=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2006.08.23 11:17:01 =~=~=~=~=~=~=~=~=~=~=~= R7# R7# R7# RACK12AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 100 packets, 11400 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   R3# RACK12AS>6 [Resuming connection 6 to r6 ... ] S6#confi     sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 Dscp-dscp mutation map: Default DSCP Mutation Map: --More--   S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#mls qos map ? cos-dscp Map COS to DSCP dscp-cos Map DSCP to COS dscp-mutation Configure dscp-mutation map dscp-switch-priority Map DSCP to switch priority ip-prec-dscp DSCP values for IP precedences 0-7 policed-dscp Map DSCP to policed DSCP S6(config)#mls qos map ip-prec-dscp ? <0-63> 8 dscp values separated by spaces S6(config)#mls qos map ip-prec-dscp 0 14 16 28 32 40 3 48 56 S6(config)#mls qos QoS: ensure flow-control on all interfaces are OFF for proper operation. S6(config)#int fa 0/7 S6(config-if)#mls qos ? cos Configure interface COS parameters dscp-mutation Apply DSCP-DSCP map to DSCP trusted port monitor Collect QoS statistics trust Configure trust state of interface S6(config-if)#mls qos tr S6(config-if)#mls qos trust ? cos Classify by packet COS device trusted device class dscp Classify by packet DSCP ip-precedence Classify by packet IP precedence S6(config-if)#mls qos trust ip S6(config-if)#mls qos trust ip-precedence S6(config-if)# RACK12AS>5 [Resuming connection 5 to r5 ... ] S5#en p 180.40.7.129 re 10000 Type escape sequence to abort. Sending 10000, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!! RACK12AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 100 packets, 11400 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 1372 packets, 156408 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 100 packets, 11400 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 10000 packets, 1140000 bytes 5 minute offered rate 30000 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   R3# RACK12AS>6 [Resuming connection 6 to r6 ... ] S6(config-if)#^Z S6#sh ru 19:48:30: %SYS-5-CONFIG_I: Configured from console by console S6#sh ru  b n | n b mls mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 no switchport ip address 20.10.2.1 255.255.255.0 ! interface FastEthernet0/2 --More--   no switchport ip address 20.10.1.2 255.255.255.0 ! interface FastEthernet0/3 switchport mode dynamic desirable ! interface FastEthernet0/4 switchport access vlan 10 switchport mode dynamic desirable ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport mode dynamic desirable ! interface FastEthernet0/7 switchport access vlan 10 switchport mode dynamic desirable mls qos trust ip-precedence ! interface FastEthernet0/8 switchport mode dynamic desirable --More--   S6# RACK12AS>5 [Resuming connection 5 to r5 ... ] !!!!!!!!!!! S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#mlw qos ^ % Invalid input detected at '^' marker. S5(config)#mlw qos qos s qos QoS: ensure flow-control on all interfaces are OFF for proper operation. S5(config)#int fa0/24 S5(config-if)#mls qwo  os tru S5(config-if)#mls qos trust dsc S5(config-if)#mls qos trust dscp S5(config-if)#exit S5(config)#mls qos mu S5(config)#mls qos mu  S5(config)#mls qos map m S5(config)#mls qos map mu S5(config)#mls qos map mu    ? cos-dscp Map COS to DSCP dscp-cos Map DSCP to COS dscp-mutation Configure dscp-mutation map dscp-switch-priority Map DSCP to switch priority ip-prec-dscp DSCP values for IP precedences 0-7 policed-dscp Map DSCP to policed DSCP S5(config)#mls qos map dsc S5(config)#mls qos map dscp-m S5(config)#mls qos map dscp-mutation ? WORD DSCP mutation map name S5(config)#mls qos map dscp-mutation Prob9 ? <0-63> DSCP values separated by spaces (up to 8 values total) S5(config)#mls qos map dscp-mutation Prob9 14 ? <0-63> DSCP values separated by spaces (up to 8 values total) to Specify egress DSCPs S5(config)#mls qos map dscp-mutation Prob9 14 to ? <0-63> dscp value S5(config)#mls qos map dscp-mutation Prob9 14 to 12 S5(config)#mls qos map dscp-mutation Prob9 14 to 12        28 to 26 S5(config)#int fa 0/24 S5(config-if)#mls wos   q S5(config-if)#mls qos os   ? cos Configure interface COS parameters dscp-mutation Apply DSCP-DSCP map to DSCP trusted port monitor Collect QoS statistics trust Configure trust state of interface S5(config-if)#mls qos dsc S5(config-if)#mls qos dscp-mutation ? WORD dscp-mutation name S5(config-if)#mls qos dscp-mutation Prob9 ? S5(config-if)#mls qos dscp-mutation Prob9   S5(config-if)#^Z S5#sh run | 19:52:27: %SYS-5-CONFIG_I: Configured from console by console S5#sh run | b 0/12 interface FastEthernet0/12 switchport mode dynamic desirable ! interface FastEthernet0/13 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/14 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/15 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/16 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/17 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! --More--  interface FastEthernet0/18 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/19 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/20 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/21 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/22 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/23 switchport mode dynamic desirable mls qos dscp-mutation Prob9 --More--  ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk mls qos trust dscp mls qos dscp-mutation Prob9 ! interface GigabitEthernet0/1 switchport mode dynamic desirable ! interface GigabitEthernet0/2 switchport mode dynamic desirable ! interface Vlan1 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ip http server --More--   S5# S5#qsh run | b 0/12config t p 180.40.7.129 re 10000 Type escape sequence to abort. Sending 10000, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! RACK12AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 100 packets, 11400 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 1162 packets, 132468 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 10000 packets, 1140000 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   Class-map: class-default (match-any) 11753 packets, 1148050 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 100 packets, 11400 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 5000 packets, 570000 bytes 5 minute offered rate 12000 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 10000 packets, 1140000 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   R3#[Ash pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 100 packets, 11400 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 6845 packets, 780330 bytes 5 minute offered rate 12000 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 10000 packets, 1140000 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   R3#[A % Unknown command or computer name, or unable to find computer address R3#[A % Unknown command or computer name, or unable to find computer address R3#[Ash pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 100 packets, 11400 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 9219 packets, 1050966 bytes 5 minute offered rate 28000 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 10000 packets, 1140000 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More-- RACK12AS>5 [Resuming connection 5 to r5 ... ] !!!!!!!! S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int fa 0/24 S5(config-if)#mls qos tr S5(config-if)#mls qos trust co S5(config-if)#mls qos trust cos d S5(config-if)#mls qos trust cos d? % Unrecognized command S5(config-if)#mls qos trust cos d ? pass-through cos pass-through mode S5(config-if)#mls qos trust cos pa S5(config-if)#mls qos trust cos pass-through ? dscp transmit without dscp modification S5(config-if)#mls qos trust cos pass-through ? dscp transmit without dscp modification S5(config-if)#mls qos trust cos pass-through ds S5(config-if)#mls qos trust cos pass-through dscp ? S5(config-if)#mls qos trust cos pass-through dscp S5(config-if)#^Z S5#config tp 180.40.7.129 re 10000 19:56:43: %SYS-5-CONFIG_I: Configured from console by console S5#p 180.40.7.129 re 10000 Type escape sequence to abort. Sending 10000, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! RACK12AS>3 [Resuming connection 3 to r3 ... ]   --More--   R3#[Ash pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 100 packets, 11400 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 11554 packets, 1317156 bytes 5 minute offered rate 32000 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 10000 packets, 1140000 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   Class-map: class-default (match-any) 11764 packets, 1149128 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 100 packets, 11400 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 14460 packets, 1648440 bytes 5 minute offered rate 40000 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 10000 packets, 1140000 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   R3# RACK12AS>5 [Resuming connection 5 to r5 ... ] !!!!!!!!!! S5#sh run int fa 0/24 Building configuration... Current configuration : 161 bytes ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk mls qos trust cos pass-through dscp mls qos dscp-mutation Prob9 end S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int fa 0/24 S5(config-if)#mls wos tru ds S5(config-if)#mls wos tru ds ^ % Invalid input detected at '^' marker. S5(config-if)#mls wos tru dsos tru ds qos tru ds S5(config-if)#^Z S5#sh ru 19:59:16: %SYS-5-CONFIG_I: Configured from console by console S5#sh run | b mls mls qos map dscp-mutation Prob9 14 to 12 mls qos map dscp-mutation Prob9 28 to 26 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 switchport mode dynamic desirable ! interface FastEthernet0/2 --More--   switchport mode dynamic desirable ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable ! interface FastEthernet0/4 switchport mode dynamic desirable ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport mode dynamic desirable ! interface FastEthernet0/7 no switchport ip address 208.28.1.2 255.255.255.0 ! interface FastEthernet0/8 switchport mode dynamic desirable ! interface FastEthernet0/9 --More--   switchport mode dynamic desirable ! interface FastEthernet0/10 switchport mode dynamic desirable ! interface FastEthernet0/11 switchport mode dynamic desirable ! interface FastEthernet0/12 switchport mode dynamic desirable ! interface FastEthernet0/13 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/14 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/15 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! --More--  interface FastEthernet0/16 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/17 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/18 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/19 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/20 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/21 switchport mode dynamic desirable mls qos dscp-mutation Prob9 --More--  ! interface FastEthernet0/22 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/23 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk mls qos trust dscp mls qos dscp-mutation Prob9 ! interface GigabitEthernet0/1 switchport mode dynamic desirable ! interface GigabitEthernet0/2 switchport mode dynamic desirable ! interface Vlan1 no ip address --More--   S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#^Z S5# 20:02:10: %SYS-5-CONFIG_I: Configured from console by console S5# RACK12AS>4 [Resuming connection 4 to r4 ... ] R4#^x   RACK12AS>6 [Resuming connection 6 to r6 ... ] S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#^Z S6# RACK12AS>5 [Resuming connection 5 to r5 ... ] S5#configt Translating "configt" % Unknown command or computer name, or unable to find computer address S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#class     access-list           do sh access-list S5(config)#access-list 1 per 180.40.7.130 S5(config)#access-list 1 per 180.40.7.130           00.1.1.1 S5(config)#class S5(config)#class-map R4 S5(config-cmap)#match ac S5(config-cmap)#match access-group 1 S5(config-cmap)#exit S5(config)#pol S5(config)#policy-map S5(config)#policy-map Prob10 S5(config-pmap)#m class R4 S5(config-pmap-c)#set cos 4 S5(config-pmap-c)#int fa 0/24 S5(config-if)#ser S5(config-if)#service-policy in S5(config-if)#service-policy input Prob10 S5(config-if)#^Z S5# RACK12AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol R3#sh policy-map Policy Map test Class dscp24 Class dscp26 Class dscp28 Class prec3 Policy Map Prob7 Class telnet Bandwidth 24 (%) Max Threshold 64 (packets) Class ftp Bandwidth 51 (%) Max Threshold 64 (packets) Class