=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2006.11.15 06:46:08 =~=~=~=~=~=~=~=~=~=~=~= c sh acces-lists-list R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)# R7(config)#access-list 1 per 208.28.1.2 R7(config)#cla R7(config)#class-map S5  Telnet R7(config-cmap)#match acc R7(config-cmap)#match access-group 1 R7(config-cmap)#match pro R7(config-cmap)#match protocol telnet R7(config-cmap)#exit R7(config)#class R7(config)#class-map S5Other R7(config-cmap)#class-map S5Otherexit match protocol telnetaccess-group 1 R7(config-cmap)#exit R7(config)#class R7(config)#class-map jpeg R7(config-cmap)#ma R7(config-cmap)#match t ht R7(config-cmap)#match ht   p  pr R7(config-cmap)#match pro R7(config-cmap)#match protocol h R7(config-cmap)#match protocol http ? host Server Host Name mime Match MIME Type url Match URL String R7(config-cmap)#match protocol http mime ? WORD Enter a string as the sub-protocol parameter R7(config-cmap)#match protocol http mime &*  *.jpg R7(config-cmap)#match protocol http mime *.jpg e R7(config-cmap)#match protocol http mime *.jpeg R7(config-cmap)#match protocol http mime *.jpeg           ur R7(config-cmap)#match protocol http url *.jgp  pg R7(config-cmap)#match protocol http url *.jpg e R7(config-cmap)#match protocol http url *.jpe eg R7(config-cmap)#do sh run | b class class-map match-all jpeg match protocol http mime "*.jpg" match protocol http mime "*.jpe" match protocol http mime "*.jpeg" match protocol http url "*.jpg" match protocol http url "*.jpe" match protocol http url "*.jpeg" class-map match-all S5Other match access-group 1 class-map match-all S5Telnet match access-group 1 match protocol telnet ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex ! --More--   R7(config-cmap)#do sh run | b classmatch protocol http url *.jpeg gmime *.jpeg gclass-map jpeg exit class-map jpegexit  R7(config)#exitdo sh run | b classmatch protocol http url *.jpeg gmime *.jpeg gclass-map jpeg mjpegajpegtjpegcjpeghjpeg jpegjpeg -jpegajpegnjpegyjpeg jpeg R7(config-cmap)#class-map match-any jpegexit do sh run | b class class-map match-any jpeg match protocol http mime "*.jpg" match protocol http mime "*.jpe" match protocol http mime "*.jpeg" match protocol http url "*.jpg" match protocol http url "*.jpe" match protocol http url "*.jpeg" class-map match-all S5Other match access-group 1 class-map match-all S5Telnet match access-group 1 match protocol telnet ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex ! --More--   R7(config-cmap)#exit R7(config)#pol R7(config)#policy-map Prob5 ? R7(config)#policy-map Prob5 R7(config-pmap)#class R7(config-pmap)#class S5Telnet R7(config-pmap-c)#ba R7(config-pmap-c)#bandwidth ? <8-2000000> Kilo Bits per second percent % of total Bandwidth remaining % of the remaining bandwidth R7(config-pmap-c)#bandwidth 1 ^ % Invalid input detected at '^' marker. R7(config-pmap-c)#bandwidth 1000 R7(config-pmap-c)#exit R7(config-pmap)#class je peg R7(config-pmap-c)#sh R7(config-pmap-c)#shape ? adaptive Enable Traffic Shaping adaptation to BECN average configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc only per interval fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fr-voice-adapt Enable rate adjustment depending on voice presence max-buffers Set Maximum Buffer Limit peak configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc+Be per interval R7(config-pmap-c)#shape av R7(config-pmap-c)#shape average ? <8000-154400000> Target Bit Rate (bits per second), the value needs to be multiple of 8000 percent % of interface bandwidth for Committed information rate R7(config-pmap-c)#shape average 1000000 ? <256-154400000> bits per interval, sustained. Needs to be multiple of 128. Recommend not to configure it, the algorithm will find out the best value R7(config-pmap-c)#shape average 1000000 R7(config-pmap-c)#exit R7(config-pmap)#class R7(config-pmap)#class S5Other R7(config-pmap-c)#pol R7(config-pmap-c)#police ? <8000-2000000000> Bits per second cir Committed information rate R7(config-pmap-c)#police cir ? <8000-2000000000> Bits per second percent % of interface bandwidth for Committed information rate R7(config-pmap-c)#police cir 5000000 ? <1000-512000000> Burst bytes bc Conform burst conform-action action when rate is less than conform burst pir Peak Information Rate R7(config-pmap-c)#police cir 5000000 ? <1000-512000000> Burst bytes bc Conform burst conform-action action when rate is less than conform burst pir Peak Information Rate R7(config-pmap-c)#police cir 5000000  5000000  5000000  5000000 5000000  5000000  e 5c5000000 i5000000 r5000000  5000000 5000000 5000000 5000000 5000000 5000000 con R7(config-pmap-c)#police 5000000 conform-action ? drop drop packet exceed-action action when rate is within conform and conform + exceed burst set-clp-transmit set atm clp and send it set-discard-class-transmit set discard-class and send it set-dscp-transmit set dscp and send it set-frde-transmit set FR DE and send it set-mpls-exp-imposition-transmit set exp at tag imposition and send it set-mpls-exp-topmost-transmit set exp on topmost label and send it set-prec-transmit rewrite packet precedence and send it set-qos-transmit set qos-group and send it transmit transmit packet R7(config-pmap-c)#police 5000000 conform-action se R7(config-pmap-c)#police 5000000 conform-action set-p R7(config-pmap-c)#police 5000000 conform-action set-prec-transmit 3 ? exceed-action action when rate is within conform and conform + exceed burst R7(config-pmap-c)#police 5000000 conform-action set-prec-transmit 3 ex R7(config-pmap-c)#$000 conform-action set-prec-transmit 3 exceed-action se R7(config-pmap-c)#$000 conform-action set-prec-transmit 3 exceed-action set-p R7(config-pmap-c)#$et-prec-transmit 3 exceed-action set-prec-transmit 21  1 ? violate-action action when rate is greater than conform + exceed burst R7(config-pmap-c)#$et-prec-transmit 3 exceed-action set-prec-transmit 1 R7(config-pmap-c-police)#int s fa 0/1 R7(config-if)#ser R7(config-if)#service-policy ou R7(config-if)#service-policy output Prob6 5 R7(config-if)#^Z R7#sh pol R7#sh policy-map *Mar 1 13:34:10.138: %SYS-5-CONFIG_I: Configured from console by console R7#sh policy-map int fa 0/1 FastEthernet0/1 Service-policy output: Prob5 Class-map: S5Telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 1 Match: protocol telnet Queueing Output Queue: Conversation 265 Bandwidth 1000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: jpeg (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http mime "*.jpg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http mime "*.jpe" 0 packets, 0 bytes --More--   5 minute rate 0 bps Match: protocol http mime "*.jpeg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpe" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpeg" 0 packets, 0 bytes 5 minute rate 0 bps Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 1000000/1000000 6250 25000 25000 25 3125 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: S5Other (match-all) --More--   0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 1 police: cir 5000000 bps, bc 156250 bytes conformed 0 packets, 0 bytes; actions: set-prec-transmit 3 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 1 conformed 0 bps, exceed 0 bps Class-map: class-default (match-any) 1 packets, 60 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R7#sh run int fa 0/1 Building configuration... Current configuration : 128 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 speed auto half-duplex service-policy output Prob5 end R7#sh run | b pol policy-map Prob5 class S5Telnet bandwidth 1000 class jpeg shape average 1000000 class S5Other police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex ! interface BRI0/0 no ip address shutdown ! --More--   R7#q  RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)# R3(config)#class-map match-all dscp12 R3(config-cmap)# match dscp af12 R3(config-cmap)#class-map match-all dscp14 R3(config-cmap)# match dscp af13 R3(config-cmap)#class-map match-all dscp26 R3(config-cmap)# match dscp af31 R3(config-cmap)#class-map match-all dscp28 R3(config-cmap)# match dscp af32 R3(config-cmap)#class-map match-all prec3 R3(config-cmap)# match ip precedence 3 R3(config-cmap)#policy-map test R3(config-pmap)# class dscp12 R3(config-pmap-c)# class dscp14 R3(config-pmap-c)# class dscp26 R3(config-pmap-c)# class dscp28 R3(config-pmap-c)# class prec3 R3(config-pmap-c)#interface FastEthernet0/0 R3(config-if)# service-policy input test R3(config-if)# R3(config-if)#^Z R3# *Mar 1 23:58:59.982: %SYS-5-CONFIG_I: Configured from console by console R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: class-default (match-any) 16 packets, 1568 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# RACK18AS>5 [Resuming connection 5 to r5 ... ] 1 S5#ping 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5#sh pol int fa 0/.1 ^ % Invalid input detected at '^' marker. S5#sh pol int fa 0/.11  % Ambiguous command: "sh pol int fa 0/1" S5#sh pol int fa 0/1 % Ambiguous command: "sh pol int fa 0/1" S5#sh pol int fa 0/10/1  % Ambiguous command: "sh pol int fa0/1" S5#sh pol int fa0/1t i int fa0/1 % Ambiguous command: "sh poli int fa0/1" S5#sh poli int fa0/1             S5#sh pol S5#sh policy-map S5#sh policy-map int  S5#sh policy-map int fa 0/1 S5#sh run int fa 0/                 RACK18AS>7 [Resuming connection 7 to r7 ... ] R7#sh pol int fa 0/.1 ^ % Invalid input detected at '^' marker. R7#sh pol int fa 0/.11  FastEthernet0/1 Service-policy output: Prob5 Class-map: S5Telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 1 Match: protocol telnet Queueing Output Queue: Conversation 265 Bandwidth 1000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: jpeg (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http mime "*.jpg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http mime "*.jpe" 0 packets, 0 bytes --More--   5 minute rate 0 bps Match: protocol http mime "*.jpeg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpe" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpeg" 0 packets, 0 bytes 5 minute rate 0 bps Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 1000000/1000000 6250 25000 25000 25 3125 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: S5Other (match-all) --More--   5 packets, 570 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 1 police: cir 5000000 bps, bc 156250 bytes conformed 5 packets, 570 bytes; actions: set-prec-transmit 3 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 1 conformed 0 bps, exceed 0 bps Class-map: class-default (match-any) 81 packets, 8222 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R7# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: class-default (match-any) 36 packets, 3528 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# RACK18AS>5 [Resuming connection 5 to r5 ... ] S5#sh policy-map int fa 0/1 int fa0/1  int fa0/1  0/1.1ping 180.40.7.129 180.40.7.129 180.40.7.129 180.40.7.129 180.40.7.129 180.40.7.129  Trying 180.40.7.129 ... Open R3# R3# R3#sh pol int fa 0/1 R3#sh pol int fa 0/1 0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: class-default (match-any) 124 packets, 10449 bytes 5 minute offered rate 1000 bps, drop rate 0 bps Match: any R3#1 q [Connection to 180.40.7.129 closed by foreign host] S5# S5# RACK18AS>7 [Resuming connection 7 to r7 ... ] R7#sh pol int fa 0/1 FastEthernet0/1 Service-policy output: Prob5 Class-map: S5Telnet (match-all) 55 packets, 3040 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 1 Match: protocol telnet Queueing Output Queue: Conversation 265 Bandwidth 1000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: jpeg (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http mime "*.jpg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http mime "*.jpe" 0 packets, 0 bytes --More--   R7#sh run | b class class-map match-any jpeg match protocol http mime "*.jpg" match protocol http mime "*.jpe" match protocol http mime "*.jpeg" match protocol http url "*.jpg" match protocol http url "*.jpe" match protocol http url "*.jpeg" class-map match-all S5Other match access-group 1 class-map match-all S5Telnet match access-group 1 match protocol telnet ! ! policy-map Prob5 class S5Telnet bandwidth 1000 class jpeg shape average 1000000 class S5Other police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 ! --More--  ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 speed auto half-duplex service-policy output Prob5 ! interface Serial1/0 no ip address encapsulation frame-relay --More--   R7#sh run \ | i access-li access-list 1 permit 208.28.1.2 R7# R7#sh ip nb R7#sh ip nbar ? filter Show current NBAR's filter criteria pdlm Show currently installed PDLMs (PDL modules) port-map Show StILE Protocol Port Map protocol-discovery Show traffic classes and statistics resources Show memory configuration for tracking Stateful sessions trace Show NBAR's state-graph trace unclassified-port-stats Show NBAR's port statistics for unclassified packets R7#sh ip nbar re R7#sh ip nbar resources NBAR memory usage for tracking Stateful sessions Max-age : 120 secs Initial memory : 2126 KBytes Max initial memory : 7090 KBytes Memory expansion : 56 KBytes Max memory expansion : 56 KBytes Memory in use : 2126 KBytes Max memory allowed : 14180 KBytes Active links : 0 Total links : 37982 R7#sh ip nbar resources           po R7#sh ip nbar port-map ? bgp Border Gateway Protocol citrix Citrix Traffic cuseeme CU-SeeMe desktop video conference custom-01 Custom protocol custom-01 custom-02 Custom protocol custom-02 custom-03 Custom protocol custom-03 custom-04 Custom protocol custom-04 custom-05 Custom protocol custom-05 custom-06 Custom protocol custom-06 custom-07 Custom protocol custom-07 custom-08 Custom protocol custom-08 custom-09 Custom protocol custom-09 custom-10 Custom protocol custom-10 dhcp Dynamic Host Configuration dns Domain Name Server lookup egp Exterior Gateway Protocol eigrp Enhanced Interior Gateway Routing Protocol exchange MS-RPC for Exchange fasttrack FastTrack Traffic - KaZaA, Morpheus, Grokster... finger Finger ftp File Transfer Protocol gnutella Gnutella Traffic - BearShare,LimeWire,Gnotella... --More--   R7#sh ip nbar port-map ftp port-map ftp tcp 21 R7# R7# R7# R7# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh ip nbap r re R3#sh ip nbar resources % Error: NBAR has not been activated R3# R3# R3# RACK18AS>z7 Translating "z7" Translating "z7" % Unknown command or computer name, or unable to find computer address RACK18AS> [Resuming connection 3 to r3 ... ] R3# RACK18AS>7 [Resuming connection 7 to r7 ... ] R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#pri R7(config)#prio R7(config)#priority-list ? <1-16> Priority list number R7(config)#priority-list 1 ? default Set priority queue for unspecified datagrams interface Establish priorities for packets from a named interface protocol priority queueing by protocol queue-limit Set queue limits for priority queues R7(config)#priority-list 1 pro R7(config)#priority-list 1 protocol ? aarp AppleTalk ARP appletalk AppleTalk arp IP ARP bridge Bridging bstun Block Serial Tunnel cdp Cisco Discovery Protocol clns ISO CLNS clns_es ISO CLNS End System clns_is ISO CLNS Intermediate System cmns ISO CMNS compressedtcp Compressed TCP decnet DECnet decnet_node DECnet Node decnet_router-l1 DECnet Router L1 decnet_router-l2 DECnet Router L2 dlsw Data Link Switching (Direct encapsulation only) ip IP ipv6 IPV6 ipx Novell IPX llc2 llc2 pad PAD links pppoe PPP over Ethernet --More--   R7(config)#priority-list 1 protocol p   op  ip ? high medium normal low R7(config)#priority-list 1 protocol ip high ? fragments Prioritize fragmented IP packets gt Prioritize packets greater than a specified size list To specify an access list lt Prioritize packets less than a specified size tcp Prioritize TCP packets 'to' or 'from' the specified port udp Prioritize UDP packets 'to' or 'from' the specified port R7(config)#priority-list 1 protocol ip high tcp ? <0-65535> Port number bgp Border Gateway Protocol (179) chargen Character generator (19) cmd Remote commands (rcmd, 514) daytime Daytime (13) discard Discard (9) domain Domain Name Service (53) echo Echo (7) exec Exec (rsh, 512) finger Finger (79) ftp File Transfer Protocol (21) ftp-data FTP data connections (20) gopher Gopher (70) hostname NIC hostname server (101) ident Ident Protocol (113) irc Internet Relay Chat (194) klogin Kerberos login (543) kshell Kerberos shell (544) login Login (rlogin, 513) lpd Printer service (515) nntp Network News Transport Protocol (119) pim-auto-rp PIM Auto-RP (496) --More--   pop2 Post Office Protocol v2 (109) pop3 Post Office Protocol v3 (110) smtp Simple Mail Transport Protocol (25) sunrpc Sun Remote Procedure Call (111) syslog Syslog (514) tacacs TAC Access Control System (49) talk Talk (517) telnet Telnet (23) time Time (37) uucp Unix-to-Unix Copy Program (540) whois Nicname (43) www World Wide Web (HTTP, 80) R7(config)#priority-list 1 protocol ip high tcp telnet R7(config)#pi R7(config)#pi  priority-list 1 protocol ip high tcp telnet               lo R7(config)#priority-list 1 protocol ip low ? fragments Prioritize fragmented IP packets gt Prioritize packets greater than a specified size list To specify an access list lt Prioritize packets less than a specified size tcp Prioritize TCP packets 'to' or 'from' the specified port udp Prioritize UDP packets 'to' or 'from' the specified port R7(config)#priority-list 1 protocol ip low tcp ? <0-65535> Port number bgp Border Gateway Protocol (179) chargen Character generator (19) cmd Remote commands (rcmd, 514) daytime Daytime (13) discard Discard (9) domain Domain Name Service (53) echo Echo (7) exec Exec (rsh, 512) finger Finger (79) ftp File Transfer Protocol (21) ftp-data FTP data connections (20) gopher Gopher (70) hostname NIC hostname server (101) ident Ident Protocol (113) irc Internet Relay Chat (194) klogin Kerberos login (543) kshell Kerberos shell (544) login Login (rlogin, 513) lpd Printer service (515) nntp Network News Transport Protocol (119) pim-auto-rp PIM Auto-RP (496) --More--   pop2 Post Office Protocol v2 (109) pop3 Post Office Protocol v3 (110) smtp Simple Mail Transport Protocol (25) sunrpc Sun Remote Procedure Call (111) syslog Syslog (514) tacacs TAC Access Control System (49) talk Talk (517) telnet Telnet (23) time Time (37) uucp Unix-to-Unix Copy Program (540) whois Nicname (43) www World Wide Web (HTTP, 80) R7(config)#priority-list 1 protocol ip low tcp 80 ? R7(config)#priority-list 1 protocol ip low tcp 80 R7(config)#do sh run | b prio ip ospf priority 0 frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 702 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 no ip address shutdown ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address --More--   shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ! no ip http server no ip http secure-server ! --More--  access-list 1 permit 208.28.1.2 priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! ! end R7(config)#do sh run | b prio priority-list 1 protocol ip low tcp 80               de R7(config)#priority-list 1 protocol decnet               de R7(config)#priority-list 1 default ? high medium normal low R7(config)#priority-list 1 default no R7(config)#priority-list 1 default normal R7(config)#priority-list 1 default normal do sh run | b prio rity-li priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! ! end R7(config)#do sh run | b priority-lipriority-list 1 default normal        me R7(config)#priority-list 1 default medium R7(config)#priority-list 1 default medium do sh run | b priority-li  priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www priority-list 1 default medium ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! ! end R7(config)# R7# *Mar 1 13:51:45.023: %SYS-5-CONFIG_I: Configured from console by console R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0.2 R7(config-subif)#opr   pri R7(config-subif)#pri R7(config-subif)#pri R7(config-subif)#pri R7(config-subif)#pri R7(config-subif)#pri? % Unrecognized command R7(config-subif)#pri   int s 1/0 R7(config-if)#pri R7(config-if)#priority-group 1 ? R7(config-if)#priority-group 1 R7(config-if)#end R7# *Mar 1 13:52:25.810: %SYS-5-CONFIG_I: Configured from console by console R7#deb pri R7#deb pri     ? IUA ISDN adaptation Layer options aaa AAA Authentication, Authorization and Accounting aal2_xgcpspi AAL2_XGCP Service Provider Interface. access-expression Boolean access expression adjacency adjacency alarm-interface Alarm Interface Card events all Enable all debugging alps ALPS debug information apple Appletalk information arap Appletalk Remote Access arp IP ARP and HP Probe transactions asnl Application Subscribe Notify Layer aspp ASPP information async Async interface information backhaul-session-manager Backhaul SM options backup Backup events bcm560x BCM560X L2 Driver bgp BGP information bri-interface