-numbers Stamp logger messages with a sequence number slave-log Enable log capability of slave IPs tcp-keepalives-in Generate keepalives on idle incoming network connections tcp-keepalives-out Generate keepalives on idle outgoing network connections --More--   tcp-small-servers Enable small TCP servers (e.g., ECHO) telnet-zeroidle Set TCP window 0 when connection is idle timestamps Timestamp debug/log messages udp-small-servers Enable small UDP servers (e.g., ECHO) R3(config)#serv tcp R3(config)#serv tcp-sm R3(config)#serv tcp-small-servers R3(config)#^Z R3# RACK9AS>5 [Resuming connection 5 to r5 ... ] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! RACK9AS> [Resuming connection 5 to r5 ... ] !!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!. Success rate is 99 percent (49121/49122), round-trip min/avg/max = 1/2/136 ms S5#pin 180.40.7.129 re 100000         19 ^ % Invalid input detected at '^' marker. S5#pin 180.40.7.129 19  re 100000 telnet 180.40.7.130    29 19 Trying 180.40.7.129, 19 ... Open !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefg !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefgh "#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghi #$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghij $%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijk %&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijkl &'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklm '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmn ()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmno )*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnop *+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq +,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr ,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrs -./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrst ./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstu /0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuv 0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvw 1234567 RACK9AS>7 [Resuming connection 7 to r7 ... ] R7#sh pol int fa 0/1 FastEthernet0/1 Service-policy output: Prob5 Class-map: S5Telnet (match-all) 50 packets, 2803 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Match: access-group 1 Queueing Output Queue: Conversation 265 Bandwidth 1000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: JPEG (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http mime "*jpeg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpeg" 0 packets, 0 bytes --More--   5 minute rate 0 bps Match: protocol http url "*.jpg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpe" 0 packets, 0 bytes 5 minute rate 0 bps Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 1000000/1000000 6250 25000 25000 25 3125 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: S5Other (match-all) 49141 packets, 5601250 bytes 5 minute offered rate 138000 bps, drop rate 0 bps Match: access-group 1 police: cir 5000000 bps, bc 156250 bytes conformed 49144 packets, 5601412 bytes; actions: --More--   set-prec-transmit 3 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 1 conformed 138000 bps, exceed 0 bps Class-map: class-default (match-any) 65 packets, 6748 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R7#sh pol int fa 0/1 FastEthernet0/1 Service-policy output: Prob5 Class-map: S5Telnet (match-all) 50 packets, 2803 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Match: access-group 1 Queueing Output Queue: Conversation 265 Bandwidth 1000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: JPEG (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http mime "*jpeg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpeg" 0 packets, 0 bytes --More--   5 minute rate 0 bps Match: protocol http url "*.jpg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpe" 0 packets, 0 bytes 5 minute rate 0 bps Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 1000000/1000000 6250 25000 25000 25 3125 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: S5Other (match-all) 49167 packets, 5602654 bytes 5 minute offered rate 132000 bps, drop rate 0 bps Match: access-group 1 police: cir 5000000 bps, bc 156250 bytes conformed 49169 packets, 5602762 bytes; actions: --More--   set-prec-transmit 3 --More--   exceeded 0 packets, 0 bytes; actions: --More--   set-prec-transmit 1 --More--   conformed 126000 bps, exceed 0 bps --More--   R7# RACK9AS>5 [Resuming connection 5 to r5 ... ] 456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxy 3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz 456789:;<=>?@ABCDEFGHIJKLMNOP :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !" ;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"# <=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$ =>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$% >?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%& ?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&' @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'( ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'() BCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()* CDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+ DEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+, EFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz {|}~ !"#$%&'()*+,- FGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-. GHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./ HIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0 IJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01 JKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012 KLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123 LMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234 MNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345 NOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456 OPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234567 PQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345678 QRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789 RSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789: STUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:; TUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;< UVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<= VWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=> WXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>? XYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ YZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@A Z[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@AB [\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABC \]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCD ]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDE ^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEF _`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFG `abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGH abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHI bcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJ cdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJK defghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKL efghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLM fghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMN ghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNO hijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOP ijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQ jklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQR klmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRS lmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRST mnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTU nopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUV opqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW pqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWX qrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXY rstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ stuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[ tuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\ uvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\] vwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^ wxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ xyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` yz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`a z{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`ab {|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc |}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcd }~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcde ~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdef !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefg !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefgh "#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghi #$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghij $%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijk %&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijkl &'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklm '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmn ()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmno )*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnop *+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq +,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr ,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrs -./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrst ./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstu /0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuv 0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvw 123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwx 23456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxy 3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz 456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{ 56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{| 6789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|} 789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 89:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 9:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ ! :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !" ;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"# <=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$ =>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$% >?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%& ?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&' @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'( ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'() BCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()* CDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+ DEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+, EFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,- FGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-. GHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./ HIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0 IJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01 JKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012 KLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123 LMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234 MNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345 NOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456 OPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=> WXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>? XYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ YZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@A Z[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@AB [\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABC \]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCD ]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&' S5#disc Closing connection to 180.40.7.129 [confirm] S5#pin Protocol [ip]: Target IP address: 180.40.7.129 Repeat count [5]: 1000000 Datagram size [100]: 5000 Timeout in seconds [2]: Extended commands [n]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 1000000, 5000-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! RACK9AS>5 7 [Resuming connection 7 to r7 ... ] R7#sh pol int fa 0/1 FastEthernet0/1 Service-policy output: Prob5 Class-map: S5Telnet (match-all) 50 packets, 2803 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Match: access-group 1 Queueing Output Queue: Conversation 265 Bandwidth 1000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: JPEG (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http mime "*jpeg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpeg" 0 packets, 0 bytes --More--   5 minute rate 0 bps Match: protocol http url "*.jpg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpe" 0 packets, 0 bytes 5 minute rate 0 bps Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 1000000/1000000 6250 25000 25000 25 3125 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: S5Other (match-all) 50930 packets, 7731358 bytes 5 minute offered rate 116000 bps, drop rate 0 bps Match: access-group 1 police: cir 5000000 bps, bc 156250 bytes conformed 51430 packets, 8370858 bytes; actions: --More--   set-prec-transmit 3 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 1 conformed 116000 bps, exceed 0 bps Class-map: class-default (match-any) 89 packets, 9252 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R7#sh pol int fa 0/1 FastEthernet0/1 Service-policy output: Prob5 Class-map: S5Telnet (match-all) 50 packets, 2803 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Match: access-group 1 Queueing Output Queue: Conversation 265 Bandwidth 1000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: JPEG (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http mime "*jpeg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpeg" 0 packets, 0 bytes --More--   5 minute rate 0 bps Match: protocol http url "*.jpg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpe" 0 packets, 0 bytes 5 minute rate 0 bps Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 1000000/1000000 6250 25000 25000 25 3125 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: S5Other (match-all) 55558 packets, 13650570 bytes 5 minute offered rate 215000 bps, drop rate 0 bps Match: access-group 1 police: cir 5000000 bps, bc 156250 bytes conformed 56494 packets, 14847714 bytes; actions: --More--   set-prec-transmit 3 --More--   exceeded 0 packets, 0 bytes; actions: --More--   set-prec-transmit 1 --More--   conformed 311000 bps, exceed 0 bps --More--   R7# RACK9AS>5 [Resuming connection 5 to r5 ... ] ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!. Success rate is 99 percent (4858/4859), round-trip min/avg/max = 12/12/60 ms S5# RACK9AS>7 [Resuming connection 7 to r7 ... ] R7#sh run | b class class-map match-any JPEG match protocol http mime "*jpeg" match protocol http url "*.jpeg" match protocol http url "*.jpg" match protocol http url "*.jpe" class-map match-all S5Other match access-group 1 class-map match-all S5Telnet match protocol telnet match access-group 1 ! ! policy-map Prob5 class S5Telnet bandwidth 1000 class JPEG shape average 1000000 class S5Other police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 ! ! ! --More--   R7#sh run | b class class-map match-any JPEG match protocol http mime "*jpeg" match protocol http url "*.jpeg" match protocol http url "*.jpg" match protocol http url "*.jpe" class-map match-all S5Other match access-group 1 class-map match-all S5Telnet match protocol telnet match access-group 1 ! ! policy-map Prob5 class S5Telnet bandwidth 1000 class JPEG shape average 1000000 class S5Other police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 ! ! ! --More--  ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 speed auto half-duplex service-policy output Prob5 ! interface Serial1/0 no ip address encapsulation frame-relay ! interface Serial1/0.1 point-to-point --More--   R7#sh ru n\   n | i access match access-group 1 match access-group 1 access-list 1 permit 208.28.1.2 R7# R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#pri R7(config)#prio R7(config)#priority-list ? <1-16> Priority list number R7(config)#priority-list 1 ? default Set priority queue for unspecified datagrams interface Establish priorities for packets from a named interface protocol priority queueing by protocol queue-limit Set queue limits for priority queues R7(config)#priority-list 1 pro R7(config)#priority-list 1 protocol ? aarp AppleTalk ARP appletalk AppleTalk arp IP ARP bridge Bridging bstun Block Serial Tunnel cdp Cisco Discovery Protocol clns ISO CLNS clns_es ISO CLNS End System clns_is ISO CLNS Intermediate System cmns ISO CMNS compressedtcp Compressed TCP decnet DECnet decnet_node DECnet Node decnet_router-l1 DECnet Router L1 decnet_router-l2 DECnet Router L2 dlsw Data Link Switching (Direct encapsulation only) ip IP ipv6 IPV6 ipx Novell IPX llc2 llc2 pad PAD links pppoe PPP over Ethernet --More--   qllc qllc protocol rsrb Remote Source-Route Bridging snapshot Snapshot routing support stun Serial Tunnel R7(config)#priority-list 1 protocol ip ? high medium normal low R7(config)#priority-list 1 protocol ip high ? fragments Prioritize fragmented IP packets gt Prioritize packets greater than a specified size list To specify an access list lt Prioritize packets less than a specified size tcp Prioritize TCP packets 'to' or 'from' the specified port udp Prioritize UDP packets 'to' or 'from' the specified port R7(config)#priority-list 1 protocol ip high tcp ? <0-65535> Port number bgp Border Gateway Protocol (179) chargen Character generator (19) cmd Remote commands (rcmd, 514) daytime Daytime (13) discard Discard (9) domain Domain Name Service (53) echo Echo (7) exec Exec (rsh, 512) finger Finger (79) ftp File Transfer Protocol (21) ftp-data FTP data connections (20) gopher Gopher (70) hostname NIC hostname server (101) ident Ident Protocol (113) irc Internet Relay Chat (194) klogin Kerberos login (543) kshell Kerberos shell (544) login Login (rlogin, 513) lpd Printer service (515) nntp Network News Transport Protocol (119) pim-auto-rp PIM Auto-RP (496) --More--   pop2 Post Office Protocol v2 (109) pop3 Post Office Protocol v3 (110) smtp Simple Mail Transport Protocol (25) sunrpc Sun Remote Procedure Call (111) syslog Syslog (514) tacacs TAC Access Control System (49) talk Talk (517) telnet Telnet (23) time Time (37) uucp Unix-to-Unix Copy Program (540) whois Nicname (43) www World Wide Web (HTTP, 80) R7(config)#priority-list 1 protocol ip high tcp tel R7(config)#priority-list 1 protocol ip high tcp telnet ? R7(config)#priority-list 1 protocol ip high tcp telnet R7(config)#pri R7(config)#pri  riority-list 1 protocol ip high tcp telnet        www tcp www  tcp www  tcp www  tcp www l tcp wwwo tcp wwww tcp www R7(config)#priority-list 1 protocol ip low tcp www                         1 def R7(config)#priority-list 1 default med R7(config)#priority-list 1 default medium R7(config)#map-clas R7(config)#map-class fram R7(config)#map-class frame-relay Prob6 R7(config-map-class)#pri R7(config-map-class)#prio R7(config-map-class)#prio    fra R7(config-map-class)#frame-relay ? adaptive-shaping Adaptive traffic rate adjustment, Default = none bc Committed burst size (Bc), Default = 7000 bits be Excess burst size (Be), Default = 0 bits cir Committed Information Rate (CIR), Default = 56000 bps congestion Congestion management parameters custom-queue-list VC custom queueing end-to-end Configure frame-relay end-to-end VC parameters fair-queue VC fair queueing fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fragment fragmentation - Requires Frame Relay traffic-shaping to be configured at the interface level holdq Hold queue size for VC idle-timer Idle timeout for a SVC, Default = 120 sec interface-queue PVC interface queue parameters ip Assign a priority queue for RTP streams mincir Minimum acceptable CIR, Default = CIR/2 bps priority-group VC priority queueing tc Policing Measurement Interval (Tc) traffic-rate VC traffic rate voice voice options R7(config-map-class)#frame-relay pr R7(config-map-class)#frame-relay priority-group ? <1-16> Priority group number R7(config-map-class)#frame-relay priority-group 1 ? R7(config-map-class)#frame-relay priority-group 1 R7(config-map-class)#int s 1/0-.2 ^ % Invalid input detected at '^' marker. R7(config)#int s 1/0-.2.2  R7(config-subif)#do sh riu  in    un int s 1/0/./2/ sh run int s 10.2/ ^ % Invalid input detected at '^' marker. R7(config-subif)#do sh run int s 10.2/2/ /0.2 Building configuration... Current configuration : 157 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 702 end R7(config-subif)# frame-relay interface-dlci 702 R7(config-fr-dlci)#class Prob6 R7(config-fr-dlci)#int s 1/0 R7(config-if)#fram traff R7(config-if)#asz   ^Z R7#sh fram *Mar 2 02:29:52.413: %SYS-5-CONFIG_I: Configured from console by console R7#sh fram pvc PVC Statistics for interface Serial1/0 (Frame Relay DTE) Active Inactive Deleted Static Local 2 0 0 0 Switched 0 0 0 0 Unused 0 1 0 0 DLCI = 701, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = Serial1/0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 0 out bcast bytes 0 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 1d02h, last time pvc status changed 1d02h --More--   --More--  DLCI = 702, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.2 --More--   --More--   input pkts 5347 output pkts 5330 in bytes 909612 --More--   out bytes 892480 dropped pkts 0 in pkts dropped 0 --More--   out pkts dropped 0 out bytes dropped 0 --More--   in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 --More--   out BECN pkts 0 in DE pkts 0 out DE pkts 0 --More--   out bcast pkts 4767 out bcast bytes 832632 --More--   5 minute input rate 0 bits/sec, 0 packets/sec --More--   5 minute output rate 0 bits/sec, 0 packets/sec --More--   pvc create time 1d02h, last time pvc status changed 1d02h --More--   --More--  DLCI = 703, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.1 input pkts 3787 output pkts 5397 in bytes 341890 out bytes 896036 dropped pkts 18 in pkts dropped 18 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 4793 out bcast bytes 835556 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 1d02h, last time pvc status changed 1d02h R7#sh fram traff Frame Relay statistics: ARP requests sent 0, ARP replies sent 0 ARP request recvd 0, ARP replies recvd 0 R7#sh traff Interface Se1/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 701 56000 875 7000 0 125 875 - Interface Se1/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 703 56000 875 7000 0 125 875 - Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 702 56000 875 7000 0 125 875 - R7#sh prio ^ % Invalid input detected at '^' marker. R7#sh prio    ? aaa Show AAA values aal2 Show commands for AAL2 access-expression List access expression access-lists List access lists accounting Accounting data for active sessions adjacency Adjacent nodes alarm-interface Display information about a specific Alarm Interface Card aliases Display alias commands alignment Show alignment information alps Alps information appletalk AppleTalk information arap Show Appletalk Remote Access statistics arp ARP table async Information on terminal lines used as router interfaces auto Show Automation Template backhaul-session-manager Backhaul Session Manager information backup Backup status bcm560x BCM560x HW Table bgp BGP information bridge Bridge Forwarding/Filtering Database [verbose] --More--   R7#sh prio R7#sh prio? % Unrecognized command R7#sh prio    run ihnt s 1/0.nt s 1/0.  % Incomplete command. R7#sh run int s 1/0.2 Building configuration... Current configuration : 171 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 702 class Prob6 end R7#sh run int s 1/0.2   Building configuration... Current configuration : 113 bytes ! interface Serial1/0 no ip address encapsulation frame-relay no fair-queue frame-relay traffic-shaping end R7#sh run | b map-c map-class frame-relay Prob6 frame-relay priority-group 1 access-list 1 permit 208.28.1.2 priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www priority-list 1 default medium ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! --More--   R7# R7# R7#deb pri R7#deb prio R7#deb priority Priority output queueing debugging is on R7#180.40.7.13 62 Trying 180.40.7.162 ... Open R2# R2# R2# R7#sh p qu R7#sh queue p0r R7#sh queue p0r   R7#sh queue port-channel               ing s 1/0.2 ^ % Invalid input detected at '^' marker. R7#sh queueing s 1/0.2       ? interface custom custom queueing list configuration fair fair queueing configuration priority priority queueing list configuration random-detect random early detection configuration | Output modifiers R7#sh queueing pr R7#sh queueing priority ? | Output modifiers R7#sh queueing priority Current DLCI priority queue configuration: Current priority queue configuration: List Queue Args 1 medium default 1 high protocol ip tcp port telnet 1 low protocol ip tcp port www R7#sh queueing priority          int R7#sh queueing interface s 1/0.2 ^ % Invalid input detected at '^' marker. R7#sh queueing interface s 1/0.2   Interface Serial1/0 queueing strategy: priority Output queue utilization (queue/count) high/0 medium/0 normal/85 low/0 R7# [Resuming connection 1 to 180.40.7.162 ... ] R2# R2# R2# R2# R2# R2# R2# R2# RACK9AS>7 [Resuming connection 7 to r7 ... ] R2# R2# R2# R2# R7#sh queueing interface s 1/0 Interface Serial1/0 queueing strategy: priority Output queue utilization (queue/count) high/0 medium/0 normal/114 low/0 R7#in  config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0 R7(config-if)#pi ri R7(config-if)#priority-group 1 Cannot change interface queuing when Frame-Relay traffic-shapi ng is configured R7(config-if)#^Z R7#sh *Mar 2 02:36:17.953: %SYS-5-CONFIG_I: Configured from console by console R7#sh run|    | b 1/0 interface Serial1/0 no ip address encapsulation frame-relay no fair-queue frame-relay traffic-shaping ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network broadcast ip ospf hello-interval 30 ip ospf priority 0 frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 702 class Prob6 ! interface Serial1/1 no ip address shutdown --More--   R7#deb     deb pri R7#deb pri ip o R7#deb priority ? R7#deb priority            fram ? adjacency Frame Relay adjacency events detailed Detailed Debug: Only for Lab use dlsw Frame Relay dlsw end-to-end Frame-relay end-to-end VC information events Important Frame Relay packet events foresight Frame Relay router ForeSight support fragment Frame Relay fragment hpr Frame Relay APPN HPR ip Frame Relay Internet Protocol l3cc Frame Relay Layer 3 Call Control l3ie Frame Relay IE parsing/construction lapf Frame Relay SVC Layer 2 llc2 Frame Relay llc2 lmi LMI packet exchanges with service provider multilink Multilink Frame relay event/errors/packets nli Network Layer interface packet Frame Relay packets ppp PPP over Frame Relay rsrb Frame Relay rsrb switching Frame Relay switching vc-bundle FR vc-bundle events verbose Frame Relay --More--   R7#deb fram   R7#deb frame-relay ? adjacency Frame Relay adjacency events detailed Detailed Debug: Only for Lab use dlsw Frame Relay dlsw end-to-end Frame-relay end-to-end VC information events Important Frame Relay packet events foresight Frame Relay router ForeSight support fragment Frame Relay fragment hpr Frame Relay APPN HPR ip Frame Relay Internet Protocol l3cc Frame Relay Layer 3 Call Control l3ie Frame Relay IE parsing/construction lapf Frame Relay SVC Layer 2 llc2 Frame Relay llc2 lmi LMI packet exchanges with service provider multilink Multilink Frame relay event/errors/packets nli Network Layer interface packet Frame Relay packets ppp PPP over Frame Relay rsrb Frame Relay rsrb switching Frame Relay switching vc-bundle FR vc-bundle events verbose Frame Relay --More--   R7#deb frame-relay pack >? % Unrecognized command R7#deb frame-relay pack > ? interface Frame Relay Interface R7#deb frame-relay pack in ? BRI ISDN Basic Rate Interface Dialer Dialer interface MFR Multilink Frame Relay bundle interface Serial Serial Tunnel Tunnel interface R7#deb frame-relay pack in s 1/0.2 ? dlci frame-relay dlci R7#deb frame-relay pack in s 1/0.2 dl ? <16-1007> DLCI # R7#deb frame-relay pack in s 1/0.2 dl 702 ? R7#deb frame-relay pack in s 1/0.2 dl 702                                         [Resuming connection 1 to 180.40.7.162 ... ] R2# R2# R2#q [Connection to 180.40.7.162 closed by foreign host] R7# R7#deb pol R7#deb pol? % Unrecognized command R7#deb pol   ? IUA ISDN adaptation Layer options aaa AAA Authentication, Authorization and Accounting aal2_xgcpspi AAL2_XGCP Service Provider Interface. access-expression Boolean access expression adjacency adjacency alarm-interface Alarm Interface Card events all Enable all debugging alps ALPS debug information apple Appletalk information arap Appletalk Remote Access arp IP ARP and HP Probe transactions asnl Application Subscribe Notify Layer aspp ASPP information async Async interface information backhaul-session-manager Backhaul SM options backup Backup events bcm560x BCM560X L2 Driver bgp BGP information bri-interface bri network interface events bsc BSC information bstun BSTUN information call Call Information --More--   R7#deb ser R7#deb serial        qu R7#deb que R7#deb que? % Unrecognized command R7#deb que       shgrun |         run | b 1/0 interface Serial1/0 no ip address encapsulation frame-relay no fair-queue frame-relay traffic-shaping ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network broadcast ip ospf hello-interval 30 ip ospf priority 0 frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 702 class Prob6 ! interface Serial1/1 no ip address shutdown --More--  ! interface Serial1/2 no ip address shutdown ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address --More--   shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ! no ip http server no ip http secure-server ! ! map-class frame-relay Prob6 frame-relay priority-group 1 access-list 1 permit 208.28.1.2 priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www priority-list 1 default medium ! ! ! ! ! --More--   R7#h config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0 R7(config-if)#no fram traff R7(config-if)#int s 1/0.2 R7(config-subif)# frame-relay interface-dlci 702 R7(config-fr-dlci)#no class ProbProb6     6 R7(config-fr-dlci)#exit R7(config-subif)#fram ? class Define a map class on the interface de-group Associate a DE group with a DLCI interface-dlci Define a DLCI on an interface/subinterface inverse-arp Enable/disable FR inverse ARP ip Frame Relay Internet Protocol config commands map Map a protocol address to a DLCI address payload-compression Use payload compression priority-dlci-group Define a priority group of DLCIs vc-bundle configure a frame-relay vc-bundle R7(config-subif)#fram po R7(config-subif)#fram po ri R7(config-subif)#fram priority-dlci-group ? <1-16> Assign priority group R7(config-subif)#fram priority-dlci-group 1 ? <16-1007> DLCI for high priority R7(config-subif)#fram priority-dlci-group 1 702 R7(config-subif)# *Mar 2 02:41:49.994: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from FULL to DOWN, Neighbor Down: Interface down or detached R7(config-subif)#^Z R7# *Mar 2 02:41:54.906: %SYS-5-CONFIG_I: Configured from console by console R7#config t config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#i do sh run int s 1/0.2 Building configuration... Current configuration : 208 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 end R7(config)# *Mar 2 02:42:08.356: PQ: Serial1/0: cdp -> normal *Mar 2 02:42:08.356: PQ: Serial1/0: cdp -> normal *Mar 2 02:42:08.360: PQ: Serial1/0: cdp -> normal *Mar 2 02:42:08.360: PQ: Serial1/0: cdp -> normal *Mar 2 02:42:08.360: PQ: Serial1/0: cdp -> normal *Mar 2 02:42:08.360: PQ: Serial1/0: cdp -> normal *Mar 2 02:42:08.364: PQ: Serial1/0: ip -> normal R7(config)# *Mar 2 02:42:15.143: PQ: Serial1/0: ip -> normal *Mar 2 02:42:15.255: PQ: Serial1/0: ip -> normal *Mar 2 02:42:15.355: PQ: Serial1/0: ip -> normal *Mar 2 02:42:15.399: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from LOADING to FULL, Loading Done R7(config)# *Mar 2 02:42:15.900: PQ: Serial1/0: ip -> normal *Mar 2 02:42:15.932: PQ: Serial1/0: ip -> normal R7(config)#^Z R7#config tsh run | b 1/0 *Mar 2 02:42:19.534: %SYS-5-CONFIG_I: Configured from console by console R7#sh run | b 1/0config t sh queueing interface s 1/0.2priority s 1/0.2 180.40.7.162  Trying 180.40.7.162 ... Open R2# R2# R2# R2# R2# R2# R2# R2# R2# R2# R2# RACK9AS> [Resuming connection 7 to r7 ... ] R2# *Mar 2 02:42:38.365: PQ: Serial1/0: ip -> normal R2# R2# R2# R2# R2# R2# R2# R2# *Mar 2 02:42:54.307: PQ: Serial1/0: cdp -> normal *Mar 2 02:42:54.307: PQ: Serial1/0: cdp -> normal R2# R2# R2# R2# R2# *Mar 2 02:43:04.468: PQ: Serial1/0: ip -> normalq [Connection to 180.40.7.162 closed by foreign host] R7#configt Translating "configt" Translating "configt" % Unknown command or computer name, or unable to find computer address R7# *Mar 2 02:43:08.366: PQ: Serial1/0: ip -> normal R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0 R7(config-if)#shut R7(config-if)# *Mar 2 02:43:15.093: PQ: Serial1/0: cdp -> normal *Mar 2 02:43:15.093: PQ: Serial1/0: cdp -> normal R7(config-if)# *Mar 2 02:43:15.097: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on Serial1/0.1 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 02:43:15.113: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from FULL to DOWN, Neighbor Down: Interface down or detached R7(config-if)# *Mar 2 02:43:17.092: %LINK-5-CHANGED: Interface Serial1/0, changed state to administratively down *Mar 2 02:43:18.094: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to down R7(config-if)#no shut R7(config-if)# *Mar 2 02:43:23.431: PQ: Serial1/0: ip -> normal R7(config-if)# *Mar 2 02:43:25.426: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up *Mar 2 02:43:26.428: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up R7(config-if)#^Z R7#config tt  *Mar 2 02:43:39.878: %SYS-5-CONFIG_I: Configured from console by console R7#configt180.40.7.162 Trying 180.40.7.162 ... Open R2# R2# R2# R2# R2# R2# *Mar 2 02:43:45.439: PQ: Serial1/0: cdp -> normal *Mar 2 02:43:45.439: PQ: Serial1/0: cdp -> normal *Mar 2 02:43:45.439: PQ: Serial1/0: cdp -> normal *Mar 2 02:43:45.439: PQ: Serial1/0: cdp -> normal *Mar 2 02:43:45.443: PQ: Serial1/0: cdp -> normal *Mar 2 02:43:45.443: PQ: Serial1/0: cdp -> normal *Mar 2 02:43:45.447: PQ: Serial1/0: ip -> normal *Mar 2 02:43:47.983: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on Serial1/0.1 from LOADING to FULL, Loading Done R2# R2# R2# R2#q [Connection to 180.40.7.162 closed by foreign host] R7#co *Mar 2 02:43:54.309: PQ: Serial1/0: cdp -> normal *Mar 2 02:43:54.309: PQ: Serial1/0: cdp -> normal R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0 R7(config-if)#pri R7(config-if)#priority-group 1 R7(config-if)#^Z R7#config t180.40.7.162 *Mar 2 02:44:01.978: %SYS-5-CONFIG_I: Configured from console by console R7#180.40.7.162config t 180.40.7.162 Trying 180.40.7.162 ... *Mar 2 02:44:05.428: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 2 02:44:05.880: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:44:05.880: PQ: Serial1/0 output (Pk size/Q 48/0) *Mar 2 02:44:05.924: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:05.924: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:05.924: PQ: Serial1/0 output (Pk size/Q 68/1) *Mar 2 02:44:06.037: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:06.037: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:06.037: PQ: Serial1/0 output (Pk size/Q 308/1) *Mar 2 02:44:06.137: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:06.137: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:06.137: PQ: Serial1/0 output (Pk size/Q 68/1)Open *Mar 2 02:44:06.181: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from LOADING to FULL, Loading Done *Mar 2 02:44:06.682: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:06.682: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:06.682: PQ: Serial1/0 output (Pk size/Q 136/1) *Mar 2 02:44:06.714: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:06.714: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:06.714: PQ: Serial1/0 output (Pk size/Q 148/1) *Mar 2 02:44:06.722: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:06.722: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:06.734: PQ: Serial1/0 output (Pk size/Q 136/1) *Mar 2 02:44:06.734: PQ: Serial1/0 output (Pk size/Q 148/1) *Mar 2 02:44:06.786: PQ: Serial1/0: ip (tcp 23) -> high R2# *Mar 2 02:44:06.786: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 2 02:44:06.786: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:44:06.790: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:44:06.790: PQ: Serial1/0 output (Pk size/Q 56/0) *Mar 2 02:44:06.790: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 2 02:44:07.667: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:44:07.667: PQ: Serial1/0 output (Pk size/Q 47/0) *Mar 2 02:44:07.667: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:44:07.667: PQ: Serial1/0 output (Pk size/Q 47/0) *Mar 2 02:44:07.671: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:44:07.671: PQ: Serial1/0 output (Pk size/Q 53/0) *Mar 2 02:44:07.675: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:44:07.675: PQ: Serial1/0 output (Pk size/Q 47/0) *Mar 2 02:44:07.876: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:44:07.876: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 2 02:44:08.565: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:44:08.565: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 2 02:44:15.428: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 2 02:44:15.448: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:15.536: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 2 02:44:15.544: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 2 02:44:20.709: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:20.709: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:20.709: PQ: Serial1/0 output (Pk size/Q 84/1) *Mar 2 02:44:20.745: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:20.745: PQ: Serial1/0 output (Pk size/Q 84/1) *Mar 2 02:44:25.428: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 2 02:44:35.429: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 2 02:44:45.429: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 2 02:44:45.449: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:44:45.485: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 2 02:44:45.493: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 2 02:44:54.312: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 2 02:44:54.312: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 2 02:44:54.400: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 2 02:44:54.400: PQ: Serial1/0 output (Pk size/Q 356/1) *Mar 2 02:44:54.400: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 2 02:44:54.444: PQ: Serial1/0 output (Pk size/Q 356/1) *Mar 2 02:44:55.430: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 2 02:45:05.430: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 2 02:45:15.430: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 2 02:45:15.450: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:45:15.539: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 2 02:45:15.547: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 2 02:45:25.431: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 2 02:45:35.435: PQ: Serial1/0 output (Pk size/Q 13/0) R2# R2# *Mar 2 02:45:39.922: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:45:39.922: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 2 02:45:40.179: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:45:40.179: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 2 02:45:40.808: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:45:40.808: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 2 02:45:42.747: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:45:42.747: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:45:42.747: PQ: Serial1/0 output (Pk size/Q 88/1) *Mar 2 02:45:42.755: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:45:42.755: PQ: Serial1/0 output (Pk size/Q 88/1) *Mar 2 02:45:45.432: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 2 02:45:45.452: PQ: Serial1/0: ip (defaulting) -> medium *Mar 2 02:45:45.460: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 2 02:45:45.468: PQ: Serial1/0 output (Pk size/Q 84/0) R2# R2# *Mar 2 02:45:52.888: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:45:52.888: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 2 02:45:53.076: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:45:53.076: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 2 02:45:53.577: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:45:53.577: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 2 02:45:54.286: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:45:54.286: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 2 02:45:54.314: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 2 02:45:54.314: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 2 02:45:54.374: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 2 02:45:54.374: PQ: Serial1/0 output (Pk size/Q 356/1) *Mar 2 02:45:54.374: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 2 02:45:54.418: PQ: Serial1/0 output (Pk size/Q 356/1) *Mar 2 02:45:55.432: PQ: Serial1/0 output (Pk size/Q 13/0)q [Connection to 180.40.7.162 closed by foreign host] R7#u all All possible debugging has been turned off R7# *Mar 2 02:45:56.790: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:45:56.790: PQ: Serial1/0 output (Pk size/Q 45/0) *Mar 2 02:45:56.854: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:45:56.854: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 2 02:45:57.015: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:45:57.015: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 2 02:45:57.680: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:45:57.680: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 2 02:45:57.680: PQ: Serial1/0: ip (tcp 23) -> high *Mar 2 02:45:57.680: PQ: Serial1/0 output (Pk size/Q 44/0) R7#sh ru n|     n | b 1/0 interface Serial1/0 no ip address encapsulation frame-relay priority-group 1 ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network broadcast ip ospf hello-interval 30 ip ospf priority 0 frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 ! interface Serial1/1 no ip address shutdown ! --More--   R7#^Z R7# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Mar 2 R3#sh run int s11/2 ^ % Invalid input detected at '^' marker. R3#sh run int s11/2/2  1/2 Building configuration... Current configuration : 66 bytes ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 end R3#confi gt ^ % Invalid input detected at '^' marker. R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#access-list           class R3(config)#class-map Telnet R3(config-cmap)#match pro R3(config-cmap)#match protocol telnet R3(config-cmap)#exit R3(config)#clas R3(config)#class-map FTP R3(config-cmap)#match p       match pro ftp R3(config-cmap)#eixt ^ % Invalid input detected at '^' marker. R3(config-cmap)#exit R3(config)#exit R3#sh *Mar 2 02:52:39.170: %SYS-5-CONFIG_I: Configured from console by console R3#sh nbar ? % Unrecognized command R3#sh nbar      ip % Incomplete command. R3# nbar Translating "nbar" Translating "nbar" % Unknown command or computer name, or unable to find computer address R3# nbarsh ip nbar ? filter Show current NBAR's filter criteria pdlm Show currently installed PDLMs (PDL modules) port-map Show StILE Protocol Port Map protocol-discovery Show traffic classes and statistics resources Show memory configuration for tracking Stateful sessions trace Show NBAR's state-graph trace unclassified-port-stats Show NBAR's port statistics for unclassified packets R3#sh ip nbar port-map ? bgp Border Gateway Protocol citrix Citrix Traffic cuseeme CU-SeeMe desktop video conference custom-01 Custom protocol custom-01 custom-02 Custom protocol custom-02 custom-03 Custom protocol custom-03 custom-04 Custom protocol custom-04 custom-05 Custom protocol custom-05 custom-06 Custom protocol custom-06 custom-07 Custom protocol custom-07 custom-08 Custom protocol custom-08 custom-09 Custom protocol custom-09 custom-10 Custom protocol custom-10 dhcp Dynamic Host Configuration dns Domain Name Server lookup egp Exterior Gateway Protocol eigrp Enhanced Interior Gateway Routing Protocol exchange MS-RPC for Exchange fasttrack FastTrack Traffic - KaZaA, Morpheus, Grokster... finger Finger ftp File Transfer Protocol gnutella Gnutella Traffic - BearShare,LimeWire,Gnotella... --More--   R3#sh ip nbar port-map ftp port-map ftp tcp 21 R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip n % Incomplete command. R3(config)# R3(config)# R3(config)# R3(config)# R3(config)#b ip nbp    R3(config)#ip nbar ? pdlm PDL (protocol description language) Module port-map Map well-known port of a protocol to a new port resources Configure memory usage for tracking Stateful sessions R3(config)#ip nbar por R3(config)#ip nbar port-map ? bgp Border Gateway Protocol citrix Citrix Traffic cuseeme CU-SeeMe desktop video conference custom-01 Custom protocol custom-01 custom-02 Custom protocol custom-02 custom-03 Custom protocol custom-03 custom-04 Custom protocol custom-04 custom-05 Custom protocol custom-05 custom-06 Custom protocol custom-06 custom-07 Custom protocol custom-07 custom-08 Custom protocol custom-08 custom-09 Custom protocol custom-09 custom-10 Custom protocol custom-10 dhcp Dynamic Host Configuration dns Domain Name Server lookup egp Exterior Gateway Protocol eigrp Enhanced Interior Gateway Routing Protocol exchange MS-RPC for Exchange fasttrack FastTrack Traffic - KaZaA, Morpheus, Grokster... finger Finger ftp File Transfer Protocol gnutella Gnutella Traffic - BearShare,LimeWire,Gnotella... --More--   R3(config)#ip nbar port-map ftp ? tcp TCP ports R3(config)#ip nbar port-map ftp tcp ? <1-65535> Up to 16 port numbers separated by white-spaces R3(config)#ip nbar port-map ftp tcp 21 ? <1-65535> Up to 16 port numbers separated by white-spaces R3(config)#ip nbar port-map ftp tcp 21 20 R3(config)#ip nbar port-map ftp tcp 21 20         dip nbar port-map ftp oip nbar port-map ftp  ip nbar port-map ftp sip nbar port-map ftp hip nbar port-map ftp  ip nbar port-map ftp  port-map ftp tcp 21 20 R3(config)#pol R3(config)#policy-map Prob7 ? R3(config)#policy-map Prob7 R3(config-pmap)#class R3(config-pmap)#class Tl elk=  net R3(config-pmap-c)#ban R3(config-pmap-c)#bandwidth per R3(config-pmap-c)#bandwidth percent 24 R3(config-pmap-c)#exit R3(config-pmap)#class FTP R3(config-pmap-c)#ban per 51 R3(config-pmap-c)#exit R3(config-pmap)#class class-default R3(config-pmap-c)#ban R3(config-pmap-c)#bandwidth p R3(config-pmap-c)#bandwidth percent 25 R3(config-pmap-c)#int s 1/2 R3(config-if)#ser out Prob7 I/f Serial1/2 class class-default requested bandwidth 25%, available only 0% R3(config-if)#max R3(config-if)#max-reserved-bandwidth 100 R3(config-if)#max-reserved-bandwidth 100ser out Prob7  R3(config-if)#^Z R3#config t *Mar 2 02:57:36.497: %SYS-5-CONFIG_I: Configured from console by console R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ser out Prob7max-reserved-bandwidth 100ser out Prob7 int s 1/2  R3(config-if)#int s 1/2ser out Prob7max-reserved-bandwidth 100   ? <1-100> Max. reservable bandwidth as % of interface bandwidth R3(config-if)#max-reserved-bandwidth                        ^Z R3# *Mar 2 02:57:51.650: %SYS-5-CONFIG_I: Configured from console by console R3# R3# R3# R3#sh run | b class class-map match-all Telnet match protocol telnet class-map match-all FTP match protocol ftp ! ! policy-map Prob7 class Telnet bandwidth percent 24 class FTP bandwidth percent 51 class class-default bandwidth percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto --More--   speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay frame-relay map ip 180.40.7.65 307 broadcast tcp header-compression connections 20 frame-relay map ip 180.40.7.67 302 broadcast ! interface Serial1/1 no ip address shutdown ! --More--  interface Serial1/2 ip address 180.40.7.1 255.255.255.224 max-reserved-bandwidth 100 service-policy output Prob7 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address --More--   R3# RACK9AS>6 [Resuming connection 6 to r6 ... ] !!!!!!. Success rate is 99 percent (8785/8786), round-trip min/avg/max = 532/703/992 ms S6#x sh mls wo  qos map S6#sh mls qos maps Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 Dscp-dscp mutation map: Default DSCP Mutation Map: --More--   S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#mls qod s ? aggregate-policer Assign aggregate policer cos Configure CoS setting map Define QoS mapping min-reserve Configure min-reserve buffers S6(config)#mls qos ,ap   map ? cos-dscp Map COS to DSCP dscp-cos Map DSCP to COS dscp-mutation Configure dscp-mutation map dscp-switch-priority Map DSCP to switch priority ip-prec-dscp DSCP values for IP precedences 0-7 policed-dscp Map DSCP to policed DSCP S6(config)#mls qos map ip-prec-dscp ? <0-63> 8 dscp values separated by spaces S6(config)#mls qos map ip-prec-dscp 0ggggggggggggggggggggggggggggg \                              1416 1616 28 32 40 48 56 S6(config)#mls qqos   os QoS: ensure flow-control on all interfaces are OFF for proper operation. S6(config)#int s   fa 0/7 S6(config-if)#traff     mls qos tru S6(config-if)#mls qos trust ? cos Classify by packet COS device trusted device class dscp Classify by packet DSCP ip-precedence Classify by packet IP precedence S6(config-if)#mls qos trust ip[ S6(config-if)#mls qos trust ip[  S6(config-if)#mls qos trust ip-precedence S6(config-if)#mls qos trust ip-precedence int fa 0/7 mls qos  map ip-prec-dscp 0 14 16 28 32 40 48 56nmls qos map ip-prec-dscp 0 14 16 28 32 40 48 56omls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 S6(config)# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#class-map match-all dscp26 R3(config-cmap)# match dscp af31 R3(config-cmap)#class-map match-all dscp24 R3(config-cmap)# match dscp cs3 R3(config-cmap)#class-map match-all dscp28 R3(config-cmap)# match dscp af32 R3(config-cmap)#class-map match-all prec3 R3(config-cmap)# match ip precedence 3 R3(config-cmap)#policy-map test R3(config-pmap)# class dscp24 R3(config-pmap-c)# class dscp26 R3(config-pmap-c)# class dscp28 R3(config-pmap-c)# class prec3 R3(config-pmap-c)#interface FastEthernet0/0 R3(config-if)# service-policy input test R3(config-if)# R3(config-if)#^Z R3# *Mar 2 03:13:22.127: %SYS-5-CONFIG_I: Configured from console by console R3# RACK9AS>5 [Resuming connection 5 to r5 ... ] S5#5000100000080.40.7.129pin 180.40.7.129000000 5000  ping 19 80.40.7.129 rep 1000000 Type escape sequence to abort. Sending 1000000, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!! RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 2935 packets, 334590 bytes 5 minute offered rate 9000 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   Class-map: class-default (match-any) 12 packets, 1176 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# RACK9AS>7 [Resuming connection 7 to r7 ... ] R7# RACK9AS>6 [Resuming connection 6 to r6 ... ] S6(config)#no mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56no mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 \mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56  S6(config)# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 24431 packets, 2785134 bytes 5 minute offered rate 79000 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 2647 packets, 301758 bytes 5 minute offered rate 8000 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   R3# RACK9AS>5 6 [Resuming connection 6 to r6 ... ] S6(config)#mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56                                               ^Z S6# 1d03h: %SYS-5-CONFIG_I: Configured from console by console S6#sh ru n|     n | b mls qos mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 no switchport ip address 20.10.2.1 255.255.255.0 ! interface FastEthernet0/2 --More--   no switchport ip address 20.10.1.2 255.255.255.0 ! interface FastEthernet0/3 switchport mode dynamic desirable ! interface FastEthernet0/4 switchport access vlan 10 switchport mode dynamic desirable ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport mode dynamic desirable ! interface FastEthernet0/7 switchport access vlan 10 switchport mode dynamic desirable mls qos trust ip-precedence ! interface FastEthernet0/8 switchport mode dynamic desirable --More--   S6#configt Translating "configt" % Unknown command or computer name, or unable to find computer address S6#iont    config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 0/9 S6(config-if)#mls qos ? cos Configure interface COS parameters dscp-mutation Apply DSCP-DSCP map to DSCP trusted port monitor Collect QoS statistics trust Configure trust state of interface S6(config-if)#mls qos tr ? cos Classify by packet COS device trusted device class dscp Classify by packet DSCP ip-precedence Classify by packet IP precedence S6(config-if)#mls qos tr dscp ? pass-through dscp pass-through mode S6(config-if)#mls qos tr dscp                 ^Z S6# 1d03h: %SYS-5-CONFIG_I: Configured from console by console S6# RACK9AS>4 [Resuming connection 4 to r4 ... ] *M R4#sh run Building configuration... Current configuration : 986 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R4 ! boot-start-marker boot-end-marker ! ! no aaa new-model ip subnet-zero ! ! ip cef no ip domain lookup ! ip audit po max-events 100 ! --More--  ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 100.1.1.1 255.255.255.0 ! interface FastEthernet0/0 ip address 180.40.7.130 255.255.255.224 duplex auto speed auto --More--  ! interface ATM1/0 no ip address shutdown no atm ilmi-keepalive ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip local policy route-map Prob2 no ip http server no ip http secure-server ip classless ! ! access-list 100 permit icmp any any echo access-list 100 permit icmp any any echo-reply ! route-map Prob2 permit 10 match ip address 100 set ip next-hop 180.40.7.129 ! --More--   R4# RACK9AS>7 [Resuming connection 7 to r7 ... ] R7#sh run | i access-l access-list 1 permit 208.28.1.2 R7# R7# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh run | ip nb R3#sh run | ip nb ip nbI ip nb ip nbar port-map ftp tcp 21 20 R3# R3#sh run Building configuration... Current configuration : 2807 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service tcp-small-servers ! hostname R3 ! boot-start-marker boot-end-marker ! logging buffered 4096 debugging ! no network-clock-participate slot 1 no network-clock-participate wic 0 no aaa new-model ip subnet-zero ! ! ip nbar port-map ftp tcp 21 20 --More--   R3# RACK9AS>5 [Resuming connection 5 to r5 ... ] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! S5#confi gt ^ % Invalid input detected at '^' marker. S5#int   confi gt ^ % Invalid input detected at '^' marker. S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int fa 0./3   /3 S5(config-if)#wrr S5(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id min-reserve Configure min-reserve level S5(config-if)#wrr-queue           ^Z S5# 1d04h: %SYS-5-CONFIG_I: Configured from console by console S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int fa 0/1 3 S5(config-if)#pri S5(config-if)#priority-queue ? out egress priority queue S5(config-if)#priority-queue                ^Z S5# 1d04h: %SYS-5-CONFIG_I: Configured from console by console S5#sh     RACK9AS>1 [Resuming connection 1 to r1 ... ] R1#sh ip int Ethernet0/0 is administratively down, line protocol is down Internet protocol processing disabled Serial0/0 is administratively down, line protocol is down Internet protocol processing disabled Ethernet0/1 is up, line protocol is up Internet address is 20.10.2.2/24 Broadcast address is 255.255.255.255 Address determined by setup command MTU is 1500 bytes Helper address is not set Directed broadcast forwarding is disabled Multicast reserved groups joined: 224.0.0.5 224.0.0.6 Outgoing access list is not set Inbound access list is not set Proxy ARP is enabled Local Proxy ARP is disabled Security level is default Split horizon is enabled ICMP redirects are always sent ICMP unreachables are always sent ICMP mask replies are never sent IP fast switching is enabled IP fast switching on the same interface is disabled --More--   R1# R1# RACK9AS>6 5 [Resuming connection 5 to r5 ... ] S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#mls p qos ? aggregate-policer Assign aggregate policer cos Configure CoS setting map Define QoS mapping min-reserve Configure min-reserve buffers S5(config)#mls qos map ? cos-dscp Map COS to DSCP dscp-cos Map DSCP to COS dscp-mutation Configure dscp-mutation map dscp-switch-priority Map DSCP to switch priority ip-prec-dscp DSCP values for IP precedences 0-7 policed-dscp Map DSCP to policed DSCP S5(config)#mls qos map dsc S5(config)#mls qos map dscp-? dscp-cos dscp-mutation dscp-switch-priority S5(config)#mls qos map dscp-m S5(config)#mls qos map dscp-mutation ? WORD DSCP mutation map name S5(config)#mls qos map dscp-mutation Prob9 ? <0-63> DSCP values separated by spaces (up to 8 values total) S5(config)#mls qos map dscp-mutation Prob9 14 ? <0-63> DSCP values separated by spaces (up to 8 values total) to Specify egress DSCPs S5(config)#mls qos map dscp-mutation Prob9 14 to 12 S5(config)#mls qos map dscp-mutation Prob9 14 to 12        28 26t26o26 26 S5(config)#int fa 0/24 S5(config-if)#mls qos ? cos Configure interface COS parameters dscp-mutation Apply DSCP-DSCP map to DSCP trusted port monitor Collect QoS statistics trust Configure trust state of interface S5(config-if)#mls qos dsc S5(config-if)#mls qos dscp-mutation ? WORD dscp-mutation name S5(config-if)#mls qos dscp-mutation Prob9 S5(config-if)#\ mls qos dscp-mutation Prob9nmls qos dscp-mutation Prob9omls qos dscp-mutation Prob9 mls qos dscp-mutation Prob9 S5(config-if)#it nt fa 0/3 S5(config-if)#int fa 0/3no mls qos dscp-mutation Prob9mls qos dscp-mutation Prob9  S5(config-if)#mls qos       exit S5(config)#mls qos QoS: ensure flow-control on all interfaces are OFF for proper operation. S5(config)#int fa 0/24 S5(config-if)#mls qos tr S5(config-if)#mls qos trust d S5(config-if)#mls qos trust ds S5(config-if)#mls qos trust dscp c \ ^ % Invalid input detected at '^' marker. S5(config-if)#mls qos trust dscp \  S5(config-if)#^Z S5#config t gtping 180.40.7.129 rep 1000000 1d06h: %SYS-5-CONFIG_I: Configured from console by console S5#ping 180.40.7.129 rep 10000005000 ping 180.40.7.129 rep 1000000 Type escape sequence to abort. Sending 1000000, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh run | I ip nbpol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 24431 packets, 2785134 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 978097 packets, 111503058 bytes 5 minute offered rate 4000 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   R3#clea pol ? % Unrecognized command R3#clea pol     ? aaa Clear AAA values access-list Clear access list statistical information access-template Access-template adjacency Adjacent nodes alps Clear Alps appletalk Reset AppleTalk information arp-cache Clear the entire ARP cache backhaul-session-manager Backhaul Session Manager information bgp Clear BGP connections bridge Reset bridge forwarding cache bsc Clear counters in command bstun Clear counters displayed in show bstun call Call cdp Reset cdp information cef CEF information related to linecard clns CLNS cns CNS agents counters Clear counters on one or all interfaces crypto Encryption subsystem decnet Reset DECnet information dialer Clear dialer statistics dlsw Data Link Switching (DLSw) --More--   drip Clear drip dspfarm clear DSPFARM frame-relay Clear Frame Relay information funi FUNI information h323 Clear H.323 protocol related information host Delete host table entries interface Clear the hardware logic on an interface ip IP ipv6 IPv6 ipx Reset Novell/IPX information isis Clear IS-IS data structures kerberos Clear Kerberos Values lane lane line Reset a terminal line logging Clear logging buffer mac-address-table MAC forwarding table memory Memory counters mgcp clear Media Gateway Control Protocol mpls Reset MPLS statistical information mpoa MPOA clear commands mrcp Clear MRCP statistics ncia Native Client Interface Architecture (NCIA) netbios-cache Clear the entire NetBIOS name cache --More--   R3#clea ip ? access-list Clear access list statistical information access-template Access-template accounting Clear IP accounting database arp IP ARP table audit Clear IDS information auth-proxy Clear the auth-proxy info bgp Clear BGP connections cache Delete cache table entries cef Cisco Express Forwarding info cgmp Cisco Group Management Protocol (CGMP) dhcp Delete items from the DHCP database director Clear director information drp Clear director responder counters dvmrp DVMRP eigrp Clear IP-EIGRP flow Clear flow information http Clear HTTP parameters igmp IGMP clear commands mobile IP Mobility mrm IP Multicast Routing Monitor clear commands mroute Delete multicast route table entries msdp Multicast Source Discovery Protocol (MSDP) --More--   mtag Clear multicast TIB entries nat Clear NAT nbar NBAR: Network-Based Application Recognition nhrp NHRP cache ospf OSPF clear commands pgm PGM Reliable Transport Protocol pim PIM prefix-list Prefix-list redirect Redirect cache route Delete route table entries rsvp RSVP rtp RTP/UDP/IP header-compression statistics sap Session Announcement Protocol cache sctp Clear SCTP information snat Clear SNAT tcp TCP/UDP/IP header-compression statistics translation Clear translation trigger-authentication Clear trigger-authentication host table urlfilter Clear the urlfilter info wccp Reset wccp information R3#clea ip      a int cou ^ % Invalid input detected at '^' marker. R3#clea int cou     ? Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Null Null interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-TokenRing Virtual TokenRing range Clear all interfaces within an inclusive range R3#clea int fa 0/0 R3#clea int fa 0/0 ? R3#clea int fa 0/0                 clea int cou sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 24431 packets, 2785134 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 996760 packets, 113630640 bytes 5 minute offered rate 64000 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   Class-map: class-default (match-any) 2138 packets, 209784 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 24431 packets, 2785134 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 1009264 packets, 115056096 bytes 5 minute offered rate 91000 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   R3# RACK9AS>5 [Resuming connection 5 to r5 ... ] !!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!. Success rate is 99 percent (43429/43430), round-trip min/avg/max = 1/2/80 ms S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int s fa 0- /3 S5(config-if)#int fa 0/3mls qos trust dscp nmls qos trust dscp omls qos trust dscp  mls qos trust dscp  S5(config-if)#no mls qos trust dscp int fa 0/3 mls qos trust dscp \int fa 0/24 mls qos exit mls qos dscp-mutation Prob9nmls qos dscp-mutation Prob9omls qos dscp-mutation Prob9 mls qos dscp-mutation Prob9 S5(config-if)#int fa 0/. 24 S5(config-if)#int fa 0/24no mls qos dscp-mutation Prob9no mls qos dscp-mutation Prob9  mls qos dscp-mutation Prob9  S5(config-if)#^Z S5#config tping 180.40.7.129 rep 1000000 1d06h: %SYS-5-CONFIG_I: Configured from console by console S5#ping 180.40.7.129 rep 1000000 Type escape sequence to abort. Sending 1000000, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!! RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 24431 packets, 2785134 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 1421 packets, 161994 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 1018999 packets, 116165886 bytes 5 minute offered rate 118000 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 24431 packets, 2785134 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 3115 packets, 355110 bytes 5 minute offered rate 8000 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 1018999 packets, 116165886 bytes 5 minute offered rate 112000 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   Class-map: class-default (match-any) 2158 packets, 211724 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# RACK9AS>5 [Resuming connection 5 to r5 ... ] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!. Success rate is 99 percent (21780/21781), round-trip min/avg/max = 1/2/52 ms S5#sh run | b mls qwo  os mls qos map dscp-mutation Prob9 14 to 12 mls qos map dscp-mutation Prob9 28 to 26 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 switchport mode dynamic desirable ! interface FastEthernet0/2 --More--   switchport mode dynamic desirable ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable ! interface FastEthernet0/4 switchport mode dynamic desirable ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport mode dynamic desirable ! interface FastEthernet0/7 no switchport ip address 208.28.1.2 255.255.255.0 ! interface FastEthernet0/8 switchport mode dynamic desirable ! interface FastEthernet0/9 --More--   switchport mode dynamic desirable ! interface FastEthernet0/10 switchport mode dynamic desirable ! interface FastEthernet0/11 switchport mode dynamic desirable ! interface FastEthernet0/12 switchport mode dynamic desirable ! interface FastEthernet0/13 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/14 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/15 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! --More--  interface FastEthernet0/16 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/17 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/18 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/19 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/20 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/21 switchport mode dynamic desirable mls qos dscp-mutation Prob9 --More--  ! interface FastEthernet0/22 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/23 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk mls qos trust dscp mls qos dscp-mutation Prob9 ! interface GigabitEthernet0/1 switchport mode dynamic desirable ! interface GigabitEthernet0/2 switchport mode dynamic desirable ! interface Vlan1 no ip address --More--   S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#do sh access-list S5(config)#access-list 1 per 100.1.1.1 S5(config)#access-list 1 per 180.40.7.130 S5(config)#class S5(config)#class-map R4 S5(config-cmap)#match acc S5(config-cmap)#match access-group 1 S5(config-cmap)#ex  exit S5(config)#pol S5(config)#policy-map S5(config)#policy-map Se  Prob10 S5(config-pmap)#class R4 S5(config-pmap-c)#set co S5(config-pmap-c)#set cos 4 S5(config-pmap-c)#int     Pxo   do shru     run | b cl S5(config-pmap-c)#do sh run | b cl class-map match-all R4 match access-group 1 ! ! policy-map Prob10 class R4 set cos 4 ! ! ! interface FastEthernet0/1 switchport mode dynamic desirable ! interface FastEthernet0/2 switchport mode dynamic desirable ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable ! interface FastEthernet0/4 switchport mode dynamic desirable ! --More--   S5(config-pmap-c)#do shr  run | i access-l access-list 1 permit 180.40.7.130 access-list 1 permit 100.1.1.1 S5(config-pmap-c)# S5# 1d06h: %SYS-5-CONFIG_I: Configured from console by console S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#no access-list 1 S5(config)#no class S5(config)#no class-map R4 Class-map R4 is being used S5(config)#no pol S5(config)#no policy-maPro   p Porb10 S5(config)#no policy-map Porb10class-map R4 policy-map Porb10b10 b10 rb10ob10 S5(config)#no policy-map Prob10orb10class-map R4  S5(config)# RACK9AS>6 [Resuming connection 6 to r6 ... ] S6#confgi    ig t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#class-map match-all R4 S6(config-cmap)# match access-group 1 S6(config-cmap)#! S6(config-cmap)#! S6(config-cmap)#policy-map Prob10 S6(config-pmap)# class R4 S6(config-pmap-c)#set dscp 32 S6(config-pmap-c)# S6(config-pmap-c)#access-list 1 permit 180.40.7.130 S6(config)#access-list 1 permit 100.1.1.1 S6(config)#do sh run |   i access-list access-list 1 permit 180.40.7.130 access-list 1 permit 100.1.1.1 S6(config)#int fa 0/4 S6(config-if)#ne  ser S6(config-if)#service-policy in Prob10 S6(config-if)#do sh mls qwo  os QoS is enabled S6(config-if)#do sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 14 16 28 32 40 48 56 Dscp-dscp mutation map: Default DSCP Mutation Map: --More--   S6(config-if)#do sh mls qos map do sh mls qos map service-policy in Prob10nservice-policy in Prob10oservice-policy in Prob10 service-policy in Prob10 S6(config-if)#NO class-map match-all R4 Class-map R4 is being used S6(config)#! S6(config)#! S6(config)#no policy-map Prob10 S6(config)# S6(config)#no access-list 1 permit 180.40.7.130 S6(config)#NO class-map match-all R4 S6(config)#! S6(config)#! S6(config)#no policy-map Prob10 S6(config)# S6(config)#no access-list 1 permit 180.40.7.130 S6(config)# S6(config)#no access-list 1 permit 180.40.7.130policy-map Prob10 no policy-map Prob10  policy-map Prob10  S6(config-pmap)#ca lass S6(config-pmap)#class class-default S6(config-pmap-c)#set dsc S6(config-pmap-c)#set dscp 32 S6(config-pmap-c)#int fa 0/3 S6(config-if)#serv S6(config-if)#service-policy in Prob10 S6(config-if)#service-policy in Prob10nservice-policy in Prob10oservice-policy in Prob10 service-policy in Prob10 S6(config-if)#no service-policy in Prob10service-policy in Prob10 int fa 0/3  4 S6(config-if)#int fa 0/4no service-policy in Prob10 Service Policy Prob10 not attached S6(config-if)#no service-policy in Prob10no service-policy in Prob10  service-policy in Prob10  S6(config-if)#^Z S6# 1d06h: %SYS-5-CONFIG_I: Configured from console by console S6# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 24431 packets, 2785134 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 21781 packets, 2483034 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 1018999 packets, 116165886 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   --More--   Class-map: class-default (match-any) --More--   2363 packets, 231838 bytes --More--   5 minute offered rate 0 bps, drop rate 0 bps --More--   Match: any R3# R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#clas R3(config)#class-map DSC   dscp32 R3(config-cmap)#match dscp 32 R3(config-cmap)#pol R3(config-cmap)#pol   exity ^ % Invalid input detected at '^' marker. R3(config-cmap)#pol   exit R3(config)#pol R3(config)#policy-map test R3(config-pmap)#class dscp32 R3(config-pmap-c)#^Z R3#config tsh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 24431 packets, 2785134 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 21781 packets, 2483034 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 1018999 packets, 116165886 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More-- *Mar 2 06:20:08.418: %SYS-5-CONFIG_I: Configured from console by console --More--   Class-map: dscp32 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp cs4 (32) Class-map: class-default (match-any) 2371 packets, 232622 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# RACK9AS>5 [Resuming connection 5 to r5 ... ] S5(config)#no class-map R4^Z S5#config tsh run | b mls qos 1d06h: %SYS-5-CONFIG_I: Configured from console by console S5#sh run | b mls qosping 180.40.7.129 rep 1000000 rep 1000000  rep 1000000 3 rep 10000000 rep 1000000 Type escape sequence to abort. Sending 1000000, 100-byte ICMP Echos to 180.40.7.130, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 24431 packets, 2785134 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 21781 packets, 2483034 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 1018999 packets, 116165886 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   Class-map: dscp32 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp cs4 (32) Class-map: class-default (match-any) 3122 packets, 318172 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#q  RACK9AS>4 [Resuming connection 4 to r4 ... ] *Mar.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.548: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.552: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.552: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.552: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.556: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.560: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.560: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.560: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.560: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.564: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.564: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.564: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.564: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.568: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.572: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.572: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.572: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.576: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.576: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.576: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.576: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.580: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.580: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.584: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.584: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.588: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.588: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.588: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.588: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.592: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.592: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.592: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.596: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.600: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.600: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.600: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.600: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.604: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.604: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.604: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.604: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.608: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.608: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.612: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.612: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.616: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.616: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.616: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.616: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.620: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.624: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.624: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.624: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.628: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.628: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.628: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.628: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.632: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.632: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.632: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.636: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.640: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.640: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.640: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.640: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.644: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.644: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.644: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.644: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.648: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.652: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.652: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.652: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.656: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.656: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.656: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.656: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.660: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.664: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.664: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.664: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.668: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.668: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.668: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.668: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.672: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.672: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.672: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.676: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:50.680: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:50.680: IP: route map Prob2, item 10, permit *Mar 2 06:22:50.680: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:50.680: IP: local to FastEthernet0/0 180.40.7.129 *Mar RACK9AS>5 [Resuming connection 5 to r5 ... ] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!. Success rate is 99 percent (5909/5910), round-trip min/avg/max = 4/5/36 ms S5#x                   RACK9AS>4 [Resuming connection 4 to r4 ... ] .40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), le *Mar 2 06:22:52.440: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:52.440: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:52.444: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:52.448: IP: route map Prob2, item 10, permit *Mar 2 06:22:52.448: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:52.448: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:52.452: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:52.452: IP: route map Prob2, item 10, permit *Mar 2 06:22:52.452: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:52.452: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:52.460: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:52.460: IP: route map Prob2, item 10, permit *Mar 2 06:22:52.460: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:52.460: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:53.452: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:53.452: IP: route map Prob2, item 10, permit *Mar 2 06:22:53.456: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:53.456: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:53.460: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:53.460: IP: route map Prob2, item 10, permit *Mar 2 06:22:53.460: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:53.460: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:54.448: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:54.448: IP: route map Prob2, item 10, permit *Mar 2 06:22:54.452: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:54.452: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:54.456: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:54.456: IP: route map Prob2, item 10, permit *Mar 2 06:22:54.456: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:54.456: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:54.460: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:54.460: IP: route map Prob2, item 10, permit *Mar 2 06:22:54.460: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:54.464: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:54.468: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:54.468: IP: route map Prob2, item 10, permit *Mar 2 06:22:54.472: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:54.472: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:55.456: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:55.456: IP: route map Prob2, item 10, permit *Mar 2 06:22:55.456: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:55.456: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:55.460: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:55.460: IP: route map Prob2, item 10, permit *Mar 2 06:22:55.460: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:55.464: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:56.464: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:56.464: IP: route map Prob2, item 10, permit *Mar 2 06:22:56.468: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:56.468: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:56.472: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:56.472: IP: route map Prob2, item 10, permit *Mar 2 06:22:56.472: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:56.472: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:57.472: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:57.476: IP: route map Prob2, item 10, permit *Mar 2 06:22:57.476: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:57.476: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:57.480: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:57.480: IP: route map Prob2, item 10, permit *Mar 2 06:22:57.480: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:57.480: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:57.488: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:57.488: IP: route map Prob2, item 10, permit *Mar 2 06:22:57.488: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:57.488: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:57.492: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:57.496: IP: route map Prob2, item 10, permit *Mar 2 06:22:57.496: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:57.496: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:58.480: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:58.480: IP: route map Prob2, item 10, permit *Mar 2 06:22:58.480: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:58.480: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:58.484: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:58.484: IP: route map Prob2, item 10, permit *Mar 2 06:22:58.484: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:58.484: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:59.480: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:59.480: IP: route map Prob2, item 10, permit *Mar 2 