class-default Bandwidth 25 (%) Max Threshold 64 (packets) R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#class R3(config)#class-map COS4 R3(config-cmap)#match co R3(config-cmap)#match cos 4 R3(config-cmap)#pol R3(config-cmap)#pol   exit R3(config)#pol R3(config)#policy-map test R3(config-pmap)#class R3(config-pmap)#class COS4 'match cos' supported only with IEEE 802.1Q/ISL interfaces R3(config-pmap)#exit R3(config)#no class    R3(config)#no class-map COS4 R3(config)#^Z R3# RACK12AS>5 [Resuming connection 5 to r5 ... ] 20:0 S5#sh o pol int fa 0/24 % Ambiguous command: "sh pol int fa 0/24" S5#sh pol int fa 0/24 fa 0/24             S5#sh policy-map S5#sh policy-map int fa 0/24 FastEthernet0/24 Service-policy input: Prob10 Class-map: R4 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 1 Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any 0 packets, 0 bytes 5 minute rate 0 bps S5# RACK12AS>4 [Resuming connection 4 to r4 ... ] R4#pin 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms R4# RACK12AS>5 [Resuming connection 5 to r5 ... ] S5#sh policy-map int fa 0/24 FastEthernet0/24 Service-policy input: Prob10 Class-map: R4 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 1 Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any 0 packets, 0 bytes 5 minute rate 0 bps S5#sh policy-map int fa 0/24 sh policy-map int fa 0/24 ^x4 % Unknown command or computer name, or unable to find computer address S5# RACK12AS>4 [Resuming connection 4 to r4 ... ] R4#pin 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms R4#pin 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms R4#pin 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms R4#pin 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms R4#pin 180.40.7.129 RACK12AS>5 [Resuming connection 5 to r5 ... ] S5#^x4sh policy-map int fa 0/24 FastEthernet0/24 Service-policy input: Prob10 Class-map: R4 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group 1 Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any 0 packets, 0 bytes 5 minute rate 0 bps S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#no class S5(config)#no class-map R4 Class-map R4 is being used S5(config)#no pol S5(config)#no policy-maP  S5(config)#no policy-map S5(config)#no policy-map Prob10 S5(config)#no cpolicy-map Prob10class-map R4  S5(config)#^Z S5# 20:08:27: %SYS-5-CONFIG_I: Configured from console by console S5# RACK12AS>6 [Resuming connection 6 to r6 ... ] 2 S6#confi gt ^ % Invalid input detected at '^' marker. S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 0/4 S6(config-if)#mls qos ? cos Configure interface COS parameters dscp-mutation Apply DSCP-DSCP map to DSCP trusted port monitor Collect QoS statistics trust Configure trust state of interface S6(config-if)#mls qos co S6(config-if)#mls qos cos ? <0-7> Class of service value between 0 and 7 override Force default COS on all packets S6(config-if)#mls qos cos   4 S6(config-if)#do sh mls wqo   qod   s map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 14 16 28 32 40 48 56 Dscp-dscp mutation map: Default DSCP Mutation Map: --More--   S6(config-if)# RACK12AS>3 [Resuming connection 3 to r3 ... ] *M R3#sh config tsh policy-map  int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp24 (match-all) 100 packets, 11400 bytes 5 minute offered rate 0 bps Match: dscp cs3 (24) Class-map: dscp26 (match-all) 20000 packets, 2280000 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 10000 packets, 1140000 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 --More--   Class-map: class-default (match-any) 11976 packets, 1170176 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#configt Translating "configt" Translating "configt" % Unknown command or computer name, or unable to find computer address R3#configt    t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#^Z R3# *Mar 1 20:09:14.367: %SYS-5-CONFIG_I: Configured from console by console R3# RACK12AS>6 [Resuming connection 6 to r6 ... ] S6(config-if)#do sh mls qos mapmls qos cos 4 do sh mls qos map ^Z S6# RACK12AS>5 [Resuming connection 5 to r5 ... ] S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int fa 0/24 S5(config-if)#mls qosint fa 0/24mls qos int fa 0/24no class-map R4policy-map Prob10class-map R4 service-policy input Prob10int fa 0/24 set cos 4 class R4 policy-map Prob10exit policy-map Prob10class R4 set cos 4int fa 0/24service-policy input Prob10no class-map R4 policy-map Prob10class-map R4 int fa 0/24 mls qos  tr S5(config-if)#mls qos trust co S5(config-if)#mls qos trust cos p S5(config-if)#mls qos trust cos pass-through d S5(config-if)#mls qos trust cos pass-through dscp S5(config-if)#^Z S5# 20:22:47: %SYS-5-CONFIG_I: Configured from console by console S5#sh mls qos map S5#sh mls qos maps Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 Dscp-dscp mutation map: Prob9: --More--   S5#configt Translating "configt" % Unknown command or computer name, or unable to find computer address S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#mls qos map >? % Unrecognized command S5(config)#mls qos map > ? cos-dscp Map COS to DSCP dscp-cos Map DSCP to COS dscp-mutation Configure dscp-mutation map dscp-switch-priority Map DSCP to switch priority ip-prec-dscp DSCP values for IP precedences 0-7 policed-dscp Map DSCP to policed DSCP S5(config)#mls qos map dsc S5(config)#mls qos map dscp-c S5(config)#mls qos map dscp-cos ? <0-63> DSCP values separated by spaces (up to 8 values total) S5(config)#mls qos map dscp-cos 9 8 9 10 11 13 141  15 ? <0-63> DSCP values separated by spaces (up to 8 values total) to Specify COS S5(config)#mls qos map dscp-cos 8 9 10 11 13 14 15 TO 2 S5(config)#mls qos map ds S5(config)#mls qos map dscp-c S5(config)#mls qos map dscp-cos 24 25 17  27 28 29 30 31 to 2 S5(config)#m,  mls qos map d S5(config)#mls qos map dscp-c S5(config)#mls qos map dscp-cos 33 24 2    34 35 36 37 38 39 to 2 S5(config)#do sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 02 02 1 : 02 02 01 02 02 02 02 02 02 02 2 : 02 02 02 02 02 02 03 02 02 02 3 : 02 02 04 02 02 02 02 02 02 02 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   S5(config)#int fa 0/3 S5(config-if)#wwr  rr S5(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id min-reserve Configure min-reserve level S5(config-if)#wrr-queue co S5(config-if)#wrr-queue cos-map ? <1-4> enter cos-map queue id S5(config-if)#wrr-queue cos-map ? <1-4> enter cos-map queue id S5(config-if)#wrr-queue cos-map 3 ? <0-7> CoS values separated by spaces (up to 8 values total) S5(config-if)#wrr-queue cos-map 3 0 2 S5(config-if)#wrr-queue cos-map 3 0 2 6 7 S5(config-if)#wrr-queue cos-map 3 0 2 6 7         4 4 S5(config-if)#do    ^Z S5#sh 20:32:25: %SYS-5-CONFIG_I: Configured from console by console S5#sh mls qos int fa 0.3    /3 qu S5#sh mls qos int fa 0/3 queueing FastEthernet0/3 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 Cos-queue map: cos-qid 0 - 3 1 - 1 2 - 3 3 - 2 4 - 4 5 - 3 6 - 3 7 - 3 S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int fa 0/3 S5(config-if)#qrr S5(config-if)#qrr   wrr S5(config-if)#wrr-queue           pri S5(config-if)#priority-queue ou S5(config-if)#priority-queue out S5(config-if)#wrr S5(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id min-reserve Configure min-reserve level S5(config-if)#wrr-queue b S5(config-if)#wrr-queue bandwidth ? <1-65536> enter bandwidth weight for qid 1 S5(config-if)#wrr-queue bandwidth 30 30 40 1 S5(config-if)#^Z S5# 20:34:14: %SYS-5-CONFIG_I: Configured from console by console S5#sh run | b mls mls qos map dscp-mutation Prob9 14 to 12 mls qos map dscp-mutation Prob9 28 to 26 mls qos map dscp-cos 8 9 10 11 13 14 15 24 to 2 mls qos map dscp-cos 25 27 28 29 30 31 33 34 to 2 mls qos map dscp-cos 35 36 37 38 39 to 2 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 --More--   switchport mode dynamic desirable ! interface FastEthernet0/2 switchport mode dynamic desirable ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable wrr-queue bandwidth 30 30 40 1 wrr-queue cos-map 1 1 wrr-queue cos-map 2 3 wrr-queue cos-map 3 0 2 5 6 7 wrr-queue cos-map 4 4 priority-queue out ! interface FastEthernet0/4 switchport mode dynamic desirable ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport mode dynamic desirable --More--   S5#sh run int fa 0/24 Building configuration... Current configuration : 161 bytes ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk mls qos trust cos pass-through dscp mls qos dscp-mutation Prob9 end S5# S5# RACK12AS>6 [Resuming connection 6 to r6 ... ] 20:2 S6#sh run int fa 0; /4 Building configuration... Current configuration : 110 bytes ! interface FastEthernet0/4 switchport access vlan 10 switchport mode dynamic desirable mls qos cos 4 end S6# S6#^x   RACK12AS>1 [Resuming connection 1 to r1 ... ] R1# RACK12AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)# R3(config)#do sh run | b class class-map match-all dscp26 match dscp af31 class-map match-all dscp24 match dscp cs3 class-map match-all telnet match protocol telnet class-map match-all dscp28 match dscp af32 class-map match-all prec3 match ip precedence 3 class-map match-all ftp match protocol ftp ! ! policy-map test class dscp24 class dscp26 class dscp28 class prec3 policy-map Prob7 class telnet bandwidth percent 24 class ftp --More--   R3(config)#class R3(config)#class-map AF12 R3(config-cmap)#match dsc R3(config-cmap)#match dscp af12 R3(config-cmap)#exit R3(config)#pol R3(config)#policy-map Prob11 R3(config-pmap)#class AF12 R3(config-pmap-c)#pri R3(config-pmap-c)#priority pe R3(config-pmap-c)#priority percent 25 R3(config-pmap-c)#priority percent 25 ? <32-2000000> Burst in bytes R3(config-pmap-c)#priority percent 25                     int s 1/2 R3(config-if)#ser   do sh run | b     int s 1/2 Building configuration... Current configuration : 123 bytes ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 max-reserved-bandwidth 100 service-policy output Prob7 end R3(config-if)#s no service-policy output Prob7 R3(config-if)#serv R3(config-if)#service-policy ou R3(config-if)#service-policy output Prob111 % policy map Prob111 not configured R3(config-if)#service-policy output Prob111  R3(config-if)#^Z R3#sh *Mar 2 01:30:48.884: %SYS-5-CONFIG_I: Configured from console by console R3#sh run | b class class-map match-all dscp26 match dscp af31 class-map match-all dscp24 match dscp cs3 class-map match-all telnet match protocol telnet class-map match-all AF12 match dscp af12 class-map match-all dscp28 match dscp af32 class-map match-all prec3 match ip precedence 3 class-map match-all ftp match protocol ftp ! ! policy-map test class dscp24 class dscp26 class dscp28 class prec3 policy-map Prob7 class telnet --More--   bandwidth percent 24 class ftp bandwidth percent 51 class class-default bandwidth percent 25 policy-map Prob11 class AF12 priority percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto service-policy input test ! interface BRI0/0 no ip address --More--   shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network broadcast frame-relay map ip 180.40.7.65 307 broadcast tcp header-compression connections 20 frame-relay map ip 180.40.7.67 302 broadcast ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 max-reserved-bandwidth 100 --More--   service-policy output Prob11 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 --More--   R3#configt Translating "configt" Translating "configt" % Unknown command or computer name, or unable to find computer address R3#conf git   t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#st R3(config-if)#standby ? <0-255> group number authentication Authentication delay HSRP initialisation delay ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level redirects Configure sending of ICMP Redirect messages with an HSRP virtual IP address as the gateway IP address timers Hello and hold timers track Priority tracking use-bia HSRP uses interface's burned in address R3(config-if)#standby 47 ? authentication Authentication ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level timers Hello and hold timers track Priority tracking R3(config-if)#standby 47 ip  R3(config-if)#standby 47 ip ad R3(config-if)#standby 47 ip ad  180.40.7.132 R3(config-if)#stanf  R3(config-if)#standby 47 pre R3(config-if)#standby 47 preempt R3(config-if)#sh t R3(config-if)#standby 47 pri R3(config-if)#standby 47 priority 150 R3(config-if)#stn R3(config-if)#stn  R3(config-if)#standby 47 tra R3(config-if)#standby 47 track ? <1-500> Tracked object number Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-TokenRing Virtual TokenRing R3(config-if)#standby 47 track s 1/0 R3(config-if)# *Mar 2 01:38:17.848: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active R3(config-if)#standby 47 track s 1/0priority 150track s 1/0  51 