bri network interface events bsc BSC information bstun BSTUN information call Call Information --More--   R7#deb qu R7#deb que R7#deb que? % Unrecognized command R7#deb que   pri? printer priority R7#deb prio R7#deb priority ? R7#deb priority Priority output queueing debugging is on R7# R7# R7# R7# R7#180. *Mar 1 13:52:50.386: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 13:52:50.398: PQ: Serial1/0 output (Pk size/Q 84/0) R7#180.40.7.162 Trying 180.40.7.162 ... Open R2# *Mar 1 13:52:57.518: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:52:57.518: PQ: Serial1/0 output (Pk size/Q 48/0) *Mar 1 13:52:57.558: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:52:57.558: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 1 13:52:57.562: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:52:57.562: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:52:57.562: PQ: Serial1/0 output (Pk size/Q 56/0) *Mar 1 13:52:57.566: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 1 13:52:57.602: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:52:57.602: PQ: Serial1/0 output (Pk size/Q 47/0) *Mar 1 13:52:57.606: PQ: Serial1/0: ip (tcp 23) -> high R2# R2# *Mar 1 13:52:57.606: PQ: Serial1/0 output (Pk size/Q 47/0) *Mar 1 13:52:57.606: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:52:57.606: PQ: Serial1/0 output (Pk size/Q 53/0) *Mar 1 13:52:57.614: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:52:57.618: PQ: Serial1/0 output (Pk size/Q 47/0) *Mar 1 13:52:57.830: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:52:57.830: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 1 13:52:58.555: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:52:58.555: PQ: Serial1/0 output (Pk size/Q 46/0) R2# *Mar 1 13:52:58.784: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:52:58.784: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 1 13:52:59.108: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:52:59.108: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 1 13:52:59.333: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:52:59.333: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 1 13:52:59.561: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:52:59.561: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 1 13:53:00.386: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 13:53:00.422: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 1 13:53:07.534: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 1 13:53:10.387: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 13:53:10.439: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 1 13:53:20.387: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 13:53:20.463: PQ: Serial1/0 output (Pk size/Q 84/0) R2# R2#q [Connection to 180.40.7.162 closed by foreign host] R7# *Mar 1 13:53:25.139: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:53:25.139: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 1 13:53:25.371: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:53:25.371: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 1 13:53:25.403: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:53:25.403: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 1 13:53:25.632: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:53:25.632: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 1 13:53:25.828: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:53:25.828: PQ: Serial1/0 output (Pk size/Q 45/0) *Mar 1 13:53:25.976: PQ: Serial1/0: ip (tcp 23) -> high R7# R7# R7# R7# *Mar 1 13:53:25.976: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 1 13:53:26.129: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:53:26.133: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 1 13:53:26.133: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 13:53:26.133: PQ: Serial1/0 output (Pk size/Q 44/0) R7# R7#confi gt ^ % Invalid input detected at '^' marker. R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#in *Mar 1 13:53:30.388: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 13:53:30.484: PQ: Serial1/0 output (Pk size/Q 84/0) R7(config)#int s 1/0 R7(config-if)#int s 1/0end priority-group 1 *Mar 1 13:53:37.095: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 1 13:53:37.095: PQ: Serial1/0 output (Pk size/Q 356/1) *Mar 1 13:53:37.095: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 1 13:53:37.139: PQ: Serial1/0 output (Pk size/Q 356/1) *Mar 1 13:53:37.495: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 1 13:53:37.852: PQ: Serial1/0: ip (defaulting) -> medium *Mar 1 13:53:37.856: PQ: Serial1/0 output (Pk size/Q 88/1) *Mar 1 13:53:37.892: PQ: Serial1/0: ip (defaulting) -> medium *Mar 1 13:53:37.892: PQ: Serial1/0 output (Pk size/Q 84/1) *Mar 1 13:53:37.900: PQ: Serial1/0: ip (defaulting) -> medium *Mar 1 13:53:37.900: PQ: Serial1/0: ip (defaulting) -> medium R7(config-if)#priority-group 1 *Mar 1 13:53:37.900: PQ: Serial1/0 output (Pk size/Q 88/1) *Mar 1 13:53:37.900: PQ: Serial1/0 output (Pk size/Q 84/1) R7(config-if)#priority-group 1  *Mar 1 13:53:40.388: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 13:53:40.424: PQ: Serial1/0 output (Pk size/Q 84/0) R7(config-if)#priority-group 1 npriority-group 1 opriority-group 1  priority-group 1  R7(config-if)#do y u all All possible debugging has been turned off R7(config-if)#exit R7(config)#map R7(config)#map-cl R7(config)#map-class fra R7(config)#map-class frame-relay Prob6 ? R7(config)#map-class frame-relay Prob6 R7(config-map-class)#? Static maps class configuration commands: default Set a command to its defaults exit-class Exit from static map class configuration mode frame-relay Configure Map parameters help Description of the interactive help system no Negate a command or set its defaults service-policy class-based service policy R7(config-map-class)#fra R7(config-map-class)#frame-relay ? adaptive-shaping Adaptive traffic rate adjustment, Default = none bc Committed burst size (Bc), Default = 7000 bits be Excess burst size (Be), Default = 0 bits cir Committed Information Rate (CIR), Default = 56000 bps congestion Congestion management parameters custom-queue-list VC custom queueing end-to-end Configure frame-relay end-to-end VC parameters fair-queue VC fair queueing fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fragment fragmentation - Requires Frame Relay traffic-shaping to be configured at the interface level holdq Hold queue size for VC idle-timer Idle timeout for a SVC, Default = 120 sec interface-queue PVC interface queue parameters ip Assign a priority queue for RTP streams mincir Minimum acceptable CIR, Default = CIR/2 bps priority-group VC priority queueing tc Policing Measurement Interval (Tc) traffic-rate VC traffic rate voice voice options R7(config-map-class)#frame-relay   pri R7(config-map-class)#frame-relay priority-group ? <1-16> Priority group number R7(config-map-class)#frame-relay priority-group 1 ? R7(config-map-class)#frame-relay priority-group 1 R7(config-map-class)#int s 1/0.2 R7(config-subif)#fram   R7(config-subif)#frame-relay cl R7(config-subif)#frame-relay class ? WORD map class name R7(config-subif)#frame-relay class Prob6 ? R7(config-subif)#frame-relay class Prob6 R7(config-subif)#do d    ^Z R7#deb *Mar 1 13:54:35.526: %SYS-5-CONFIG_I: Configured from console by console R7#deb prio Priority output queueing debugging is on R7# R7# R7# R7#deb prioconfig t gt180.40.7.162 Trying 180.40.7.162 ... Open R2# R2# R2# R2#q [Connection to 180.40.7.162 closed by foreign host] R7# R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0 R7(config-if)#fra R7(config-if)#fram R7(config-if)#frame-relay tr R7(config-if)#frame-relay traff R7(config-if)#frame-relay traffic-shaping R7(config-if)#end R7# *Mar 1 13:55:20.664: %SYS-5-CONFIG_I: Configured from console by console R7# R7# R7# R7#sh deb General network interfaces: Priority output queueing debugging is on R7#sh debconfig t180.40.7.162 Trying 180.40.7.162 ... Open R2# R2# R2# R2# R2#end Translating "end" Translating "end" % Unknown command or computer name, or unable to find computer address R2#q [Connection to 180.40.7.162 closed by foreign host] R7# R7# RACK18AS>2 [Resuming connection 2 to r2 ... ] *Mar R2#ping Protocol [ip]: Target IP address: 180.40.7.161 Repeat count [5]: 1000000 Datagram size [100]: Timeout in seconds [2]: 0 Extended commands [n]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 1000000, 100-byte ICMP Echos to 180.40.7.161, timeout is 0 seconds: ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ......................... RACK18AS>7 [Resuming connection 7 to r7 ... ] R7#180.40.7.162 Trying 180.40.7.162 ... Open RACK18AS>2 [Resuming connection 2 to r2 ... ] .................................................................................. ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ...................................................................... ........................... Success rate is 0 percent (0/31527) R2#x ping 180.40.7.161 re  p 100000 time 1 Type escape sequence to abort. Sending 100000, 100-byte ICMP Echos to 180.40.7.161, timeout is 1 seconds: !!!!!!!!!!!!!!!!!!!! RACK18AS>7 [Resuming connection 7 to r7 ... ] R2# R2# R2# R2#q [Connection to 180.40.7.162 closed by foreign host] R7#sh deb General network interfaces: Priority output queueing debugging is on R7#sh fram pvc PVC Statistics for interface Serial1/0 (Frame Relay DTE) Active Inactive Deleted Static Local 2 0 0 0 Switched 0 0 0 0 Unused 0 1 0 0 DLCI = 701, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = Serial1/0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 0 out bcast bytes 0 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 13:56:38, last time pvc status changed 13:56:38 --More--   DLCI = 702, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.2 input pkts 2828 output pkts 2830 in bytes 470836 out bytes 470968 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 2511 out bcast bytes 438584 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 13:56:50, last time pvc status changed 13:56:50 --More--   --More--  DLCI = 703, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.1 --More--   --More--   input pkts 5406 output pkts 8070 in bytes 478223 --More--   out bytes 940669 dropped pkts 18 in pkts dropped 18 --More--   out pkts dropped 0 out bytes dropped 0 --More--   in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 6142 out bcast bytes 748576 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 9000 bits/sec, 10 packets/sec pvc create time 13:56:54, last time pvc status changed 13:56:54 R7#sh run int s 1/0.2 Building configuration... Current configuration : 182 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay class Prob6 frame-relay interface-dlci 702 end R7#sh run int s 1/0 Building configuration... Current configuration : 113 bytes ! interface Serial1/0 no ip address encapsulation frame-relay no fair-queue frame-relay traffic-shaping end R7#sh run \ b ~   | b map-class map-class frame-relay Prob6 frame-relay priority-group 1 access-list 1 permit 208.28.1.2 priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www priority-list 1 default medium ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! --More--   R7#u all All possible debugging has been turned off R7#deb prio Priority output queueing debugging is on R7# RACK18AS>2 [Resuming connection 2 to r2 ... ] !!!!!!!!!!!!!!!!!!!!!! RACK18AS>7 [Resuming connection 7 to r7 ... ] R7#deb priou all sh run | b map-classint s 1/0 .2fram pvc deb 180.40.7.162 Trying 180.40.7.162 ... Open R2# R2# R2# R2# R2#q [Connection to 180.40.7.162 closed by foreign host] R7# R7# R7# RACK18AS>2 [Resuming connection 2 to r2 ... ] !!!!!!!!!!!!!!! !!!!!!!!!!!. Success rate is 99 percent (1411/1412), round-trip min/avg/max = 72/76/292 ms R2# RACK18AS>7 [Resuming connection 7 to r7 ... ] R7#sh rub    un        sh fram pc vc PVC Statistics for interface Serial1/0 (Frame Relay DTE) Active Inactive Deleted Static Local 2 0 0 0 Switched 0 0 0 0 Unused 0 1 0 0 DLCI = 701, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = Serial1/0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 0 out bcast bytes 0 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 13:58:21, last time pvc status changed 13:58:21 --More--   DLCI = 702, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.2 input pkts 2835 output pkts 2836 in bytes 472032 out bytes 472080 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 2516 out bcast bytes 439548 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 13:58:32, last time pvc status changed 13:58:32 --More--   --More--  DLCI = 703, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.1 --More--   --More--   input pkts 5418 output pkts 9204 in bytes 479339 --More--   R7#h   sh qur e R7#sh queuei R7#sh queueing int s 1/0.2 ^ % Invalid input detected at '^' marker. R7#sh queueing int s 1/0.2                    fram pvc ? interface <16-1022> DLCI | Output modifiers R7#sh fram pvc 702 PVC Statistics for interface Serial1/0 (Frame Relay DTE) DLCI = 702, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.2 input pkts 2836 output pkts 2837 in bytes 472116 out bytes 472164 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 2517 out bcast bytes 439632 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 13:59:04, last time pvc status changed 13:59:04 cir 56000 bc 7000 be 0 byte limit 875 interval 125 mincir 28000 byte increment 875 Adaptive Shaping none pkts 14 bytes 2344 pkts delayed 0 bytes delayed 0 shaping inactive traffic shaping drops 0 Queueing strategy: priority-list 1 List Queue Args 1 medium default --More--   List Queue Args 1 high protocol ip tcp port telnet 1 low protocol ip tcp port www Output queue: high 0/20/0, medium 0/40/0, normal 0/60/0, low 0/80/0 R7#sh run int s 1/0.2 Building configuration... Current configuration : 182 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay class Prob6 frame-relay interface-dlci 702 end R7#sh run | b 1/0 interface Serial1/0 no ip address encapsulation frame-relay no fair-queue frame-relay traffic-shaping ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network broadcast ip ospf priority 0 frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay class Prob6 frame-relay interface-dlci 702 ! interface Serial1/1 no ip address shutdown ! --More--   R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0 R7(config-if)#no fram R7(config-if)#no frame-relay traff R7(config-if)#no frame-relay traffic-shaping R7(config-if)#int s 1/0.2 R7(config-subif)#no fram R7(config-subif)#no frame-relay clas` R7(config-subif)#no frame-relay clas`  R7(config-subif)#no frame-relay class Prob6 R7(config-subif)#fra R7(config-subif)#fram R7(config-subif)#frame-relay ? class Define a map class on the interface de-group Associate a DE group with a DLCI interface-dlci Define a DLCI on an interface/subinterface inverse-arp Enable/disable FR inverse ARP ip Frame Relay Internet Protocol config commands map Map a protocol address to a DLCI address payload-compression Use payload compression priority-dlci-group Define a priority group of DLCIs vc-bundle configure a frame-relay vc-bundle R7(config-subif)#frame-relay Pri R7(config-subif)#frame-relay Priority-dlci-group ? <1-16> Assign priority group R7(config-subif)#frame-relay Priority-dlci-group 1 ? <16-1007> DLCI for high priority R7(config-subif)#frame-relay Priority-dlci-group 1 702 ? <16-1007> DLCI for medium priority R7(config-subif)#frame-relay Priority-dlci-group 1 702 R7(config-subif)# *Mar 1 14:03:32.955: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from FULL to DOWN, Neighbor Down: Interface down or detached R7(config-subif)#do sh run int s 1/0.2 Building configuration... Current configuration : 208 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 end R7(config-subif)#end R7# *Mar 1 14:03:48.773: %SYS-5-CONFIG_I: Configured from console by console R7#deb prio R7#deb priority Priority output queueing debugging is on R7# R7# R7# R7#sh ip ospf nbe  ei Neighbor ID Pri State Dead Time Address Interface 180.40.7.129 1 FULL/DR 00:00:34 180.40.7.66 Serial1/0.1 180.40.7.129 1 FULL/BDR 00:00:29 180.40.7.129 FastEthernet0/1 180.40.7.130 1 FULL/DR 00:00:32 180.40.7.130 FastEthernet0/1 208.28.1.2 1 FULL/DR 00:00:30 208.28.1.2 FastEthernet0/0 R7# R7# R7# R7#sh fram pvcf    c 702 PVC Statistics for interface Serial1/0 (Frame Relay DTE) DLCI = 702, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.2 input pkts 2866 output pkts 2852 in bytes 476380 out bytes 474560 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 2529 out bcast bytes 441728 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 14:03:59, last time pvc status changed 14:03:59 Priority DLCI Group 1, DLCI 702 (HIGH), DLCI 702 (MEDIUM) DLCI 702 (NORMAL), DLCI 702 (LOW) R7# *Mar 1 14:04:30.434: PQ: Serial1/0: cdp -> normal *Mar 1 14:04:30.434: PQ: Serial1/0: cdp -> normal *Mar 1 14:04:30.434: PQ: Serial1/0: cdp -> normal *Mar 1 14:04:30.434: PQ: Serial1/0: cdp -> normal *Mar 1 14:04:30.434: PQ: Serial1/0: cdp -> normal *Mar 1 14:04:30.434: PQ: Serial1/0: cdp -> normal *Mar 1 14:04:30.438: PQ: Serial1/0: ip -> normal R7# *Mar 1 14:04:37.072: PQ: Serial1/0: cdp -> normal *Mar 1 14:04:37.072: PQ: Serial1/0: cdp -> normal R7# *Mar 1 14:04:56.548: PQ: Serial1/0: ip -> normal *Mar 1 14:04:56.661: PQ: Serial1/0: ip -> normal *Mar 1 14:04:56.761: PQ: Serial1/0: ip -> normal R7# *Mar 1 14:04:56.805: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from LOADING to FULL, Loading Done R7# *Mar 1 14:04:57.306: PQ: Serial1/0: ip -> normal *Mar 1 14:04:57.338: PQ: Serial1/0: ip -> normal R7#sh fram pvc 702ip ospf nei deb priority config t sh run | b 1/0int s 1/0.2 *Mar 1 14:05:00.439: PQ: Serial1/0: ip -> normal R7#sh run int s 1/0.2fram pvc 702 queueing int s 1/0.2fram pvc 180.40.7.162 Trying 180.40.7.162 ... Open R2# R2# *Mar 1 14:05:04.810: PQ: Serial1/0: ip -> normal *Mar 1 14:05:04.854: PQ: Serial1/0: ip -> normal *Mar 1 14:05:04.858: PQ: Serial1/0: ip -> normal *Mar 1 14:05:04.858: PQ: Serial1/0: ip -> normal *Mar 1 14:05:04.910: PQ: Serial1/0: ip -> normal *Mar 1 14:05:04.910: PQ: Serial1/0: ip -> normal *Mar 1 14:05:04.910: PQ: Serial1/0: ip -> normal *Mar 1 14:05:04.914: PQ: Serial1/0: ip -> normal *Mar 1 14:05:05.118: PQ: Serial1/0: ip -> normal R2# R2# *Mar 1 14:05:06.068: PQ: Serial1/0: ip -> normal *Mar 1 14:05:06.276: PQ: Serial1/0: ip -> normal *Mar 1 14:05:06.449: PQ: Serial1/0: ip -> normal *Mar 1 14:05:06.685: PQ: Serial1/0: ip -> normal R2# R2#q [Connection to 180.40.7.162 closed by foreign host] R7# R7# *Mar 1 14:05:16.361: PQ: Serial1/0: ip -> normal *Mar 1 14:05:16.565: PQ: Serial1/0: ip -> normal *Mar 1 14:05:16.806: PQ: Serial1/0: ip -> normal *Mar 1 14:05:16.978: PQ: Serial1/0: ip -> normal *Mar 1 14:05:17.158: PQ: Serial1/0: ip -> normal *Mar 1 14:05:17.338: PQ: Serial1/0: ip -> normal *Mar 1 14:05:17.342: PQ: Serial1/0: ip -> normal R7# *Mar 1 14:05:19.734: PQ: Serial1/0: ip -> normal R7#  config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0 R7(config-if)#pri R7(config-if)#priority-group *Mar 1 14:05:30.440: PQ: Serial1/0: ip -> normal R7(config-if)#priority-group 1 R7(config-if)#^Z R7# *Mar 1 14:05:34.807: %SYS-5-CONFIG_I: Configured from console by console R7#config t *Mar 1 14:05:37.075: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 1 14:05:37.075: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 1 14:05:37.107: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 1 14:05:37.107: PQ: Serial1/0 output (Pk size/Q 356/1) *Mar 1 14:05:37.107: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 1 14:05:37.151: PQ: Serial1/0 output (Pk size/Q 356/1) R7#config t  *Mar 1 14:05:40.420: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 14:05:40.512: PQ: Serial1/0 output (Pk size/Q 84/0) R7# *Mar 1 14:05:50.421: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 14:05:50.429: PQ: Serial1/0 output (Pk size/Q 84/0) R7#ping 180.40.7. *Mar 1 14:06:00.421: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 14:06:00.441: PQ: Serial1/0: ip (defaulting) -> medium *Mar 1 14:06:00.445: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 1 14:06:00.453: PQ: Serial1/0 output (Pk size/Q 84/0) R7#ping 180.40.7.66 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.66, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 60/60/60 ms R7# *Mar 1 14:06:04.500: PQ: Serial1/0: ip (defaulting) -> medium *Mar 1 14:06:04.500: PQ: Serial1/0 output (Pk size/Q 104/1) *Mar 1 14:06:04.560: PQ: Serial1/0: ip (defaulting) -> medium *Mar 1 14:06:04.560: PQ: Serial1/0 output (Pk size/Q 104/1) *Mar 1 14:06:04.620: PQ: Serial1/0: ip (defaulting) -> medium *Mar 1 14:06:04.620: PQ: Serial1/0 output (Pk size/Q 104/1) *Mar 1 14:06:04.680: PQ: Serial1/0: ip (defaulting) -> medium *Mar 1 14:06:04.680: PQ: Serial1/0 output (Pk size/Q 104/1) *Mar 1 14:06:04.740: PQ: Serial1/0: ip (defaulting) -> medium *Mar 1 14:06:04.740: PQ: Serial1/0 output (Pk size/Q 104/1) R7# *Mar 1 14:06:10.421: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 14:06:10.461: PQ: Serial1/0 output (Pk size/Q 84/0) R7# *Mar 1 14:06:20.422: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 14:06:20.478: PQ: Serial1/0 output (Pk size/Q 84/0) R7# *Mar 1 14:06:30.422: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 14:06:30.442: PQ: Serial1/0: ip (defaulting) -> medium *Mar 1 14:06:30.494: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 1 14:06:30.502: PQ: Serial1/0 output (Pk size/Q 84/0) R7# *Mar 1 14:06:37.077: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 1 14:06:37.077: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 1 14:06:37.105: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 1 14:06:37.105: PQ: Serial1/0 output (Pk size/Q 356/1) *Mar 1 14:06:37.105: PQ: Serial1/0: cdp (defaulting) -> medium *Mar 1 14:06:37.149: PQ: Serial1/0 output (Pk size/Q 356/1) R7#u all All possible debugging has been turned off R7#sh r *Mar 1 14:06:40.423: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 14:06:40.511: PQ: Serial1/0 output (Pk size/Q 84/0) R7#sh runint        uin  \ in   int s 1/0.2 Building configuration... Current configuration : 208 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 end R7# R7#sh run int s 1/0 Building configuration... Current configuration : 87 bytes ! interface Serial1/0 no ip address encapsulation frame-relay priority-group 1 end R7# R7# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3# R3# R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip nbar R3(config)#ip nbar por R3(config)#ip nbar port-map ftp ? tcp TCP ports R3(config)#ip nbar port-map ftp tcp ? <1-65535> Up to 16 port numbers separated by white-spaces R3(config)#ip nbar port-map ftp tcp 20 21 R3(config)#class R3(config)#class-map telnet R3(config-cmap)#match pro R3(config-cmap)#match protocol telnet R3(config-cmap)#c exit R3(config)#class R3(config)#class-map ftp R3(config-cmap)#match ft  pro ftp R3(config-cmap)#exit R3(config)#pol R3(config)#policy-map Pr rob7 R3(config-pmap)#class R3(config-pmap)#class telnet R3(config-pmap-c)#ban R3(config-pmap-c)#bandwidth p R3(config-pmap-c)#bandwidth percent ? <1-100> Percentage R3(config-pmap-c)#bandwidth percent 24 R3(config-pmap-c)#eixt ^ % Invalid input detected at '^' marker. R3(config-pmap-c)#exit R3(config-pmap)#class R3(config-pmap)#class ftp R3(config-pmap-c)#b R3(config-pmap-c)#bandwidth p R3(config-pmap-c)#bandwidth percent 51 R3(config-pmap-c)#edx  e xit R3(config-pmap)#class class-default R3(config-pmap-c)#ban R3(config-pmap-c)#bandwidth p R3(config-pmap-c)#bandwidth percent 25 R3(config-pmap-c)#int s 1/2 R3(config-if)#serv R3(config-if)#service-policy out R3(config-if)#service-policy output Prob7 I/f Serial1/2 class class-default requested bandwidth 25%, available only 0% R3(config-if)#ma R3(config-if)#max R3(config-if)#max-reserved-bandwidth 100   ? <1-100> Max. reservable bandwidth as % of interface bandwidth R3(config-if)#max-reserved-bandwidth 100 R3(config-if)#max-reserved-bandwidth 100service-policy output Prob7 R3(config-if)#^Z R3#sh run | *Mar 2 00:38:45.216: %SYS-5-CONFIG_I: Configured from console by console R3#sh run | b class class-map match-all dscp26 match dscp af31 class-map match-all dscp14 match dscp af13 class-map match-all telnet match protocol telnet class-map match-all dscp12 match dscp af12 class-map match-all dscp28 match dscp af32 class-map match-all prec3 match ip precedence 3 class-map match-all ftp match protocol ftp ! ! policy-map test class dscp12 class dscp14 class dscp26 class dscp28 class prec3 policy-map Prob7 --More--   class telnet bandwidth percent 24 class ftp bandwidth percent 51 class class-default bandwidth percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto service-policy input test ! interface BRI0/0 no ip address shutdown ! --More--  interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network broadcast frame-relay map ip 180.40.7.65 307 broadcast tcp header-compression connections 20 frame-relay map ip 180.40.7.67 302 broadcast ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 max-reserved-bandwidth 100 service-policy output Prob7 ! --More--   R3#sh   h run Building configuration... Current configuration : 2714 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! boot-start-marker boot-end-marker ! ! no network-clock-participate slot 1 no network-clock-participate wic 0 no aaa new-model ip subnet-zero ! ! ip nbar port-map ftp tcp 20 21 ! ip cef --More--   R3# R3# RACK18AS>6 [Resuming connection 6 to r6 ... ] 09: S6#sh mls qos QoS is disabled S6# S6# S6# S6# S6#sh mls qos config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#mls qos QoS: ensure flow-control on all interfaces are OFF for proper operation. S6(config)#end S6#sh m 1d00h: %SYS-5-CONFIG_I: Configured from console by console S6#sh mls qos QoS is enabled S6#sh mls qos int fa 0/7 FastEthernet0/7 trust state: not trusted trust mode: not trusted COS override: dis default COS: 0 DSCP Mutation Map: Default DSCP Mutation Map Trust device: none S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int s 1/    fa 0/7 S6(config-if)#mls qos ? cos Configure interface COS parameters dscp-mutation Apply DSCP-DSCP map to DSCP trusted port monitor Collect QoS statistics trust Configure trust state of interface S6(config-if)#mls qos tr ? cos Classify by packet COS device trusted device class dscp Classify by packet DSCP ip-precedence Classify by packet IP precedence S6(config-if)#mls qos tr ip S6(config-if)#mls qos tr ip-precedence S6(config-if)#^Z S6#sh 1d00h: %SYS-5-CONFIG_I: Configured from console by console S6#sh mls qos int fa 0/7 FastEthernet0/7 trust state: trust ip-precedence trust mode: trust ip-precedence COS override: dis default COS: 0 DSCP Mutation Map: Default DSCP Mutation Map Trust device: none S6#sh mls qos map S6#sh mls qos maps Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 Dscp-dscp mutation map: Default DSCP Mutation Map: --More--   S6#1 CON   config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#i mls ? aclmerge Modify behavior of ACL merge qos QoS parameters S6(config)#mls qos >? % Unrecognized command S6(config)#mls qos > ? aggregate-policer Assign aggregate policer cos Configure CoS setting map Define QoS mapping min-reserve Configure min-reserve buffers S6(config)#mls qos map ? cos-dscp Map COS to DSCP dscp-cos Map DSCP to COS dscp-mutation Configure dscp-mutation map dscp-switch-priority Map DSCP to switch priority ip-prec-dscp DSCP values for IP precedences 0-7 policed-dscp Map DSCP to policed DSCP S6(config)#mls qos map ip S6(config)#mls qos map ip-prec-dscp ? <0-63> 8 dscp values separated by spaces S6(config)#mls qos map ip-prec-dscp 0 14 16 28 32 49 0 48 56 S6(config)#^Z S6# 1d01h: %SYS-5-CONFIG_I: Configured from console by console S6# RACK18AS>5 [Resuming connection 5 to r5 ... ] S5#ping 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh run | b class  sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   --More--   Class-map: prec3 (match-all) --More--   5 packets, 570 bytes --More--   5 minute offered rate 0 bps --More--   Match: ip precedence 3 --More--   --More--   Class-map: class-default (match-any) --More--   829 packets, 79121 bytes --More--   5 minute offered rate 0 bps, drop rate 0 bps --More--   Match: any R3#sh mls qos map ^ % Invalid input detected at '^' marker. R3#sh mls qos map  RACK18AS>6 [Resuming connection 6 to r6 ... ] S6#config t sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 14 16 28 32 40 48 56 Dscp-dscp mutation map: Default DSCP Mutation Map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 S6# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/1 0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   R3#sh class R3#sh class-map Class Map match-all dscp26 (id 3) Match dscp af31 (26) Class Map match-all dscp14 (id 2) Match dscp af13 (14) Class Map match-all telnet (id 6) Match protocol telnet Class Map match-all dscp12 (id 1) Match dscp af12 (12) Class Map match-all dscp28 (id 4) Match dscp af32 (28) Class Map match-any class-default (id 0) Match any Class Map match-all prec3 (id 5) Match ip precedence 3 Class Map match-all ftp (id 7) Match protocol ftp --More--   R3# RACK18AS>6 [Resuming connection 6 to r6 ... ] S6# S6# S6#sh ru |    n | b mls qos mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 no switchport ip address 20.10.2.1 255.255.255.0 ! interface FastEthernet0/2 --More--   S6#ah  sh run | int fa 0/7 Building configuration... Current configuration : 124 bytes ! interface FastEthernet0/7 switchport access vlan 10 switchport mode dynamic desirable mls qos trust ip-precedence end S6# S6#co   RACK18AS>5 [Resuming connection 5 to r5 ... ] S5#confi gt ^ % Invalid input detected at '^' marker. S5#conif  fig t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#mls     mls qos QoS: ensure flow-control on all interfaces are OFF for proper operation. S5(config)#int fa 0/24 S5(config-if)#mls qos tr  tru S5(config-if)#mls qos trust dsc S5(config-if)#mls qos trust dscp ? pass-through dscp pass-through mode S5(config-if)#mls qos trust dscp S5(config-if)#exit S5(config)#mls qos ? aggregate-policer Assign aggregate policer cos Configure CoS setting map Define QoS mapping min-reserve Configure min-reserve buffers S5(config)#mls qos mp ? % Unrecognized command S5(config)#mls qos mp   ap ? cos-dscp Map COS to DSCP dscp-cos Map DSCP to COS dscp-mutation Configure dscp-mutation map dscp-switch-priority Map DSCP to switch priority ip-prec-dscp DSCP values for IP precedences 0-7 policed-dscp Map DSCP to policed DSCP S5(config)#mls qos map dsc S5(config)#mls qos map dscp-m S5(config)#mls qos map dscp-mutation ? WORD DSCP mutation map name S5(config)#mls qos map dscp-mutation ? WORD DSCP mutation map name S5(config)#mls qos map dscp-mutation Prob 9 b9 ? <0-63> DSCP values separated by spaces (up to 8 values total) S5(config)#mls qos map dscp-mutation Prob9 28 ? <0-63> DSCP values separated by spaces (up to 8 values total) to Specify egress DSCPs S5(config)#mls qos map dscp-mutation Prob9 28 to ? <0-63> dscp value S5(config)#mls qos map dscp-mutation Prob9 28 to 26 S5(config)#mls qos map dscp-mutation Prob9 28 to 26        14 to 12 S5(config)#int fa 0/24 S5(config-if)#mls qos ? cos Configure interface COS parameters dscp-mutation Apply DSCP-DSCP map to DSCP trusted port monitor Collect QoS statistics trust Configure trust state of interface S5(config-if)#mls qos dsc S5(config-if)#mls qos dscp-mutation ? WORD dscp-mutation name S5(config-if)#mls qos dscp-mutation Prob9 ? S5(config-if)#mls qos dscp-mutation Prob9 S5(config-if)#^Z S5# 1d01h: %SYS-5-CONFIG_I: Configured from console by console S5#config t gtping 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol in fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   --More--   Class-map: prec3 (match-all) --More--   5 packets, 570 bytes --More--   5 minute offered rate 0 bps --More--   Match: ip precedence 3 --More--   --More--   Class-map: class-default (match-any) --More--   R3# RACK18AS>5 [Resuming connection 5 to r5 ... ] S5#sh run | b mls mls qos map dscp-mutation Prob9 14 to 12 mls qos map dscp-mutation Prob9 28 to 26 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 switchport mode dynamic desirable ! interface FastEthernet0/2 --More--   S5#sh run int s fa0/24 Building configuration... Current configuration : 144 bytes ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk mls qos trust dscp mls qos dscp-mutation Prob9 end S5# S5#sh mls qos int fa 0/0 ^ % Invalid input detected at '^' marker. S5#sh mls qos int fa 0/0 1 FastEthernet0/1 trust state: not trusted trust mode: not trusted COS override: dis default COS: 0 DSCP Mutation Map: Default DSCP Mutation Map Trust device: none S5#sh mls qos int fa 0/1 ? buffers Show buffer information policers Show policers information queueing Show queueing information statistics Show statistics | Output modifiers S5#sh mls qos int fa 0/1 qu FastEthernet0/1 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 Cos-queue map: cos-qid 0 - 1 1 - 1 2 - 2 3 - 2 4 - 3 5 - 3 6 - 4 7 - 4 S5# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh ver Cisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.3(16a), RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by cisco Systems, Inc. Compiled Wed 09-Nov-05 19:23 by evmiller Image text-base: 0x80008098, data-base: 0x8202B100 ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1) ROM: C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.3(16a), RELEASE SOFTWARE (fc2) R3 uptime is 1 day, 3 hours, 32 minutes System returned to ROM by power-on System image file is "flash:c2600-adventerprisek9-mz.123-16a.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you --More--  agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco 2611XM (MPC860P) processor (revision 0x401) with 126976K/4096K bytes of memory. Processor board ID FTX0918A2M8 (3639597088) M860 processor: part number 5, mask 2 X.25 software, Version 3.0.0. SuperLAT software (copyright 1990 by Meridian Technology Corp). Bridging software. TN3270 Emulation software. Basic Rate ISDN software, Version 1.1. 2 FastEthernet/IEEE 802.3 interface(s) 8 Low-speed serial(sync/async) network interface(s) 1 ISDN Basic Rate interface(s) 32K bytes of non-volatile configuration memory. 49152K bytes of processor board System flash (Read/Write) --More--   Configuration register is 0x2141 (will be 0x2102 at next reload) R3# RACK18AS>7 [Resuming connection 7 to r7 ... ] R7#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 208.28.1.1 YES NVRAM up up BRI0/0 unassigned YES NVRAM administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 180.40.7.131 YES NVRAM up up Serial1/0 unassigned YES NVRAM up up Serial1/0.1 180.40.7.65 YES NVRAM up up Serial1/0.2 180.40.7.161 YES NVRAM up up Serial1/1 unassigned YES NVRAM administratively down down Serial1/2 unassigned YES NVRAM administratively down down Serial1/3 unassigned YES NVRAM administratively down down --More--   R7# RACK18AS>6 [Resuming connection 6 to r6 ... ] S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 0./  /4 S6(config-if)#mls qos ? cos Configure interface COS parameters dscp-mutation Apply DSCP-DSCP map to DSCP trusted port monitor Collect QoS statistics trust Configure trust state of interface S6(config-if)#mls qos co S6(config-if)#mls qos cos ? <0-7> Class of service value between 0 and 7 override Force default COS on all packets S6(config-if)#mls qos cos 4 S6(config-if)#int   ^Z S6# 1d04h: %SYS-5-CONFIG_I: Configured from console by console S6# RACK18AS>5 [Resuming connection 5 to r5 ... ] S5#sh run int fa 0/24 Building configuration... Current configuration : 144 bytes ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk mls qos trust dscp mls qos dscp-mutation Prob9 end S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int fa 0/24 S5(config-if)#mls qos c tr S5(config-if)#mls qos trust co S5(config-if)#mls qos trust cos ? pass-through cos pass-through mode S5(config-if)#mls qos trust cos pa S5(config-if)#mls qos trust cos pass-through ? dscp transmit without dscp modification S5(config-if)#mls qos trust cos pass-through dc S5(config-if)#mls qos trust cos pass-through dc sc S5(config-if)#mls qos trust cos pass-through dscp ? S5(config-if)#mls qos trust cos pass-through dscp S5(config-if)#^Z S5#config t 1d04h: %SYS-5-CONFIG_I: Configured from console by console S5#config t  RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   R3# RACK18AS>5 [Resuming connection 5 to r5 ... ] S5#config tsh run int fa 0/24config t  pin 178  80.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 10 packets, 1140 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   R3# RACK18AS>5 [Resuming connection 5 to r5 ... ] S5#sh mls qwo  os int fa 0/3 ? buffers Show buffer information policers Show policers information queueing Show queueing information statistics Show statistics | Output modifiers S5#sh mls qos int fa 0/3 qu S5#sh mls qos int fa 0/3 queueing FastEthernet0/3 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 Cos-queue map: cos-qid 0 - 1 1 - 1 2 - 2 3 - 2 4 - 3 5 - 3 6 - 4 7 - 4 S5#sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)# S5(config)#mls qls mpo a  ap s map os map s map Dscp-cos ? <0-63> DSCP values separated by spaces (up to 8 values total) S5(config)#mls qos map Dscp-cos 8 9 10 11 13 14 15 ? <0-63> DSCP values separated by spaces (up to 8 values total) to Specify COS S5(config)#mls qos map Dscp-cos 8 9 10 11 13 14 15 to ? <0-7> cos value S5(config)#mls qos map Dscp-cos 8 9 10 11 13 14 15 to 0 S5(config)#mls qos map dsc S5(config)#mls qos map dscp-c S5(config)#mls qos map dscp-cos 24 25 27 28 29 30 31 to 5 S5(config)#mls qos map dscp-cos 24 25 27 28 29 30 31 to 5 2 S5(config)#do sh mls map s qmap omap smap  map map dsc S5(config)#do sh mls qos map dsc  scp-co Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 01 00 00 00 02 02 02 02 2 : 02 02 02 02 02 02 03 02 02 02 3 : 02 02 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 S5(config)#mls qos map ds S5(config)#mls qos map dscp-c S5(config)#mls qos map dscp-cos 32 33 34 35 36 36 7 38 39 to 5 S5(config)#mls qos map dscp-cos 32 33 34 35 36 37 38 39 to 5do sh mls qos map dscp-co  Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 01 00 00 00 02 02 02 02 2 : 02 02 02 02 02 02 03 02 02 02 3 : 02 02 05 05 05 05 05 05 05 05 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 S5(config)#int fa 0/3 S5(config-if)#wr S5(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id min-reserve Configure min-reserve level S5(config-if)#wrr-queue co S5(config-if)#wrr-queue cos-map ? <1-4> enter cos-map queue id S5(config-if)#wrr-queue cos-map 2 0 5 6 7 S5(config-if)#wrr-queue cos-map 2 0 5 6 7         3 3 S5(config-if)#wrr-queue cos-map 3 3   4 4 S5(config-if)#do sh mls qos int fa 0/3 que FastEthernet0/3 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 Cos-queue map: cos-qid 0 - 2 1 - 1 2 - 2 3 - 3 4 - 4 5 - 2 6 - 2 7 - 2 S5(config-if)#do sh mls qos int fa 0/3 que wr S5(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id min-reserve Configure min-reserve level S5(config-if)#wrr-queue b S5(config-if)#wrr-queue bandwidth ? <1-65536> enter bandwidth weight for qid 1 S5(config-if)#wrr-queue bandwidth 30 40 30 1 ? <1-65536> enter bandwidth weight for qid 4 S5(config-if)#wrr-queue bandwidth 30 40 30 1 S5(config-if)#pri S5(config-if)#priority-queue ou S5(config-if)#priority-queue out ? S5(config-if)#priority-queue out S5(config-if)# S5(config-if)# S5(config-if)# S5(config-if)#end S5# 1d04h: %SYS-5-CONFIG_I: Configured from console by console S5# S5# S5#sh runint      i int fa 0/3 Building configuration... Current configuration : 247 bytes ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable wrr-queue bandwidth 30 40 30 1 wrr-queue cos-map 1 1 wrr-queue cos-map 2 0 2 5 6 7 wrr-queue cos-map 3 3 wrr-queue cos-map 4 4 priority-queue out end S5#sh mls qos map S5#sh mls qos maps Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 01 00 00 00 02 02 02 02 2 : 02 02 02 02 02 02 03 02 02 02 3 : 02 02 05 05 05 05 05 05 05 05 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 Dscp-dscp mutation map: Prob9: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 12 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 26 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-dscp mutation map: Default DSCP Mutation Map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 S5#sh mls qos maps   mls qos maps run int fa 0/3mls qos maps run int fa 0/3config t sh mls qos mapint fa 0/3 queueing FastEthernet0/3 Egress expedite queue: ena wrr bandwidth weights: qid-weights 1 - 30 2 - 40 3 - 30 4 - 1 when expedite queue is disabled Cos-queue map: cos-qid 0 - 2 1 - 1 2 - 2 3 - 3 4 - 4 5 - 2 6 - 2 7 - 2 S5#sh run | b mls mls qos map dscp-mutation Prob9 14 to 12 mls qos map dscp-mutation Prob9 28 to 26 mls qos map dscp-cos 8 9 10 11 13 14 15 to 0 mls qos map dscp-cos 24 25 27 28 29 30 31 to 2 mls qos map dscp-cos 32 33 34 35 36 37 38 39 to 5 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 --More--   switchport mode dynamic desirable ! interface FastEthernet0/2 switchport mode dynamic desirable ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable wrr-queue bandwidth 30 40 30 1 wrr-queue cos-map 1 1 wrr-queue cos-map 2 0 2 5 6 7 wrr-queue cos-map 3 3 wrr-queue cos-map 4 4 priority-queue out ! interface FastEthernet0/4 switchport mode dynamic desirable ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport mode dynamic desirable --More--   S5#SH RUN        sh run int fa 0/24 Building configuration... Current configuration : 161 bytes ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk mls qos trust cos pass-through dscp mls qos dscp-mutation Prob9 end S5# S5# RACK18AS>6 [Resuming connection 6 to r6 ... ] S6#sh run int fa 0/4 Building configuration... Current configuration : 110 bytes ! interface FastEthernet0/4 switchport access vlan 10 switchport mode dynamic desirable mls qos cos 4 end S6# S6# S6# S6# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#do    sh class R3#sh class-map Class Map match-all dscp26 (id 3) Match dscp af31 (26) Class Map match-all dscp14 (id 2) Match dscp af13 (14) Class Map match-all telnet (id 6) Match protocol telnet Class Map match-all dscp12 (id 1) Match dscp af12 (12) Class Map match-all dscp28 (id 4) Match dscp af32 (28) Class Map match-any class-default (id 0) Match any Class Map match-all prec3 (id 5) Match ip precedence 3 Class Map match-all ftp (id 7) Match protocol ftp --More--   R3#p cpm   config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#op  poo l R3(config)#policy-map Prob11 ? R3(config)#policy-map Prob11 R3(config-pmap)#class R3(config-pmap)#class dscp12 R3(config-pmap-c)#pri R3(config-pmap-c)#priority ? <8-2000000> Kilo Bits per second percent % of total bandwidth R3(config-pmap-c)#priority per R3(config-pmap-c)#priority percent ? <1-100> percentage R3(config-pmap-c)#priority percent 25 R3(config-pmap-c)#priority percent 25 ? <32-2000000> Burst in bytes R3(config-pmap-c)#priority percent 25   R3(config-pmap-c)#do sh run | pol sh run | pol ^ % Invalid input detected at '^' marker. R3(config-pmap-c)#do sh run | polbpol pol policy-map test class dscp12 class dscp14 class dscp26 class dscp28 class prec3 policy-map Prob7 class telnet bandwidth percent 24 class ftp bandwidth percent 51 class class-default bandwidth percent 25 policy-map Prob11 class dscp12 priority percent 25 ! ! ! ! ! ! interface FastEthernet0/0 --More--   R3(config-pmap-c)#int fa    s 1/2 R3(config-if)#no serv R3(config-if)#no service-policy out Porb7 % policy map Porb7 not configured R3(config-if)#no service-policy out Porb7    rob7 R3(config-if)#no policy-map Prob7 R3(config)#Policy-map Prob711 R3(config-pmap)# class dscp12 R3(config-pmap-c)# priority percent 25 R3(config-pmap-c)# class telnet R3(config-pmap-c)# bandwidth percent re 24 ^ % Invalid input detected at '^' marker. R3(config-pmap-c)# class ftp R3(config-pmap-c)# bandwidth percent re 51 ^ % Invalid input detected at '^' marker. R3(config-pmap-c)# class class-default R3(config-pmap-c)# bandwidth percent re 25 ^ % Invalid input detected at '^' marker. R3(config-pmap-c)#no policy-map Prob11 R3(config)#pol R3(config)#policy-map Prob711 R3(config-pmap)#class tel R3(config-pmap)#class telnet R3(config-pmap-c)#ban R3(config-pmap-c)#bandwidth re R3(config-pmap-c)#bandwidth remaining p R3(config-pmap-c)#bandwidth remaining percent 24 R3(config-pmap-c)# class ftp R3(config-pmap-c)# bandwidth re percent 51 R3(config-pmap-c)# class class-default R3(config-pmap-c)# bandwidth re percent 25 R3(config-pmap-c)#^Z R3#co *Mar 2 05:04:22.097: %SYS-5-CONFIG_I: Configured from console by console R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)# R3(config)#int s 1/2 R3(config-if)#ser R3(config-if)#ser rvi R3(config-if)#service-policy ou R3(config-if)#service-policy output Prob711 R3(config-if)#^Z R3# *Mar 2 05:04:38.227: %SYS-5-CONFIG_I: Configured from console by console R3# R3# R3# R3#sh pol Policy Map test Class dscp12 Class dscp14 Class dscp26 Class dscp28 Class prec3 Policy Map Prob711 Class dscp12 Strict Priority Bandwidth 25 (%) Class telnet Bandwidth remaining 24 (%) Max Threshold 64 (packets) Class ftp Bandwidth remaining 51 (%) Max Threshold 64 (packets) Class class-default Bandwidth remaining 25 (%) Max Threshold 64 (packets) R3#sh u run int s 1/2 Building configuration... Current configuration : 125 bytes ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 max-reserved-bandwidth 100 service-policy output Prob711 end R3#sh pol int s 1/2 Serial1/2 Service-policy output: Prob711 Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: dscp af12 (12) Queueing Strict Priority Output Queue: Conversation 40 Bandwidth 25 (%) Bandwidth 32 (kbps) Burst 800 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Queueing Output Queue: Conversation 41 Bandwidth remaining 24 (%) Max Threshold 64 (packets) --More--   (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp Queueing Output Queue: Conversation 42 Bandwidth remaining 51 (%) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: class-default (match-any) 27 packets, 2088 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Output Queue: Conversation 43 Bandwidth remaining 25 (%) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 R3#sh int s 1/2 qu R3#sh int s 1/2 qu        que R3#sh int queuein R3#sh int queuein              sh run | b class class-map match-all dscp26 match dscp af31 class-map match-all dscp14 match dscp af13 class-map match-all telnet match protocol telnet class-map match-all dscp12 match dscp af12 class-map match-all dscp28 match dscp af32 class-map match-all prec3 match ip precedence 3 class-map match-all ftp match protocol ftp ! ! policy-map test class dscp12 class dscp14 class dscp26 class dscp28 class prec3 policy-map Prob711 --More--   class dscp12 priority percent 25 class telnet bandwidth remaining percent 24 class ftp bandwidth remaining percent 51 class class-default bandwidth remaining percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto service-policy input test ! interface BRI0/0 no ip address --More--   shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network broadcast frame-relay map ip 180.40.7.65 307 broadcast tcp header-compression connections 20 frame-relay map ip 180.40.7.67 302 broadcast ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 max-reserved-bandwidth 100 --More--   service-policy output Prob711 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 --More--   R3# RACK18AS>7 [Resuming connection 7 to r7 ... ] R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/1 R7(config-if)#st R7(config-if)#standby ? <0-255> group number authentication Authentication delay HSRP initialisation delay ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level redirects Configure sending of ICMP Redirect messages with an HSRP virtual IP address as the gateway IP address timers Hello and hold timers track Priority tracking use-bia HSRP uses interface's burned in address R7(config-if)#standby 43   7 ? authentication Authentication ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level timers Hello and hold timers track Priority tracking R7(config-if)#standby 47 ip ? A.B.C.D Virtual IP address R7(config-if)#standby 47 ip 180.40.7.132 ? secondary Make this IP address a secondary virtual IP address R7(config-if)#standby 47 ip 180.40.7.132 R7(config-if)#do sh a *Mar 1 19:00:40.992: %HSRP-6-STATECHANGE: FastEthernet0/1 Grp 47 state Standby -> Active R7(config-if)#do sh arp Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.131 - 0013.6030.5fa1 ARPA FastEthernet0/1 Internet 180.40.7.130 183 0005.5e7b.c300 ARPA FastEthernet0/1 Internet 180.40.7.129 182 0013.6030.5fc0 ARPA FastEthernet0/1 Internet 180.40.7.132 - 0000.0c07.ac2f ARPA FastEthernet0/1 Internet 208.28.1.1 - 0013.6030.5fa0 ARPA FastEthernet0/0 Internet 208.28.1.2 183 0013.80e1.fe00 ARPA FastEthernet0/0 R7(config-if)#do sh arpstandby 47 ip 180.40.7.132 do sh arp          st R7(config-if)#standby ? <0-255> group number authentication Authentication delay HSRP initialisation delay ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level redirects Configure sending of ICMP Redirect messages with an HSRP virtual IP address as the gateway IP address timers Hello and hold timers track Priority tracking use-bia HSRP uses interface's burned in address R7(config-if)#standby ? <0-255> group number authentication Authentication delay HSRP initialisation delay ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level redirects Configure sending of ICMP Redirect messages with an HSRP virtual IP address as the gateway IP address timers Hello and hold timers track Priority tracking use-bia HSRP uses interface's burned in address R7(config-if)#standby pr R7(config-if)#standby pre R7(config-if)#standby preempt y 4preempt 7preempt  preempt  R7(config-if)#^Z R7# *Mar 1 19:02:21.481: %SYS-5-CONFIG_I: Configured from console by console R7# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#confi g   t Enter configuration commands, one per line. End with CNTL/Z. R3(config)# R3(config)#int fa 0/0 R3(config-if)#set R3(config-if)#set  tan R3(config-if)#standby 47 ip 180.40.7.132 R3(config-if)#se tan R3(config-if)#standby 47 pri R3(config-if)#standby 47 priority 101 R3(config-if)#stn R3(config-if)#stn an R3(config-if)#standby 47 pre R3(config-if)#standby 47 preempt R3(config-if)#stan R3(config-if)#standby *Mar 2 05:23:28.749: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active R3(config-if)#standby 47 tr R3(config-if)#standby 47 track ? <1-500> Tracked object number Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-TokenRing Virtual TokenRing R3(config-if)#standby 47 track ser 1/0 R3(config-if)#standby 47 track ser 1/0 2 R3(config-if)#^Z R3#sh *Mar 2 05:24:49.024: %SYS-5-CONFIG_I: Configured from console by console R3#sh stand R3#sh standby FastEthernet0/0 - Group 47 State is Active 2 state changes, last state change 00:01:24 Virtual IP address is 180.40.7.132 Active virtual MAC address is 0000.0c07.ac2f Local virtual MAC address is 0000.0c07.ac2f (default) Hello time 3 sec, hold time 10 sec Next hello sent in 2.371 secs Preemption enabled Active router is local Standby router is 180.40.7.131, priority 100 (expires in 7.364 sec) Priority 101 (configured 101) Track interface Serial1/0 state Up decrement 10 Track interface Serial1/2 state Up decrement 10 IP redundancy name is "hsrp-Fa0/0-47" (default) R3# RACK18AS>2 [Resuming connection 2 to r2 ... ] *Mar 2 00 R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/2 R2(config-if)#shut R2(config-if)# *Mar 2 05:25:36.438: %OSPF-5-AD RACK18AS>3 [Resuming connection 3 to r3 ... ] R3# *Mar 2 05:25:39.827: %LINK-3-UPDOWN: Interface Serial1/2, changed state to down R3# *Mar 2 05:25:39.827: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/2 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 05:25:40.797: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Speak R3# *Mar 2 05:25:40.829: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to down R3#sh stan R3#sh standby bri R3#sh standby brief P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/0 47 91 P Standby 180.40.7.131 local 180.40.7.132 R3# RACK18AS>2 [Resuming connection 2 to r2 ... ] JCHG: Process 1, Nbr 1 R2(config-if)#no shut R2(config-if)#^Z R2# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3# *Mar 2 05:26:34.793: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up *Mar 2 05:26:35.795: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up R3# *Mar 2 05:26:37.818: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active R3# *Mar 2 05:26:44.922: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/2 from LOADING to FULL, Loading Done R3#confi gt ^ % Invalid input detected at '^' marker. R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s   fa 0/0 R3(config-if)#stan R3(config-if)#standby 47 ? authentication Authentication ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level timers Hello and hold timers track Priority tracking R3(config-if)#standby 47 pre R3(config-if)#standby 47 preempt ? delay Wait before preempting R3(config-if)#standby 47 preempt de R3(config-if)#standby 47 preempt delay ? minimum Delay at least this long reload Delay after reload sync Wait for IP redundancy clients R3(config-if)#standby 47 preempt delay mi R3(config-if)#standby 47 preempt delay minimum ? <0-3600> Number of seconds for minimum delay R3(config-if)#standby 47 preempt delay minimum 10                                   ^Z R3# *Mar 2 05:28:21.520: %SYS-5-CONFIG_I: Configured from console by console R3#sh run int s   fa 0/0 Building configuration... Current configuration : 282 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto standby 47 ip 180.40.7.132 standby 47 priority 101 standby 47 preempt standby 47 track Serial1/0 standby 47 track Serial1/2 service-policy input test end R3# RACK18AS>7 [Resuming connection 7 to r7 ... ] *M R7#sh int fa 0/1rint fa 0/1oint fa 0/1uint fa 0/1int fa 0/1 int fa 0/1 uint fa 0/1 int fa 0/1int fa 0/1 nint fa 0/1 int fa 0/1 Building configuration... Current configuration : 176 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 speed auto half-duplex standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7# R7# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)# R3(config)#tr R3(config)#tra R3(config)#track R3(config)#track ? <1-500> Tracked object resolution Tracking resolution parameters timer Polling interval timers R3(config)#track 1 ? interface Select an interface to track ip IP protocol R3(config)#track 1 ip ? route IP route R3(config)#track 1 ip route ? A.B.C.D {/nn || A.B.C.D} Prefix and mask R3(config)#track 1 ip route 20.10.2/25 4 ? % Unrecognized command R3(config)#track 1 ip route 20.10.2/24 ./24 0/24 /24 ? metric Route metric reachability Route reachability state R3(config)#track 1 ip route 20.10.2.0/24 met ? threshold Route metric threshold R3(config)#track 1 ip route 20.10.2.0/24 met thr R3(config)#track 1 ip route 20.10.2.0/24 met threshold ? R3(config)#track 1 ip route 20.10.2.0/24 met threshold           re R3(config)#track 1 ip route 20.10.2.0/24 met rea R3(config)#track 1 ip route 20.10.2.0/24 met rea       rea R3(config)#track 1 ip route 20.10.2.0/24 reachability ? R3(config)#track 1 ip route 20.10.2.0/24 reachability % Cannot change object created via HSRP R3(config)# R3(config)# R3(config)# R3(config)#track 1 ip route 20.10.2.0/24 reachability  ip route 20.10.2.0/24 reachability 2 ip route 20.10.2.0/24 reachability  % Cannot change object created via HSRP R3(config)# R3(config)# R3(config)# R3(config)#track 2 ip route 20.10.2.0/24 reachability  ip route 20.10.2.0/24 reachability 3 ip route 20.10.2.0/24 reachability  R3(config-track)#int fa 0/0 R3(config-if)#stan R3(config-if)#standby 47 tr R3(config-if)#standby 47 track ? <1-500> Tracked object number Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-TokenRing Virtual TokenRing R3(config-if)#standby 47 track 3 ? decrement Priority decrement R3(config-if)#standby 47 track 3 de R3(config-if)#standby 47 track 3 decrement 75 R3(config-if)#^Z R3# *Mar 2 05:33:32.194: %SYS-5-CONFIG_I: Configured from console by console R3# RACK18AS>6 [Resuming connection 6 to r6 ... ] S6#confi gt ^ % Invalid input detected at '^' marker. S6#iun   config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 01 ;1  /1 S6(config-if)#shut S6(config-if)# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh stand brie P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/0 47 101 P Active local 180.40.7.131 180.40.7.132 R3# *Mar 2 05:34:02.059: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Speak R3# R3#sh stand brie P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/0 47 26 P Speak 180.40.7.131 unknown 180.40.7.132 R3# RACK18AS>6\ % Unknown command or computer name, or unable to find computer address RACK18AS>6 [Resuming connection 6 to r6 ... ] 1d S6(config-if)#no shut S6(config-if)#^Z S6# 1d05h: %SYS-5-CONFIG_I: Configured from console by console S6# 1d05h: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to down S6# 1d05h: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up 1d05h: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up S6# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip sl R3(config)#ip sl? % Unrecognized command R3(config)#ip sl     co  int fa 0         *Mar 2 05:35:02.081: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active R3(config)#rt? rtr rtsp R3(config)#rtR ? <1-2147483647> Entry Number key-chain Use MD5 authentication for RTR control message low-memory Configure low water memory mark reaction-configuration RTR Reaction Configuration reaction-trigger RTR trigger assignment reset RTR Reset responder Enable RTR Responder restart Restart an active entry schedule RTR Entry Scheduling slm Service Level Management R3(config)#rtR 1 ? R3(config)#rtR 1     1 R3(config-rtr)#? SAA entry configuration commands: exit Exit operation configuration type Type of entry R3(config-rtr)#typ ? dhcp DHCP Operation dlsw DLSW Operation dns DNS Query Operation echo Echo Operation frame-relay Perform frame relay operation ftp FTP Operation http HTTP Operation jitter Jitter Operation pathEcho Path Discovered Echo Operation pathJitter Path Discovered Jitter Operation slm SLM Operation tcpConnect TCP Connect Operation udpEcho UDP Echo Operation R3(config-rtr)#typ     exit R3(config)#exitrtR 1nrtR 1ortR 1 rtR 1 Operation not found R3(config)#end R3#sh ru *Mar 2 05:35:49.527: %SYS-5-CONFIG_I: Configured from console by console R3#sh run | b track track 3 ip route 20.10.2.0 255.255.255.0 reachability ! ! ! class-map match-all dscp26 match dscp af31 class-map match-all dscp14 match dscp af13 class-map match-all telnet match protocol telnet class-map match-all dscp12 match dscp af12 class-map match-all dscp28 match dscp af32 class-map match-all prec3 match ip precedence 3 class-map match-all ftp match protocol ftp ! ! policy-map test class dscp12 class dscp14 --More--   class dscp26 class dscp28 class prec3 policy-map Prob711 class dscp12 priority percent 25 class telnet bandwidth remaining percent 24 class ftp bandwidth remaining percent 51 class class-default bandwidth remaining percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto --More--   standby 47 ip 180.40.7.132 standby 47 priority 101 standby 47 preempt standby 47 track Serial1/0 standby 47 track Serial1/2 standby 47 track 3 decrement 75 service-policy input test ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network broadcast frame-relay map ip 180.40.7.65 307 broadcast tcp header-compression connections 20 --More--   R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)# R3(config)#int fa 0/0 R3(config-if)#vr R3(config-if)#vrrp ? <1-255> Group number R3(config-if)#vrrp 47 ? authentication Authentication string description Group specific description ip Enable Virtual Router Redundancy Protocol (VRRP) for IP preempt Enable preemption of lower priority Master priority Priority of this VRRP group timers Set the VRRP timers R3(config-if)#vrrp 47 ip ? A.B.C.D VRRP group IP address R3(config-if)#vrrp 47 ip 180.40.7.133 ? secondary Specify an additional VRRP address for this group R3(config-if)#vrrp 47 ip 180.40.7.133 R3(config-if)# *Mar 2 05:37:45.213: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup R3(config-if)# *Mar 2 05:37:48.822: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Master R3(config-if)#do sh vrrg po  p FastEthernet0/0 - Group 47 State is Master Virtual IP address is 180.40.7.133 Virtual MAC address is 0000.5e00.012f Advertisement interval is 1.000 sec Preemption enabled Priority is 100 Master Router is 180.40.7.129 (local), priority is 100 Master Advertisement interval is 1.000 sec Master Down interval is 3.609 sec R3(config-if)#vrrp 47 pri R3(config-if)#vrrp 47 priority 111 R3(config-if)#^Z R3# *Mar 2 05:39:26.735: %SYS-5-CONFIG_I: Configured fr RACK18AS>7 [Resuming connection 7 to r7 ... ] * R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)# R7(config)#int fa 0/1 R7(config-if)#vrr R7(config-if)#vrrp 47 ip 180.40.7.133 R7(config-if)# *Mar 1 19:22:13.223: %VRRP-6-STATECHANGE: Fa0/1 Grp 47 state Init -> Backup R7(config-if)#^Z R7# *Mar 1 19:22:16.740: %SYS-5-CONFIG_I: Configured from console by console R7#sh ip    st R7#sh stan R7#sh standby br R7#sh standby brief P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/1 47 100 P Standby 180.40.7.129 local 180.40.7.132 R7#sh vrr brie Interface Grp Pri Time Own Pre State Master addr Group addr Fa0/1 47 100 3609 Y Backup 180.40.7.129 180.40.7.133 R7# RACK18AS>4 [Resuming connection 4 to r4 ... ] *Ma R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#no ip loca R4(config)#no ip local po R4(config)#no ip local pol R4(config)#no ip local policy rou R4(config)#no ip local policy route-map Prob2 R4(config)#^Z R4#ping *Mar 2 05:45:23.668: %SYS-5-CONFIG_I: Configured from console by console R4#ping 180.40.7.132 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.132, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 4/4/4 ms R4#ping 180.40.7.132 3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.133, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 1/1/4 ms R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] console by console R3# R3#sh run        config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#vrrp 47 ? authentication Authentication string description Group specific description ip Enable Virtual Router Redundancy Protocol (VRRP) for IP preempt Enable preemption of lower priority Master priority Priority of this VRRP group timers Set the VRRP timers R3(config-if)#vrrp 47         ^Z R3#sh run int *Mar 2 05:44:31.871: %SYS-5-CONFIG_I: Configured from console by console R3#sh run