06:22:59.480: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:59.480: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:22:59.484: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:22:59.484: IP: route map Prob2, item 10, permit *Mar 2 06:22:59.484: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:22:59.484: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:00.480: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:00.480: IP: route map Prob2, item 10, permit *Mar 2 06:23:00.480: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:00.484: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:00.488: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:00.488: IP: route map Prob2, item 10, permit *Mar 2 06:23:00.488: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:00.488: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:00.492: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:00.492: IP: route map Prob2, item 10, permit *Mar 2 06:23:00.492: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:00.492: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:00.500: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:00.500: IP: route map Prob2, item 10, permit *Mar 2 06:23:00.500: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:00.504: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:01.492: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:01.492: IP: route map Prob2, item 10, permit *Mar 2 06:23:01.492: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:01.492: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:01.496: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:01.496: IP: route map Prob2, item 10, permit *Mar 2 06:23:01.496: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:01.500: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:02.496: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:02.496: IP: route map Prob2, item 10, permit *Mar 2 06:23:02.496: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:02.496: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:02.500: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:02.504: IP: route map Prob2, item 10, permit *Mar 2 06:23:02.504: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:02.504: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:02.512: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:02.512: IP: route map Prob2, item 10, permit *Mar 2 06:23:02.512: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:02.512: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:02.516: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:02.516: IP: route map Prob2, item 10, permit *Mar 2 06:23:02.516: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:02.516: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:03.492: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:03.492: IP: route map Prob2, item 10, permit *Mar 2 06:23:03.492: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:03.492: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:03.496: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:03.500: IP: route map Prob2, item 10, permit *Mar 2 06:23:03.500: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:03.500: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:04.504: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:04.504: IP: route map Prob2, item 10, permit *Mar 2 06:23:04.504: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:04.504: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:04.508: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:04.508: IP: route map Prob2, item 10, permit *Mar 2 06:23:04.508: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:04.508: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:05.512: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:05.512: IP: route map Prob2, item 10, permit *Mar 2 06:23:05.512: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:05.512: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:05.520: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:05.520: IP: route map Prob2, item 10, permit *Mar 2 06:23:05.520: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:05.520: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:05.524: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:05.528: IP: route map Prob2, item 10, permit *Mar 2 06:23:05.528: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:05.528: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:05.532: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:05.532: IP: route map Prob2, item 10, permit *Mar 2 06:23:05.532: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:05.532: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:06.500: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:06.500: IP: route map Prob2, item 10, permit *Mar 2 06:23:06.500: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:06.500: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:06.512: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:06.512: IP: route map Prob2, item 10, permit *Mar 2 06:23:06.512: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:06.512: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:07.516: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:07.516: IP: route map Prob2, item 10, permit *Mar 2 06:23:07.516: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), le RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 24431 packets, 2785134 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 21781 packets, 2483034 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 1018999 packets, 116165886 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   Class-map: dscp32 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp cs4 (32) Class-map: class-default (match-any) 8295 packets, 907734 bytes 5 minute offered rate 21000 bps, drop rate 0 bps Match: any R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] , len 100, policy match *Mar 2 06:23:07.524: IP: route map Prob2, item 10, perm 10, permit *Mar 2 06:23:19.572: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:19.572: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:19.576: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:19.576: IP: route map Prob2, item 10, permit *Mar 2 06:23:19.576: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:19.576: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:20.576: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:20.576: IP: route map Prob2, item 10, permit *Mar 2 06:23:20.576: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:20.576: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:20.580: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:20.584: IP: route map Prob2, item 10, permit *Mar 2 06:23:20.584: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:20.584: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:21.576: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:21.576: IP: route map Prob2, item 10, permit *Mar 2 06:23:21.580: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:21.580: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:21.584: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:21.584: IP: route map Prob2, item 10, permit *Mar 2 06:23:21.584: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:21.584: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:21.592: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:21.592: IP: route map Prob2, item 10, permit *Mar 2 06:23:21.592: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:21.592: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:21.596: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:21.600: IP: route map Prob2, item 10, permit *Mar 2 06:23:21.600: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:21.600: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:22.580: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:22.580: IP: route map Prob2, item 10, permit *Mar 2 06:23:22.580: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:22.580: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:22.584: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:22.584: IP: route map Prob2, item 10, permit *Mar 2 06:23:22.584: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:22.588: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:23.584: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:23.584: IP: route map Prob2, item 10, permit *Mar 2 06:23:23.584: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:23.584: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:23.588: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:23.588: IP: route map Prob2, item 10, permit *Mar 2 06:23:23.588: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:23.588: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:23.592: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:23.596: IP: route map Prob2, item 10, permit *Mar 2 06:23:23.596: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:23.596: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:23.604: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:23.604: IP: route map Prob2, item 10, permit *Mar 2 06:23:23.604: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:23.604: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:24.452: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:24.456: IP: route map Prob2, item 10, permit *Mar 2 06:23:24.456: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:24.456: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 06:23:24.460: IP: s=180.40.7.130 (local), d=208.28.1.2, len 100, policy match *Mar 2 06:23:24.460: IP: route map Prob2, item 10, permit *Mar 2 06:23:24.460: IP: s=180.40.7.130 (local), d=208.28.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 06:23:24.460: IP: local to FastEthernet0/0 180.40.7.129 R4# R4#u all All possible debugging has been turned off R4# R4# R4#ping 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 24431 packets, 2785134 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 21781 packets, 2483034 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 1018999 packets, 116165886 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   Class-map: dscp32 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp cs4 (32) Class-map: class-default (match-any) 8306 packets, 908892 bytes 5 minute offered rate 15000 bps, drop rate 0 bps Match: any R3# RACK9AS>6 [Resuming connection 6 to r6 ... ] S6#sh pol int fa 0/4 % Ambiguous command: "sh pol int fa 0/4" S6#sh pol int fa 0/40/4            S6#sh policy-map S6#sh policy-map int fa 0/4 FastEthernet0/4 Service-policy input: Prob10 Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any 0 packets, 0 bytes 5 minute rate 0 bps S6#sh run int fa 0/4 Building configuration... Current configuration : 124 bytes ! interface FastEthernet0/4 switchport access vlan 10 switchport mode dynamic desirable service-policy input Prob10 end S6#s   sh pol S6#sh policy-map S6#sh policy-map Policy Map Prob10 Class class-default set dscp cs4 S6#configt Translating "configt" % Unknown command or computer name, or unable to find computer address S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 0/4 S6(config-if)#mls qos tru S6(config-if)#mls qos trust ds S6(config-if)#mls qos trust dscp S6(config-if)# RACK9AS>5 [Resuming connection 5 to r5 ... ] S5#ping 180.40.7.130 rep 1000000     Type escape sequence to abort. Sending 100, 100-byte ICMP Echos to 180.40.7.130, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Success rate is 100 percent (100/100), round-trip min/avg/max = 1/3/8 ms S5# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 24431 packets, 2785134 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 21881 packets, 2494434 bytes 5 minute offered rate 2000 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 1018999 packets, 116165886 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   Class-map: dscp32 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp cs4 (32) Class-map: class-default (match-any) 8350 packets, 913204 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# RACK9AS>6 [Resuming connection 6 to r6 ... ] S6(config-if)#do sh policy-map int fa 0/4 S6(config-if)#^Z S6#config t  1d06h: %SYS-5-CONFIG_I: Configured from console by console S6# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#pol R4(config)#policy-map Prob10 R4(config-pmap)#s \ class   R4(config-pmap)#class class-defaultr  R4(config-pmap-c)#set sc  dscop  p 32 R4(config-pmap-c)#int fa 0/0 R4(config-if)#ser R4(config-if)#service-policy out Prob10 R4(config-if)#^Z R4# *Mar 2 06:28:56.904: %SYS-5-CONFIG_I: Configured from console by console R4# RACK9AS>5 [Resuming connection 5 to r5 ... ] S5#ping 180.40.7.130 rep 100 Type escape sequence to abort. Sending 100, 100-byte ICMP Echos to 180.40.7.130, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Success rate is 100 percent (100/100), round-trip min/avg/max = 1/3/4 ms S5# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 24431 packets, 2785134 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 21881 packets, 2494434 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 1018999 packets, 116165886 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   Class-map: dscp32 (match-all) 101 packets, 11498 bytes 5 minute offered rate 2000 bps Match: dscp cs4 (32) Class-map: class-default (match-any) 8363 packets, 914478 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# RACK9AS>6 [Resuming connection 6 to r6 ... ] S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#no pol S6(config)#no policy-mam S6(config)#no policy-mam p S6(config)#no policy-map Prob10 S6(config)#^Z S6# 1d06h: %SYS-5-CONFIG_I: Configured from console by console S6# RACK9AS>5 [Resuming connection 5 to r5 ... ] S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#^Z S5#sh w 1d06h: %SYS-5-CONFIG_I: Configured from console by console S5#sh wrr S5#sh wrr   wrr S5#sh wrr? % Unrecognized command S5#sh wrr   mls ? qos Show QoS information S5#sh mls qos ? aggregate-policer Show aggregate-policer information interface Show interface information maps Show mapping information | Output modifiers S5#sh mls qos         int ? Async Async interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface EsconPhy ESCON interface FastEthernet FastEthernet IEEE 802.3 Filter Filter interface Filtergroup Filter Group interface GigabitEthernet GigabitEthernet IEEE 802.3z LongReachEthernet Long-Reach Ethernet interface Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Null Null interface Port-channel Ethernet Channel of interfaces Portgroup Portgroup interface Pos-channel POS Channel of interfaces SYSCLOCK Telecom-Bus Clock Controller Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-Template Virtual Template interface Virtual-TokenRing Virtual TokenRing --More--   S5#sh int        config t sh int fa 0/24 ? accounting Show interface accounting capabilities Show interface capabilities information controller Show interface status, configuration and controller status counters Show interface counters crb Show interface routing/bridging info dampening Show interface dampening info debounce Show interface debounce time info description Show interface description etherchannel Show interface etherchannel information fair-queue Show interface Weighted Fair Queueing (WFQ) info flowcontrol Show interface flowcontrol information irb Show interface routing/bridging info mac-accounting Show interface MAC accounting info mpls-exp Show interface MPLS experimental accounting info mtu Show interface mtu precedence Show interface precedence accounting info private-vlan Show interface private vlan information pruning Show interface trunk VTP pruning information random-detect Show interface Weighted Random Early Detection (WRED) info rate-limit Show interface rate-limit info stats Show interface packets & octets, in & out, by switching path status Show interface line status --More--   S5#sh int fa 0/24           t fa 0/.3  3 ? accounting Show interface accounting capabilities Show interface capabilities information controller Show interface status, configuration and controller status counters Show interface counters crb Show interface routing/bridging info dampening Show interface dampening info debounce Show interface debounce time info description Show interface description etherchannel Show interface etherchannel information fair-queue Show interface Weighted Fair Queueing (WFQ) info flowcontrol Show interface flowcontrol information irb Show interface routing/bridging info mac-accounting Show interface MAC accounting info mpls-exp Show interface MPLS experimental accounting info mtu Show interface mtu precedence Show interface precedence accounting info private-vlan Show interface private vlan information pruning Show interface trunk VTP pruning information random-detect Show interface Weighted Random Early Detection (WRED) info rate-limit Show interface rate-limit info stats Show interface packets & octets, in & out, by switching path status Show interface line status --More--   summary Show interface summary switchport Show interface switchport information transceiver Show interface transceiver trunk Show interface trunk information vlan Show interface vlan information | Output modifiers S5#sh int fa 0/3               config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int fa 0/3 S5(config-if)#qw  wrr ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id min-reserve Configure min-reserve level S5(config-if)#wrr cos S5(config-if)#wrr cos-map ? <1-4> enter cos-map queue id S5(config-if)#wrr cos-map 4 ? <0-7> CoS values separated by spaces (up to 8 values total) S5(config-if)#wrr cos-map 4 4 S5(config-if)#wrr cos-map 4 4               ^Z S5#sh 1d06h: %SYS-5-CONFIG_I: Configured from console by console S5#sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 Dscp-dscp mutation map: Prob9: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 12 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 26 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-dscp mutation map: Default DSCP Mutation Map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 S5#c sh mls qos ? aggregate-policer Show aggregate-policer information interface Show interface information maps Show mapping information | Output modifiers S5#sh mls qos int ? FastEthernet FastEthernet IEEE 802.3 GigabitEthernet GigabitEthernet IEEE 802.3z buffers Show buffer information policers Show policers information queueing Show queueing information statistics Show statistics | Output modifiers S5#sh mls qos int fa0/3 FastEthernet0/3 trust state: not trusted trust mode: not trusted COS override: dis default COS: 0 DSCP Mutation Map: Default DSCP Mutation Map Trust device: none S5#sh mls qos int fa0/3 ? buffers Show buffer information policers Show policers information queueing Show queueing information statistics Show statistics | Output modifiers S5#sh mls qos int fa0/3 qu S5#sh mls qos int fa0/3 queueing ? | Output modifiers S5#sh mls qos int fa0/3 queueing FastEthernet0/3 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 Cos-queue map: cos-qid 0 - 1 1 - 1 2 - 2 3 - 2 4 - 4 5 - 3 6 - 4 7 - 4 S5# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh run Building configuration... Current configuration : 2868 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service tcp-small-servers ! hostname R3 ! boot-start-marker boot-end-marker ! logging buffered 4096 debugging ! no network-clock-participate slot 1 no network-clock-participate wic 0 no aaa new-model ip subnet-zero ! ! ip nbar port-map ftp tcp 21 20 --More--   R3# RACK9AS>5 [Resuming connection 5 to r5 ... ] S5#sh mls qos int fa0/3 queueing FastEthernet0/3 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 Cos-queue map: cos-qid 0 - 1 1 - 1 2 - 2 3 - 2 4 - 4 5 - 3 6 - 4 7 - 4 S5#sh mls qos int fa0/3 queueing ? | Output modifiers S5#sh mls qos int fa0/3 queueing                                sh run int fa 0/3 Building configuration... Current configuration : 195 bytes ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable wrr-queue cos-map 1 0 1 wrr-queue cos-map 2 2 3 wrr-queue cos-map 3 5 wrr-queue cos-map 4 4 6 7 end S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int fa 0/3 S5(config-if)#int fa 0/3wrr cos-map 4 4   3 6 7 S5(config-if)#wrr cos-map 3 6 7 6 7 2 6 7 S5(config-if)#wrr cos-map 2 6 7   0 S5(config-if)#do sh run int fa 0/3 Building configuration... Current configuration : 195 bytes ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable wrr-queue cos-map 1 1 wrr-queue cos-map 2 0 2 3 6 7 wrr-queue cos-map 3 5 wrr-queue cos-map 4 4 end S5(config-if)#do sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   S5(config-if)#exit S5(config)#mll s qos map ? cos-dscp Map COS to DSCP dscp-cos Map DSCP to COS dscp-mutation Configure dscp-mutation map dscp-switch-priority Map DSCP to switch priority ip-prec-dscp DSCP values for IP precedences 0-7 policed-dscp Map DSCP to policed DSCP S5(config)#mls qos map dscp   S5(config)#mls qos map dscp-co S5(config)#mls qos map dscp-cos ? <0-63> DSCP values separated by spaces (up to 8 values total) S5(config)#mls qos map dscp-cos % Incomplete command. S5(config)#mls qos map dscp-cos 8 9 10 11 13 14 15 ? <0-63> DSCP values separated by spaces (up to 8 values total) to Specify COS S5(config)#mls qos map dscp-cos 8 9 10 11 13 14 15 to 0 S5(config)#mls qos map dsc S5(config)#mls qos map dscp-co S5(config)#mls qos map dscp-cos                      int fa 0/3 S5(config-if)#int fa 0/3mls qos map dscp-cos 8 9 10 11 13 14 15 to 0 exit do sh mls qos maprun int fa 0/3wrr cos-map 2 0 6 7 6 7 3 6 7 S5(config-if)#wrr cos-map 3 6 77                 do sh run int fa 0/3 Building configuration... Current configuration : 195 bytes ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable wrr-queue cos-map 1 1 wrr-queue cos-map 2 0 2 3 wrr-queue cos-map 3 5 6 7 wrr-queue cos-map 4 4 end S5(config-if)#do sh run int fa 0/3wrr cos-map 3 6 7    0 2 S5(config-if)#wrr cos-map 3 0 2do sh run int fa 0/3wrr cos-map 3 6 7 do sh run int fa 0/3wrr cos-map 3 6 7 int fa 0/3 mls qos map dscp-cos 8 9 10 11 13 14 15 to 0 exit do sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 01 00 00 00 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   S5(config-if)#do sh mls qos map Dscp-cos Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 01 00 00 00 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 S5(config-if)#do sh mls qos map Dscp-cos wrr cos-map 3 0 2do sh run int fa 0/3 Building configuration... Current configuration : 195 bytes ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable wrr-queue cos-map 1 1 wrr-queue cos-map 2 3 wrr-queue cos-map 3 0 2 5 6 7 wrr-queue cos-map 4 4 end S5(config-if)#exit S5(config)#exitdo sh run int fa 0/3mls qos map Dscp-cos wrr cos-map 3 0 2do sh run int fa 0/3wrr cos-map 3 6 7 int fa 0/3 mls qos map dscp-cos 8 9 10 11 13 14 15 to 0                       24 25 27 28 29 30 31 to 2 S5(config)#mls qos map dscp-cos 24 25 27 28 29 30 31 to 2exit do sh run int fa 0/3mls qos map Dscp-cos Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 01 00 00 00 02 02 02 02 2 : 02 02 02 02 02 02 03 02 02 02 3 : 02 02 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 S5(config)#do sh mls qos map Dscp-cosmls qos map dscp-cos 24 25 27 28 29 30 31 to 2                           33 34 35 36 37 38 39 to 2 S5(config)#mls qos map dscp-cos 33 34 35 36 37 38 39 to 2do sh mls qos map Dscp-cos  Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 01 00 00 00 02 02 02 02 2 : 02 02 02 02 02 02 03 02 02 02 3 : 02 02 04 02 02 02 02 02 02 02 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 S5(config)#int fa 0/3 S5(config-if)# S5(config-if)#pri S5(config-if)#priority-queue out S5(config-if)#wrr ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id min-reserve Configure min-reserve level S5(config-if)#wrr ba S5(config-if)#wrr bandwidth ? <1-65536> enter bandwidth weight for qid 1 S5(config-if)#wrr bandwidth 30 40 30 1 S5(config-if)#^Z S5# 1d06h: %SYS-5-CONFIG_I: Configured from console by console S5#sh run int fa 0/3 Building configuration... Current configuration : 247 bytes ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable wrr-queue bandwidth 30 40 30 1 wrr-queue cos-map 1 1 wrr-queue cos-map 2 3 wrr-queue cos-map 3 0 2 5 6 7 wrr-queue cos-map 4 4 priority-queue out end S5#cofnig t ^ % Invalid input detected at '^' marker. S5#in  config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#iunt   nt fa 0./3adsing[hwa b ^ % Invalid input detected at '^' marker. S5(config)#int fa 0/3 S5(config-if)#int fa 0/3./3adsing[hwa bwrr bandwidth 30 40 30 1priority-queue out wrr bandwidth 30 40 30 1       30 40 1 S5(config-if)#^Z S5# 1d06h: %SYS-5-CONFIG_I: Configured from console by console S5#sh run | ml   b mls mls qos map dscp-mutation Prob9 14 to 12 mls qos map dscp-mutation Prob9 28 to 26 mls qos map dscp-cos 8 9 10 11 13 14 15 to 0 mls qos map dscp-cos 24 25 27 28 29 30 31 33 to 2 mls qos map dscp-cos 34 35 36 37 38 39 to 2 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 --More--   switchport mode dynamic desirable ! interface FastEthernet0/2 switchport mode dynamic desirable ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable wrr-queue bandwidth 30 30 40 1 wrr-queue cos-map 1 1 wrr-queue cos-map 2 3 wrr-queue cos-map 3 0 2 5 6 7 wrr-queue cos-map 4 4 priority-queue out ! interface FastEthernet0/4 switchport mode dynamic desirable ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport mode dynamic desirable --More--   S5#sh run | b mls mls qos map dscp-mutation Prob9 14 to 12 mls qos map dscp-mutation Prob9 28 to 26 mls qos map dscp-cos 8 9 10 11 13 14 15 to 0 mls qos map dscp-cos 24 25 27 28 29 30 31 33 to 2 mls qos map dscp-cos 34 35 36 37 38 39 to 2 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 --More--   switchport mode dynamic desirable ! interface FastEthernet0/2 switchport mode dynamic desirable ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable wrr-queue bandwidth 30 30 40 1 wrr-queue cos-map 1 1 wrr-queue cos-map 2 3 wrr-queue cos-map 3 0 2 5 6 7 wrr-queue cos-map 4 4 priority-queue out ! interface FastEthernet0/4 switchport mode dynamic desirable ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport mode dynamic desirable --More--  ! interface FastEthernet0/7 no switchport ip address 208.28.1.2 255.255.255.0 ! interface FastEthernet0/8 switchport mode dynamic desirable ! interface FastEthernet0/9 switchport mode dynamic desirable ! interface FastEthernet0/10 switchport mode dynamic desirable ! interface FastEthernet0/11 switchport mode dynamic desirable ! interface FastEthernet0/12 switchport mode dynamic desirable ! interface FastEthernet0/13 switchport mode dynamic desirable mls qos dscp-mutation Prob9 --More--  ! interface FastEthernet0/14 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/15 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/16 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/17 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/18 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/19 switchport mode dynamic desirable --More--   mls qos dscp-mutation Prob9 ! interface FastEthernet0/20 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/21 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/22 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/23 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk mls qos trust dscp mls qos dscp-mutation Prob9 --More--  ! interface GigabitEthernet0/1 switchport mode dynamic desirable ! interface GigabitEthernet0/2 switchport mode dynamic desirable ! interface Vlan1 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ip http server ip http secure-server ! ! ! control-plane ! --More--  ! line con 0 exec-timeout 0 0 logging synchronous line vty 0 4 privilege level 15 no login line vty 5 15 no login ! ! end S5#q RACK9AS>4 [Resuming connection 4 to r4 ... ] R4# RACK9AS>5 [Resuming connection 5 to r5 ... ]   S5# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#sh run | b pol policy-map Prob10 class class-default set dscp cs4 ! ! ! ! ! interface Loopback0 ip address 100.1.1.1 255.255.255.0 ! interface FastEthernet0/0 ip address 180.40.7.130 255.255.255.224 duplex auto speed auto service-policy output Prob10 ! interface ATM1/0 no ip address shutdown no atm ilmi-keepalive ! router ospf 1 --More--   R4# RACK9AS>6 [Resuming connection 6 to r6 ... ] S6#sh urn tin       run int fa 0/4 Building configuration... Current configuration : 115 bytes ! interface FastEthernet0/4 switchport access vlan 10 switchport mode dynamic desirable mls qos trust dscp end S6# S6# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#sh run | b polconfig t ping 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms R4#5 Trying 5... % Destination unreachable; gateway or host down % Unknown command or computer name, or unable to find computer address R4# R4# RACK9AS>5 [Resuming connection 5 to r5 ... ] S5#sh run | b mls config t fnig tsh run int fa 0/3config t sh run int fa 0/3mls qos int fa0/3 queueing FastEthernet0/3 Egress expedite queue: ena wrr bandwidth weights: qid-weights 1 - 30 2 - 30 3 - 40 4 - 1 when expedite queue is disabled Cos-queue map: cos-qid 0 - 3 1 - 1 2 - 3 3 - 2 4 - 4 5 - 3 6 - 3 7 - 3 S5#sh mls qos int fa0/3 queueing          ? buffers Show buffer information policers Show policers information queueing Show queueing information statistics Show statistics | Output modifiers S5#sh mls qos int fa0/3 sta FastEthernet0/3 Ingress dscp: incoming no_change classified policed dropped (in bytes) Others: 8494069 741141 7752928 0 0 Egress dscp: incoming no_change classified policed dropped (in bytes) Others: 8631963 n/a n/a 0 0 S5#sh mls qos int fa0/3 sta ? | Output modifiers S5#sh mls qos int fa0/3 sta               ? aggregate-policer Show aggregate-policer information interface Show interface information maps Show mapping information | Output modifiers S5#sh mls qos           int fa0/3 ? accounting Show interface accounting capabilities Show interface capabilities information controller Show interface status, configuration and controller status counters Show interface counters crb Show interface routing/bridging info dampening Show interface dampening info debounce Show interface debounce time info description Show interface description etherchannel Show interface etherchannel information fair-queue Show interface Weighted Fair Queueing (WFQ) info flowcontrol Show interface flowcontrol information irb Show interface routing/bridging info mac-accounting Show interface MAC accounting info mpls-exp Show interface MPLS experimental accounting info mtu Show interface mtu precedence Show interface precedence accounting info private-vlan Show interface private vlan information pruning Show interface trunk VTP pruning information random-detect Show interface Weighted Random Early Detection (WRED) info rate-limit Show interface rate-limit info stats Show interface packets & octets, in & out, by switching path status Show interface line status --More--   summary Show interface summary switchport Show interface switchport information transceiver Show interface transceiver trunk Show interface trunk information vlan Show interface vlan information | Output modifiers S5#sh int fa0/3 con S5#sh int fa0/3 controller ? | Output modifiers S5#sh int fa0/3 controller FastEthernet0/3 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 000b.fd8f.7e03 (bia 000b.fd8f.7e03) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:21, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 1168271 packets input, 160237850 bytes, 0 no buffer Received 13717 broadcasts (0 multicast) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 13717 multicast, 0 pause input 0 input packets with dribble condition detected 1241952 packets output, 165414894 bytes, 0 underruns --More--   0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out Transmit FastEthernet0/3 Receive 165415463 Bytes 160238016 Bytes 1153474 Unicast frames 1143435 Unicast frames 88479 Multicast frames 13714 Multicast frames 3 Broadcast frames 0 Broadcast frames 0 Discarded frames 11120 No dest, unicast 0 Too old frames 4 No dest, multicast 0 Deferred frames 0 No dest, broadcast 0 1 collision frames 0 2 collision frames 0 FCS errors 0 3 collision frames 0 Oversize frames 0 4 collision frames 0 Undersize frames 0 5 collision frames 0 Collision fragments 0 6 collision frames 0 7 collision frames 11231 Minimum size frames 0 8 collision frames 1134446 65 to 127 byte frames 0 9 collision frames 1291 128 to 255 byte frames 0 10 collision frames 1854 256 to 511 byte frames --More--   0 11 collision frames 4859 512 to 1023 byte frames 0 12 collision frames 14592 1024 to 1518 byte frames 0 13 collision frames 0 14 collision frames 0 Flooded frames 0 15 collision frames 0 Overrun frames 0 Excessive collisions 0 VLAN filtered frames 0 Late collisions 0 Source routed frames 0 Good (1 coll) frames 0 Valid oversize frames 0 Good(>1 coll) frames 0 Pause frames 0 Pause frames 0 Symbol error frames 0 VLAN discard frames 0 Invalid frames, too large 0 Excess defer frames 0 Valid frames, too large 0 Too large frames 0 Invalid frames, too small 70723 64 byte frames 0 Valid frames, too small 1149724 127 byte frames 197 255 byte frames 1867 511 byte frames 4859 1023 byte frames 14592 1518 byte frames S5#sh mls qos int ? FastEthernet FastEthernet IEEE 802.3 GigabitEthernet GigabitEthernet IEEE 802.3z buffers Show buffer information policers Show policers information queueing Show queueing information statistics Show statistics | Output modifiers S5#sh mls qos int FastEthernet0/1 trust state: not trusted trust mode: not trusted COS override: dis default COS: 0 DSCP Mutation Map: Default DSCP Mutation Map Trust device: none FastEthernet0/2 trust state: not trusted trust mode: not trusted COS override: dis default COS: 0 DSCP Mutation Map: Default DSCP Mutation Map Trust device: none FastEthernet0/3 trust state: not trusted trust mode: not trusted COS override: dis default COS: 0 DSCP Mutation Map: Default DSCP Mutation Map Trust device: none --More--   --More--  FastEthernet0/4 --More--  trust state: not trusted --More--  trust mode: not trusted --More--   S5#sh mls qos int fa 0/.3  3 FastEthernet0/3 trust state: not trusted trust mode: not trusted COS override: dis default COS: 0 DSCP Mutation Map: Default DSCP Mutation Map Trust device: none S5#sh mls qos int fa 0/3 ? buffers Show buffer information policers Show policers information queueing Show queueing information statistics Show statistics | Output modifiers S5#sh mls qos int fa 0/3 sta S5#sh mls qos int fa 0/3 statistics FastEthernet0/3 Ingress dscp: incoming no_change classified policed dropped (in bytes) Others: 8500099 744417 7755682 0 0 Egress dscp: incoming no_change classified policed dropped (in bytes) Others: 8650093 n/a n/a 0 0 S5#sh mls qos int fa 0/3 statistics            qu S5#sh mls qos int fa 0/3 queueing ? | Output modifiers S5#sh mls qos int fa 0/3 queueing FastEthernet0/3 Egress expedite queue: ena wrr bandwidth weights: qid-weights 1 - 30 2 - 30 3 - 40 4 - 1 when expedite queue is disabled Cos-queue map: cos-qid 0 - 3 1 - 1 2 - 3 3 - 2 4 - 4 5 - 3 6 - 3 7 - 3 S5#sh mls qos int fa 0/3 queueing          ? buffers Show buffer information policers Show policers information queueing Show queueing information statistics Show statistics | Output modifiers S5#sh mls qos int fa 0/3 bu S5#sh mls qos int fa 0/3 buffers FastEthernet0/3 Minimum reserve buffer size: 100 100 100 100 100 100 100 100 Minimum reserve buffer level select: 1 2 3 4 S5#sh mls qos int fa 0/3 buffers         pol S5#sh mls qos int fa 0/3 policers FastEthernet0/3 S5#sh mls qos int fa 0/3 policers ? | Output modifiers S5#sh mls qos int fa 0/3 policers                                  RACK9AS>3 [Resuming connection 3 to r3 ... ] R3# R3#confi gt ^ % Invalid input detected at '^' marker. R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#do sh run | b cla class-map match-all dscp26 match dscp af31 class-map match-all dscp24 match dscp cs3 class-map match-all dscp32 match dscp cs4 class-map match-all dscp28 match dscp af32 class-map match-all Telnet match protocol telnet class-map match-all prec3 match ip precedence 3 class-map match-all FTP match protocol ftp ! ! policy-map test class dscp24 class dscp26 class dscp28 class prec3 class dscp32 policy-map Prob7 --More--   R3(config)#class R3(config)#class-map AF12    af13 2 R3(config-cmap)#match dssc R3(config-cmap)#match dssc  cp R3(config-cmap)#match dscp af12 R3(config-cmap)#exit R3(config)#pol R3(config)#policy-map Prob11 R3(config-pmap)#class R3(config-pmap)#class as f12 R3(config-pmap-c)#pri R3(config-pmap-c)#priority p R3(config-pmap-c)#priority percent 25 R3(config-pmap-c)#int fa  s 1/2 R3(config-if)#no serv R3(config-if)#no service-policy                   do sh run int f s 1/2 Building configuration... Current configuration : 123 bytes ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 max-reserved-bandwidth 100 service-policy output Prob7 end R3(config-if)#no service-policy output Prob7 R3(config-if)#serv out Prob11 R3(config-if)#^Z R3# *Mar 2 07:03:41.401: %SYS-5-CONFIG_I: Configured from console by console R3#sh run | b cl no network-clock-participate slot 1 no network-clock-participate wic 0 no aaa new-model ip subnet-zero ! ! ip nbar port-map ftp tcp 21 20 ! ip cef no ip domain lookup ip audit po max-events 100 ! ! ! ! ! ! ! ! ! ! ! ! --More--   R3#sh run | b class-map af12 R3#sh run | b class-map af12          class-map match-all dscp26 match dscp af31 class-map match-all dscp24 match dscp cs3 class-map match-all af12 match dscp af12 class-map match-all dscp32 match dscp cs4 class-map match-all dscp28 match dscp af32 class-map match-all Telnet match protocol telnet class-map match-all prec3 match ip precedence 3 class-map match-all FTP match protocol ftp ! ! policy-map test class dscp24 class dscp26 class dscp28 class prec3 --More--   class dscp32 policy-map Prob7 class Telnet bandwidth percent 24 class FTP bandwidth percent 51 class class-default bandwidth percent 25 policy-map Prob11 class af12 priority percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto service-policy input test --More--  ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay frame-relay map ip 180.40.7.65 307 broadcast tcp header-compression connections 20 frame-relay map ip 180.40.7.67 302 broadcast ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 --More--   ip address 180.40.7.1 255.255.255.224 max-reserved-bandwidth 100 service-policy output Prob11 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown --More--   R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/. 