R3(config-if)#standby 47 track s 1/0 51 51 2 51 R3(config-if)#^Z R3#^x7 % Unknown command or computer name, or unable to find computer address R3# R3# *Mar 2 01:38:48.995: %SYS-5-CONFIG_I: Configured from console by console R3#x  RACK12AS>7 [Resuming connection 7 to r7 ... ] R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/1 R7(config-if)#i a st R7(config-if)#standby 47 ip 180.40.7.132 R7(config-if)#standby 47 ip 180.40.7.132\ \                pree R7(config-if)#^Z R7# *Mar 1 21:37:45.910: %SYS-5-CONFIG_I: Configured from console by console R7#sh stand FastEthernet0/1 - Group 47 State is Standby 1 state change, last state change 00:00:24 Virtual IP address is 180.40.7.132 Active virtual MAC address is 0000.0c07.ac2f Local virtual MAC address is 0000.0c07.ac2f (default) Hello time 3 sec, hold time 10 sec Next hello sent in 2.567 secs Preemption enabled Active router is 180.40.7.129, priority 150 (expires in 8.113 sec) Standby router is local Priority 100 (default 100) IP redundancy name is "hsrp-Fa0/1-47" (default) R7# RACK12AS>3 [Resuming connection 3 to r3 ... ] R3#confi gt ^ % Invalid input detected at '^' marker. R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#z ^Z R3# RACK12AS>2 [Resuming connection 2 to r2 ... ] R2# RACK12AS>3 [Resuming connection 3 to r3 ... ] *Ma R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#staa R3(config-if)#staa46    R3(config-if)#standby 47 ? authentication Authentication ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level timers Hello and hold timers track Priority tracking R3(config-if)#standby 47 ma R3(config-if)#standby 47 mac-address ? H.H.H MAC address R3(config-if)#standby 47 mac-address             ip ? A.B.C.D Virtual IP address R3(config-if)#standby 47 ip 180.40.7.132 ? secondary Make this IP address a secondary virtual IP address R3(config-if)#standby 47 ip 180.40.7.132 s ? R3(config-if)#standby 47 ip 180.40.7.132 s                              ^Z R3# *Mar 2 01:42:26.997: %SYS-5-CONFIG_I: Configured from console by console R3#config Configuring from terminal, memory, or network [terminal]? Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#stan R3(config-if)#standby ? <0-255> group number authentication Authentication delay HSRP initialisation delay ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level redirects Configure sending of ICMP Redirect messages with an HSRP virtual IP address as the gateway IP address timers Hello and hold timers track Priority tracking use-bia HSRP uses interface's burned in address R3(config-if)#standby us R3(config-if)#standby use-bia ? scope Specify the scope of use-bia R3(config-if)#standby use-bia                 ^Z R3# *Mar 2 01:43:06.726: %SYS-5-CONFIG_I: Configured from console by console R3# RACK12AS>2 [Resuming connection 2 to r2 ... ] R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/2 R2(config-if)#shut R2(config-if)# RACK12AS>3 [Resuming connection 3 to r3 ... ] R3# *Mar 2 01:43:17.944: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Speak *Mar 2 01:43:18.045: %LINK-3-UPDOWN: Interface Serial1/2, changed state to down R3# *Mar 2 01:43:18.045: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/2 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 01:43:19.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to down R3#sh stand brie P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/0 47 99 P Standby 180.40.7.131 local 180.40.7.132 R3# RACK12AS>7 [Resuming connection 7 to r7 ... ] *Ma R7#sh stand bre ^ % Invalid input detected at '^' marker. R7#sh stand bre  P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/1 47 100 P Active local 180.40.7.129 180.40.7.132 R7# RACK12AS>2 [Resuming connection 2 to r2 ... ] *Ma R2(config-if)#no shut R2(config-if)#^Z R2# RACK12AS>3 [Resuming connection 3 to r3 ... ] R3#sh *Mar 2 01:43:56.115: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up *Mar 2 01:43:56.960: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active R3#sh run *Mar 2 01:43:57.117: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up R3#sh run | b     u int fa 0/0 Building configuration... Current configuration : 288 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto standby 47 ip 180.40.7.132 standby 47 priority 150 standby 47 preempt standby 47 track Serial1/0 51 standby 47 track Serial1/2 51 service-policy input test end R3# RACK12AS>7 [Resuming connection 7 to r7 ... ] *Ma R7#sh run int fa 0/1 Building configuration... Current configuration : 176 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 speed auto half-duplex standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7# R7# RACK12AS>3 [Resuming connection 3 to r3 ... ] *Mar R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#track R3(config)#track ? <1-500> Tracked object resolution Tracking resolution parameters timer Polling interval timers R3(config)#track 1 ? interface Select an interface to track ip IP protocol R3(config)#track 1 ip ? route IP route R3(config)#track 1 ip rou ? A.B.C.D {/nn || A.B.C.D} Prefix and mask R3(config)#track 1 ip rou 20.10.1.0/.0/ 2.0/.0/24 ? metric Route metric reachability Route reachability state R3(config)#track 1 ip rou 20.10.2.0/24 re R3(config)#track 1 ip rou 20.10.2.0/24 reachability ? R3(config)#track 1 ip rou 20.10.2.0/24 reachability % Cannot change object created via HSRP R3(config)#track 1 ip rou 20.10.2.0/24 reachability  ip rou 20.10.2.0/24 reachability 3 ip rou 20.10.2.0/24 reachability  R3(config-track)#int f a0/    0/0 R3(config-if)#tack R3(config-if)#tack    sta R3(config-if)#standby 47 tr R3(config-if)#standby 47 track 3 ? decrement Priority decrement R3(config-if)#standby 47 track 3 de R3(config-if)#standby 47 track 3 decrement ? <1-255> Decrement value R3(config-if)#standby 47 track 3 decrement 55 R3(config-if)#^Z R3# *Mar 2 01:47:49.413: %SYS-5-CONFIG_I: Configured from console by console R3#^x6 % Unknown command or computer name, or unable to find computer address R3# R3# RACK12AS>6 [Resuming connection 6 to r6 ... ] S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 0/1 S6(config-if)#shut S6(config-if)# RACK12AS>3 [Resuming connection 3 to r3 ... ] R3#sh ip *Mar 2 01:48:18.044: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Speak R3#sh ip       sh stan bri P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/0 47 95 P Standby 180.40.7.131 local 180.40.7.132 R3#^x6 % Unknown command or computer name, or unable to find computer address R3#x  RACK12AS>6 [Resuming connection 6 to r6 ... ] 1 S6(config-if)# S6(config-if)#n oshut      o shut S6(config-if)#^Z S6# 1d01h: %SYS-5-CONFIG_I: Configured from console by console S6# RACK12AS>3 [Resuming connection 3 to r3 ... ] R3#confi gt ^ % Invalid input detected at '^' marker. R3#config         *Mar 2 01:50:03.080: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active R3#sh run | b track track 3 ip route 20.10.2.0 255.255.255.0 reachability ! ! ! class-map match-all dscp26 match dscp af31 class-map match-all dscp24 match dscp cs3 class-map match-all telnet match protocol telnet class-map match-all AF12 match dscp af12 class-map match-all dscp28 match dscp af32 class-map match-all prec3 match ip precedence 3 class-map match-all ftp match protocol ftp ! ! policy-map test class dscp24 class dscp26 --More--   class dscp28 class prec3 policy-map Prob7 class telnet bandwidth percent 24 class ftp bandwidth percent 51 class class-default bandwidth percent 25 policy-map Prob11 class AF12 priority percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto --More--   standby 47 ip 180.40.7.132 standby 47 priority 150 standby 47 preempt standby 47 track Serial1/0 51 standby 47 track Serial1/2 51 standby 47 track 3 decrement 55 service-policy input test ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network broadcast frame-relay map ip 180.40.7.65 307 broadcast tcp header-compression connections 20 --More--   R3#coo nfig t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/90 ^ % Invalid input detected at '^' marker. R3(config)#int fa 0/90  0 R3(config-if)#vr R3(config-if)#vrrp ? <1-255> Group number R3(config-if)#vrrp 55 ? authentication Authentication string description Group specific description ip Enable Virtual Router Redundancy Protocol (VRRP) for IP preempt Enable preemption of lower priority Master priority Priority of this VRRP group timers Set the VRRP timers R3(config-if)#vrrp 55 ip 180  .40.7.133 R3(config-if)# *Mar 2 01:52:09.311: %VRRP-6-STATECHANGE: Fa0/0 Grp 55 state Init -> Backup R3(config-if)#vrr R3(config-if)#vrrp 5 *Mar 2 01:52:12.921: %VRRP-6-STATECHANGE: Fa0/0 Grp 55 state Backup -> Master R3(config-if)#vrrp 55 ? authentication Authentication string description Group specific description ip Enable Virtual Router Redundancy Protocol (VRRP) for IP preempt Enable preemption of lower priority Master priority Priority of this VRRP group timers Set the VRRP timers R3(config-if)#vrrp 55 pri R3(config-if)#vrrp 55 priority 101 R3(config-if)#do sh vrrp FastEthernet0/0 - Group 55 State is Master Virtual IP address is 180.40.7.133 Virtual MAC address is 0000.5e00.0137 Advertisement interval is 1.000 sec Preemption enabled Priority is 101 Master Router is 180.40.7.129 (local), priority is 101 Master Advertisement interval is 1.000 sec Master Down interval is 3.605 sec R3(config-if)#^Z R3# RACK12AS>7 [Resuming connection 7 to r7 ... ] *Ma R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/1 R7(config-if)#vrr 55 ip 180.40.7.133 R7(config-if)# *Mar 1 21:51:07.464: %VRRP-6-STATECHANGE: Fa0/1 Grp 55 state Init -> Backup^Z R7# *Mar 1 21:51:08.726: %SYS-5-CONFIG_I: Configured from console by console R7# RACK12AS>3 [Resuming connection 3 to r3 ... ] *Mar R3#sh run int            ^x4 % Unknown command or computer name, or unable to find computer address R3# R3# RACK12AS>4 [Resuming connection 4 to r4 ... ] Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#n   do sh run | i local ip local policy route-map Prob2 R4(config)#no ip local policy route-map Prob2 R4(config)#^Z R4#ping 1 *Mar 2 02:00:30.769: %SYS-5-CONFIG_I: Configured from console by console R4#ping 180.40.7.133 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.133, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 4/4/4 ms R4#ping 180.40.7.133 2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.132, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 1/1/1 ms R4#sh arp Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.131 119 0012.8014.1a61 ARPA FastEthernet0/0 Internet 180.40.7.130 - 000e.38f1.63e0 ARPA FastEthernet0/0 Internet 180.40.7.129 122 0012.8014.1a00 ARPA FastEthernet0/0 Internet 180.40.7.133 0 0000.5e00.0137 ARPA FastEthernet0/0 Internet 180.40.7.132 0 0000.0c07.ac2f ARPA FastEthernet0/0 R4#x3 % Incomplete command. R4# R4# RACK12AS>3 [Resuming connection 3 to r3 ... ] R3#sh run int fa 0/0 Building configuration... Current configuration : 368 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto vrrp 55 ip 180.40.7.133 vrrp 55 priority 101 standby 47 ip 180.40.7.132 standby 47 priority 150 standby 47 preempt standby 47 track Serial1/0 51 standby 47 track Serial1/2 51 standby 47 track 3 decrement 55 service-policy input test end R3# R3# RACK12AS>7 [Resuming connection 7 to r7 ... ] R7#sh run int fa 0/1 Building configuration... Current configuration : 201 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 speed auto half-duplex vrrp 55 ip 180.40.7.133 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7# R7#sh vrr R7#sh vrrp br R7#sh vrrp brief Interface Grp Pri Time Own Pre State Master addr Group addr Fa0/1 55 100 3609 Y Backup 180.40.7.129 180.40.7.133 R7# R7# R7# R7# R7# RACK12AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#i ip h dhjcp     cp pol io R3(config)#ip dhcp poio   R3(config)#ip dhcp pool ? WORD Pool name R3(config)#ip dhcp pool Prob15 R3(dhcp-config)#net R3(dhcp-config)#netw R3(dhcp-config)#network 180.40.7.128 /27 R3(dhcp-config)#de R3(dhcp-config)#default-router 180.40.7.132 R3(dhcp-config)#dom R3(dhcp-config)#domain-name ? WORD Domain name R3(dhcp-config)#domain-name cciestudent.com R3(dhcp-config)#dns R3(dhcp-config)#dns-server ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#dns-server 208.28.1.82 R3(dhcp-config)#op R3(dhcp-config)#option 150 ? ascii Data is an NVT ASCII string hex Data is a hexadecimal string instance Specify the option instance ip Data is one or more IP addresses R3(dhcp-config)#option 150 ip 20.20.20.20 R3(dhcp-config)#exit R3(config)#ip dhcp ? aaa Configure aaa attributes binding DHCP address bindings bootp BOOTP specific configuration conflict DHCP address conflict parameters database Configure DHCP database agents excluded-address Prevent DHCP from assigning certain addresses limited-broadcast-address Use all 1's broadcast address ping Specify ping parameters used by DHCP pool Configure DHCP address pools relay DHCP relay agent parameters smart-relay Enable Smart Relay feature R3(config)#ip dhcp ex R3(config)#ip dhcp excluded-address 180.40.7.131 180.40.7.134 R3(config)# RACK12AS>4 [Resuming connection 4 to r4 ... ] R4#config t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int fa 0/. 