int fa 0/0 Building configuration... Current configuration : 362 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto vrrp 47 ip 180.40.7.133 vrrp 47 priority 111 standby 47 ip 180.40.7.132 standby 47 priority 101 standby 47 preempt standby 47 track Serial1/0 standby 47 track Serial1/2 standby 47 track 3 decrement 75 service-policy input test end R3#^x7 % Unknown command or computer name, or unable to find computer address R3# R3# RACK18AS>7 [Resuming connection 7 to r7 ... ] R7#sh run int fs   a 0/1 Building configuration... Current configuration : 201 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 speed auto half-duplex vrrp 47 ip 180.40.7.133 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7# R7# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#confi gt ^ % Invalid input detected at '^' marker. R3#confi gt ^ % Invalid input detected at '^' marker. R3#confi ig t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip dhcp ? aaa Configure aaa attributes binding DHCP address bindings bootp BOOTP specific configuration conflict DHCP address conflict parameters database Configure DHCP database agents excluded-address Prevent DHCP from assigning certain addresses limited-broadcast-address Use all 1's broadcast address ping Specify ping parameters used by DHCP pool Configure DHCP address pools relay DHCP relay agent parameters smart-relay Enable Smart Relay feature R3(config)#ip dhcp Prob15 ^ % Invalid input detected at '^' marker. R3(config)#ip dhcp Prob15pProb15oProb15oProb15lProb15 Prob15 R3(dhcp-config)#net R3(dhcp-config)#nete w R3(dhcp-config)#network 180.40.7.128 /27 R3(dhcp-config)#def R3(dhcp-config)#default-router 180.40.7.132 R3(dhcp-config)#dom R3(dhcp-config)#domain-name ? WORD Domain name R3(dhcp-config)#domain-name cciestudne  ent.com R3(dhcp-config)#dn R3(dhcp-config)#dns-server ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#dns-server 208.28.1.82 R3(dhcp-config)#dns-server 208.28.1.82 ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#dns-server 208.28.1.82                        opt R3(dhcp-config)#option ? <0-254> DHCP option code R3(dhcp-config)#option 150 ? ascii Data is an NVT ASCII string hex Data is a hexadecimal string instance Specify the option instance ip Data is one or more IP addresses R3(dhcp-config)#option 150 ip > ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#option 150 ip 20.20.20.20 R3(dhcp-config)#exit R3(config)# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int fa 0/0 R4(config-if)#ip dhc ? relay DHCP relay configuration parameters R4(config-if)#ip dhc       add dhcp ? client-id Specify client-id to use hostname Specify value for hostname option R4(config-if)#ip add dhcp hom  R4(config-if)#ip add dhcp hostname ? WORD hostname string R4(config-if)#ip add dhcp hostname          cl R4(config-if)#ip add dhcp client-id ? FastEthernet FastEthernet IEEE 802.3 R4(config-if)#ip add dhcp client-id r fa R4(config-if)#ip add dhcp client-id fastEthernet ? <0-6> FastEthernet interface number R4(config-if)#ip add dhcp client-id fastEthernet 0/0 ? hostname Specify value for hostname option R4(config-if)#ip add dhcp client-id fastEthernet 0/0                                nt fa 0/0p add d h R4(config-if)#ip add dhcp cl R4(config-if)#ip add dhcp client-id fa R4(config-if)#ip add dhcp client-id fastEthernet ? <0-6> FastEthernet interface number R4(config-if)#ip add dhcp client-id fastEthernet                                    do deb ip dchp                ^Z R4#deb *Mar 2 05:53:53.580: %SYS-5-CONFIG_I: Configured from console by console R4#deb dhcp ? detail DHCP packet content R4#deb dhcp de ? R4#deb dhcp de         ip dhcp ? server DHCP server activity R4#deb ip dhcp         dhcp de DHCP client activity debugging is on (detailed) R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int f 0/0 R4(config-if)#ip add dhcp cli R4(config-if)#ip add dhcp client-id fa`  R4(config-if)#ip add dhcp client-id fastEthernet 0/.0  0 ? hostname Specify value for hostname option R4(config-if)#ip add dhcp client-id fastEthernet 0/0 R4(config-if)# *Mar 2 05:54:28.884: DHCP: DHCP client process started: 10 *Mar 2 05:54:28.888: RAC: Starting DHCP discover on FastEthernet0/0 *Mar 2 05:54:28.888: DHCP: Try 1 to acquire address for FastEthernet0/0 R4(config-if)# *Mar 2 05:54:28.892: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 05:54:28.892: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from EXSTART to DOWN, Neighbor Down: Interface down or detached R4(config-if)# *Mar 2 05:54:32.140: DHCP: Shutting down from get_netinfo() *Mar 2 05:54:32.140: DHCP: Attempting to shutdown DHCP Client R4(config-if)# *Mar 2 05:54:33.920: DHCP: allocate request *Mar 2 05:54:33.920: DHCP: new entry. add to queue *Mar 2 05:54:33.920: DHCP: SDiscover attempt # 1 for entry: *Mar 2 05:54:33.920: Temp IP addr: 0.0.0.0 for peer on Interface: FastEthernet0/0 *Mar 2 05:54:33.920: Temp sub net mask: 0.0.0.0 *Mar 2 05:54:33.920: DHCP Lease server: 0.0.0.0, state: 1 Selecting *Mar 2 05:54:33.920: DHCP transaction id: 66B0589 *Mar 2 05:54:33.920: Lease: 0 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 05:54:33.920: Next timer fires after: 00:00:03 *Mar 2 05:54:33.920: Retry count: 1 Client-ID: 0005.5e7b.c300 *Mar 2 05:54:33.924: Hostname: R4 R4(config-if)# *Mar 2 05:54:33.924: DHCP: SDiscover: sending 274 byte length DHCP packet *Mar 2 05:54:33.924: DHCP: SDiscover 274 bytes *Mar 2 05:54:33.924: B'cast on FastEthernet0/0 interface from 0.0.0.0 R4(config-if)# *Mar 2 05:54:35.932: DHCP: Received a BOOTREP pkt *Mar 2 05:54:35.932: DHCP: Scan: Message type: DHCP Offer *Mar 2 05:54:35.932: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 05:54:35.932: DHCP: Scan: Lease Time: 86400 *Mar 2 05:54:35.932: DHCP: Scan: Renewal time: 43200 *Mar 2 05:54:35.932: DHCP: Scan: Rebind time: 75600 *Mar 2 05:54:35.932: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 05:54:35.932: DHCP: Scan: Router Option: 180.40.7.132 *Mar 2 05:54:35.932: DHCP: Scan: Domain Name: cciestudent.com *Mar 2 05:54:35.932: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 05:54:35.936: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 05:54:35.936: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 05:54:35.936: UDP sport: 43, dport: 44, length: 317 *Mar 2 05:54:35.936: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 05:54:35.936: DHCP server identifier: 180.40.7.129 *Mar 2 05:54 R4(config-if)#:35.936: xid: 66B0589, secs: 0, flags: 8000 *Mar 2 05:54:35.936: client: 0.0.0.0, your: 180.40.7.130 *Mar 2 05:54:35.936: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 05:54:35.936: options block length: 69 *Mar 2 05:54:35.936: DHCP Offer Message Offered Address: 180.40.7.130 *Mar 2 05:54:35.936: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 05:54:35.940: DHCP: Server ID Option: 180.40.7.129 *Mar 2 05:54:35.940: DHCP: offer received from 180.40.7.129 *Mar 2 05:54:35.940: DHCP: SRequest attempt # 1 for entry: *Mar 2 05:54:35.940: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/0 *Mar 2 05:54:35.940: Temp sub net mask: 255.255.255.224 *Mar 2 05:54:35.940: DHCP Lease server: 180.40.7.129, state: 2 Requesting *Mar 2 05:54:35.940: DHCP transaction id: 66B0589 *Mar 2 05:54:35.940: Lease: 86400 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 05:54:35.940: Next timer fires after: 00:00:02 *Mar 2 05:54:35.940: Retry count: 1 Client-ID: 0005.5e7b.c300 *Mar 2 05:54:35.944: Hostname: R4 *Mar 2 05:54:35.944: DHCP: SRequest- Server ID option: 180.40.7.129 *Mar 2 05:54:35.944: DHCP: SRequest- Requested IP addr option: 180.40.7.130 *Mar 2 05:54:35.944: DHCP: SRequest placed lease len option: 86400 *Mar 2 05:54:35.944: DHCP: SRequest: 292 bytes *Mar 2 05:54:35.944: DHCP: SRequest: 292 bytes *Mar 2 05:54:35.944: B'cast on FastEthernet0/0 interface from 0.0.0.0 *Mar 2 05:54:35.952: DHCP: Received a BOOTREP pkt *Mar 2 05:54:35.952: DHCP: Scan: Message type: DHCP Ack *Mar 2 05:54:35.952: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 05:54:35.952: DHCP: Scan: Lease Time: 86400 *Mar 2 05:54:35.952: DHCP: Scan: Renewal time: 43200 *Mar 2 05:54:35.952: DHCP: Scan: Rebind time: 75600 *Mar 2 05:54:35.952: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 05:54:35.952: DHCP: Scan: Router Option: 180.40.7.132 *Mar 2 05:54:35.952: DHCP: Scan: Domain Name: cciestudent.com *Mar 2 05:54:35.956: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 05:54:35.956: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 05:54:35.956: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 05:54:35.956: UDP sport: 43, dport: 44, length: 317 *Mar 2 05:54:35.956: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 05:54:35.956: DHCP server identifier: 180.40.7.129 *Mar 2 05:54:35.956: xid: 66B0589, secs: 0, flags: 8000 *Mar 2 05:54:35.956: client: 0.0.0.0, your: 180.40.7.130 *Mar 2 05:54:35.956: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 05:54:35.956: options block length: 69 *Mar 2 05:54:35.956: DHCP Ack Message *Mar 2 05:54:35.956: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 05:54:35.960: DHCP: Server ID Option: 180.40.7.129 *Mar 2 05:54:38.968: DHCP: Releasing ipl options: *Mar 2 05:54:38.968: DHCP: Applying DHCP options: *Mar 2 05:54:38.972: Setting default_gateway to 180.40.7.132 *Mar 2 05:54:38.972: Adding default route 180.40.7.132 *Mar 2 05:54:39.972: Adding DNS server address 208.28.1.82 *Mar 2 05:54:39.972: Setting default domain to cciestudent.com *Mar 2 05:54:39.972: DHCP Client Pooling: ***Allocated IP address: 180.40.7.130 *Mar 2 05:54:40.068: Allocated IP address = 180.40.7.130 255.255.255.224 *Mar 2 05:54:40.068: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.130, mask 255.255.255.224, hostname R4 R4(config-if)# R4(config-if)# *Mar 2 05:54:46.340: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 2 05:54:46.356: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done R4(config-if)#do sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 180.40.7.132 to network 0.0.0.0 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/793] via 180.40.7.131, 00:00:17, FastEthernet0/0 [110/793] via 180.40.7.129, 00:00:17, FastEthernet0/0 O 20.10.1.0 [110/783] via 180.40.7.131, 00:00:17, FastEthernet0/0 [110/783] via 180.40.7.129, 00:00:17, FastEthernet0/0 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:00:17, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 5 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/782] via 180.40.7.131, 00:00:19, FastEthernet0/0 [110/782] via 180.40.7.129, 00:00:19, FastEthernet0/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:00:19, FastEthernet0/0 --More--  O 180.40.7.0/27 [110/782] via 180.40.7.129, 00:00:19, FastEthernet0/0 O 180.40.7.64/27 [110/782] via 180.40.7.129, 00:00:19, FastEthernet0/0 [110/782] via 180.40.7.131, 00:00:19, FastEthernet0/0 S* 0.0.0.0/0 [254/0] via 180.40.7.132 R4(config-if)#^Z R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Ma R3(config)#do sh ip dhcp n bu in Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 180.40.7.130 0100.055e.7bc3.00 Mar 03 1993 05:52 AM Automatic R3(config)#ip dhcp pool ForR4 R3(dhcp-config)#? DHCP pool configuration commands: accounting Send Accounting Start/Stop messages bootfile Boot file name client-identifier Client identifier client-name Client name default-router Default routers dns-server DNS servers domain-name Domain name exit Exit from DHCP pool configuration mode hardware-address Client hardware address host Client IP address and mask import Programatically importing DHCP option parameters lease Address lease time netbios-name-server NetBIOS (WINS) name servers netbios-node-type NetBIOS node type network Network number and mask next-server Next server in boot process no Negate a command or set its defaults option Raw DHCP options origin Configure the origin of the pool subnet Subnet allocation commands update Dynamic updates --More--   utilization Configure various utilization parameters vrf Associate this pool with a VRF R3(dhcp-config)#ha R3(dhcp-config)#hardware-address 0100.055e.7bc3.00 ? <0-255> ARP hardware type from "Assigned Numbers" RFC ethernet 10Mb Ethernet ieee802 IEEE 802 networks R3(dhcp-config)#hardware-address 0100.055e.7bc3.00 R3(dhcp-config)#ho R3(dhcp-config)#host ? A.B.C.D IP address in dotted-decimal notation R3(dhcp-config)#host 180.40.7.130 /27 % A binding already exists for 180.40.7.130. R3(dhcp-config)#do cli e  a ip dhcp bin % Ambiguous command: "do clea ip dhcp bin" R3(config)#do clea ip dhcp bin * R3(config)#do clea ip dhcp bin *  *  R3(config)# R3(config)# R3(config)# R3(config)#do clea ip dhcp bin * host 180.40.7.130 /27ardware-address 0100.055e.7bc3.00 ip dhcp pool ForR4  R3(dhcp-config)#ip dhcp pool ForR4do clea ip dhcp bin * host 180.40.7.130 /27 R3(dhcp-config)#^Z R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] *Mar R4# RACK18AS>6 [Resuming connection 6 to r6 ... ] 1d05 S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 0/4 S6(config-if)#sp S6(config-if)#spn an S6(config-if)#spanning-tree port S6(config-if)#spanning-tree portf S6(config-if)#spanning-tree portfast %Warning: portfast should only be enabled on ports connected to a single host. Connecting hubs, concentrators, switches, bridges, etc... to this interface when portfast is enabled, can cause temporary bridging loops. Use with CAUTION %Portfast has been configured on FastEthernet0/4 but will only have effect when the interface is in a non-trunking mode. S6(config-if)#^Z S6# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int fa 0/0 R4(config-if)#shut *Mar 2 05:59:50.900: DHCP: SRelease attempt # 1 for entry: *Mar 2 05:59:50.900: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/0 *Mar 2 05:59:50.900: Temp sub net mask: 255.255.255.224 *Mar 2 05:59:50.900: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 05:59:50.904: DHCP transaction id: 66B0589 *Mar 2 05:59:50.904: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 05:59:50.904: Temp default-gateway addr: 180.40.7.132 *Mar 2 05:59:50.904: Next timer fires after: 00:00:00 *Mar 2 05:59:50.904: Retry count: 1 Client-ID: 0005.5e7b.c300 *Mar 2 05:59:50.904: Hostname: R4 *Mar 2 05:59:50.904: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 05:59:50.904: DHCP: SRelease: 259 bytes *Mar 2 05:59:50.972: DHCP: SRelease attempt # 2 for entry: *Mar 2 05:59:50.972: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/0 *Mar 2 05:59:50.972: Temp sub net mask: 255.255.255.224 *Mar 2 05:59:50.972: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 05:59:50.972: DHCP transaction id: 66B0589 *Mar 2 05:59:50.972: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 05:59:50.972: Temp default-gateway addr: 180.40.7.132 *Mar 2 05:59:50.972: Next timer fires after: 00:00:00 *Mar 2 05:59:50.972: Retry count: 2 Client-ID: 0005.5e7b.c300 *Mar 2 05:59:50.972: Hostname: R4 *Mar 2 05:59:50.976: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 05:59:50.976: DHCP: SRelease: 259 bytes *Mar 2 05:59:50.976: DHCP: Releasing ipl options: *Mar 2 05:59:50.976: Clearing default gateway and route to 180.40.7.132 *Mar 2 05:59:50.976: Removing old default route 180.40.7.132 *Mar 2 05:59:50.980: Clearing DNS address 208.28.1.82 *Mar 2 05:59:50.980: Clearing default domain of cciest R4(config-if)#no shutudent.com *Mar 2 05:59:51.900: DHCP: SRelease attempt # 3 for entry: *Mar 2 05:59:51.900: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/0 *Mar 2 05:59:51.900: Temp sub net mask: 255.255.255.224 *Mar 2 05:59:51.900: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 05:59:51.900: DHCP transaction id: 66B0589 *Mar 2 05:59:51.900: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 05:59:51.900: Next timer fires after: 00:00:01 *Mar 2 05:59:51.900: Retry count: 3 Client-ID: 0005.5e7b.c300 *Mar 2 05:59:51.900: Hostname: R4 *Mar 2 05:59:51.900: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 05:59:51.904: DHCP: SRelease: 259 bytes *Mar 2 05:59:52.980: RAC: DHCP stopped on interface FastEthernet0/0 R4(config-if)#no shut *Mar 2 05:59:52.980: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 05:59:52.980: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R4(config-if)#no shut *Mar 2 05:59:54.984: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to administratively down *Mar 2 05:59:55.984: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down R4(config-if)#no shut R4(config-if)# *Mar 2 05:59:57.592: DHCP: DHCP client process started: 10 *Mar 2 05:59:57.592: RAC: Delaying starting DHCP because interface FastEthernet0/0 not up R4(config-if)# *Mar 2 05:59:59.584: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up *Mar 2 05:59:59.584: DHCP: DHCP client process started: 10 *Mar 2 05:59:59.588: RAC: Starting DHCP discover on FastEthernet0/0 *Mar 2 05:59:59.588: DHCP: Try 1 to acquire address for FastEthernet0/0 *Mar 2 05:59:59.604: DHCP: allocate request *Mar 2 05:59:59.604: DHCP: zapping entry in DHC_PURGING state for Fa0/0 *Mar 2 05:59:59.604: DHCP: new entry. add to queue *Mar 2 05:59:59.604: DHCP: SDiscover attempt # 1 for entry: *Mar 2 05:59:59.604: Temp IP addr: 0.0.0.0 for peer on Interface: FastEthernet0/0 *Mar 2 05:59:59.604: Temp sub net mask: 0.0.0.0 *Mar 2 05:59:59.604: DHCP Lease server: 0.0.0.0, state: 1 Selecting R4(config-if)# *Mar 2 05:59:59.604: DHCP transaction id: 66FFD78 *Mar 2 05:59:59.604: Lease: 0 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 05:59:59.608: Next timer fires after: 00:00:03 *Mar 2 05:59:59.608: Retry count: 1 Client-ID: 0005.5e7b.c300 *Mar 2 05:59:59.608: Hostname: R4 *Mar 2 05:59:59.608: DHCP: SDiscover: sending 274 byte length DHCP packet *Mar 2 05:59:59.608: DHCP: SDiscover 274 bytes *Mar 2 05:59:59.608: B'cast on FastEthernet0/0 interface from 0.0.0.0 R4(config-if)# *Mar 2 06:00:00.584: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up R4(config-if)# *Mar 2 06:00:02.604: DHCP: SDiscover attempt # 2 for entry: *Mar 2 06:00:02.604: Temp IP addr: 0.0.0.0 for peer on Interface: FastEthernet0/0 *Mar 2 06:00:02.604: Temp sub net mask: 0.0.0.0 *Mar 2 06:00:02.604: DHCP Lease server: 0.0.0.0, state: 1 Selecting *Mar 2 06:00:02.604: DHCP transaction id: 66FFD78 *Mar 2 06:00:02.604: Lease: 0 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 06:00:02.604: Next timer fires after: 00:00:03 *Mar 2 06:00:02.604: Retry count: 2 Client-ID: 0005.5e7b.c300 *Mar 2 06:00:02.604: Hostname: R4 *Mar 2 06:00:02.604: DHCP: SDiscover: sending 274 byte length DHCP packet *Mar 2 06:00:02.608: DHCP: SDiscover 274 bytes R4(config-if)# *Mar 2 06:00:02.608: B'cast on FastEthernet0/0 interface from 0.0.0.0 R4(config-if)# *Mar 2 06:00:05.604: DHCP: SDiscover attempt # 3 for entry: *Mar 2 06:00:05.604: Temp IP addr: 0.0.0.0 for peer on Interface: FastEthernet0/0 *Mar 2 06:00:05.604: Temp sub net mask: 0.0.0.0 *Mar 2 06:00:05.604: DHCP Lease server: 0.0.0.0, state: 1 Selecting *Mar 2 06:00:05.604: DHCP transaction id: 66FFD78 *Mar 2 06:00:05.604: Lease: 0 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 06:00:05.604: Next timer fires after: 00:00:03 *Mar 2 06:00:05.604: Retry count: 3 Client-ID: 0005.5e7b.c300 *Mar 2 06:00:05.604: Hostname: R4 *Mar 2 06:00:05.604: DHCP: SDiscover: sending 274 byte length DHCP packet *Mar 2 06:00:05.608: DHCP: SDiscover 274 bytes *Mar 2 06:00:05.608: B'cast on FastEthernet0/0 interface from 0.0.0.0 *Mar 2 06:00:05.620: DHCP: Received a BOOTREP pkt *Mar 2 06:00:05.624: DHCP: Scan: Message type: DHCP Offer *Mar 2 06:00:05.624: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 06:00:05.624: DHCP: Sc R4(config-if)#an: Lease Time: 86400 *Mar 2 06:00:05.624: DHCP: Scan: Renewal time: 43200 *Mar 2 06:00:05.624: DHCP: Scan: Rebind time: 75600 *Mar 2 06:00:05.624: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 06:00:05.624: DHCP: Scan: Router Option: 180.40.7.132 *Mar 2 06:00:05.624: DHCP: Scan: Domain Name: cciestudent.com *Mar 2 06:00:05.624: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 06:00:05.624: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 06:00:05.624: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 06:00:05.628: UDP sport: 43, dport: 44, length: 317 *Mar 2 06:00:05.628: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 06:00:05.628: DHCP server identifier: 180.40.7.129 *Mar 2 06:00:05.628: xid: 66FFD78, secs: 0, flags: 8000 *Mar 2 06:00:05.628: client: 0.0.0.0, your: 180.40.7.134 *Mar 2 06:00:05.628: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 06:00:05.628: options block length: 69 *Mar 2 06:00:05.628: DHCP Offer Message Offered Address: 180.40.7.134 *Mar 2 06:00:05.628: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 06:00:05.628: DHCP: Server ID Option: 180.40.7.129 *Mar 2 06:00:05.628: DHCP: offer received from 180.40.7.129 *Mar 2 06:00:05.632: DHCP: SRequest attempt # 1 for entry: *Mar 2 06:00:05.632: Temp IP addr: 180.40.7.134 for peer on Interface: FastEthernet0/0 *Mar 2 06:00:05.632: Temp sub net mask: 255.255.255.224 *Mar 