0 R3(config-if)#st R3(config-if)#standby ? <0-255> group number authentication Authentication delay HSRP initialisation delay ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level redirects Configure sending of ICMP Redirect messages with an HSRP virtual IP address as the gateway IP address timers Hello and hold timers track Priority tracking use-bia HSRP uses interface's burned in address R3(config-if)#standby 47 ip ? A.B.C.D Virtual IP address R3(config-if)#standby 47 ip 180.40.7.132 ? secondary Make this IP address a secondary virtual IP address R3(config-if)#standby 47 ip 180.40.7.132 R3(config-if)#do *Mar 2 07:08:23.151: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active R3(config-if)#do standby 47 ip 180.40.7.132  do sh arp Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.131 193 0012.7f80.f381 ARPA FastEthernet0/0 Internet 180.40.7.130 194 0030.85f3.7040 ARPA FastEthernet0/0 Internet 180.40.7.129 - 0012.7f8e.b6c0 ARPA FastEthernet0/0 Internet 180.40.7.132 - 0000.0c07.ac2f ARPA FastEthernet0/0 R3(config-if)#do sh arpstandby 47 ip 180.40.7.132                    60 10.1.1.1i10.1.1.1p10.1.1.1 10.1.1.1 R3(config-if)#standby 60 ip 10.1.1.1do sh arp standby 47 ip 180.40.7.132 do sh arp  Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.131 194 0012.7f80.f381 ARPA FastEthernet0/0 Internet 180.40.7.130 194 0030.85f3.7040 ARPA FastEthernet0/0 Internet 180.40.7.129 - 0012.7f8e.b6c0 ARPA FastEthernet0/0 Internet 180.40.7.132 - 0000.0c07.ac2f ARPA FastEthernet0/0 R3(config-if)#do sh arp Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.131 194 0012.7f80.f381 ARPA FastEthernet0/0 Internet 180.40.7.130 194 0030.85f3.7040 ARPA FastEthernet0/0 Internet 180.40.7.129 - 0012.7f8e.b6c0 ARPA FastEthernet0/0 Internet 180.40.7.132 - 0000.0c07.ac2f ARPA FastEthernet0/0 R3(config-if)#do sh arp Protocol Address Age (min) Hardware Addr Type Interface Internet 10.1.1.1 - 0000.0c07.ac3c ARPA FastEthernet0/0 Internet 180.40.7.131 194 0012.7f80.f381 ARPA FastEthernet0/0 Internet 180.40.7.130 194 0030.85f3.7040 ARPA FastEthernet0/0 Internet 180.40.7.129 - 0012.7f8e.b6c0 ARPA FastEthernet0/0 Internet 180.40.7.132 - 0000.0c07.ac2f ARPA FastEthernet0/0 R3(config-if)# *Mar 2 07:09:30.525: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 60 state Standby -> Active R3(config-if)#do sh arpstandby 60 ip 10.1.1.1nstandby 60 ip 10.1.1.1ostandby 60 ip 10.1.1.1 standby 60 ip 10.1.1.1 R3(config-if)# *Mar 2 07:09:41.075: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 60 state Active -> Disabled R3(config-if)#no standby 60 ip 10.1.1.1do sh arp standby 60 ip 10.1.1.1do sh arp standby 47 ip 180.40.7.132                 prin  R3(config-if)#standby 47 priority 150 R3(config-if)#stand R3(config-if)#standby 47 pre R3(config-if)#standby 47 preempt R3(config-if)#st R3(config-if)#standby 47 tr R3(config-if)#standby 47 track ser 1/0 R3(config-if)#standby 47 track ser 1/0 51 R3(config-if)#standby 47 track ser 1/0 51 51 2 51 R3(config-if)#^Z R3# RACK9AS>7 [Resuming connection 7 to r7 ... ] R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/1 R7(config-if)#st R7(config-if)#standby 47 % Incomplete command. R7(config-if)#standby 47 ip 180.40.7.132 R7(config-if)#st R7(config-if)#standby 47 pre R7(config-if)#standby 47 preempt R7(config-if)#^Z R7# *Mar 2 07:12:53.057: %SYS-5-CONFIG_I: Configured from console by console R7#sh stand FastEthernet0/1 - Group 47 State is Standby 1 state change, last state change 00:00:07 Virtual IP address is 180.40.7.132 Active virtual MAC address is 0000.0c07.ac2f Local virtual MAC address is 0000.0c07.ac2f (default) Hello time 3 sec, hold time 10 sec Next hello sent in 1.534 secs Preemption enabled Active router is 180.40.7.129, priority 150 (expires in 7.592 sec) Standby router is local Priority 100 (default 100) IP redundancy name is "hsrp-Fa0/1-47" (default) R7#qsh stand br R7#sh stand brief P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/1 47 100 P Standby 180.40.7.129 local 180.40.7.132 R7# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#pin 180.40.7.132 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.132, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/4 ms R4#con fi g % Ambiguous command: "con fi g" R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#no ip lo R4(config)#no ip local route R4(config)#no ip local route- R4(config)#no ip local route-      po R4(config)#no ip local po ip local po? policy pool R4(config)#no ip local pol R4(config)#no ip local policy routq R4(config)#no ip local policy routq  R4(config)#no ip local policy route-map                              sh ru       do sh run | i ip local ip local policy route-map Prob2 R4(config)#no ip local policy route-map Prob2 R4(config)#^Z R4# *Mar 2 07:16:37.492: %SYS-5-CONFIG_I: Configured from console by console R4# R4# R4# RACK9AS>2 [Resuming connection 2 to r2 ... ] *Ma R2#coinfig t ^ % Invalid input detected at '^' marker. R2#int   config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/2 R2(config-if)#shut R2(config-if)# RACK9AS>3 [Resuming connection 3 to r3 ... ] * R3# *Mar 2 07:14:34.023: %LINK-3-UPDOWN: Interface Serial1/2, changed state to down R3# *Mar 2 07:14:34.023: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/2 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 07:14:35.024: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to down R3# *Mar 2 07:14:35.269: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Speak R3# RACK9AS>7 [Resuming connection 7 to r7 ... ] * R7#sh stand brief P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/1 47 100 P Active local unknown 180.40.7.132 R7#sh stand brief P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/1 47 100 P Active local 180.40.7.129 180.40.7.132 R7# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh ip    stand br P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/0 47 99 P Standby 180.40.7.131 local 180.40.7.132 R3# RACK9AS>2 [Resuming connection 2 to r2 ... ] *M R2(config-if)#no shut R2(config-if)#^Z R2# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh run *Mar 2 07:15:13.075: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up *Mar 2 07:15:14.076: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up R3#sh run *Mar 2 07:15:14.281: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active R3#sh run int f fa 0/0 Building configuration... Current configuration : 288 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto standby 47 ip 180.40.7.132 standby 47 priority 150 standby 47 preempt standby 47 track Serial1/0 51 standby 47 track Serial1/2 51 service-policy input test end R3# *Mar 2 07:15:23.215: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/2 from LOADING to FULL, Loading Done R3# RACK9AS>7 [Resuming connection 7 to r7 ... ] *Mar R7#sh run int fa 0/1 Building configuration... Current configuration : 176 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 speed auto half-duplex standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7# R7# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#confi gt ^ % Invalid input detected at '^' marker. R3#onfig t ^ % Invalid input detected at '^' marker. R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#do sh r ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/32 is subnetted, 1 subnets O 100.1.1.1 [110/2] via 180.40.7.130, 00:00:57, FastEthernet0/0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/792] via 180.40.7.67, 00:00:57, Serial1/0 [110/792] via 180.40.7.2, 00:00:57, Serial1/2 O 20.10.1.0 [110/782] via 180.40.7.67, 00:00:57, Serial1/0 [110/782] via 180.40.7.2, 00:00:57, Serial1/2 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:00:57, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 5 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/781] via 180.40.7.67, 00:00:59, Serial1/0 [110/781] via 180.40.7.2, 00:00:59, Serial1/2 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:00:59, FastEthernet0/0 --More--   R3(config)#tr R3(config)#trac R3(config)#track ? <1-500> Tracked object resolution Tracking resolution parameters timer Polling interval timers R3(config)#track 1 ? interface Select an interface to track ip IP protocol R3(config)#track 1 ip ? route IP route R3(config)#track 1 ip route ? A.B.C.D {/nn || A.B.C.D} Prefix and mask R3(config)#track 1 ip route 20.10.2.0  /24 ? metric Route metric reachability Route reachability state R3(config)#track 1 ip route 20.10.2.0/24 re R3(config)#track 1 ip route 20.10.2.0/24 reachability ? R3(config)#track 1 ip route 20.10.2.0/24 reachability % Cannot change object created via HSRP R3(config)#track 1 ip route 20.10.2.0/24 reachability  ip route 20.10.2.0/24 reachability 3 ip route 20.10.2.0/24 reachability  R3(config-track)#exit R3(config)#int fa0/0 R3(config-if)#stan R3(config-if)#standby 47 tr R3(config-if)#standby 47 track ? <1-500> Tracked object number Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-TokenRing Virtual TokenRing R3(config-if)#standby 47 track 3 ? decrement Priority decrement R3(config-if)#standby 47 track 3 de R3(config-if)#standby 47 track 3 decrement ? <1-255> Decrement value R3(config-if)#standby 47 track 3 decrement 55 R3(config-if)#^Z R3# RACK9AS>6 [Resuming connection 6 to r6 ... ] S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 0/. 1 S6(config-if)#shut S6(config-if)# 1d07h: %OSPF-5-ADJCHG: Process 1, Nbr 20.10.2.2 on FastEthernet0/1 from FULL to DOWN, Neighbor Down: Interface down or detached S6(config-if)# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Ma R3#sh ip ospf       *Mar 2 07:17:59.448: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Speak R3#sh ip stand brie ^ % Invalid input detected at '^' marker. R3#sh ip stand brie stand brie  stand brie stand brie  P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/0 47 95 P Speak 180.40.7.131 unknown 180.40.7.132 R3# RACK9AS>6 [Resuming connection 6 to r6 ... ] 1d0 S6(config-if)#no shut S6(config-if)#^Z S6# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#sh run | b track track 3 ip route 20.10.2.0 255.255.255.0 reachability ! ! ! class-map match-all dscp26 match dscp af31 class-map match-all dscp24 match dscp cs3 class-map match-all af12 match dscp af12 class-map match-all dscp32 match dscp cs4 class-map match-all dscp28 match dscp af32 class-map match-all Telnet match protocol telnet class-map match-all prec3 match ip precedence 3 class-map match-all FTP match protocol ftp ! ! policy-map test --More-- *Mar 2 07:18:29.457: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active --More--   R3#sh run int fa0/0 Building configuration... Current configuration : 321 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto standby 47 ip 180.40.7.132 standby 47 priority 150 standby 47 preempt standby 47 track Serial1/0 51 standby 47 track Serial1/2 51 standby 47 track 3 decrement 55 service-policy input test end R3# R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#vrrq R3(config-if)#vrrq  R3(config-if)#vrrp ? <1-255> Group number R3(config-if)#vrrp 47    50 ? authentication Authentication string description Group specific description ip Enable Virtual Router Redundancy Protocol (VRRP) for IP preempt Enable preemption of lower priority Master priority Priority of this VRRP group timers Set the VRRP timers R3(config-if)#vrrp 50 ip ? A.B.C.D VRRP group IP address R3(config-if)#vrrp 50 ip 180.40.73 .133 ? secondary Specify an additional VRRP address for this group R3(config-if)#vrrp 50 ip 180.40.7.133 R3(config-if)# *Mar 2 07:21:43.743: %VRRP-6-STATECHANGE: Fa0/0 Grp 50 state Init -> Backup R3(config-if)#vrrp 50 ? authentication Authentication string description Group specific description ip Enable Virtual Router Redundancy Protocol (VRRP) for IP preempt Enable preemption of lower priority Master priority Priority of this VRRP group timers Set the VRRP timers R3(config-if)#vrrp 50 *Mar 2 07:21:47.353: %VRRP-6-STATECHANGE: Fa0/0 Grp 50 state Backup -> Master R3(config-if)#vrrp 50 pri R3(config-if)#vrrp 50 priority                    ^Z R3# RACK9AS>7 [Resuming connection 7 to r7 ... ] *Mar R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0. /1 R7(config-if)#vrrp 50 p 180.40.7.133 ^ % Invalid input detected at '^' marker. R7(config-if)#vrrp 50 p 180.40.7.133ip 180.40.7.133 R7(config-if)# *Mar 2 07:22:13.580: %VRRP-6-STATECHANGE: Fa0/1 Grp 50 state Init -> Backup R7(config-if)#vrrp 50 pri`  R7(config-if)#vrrp 50 priority *Mar 2 07:22:17.190: %VRRP-6-STATECHANGE: Fa0/1 Grp 50 state Backup -> Master R7(config-if)#vrrp 50 priority 150 R7(config-if)#do sh vrrp FastEthernet0/1 - Group 50 State is Master Virtual IP address is 180.40.7.133 Virtual MAC address is 0000.5e00.0132 Advertisement interval is 1.000 sec Preemption enabled Priority is 150 Master Router is 180.40.7.131 (local), priority is 150 Master Advertisement interval is 1.000 sec Master Down interval is 3.414 sec R7(config-if)#q ^Z R7# *Mar 2 07:22:32.956: %SYS-5-CONFIG_I: Configured from console by console R7# R7# R7# R7# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Mar 2 0 R3#sh vrrp FastEthernet0/0 - Group 50 State is Backup Virtual IP address is 180.40.7.133 Virtual MAC address is 0000.5e00.0132 Advertisement interval is 1.000 sec Preemption enabled Priority is 100 Master Router is 180.40.7.131, priority is 150 Master Advertisement interval is 1.000 sec Master Down interval is 3.609 sec (expires in 2.772 sec) R3#sh reun     un int fa 0/1 Building configuration... Current configuration : 83 bytes ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto end R3#sh run int fa 0/1 0 Building configuration... Current configuration : 346 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto vrrp 50 ip 180.40.7.133 standby 47 ip 180.40.7.132 standby 47 priority 150 standby 47 preempt standby 47 track Serial1/0 51 standby 47 track Serial1/2 51 standby 47 track 3 decrement 55 service-policy input test end R3# R3# RACK9AS>7 [Resuming connection 7 to r7 ... ] R7#sh run |   int fa 0/1 Building configuration... Current configuration : 223 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 speed auto half-duplex vrrp 50 ip 180.40.7.133 vrrp 50 priority 150 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7# R7# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip dch R3(config)#ip dch      dhcp R3(config)#dhcp  R3(config)#dhc   ip dhc R3(config)#ip dhcp e R3(config)#ip dhcp excluded-address  R3(config)#ip dhcp excluded-address 180.40.7.129 R3(config)#ip dhcp excluded-address 180.40.7.129  31 180.40.7.134 R3(config)#ip dhcp po  pool Wontheshutup            Prob15 R3(dhcp-config)#net R3(dhcp-config)#netw R3(dhcp-config)#network 180.40.7.128 ;/27/27  R3(dhcp-config)#de R3(dhcp-config)#default-router 180.40.7.132 R3(dhcp-config)#do R3(dhcp-config)#domain-name             dn R3(dhcp-config)#dns-server 208.28.1.8211111        ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#dns-server 208.28.1.82 R3(dhcp-config)#dom R3(dhcp-config)#domain-name MyCii  c CIE R3(dhcp-config)#op R3(dhcp-config)#option ? <0-254> DHCP option code R3(dhcp-config)#option 150 ? ascii Data is an NVT ASCII string hex Data is a hexadecimal string instance Specify the option instance ip Data is one or more IP addresses R3(dhcp-config)#option 150 ip ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#option 150 ip 20.20.20.20 R3(dhcp-config)# R3(dhcp-config)# R3(dhcp-config)# R3(dhcp-config)#^Z R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int fa 0/0 R4(config-if)#ip add dhcp R4(config-if)# *Mar 2 07:30:52.988: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 07:30:52.988: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R4(config-if)#do deb boot deb boot ^ % Invalid input detected at '^' marker. R4(config-if)#do deb boot           ^Z R4# *Mar 2 07:31:04.012: %SYS-5-CONFIG_I: Configured from console by console R4#s *Mar 2 07:31:04.156: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.130, mask 255.255.255.224, hostname R4 R4#s dbe  eb ? aaa AAA Authentication, Authorization and Accounting access-expression Boolean access expression adjacency adjacency all Enable all debugging alps ALPS debug information arp IP ARP and HP Probe transactions asnl Application Subscribe Notify Layer aspp ASPP information async Async interface information atm ATM interface packets backhaul-session-manager Backhaul SM options backup Backup events bgp BGP information bsc BSC information bstun BSTUN information call Call Information call-mgmt Call Management callback Callback activity cca CCA activity ccfrf11 CCFRF11 information cch323 CCH323 information ccsip CCSIP information --More--   ccswvoice ccswvoice information cdapi CDAPI information cdp CDP information ces-conn Connection Manager CES Client Info cgma Cisco Gateway Management Application Information chat Chat scripts activity cls CLS Information cns CNS agents compress COMPRESS traffic condition Condition confmodem Modem configuration database conn Connection Manager information cops COPS crm Carrier Resource Manager info crypto Cryptographic subsystem custom-queue Custom output queueing dampening Dampening dhcp DHCP client activity dialer Dial on Demand dialpeer Dialpeer info diffserv DiffServ COPS Client dlsw Data Link Switching (DLSw) events dnsix Dnsix information --More-- *Mar 2 07:31:13.048: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done --More--   domain Domain Name System drip DRiP debug information dspapi Generic DSP API dspu DSPU Information dss Debug DSS dxi atm-dxi information eigrp EIGRP Protocol information entry Incoming queue entries ethernet-interface Ethernet network interface events fastethernet Fast Ethernet interface information fax Fax frame-relay Frame Relay fras FRAS Debug fras-host FRAS Host Debug funi FUNI interface packets h225 H.225 Library Debugging h245 H.245 Library Debugging hpi HPI (54x) DSP messages http HTTP Debugging interface interface ip IP information ipv6 IPv6 information kron Kron subsys debugs --More-- *Mar 2 07:31:16.052: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from LOADING to FULL, Loading Done --More--   R4#deb ip ? address IP address activity audit IDS audit events auth-proxy Authentication proxy debug bgp BGP information cache IP cache operations casa Casa debugging cef IP CEF operations cgmp CGMP protocol activity dhcp Dynamic Host Configuration Protocol drp Director response protocol dvmrp DVMRP protocol activity eigrp IP-EIGRP information error IP error debugging flow IP Flow switching operations ftp FTP dialogue html HTML connections http HTTP connections icmp ICMP transactions igmp IGMP protocol activity inspect Stateful inspection events interface IP interface configuration changes mbgp MBGP information --More--   R4#deb ip e   p dh R4#deb ip dhcp % Incomplete command. R4#deb ip dhcp ? server DHCP server activity R4#deb ip dhcp         dh R4#deb dhcp ? detail DHCP packet content R4#deb dhcp de R4#deb dhcp detail ? R4#deb dhcp detail DHCP client activity debugging is on (detailed) R4#cofnig t ^ % Invalid input detected at '^' marker. R4#cpo   config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int fa 0/0 R4(config-if)#int fa 0/0do deb bootip add dhcpnip add dhcpoip add dhcp ip add dhcp *Mar 2 07:31:53.272: DHCP: SRelease attempt # 1 for entry: *Mar 2 07:31:53.272: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/0 *Mar 2 07:31:53.272: Temp sub net mask: 255.255.255.224 *Mar 2 07:31:53.272: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 07:31:53.272: DHCP transaction id: 6C34389 *Mar 2 07:31:53.272: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 07:31:53.272: Temp default-gateway addr: 180.40.7.132 *Mar 2 07:31:53.272: Next timer fires after: 00:00:01 *Mar 2 07:31:53.272: Retry count: 1 Client-ID: cisco-0030.85f3.7040-Fa0/0 *Mar 2 07:31:53.276: Hostname: R4 *Mar 2 07:31:53.276: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 07:31:53.276: DHCP: SRelease: 279 bytes *Mar 2 07:31:53.340: DHCP: SRelease attempt # 2 for entry: *Mar 2 07:31:53.340: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/0 *Mar 2 07:31:53.340: Temp sub net mask: 255.255.255.224 *Mar 2 07:31:53.340: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 07:31:53.340: DHCP transaction id: 6C34389 *Mar 2 07:31:53.340: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 07:31:53.340: Temp default-gateway addr: 180.40.7.132 *Mar 2 07:31:53.340: Next timer fires after: 00:00:00 *Mar 2 07:31:53.340: Retry count: 2 Client-ID: cisco-0030.85f3.7040-Fa0/0 *Mar 2 07:31:53.340: Hostname: R4 *Mar 2 07:31:53.344: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 07:31:53.344: DHCP: SRelease: 279 bytes *Mar 2 07:31:53.344: DHCP: Releasing ipl options: *Mar 2 07:31:53.344: Clearing default gateway and route to 180.40.7.132 *Mar 2 07:31:53.344: Removing old default route 180.40.7.132 *Mar 2 07:31:53.348: Clearing DNS address 208.28.1.82 *Mar 2 07:31:53.348: Clearing R4(config-if)#default domain of MyCCIE *Mar 2 07:31:54.272: DHCP: SRelease attempt # 3 for entry: *Mar 2 07:31:54.272: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/0 *Mar 2 07:31:54.272: Temp sub net mask: 255.255.255.224 *Mar 2 07:31:54.272: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 07:31:54.272: DHCP transaction id: 6C34389 *Mar 2 07:31:54.272: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 07:31:54.272: Next timer fires after: 00:00:01 *Mar 2 07:31:54.272: Retry count: 3 Client-ID: cisco-0030.85f3.7040-Fa0/0 *Mar 2 07:31:54.272: Hostname: R4 *Mar 2 07:31:54.272: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 07:31:54.276: DHCP: SRelease: 279 bytes *Mar 2 07:31:55.348: RAC: DHCP stopped on interface FastEthernet0/0 R4(config-if)# *Mar 2 07:31:55.348: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 07:31:55.348: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R4(config-if)#no ip add dhcpno ip add dhcp  ip add dhcp  R4(config-if)# *Mar 2 07:32:00.552: DHCP: DHCP client process started: 10 *Mar 2 07:32:00.552: RAC: Starting DHCP discover on FastEthernet0/0 *Mar 2 07:32:00.556: DHCP: Try 1 to acquire address for FastEthernet0/0 *Mar 2 07:32:00.568: DHCP: allocate request *Mar 2 07:32:00.572: DHCP: zapping entry in DHC_PURGING state for Fa0/0 *Mar 2 07:32:00.572: DHCP: new entry. add to queue *Mar 2 07:32:00.572: DHCP: SDiscover attempt # 1 for entry: *Mar 2 07:32:00.572: Temp IP addr: 0.0.0.0 for peer on Interface: FastEthernet0/0 *Mar 2 07:32:00.572: Temp sub net mask: 0.0.0.0 *Mar 2 07:32:00.572: DHCP Lease server: 0.0.0.0, state: 1 Selecting R4(config-if)# *Mar 2 07:32:00.572: DHCP transaction id: 6C45565 *Mar 2 07:32:00.572: Lease: 0 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 07:32:00.572: Next timer fires after: 00:00:03 *Mar 2 07:32:00.576: Retry count: 1 Client-ID: cisco-0030.85f3.7040-Fa0/0 *Mar 2 07:32:00.576: Hostname: R4 *Mar 2 07:32:00.576: DHCP: SDiscover: sending 294 byte length DHCP packet *Mar 2 07:32:00.576: DHCP: SDiscover 294 bytes *Mar 2 07:32:00.576: B'cast on FastEthernet0/0 interface from 0.0.0.0 R4(config-if)# *Mar 2 07:32:02.584: DHCP: Received a BOOTREP pkt *Mar 2 07:32:02.584: DHCP: Scan: Message type: DHCP Offer *Mar 2 07:32:02.584: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 07:32:02.584: DHCP: Scan: Lease Time: 86400 *Mar 2 07:32:02.584: DHCP: Scan: Renewal time: 43200 *Mar 2 07:32:02.588: DHCP: Scan: Rebind time: 75600 *Mar 2 07:32:02.588: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 07:32:02.588: DHCP: Scan: Router Option: 180.40.7.132 *Mar 2 07:32:02.588: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 07:32:02.588: DHCP: Scan: Domain Name: MyCCIE *Mar 2 07:32:02.588: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 07:32:02.588: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 07:32:02.588: UDP sport: 43, dport: 44, length: 308 *Mar 2 07:32:02.588: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 07:32:02.588: DHCP server identifier: 180.40.7.129 *Mar 2 07:32:02.588: R4(config-if)# xid: 6C45565, secs: 0, flags: 8000 *Mar 2 07:32:02.588: client: 0.0.0.0, your: 180.40.7.135 *Mar 2 07:32:02.592: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 07:32:02.592: options block length: 60 *Mar 2 07:32:02.592: DHCP Offer Message Offered Address: 180.40.7.135 *Mar 2 07:32:02.592: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 07:32:02.592: DHCP: Server ID Option: 180.40.7.129 *Mar 2 07:32:02.592: DHCP: offer received from 180.40.7.129 *Mar 2 07:32:02.592: DHCP: SRequest attempt # 1 for entry: *Mar 2 07:32:02.592: Temp IP addr: 180.40.7.135 for peer on Interface: FastEthernet0/0 *Mar 2 07:32:02.592: Temp sub net mask: 255.255.255.224 *Mar 2 07:32:02.592: DHCP Lease server: 180.40.7.129, state: 2 Requesting *Mar 2 07:32:02.596: DHCP transaction id: 6C45565 *Mar 2 07:32:02.596: Lease: 86400 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 07:32:02.596: Next timer fires after: 00:00:01 *Mar 2 07:32:02.596: Retry count: 1 Client-ID: cisco-0030.85f3.7040-Fa0/0 *Mar 2 07:32:02.596: Hostname: R4 *Mar 2 07:32:02.596: DHCP: SRequest- Server ID option: 180.40.7.129 *Mar 2 07:32:02.596: DHCP: SRequest- Requested IP addr option: 180.40.7.135 *Mar 2 07:32:02.596: DHCP: SRequest placed lease len option: 86400 *Mar 2 07:32:02.596: DHCP: SRequest: 312 bytes *Mar 2 07:32:02.596: DHCP: SRequest: 312 bytes *Mar 2 07:32:02.600: B'cast on FastEthernet0/0 interface from 0.0.0.0 *Mar 2 07:32:02.604: DHCP: Received a BOOTREP pkt *Mar 2 07:32:02.604: DHCP: Scan: Message type: DHCP Ack *Mar 2 07:32:02.604: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 07:32:02.608: DHCP: Scan: Lease Time: 86400 *Mar 2 07:32:02.608: DHCP: Scan: Renewal time: 43200 *Mar 2 07:32:02.608: DHCP: Scan: Rebind time: 75600 *Mar 2 07:32:02.608: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 07:32:02.608: DHCP: Scan: Router Option: 180.40.7.132 *Mar 2 07:32:02.608: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 07:32:02.608: DHCP: Scan: Domain Name: MyCCIE *Mar 2 07:32:02.608: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 07:32:02.608: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 07:32:02.608: UDP sport: 43, dport: 44, length: 308 *Mar 2 07:32:02.608: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 07:32:02.608: DHCP server identifier: 180.40.7.129 *Mar 2 07:32:02.612: xid: 6C45565, secs: 0, flags: 8000 *Mar 2 07:32:02.612: client: 0.0.0.0, your: 180.40.7.135 *Mar 2 07:32:02.612: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 07:32:02.612: options block length: 60 *Mar 2 07:32:02.612: DHCP Ack Message *Mar 2 07:32:02.612: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 07:32:02.612: DHCP: Server ID Option: 180.40.7.129 *Mar 2 07:32:05.620: DHCP: Releasing ipl options: *Mar 2 07:32:05.624: DHCP: Applying DHCP options: *Mar 2 07:32:05.624: Setting default_gateway to 180.40.7.132 *Mar 2 07:32:05.624: Adding default route 180.40.7.132 *Mar 2 07:32:06.624: Adding DNS server address 208.28.1.82 *Mar 2 07:32:06.624: Setting default domain to MyCCIE *Mar 2 07:32:06.624: DHCP Client Pooling: ***Allocated IP address: 180.40.7.135 *Mar 2 07:32:06.720: Allocated IP address = 180.40.7.135 255.255.255.224 *Mar 2 07:32:06.720: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.135, mask 255.255.255.224, hostname R4 R4(config-if)# R4(config-if)# *Mar 2 07:32:15.632: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 2 07:32:16.056: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from LOADING to FULL, Loading Done R4(config-if)# *Mar 2 07:32:25.272: DHCP: QScan: Purging entry *Mar 2 07:32:25.272: DHCP: deleting entry 62FD5F5C 0.0.0.0 from list *Mar 2 07:32:25.272: Temp IP addr: 0.0.0.0 for peer on Interface: unknown *Mar 2 07:32:25.272: Temp sub net mask: 255.255.255.224 *Mar 2 07:32:25.272: DHCP Lease server: 180.40.7.129, state: 8 Purging *Mar 2 07:32:25.272: DHCP transaction id: 6C34389 *Mar 2 07:32:25.272: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 07:32:25.272: Temp default-gateway addr: 180.40.7.132 *Mar 2 07:32:25.272: No timer running *Mar 2 07:32:25.272: Retry count: 0 Client-ID: *Mar 2 07:32:25.272: Hostname: R4 R4(config-if)# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Mar R3#sh ip dhcp d bin R3#sh ip dhcp binding Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 180.40.7.135 0063.6973.636f.2d30. Mar 03 1993 07:29 AM Automatic 3033.302e.3835.6633. 2e37.3034.302d.4661. 302f.30 R3# R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip dhcp R4Pool ^ % Invalid input detected at '^' marker. R3(config)#ip dhcp R4PoolpR4PooloR4PooloR4PoollR4Pool R4Pool R3(dhcp-config)#cli R3(dhcp-config)#client-i R3(dhcp-config)#client-identifier 0063.6973.636f.2d30.3033.302e.3835.6633.2e3$tifier 0063.6973.636f.2d30.3033.302e.3835.6633.2e37 .3034.3023.6973.636f.2d30.3033.302e.3835.6633.2e37.3034.302d .4661.302f.2d30.3033.302e.3835.6633.2e37.3034.302d.4661.302f .30 R3(dhcp-config)#ho R3(dhcp-config)#host 180.40.07  7.130 /27 R3(dhcp-config)#^Z R3#sh i *Mar 2 07:32:03.014: %SYS-5-CONFIG_I: Configured from console by console R3#sh ip dhcp bin Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 180.40.7.130 0063.6973.636f.2d30. Infinite Manual 3033.302e.3835.6633. 2e37.3034.302d.4661. 302f.30 180.40.7.135 0063.6973.636f.2d30. Mar 03 1993 07:29 AM Automatic 3033.302e.3835.6633. 2e37.3034.302d.4661. 302f.30 R3# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4(config-if)#^Z R4#sh ip *Mar 2 07:34:41.820: %SYS-5-CONFIG_I: Configured from console by console R4#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 180.40.7.135 YES DHCP up up ATM1/0 unassigned YES unset administratively down down Loopback0 100.1.1.1 YES manual up up R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int fa 0/0 R4(config-if)#shut *Mar 2 07:34:58.208: DHCP: SRelease attempt # 1 for entry: *Mar 2 07:34:58.208: Temp IP addr: 180.40.7.135 for peer on Interface: FastEthernet0/0 *Mar 2 07:34:58.208: Temp sub net mask: 255.255.255.224 *Mar 2 07:34:58.208: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 07:34:58.208: DHCP transaction id: 6C45565 *Mar 2 07:34:58.208: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 07:34:58.208: Temp default-gateway addr: 180.40.7.132 *Mar 2 07:34:58.208: Next timer fires after: 00:00:01 *Mar 2 07:34:58.208: Retry count: 1 Client-ID: cisco-0030.85f3.7040-Fa0/0 *Mar 2 07:34:58.208: Hostname: R4 *Mar 2 07:34:58.212: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 07:34:58.212: DHCP: SRelease: 279 bytes *Mar 2 07:34:58.276: DHCP: SRelease attempt # 2 for entry: *Mar 2 07:34:58.276: Temp IP addr: 180.40.7.135 for peer on Interface: FastEthernet0/0 *Mar 2 07:34:58.276: Temp sub net mask: 255.255.255.224 *Mar 2 07:34:58.276: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 07:34:58.276: DHCP transaction id: 6C45565 *Mar 2 07:34:58.276: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 07:34:58.276: Temp default-gateway addr: 180.40.7.132 *Mar 2 07:34:58.276: Next timer fires after: 00:00:00 *Mar 2 07:34:58.276: Retry count: 2 Client-ID: cisco-0030.85f3.7040-Fa0/0 *Mar 2 07:34:58.276: Hostname: R4 *Mar 2 07:34:58.280: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 07:34:58.280: DHCP: SRelease: 279 bytes *Mar 2 07:34:58.280: DHCP: Releasing ipl options: *Mar 2 07:34:58.280: Clearing default gateway and route to 180.40.7.132 *Mar 2 07:34:58.280: Removing old default route 180.40.7.132 *Mar 2 07:34:58.284: Clearing DNS address 208.28.1.82 *Mar 2 07:34:58.284: Clearing R4(config-if)#default domain of MyCCIE *Mar 2 07:34:59.208: DHCP: SRelease attempt # 3 for entry: *Mar 2 07:34:59.208: Temp IP addr: 180.40.7.135 for peer on Interface: FastEthernet0/0 *Mar 2 07:34:59.208: Temp sub net mask: 255.255.255.224 *Mar 2 07:34:59.208: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 07:34:59.208: DHCP transaction id: 6C45565 *Mar 2 07:34:59.208: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 07:34:59.208: Next timer fires after: 00:00:01 *Mar 2 07:34:59.208: Retry count: 3 Client-ID: cisco-0030.85f3.7040-Fa0/0 *Mar 2 07:34:59.208: Hostname: R4 *Mar 2 07:34:59.208: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 07:34:59.212: DHCP: SRelease: 279 bytes *Mar 2 07:35:00.284: RAC: DHCP stopped on interface FastEthernet0/0 R4(config-if)# *Mar 2 07:35:00.284: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 07:35:00.284: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R4(config-if)#nm *Mar 2 07:35:02.288: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to administratively down *Mar 2 07:35:03.288: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down R4(config-if)#nm =   RACK9AS>6 [Resuming connection 6 to r6 ... ] 1d07 S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 0/4 S6(config-if)#spa   sw S6(config-if)#switchport mode access S6(config-if)#sp S6(config-if)#spn an S6(config-if)#spanning-tree fo  p S6(config-if)#spanning-tree portt f S6(config-if)#spanning-tree portfast %Warning: portfast should only be enabled on ports connected to a single host. Connecting hubs, concentrators, switches, bridges, etc... to this interface when portfast is enabled, can cause temporary bridging loops. Use with CAUTION %Portfast has been configured on FastEthernet0/4 but will only have effect when the interface is in a non-trunking mode. S6(config-if)#^Z S6# RACK9AS>4 [Resuming connection 4 to r4 ... ] R4(config-if)#no shut R4(config-if)# *Mar 2 07:35:30.208: DHCP: QScan: Purging entry *Mar 2 07:35:30.208: DHCP: deleting entry 62E70A98 180.40.7.135 from list *Mar 2 07:35:30.208: Temp IP addr: 180.40.7.135 for peer on Interface: FastEthernet0/0 *Mar 2 07:35:30.208: Temp sub net mask: 255.255.255.224 *Mar 2 07:35:30.208: DHCP Lease server: 180.40.7.129, state: 8 Purging *Mar 2 07:35:30.208: DHCP transaction id: 6C45565 *Mar 2 07:35:30.208: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 07:35:30.208: No timer running *Mar 2 07:35:30.208: Retry count: 0 Client-ID: cisco-0030.85f3.7040-Fa0/0 *Mar 2 07:35:30.208: Hostname: R4 R4(config-if)# *Mar 2 07:35:30.588: DHCP: DHCP client process started: 10 *Mar 2 07:35:30.592: RAC: Delaying starting DHCP because interface FastEthernet0/0 not up R4(config-if)# *Mar 2 07:35:32.580: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up R4(config-if)# *Mar 2 07:35:35.172: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up *Mar 2 07:35:35.172: DHCP: DHCP client process started: 10 *Mar 2 07:35:35.172: RAC: Starting DHCP discover on FastEthernet0/0 *Mar 2 07:35:35.176: DHCP: Try 1 to acquire address for FastEthernet0/0 *Mar 2 07:35:35.188: DHCP: allocate request *Mar 2 07:35:35.188: DHCP: new entry. add to queue *Mar 2 07:35:35.192: DHCP: SDiscover attempt # 1 for entry: *Mar 2 07:35:35.192: Temp IP addr: 0.0.0.0 for peer on Interface: FastEthernet0/0 *Mar 2 07:35:35.192: Temp sub net mask: 0.0.0.0 *Mar 2 07:35:35.192: DHCP Lease server: 0.0.0.0, state: 1 Selecting *Mar 2 07:35:35.192: DHCP transaction id: 6C7988A *Mar 2 07:35:35.192: Lease: 0 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 07:35:35.192: Next timer fires after: 00:00:03 *Mar 2 07:35:35.192: Retry count: 1 Client-ID: cisco-0030.85f3.7040-Fa0/0 *Mar 2 07:35:35.192: Hostname: R4 *Mar R4(config-if)# 2 07:35:35.196: DHCP: SDiscover: sending 294 byte length DHCP packet *Mar 2 07:35:35.196: DHCP: SDiscover 294 bytes *Mar 2 07:35:35.196: B'cast on FastEthernet0/0 interface from 0.0.0.0 *Mar 2 07:35:35.200: DHCP: Received a BOOTREP pkt *Mar 2 07:35:35.200: DHCP: Scan: Message type: DHCP Offer *Mar 2 07:35:35.200: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 07:35:35.204: DHCP: Scan: Lease Time: 86400 *Mar 2 07:35:35.204: DHCP: Scan: Renewal time: 43200 *Mar 2 07:35:35.204: DHCP: Scan: Rebind time: 75600 *Mar 2 07:35:35.204: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 07:35:35.204: DHCP: Scan: Router Option: 180.40.7.132 *Mar 2 07:35:35.204: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 07:35:35.204: DHCP: Scan: Domain Name: MyCCIE *Mar 2 07:35:35.204: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 07:35:35.204: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 07:35:35.204: UDP sport: 43, dport: 44, length: 308 *Mar 2 07:35:35.204: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 07:35:35.208: DHCP server identifier: 180.40.7.129 *Mar 2 07:35:35.208: xid: 6C7988A, secs: 0, flags: 8000 *Mar 2 07:35:35.208: client: 0.0.0.0, your: 180.40.7.130 *Mar 2 07:35:35.208: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 07:35:35.208: options block length: 60 *Mar 2 07:35:35.208: DHCP Offer Message Offered Address: 180.40.7.130 *Mar 2 07:35:35.208: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 07:35:35.208: DHCP: Server ID Option: 180.40.7.129 *Mar 2 07:35:35.208: DHCP: offer received from 180.40.7.129 *Mar 2 07:35:35.208: DHCP: SRequest attempt # 1 for entry: *Mar 2 07:35:35.208: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/0 *Mar 2 07:35:35.212: Temp sub net mask: 255.255.255.224 *Mar 2 07:35:35.212: DHCP Lease server: 180.40.7.129, state: 2 Requesting *Mar 2 07:35:35.212: DHCP transaction id: 6C7988A *Mar 2 07:35:35.212: Lease: 86400 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 07:35:35.212: Next timer fires after: 00:00:01 *Mar 2 07:35:35.212: Retry count: 1 Client-ID: cisco-0030.85f3.7040-Fa0/0 *Mar 2 07:35:35.212: Hostname: R4 *Mar 2 07:35:35.212: DHCP: SRequest- Server ID option: 180.40.7.129 *Mar 2 07:35:35.212: DHCP: SRequest- Requested IP addr option: 180.40.7.130 *Mar 2 07:35:35.212: DHCP: SRequest placed lease len option: 86400 *Mar 2 07:35:35.216: DHCP: SRequest: 312 bytes *Mar 2 07:35:35.216: DHCP: SRequest: 312 bytes *Mar 2 07:35:35.216: B'cast on FastEthernet0/0 interface from 0.0.0.0 *Mar 2 07:35:35.220: DHCP: Received a BOOTREP pkt *Mar 2 07:35:35.220: DHCP: Scan: Message type: DHCP Ack *Mar 2 07:35:35.220: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 07:35:35.224: DHCP: Scan: Lease Time: 86400 *Mar 2 07:35:35.224: DHCP: Scan: Renewal time: 43200 *Mar 2 07:35:35.224: DHCP: Scan: Rebind time: 75600 *Mar 2 07:35:35.224: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 07:35:35.224: DHCP: Scan: Router Option: 180.40.7.132 *Mar 2 07:35:35.224: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 07:35:35.224: DHCP: Scan: Domain Name: MyCCIE *Mar 2 07:35:35.224: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 07:35:35.224: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 07:35:35.224: UDP sport: 43, dport: 44, length: 308 *Mar 2 07:35:35.224: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 07:35:35.228: DHCP server identifier: 180.40.7.129 *Mar 2 07:35:35.228: xid: 6C7988A, secs: 0, flags: 8000 *Mar 2 07:35:35.228: client: 0.0.0.0, your: 180.40.7.130 *Mar 2 07:35:35.228: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 07:35:35.228: options block length: 60 *Mar 2 07:35:35.228: DHCP Ack Message *Mar 2 07:35:35.228: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 07:35:35.228: DHCP: Server ID Option: 180.40.7.129 *Mar 2 07:35:38.236: DHCP: Releasing ipl options: *Mar 2 07:35:38.240: DHCP: Applying DHCP options: *Mar 2 07:35:38.240: Setting default_gateway to 180.40.7.132 *Mar 2 07:35:38.240: Adding default route 180.40.7.132 *Mar 2 07:35:39.240: Adding DNS server address 208.28.1.82 *Mar 2 07:35:39.240: Setting default domain to MyCCIE *Mar 2 07:35:39.240: DHCP Client Pooling: ***Allocated IP address: 180.40.7.130 *Mar 2 07:35:39.292: Allocated IP address = 180.40.7.130 255.255.255.224 *Mar 2 07:35:39.292: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.130, mask 255.255.255.224, hostname R4 R4(config-if)# R4(config-if)# *Mar 2 07:35:46.076: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 2 07:35:46.076: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done R4(config-if)#^Z R4# *Mar 2 07:36:49.108: %SYS-5-CONFIG_I: Configured from console by console R4#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 180.40.7.132 to network 0.0.0.0 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/793] via 180.40.7.129, 00:01:00, FastEthernet0/0 [110/793] via 180.40.7.131, 00:01:00, FastEthernet0/0 O 20.10.1.0 [110/783] via 180.40.7.129, 00:01:00, FastEthernet0/0 [110/783] via 180.40.7.131, 00:01:00, FastEthernet0/0 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:01:00, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 5 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/782] via 180.40.7.129, 00:01:01, FastEthernet0/0 [110/782] via 180.40.7.131, 00:01:01, FastEthernet0/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:01:01, FastEthernet0/0 --More--  O 180.40.7.0/27 [110/782] via 180.40.7.129, 00:01:08, FastEthernet0/0 O 180.40.7.64/27 [110/782] via 180.40.7.131, 00:01:08, FastEthernet0/0 [110/782] via 180.40.7.129, 00:01:08, FastEthernet0/0 S* 0.0.0.0/0 [254/0] via 180.40.7.132 R4# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Mar R3#sh run | b ip dhcp ip dhcp excluded-address 180.40.7.129 ip dhcp excluded-address 180.40.7.131 180.40.7.134 ! ip dhcp pool Prob15 network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 dns-server 208.28.1.82 domain-name MyCCIE option 150 ip 20.20.20.20 ! ip dhcp pool R4Pool host 180.40.7.130 255.255.255.224 client-identifier 0063.6973.636f.2d30.3033.302e.3835.6633.2e37.3034.302d.4661.302f.30 ! ip cef no ip domain lookup ip audit po max-events 100 ! ! ! ! ! --More--   R3# RACK9AS>7 [Resuming connection 7 to r7 ... ] *Ma R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/1 R7(config-if)#ip hel R7(config-if)#ip help R7(config-if)#ip helper-address 180.40.7.66 R7(config-if)#^Z R7# RACK9AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#ip add dhcp R3(config-if)# *Mar 2 07:37:36.773: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 07:37:36.773: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R3(config-if)# *Mar 2 07:37:36.773: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Init *Mar 2 07:37:36.777: %VRRP-6-STATECHANGE: Fa0/0 Grp 50 state Backup -> Disable R3(config-if)#^Z R3# *Mar 2 07:37:43.949: %SYS-5-CONFIG_I: Configured from console by console R3# *Mar 2 07:37:47.311: %VRRP-6-STATECHANGE: Fa0/0 Grp 50 state Init -> Backup *Mar 2 07:37:47.315: %VRRP-6-STATECHANGE: Fa0/0 Grp 50 state Backup -> Disable *Mar 2 07:37:47.315: %VRRP-6-STATECHANGE: Fa0/0 Grp 50 state Init -> Backup R3# *Mar 2 07:37:48.429: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.136, mask 255.255.255.224, hostname R3 *Mar 2 07:37:48.953: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Listen -> Active R3# RACK9AS>7 [Resuming connection 7 to r7 ... ] *Ma2: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/1 from FULL to DOWN, Neighbor Down: Dead timer expired R7# R7#sh run int fa 0/1 Building configuration... Current configuration : 254 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 speed auto half-duplex vrrp 50 ip 180.40.7.133 vrrp 50 priority 150 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7# *Mar 2 07:38:10.909: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/1 from LOADING to FULL, Loading Done R7# R7# RACK9AS>3 [Resuming connection 3 to r3 ... ] *Ma R3#sh ip dhcp % Incomplete command. R3#sh ip dhcp bi Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 180.40.7.130 0063.6973.636f.2d30. Infinite Manual 3033.302e.3835.6633. 2e37.3034.302d.4661. 302f.30 180.40.7.136 0063.6973.636f.2d30. Mar 03 1993 07:37 AM Automatic 3031.322e.3766.3865. 2e62.3663.302d.4661. 302f.30 R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0- ^ % Invalid input detected at '^' marker. R3(config)#int fa 0/0-  R3(config-if)#ip add 180.40.7.                ip address 180.40.7.129 255.255.255.224 R3(config-if)#^Z R3# *Mar 2 07:40:18.743: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 07:40:18.747: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 07:40:18.747: %VRRP-6-STATECHANGE: Fa0/0 Grp 50 state Backup -> Disable *Mar 2 07:40:18.747: %VRRP-6-STATECHANGE: Fa0/0 Grp 50 state Init -> Backup *Mar 2 07:40:18.751: %VRRP-6-STATECHANGE: Fa0/0 Grp 50 state Backup -> Disable *Mar 2 07:40:18.751: %VRRP-6-STATECHANGE: Fa0/0 Grp 50 state Init -> Backup R3#wr Building configuration... *Mar 2 07:40:19.624: %SYS-5-CONFIG_I: Configured from console by console *Mar 2 07:40:25.346: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 2 07:40:27.501: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done[OK] R3#u all All possible debugging has been turned off R3#