0 R4(config-if)#ip add dhcp R4(config-if)# *Mar 2 02:15:06.681: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 02:15:06.681: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R4(config-if)# *Mar 2 02:15:17.849: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.130, mask 255.255.255.224, hostname R4 R4(config-if)# RACK12AS>3 [Resuming connection 3 to r3 ... ] R3(config)#do sh *Mar 2 02:13:07.538: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from LOADING to FULL, Loading Done R3(config)#do sh ip dhcp bi Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 180.40.7.130 0063.6973.636f.2d30. Mar 03 1993 02:12 AM Automatic 3030.652e.3338.6631. 2e36.3365.302d.4661. 302f.30 R3(config)# R3# *Mar 2 02:13:17.530: %SYS-5-CONFIG_I: Configured from console by console R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip dhcp po R3(config)#ip dhcp pool R4 R3(dhcp-config)#cli R3(dhcp-config)#client-i R3(dhcp-config)#client-identifier 0063.6973.636f.2d30.3030.652e.3338.6631.2e3$tifier 0063.6973.636f.2d30.3030.652e.3338.6631.2e36 .3365.3023.6973.636f.2d30.3030.652e.3338.6631.2e36.3365.302d .4661.302f.2d30.3030.652e.3338.6631.2e36.3365.302d.4661.302f .30 R3(dhcp-config)#host 180.40.7.130 /27 % A binding already exists for 180.40.7.130. R3(dhcp-config)#do clea ip dhcp bin * % Ambiguous command: "do clea ip dhcp bin *" R3(config)#do clea ip dhcp bin ** R3(config)#do clea ip dhcp bin *host 180.40.7.130 /27$3.6973.636f.2d30.3030.652e.3338.6631.2e36.3365.302d.4661.302f.30ip dhcp pool R4  R3(dhcp-config)#ip dhcp pool R4do clea ip dhcp bin *host 180.40.7.130 /27 R3(dhcp-config)# RACK12AS>6 [Resuming connection 6 to r6 ... ] 1d01 S6#int s     config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 0/4 S6(config-if)#sp S6(config-if)#spa S6(config-if)#spanning-tree p S6(config-if)#spanning-tree portf S6(config-if)#spanning-tree portfast %Warning: portfast should only be enabled on ports connected to a single host. Connecting hubs, concentrators, switches, bridges, etc... to this interface when portfast is enabled, can cause temporary bridging loops. Use with CAUTION %Portfast has been configured on FastEthernet0/4 but will only have effect when the interface is in a non-trunking mode. S6(config-if)#^Z S6# RACK12AS>5 [Resuming connection 5 to r5 ... ] S5#config t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int fa 0/3 S5(config-if)#sp S5(config-if)#spa S5(config-if)#spanning-tree p S5(config-if)#spanning-tree portf S5(config-if)#spanning-tree portfast %Warning: portfast should only be enabled on ports connected to a single host. Connecting hubs, concentrators, switches, bridges, etc... to this interface when portfast is enabled, can cause temporary bridging loops. Use with CAUTION %Portfast has been configured on FastEthernet0/3 but will only have effect when the interface is in a non-trunking mode. S5(config-if)#^Z S5# RACK12AS>4 [Resuming connection 4 to r4 ... ] *Mar R4(config-if)#ip add 1.1.1.1 255.255.255.0 R4(config-if)# *Mar 2 02:17:43.577: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 02:17:43.577: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R4(config-if)#ip add dhcp R4(config-if)#^Z R4# *Mar 2 02:17:49.521: %SYS-5-CONFIG_I: Configured from console by console R4#deb ip *Mar 2 02:17:52.817: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.130, mask 255.255.255.224, hostname R4 R4#deb ip        sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 180.40.7.132 to network 0.0.0.0 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 180.40.0.0/27 is subnetted, 1 subnets C 180.40.7.128 is directly connected, FastEthernet0/0 S* 0.0.0.0/0 [254/0] via 180.40.7.132 R4#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 180.40.7.132 to network 0.0.0.0 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 180.40.0.0/27 is subnetted, 1 subnets C 180.40.7.128 is directly connected, FastEthernet0/0 S* 0.0.0.0/0 [254/0] via 180.40.7.132 R4# *Mar 2 02:18:00.705: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done R4# *Mar 2 02:18:05.401: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from LOADING to FULL, Loading Done R4#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 180.40.7.132 to network 0.0.0.0 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/793] via 180.40.7.131, 00:01:08, FastEthernet0/0 [110/793] via 180.40.7.129, 00:01:08, FastEthernet0/0 O 20.10.1.0 [110/783] via 180.40.7.131, 00:01:08, FastEthernet0/0 [110/783] via 180.40.7.129, 00:01:08, FastEthernet0/0 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:01:08, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 5 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/782] via 180.40.7.131, 00:01:09, FastEthernet0/0 [110/782] via 180.40.7.129, 00:01:09, FastEthernet0/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:01:09, FastEthernet0/0 --More--  O 180.40.7.0/27 [110/782] via 180.40.7.129, 00:01:10, FastEthernet0/0 O 180.40.7.64/27 [110/782] via 180.40.7.129, 00:01:10, FastEthernet0/0 [110/782] via 180.40.7.131, 00:01:10, FastEthernet0/0 S* 0.0.0.0/0 [254/0] via 180.40.7.132 R4#config tr ^ % Invalid input detected at '^' marker. R4#config tr  Enter configuration commands, one per line. End with CNTL/Z. R4(config)#ip rout 0.0.0.0.    0.0.0.0 180.40.7.132 255 % Ambiguous command: "ip rout 0.0.0.0 0.0.0.0 180.40.7.132 255" R4(config)#ip rout 0.0.0.0 0.0.0.0 180.40.7.132 255te 0.0.0.0 0.0.0.0 180.40.7.132 255 R4(config)#do sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 180.40.7.132 to network 0.0.0.0 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/793] via 180.40.7.131, 00:01:51, FastEthernet0/0 [110/793] via 180.40.7.129, 00:01:51, FastEthernet0/0 O 20.10.1.0 [110/783] via 180.40.7.131, 00:01:51, FastEthernet0/0 [110/783] via 180.40.7.129, 00:01:51, FastEthernet0/0 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:01:51, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 5 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/782] via 180.40.7.131, 00:01:52, FastEthernet0/0 [110/782] via 180.40.7.129, 00:01:52, FastEthernet0/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:01:52, FastEthernet0/0 --More--  O 180.40.7.0/27 [110/782] via 180.40.7.129, 00:01:52, FastEthernet0/0 O 180.40.7.64/27 [110/782] via 180.40.7.129, 00:01:53, FastEthernet0/0 [110/782] via 180.40.7.131, 00:01:53, FastEthernet0/0 S* 0.0.0.0/0 [254/0] via 180.40.7.132 R4(config)#do sh ip routeip route 0.0.0.0 0.0.0.0 180.40.7.132 255nip route 0.0.0.0 0.0.0.0 180.40.7.132 255oip route 0.0.0.0 0.0.0.0 180.40.7.132 255 ip route 0.0.0.0 0.0.0.0 180.40.7.132 255 R4(config)#^Z R4# RACK12AS>3 [Resuming connection 3 to r3 ... ] * R3(dhcp-config)#no ip d R3(dhcp-config)#no ip de R3(dhcp-config)#no ip def R3(dhcp-config)#no ip def        o def R3(dhcp-config)#no default-router % Option 3, instance 0 is not in the database. R3(dhcp-config)#do sh ru n\     n | b dhcp % Ambiguous command: "do sh run | b dhcp" R3(config)#do sh run | b dhcp ip dhcp excluded-address 180.40.7.131 180.40.7.134 ! ip dhcp pool Prob15 network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 domain-name cciestudent.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! ip dhcp pool R4 host 180.40.7.130 255.255.255.224 client-identifier 0063.6973.636f.2d30.3030.652e.3338.6631.2e36.3365.302d.4661.302f.30 ! ip cef no ip domain lookup ip audit po max-events 100 ! ! ! ! ! ! --More--   R3(config)#int fa 0/0 R3(config-if)#ip add dhcp R3(config-if)# *Mar 2 02:19:25.702: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from 2WAY to DOWN, Neighbor Down: Interface down or detached *Mar 2 02:19:25.706: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R3(config-if)# *Mar 2 02:19:25.706: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Init *Mar 2 02:19:25.710: %VRRP-6-STATECHANGE: Fa0/0 Grp 55 state Master -> Disable R3(config-if)# RACK12AS>7 [Resuming connection 7 to r7 ... ] *Ma R7#co *Mar 1 22:18:03.421: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/1 from FULL to DOWN, Neighbor Down: Dead timer expired R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/1 R7(config-if)#ip hel R7(config-if)#ip helop R7(config-if)#ip helop   R7(config-if)#ip helop  p R7(config-if)#ip helper-address 180.40.7.66 R7(config-if)#^Z R7# *Mar 1 22:18:22.753: %SYS-5-CONFIG_I: Configured from console by console R7# *Mar 1 22:18:38.295: %HSRP-6-STATECHANGE: FastEthernet0/1 Grp 47 state Active -> Speak R7# RACK12AS>3 [Resuming connection 3 to r3 ... ] *Ma R3(config-if)#do sh ip *Mar 2 02:20:35.657: %VRRP-6-STATECHANGE: Fa0/0 Grp 55 state Backup -> Master R3(config-if)#do sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 180.40.7.135 YES DHCP up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 180.40.7.66 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.1 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More-- *Mar 2 02:20:42.059: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 2 02:20:42.063: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from LOADING to FULL, Loading Done --More--   R3(config-if)#do sh ip dhcp bin Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 180.40.7.130 0063.6973.636f.2d30. Infinite Manual 3030.652e.3338.6631. 2e36.3365.302d.4661. 302f.30 180.40.7.135 0063.6973.636f.2d30. Mar 03 1993 02:20 AM Automatic 3031.322e.3830.3134. 2e31.6130.302d.4661. 302f.30 R3(config-if)# R3# *Mar 2 02:20:57.408: %SYS-5-CONFIG_I: Configured from console by console R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int   ip dhcp pool R3 R3(dhcp-config)#cli R3(dhcp-config)#client-i R3(dhcp-config)#client-identifier 0063.6973.636f.2d30.3031.322e.3830.3134.2e3$tifier 0063.6973.636f.2d30.3031.322e.3830.3134.2e31 .6130.3023.6973.636f.2d30.3031.322e.3830.3134.2e31.6130.302d .4661.302f.2d30.3031.322e.3830.3134.2e31.6130.302d.4661.302f .30 R3(dhcp-config)#host 180.40.7.129 /27 R3(dhcp-config)#^Z R3# *Mar 2 02:21:40.166: %SYS-5-CONFIG_I: Configured from console by console R3#clea ip dhcp bin * R3#in  config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#no ip add R3(config-if)#ip a *Mar 2 02:22:00.283: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 02:22:00.283: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 02:22:00.283: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Init *Mar 2 02:22:00.287: %VRRP-6-STATECHANGE: Fa0/0 Grp 55 state Master -> Disable R3(config-if)#ip add dhcp R3(config-if)#^Z R3# *Mar 2 02:22:03.669: %SYS-5-CONFIG_I: Configured from console by console R3# *Mar 2 02:22:09.691: %VRRP-6-STATECHANGE: Fa0/0 Grp 55 state Init -> Backup *Mar 2 02:22:09.695: %VRRP-6-STATECHANGE: Fa0/0 Grp 55 state Backup -> Disable *Mar 2 02:22:09.695: %VRRP-6-STATECHANGE: Fa0/0 Grp 55 state Init -> Backup R3# *Mar 2 02:22:10.724: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.129, mask 255.255.255.224, hostname R3 R3# *Mar 2 02:22:12.143: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Listen -> Active R3# *Mar 2 02:22:13.301: %VRRP-6-STATECHANGE: Fa0/0 Grp 55 state Backup -> Master R3# *Mar 2 02:22:18.593: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 2 02:22:18.597: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from LOADING to FULL, Loading Done R3#s sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 180.40.7.129 YES DHCP up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 180.40.7.66 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.1 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--  Serial1/6 unassigned YES unset administratively down down Serial1/7 unassigned YES unset administratively down down R3#q ship route ^ % Invalid input detected at '^' marker. R3#sh ip rotue ^ % Invalid input detected at '^' marker. R3#sh ip rooute ^ % Invalid input detected at '^' marker. R3#sh ip roouteute  Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 180.40.7.132 to network 0.0.0.0 100.0.0.0/32 is subnetted, 1 subnets O 100.1.1.1 [110/2] via 180.40.7.130, 00:00:15, FastEthernet0/0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/792] via 180.40.7.2, 00:00:15, Serial1/2 [110/792] via 180.40.7.67, 00:00:15, Serial1/0 O 20.10.1.0 [110/782] via 180.40.7.67, 00:00:15, Serial1/0 [110/782] via 180.40.7.2, 00:00:15, Serial1/2 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:00:15, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 5 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/781] via 180.40.7.67, 00:00:16, Serial1/0 [110/781] via 180.40.7.2, 00:00:16, Serial1/2 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:00:16, FastEthernet0/0 --More--  C 180.40.7.0/27 is directly connected, Serial1/2 C 180.40.7.64/27 is directly connected, Serial1/0 S* 0.0.0.0/0 [254/0] via 180.40.7.132 R3# R3# R3# R3# R3#sh run | b dhcp ip dhcp excluded-address 180.40.7.131 180.40.7.134 ! ip dhcp pool Prob15 network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 domain-name cciestudent.