2 06:00:05.632: DHCP Lease server: 180.40.7.129, state: 2 Requesting *Mar 2 06:00:05.632: DHCP transaction id: 66FFD78 *Mar 2 06:00:05.632: Lease: 86400 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 06:00:05.632: Next timer fires after: 00:00:02 *Mar 2 06:00:05.632: Retry count: 1 Client-ID: 0005.5e7b.c300 *Mar 2 06:00:05.632: Hostname: R4 *Mar 2 06:00:05.632: DHCP: SRequest- Server ID option: 180.40.7.129 *Mar 2 06:00:05.636: DHCP: SRequest- Requested IP addr option: 180.40.7.134 *Mar 2 06:00:05.636: DHCP: SRequest placed lease len option: 86400 *Mar 2 06:00:05.636: DHCP: SRequest: 292 bytes *Mar 2 06:00:05.636: DHCP: SRequest: 292 bytes *Mar 2 06:00:05.636: B'cast on FastEthernet0/0 interface from 0.0.0.0 *Mar 2 06:00:05.636: DHCP: Received a BOOTREP pkt *Mar 2 06:00:05.636: DHCP: Scan: Message type: DHCP Offer *Mar 2 06:00:05.636: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 06:00:05.640: DHCP: Scan: Lease Time: 86400 *Mar 2 06:00:05.640: DHCP: Scan: Renewal time: 43200 *Mar 2 06:00:05.640: DHCP: Scan: Rebind time: 75600 *Mar 2 06:00:05.640: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 06:00:05.640: DHCP: Scan: Router Option: 180.40.7.132 *Mar 2 06:00:05.640: DHCP: Scan: Domain Name: cciestudent.com *Mar 2 06:00:05.640: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 06:00:05.640: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 06:00:05.640: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 06:00:05.644: UDP sport: 43, dport: 44, length: 317 *Mar 2 06:00:05.644: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 06:00:05.644: DHCP server identifier: 180.40.7.129 *Mar 2 06:00:05.644: xid: 66FFD78, secs: 0, flags: 8000 *Mar 2 06:00:05.644: client: 0.0.0.0, your: 180.40.7.134 *Mar 2 06:00:05.644: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 06:00:05.644: options block length: 69 *Mar 2 06:00:05.644: DHCP Offer Message Offered Address: 180.40.7.134 *Mar 2 06:00:05.644: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 06:00:05.644: DHCP: Server ID Option: 180.40.7.129 *Mar 2 06:00:05.644: DHCP: offer received from 180.40.7.129 *Mar 2 06:00:05.648: DHCP: offer received in bad state: Requesting punt *Mar 2 06:00:05.648: DHCP: Received a BOOTREP pkt *Mar 2 06:00:05.648: DHCP: Scan: Message type: DHCP Ack *Mar 2 06:00:05.648: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 06:00:05.648: DHCP: Scan: Lease Time: 86400 *Mar 2 06:00:05.652: DHCP: Scan: Renewal time: 43200 *Mar 2 06:00:05.652: DHCP: Scan: Rebind time: 75600 *Mar 2 06:00:05.652: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 06:00:05.652: DHCP: Scan: Router Option: 180.40.7.132 *Mar 2 06:00:05.652: DHCP: Scan: Domain Name: cciestudent.com *Mar 2 06:00:05.652: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 06:00:05.652: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 06:00:05.652: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 06:00:05.652: UDP sport: 43, dport: 44, length: 317 *Mar 2 06:00:05.652: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 06:00:05.652: DHCP server identifier: 180.40.7.129 *Mar 2 06:00:05.652: xid: 66FFD78, secs: 0, flags: 8000 *Mar 2 06:00:05.656: client: 0.0.0.0, your: 180.40.7.134 *Mar 2 06:00:05.656: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 06:00:05.656: options block length: 69 *Mar 2 06:00:05.656: DHCP Ack Message *Mar 2 06:00:05.656: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 06:00:05.656: DHCP: Server ID Option: 180.40.7.129 *Mar 2 06:00:08.664: DHCP: Releasing ipl options: *Mar 2 06:00:08.664: DHCP: Applying DHCP options: *Mar 2 06:00:08.668: Setting default_gateway to 180.40.7.132 *Mar 2 06:00:08.668: Adding default route 180.40.7.132 *Mar 2 06:00:09.668: Adding DNS server address 208.28.1.82 *Mar 2 06:00:09.668: Setting default domain to cciestudent.com *Mar 2 06:00:09.668: DHCP Client Pooling: ***Allocated IP address: 180.40.7.134 *Mar 2 06:00:09.744: Allocated IP address = 180.40.7.134 255.255.255.224 *Mar 2 06:00:09.744: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.134, mask 255.255.255.224, hostname R4 R4(config-if)# R4(config-if)# *Mar 2 06:00:16.356: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 2 06:00:16.360: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done R4(config-if)# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Mar R3#sh *Mar 2 05:58:07.805: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Dead timer expired R3#sh    config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#pool      i ip dhcp pool ForR4 R3(dhcp-config)#ip dhcp pool ForR4host 180.40.7.130 /27ip dhcp pool ForR4 do clea ip dhcp bin * host 180.40.7.130 /27ardware-address 0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00  0100.055e.7bc3.00 c 0100.055e.7bc3.00 l 0100.055e.7bc3.00 i 0100.055e.7bc3.00 e 0100.055e.7bc3.00 n 0100.055e.7bc3.00 t 0100.055e.7bc3.00 - 0100.055e.7bc3.00 i 0100.055e.7bc3.00 d 0100.055e.7bc3.00  R3(dhcp-config)#^Z R3#sh run i *Mar 2 05:58:41.167: %SYS-5-CONFIG_I: Configured from console by console R3#sh run in  | b pool ip dhcp pool Prob15 network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 domain-name cciestudent.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! ip dhcp pool ForR4 host 180.40.7.130 255.255.255.224 client-identifier 0100.055e.7bc3.00 ! ip cef no ip domain lookup ip audit po max-events 100 ! ! ! ! ! ! ! ! ! --More--   R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] *Ma R4(config-if)#shu *Mar 2 06:01:23.992: DHCP: SRelease attempt # 1 for entry: *Mar 2 06:01:23.992: Temp IP addr: 180.40.7.134 for peer on Interface: FastEthernet0/0 *Mar 2 06:01:23.996: Temp sub net mask: 255.255.255.224 *Mar 2 06:01:23.996: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 06:01:23.996: DHCP transaction id: 66FFD78 *Mar 2 06:01:23.996: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 06:01:23.996: Temp default-gateway addr: 180.40.7.132 *Mar 2 06:01:23.996: Next timer fires after: 00:00:00 *Mar 2 06:01:23.996: Retry count: 1 Client-ID: 0005.5e7b.c300 *Mar 2 06:01:23.996: Hostname: R4 *Mar 2 06:01:23.996: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 06:01:23.996: DHCP: SRelease: 259 bytes *Mar 2 06:01:24.064: DHCP: SRelease attempt # 2 for entry: *Mar 2 06:01:24.064: Temp IP addr: 180.40.7.134 for peer on Interface: FastEthernet0/0 *Mar 2 06:01:24.064: Temp sub net mask: 255.255.255.224 *Mar 2 06:01:24.064: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 06:01:24.064: DHCP transaction id: 66FFD78 *Mar 2 06:01:24.064: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 06:01:24.064: Temp default-gateway addr: 180.40.7.132 *Mar 2 06:01:24.064: Next timer fires after: 00:00:00 *Mar 2 06:01:24.064: Retry count: 2 Client-ID: 0005.5e7b.c300 *Mar 2 06:01:24.064: Hostname: R4 *Mar 2 06:01:24.068: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 06:01:24.068: DHCP: SRelease: 259 bytes *Mar 2 06:01:24.068: DHCP: Releasing ipl options: *Mar 2 06:01:24.068: Clearing default gateway and route to 180.40.7.132 *Mar 2 06:01:24.068: Removing old default route 180.40.7.132 *Mar 2 06:01:24.072: Clearing DNS address 208.28.1.82 *Mar 2 06:01:24.072: Clearing default domain of cciest R4(config-if)#no udent.com *Mar 2 06:01:24.992: DHCP: SRelease attempt # 3 for entry: *Mar 2 06:01:24.992: Temp IP addr: 180.40.7.134 for peer on Interface: FastEthernet0/0 *Mar 2 06:01:24.992: Temp sub net mask: 255.255.255.224 *Mar 2 06:01:24.992: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 06:01:24.992: DHCP transaction id: 66FFD78 *Mar 2 06:01:24.992: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 06:01:24.992: Next timer fires after: 00:00:01 *Mar 2 06:01:24.992: Retry count: 3 Client-ID: 0005.5e7b.c300 *Mar 2 06:01:24.992: Hostname: R4 *Mar 2 06:01:24.992: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 06:01:24.996: DHCP: SRelease: 259 bytes *Mar 2 06:01:26.072: RAC: DHCP stopped on interface FastEthernet0/0 R4(config-if)#no *Mar 2 06:01:26.072: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 06:01:26.072: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R4(config-if)#no shut R4(config-if)# *Mar 2 06:01:28.076: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to administratively down *Mar 2 06:01:29.024: DHCP: DHCP client process started: 10 *Mar 2 06:01:29.024: RAC: Delaying starting DHCP because interface FastEthernet0/0 not up R4(config-if)# *Mar 2 06:01:29.076: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down R4(config-if)# *Mar 2 06:01:31.016: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up *Mar 2 06:01:31.016: DHCP: DHCP client process started: 10 *Mar 2 06:01:31.020: RAC: Starting DHCP discover on FastEthernet0/0 *Mar 2 06:01:31.020: DHCP: Try 1 to acquire address for FastEthernet0/0 *Mar 2 06:01:31.036: DHCP: allocate request *Mar 2 06:01:31.036: DHCP: zapping entry in DHC_PURGING state for Fa0/0 *Mar 2 06:01:31.036: DHCP: new entry. add to queue *Mar 2 06:01:31.036: DHCP: SDiscover attempt # 1 for entry: *Mar 2 06:01:31.036: Temp IP addr: 0.0.0.0 for peer on Interface: FastEthernet0/0 *Mar 2 06:01:31.036: Temp sub net mask: 0.0.0.0 *Mar 2 06:01:31.036: DHCP Lease server: 0.0.0.0, state: 1 Selecting R4(config-if)# *Mar 2 06:01:31.036: DHCP transaction id: 6716026 *Mar 2 06:01:31.036: Lease: 0 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 06:01:31.036: Next timer fires after: 00:00:03 *Mar 2 06:01:31.040: Retry count: 1 Client-ID: 0005.5e7b.c300 *Mar 2 06:01:31.040: Hostname: R4 *Mar 2 06:01:31.040: DHCP: SDiscover: sending 274 byte length DHCP packet *Mar 2 06:01:31.040: DHCP: SDiscover 274 bytes *Mar 2 06:01:31.040: B'cast on FastEthernet0/0 interface from 0.0.0.0 R4(config-if)# *Mar 2 06:01:32.016: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up R4(config-if)# *Mar 2 06:01:34.036: DHCP: SDiscover attempt # 2 for entry: *Mar 2 06:01:34.036: Temp IP addr: 0.0.0.0 for peer on Interface: FastEthernet0/0 *Mar 2 06:01:34.036: Temp sub net mask: 0.0.0.0 *Mar 2 06:01:34.036: DHCP Lease server: 0.0.0.0, state: 1 Selecting *Mar 2 06:01:34.036: DHCP transaction id: 6716026 *Mar 2 06:01:34.036: Lease: 0 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 06:01:34.036: Next timer fires after: 00:00:03 *Mar 2 06:01:34.036: Retry count: 2 Client-ID: 0005.5e7b.c300 *Mar 2 06:01:34.036: Hostname: R4 *Mar 2 06:01:34.036: DHCP: SDiscover: sending 274 byte length DHCP packet *Mar 2 06:01:34.040: DHCP: SDiscover 274 bytes *Mar 2 06:01:34.040: B'cast on FastEthernet0/0 interface from 0.0.0.0 *Mar 2 06:01:34.044: DHCP: Received a BOOTREP pkt *Mar 2 06:01:34.044: DHCP: Scan: Message type: DHCP Offer *Mar 2 06:01:34.044: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 06:01:34.048: DHCP: Sc R4(config-if)#an: Lease Time: 86400 *Mar 2 06:01:34.048: DHCP: Scan: Renewal time: 43200 *Mar 2 06:01:34.048: DHCP: Scan: Rebind time: 75600 *Mar 2 06:01:34.048: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 06:01:34.048: DHCP: Scan: Router Option: 180.40.7.132 *Mar 2 06:01:34.048: DHCP: Scan: Domain Name: cciestudent.com *Mar 2 06:01:34.048: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 06:01:34.048: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 06:01:34.048: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 06:01:34.048: UDP sport: 43, dport: 44, length: 317 *Mar 2 06:01:34.048: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 06:01:34.048: DHCP server identifier: 180.40.7.129 *Mar 2 06:01:34.052: xid: 6716026, secs: 0, flags: 8000 *Mar 2 06:01:34.052: client: 0.0.0.0, your: 180.40.7.130 *Mar 2 06:01:34.052: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 06:01:34.052: options block length: 69 *Mar 2 06:01:34.052: DHCP Offer Message Offered Address: 180.40.7.130 *Mar 2 06:01:34.052: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 06:01:34.052: DHCP: Server ID Option: 180.40.7.129 *Mar 2 06:01:34.052: DHCP: offer received from 180.40.7.129 *Mar 2 06:01:34.052: DHCP: SRequest attempt # 1 for entry: *Mar 2 06:01:34.052: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/0 *Mar 2 06:01:34.056: Temp sub net mask: 255.255.255.224 *Mar 2 06:01:34.056: DHCP Lease server: 180.40.7.129, state: 2 Requesting *Mar 2 06:01:34.056: DHCP transaction id: 6716026 *Mar 2 06:01:34.056: Lease: 86400 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 06:01:34.056: Next timer fires after: 00:00:01 *Mar 2 06:01:34.056: Retry count: 1 Client-ID: 0005.5e7b.c300 *Mar 2 06:01:34.056: Hostname: R4 *Mar 2 06:01:34.056: DHCP: SRequest- Server ID option: 180.40.7.129 *Mar 2 06:01:34.056: DHCP: SRequest- Requested IP addr option: 180.40.7.130 *Mar 2 06:01:34.056: DHCP: SRequest placed lease len option: 86400 *Mar 2 06:01:34.056: DHCP: SRequest: 292 bytes *Mar 2 06:01:34.060: DHCP: SRequest: 292 bytes *Mar 2 06:01:34.060: B'cast on FastEthernet0/0 interface from 0.0.0.0 *Mar 2 06:01:34.064: DHCP: Received a BOOTREP pkt *Mar 2 06:01:34.064: DHCP: Scan: Message type: DHCP Ack *Mar 2 06:01:34.064: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 06:01:34.068: DHCP: Scan: Lease Time: 86400 *Mar 2 06:01:34.068: DHCP: Scan: Renewal time: 43200 *Mar 2 06:01:34.068: DHCP: Scan: Rebind time: 75600 *Mar 2 06:01:34.068: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 06:01:34.068: DHCP: Scan: Router Option: 180.40.7.132 *Mar 2 06:01:34.068: DHCP: Scan: Domain Name: cciestudent.com *Mar 2 06:01:34.068: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 06:01:34.068: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 06:01:34.068: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 06:01:34.068: UDP sport: 43, dport: 44, length: 317 *Mar 2 06:01:34.068: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 06:01:34.068: DHCP server identifier: 180.40.7.129 *Mar 2 06:01:34.072: xid: 6716026, secs: 0, flags: 8000 *Mar 2 06:01:34.072: client: 0.0.0.0, your: 180.40.7.130 *Mar 2 06:01:34.072: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 06:01:34.072: options block length: 69 *Mar 2 06:01:34.072: DHCP Ack Message *Mar 2 06:01:34.072: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 06:01:34.072: DHCP: Server ID Option: 180.40.7.129 *Mar 2 06:01:37.080: DHCP: Releasing ipl options: *Mar 2 06:01:37.080: DHCP: Applying DHCP options: *Mar 2 06:01:37.084: Setting default_gateway to 180.40.7.132 *Mar 2 06:01:37.084: Adding default route 180.40.7.132 *Mar 2 06:01:38.084: Adding DNS server address 208.28.1.82 *Mar 2 06:01:38.084: Setting default domain to cciestudent.com *Mar 2 06:01:38.084: DHCP Client Pooling: ***Allocated IP address: 180.40.7.130 *Mar 2 06:01:38.208: Allocated IP address = 180.40.7.130 255.255.255.224 *Mar 2 06:01:38.208: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.130, mask 255.255.255.224, hostname R4 R4(config-if)# R4(config-if)# *Mar 2 06:01:46.360: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 2 06:01:46.364: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done R4(config-if)# R4(config-if)# R4(config-if)# R4(config-if)# R4(config-if)#^Z R4# *Mar 2 06:01:51.924: %SYS-5-CONFIG_I: Configured from console by console R4# R4# R4# R4# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Mar R3# *Mar 2 05:59:37.500: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Dead timer expired R3#^x4 % Unknown command or computer name, or unable to find computer address R3# R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] *Mar 2 06:01:55.992: DHCP: QScan: Pu R4#u all All possible debugging has been turned off R4# RACK18AS>7 [Resuming connection 7 to r7 ... ] *Mar 1 R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0.1  /1 R7(config-if)#ip a hel R7(config-if)#ip help R7(config-if)#ip helper-address 180.40.7.66 R7(config-if)#^Z R7# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#confi gt ^ % Invalid input detected at '^' marker. R3#i config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#ip dhcp      add dhcp R3(config-if)# *Mar 2 06:01:13.325: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from 2WAY to DOWN, Neighbor Down: Interface down or detached *Mar 2 06:01:13.329: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R3(config-if)# *Mar 2 06:01:13.329: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Init *Mar 2 06:01:13.333: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Master -> Disable R3(config-if)#exit R3(config)#do sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 unassigned YES DHCP up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 180.40.7.66 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.1 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--   R3(config)#do sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 unassigned YES DHCP up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 180.40.7.66 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.1 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--   R3(config)#do sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 unassigned YES DHCP up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 180.40.7.66 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.1 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--   R3(config)#do sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 unassigned YES DHCP up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 180.40.7.66 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.1 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--   R3(config)#do sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 unassigned YES DHCP up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 180.40.7.66 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.1 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--   R3(config)#do sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 unassigned YES DHCP up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 180.40.7.66 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.1 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--   R3(config)# RACK18AS>7 [Resuming connection 7 to r7 ... ] *Ma R7#sh run int f a0/1 ^ % Invalid input detected at '^' marker. R7#sh run int f a0/1a0/1  Building configuration... Current configuration : 232 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 speed auto half-duplex vrrp 47 ip 180.40.7.133 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7#p 180.40.7.66 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.66, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/58/60 ms R7# RACK18AS>3 [Resuming connection 3 to r3 ... ] *Mar R3(config)# *Mar 2 06:02:18.936: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.135, mask 255.255.255.224, hostname R3 *Mar 2 06:02:18.936: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Listen -> Active R3(config)#do sh ip int brie *Mar 2 06:02:21.428: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Master R3(config)#do sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 180.40.7.135 YES DHCP up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 180.40.7.66 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.1 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--   R3(config)# *Mar 2 06:02:27.871: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 2 06:02:27.875: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from LOADING to FULL, Loading Done R3(config)#ip dhcp ex R3(config)#ip dhcp excluded-address ? A.B.C.D Low IP address R3(config)#ip dhcp excluded-address 180.407.  .7.131 180.40.7.134 R3(config)#do sh ip dhcp bin Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 180.40.7.130 0100.055e.7bc3.00 Infinite Manual 180.40.7.135 0063.6973.636f.2d30. Mar 03 1993 06:02 AM Automatic 3031.332e.3630.3330. 2e35.6663.302d.4661. 302f.30 R3(config)#ip dhcp For   pool ForR3 R3(dhcp-config)#cli R3(dhcp-config)#client-i R3(dhcp-config)#client-identifier 0063.6973.636f.2d30.3031.332e.3630.3330.2e3$tifier 0063.6973.636f.2d30.3031.332e.3630.3330.2e35 .6663.3023.6973.636f.2d30.3031.332e.3630.3330.2e35.6663.302d .4661.302f.2d30.3031.332e.3630.3330.2e35.6663.302d.4661.302f .30 R3(dhcp-config)#do clea       exit R3(config)#do clea ip dhcp bin * R3(config)#do clea ip dhcp bin *exit $3.6973.636f.2d30.3031.332e.3630.3330.2e35.6663.302d.4661.302f.30ip dhcp pool ForR3  R3(dhcp-config)#host 180.40.7.129 /27 R3(dhcp-config)#^Z R3# *Mar 2 06:06:08.268: %SYS-5-CONFIG_I: Configured from console by console R3# R3# R3# R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] *M R4#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 180.40.7.132 to network 0.0.0.0 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/793] via 180.40.7.131, 00:04:01, FastEthernet0/0 [110/793] via 180.40.7.135, 00:04:01, FastEthernet0/0 O 20.10.1.0 [110/783] via 180.40.7.131, 00:04:01, FastEthernet0/0 [110/783] via 180.40.7.135, 00:04:01, FastEthernet0/0 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:04:01, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 5 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/782] via 180.40.7.131, 00:04:03, FastEthernet0/0 [110/782] via 180.40.7.135, 00:04:03, FastEthernet0/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:04:03, FastEthernet0/0 --More--  O 180.40.7.0/27 [110/782] via 180.40.7.135, 00:04:03, FastEthernet0/0 O 180.40.7.64/27 [110/782] via 180.40.7.131, 00:04:03, FastEthernet0/0 [110/782] via 180.40.7.135, 00:04:03, FastEthernet0/0 S* 0.0.0.0/0 [254/0] via 180.40.7.132 R4# RACK18AS>2 3 [Resuming connection 3 to r3 ... ] R3#sh run | b h dhcp ip dhcp excluded-address 180.40.7.131 180.40.7.134 ! ip dhcp pool Prob15 network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 domain-name cciestudent.