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! ip dhcp pool R4 host 180.40.7.130 255.255.255.224 client-identifier 0063.6973.636f.2d30.3030.652e.3338.6631.2e36.3365.302d.4661.302f.30 ! ip dhcp pool R3 host 180.40.7.129 255.255.255.224 client-identifier 0063.6973.636f.2d30.3031.322e.3830.3134.2e31.6130.302d.4661.302f.30 ! ip cef no ip domain lookup ip audit po max-events 100 ! --More--  ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! track 3 ip route 20.10.2.0 255.255.255.0 reachability ! ! ! class-map match-all dscp26 match dscp af31 class-map match-all dscp24 match dscp cs3 --More--  class-map match-all telnet match protocol telnet class-map match-all AF12 match dscp af12 class-map match-all dscp28 match dscp af32 class-map match-all prec3 match ip precedence 3 class-map match-all ftp match protocol ftp ! ! policy-map test class dscp24 class dscp26 class dscp28 class prec3 policy-map Prob7 class telnet bandwidth percent 24 class ftp bandwidth percent 51 class class-default --More--   bandwidth percent 25 policy-map Prob11 class AF12 priority percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address dhcp ip policy route-map Prob1 duplex auto speed auto vrrp 55 ip 180.40.7.133 vrrp 55 priority 101 standby 47 ip 180.40.7.132 standby 47 priority 150 standby 47 preempt standby 47 track Serial1/0 51 standby 47 track Serial1/2 51 standby 47 track 3 decrement 55 --More--   service-policy input test ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network broadcast frame-relay map ip 180.40.7.65 307 broadcast tcp header-compression connections 20 frame-relay map ip 180.40.7.67 302 broadcast ! interface Serial1/1 no ip address shutdown --More--   R3# RACK12AS>7 [Resuming connection 7 to r7 ... ] * R7#sh run int fa 0/1 Building configuration... Current configuration : 232 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 speed auto half-duplex vrrp 55 ip 180.40.7.133 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7# R7# RACK12AS>2 [Resuming connection 2 to r2 ... ] *Mar R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#ip dhcp excluded-address 20.10.1.1 R2(config)#! R2(config)#ip dhcp pool Prob16 R2(dhcp-config)# host 20.10.1.2 /24 R2(dhcp-config)# client-identifier 0063.6973.636f.2d30.3031.312e.3932.3132.$dentifier 0063.6973.636f.2d30.3031.312e.3932.3132.2 e64.6530.0063.6973.636f.2d30.3031.312e.3932.3132.2e64.6530.3 02d.4661.636f.2d30.3031.312e.3932.3132.2e64.6530.302d.4661.3 02f.32 R2(dhcp-config)#int fa 0/1 R2(config-if)#ip help R2(config-if)#ip helper-address 208.28.1.99 R2(config-if)#^Z R2#. RACK12AS>7 [Resuming connection 7 to r7 ... ] R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0.2 R7(config-subif)#fram map ip 180.6 40.7.162 702 Only frame-relay interface-dlci command should beused on point-to-point interfaces not frame-relay map R7(config-subif)#fram in R7(config-subif)#fram int R7(config-subif)#fram interface-dlci 702 ? cisco Use CISCO Encapsulation ietf Use RFC1490/RFC2427 Encapsulation ppp Use RFC1973 Encapsulation to support PPP over FR protocol Optional protocol information for remote end R7(config-subif)#fram interface-dlci 702 pro R7(config-subif)#fram interface-dlci 702 protocol ? A.B.C.D Protocol specific address ip IP R7(config-subif)#fram interface-dlci 702 protocol ip ? A.B.C.D Protocol specific address R7(config-subif)#fram interface-dlci 702 protocol ip 180.5 40.7.162 ? R7(config-subif)#fram interface-dlci 702 protocol ip 180.40.7.162   %Can't add another VC to point-to-point subinterface R7(config-fr-dlci)#do shj    u run int s 1/0.2 Building configuration... Current configuration : 208 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 end R7(config-fr-dlci)#exit R7(config-subif)#no frame-relay interface-dlci 702 R7(config-subif)#no frame-relay interface-dlci 702exit  *Mar 1 22:29:48.421: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from FULL to DOWN, Neighbor Down: Interface down or detached R7(config-subif)#exitdo sh run int s 1/0.2fram interface-dlci 702 protocol ip 180.40.7.162 R7(config-fr-dlci)#? Frame Relay dlci configuration commands: auto Configure Automation class Assign a mapclass to a dlci default Set a command to its defaults exit Exit from FR dlci configuration mode load-interval Specify interval for load calculation for a dlci no Negate a command or set its defaults vofr Voice over Frame-Relay R7(config-fr-dlci)# *Mar 1 22:29:54.495: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from LOADING to FULL, Loading Done R7(config-fr-dlci)#fram interface-dlci 702 protocol ip 180.40.7.162no frame-relay interface-dlci 702 exit do sh run int s 1/0.2 Building configuration... Current configuration : 230 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 protocol ip 180.40.7.162 end R7(config-fr-dlci)#^Z R7# *Mar 1 22:30:04.680: %SYS-5-CONFIG_I: Configured from console by console R7#confi gt ^ % Invalid input detected at '^' marker. R7#~confi gt  t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0.2 R7(config-subif)#ip help R7(config-subif)#ip helper-address 208.28.1.99 R7(config-subif)#^Z R7#^x2 % Unknown command or computer name, or unable to find computer address R7# *Mar 1 22:30:27.589: %SYS-5-CONFIG_I: Configured from console by console R7# RACK12AS>2 [Resuming connection 2 to r2 ... ] *M % Unknown command or computer name, or unable to find computer address R2#sh run | b dhcp ip dhcp excluded-address 20.10.1.1 ! ip dhcp pool Prob16 host 20.10.1.2 255.255.255.0 client-identifier 0063.6973.636f.2d30.3031.312e.3932.3132.2e64.6530.302d.4661.302f.32 ! ip cef no ip domain lookup ip audit po max-events 100 frame-relay de-list 1 protocol ip list 100 ! ! ! ! ! ! ! ! ! ! ! ! --More--  ! ! ! ! ! ! ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 20.10.1.1 255.255.255.0 ip helper-address 208.28.1.99 duplex auto speed auto --More--  ! --More--  interface Serial1/0 --More--   R2# R2# RACK12AS>7 [Resuming connection 7 to r7 ... ] R7#sh run int s 1/0.2 Building configuration... Current configuration : 261 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 protocol ip 180.40.7.162 end R7# R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int     ta rack R7(config)#track ? <1-500> Tracked object resolution Tracking resolution parameters timer Polling interval timers R7(config)#track 1 ip re R7(config)#track 1 ip re  ? route IP route R7(config)#track 1 ip rou R7(config)#track 1 ip route ? A.B.C.D {/nn || A.B.C.D} Prefix and mask R7(config)#track 1 ip route 20.10.1.0/24 re R7(config)#track 1 ip route 20.10.1.0/24 reachability R7(config-track)#exit R7(config)#int fa 0/1 R7(config-if)#gl R7(config-if)#glbp ? <0-1023> Group number R7(config-if)#glbp 199 ? authentication Authentication method forwarder Forwarder configuration ip Enable group and set virtual IP address load-balancing Load balancing method preempt Overthrow lower priority designated routers priority Priority level timers Adjust GLBP timers weighting Gateway weighting and tracking R7(config-if)#glbp 199 ip 180.40.7.1343    ? secondary Make this IP address a secondary address R7(config-if)#glbp 199 ip 180.40.7.134 R7(config-if)#f gl R7(config-if)#glbp 199 ? authentication Authentication method forwarder Forwarder configuration ip Enable group and set virtual IP address load-balancing Load balancing method preempt Overthrow lower priority designated routers priority Priority level timers Adjust GLBP timers weighting Gateway weighting and tracking R7(config-if)#glbp 199 *Mar 1 22:34:08.175: %GLBP-6-STATECHANGE: FastEthernet0/1 Grp 199 state Standby -> Active R7(config-if)#glbp 199 *Mar 1 22:34:18.175: %GLBP-6-FWDSTATECHANGE: FastEthernet0/1 Grp 199 Fwd 1 state Listen -> Active R7(config-if)#glbp 199          do sh gl FastEthernet0/1 - Group 199 State is Active 2 state changes, last state change 00:00:49 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.890 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is local Standby is unknown Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Load balancing: round-robin There is 1 forwarder (1 active) Forwarder 1 State is Active 1 state change, last state change 00:00:39 MAC address is 0007.b400.c701 (default) Owner ID is 0012.8014.1a61 Redirection enabled Preemption enabled, min delay 30 sec Active is local, weighting 100 R7(config-if)#gl R7(config-if)#glbp 199 ? authentication Authentication method forwarder Forwarder configuration ip Enable group and set virtual IP address load-balancing Load balancing method preempt Overthrow lower priority designated routers priority Priority level timers Adjust GLBP timers weighting Gateway weighting and tracking R7(config-if)#glbp 199 we R7(config-if)#glbp 199 weighting ? <1-254> Weighting maximum value track Interface tracking R7(config-if)#glbp 199 weighting tr R7(config-if)#glbp 199 weighting track ? <1-500> Tracked object R7(config-if)#glbp 199 weighting track 1 ? decrement Weighting decrement R7(config-if)#glbp 199 weighting track 1 dec ? <1-255> Decrement value R7(config-if)#glbp 199 weighting track 1 dec 50 R7(config-if)#gl R7(config-if)#glbp 199 ? authentication Authentication method forwarder Forwarder configuration ip Enable group and set virtual IP address load-balancing Load balancing method preempt Overthrow lower priority designated routers priority Priority level timers Adjust GLBP timers weighting Gateway weighting and tracking R7(config-if)#glbp 199 w R7(config-if)#glbp 199 weighting ? <1-254> Weighting maximum value track Interface tracking R7(config-if)#glbp 199 weighting 100 ? lower Weighting lower threshold upper Weighting upper threshold R7(config-if)#glbp 199 weighting 100 lo R7(config-if)#glbp 199 weighting 100 lower 75 ? upper Weighting upper threshold R7(config-if)#glbp 199 weighting 100 lower 75 up R7(config-if)#glbp 199 weighting 100 lower 75 upper 100 R7(config-if)#glbp 199 weighting 100 lower 75 upper 100track 1 dec 50 do sh gl  FastEthernet0/1 - Group 199 State is Active 2 state changes, last state change 00:06:14 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 0.327 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is local Standby is unknown Priority 100 (default) Weighting 100 (configured 100), thresholds: lower 75, upper 100 Track object 1 state Up decrement 50 Load balancing: round-robin There is 1 forwarder (1 active) Forwarder 1 State is Active 1 state change, last state change 00:06:04 MAC address is 0007.b400.c701 (default) Owner ID is 0012.8014.1a61 Redirection enabled Preemption enabled, min delay 30 sec Active is local, weighting 100 R7(config-if)#^Z R7# RACK12AS>3 [Resuming connection 3 to r3 ... ] R3#confn  t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int     tra R3(config)#trac R3(config)#track 4 ip R3(config)#track 4 ip ou R3(config)#track 4 ip ou  rou R3(config)#track 4 ip route 1~ 20   20.10.1.0/24 re R3(config)#track 4 ip route 20.10.1.0/24 reachability R3(config-track)#int fa 0/0 R3(config-if)#gl R3(config-if)#glbp 199 iop  p 180.40.7.134 R3(config-if)#gl R3(config-if)#glbp 199 R3(config-if)#glbp 199 w R3(config-if)#glbp 199 weighting 1 ? <1-254> Weighting maximum value track Interface tracking R3(config-if)#glbp 199 weighting 100 ? lower Weighting lower threshold upper Weighting upper threshold R3(config-if)#glbp 199 weighting 100 lo R3(config-if)#glbp 199 weighting 100 lower 50 up       75 *Mar 2 02:43:54.982: %GLBP-6-FWDSTATECHANGE: FastEthernet0/0 Grp 199 Fwd 2 state Listen -> Active R3(config-if)#glbp 199 weighting 100 lower 75 hi    up `9  100 R3(config-if)#gl 199 wu   eiu    i tr R3(config-if)#gl 199 wei track 4 de R3(config-if)#gl 199 wei track 4 decrement 50 R3(config-if)#gl 199 wei track 4 decrement 50 gl 199 wei track 4 decrement 50 gl 199 wei track 4 decrement 50 decrement 50 3 decrement 50 R3(config-if)#^Z R3#s *Mar 2 02:44:38.931: %SYS-5-CONFIG_I: Configured from console by console R3#sh glb FastEthernet0/0 - Group 199 State is Standby 1 state change, last state change 00:00:39 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 2.243 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 9.403 sec) Standby is local Priority 100 (default) Weighting 100 (configured 100), thresholds: lower 75, upper 100 Track object 3 state Up decrement 50 Track object 4 state Up decrement 50 Load balancing: round-robin There are 2 forwarders (1 active) Forwarder 1 State is Listen MAC address is 