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! ip dhcp pool ForR4 host 180.40.7.130 255.255.255.224 client-identifier 0100.055e.7bc3.00 ! ip dhcp pool ForR3 host 180.40.7.129 255.255.255.224 client-identifier 0063.6973.636f.2d30.3031.332e.3630.3330.2e35.6663.302d.4661.302f.30 ! ip cef no ip domain lookup ip audit po max-events 100 ! ! --More--   R3# RACK18AS>7 [Resuming connection 7 to r7 ... ] *M R7#sh run int fa 0/;1  1 Building configuration... Current configuration : 232 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 speed auto half-duplex vrrp 47 ip 180.40.7.133 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7# R7# RACK18AS>2 [Resuming connection 2 to r2 ... ] *Mar R2#confi gt ^ % Invalid input detected at '^' marker. R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#ip dhcp pool ForS6 R2(dhcp-config)# host 180.40.7.97 255.255.255.224 R2(dhcp-config)# client-identifier 0063.6973.636f.2d30.3031.332e.3830.6366.$dentifier 0063.6973.636f.2d30.3031.332e.3830.6366.2 e62.3938.0063.6973.636f.2d30.3031.332e.3830.6366.2e62.3938.3 02d.4661.636f.2d30.3031.332e.3830.6366.2e62.3938.302d.4661.3 02f.32 R2(dhcp-config)#! R2(dhcp-config)#int fa 0/1 R2(config-if)#ip help R2(config-if)#ip helper-address 208.28.1.99 R2(config-if)#^Z R2# *Mar 2 06:11:09.057: %SYS-5-CONFIG_I: Configured from console by console R2# RACK18AS>7 [Resuming connection 7 to r7 ... ] R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/o0.2 ^ % Invalid input detected at '^' marker. R7(config)#int s 1/o0.2o0.2  R7(config-subif)#ip help R7(config-subif)#ip helper-address 208.28.1.1 99 R7(config-subif)#fram R7(config-subif)#frame-relay map R7(config-subif)#frame-relay map ip 17 80.40.7.163 2 702 Only frame-relay interface-dlci command should beused on point-to-point interfaces not frame-relay map R7(config-subif)#do sh run tin   int s 1/0.2 Building configuration... Current configuration : 239 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 end R7(config-subif)# frame-relay interface-dlci 702 ? cisco Use CISCO Encapsulation ietf Use RFC1490/RFC2427 Encapsulation ppp Use RFC1973 Encapsulation to support PPP over FR protocol Optional protocol information for remote end R7(config-subif)# frame-relay interface-dlci 702 pro R7(config-subif)# frame-relay interface-dlci 702 protocol ? A.B.C.D Protocol specific address ip IP R7(config-subif)# frame-relay interface-dlci 702 protocol 180.40.7.162 ? R7(config-subif)# frame-relay interface-dlci 702 protocol 180.40.7.162 %Can't add another VC to point-to-point subinterface R7(config-fr-dlci)#no frame-relay interface-dlci 702 R7(config-subif)#no frame-relay interface-dlci 702 frame-relay interface-dlci 702 protocol 180.40.7.162 R7(config-fr-dlci)# *Mar 1 19:55:25.525: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from FULL to DOWN, Neighbor Down: Interface down or detached R7(config-fr-dlci)# *Mar 1 19:55:32.632: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from LOADING to FULL, Loading Done R7(config-fr-dlci)#^Z R7# *Mar 1 19:57:09.884: %SYS-5-CONFIG_I: Configured from console by console R7#sh run int s 1/0.2 Building configuration... Current configuration : 261 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 protocol ip 180.40.7.162 end R7# R7# RACK18AS>2 [Resuming connection 2 to r2 ... ] *Ma R2#sh run int fa 0/1 Building configuration... Current configuration : 125 bytes ! interface FastEthernet0/1 ip address 20.10.1.1 255.255.255.0 ip helper-address 208.28.1.99 duplex auto speed auto end R2# R2#sh run | b ip dhcp ip dhcp pool ForS6 host 180.40.7.97 255.255.255.224 client-identifier 0063.6973.636f.2d30.3031.332e.3830.6366.2e62.3938.302d.4661.302f.32 ! ip cef no ip domain lookup ip audit po max-events 100 frame-relay de-list 1 protocol ip list 100 ! ! ! ! ! ! ! ! ! ! ! ! ! ! --More--   R2# RACK18AS>7 [Resuming connection 7 to r7 ... ] R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/1 R7(config-if)#ip gl R7(config-if)#ip gl     gl R7(config-if)#glbp 47 ? authentication Authentication method forwarder Forwarder configuration ip Enable group and set virtual IP address load-balancing Load balancing method preempt Overthrow lower priority designated routers priority Priority level timers Adjust GLBP timers weighting Gateway weighting and tracking R7(config-if)#glbp 47 ip ? A.B.C.D Virtual IP address R7(config-if)#glbp 47 ip            exit R7(config)#class R7(config)#class-map test R7(config-cmap)#mat ? access-group Access group any Any packets class-map Class map cos IEEE 802.1Q/ISL class of service/user priority values destination-address Destination address discard-class Discard behavior identifier dscp Match DSCP in IP(v4) and IPv6 packets fr-de Match on Frame-relay DE bit fr-dlci Match on fr-dlci input-interface Select an input interface to match ip IP specific values mpls Multi Protocol Label Switching specific values not Negate this match result packet Layer 3 Packet length precedence Match Precedence in IP(v4) and IPv6 packets protocol Protocol qos-group Qos-group source-address Source address R7(config-cmap)#mat de R7(config-cmap)#mat destination-address ? mac MAC address R7(config-cmap)#mat destination-address                         m des R7(config-cmap)#description             mat R7(config-cmap)#match sou R7(config-cmap)#match source-address ? mac MAC address R7(config-cmap)#match source-address                      match ip ? dscp Match IP DSCP (DiffServ CodePoints) precedence Match IP precedence rtp Match RTP port nos R7(config-cmap)#match ip    acc R7(config-cmap)#match access-group ? <1-2699> Access list index name Named Access List R7(config-cmap)#match access-group                    ^Z R7# *Mar 1 20:42:23.548: %SYS-5-CONFIG_I: Configured from console by console R7#sh ip nbar port ? bgp Border Gateway Protocol citrix Citrix Traffic cuseeme CU-SeeMe desktop video conference custom-01 Custom protocol custom-01 custom-02 Custom protocol custom-02 custom-03 Custom protocol custom-03 custom-04 Custom protocol custom-04 custom-05 Custom protocol custom-05 custom-06 Custom protocol custom-06 custom-07 Custom protocol custom-07 custom-08 Custom protocol custom-08 custom-09 Custom protocol custom-09 custom-10 Custom protocol custom-10 dhcp Dynamic Host Configuration dns Domain Name Server lookup egp Exterior Gateway Protocol eigrp Enhanced Interior Gateway Routing Protocol exchange MS-RPC for Exchange fasttrack FastTrack Traffic - KaZaA, Morpheus, Grokster... finger Finger ftp File Transfer Protocol gnutella Gnutella Traffic - BearShare,LimeWire,Gnotella... --More--   R7#sh ip nbar port sqlser port-map sqlserver tcp 1433 R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/1 R7(config-if)#gl R7(config-if)#glbp ? <0-1023> Group number R7(config-if)#glbp 47 ? authentication Authentication method forwarder Forwarder configuration ip Enable group and set virtual IP address load-balancing Load balancing method preempt Overthrow lower priority designated routers priority Priority level timers Adjust GLBP timers weighting Gateway weighting and tracking R7(config-if)#glbp 47 ip ? A.B.C.D Virtual IP address R7(config-if)#glbp 47 ip 180.40.7.134 R7(config-if)#do sh glbp FastEthernet0/1 - Group 47 State is Listen Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 0.596 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is unknown Standby is unknown Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Load balancing: round-robin There are no forwarders R7(config-if)# *Mar 1 22:27:53.208: %GLBP-6-STATECHANGE: FastEthernet0/1 Grp 47 state Standby -> Active R7(config-if)#do sh glbp FastEthernet0/1 - Group 47 State is Active 2 state changes, last state change 00:00:09 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 2.615 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is local Standby is unknown Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Load balancing: round-robin There is 1 forwarder (0 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (default) Owner ID is 0013.6030.5fa1 Redirection enabled Preemption enabled, min delay 30 sec Active is unknown R7(config-if)# *Mar 1 22:28:03.209: %GLBP-6-FWDSTATECHANGE: FastEthernet0/1 Grp 47 Fwd 1 state Listen -> Active R7(config-if)# R7(config-if)# R7(config-if)#do sh glbp FastEthernet0/1 - Group 47 State is Active 2 state changes, last state change 00:00:16 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.850 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is local Standby is unknown Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Load balancing: round-robin There is 1 forwarder (1 active) Forwarder 1 State is Active 1 state change, last state change 00:00:06 MAC address is 0007.b400.2f01 (default) Owner ID is 0013.6030.5fa1 Redirection enabled Preemption enabled, min delay 30 sec Active is local, weighting 100 R7(config-if)#exit R7(config)#trac R7(config)#track ? <1-500> Tracked object resolution Tracking resolution parameters timer Polling interval timers R7(config)#track 1 ? interface Select an interface to track ip IP protocol R7(config)#track 1 ip ? route IP route R7(config)#track 1 ip rou ? A.B.C.D {/nn || A.B.C.D} Prefix and mask R7(config)#track 1 ip rou 20.10.1.0/24 re R7(config)#track 1 ip rou 20.10.1.0/24 reachability R7(config-track)#int fa 0/. 0 1 R7(config-if)#gl R7(config-if)#glbp 47 tr R7(config-if)#glbp 47 tr  wer i R7(config-if)#glbp 47 weighting ? <1-254> Weighting maximum value track Interface tracking R7(config-if)#glbp 47 weighting t R7(config-if)#glbp 47 weighting track ? <1-500> Tracked object R7(config-if)#glbp 47 weighting track 1 ? decrement Weighting decrement R7(config-if)#glbp 47 weighting track 1 de R7(config-if)#glbp 47 weighting track 1 decrement ? <1-255> Decrement value R7(config-if)#glbp 47 weighting track 1 decrement 100 R7(config-if)# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#gl R3(config-if)#glbp 47 ip 180.40.7.134 R3(config-if)#gl R3(config-if)#glbp 47 wi ei R3(config-if)#glbp 47 weighting ? <1-254> Weighting maximum value track Interface tracking R3(config-if)#glbp 47 weighting tr R3(config-if)#glbp 47 weighting track ? <1-500> Tracked object R3(config-if)#glbp 47 weighting track 3 ? decrement Weighting decrement R3(config-if)#glbp 47 weighting track 3 *Mar 2 09:02:24.546: %GLBP-6-FWDSTATECHANGE: FastEthernet0/0 Grp 47 Fwd 2 state Listen -> Active R3(config-if)#glbp 47 weighting track 3 dec ? <1-255> Decrement value R3(config-if)#glbp 47 weighting track 3 dec 100 R3(config-if)#gl R3(config-if)#glbp      glbp 47 weighting track 3 dec 100           ? <1-500> Tracked object R3(config-if)#glbp 47 weighting track 1 dec 1                               do sh run int s 1/    fa 0/0 Building configuration... Current configuration : 404 bytes ! interface FastEthernet0/0 ip address dhcp ip policy route-map Prob1 duplex auto speed auto vrrp 47 ip 180.40.7.133 vrrp 47 priority 111 glbp 47 ip 180.40.7.134 glbp 47 weighting track 3 decrement 100 standby 47 ip 180.40.7.132 standby 47 priority 101 standby 47 preempt standby 47 track Serial1/0 standby 47 track Serial1/2 standby 47 track 3 decrement 75 service-policy input test end R3(config-if)#q do sh run int fa 0/0glbp 47 weighting track 3 dec 100 dec 100 2 dec 100 R3(config-if)#^Z R3#sh run *Mar 2 09:03:31.363: %SYS-5-CONFIG_I: Configured from console by console R3#sh run     gl R3#sh glbp FastEthernet0/0 - Group 47 State is Standby 1 state change, last state change 00:01:04 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.028 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 8.713 sec) Standby is local Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Track object 2 state Up decrement 100 Track object 3 state Up decrement 100 Load balancing: round-robin There are 2 forwarders (1 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 0013.6030.5fa1 Time to live: 14398.713 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 8.709 sec) --More--   Forwarder 2 State is Active 1 state change, last state change 00:01:33 MAC address is 0007.b400.2f02 (default) Owner ID is 0013.6030.5fc0 Preemption enabled, min delay 30 sec Active is local, weighting 100 R3# RACK18AS>4 [Resuming connection 4 to r4 ... ] R4#ping 180.40.7.134 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.134, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 1/3/4 ms R4#sh arp Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.131 186 0013.6030.5fa1 ARPA FastEthernet0/0 Internet 180.40.7.130 - 0005.5e7b.c300 ARPA FastEthernet0/0 Internet 180.40.7.129 186 0013.6030.5fc0 ARPA FastEthernet0/0 Internet 180.40.7.135 183 0013.6030.5fc0 ARPA FastEthernet0/0 Internet 180.40.7.134 0 0007.b400.2f01 ARPA FastEthernet0/0 R4# RACK18AS>7 [Resuming connection 7 to r7 ... ] R7(config-if)#^Z R7#sh gl *Mar 1 22:46:56.218: %SYS-5-CONFIG_I: Configured from console by console R7#sh gl FastEthernet0/1 - Group 47 State is Active 2 state changes, last state change 00:19:04 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.385 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is local Standby is 180.40.7.135, priority 100 (expires in 7.696 sec) Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Track object 1 state Up decrement 100 Load balancing: round-robin There are 2 forwarders (1 active) Forwarder 1 State is Active 1 state change, last state change 00:18:54 MAC address is 0007.b400.2f01 (default) Owner ID is 0013.6030.5fa1 Redirection enabled Preemption enabled, min delay 30 sec Active is local, weighting 100 --More--   Arp replies sent: 1 Forwarder 2 State is Listen MAC address is 0007.b400.2f02 (learnt) Owner ID is 0013.6030.5fc0 Redirection enabled, 598.838 sec remaining (maximum 600 sec) Time to live: 14398.838 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.135 (primary), weighting 100 (expires in 8.838 sec) R7# RACK18AS>2 [Resuming connection 2 to r2 ... ] R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/2 R2(config-if)#shut R2(config-if)# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3#sh *Mar 2 09:07:36.076: %LINK-3-UPDOWN: Interface Serial1/2, changed state to down R3#sh gl *Mar 2 09:07:36.076: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/2 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 09:07:37.078: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to down R3#sh gl FastEthernet0/0 - Group 47 State is Standby 1 state change, last state change 00:05:06 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 2.527 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 7.267 sec) Standby is local Priority 100 (default) Weighting 0, low (default 100), thresholds: lower 1, upper 100 Track object 2 state Down decrement 100 Track object 3 state Up decrement 100 Load balancing: round-robin There are 2 forwarders (1 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 0013.6030.5fa1 Time to live: 14397.263 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 7.263 sec) --More-- *Mar 2 09:07:37.559: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Speak --More--   R3#sh gl FastEthernet0/0 - Group 47 State is Standby 1 state change, last state change 00:05:09 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 2.636 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 7.376 sec) Standby is local Priority 100 (default) Weighting 0, low (default 100), thresholds: lower 1, upper 100 Track object 2 state Down decrement 100 Track object 3 state Up decrement 100 Load balancing: round-robin There are 2 forwarders (1 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 0013.6030.5fa1 Time to live: 14397.372 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 7.368 sec) --More--   Forwarder 2 State is Active 1 state change, last state change 00:05:18 MAC address is 0007.b400.2f02 (default) Owner ID is 0013.6030.5fc0 Preemption enabled, min delay 30 sec Active is local, weighting 0 R3# R3# R3#sh gl FastEthernet0/0 - Group 47 State is Standby 1 state change, last state change 00:05:37 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.958 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 9.699 sec) Standby is local Priority 100 (default) Weighting 0, low (default 100), thresholds: lower 1, upper 100 Track object 2 state Down decrement 100 Track object 3 state Up decrement 100 Load balancing: round-robin There are 2 forwarders (0 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 0013.6030.5fa1 Time to live: 14399.695 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 9.695 sec) --More-- *Mar 2 09:08:07.648: %GLBP-6-FWDSTATECHANGE: FastEthernet0/0 Grp 47 Fwd 2 state Active -> Listen --More--   Forwarder 2 State is Listen 2 state changes, last state change 00:00:01 MAC address is 0007.b400.2f02 (default) Owner ID is 0013.6030.5fc0 Preemption enabled, min delay 30 sec Active is 180.40.7.131 (secondary), weighting 100 (expires in 8.922 sec) R3# sh gl FastEthernet0/0 - Group 47 State is Standby 1 state change, last state change 00:05:48 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 2.287 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 7.023 sec) Standby is local Priority 100 (default) Weighting 0, low (default 100), thresholds: lower 1, upper 100 Track object 2 state Down decrement 100 Track object 3 state Up decrement 100 Load balancing: round-robin There are 2 forwarders (0 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 0013.6030.5fa1 Time to live: 14397.019 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 7.019 sec) --More--   Forwarder 2 State is Listen 2 state changes, last state change 00:00:14 MAC address is 0007.b400.2f02 (default) Owner ID is 0013.6030.5fc0 Preemption enabled, min delay 30 sec Active is 180.40.7.131 (secondary), weighting 100 (expires in 8.478 sec) R3# RACK18AS>7 [Resuming connection 7 to r7 ... ] *M R7#sh gl R7#sh glbp FastEthernet0/1 - Group 47 State is Active 2 state changes, last state change 00:20:23 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 0.516 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is local Standby is 180.40.7.135, priority 100 (expires in 9.804 sec) Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Track object 1 state Up decrement 100 Load balancing: round-robin There are 2 forwarders (2 active) Forwarder 1 State is Active 1 state change, last state change 00:20:13 MAC address is 0007.b400.2f01 (default) Owner ID is 0013.6030.5fa1 Redirection enabled Preemption enabled, min delay 30 sec Active is local, weighting 100 --More--   Arp replies sent: 1 Forwarder 2 State is Active 1 state change, last state change 00:00:22 MAC address is 0007.b400.2f02 (learnt) Owner ID is 0013.6030.5fc0 Redirection enabled, 577.719 sec remaining (maximum 600 sec) Time to live: 14377.719 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is local, weighting 100 R7# RACK18AS>2 [Resuming connection 2 to r2 ... ] *Mar 2 09:07:32.647: %OSPF-5-ADJCHG: Proces R2(config-if)#no shut R2(config-if)#^Z R2# RACK18AS>3 [Resuming connection 3 to r3 ... ] R3# *Mar 2 09:08:55.795: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up *Mar 2 09:08:56.797: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up R3#sh gl *Mar 2 09:08:58.692: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active R3#sh gl FastEthernet0/0 - Group 47 State is Standby 1 state change, last state change 00:06:28 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.682 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 9.419 sec) Standby is local Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Track object 2 state Up decrement 100 Track object 3 state Up decrement 100 Load balancing: round-robin There are 2 forwarders (0 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 0013.6030.5fa1 Time to live: 14399.419 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 9.415 sec) --More--   Forwarder 2 State is Listen 2 state changes, last state change 00:00:53 MAC address is 0007.b400.2f02 (default) Owner ID is 0013.6030.5fc0 Preemption enabled, min delay 30 sec (25 secs remaining) Active is 180.40.7.131 (secondary), weighting 100 (expires in 8.590 sec) R3# *Mar 2 09:09:05.924: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/2 from LOADING to FULL, Loading Done R3#sh gl FastEthernet0/0 - Group 47 State is Standby 1 state change, last state change 00:06:43 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.786 