0007.b400.c701 (learnt) Owner ID is 0012.8014.1a61 Time to live: 14399.399 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 9.399 sec) --More--   Forwarder 2 State is Active 1 state change, last state change 00:00:48 MAC address is 0007.b400.c702 (default) Owner ID is 0012.8014.1a00 Preemption enabled, min delay 30 sec Active is local, weighting 100 R3# RACK12AS>6 [Resuming connection 6 to r6 ... ] 1d S6#confi gt ^ % Invalid input detected at '^' marker. S6#confi gt ^ % Invalid input detected at '^' marker. S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#iu ~nt fa 01 /1 ^ % Invalid input detected at '^' marker. S6(config)#i~nt fa 0/1nt fa 0/1  S6(config-if)#shut S6(config-if)# 1d02h: %OSPF-5-ADJCHG: Process 1, Nbr 20.10.2.2 on FastEthernet0/1 from FULL to DOWN, Neighbor Down: Interface down or detached S6(config-if)# RACK12AS>3 [Resuming connection 3 to r3 ... ] R3#sh glb br R3#sh glb brief Interface Grp Fwd Pri State Address Active router Standby router Fa0/0 199 - 100 Standby 180.40.7.134 180.40.7.131 local Fa0/0 199 1 7 Listen 0007.b400.c701 180.40.7.131 - Fa0/0 199 2 7 Active 0007.b400.c702 local - R3# *Mar 2 02:46:03.802: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Speak R3#sh glb brief         FastEthernet0/0 - Group 199 State is Standby 1 state change, last state change 00:02:25 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 2.026 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 9.191 sec) Standby is local Priority 100 (default) Weighting 50, low (configured 100), thresholds: lower 75, upper 100 Track object 3 state Down decrement 50 Track object 4 state Up decrement 50 Load balancing: round-robin There are 2 forwarders (1 active) Forwarder 1 State is Listen MAC address is 0007.b400.c701 (learnt) Owner ID is 0012.8014.1a61 Time to live: 14399.187 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 9.187 sec) --More--   Forwarder 2 State is Active 1 state change, last state change 00:02:33 MAC address is 0007.b400.c702 (default) Owner ID is 0012.8014.1a00 Preemption enabled, min delay 30 sec Active is local, weighting 50 R3# *Mar 2 02:46:32.028: %GLBP-6-FWDSTATECHANGE: FastEthernet0/0 Grp 199 Fwd 2 state Active -> Listen R3#sh glb FastEthernet0/0 - Group 199 State is Standby 1 state change, last state change 00:02:50 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.037 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 8.201 sec) Standby is local Priority 100 (default) Weighting 50, low (configured 100), thresholds: lower 75, upper 100 Track object 3 state Down decrement 50 Track object 4 state Up decrement 50 Load balancing: round-robin There are 2 forwarders (0 active) Forwarder 1 State is Listen MAC address is 0007.b400.c701 (learnt) Owner ID is 0012.8014.1a61 Time to live: 14398.197 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 8.197 sec) --More--   Forwarder 2 State is Listen 2 state changes, last state change 00:00:21 MAC address is 0007.b400.c702 (default) Owner ID is 0012.8014.1a00 Preemption enabled, min delay 30 sec Active is 180.40.7.131 (secondary), weighting 100 (expires in 9.587 sec) R3# RACK12AS>6 [Resuming connection 6 to r6 ... ] 1 S6(config-if)#no shut S6(config-if)#^Z S6# 1d02h: %SYS-5-CONFIG_I: Configured from console by console S6# RACK12AS>3 [Resuming connection 3 to r3 ... ] R3#sh glb FastEthernet0/0 - Group 199 State is Standby 1 state change, last state change 00:03:17 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 0.440 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 7.600 sec) Standby is local Priority 100 (default) Weighting 50, low (configured 100), thresholds: lower 75, upper 100 Track object 3 state Down decrement 50 Track object 4 state Up decrement 50 Load balancing: round-robin There are 2 forwarders (0 active) Forwarder 1 State is Listen MAC address is 0007.b400.c701 (learnt) Owner ID is 0012.8014.1a61 Time to live: 14397.596 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 7.596 sec) --More--   Forwarder 2 State is Listen 2 state changes, last state change 00:00:48 MAC address is 0007.b400.c702 (default) Owner ID is 0012.8014.1a00 Preemption enabled, min delay 30 sec Active is 180.40.7.131 (secondary), weighting 100 (expires in 9.856 sec) R3#sh glb FastEthernet0/0 - Group 199 State is Standby 1 state change, last state change 00:03:32 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 0.785 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 7.953 sec) Standby is local Priority 100 (default) Weighting 100 (configured 100), thresholds: lower 75, upper 100 Track object 3 state Up decrement 50 Track object 4 state Up decrement 50 Load balancing: round-robin There are 2 forwarders (0 active) Forwarder 1 State is Listen MAC address is 0007.b400.c701 (learnt) Owner ID is 0012.8014.1a61 Time to live: 14397.949 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 7.945 sec) --More-- *Mar 2 02:47:33.833: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active --More--   Forwarder 2 State is Listen 2 state changes, last state change 00:01:03 MAC address is 0007.b400.c702 (default) Owner ID is 0012.8014.1a00 Preemption enabled, min delay 30 sec (26 secs remaining) Active is 180.40.7.131 (secondary), weighting 100 (expires in 9.375 sec) R3# *Mar 2 02:48:02.220: %GLBP-6-FWDSTATECHANGE: FastEthernet0/0 Grp 199 Fwd 2 state Listen -> Active R3#sh run | b track track 3 ip route 20.10.2.0 255.255.255.0 reachability ! track 4 ip route 20.10.1.0 255.255.255.0 reachability ! ! ! class-map match-all dscp26 match dscp af31 class-map match-all dscp24 match dscp cs3 class-map match-all telnet match protocol telnet class-map match-all AF12 match dscp af12 class-map match-all dscp28 match dscp af32 class-map match-all prec3 match ip precedence 3 class-map match-all ftp match protocol ftp ! ! policy-map test --More--   class dscp24 class dscp26 class dscp28 class prec3 policy-map Prob7 class telnet bandwidth percent 24 class ftp bandwidth percent 51 class class-default bandwidth percent 25 policy-map Prob11 class AF12 priority percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address dhcp ip policy route-map Prob1 --More--   duplex auto speed auto vrrp 55 ip 180.40.7.133 vrrp 55 priority 101 glbp 199 ip 180.40.7.134 glbp 199 weighting 100 lower 75 glbp 199 weighting track 3 decrement 50 glbp 199 weighting track 4 decrement 50 standby 47 ip 180.40.7.132 standby 47 priority 150 standby 47 preempt standby 47 track Serial1/0 51 standby 47 track Serial1/2 51 standby 47 track 3 decrement 55 service-policy input test ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown --More--   R3# RACK12AS>7 [Resuming connection 7 to r7 ... ] *Mar 1 2 R7#sh run | v   b trac track 1 ip route 20.10.1.0 255.255.255.0 reachability ! ! ! class-map match-all S5Other match access-group 1 class-map match-all S5Telnet match access-group 1 match protocol telnet class-map match-any JPG match protocol http mime "*jpeg" match protocol http url "*.jpeg" match protocol http url "*.jpg" match protocol http url "*.jpe" ! ! policy-map Prob5 class S5Telnet bandwidth 1000 class JPG shape average 1000000 class S5Other police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 --More--  ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 speed auto half-duplex vrrp 55 ip 180.40.7.133 glbp 199 ip 180.40.7.134 glbp 199 weighting 100 lower 75 --More--   glbp 199 weighting track 1 decrement 50 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 ! interface Serial1/0 no ip address encapsulation frame-relay priority-group 1 ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network broadcast ip ospf priority 0 frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 protocol ip 180.40.7.162 --More--   R7# RACK12AS>6 [Resuming connection 6 to r6 ... ] 1d0 S6#sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 14 16 28 32 40 48 56 Dscp-dscp mutation map: Default DSCP Mutation Map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int gi 0/'1  1 S6(config-if)#wrr S6(config-if)#wrr-queue co S6(config-if)#wrr-queue cos-map ? <1-4> enter cos-map queue id S6(config-if)#wrr-queue cos-map 1 ? <0-7> CoS values separated by spaces (up to 8 values total) S6(config-if)#wrr-queue cos-map 1   3 ? <0-7> CoS values separated by spaces (up to 8 values total) S6(config-if)#wrr-queue cos-map 3 0 2 6 7 S6(config-if)#do sh mls qos int gi 0/1 qu GigabitEthernet0/1 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 Dscp-threshold map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 01 01 01 01 01 01 01 01 01 01 1 : 01 01 01 01 01 01 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 01 01 01 01 01 01 01 01 4 : 01 01 01 01 01 01 01 01 01 01 5 : 01 01 01 01 01 01 01 01 01 01 6 : 01 01 01 01 Cos-queue map: cos-qid 0 - 3 1 - 1 2 - 3 3 - 2 4 - 3 5 - 3 6 - 3 7 - 3 S6(config-if)#wrr S6(config-if)#wrr-queue b S6(config-if)#wrr-queue bandwidth ? <1-65536> enter bandwidth weight for qid 1 S6(config-if)#wrr-queue bandwidth 25 25 50 1 S6(config-if)#wrr S6(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id dscp-map Configure dscp-map for a queue threshold queue-limit Configure queue-limit random-detect Configure random-detect threshold Configure queue tail-drop thresholds S6(config-if)#wrr-queue th S6(config-if)#wrr-queue threshold ? <1-4> enter threshold queue id (1-4) S6(config-if)#wrr-queue threshold           ds S6(config-if)#wrr-queue dscp-map ? <1-2> enter dscp-map threshold id (1-2) S6(config-if)#wrr-queue dscp-map 1   2 26    10 26 S6(config-if)#WRR S6(config-if)#WRR-queue TH S6(config-if)#WRR-queue THreshold ? <1-4> enter threshold queue id (1-4) S6(config-if)#WRR-queue THreshold 1 ? <1-100> enter percent of queue size for threshold 1 S6(config-if)#WRR-queue THreshold 1 40    ? <1-100> enter percent of queue size for threshold 1 S6(config-if)#WRR-queue THreshold 1 40 ? <1-100> enter percent of queue size for threshold 2 S6(config-if)#WRR-queue THreshold 1 40 100 S6(config-if)#WRR-queue THreshold 1 40 100        2 60 100 S6(config-if)#EXIT S6(config)#MLS QOS       mls qos map dsc S6(config)#mls qos map dscp-c S6(config)#mls qos map dscp-cos ? <0-63> DSCP values separated by spaces (up to 8 values total) S6(config)#mls qos map dscp-cos 24                         do sh mls qod s map dscp-co Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 S6(config)#mls qos map dsc S6(config)#mls qos map dscp-c S6(config)#mls qos map dscp-cos 9 11      8 1 9 11 13 15 ? <0-63> DSCP values separated by spaces (up to 8 values total) to Specify COS S6(config)#mls qos map dscp-cos 8 9 11 13 15 to 2 0 S6(config)#mls qos map dscp S6(config)#mls qos map dscp-c S6(config)#mls qos map dscp-cos 24 25 27 29 31 to 2 S6(config)#^Z S6#sh run 1d03h: %SYS-5-CONFIG_I: Configured from console by console S6#sh run | % Incomplete command. S6#sh run | b mls mls qos map dscp-cos 8 9 11 13 15 to 0 mls qos map dscp-cos 24 25 27 29 31 to 2 mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 no switchport ip address 20.10.2.1 255.255.255.0 --More--  ! interface FastEthernet0/2 no switchport ip address 20.10.1.2 255.255.255.0 ! interface FastEthernet0/3 switchport mode dynamic desirable ! interface FastEthernet0/4 switchport access vlan 10 switchport mode dynamic desirable mls qos cos 4 spanning-tree portfast ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport mode dynamic desirable ! interface FastEthernet0/7 switchport access vlan 10 switchport mode dynamic desirable --More--   S6#ah run        sh u runb in     int gi 0/1 Building configuration... Current configuration : 270 bytes ! interface GigabitEthernet0/1 switchport mode dynamic desirable wrr-queue bandwidth 25 25 50 1 wrr-queue threshold 1 40 100 wrr-queue threshold 2 60 100 wrr-queue cos-map 1 1 wrr-queue cos-map 2 3 wrr-queue cos-map 3 0 2 4 5 6 7 wrr-queue dscp-map 2 10 26 end S6# S6#config t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int gi 0/2 S6(config-if)# wrr-queue cos-map 1 1 S6(config-if)# wrr-queue cos-map 2 3 S6(config-if)# wrr-queue cos-map 3 0 2 4 5 6 7 S6(config-if)# wrr-queue bandwidth 25 25 50 1 S6(config-if)#wrr ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id dscp-map Configure dscp-map for a queue threshold queue-limit Configure queue-limit random-detect Configure random-detect threshold Configure queue tail-drop thresholds S6(config-if)#wrr ran S6(config-if)#wrr random-detect ? max-threshold max-thresholds S6(config-if)#wrr random-detect m S6(config-if)#wrr random-detect max-threshold ? <1-4> enter threshold queue id (1-4) S6(config-if)#wrr random-detect max-threshold 2 ? <1-100> enter percent of queue size for threshold 1 S6(config-if)#wrr random-detect max-threshold 2                                   wrr S6(config-if)#wrr-queue dsc S6(config-if)#wrr-queue dscp-map ? <1-2> enter dscp-map threshold id (1-2) S6(config-if)#wrr-queue dscp-map 2 ? <0-63> DSCP values separated by spaces (up to 8 values total) S6(config-if)#wrr-queue dscp-map 2 28 30 S6(config-if)#wrr S6(config-if)#wrr-queue r S6(config-if)#wrr-queue random-detect ? max-threshold max-thresholds S6(config-if)#wrr-queue random-detect m S6(config-if)#wrr-queue random-detect max-threshold ? <1-4> enter threshold queue id (1-4) S6(config-if)#wrr-queue random-detect max-threshold 2 ? <1-100> enter percent of queue size for threshold 1 S6(config-if)#wrr-queue random-detect max-threshold 2 ? <1-100> enter percent of queue size for threshold 1 S6(config-if)#wrr-queue random-detect max-threshold 2 100 ? <1-100> enter percent of queue size for threshold 2 S6(config-if)#wrr-queue random-detect max-threshold 2 100 40 ? S6(config-if)#wrr-queue random-detect max-threshold 2 100 40 S6(config-if)#wrr-queue random-detect max-threshold 2 100 40  40 0 40 80 40  S6(config-if)#^Z S6#sh r 1d03h: %SYS-5-CONFIG_I: Configured from console by console S6#sh run int gi 0/2 Building configuration... Current configuration : 257 bytes ! interface GigabitEthernet0/2 switchport mode dynamic desirable wrr-queue bandwidth 25 25 50 1 wrr-queue random-detect max-threshold 2 80 40 wrr-queue cos-map 1 1 wrr-queue cos-map 2 3 wrr-queue cos-map 3 0 2 4 5 6 7 wrr-queue dscp-map 2 28 30 end S6# S6#x\   RACK12AS>7 [Resuming connection 7 to r7 ... ] R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#do sh class Class Map match-all S5Other (id 2) Match access-group 1 Class Map match-any class-default (id 0) Match any Class Map match-all S5Telnet (id 1) Match access-group 1 Match protocol telnet Class Map match-any JPG (id 3) Match protocol http mime "*jpeg" Match protocol http url "*.jpeg" Match protocol http url "*.jpg" Match protocol http url "*.jpe" R7(config)#config t ^ % Invalid input detected at '^' marker. R7(config)#clas R7(config)#class-map ftp R7(config-cmap)#ma pro R7(config-cmap)#ma protocol ftp R7(config-cmap)#exit R7(config)#nb R7(config)#nba R7(config)#nba   ip nb R7(config)#ip nbar ? pdlm PDL (protocol description language) Module port-map Map well-known port of a protocol to a new port resources Configure memory usage for tracking Stateful sessions R7(config)#ip nbar po R7(config)#ip nbar port-map ftp ? tcp TCP ports R7(config)#ip nbar port-map ftp tf cp 20 21 R7(config)#class R7(config)#class-map telnet R7(config-cmap)#mat pro telnet R7(config-cmap)#exit R7(config)#pro R7(config)#pro   pol R7(config)#policy-map Prob20to22 R7(config-pmap)#class R7(config-pmap)#class ftp R7(config-pmap-c)#ban R7(config-pmap-c)#bandwidth pr er R7(config-pmap-c)#bandwidth percent 25 R7(config-pmap-c)#exit R7(config-pmap)#l class telnet R7(config-pmap-c)#class telnetexit  R7(config-pmap)#exit~class telnet R7(config-pmap-c)#class telnetexit class telnetexit bandwidth percent 25 R7(config-pmap-c)#int f 0/0 R7(config-if)#ser R7(config-if)#service-policy out Prob20to22 R7(config-if)#^Z R7#sh *Mar 1 23:31:36.263: %SYS-5-CONFIG_I: Configured from console by console R7#sh run | b class class-map match-all telnet match protocol telnet class-map match-all S5Other match access-group 1 class-map match-all S5Telnet match access-group 1 match protocol telnet class-map match-any JPG match protocol http mime "*jpeg" match protocol http url "*.jpeg" match protocol http url "*.jpg" match protocol http url "*.jpe" class-map match-all ftp match protocol ftp ! ! policy-map Prob5 class S5Telnet bandwidth 1000 class JPG shape average 1000000 class S5Other police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 --More--  policy-map Prob20to22 class ftp bandwidth percent 25 class telnet bandwidth percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex service-policy output Prob20to22 ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 --More--   R7#c onfig t % Ambiguous command: "c onfig t" R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#ip acces ex Prov b21 R7(config-ext-nacl)#per tcp host 87.23.11.123 n any eany qany  any sany qany lany -any any any any       sq R7(config-ext-nacl)#per tcp host 87.23.11.123 eq sq? % Unrecognized command R7(config-ext-nacl)#per tcp host 87.23.11.123 eq sq     ? A.B.C.D Destination address any Any destination host eq Match only packets on a given port number gt Match only packets with a greater port number host A single destination host lt Match only packets with a lower port number neq Match only packets not on a given port number range Match only packets in the range of port numbers R7(config-ext-nacl)#per tcp host 87.23.11.123 eq ? <0-65535> Port number bgp Border Gateway Protocol (179) chargen Character generator (19) cmd Remote commands (rcmd, 514) daytime Daytime (13) discard Discard (9) domain Domain Name Service (53) echo Echo (7) exec Exec (rsh, 512) finger Finger (79) ftp File Transfer Protocol (21) ftp-data FTP data connections (20) gopher Gopher (70) hostname NIC hostname server (101) ident Ident Protocol (113) irc Internet Relay Chat (194) klogin Kerberos login (543) kshell Kerberos shell (544) login Login (rlogin, 513) lpd Printer service (515) nntp Network News Transport Protocol (119) pim-auto-rp PIM Auto-RP (496) --More--   pop2 Post Office Protocol v2 (109) pop3 Post Office Protocol v3 (110) smtp Simple Mail Transport Protocol (25) sunrpc Sun Remote Procedure Call (111) syslog Syslog (514) tacacs TAC Access Control System (49) talk Talk (517) telnet Telnet (23) time Time (37) uucp Unix-to-Unix Copy Program (540) whois Nicname (43) www World Wide Web (HTTP, 80) R7(config-ext-nacl)#per tcp host 87.23.11.123 eq 1433 any R7(config-ext-nacl)#do sh ip nbar port sqls port-map sqlserver tcp 1433 R7(config-ext-nacl)# R7(config-ext-nacl)# R7(config-ext-nacl)# R7(config-ext-nacl)#do sh ip nbar port sqlsper tcp host 87.23.11.123 eq 1433 any    ahost 87.23.11.123 eq 1433 nhost 87.23.11.123 eq 1433 yhost 87.23.11.123 eq 1433  host 87.23.11.123 eq 1433  R7(config-ext-nacl)#exit R7(config)#class R7(config)#class-map sql R7(config-cmap)#match ip add      ac R7(config-cmap)#match access-group Po rob21 ^ % Invalid input detected at '^' marker. R7(config-cmap)#match access-group Prob21      ? <1-2699> Access list index name Named Access List R7(config-cmap)#match access-group name Prob21 R7(config-cmap)#exit R7(config)#cl  p pol R7(config)#policy-map Prob20to22 R7(config-pmap)#class sql R7(config-pmap-c)#pri R7(config-pmap-c)#priority 5 ? <8-2000000> Kilo Bits per second percent % of total bandwidth R7(config-pmap-c)#priority 56 ? <32-2000000> Burst in bytes R7(config-pmap-c)#priority 56 128 R7(config-pmap-c)#^Z R7#sh run | b *Mar 1 23:36:32.741: %SYS-5-CONFIG_I: Configured from console by console R7#sh run | b class class-map match-all telnet match protocol telnet class-map match-all S5Other match access-group 1 class-map match-all S5Telnet match access-group 1 match protocol telnet class-map match-any JPG match protocol http mime "*jpeg" match protocol http url "*.jpeg" match protocol http url "*.jpg" match protocol http url "*.jpe" class-map match-all ftp match protocol ftp class-map match-all sql match access-group name Prob21 ! ! policy-map Prob5 class S5Telnet bandwidth 1000 class JPG shape average 1000000 --More--   class S5Other police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob20to22 class ftp bandwidth percent 25 class telnet bandwidth percent 25 class sql priority 56 128 ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex service-policy output Prob20to22 ! interface BRI0/0 --More--   R7#confi g t Enter configuration commands, one per line. End with CNTL/Z. R7(config)# R7(config)#pol R7(config)#policy-map Prob20  to  22 R7(config-pmap)#class ftp R7(config-pmap-c)#no bandwidth percent 25 R7(config-pmap-c)#ban R7(config-pmap-c)#bandwidth re R7(config-pmap-c)#bandwidth remaining ? percent % of the remaining bandwidth R7(config-pmap-c)#bandwidth remaining p R7(config-pmap-c)#bandwidth remaining percent 25 All classes with bandwidth should have consistent units R7(config-pmap-c)#no policy-map Prob20to22 R7(config)#no policy-map Prob20to22bandwidth remaining percent 25no bandwidth percent 25 class ftp policy-map Prob20to22 R7(config-pmap)#policy-map Prob20to22no policy-map Prob20to22bandwidth remaining percent 25no bandwidth percent 25 class ftp  R7(config-pmap-c)#class ftp policy-map Prob20to22no policy-map Prob20to22bandwidth remaining percent 25 R7(config-pmap-c)#class telnet R7(config-pmap-c)#class telnetbandwidth remaining percent 25 R7(config-pmap-c)#bandwidth remaining percent 25class telnet bandwidth remaining percent 25class ftp policy-map Prob20to22no policy-map Prob20to22bandwidth remaining percent 25no bandwidth percent 25 class ftp policy-map Prob20to22riority 56 128 class sql  R7(config-pmap-c)#class sqlbandwidth remaining percent 25class telnet bandwidth remaining percent 25class ftp policy-map Prob20to22no policy-map Prob20to22bandwidth remaining percent 25no bandwidth percent 25 class ftp policy-map Prob20to22riority 56 128  R7(config-pmap-c)#class class-f default R7(config-pmap-c)#ban re R7(config-pmap-c)#ban remaining per R7(config-pmap-c)#ban remaining percent 50 R7(config-pmap-c)#int fa 0/0 R7(config-if)#max R7(config-if)#max-reserved-bandwidth 100 R7(config-if)#^Z R7#ash *Mar 1 23:40:02.894: %SYS-5-CONFIG_I: Configured from console by console R7#ash     sh run | b Pol   pol policy-map Prob5 class S5Telnet bandwidth 1000 class JPG shape average 1000000 class S5Other police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob20to22 class ftp bandwidth remaining percent 25 class telnet bandwidth remaining percent 25 class sql priority 56 128 class class-default bandwidth remaining percent 50 ! ! ! ! ! ! --More--  interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex max-reserved-bandwidth 100 ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 speed auto half-duplex vrrp 55 ip 180.40.7.133 glbp 199 ip 180.40.7.134 glbp 199 weighting 100 lower 75 glbp 199 weighting track 1 decrement 50 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 ! --More--   R7#sh pol int fa 0/0 R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/0 R7(config-if)#ser out Prob20to22 R7(config-if)#^Z R7# *Mar 1 23:42:17.907: %SYS-5-CONFIG_I: Configured from console by console R7#config tsh pol int fa 0/0 FastEthernet0/0 Service-policy output: Prob20to22 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp Queueing Output Queue: Conversation 265 Bandwidth remaining 25 (%) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Queueing Output Queue: Conversation 266 Bandwidth remaining 25 (%) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 --More--   Class-map: sql (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Prob21 Queueing Strict Priority Output Queue: Conversation 264 Bandwidth 56 (kbps) Burst 128 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: class-default (match-any) 9 packets, 999 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Output Queue: Conversation 267 Bandwidth remaining 50 (%) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int   pol Prob20to22 R7(config-pmap)#class class-def fault R7(config-pmap-c)#fa R7(config-pmap-c)#fair-queue deconfigure bandwidth before issuing this command in this class R7(config-pmap-c)#no ban R7(config-pmap-c)#no bandwidth r R7(config-pmap-c)#no bandwidth re R7(config-pmap-c)#no bandwidth rep                no band R7(config-pmap-c)#no bandwidth ? R7(config-pmap-c)#no bandwidth R7(config-pmap-c)#no bandwidth fair-queue  R7(config-pmap-c)#^Z R7#config tsh pol int fa 0/0 *Mar 1 23:43:55.319: %SYS-5-CONFIG_I: Configured from console by console R7#sh pol int fa 0/0 FastEthernet0/0 Service-policy output: Prob20to22 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp Queueing Output Queue: Conversation 265 Bandwidth remaining 25 (%) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Queueing Output Queue: Conversation 266 Bandwidth remaining 25 (%) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 --More--   Class-map: sql (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Prob21 Queueing Strict Priority Output Queue: Conversation 264 Bandwidth 56 (kbps) Burst 128 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: class-default (match-any) 22 packets, 2306 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 256 (total queued/total drops/no-buffer drops) 0/0/0 R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int     fair-queue no bandwidth fair-queue class class-defaultpol Prob20to22  R7(config-pmap)#pol Prob20to22fair-queue no bandwidth fair-queue class class-default R7(config-pmap-c)#fa R7(config-pmap-c)#fair-queue ? <16-4096> Number Dynamic Conversation Queues R7(config-pmap-c)#fair-queue 512 R7(config-pmap-c)#^Z R7#sh *Mar 1 23:44:27.447: %SYS-5-CONFIG_I: Configured from console by console R7#sh run config tsh pol int fa 0/0 FastEthernet0/0 Service-policy output: Prob20to22 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp Queueing Output Queue: Conversation 521 Bandwidth remaining 25 (%) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Queueing Output Queue: Conversation 522 Bandwidth remaining 25 (%) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 --More--   Class-map: sql (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Prob21 Queueing Strict Priority Output Queue: Conversation 520 Bandwidth 56 (kbps) Burst 128 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: class-default (match-any) 29 packets, 2862 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 512 (total queued/total drops/no-buffer drops) 0/0/0 R7# sh urn |       run }|  | pol ^ % Invalid input detected at '^' marker. R7# sh run | polbpol pol policy-map Prob5 class S5Telnet bandwidth 1000 class JPG shape average 1000000 class S5Other police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob20to22 class ftp bandwidth remaining percent 25 class telnet bandwidth remaining percent 25 class sql priority 56 128 class class-default fair-queue 512 ! ! ! ! ! ! --More--   R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#pol R7(config)#policy-map Prob23and24 R7(config-pmap)#clas R7(config-pmap)#class ftp R7(config-pmap-c)#pol R7(config-pmap-c)#police 256 ^ % Invalid input detected at '^' marker. R7(config-pmap-c)#police 256   ? <8000-2000000000> Bits per second cir Committed information rate R7(config-pmap-c)#police 256000 R7(config-pmap-c-police)#exit R7(config-pmap-c)#e4xit ^ % Invalid input detected at '^' marker. R7(config-pmap-c)#exit R7(config-pmap)#class telnet R7(config-pmap-c)#pol R7(config-pmap-c)#police 56000 1400 3500           ? <1000-512000000> Burst bytes bc Conform burst conform-action action when rate is less than conform burst pir Peak Information Rate R7(config-pmap-c)#police 56000 14000  ? <1000-512000000> Burst bytes be Excess burst conform-action action when rate is less than conform burst pir Peak Information Rate R7(config-pmap-c)#police 56000 1400 3500   500 com R7(config-pmap-c)#police 56000 1400 3500 com n R7(config-pmap-c)#police 56000 1400 3500 conform-action s R7(config-pmap-c)#police 56000 1400 3500 conform-action set-p R7(config-pmap-c)#police 56000 1400 3500 conform-action set-prec-transmit 1                                                           set pr R7(config-pmap-c)#set precedence ? <0-7> Precedence value cos Set packet precedence from L2 COS critical Set packets with critical precedence (5) flash Set packets with flash precedence (3) flash-override Set packets with flash override precedence (4) immediate Set packets with immediate precedence (2) internet Set packets with internetwork control precedence (6) network Set packets with network control precedence (7) priority Set packets with priority precedence (1) qos-group Set packet precedence from QoS Group. routine Set packets with routine precedence (0) R7(config-pmap-c)#set precedence                pol R7(config-pmap-c)#police 56000 1400 3500 con R7(config-pmap-c)#police 56000 1400 3500 conform-action 1   s R7(config-pmap-c)#police 56000 1400 3500 conform-action set-p R7(config-pmap-c)#police 56000 1400 3500 conform-action set-prec-transmit 1 e R7(config-pmap-c)#$0 conform-action set-prec-transmit 1 exceed-action s R7(config-pmap-c)#$0 conform-action set-prec-transmit 1 exceed-action set-p R7(config-pmap-c)#$-prec-transmit 1 exceed-action set-prec-transmit 0 R7(config-pmap-c-police)#exi R7(config-pmap-c)#exi R7(config-pmap)#class R7(config-pmap)#class class-default R7(config-pmap-c)#fa R7(config-pmap-c)#fair-queue R7(config-pmap-c)#qu R7(config-pmap-c)#queue-limit ? <1-4096> Packets R7(config-pmap-c)#queue-limit 100 R7(config-pmap-c)#int s 1/0.1 R7(config-subif)#serv R7(config-subif)#service-policy out  R7(config-subif)#service-policy out Prob23and24 CBWFQ : Not supported on subinterfaces R7(config-subif)#exit R7(config)#map R7(config)#map-c R7(config)#map-class f R7(config)#map-class frame-relay Provb  b23and24 R7(config-map-class)#ser R7(config-map-class)#service-policy map-class frame-relay Prob23and24exit service-policy out Prob23and24 R7(config-map-class)#int s 1/0.l1  ^ % Invalid input detected at '^' marker. R7(config)#int s 1/0.l 1 R7(config-subif)#fram class Prob23and24 R7(config-subif)#fram class Prob23and24int s 1/0.1    R7(config-if)#fram R7(config-if)#frame-relay traff R7(config-if)#frame-relay traffic-shaping R7(config-if)#^Z R7#sh *Mar 1 23:51:54.604: %SYS-5-CONFIG_I: Configured from console by console R7#sh pol int s 1/0.1 Serial1/0.1: DLCI 703 - Service-policy output: Prob23and24 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp police: cir 256000 bps, bc 8000 bytes conformed 0 packets, 0 bytes; actions: transmit exceeded 0 packets, 0 bytes; actions: drop conformed 0 bps, exceed 0 bps Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet police: cir 56000 bps, bc 1400 bytes conformed 0 packets, 0 bytes; actions: --More--   set-prec-transmit 1 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 0 conformed 0 bps, exceed 0 bps Class-map: class-default (match-any) 1 packets, 84 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 16 (total queued/total drops/no-buffer drops) 0/0/0 R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0 R7(config-if)#int s 1/0 int s 1/0.1 R7(config-subif)#int s 1/0.1 frame-relay traffic-shaping int s 1/0 fram class Prob23and24nfram class Prob23and24ofram class Prob23and24 fram class Prob23and24 R7(config-subif)#do sh run int s 1/0.1 Building configuration... Current configuration : 213 bytes ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network broadcast ip ospf priority 0 frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive end R7(config-subif)# frame-relay interface-dlci 703 R7(config-fr-dlci)#class Prob21an    23and24 R7(config-fr-dlci)#^Z R7#config tsh pol int s 1/0.1 *Mar 1 23:52:45.456: %SYS-5-CONFIG_I: Configured from console by console R7#sh pol int s 1/0.1 Serial1/0.1: DLCI 703 - Service-policy output: Prob23and24 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp police: cir 256000 bps, bc 8000 bytes conformed 0 packets, 0 bytes; actions: transmit exceeded 0 packets, 0 bytes; actions: drop conformed 0 bps, exceed 0 bps Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet police: cir 56000 bps, bc 1400 bytes conformed 0 packets, 0 bytes; actions: --More--   set-prec-transmit 1 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 0 conformed 0 bps, exceed 0 bps Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 16 (total queued/total drops/no-buffer drops) 0/0/0 R7#sh run | b class class-map match-all telnet match protocol telnet class-map match-all S5Other match access-group 1 class-map match-all S5Telnet match access-group 1 match protocol telnet class-map match-any JPG match protocol http mime "*jpeg" match protocol http url "*.jpeg" match protocol http url "*.jpg" match protocol http url "*.jpe" class-map match-all ftp match protocol ftp class-map match-all sql match access-group name Prob21 ! ! policy-map Prob5 class S5Telnet bandwidth 1000 class JPG shape average 1000000 --More--   class S5Other police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob20to22 class ftp bandwidth remaining percent 25 class telnet bandwidth remaining percent 25 class sql priority 56 128 class class-default fair-queue 512 policy-map Prob23and24 class ftp police 256000 class telnet police 56000 1400 3500 conform-action set-prec-transmit 1 exceed-action set-prec-transmit 0 class class-default fair-queue queue-limit 100 ! ! --More--  ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex max-reserved-bandwidth 100 service-policy output Prob20to22 ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 speed auto half-duplex vrrp 55 ip 180.40.7.133 glbp 199 ip 180.40.7.134 glbp 199 weighting 100 lower 75 --More--   glbp 199 weighting track 1 decrement 50 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 ! interface Serial1/0 no ip address encapsulation frame-relay no fair-queue frame-relay traffic-shaping ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network broadcast ip ospf priority 0 frame-relay interface-dlci 703 class Prob23and24 frame-relay ip tcp header-compression passive ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint --More--   frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 protocol ip 180.40.7.162 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 no ip address shutdown ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! --More--  interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ! no ip http server no ip http secure-server ! ip access-list extended Prob21 permit tcp host 87.23.11.123 eq 1433 any permit tcp any host 87.23.11.123 eq 1433 ! ! map-class frame-relay Prob6 --More--   frame-relay priority-group 1 ! map-class frame-relay Prob23and24 service-policy output Prob23and24 access-list 1 permit 208.28.1.2 priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login --More--   R7#config Configuring from terminal, memory, or network [terminal]? Enter configuration commands, one per line. End with CNTL/Z. R7(config)#Pol R7(config)#Policy-map Prob23and24 R7(config-pmap)#class class-deafult % class map class-deafult not configured R7(config-pmap)#class class-deafultfult  % class map class-defult not configured R7(config-pmap)#class class-defultfault R7(config-pmap-c)#po R7(config-pmap-c)#police ? <8000-2000000000> Bits per second cir Committed information rate R7(config-pmap-c)#police 512000 R7(config-pmap-c-police)#exit R7(config-pmap-c)#exit R7(config-pmap)#ma  exit\ ^ % Invalid input detected at '^' marker. R7(config-pmap)#exit R7(config)#map R7(config)#map-c R7(config)#map-class fr R7(config)#map-class frame-relay Prob23and24 R7(config-map-class)#fra R7(config-map-class)#frame-relay cir 600   ? <1-45000000> Applied to both Incoming/Outgoing CIR, Bits per second in Incoming CIR out Outgoing CIR R7(config-map-class)#frame-relay cir 6000 000 R7(config-map-class)#^Z R7# *Mar 1 23:57:41.257: %SYS-5-CONFIG_I: Configured from console by console R7#sh run|    | b Prob23and24 policy-map Prob23and24 class ftp police 256000 class telnet police 56000 1400 3500 conform-action set-prec-transmit 1 exceed-action set-prec-transmit 0 class class-default fair-queue queue-limit 100 police 512000 ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex max-reserved-bandwidth 100 service-policy output Prob20to22 ! --More--   R7#sh run | b map-clas map-class frame-relay Prob6 frame-relay priority-group 1 ! map-class frame-relay Prob23and24 frame-relay cir 600000 service-policy output Prob23and24 access-list 1 permit 208.28.1.2 priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 --More--   R7# RACK12AS>2 [Resuming connection 2 to r2 ... ] R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#class R2(config)#class-map Prob    fra R2(config)#class-map fram R2(config)#class-map fram              map R2(config)#map-cl R2(config)#map-class fr R2(config)#map-class frame-relay Prob25and26 R2(config-map-class)#fram cir 64000 R2(config-map-class)#fra ad R2(config-map-class)#fra adaptive-shaping b R2(config-map-class)#fra adaptive-shaping becn R2(config-map-class)#do sh run | b map-class map-class frame-relay Prob3 frame-relay cir 64000 frame-relay bc 64000 frame-relay be 32000 frame-relay adaptive-shaping becn ! map-class frame-relay Prob25and26 frame-relay cir 64000 frame-relay adaptive-shaping becn access-list 100 deny ospf any any access-list 100 permit ip any any ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous --More--   R2(config-map-class)#int s 1/0.1 R2(config-subif)#farm m class R2(config-subif)#farm class           ram class R2(config-subif)#fram class Prob25and26 R2(config-subif)#^Z R2# *Mar 2 04:09:52.337: %SYS-5-CONFIG_I: Configured from console by console R2#sh run | b 1/0.1 interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network broadcast ip ospf priority 0 frame-relay class Prob25and26 frame-relay interface-dlci 203 ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay class Prob3 frame-relay de-group 1 207 frame-relay interface-dlci 207 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 clock rate 64000 ! interface Serial1/3 --More--   no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! --More--  ip classless ! no ip http server no ip http secure-server ! ! map-class frame-relay Prob3 frame-relay cir 64000 frame-relay bc 64000 frame-relay be 32000 frame-relay adaptive-shaping becn ! map-class frame-relay Prob25and26 frame-relay cir 64000 frame-relay adaptive-shaping becn access-list 100 deny ospf any any access-list 100 permit ip any any ! ! ! ! ! ! --More--   R2#