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 9.523 sec) Standby is local Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Track object 2 state Up decrement 100 Track object 3 state Up decrement 100 Load balancing: round-robin There are 2 forwarders (0 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 0013.6030.5fa1 Time to live: 14399.519 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 9.519 sec) --More--   Forwarder 2 State is Listen 2 state changes, last state change 00:01:07 MAC address is 0007.b400.2f02 (default) Owner ID is 0013.6030.5fc0 Preemption enabled, min delay 30 sec (11 secs remaining) Active is 180.40.7.131 (secondary), weighting 100 (expires in 9.202 sec) R3#sh gl FastEthernet0/0 - Group 47 State is Standby 1 state change, last state change 00:06:50 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.057 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 8.798 sec) Standby is local Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Track object 2 state Up decrement 100 Track object 3 state Up decrement 100 Load balancing: round-robin There are 2 forwarders (0 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 0013.6030.5fa1 Time to live: 14398.794 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 8.790 sec) --More--   Forwarder 2 State is Listen 2 state changes, last state change 00:01:15 MAC address is 0007.b400.2f02 (default) Owner ID is 0013.6030.5fc0 Preemption enabled, min delay 30 sec (2 secs remaining) Active is 180.40.7.131 (secondary), weighting 100 (expires in 9.779 sec) R3# *Mar 2 09:09:26.413: %GLBP-6-FWDSTATECHANGE: FastEthernet0/0 Grp 47 Fwd 2 state Listen -> Active R3#sh run int fa 0/0 Building configuration... Current configuration : 445 bytes ! interface FastEthernet0/0 ip address dhcp ip policy route-map Prob1 duplex auto speed auto vrrp 47 ip 180.40.7.133 vrrp 47 priority 111 glbp 47 ip 180.40.7.134 glbp 47 weighting track 2 decrement 100 glbp 47 weighting track 3 decrement 100 standby 47 ip 180.40.7.132 standby 47 priority 101 standby 47 preempt standby 47 track Serial1/0 standby 47 track Serial1/2 standby 47 track 3 decrement 75 service-policy input test end R3# R3# RACK18AS>7 [Resuming connection 7 to r7 ... ] * R7#sh run int fa 0/1 Building configuration... Current configuration : 298 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 speed auto half-duplex vrrp 47 ip 180.40.7.133 glbp 47 ip 180.40.7.134 glbp 47 weighting track 1 decrement 100 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7# R7#sh run | b track track 1 ip route 20.10.1.0 255.255.255.0 reachability ! ! ! class-map match-all test class-map match-any jpeg match protocol http mime "*.jpg" match protocol http mime "*.jpe" match protocol http mime "*.jpeg" match protocol http url "*.jpg" match protocol http url "*.jpe" match protocol http url "*.jpeg" class-map match-all S5Other match access-group 1 class-map match-all S5Telnet match access-group 1 match protocol telnet ! ! policy-map Prob5 class S5Telnet bandwidth 1000 class jpeg --More--   R7# RACK18AS>6 [Resuming connection 6 to r6 ... ] 1d0 S6#config        sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 14 16 28 32 40 48 56 Dscp-dscp mutation map: Default DSCP Mutation Map: --More--   S6#sh mls qos int gi 01 /1.  qu S6#sh mls qos int gi 0/1 queueing GigabitEthernet0/1 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 Dscp-threshold map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 01 01 01 01 01 01 01 01 01 01 1 : 01 01 01 01 01 01 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 01 01 01 01 01 01 01 01 4 : 01 01 01 01 01 01 01 01 01 01 5 : 01 01 01 01 01 01 01 01 01 01 6 : 01 01 01 01 Cos-queue map: cos-qid 0 - 1 1 - 1 2 - 2 3 - 2 4 - 3 5 - 3 6 - 4 7 - 4 S6#confi gt ^ % Invalid input detected at '^' marker. S6#confi gt ^ % Invalid input detected at '^' marker. S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fg  gi 0/1 S6(config-if)#wrr S6(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id dscp-map Configure dscp-map for a queue threshold queue-limit Configure queue-limit random-detect Configure random-detect threshold Configure queue tail-drop thresholds S6(config-if)#wrr-queue co S6(config-if)#wrr-queue cos-map ? <1-4> enter cos-map queue id S6(config-if)#wrr-queue cos-map 1   2 0 4 5 6 7 S6(config-if)#wrr-queue cos-map 2 0 4 5 6 7           3 3 S6(config-if)#do sh mls qos int gi 0/1 qu GigabitEthernet0/1 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 Dscp-threshold map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 01 01 01 01 01 01 01 01 01 01 1 : 01 01 01 01 01 01 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 01 01 01 01 01 01 01 01 4 : 01 01 01 01 01 01 01 01 01 01 5 : 01 01 01 01 01 01 01 01 01 01 6 : 01 01 01 01 Cos-queue map: cos-qid 0 - 2 1 - 1 2 - 2 3 - 3 4 - 2 5 - 2 6 - 2 7 - 2 S6(config-if)#wrr S6(config-if)#wrr-queue b S6(config-if)#wrr-queue bandwidth ? <1-65536> enter bandwidth weight for qid 1 S6(config-if)#wrr-queue bandwidth 25 50 25 1 S6(config-if)#ds S6(config-if)#ds  ? Interface configuration commands: arp Set arp type (arpa, probe, snap) or timeout auto Configure Automation bandwidth Set bandwidth informational parameter bgp-policy Apply policy propogated by bgp community string carrier-delay Specify delay for interface transitions cdp CDP interface subcommands channel-group Etherchannel/port bundling configuration channel-protocol Select the channel protocol (LACP, PAgP) dampening Enable event dampening default Set a command to its defaults delay Specify interface throughput delay description Interface specific description dot1x Interface Config Commands for 802.1x eou EAPoUDP Interface Configuration Commands exit Exit from interface configuration mode fair-queue Enable Fair Queuing on an Interface flowcontrol Configure flow operation. help Description of the interactive help system hold-queue Set hold queue depth ip Interface Internet Protocol config commands keepalive Enable keepalive --More--   S6(config-if)#wr S6(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id dscp-map Configure dscp-map for a queue threshold queue-limit Configure queue-limit random-detect Configure random-detect threshold Configure queue tail-drop thresholds S6(config-if)#wrr-queue dsc S6(config-if)#wrr-queue dscp-map ? <1-2> enter dscp-map threshold id (1-2) S6(config-if)#wrr-queue dscp-map 2 ? <0-63> DSCP values separated by spaces (up to 8 values total) S6(config-if)#wrr-queue dscp-map 2 10 26 S6(config-if)#wrr-queue dscp-map 2 10 26bandwidth 25 50 25 1do sh mls qos int gi 0/1 qu  GigabitEthernet0/1 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 50 3 - 25 4 - 1 Dscp-threshold map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 01 01 01 01 01 01 01 01 01 01 1 : 02 01 01 01 01 01 01 01 01 01 2 : 01 01 01 01 01 01 02 01 01 01 3 : 01 01 01 01 01 01 01 01 01 01 4 : 01 01 01 01 01 01 01 01 01 01 5 : 01 01 01 01 01 01 01 01 01 01 6 : 01 01 01 01 Cos-queue map: cos-qid 0 - 2 1 - 1 2 - 2 3 - 3 4 - 2 5 - 2 6 - 2 7 - 2 S6(config-if)#wrr S6(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id dscp-map Configure dscp-map for a queue threshold queue-limit Configure queue-limit random-detect Configure random-detect threshold Configure queue tail-drop thresholds S6(config-if)#wrr-queue th S6(config-if)#wrr-queue threshold ? <1-4> enter threshold queue id (1-4) S6(config-if)#wrr-queue threshold 1 ? <1-100> enter percent of queue size for threshold 1 S6(config-if)#wrr-queue threshold 1 40 100 S6(config-if)#~wrr-queue threshold 1 40 100 0 100 60 100  60 100 3 60 100  S6(config-if)#^Z S6#sh run 1d09h: %SYS-5-CONFIG_I: Configured from console by console S6#sh run int gi 0/1 Building configuration... Current configuration : 270 bytes ! interface GigabitEthernet0/1 switchport mode dynamic desirable wrr-queue bandwidth 25 50 25 1 wrr-queue threshold 1 40 100 wrr-queue threshold 3 60 100 wrr-queue cos-map 1 1 wrr-queue cos-map 2 0 2 4 5 6 7 wrr-queue cos-map 3 3 wrr-queue dscp-map 2 10 26 end S6# S6#confi t Enter configuration commands, one per line. End with CNTL/Z. S6(config)# S6(config)#int gi 0/2 S6(config-if)# wrr-queue cos-map 1 1 S6(config-if)# wrr-queue cos-map 2 0 2 4 5 6 7 S6(config-if)# wrr-queue cos-map 3 3 S6(config-if)# wrr-queue bandwidth 25 50 25 1 S6(config-if)# wrr-queue dscp-map 2 10 26 26  26 26  S6(config-if)#wrr ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id dscp-map Configure dscp-map for a queue threshold queue-limit Configure queue-limit random-detect Configure random-detect threshold Configure queue tail-drop thresholds S6(config-if)#wrr   S6(config-if)#wrr-queue d re a S6(config-if)#wrr-queue random-detect ? max-threshold max-thresholds S6(config-if)#wrr-queue random-detect ma S6(config-if)#wrr-queue random-detect max-threshold ? <1-4> enter threshold queue id (1-4) S6(config-if)#wrr-queue random-detect max-threshold 3 ? <1-100> enter percent of queue size for threshold 1 S6(config-if)#wrr-queue random-detect max-threshold 3 40 80 ? S6(config-if)#wrr-queue random-detect max-threshold 3 40 80 S6(config-if)#^Z S6#sh run 1d09h: %SYS-5-CONFIG_I: Configured from console by console S6#sh run int gi 0/2 Building configuration... Current configuration : 254 bytes ! interface GigabitEthernet0/2 switchport mode dynamic desirable wrr-queue bandwidth 25 50 25 1 wrr-queue random-detect max-threshold 3 40 80 wrr-queue cos-map 1 1 wrr-queue cos-map 2 0 2 4 5 6 7 wrr-queue cos-map 3 3 wrr-queue dscp-map 2 26 end S6# S6# RACK18AS>7 [Resuming connection 7 to r7 ... ] R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#do sh class Class Map match-all test (id 4) Match none Class Map match-any jpeg (id 3) Match protocol http mime "*.jpg" Match protocol http mime "*.jpe" Match protocol http mime "*.jpeg" Match protocol http url "*.jpg" Match protocol http url "*.jpe" Match protocol http url "*.jpeg" Class Map match-all S5Other (id 2) Match access-group 1 Class Map match-any class-default (id 0) Match any Class Map match-all S5Telnet (id 1) Match access-group 1 Match protocol telnet R7(config)#  clas R7(config)#class-map telnet R7(config-cmap)#ma R7(config-cmap)#match pro R7(config-cmap)#match protocol telnet R7(config-cmap)#match protocol telnet end R7#co *Mar 1 23:24:44.625: %SYS-5-CONFIG_I: Configured from console by console R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#clas R7(config)#class-map ftp R7(config-cmap)#match pro R7(config-cmap)#match protocol ftp R7(config-cmap)#exit R7(config)#ip nb R7(config)#ip nbar po R7(config)#ip nbar port-map ftp ? tcp TCP ports R7(config)#ip nbar port-map ftp tcp 20 21 R7(config)#pol R7(config)#policy-map Prob20to22 R7(config-pmap)#cla R7(config-pmap)#class ftp R7(config-pmap-c)#ban R7(config-pmap-c)#bandwidth per R7(config-pmap-c)#bandwidth percent 24 5 R7(config-pmap-c)#bandwidth percent 25class ftp    tel R7(config-pmap-c)#class tel % class map tel not configured R7(config-pmap-c)#class telnet R7(config-pmap-c)#class telnet bandwidth percent 25 R7(config-pmap-c)#int f 0/0 R7(config-if)#se R7(config-if)#service-policy ou R7(config-if)#service-policy output Prob20to22 R7(config-if)#^Z R7#sh run *Mar 1 23:27:14.418: %SYS-5-CONFIG_I: Configured from console by console R7#sh run | v b class class-map match-all telnet match protocol telnet class-map match-all test class-map match-any jpeg match protocol http mime "*.jpg" match protocol http mime "*.jpe" match protocol http mime "*.jpeg" match protocol http url "*.jpg" match protocol http url "*.jpe" match protocol http url "*.jpeg" class-map match-all S5Other match access-group 1 class-map match-all S5Telnet match access-group 1 match protocol telnet class-map match-all ftp match protocol ftp ! ! policy-map Prob5 class S5Telnet bandwidth 1000 class jpeg --More--   shape average 1000000 class S5Other police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob20to22 class ftp bandwidth percent 25 class telnet bandwidth percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex service-policy output Prob20to22 ! interface BRI0/0 no ip address --More--   R7#con   sh access-list Standard IP access list 1 10 permit 208.28.1.2 (95 matches) R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#access-list 100 per host 87.23.11123 .123 123 any ^ % Invalid input detected at '^' marker. R7(config)#access-list 100 per host 87.23.11.123 anyihost 87.23.11.123 anyphost 87.23.11.123 any host 87.23.11.123 any R7(config)#access-list 100 per ip host 87.23.11.123 any    ahost 87.23.11.123 nhost 87.23.11.123 yhost 87.23.11.123  host 87.23.11.123  R7(config)#exit R7#co *Mar 1 23:29:28.442: %SYS-5-CONFIG_I: Configured from console by console R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#class R7(config)#class-map sql R7(config)#class-map sql R7(config-cmap)#class-map sqlmsqlasqltsqlcsqlhsql sqlsql -sqlnsqlasqlysql sql ^ % Invalid input detected at '^' marker. R7(config)#class-map match-nay sql sql  sql  sql a sqln sqlt sqly sql ^ % Invalid input detected at '^' marker. R7(config)#class-map match-anty sql\y sqly sql y sql  R7(config-cmap)#ma R7(config-cmap)#match ? access-group Access group any Any packets class-map Class map cos IEEE 802.1Q/ISL class of service/user priority values destination-address Destination address discard-class Discard behavior identifier dscp Match DSCP in IP(v4) and IPv6 packets fr-de Match on Frame-relay DE bit fr-dlci Match on fr-dlci input-interface Select an input interface to match ip IP specific values mpls Multi Protocol Label Switching specific values not Negate this match result packet Layer 3 Packet length precedence Match Precedence in IP(v4) and IPv6 packets protocol Protocol qos-group Qos-group source-address Source address R7(config-cmap)#match pr R7(config-cmap)#match pro R7(config-cmap)#match protocol s? secure-ftp secure-http secure-imap secure-irc secure-ldap secure-nntp secure-pop3 secure-telnet smtp snapshot snmp socks sqlnet sqlserver ssh streamwork stun sunrpc syslog R7(config-cmap)#match protocol s m? % Unrecognized command R7(config-cmap)#match protocol m s R7(config-cmap)#match protocol sq R7(config-cmap)#match protocol sqln R7(config-cmap)#match protocol sqlnet R7(config-cmap)#match protocol sqlnet  match protocol sqlnet      lser R7(config-cmap)#match protocol sqlserver R7(config-cmap)#exit R7(config)#cla R7(config)#class-map Prob21SWL  QL R7(config-cmap)#match acc R7(config-cmap)#match access-group 100 R7(config-cmap)#match ? access-group Access group any Any packets class-map Class map cos IEEE 802.1Q/ISL class of service/user priority values destination-address Destination address discard-class Discard behavior identifier dscp Match DSCP in IP(v4) and IPv6 packets fr-de Match on Frame-relay DE bit fr-dlci Match on fr-dlci input-interface Select an input interface to match ip IP specific values mpls Multi Protocol Label Switching specific values not Negate this match result packet Layer 3 Packet length precedence Match Precedence in IP(v4) and IPv6 packets protocol Protocol qos-group Qos-group source-address Source address R7(config-cmap)#match cla R7(config-cmap)#match class-map sql R7(config-cmap)#en  do sh class Class Map match-all telnet (id 5) Match protocol telnet Class Map match-all test (id 4) Match none Class Map match-any jpeg (id 3) Match protocol http mime "*.jpg" Match protocol http mime "*.jpe" Match protocol http mime "*.jpeg" Match protocol http url "*.jpg" Match protocol http url "*.jpe" Match protocol http url "*.jpeg" Class Map match-all S5Other (id 2) Match access-group 1 Class Map match-any class-default (id 0) Match any Class Map match-all S5Telnet (id 1) Match access-group 1 Match protocol telnet --More--   Class Map match-all ftp (id 6) Match protocol ftp Class Map match-all Prob21SQL (id 8) Match access-group 100 Match class-map sql Class Map match-any sql (id 7) Match protocol sqlnet Match protocol sqlserver R7(config-cmap)#pro   exit R7(config)#pol R7(config)#policy-map Prob20to22 R7(config-pmap)#Prob21SQL cProb21SQL lProb21SQL aProb21SQL sProb21SQL sProb21SQL  Prob21SQL Prob21SQL  R7(config-pmap-c)#pri R7(config-pmap-c)#priority ? <8-2000000> Kilo Bits per second percent % of total bandwidth R7(config-pmap-c)#priority 56 ? <32-2000000> Burst in bytes R7(config-pmap-c)#priority 56 128 R7(config-pmap-c)#end R7#sh *Mar 1 23:33:54.117: %SYS-5-CONFIG_I: Configured from console by console R7#sh pol int f  a 0/0 FastEthernet0/0 Service-policy output: Prob20to22 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp Queueing Output Queue: Conversation 265 Bandwidth 25 (%) Bandwidth 25000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Queueing Output Queue: Conversation 266 Bandwidth 25 (%) Bandwidth 25000 (kbps) Max Threshold 64 (packets) --More--   (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: Prob21SQL (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 100 Match: class-map match-any sql Match: protocol sqlnet 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol sqlserver 0 packets, 0 bytes 5 minute rate 0 bps Queueing Strict Priority Output Queue: Conversation 264 Bandwidth 56 (kbps) Burst 128 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: class-default (match-any) 91 packets, 9186 bytes --More--   5 minute offered rate 0 bps, drop rate 0 bps Match: any R7#sh run | b class class-map match-all telnet match protocol telnet class-map match-all test class-map match-any jpeg match protocol http mime "*.jpg" match protocol http mime "*.jpe" match protocol http mime "*.jpeg" match protocol http url "*.jpg" match protocol http url "*.jpe" match protocol http url "*.jpeg" class-map match-all S5Other match access-group 1 class-map match-all S5Telnet match access-group 1 match protocol telnet class-map match-all ftp match protocol ftp class-map match-any sql match protocol sqlnet match protocol sqlserver class-map match-all Prob21SQL match access-group 100 match class-map sql --More--  ! ! policy-map Prob5 class S5Telnet bandwidth 1000 class jpeg shape average 1000000 class S5Other police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob20to22 class ftp bandwidth percent 25 class telnet bandwidth percent 25 class Prob21SQL priority 56 128 ! ! ! ! ! ! --More--   R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#endpriority 56 128class Prob21SQL policy-map Prob20to22 R7(config-pmap)#class class-de R7(config-pmap)#class class-defualt % class map class-defualt not configured R7(config-pmap)#class class-defualtlt lt altult R7(config-pmap-c)#fa R7(config-pmap-c)#fair-queue R7(config-pmap-c)#do sh pol int fa 0/0 FastEthernet0/0 Service-policy output: Prob20to22 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp Queueing Output Queue: Conversation 265 Bandwidth 25 (%) Bandwidth 25000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Queueing Output Queue: Conversation 266 Bandwidth 25 (%) Bandwidth 25000 (kbps) Max Threshold 64 (packets) --More--   (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: Prob21SQL (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 100 Match: class-map match-any sql Match: protocol sqlnet 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol sqlserver 0 packets, 0 bytes 5 minute rate 0 bps Queueing Strict Priority Output Queue: Conversation 264 Bandwidth 56 (kbps) Burst 128 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: class-default (match-any) 126 packets, 12514 bytes --More--   5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 256 (total queued/total drops/no-buffer drops) 0/0/0 R7(config-pmap-c)# do sh pol int fa 0/0fair-queue ? <16-4096> Number Dynamic Conversation Queues R7(config-pmap-c)#fair-queue 512 R7(config-pmap-c)#fair-queue 512do sh pol int fa 0/0 FastEthernet0/0 Service-policy output: Prob20to22 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp Queueing Output Queue: Conversation 521 Bandwidth 25 (%) Bandwidth 25000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Queueing Output Queue: Conversation 522 Bandwidth 25 (%) Bandwidth 25000 (kbps) Max Threshold 64 (packets) --More--   (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: Prob21SQL (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 100 Match: class-map match-any sql Match: protocol sqlnet 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol sqlserver 0 packets, 0 bytes 5 minute rate 0 bps Queueing Strict Priority Output Queue: Conversation 520 Bandwidth 56 (kbps) Burst 128 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: class-default (match-any) 131 packets, 13205 bytes --More--   5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 512 (total queued/total drops/no-buffer drops) 0/0/0 R7(config-pmap-c)#q ^Z R7#sh run *Mar 1 23:37:08.913: %SYS-5-CONFIG_I: Configured from console by console R7#sh run | b class-default class class-default fair-queue 512 ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex service-policy output Prob20to22 ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 speed auto half-duplex --More--   R7#