GTS...


R2#sh run  int s 1/0.2
Building configuration...

Current configuration : 230 bytes
!
interface Serial1/0.2 point-to-point
 ip address 180.40.7.162 255.255.255.224
 ip ospf network point-to-multipoint
 traffic-shape rate 64000 64000 32000 1000
 traffic-shape adaptive 32000
 frame-relay interface-dlci 207
end

R2#


R2(config-subif)#do sh traff

Interface   Se1/0.2
       Access Target    Byte   Sustain   Excess    Interval  Increment Adapt
VC     List   Rate      Limit  bits/int  bits/int  (ms)      (bytes)   Active
-             64000     12000  64000     32000     1000      8000      BECN
R2(config-subif)#


FTS --------------------------------------------------------------------------------------

R2#sh run | b 1/0
interface Serial1/0
 no ip address
 encapsulation frame-relay
 no fair-queue
 frame-relay traffic-shaping
!
interface Serial1/0.1 point-to-point
 ip address 180.40.7.67 255.255.255.224
 ip ospf network point-to-multipoint
 frame-relay interface-dlci 203
!
interface Serial1/0.2 point-to-point
 ip address 180.40.7.162 255.255.255.224
 ip ospf network point-to-multipoint
 frame-relay class Prob3
 frame-relay interface-dlci 207
!
!
map-class frame-relay Prob3
 frame-relay cir 64000
 frame-relay bc 64000
 frame-relay be 32000
 frame-relay adaptive-shaping becn
!
!


R2#sh traff

Interface   Se1/0
       Access Target    Byte   Sustain   Excess    Interval  Increment Adapt
VC     List   Rate      Limit  bits/int  bits/int  (ms)      (bytes)   Active
201           56000     875    7000      0         125       875       -

Interface   Se1/0.1
       Access Target    Byte   Sustain   Excess    Interval  Increment Adapt
VC     List   Rate      Limit  bits/int  bits/int  (ms)      (bytes)   Active
203           56000     875    7000      0         125       875       -

Interface   Se1/0.2
       Access Target    Byte   Sustain   Excess    Interval  Increment Adapt
VC     List   Rate      Limit  bits/int  bits/int  (ms)      (bytes)   Active
207           64000     5000   64000     32000     125       1000      BECN
R2#


OSPF DE thing---------------------------------------------------------------------------


R2#sh run | b de-list
frame-relay de-list 1 protocol ip list 100
!
interface Serial1/0.2 point-to-point
 ip address 180.40.7.162 255.255.255.224
 ip ospf network point-to-multipoint
 frame-relay class Prob3
 frame-relay de-group 1 207
 frame-relay interface-dlci 207
!
access-list 100 deny   ospf any any
access-list 100 permit ip any any
!


R2#sh fram pvc 207

PVC Statistics for interface Serial1/0 (Frame Relay DTE)

DLCI = 207, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.2

  input pkts 4640          output pkts 4645         in bytes 776184
  out bytes 777756         dropped pkts 0           in pkts dropped 0
  out pkts dropped 0                out bytes dropped 0
  in FECN pkts 0           in BECN pkts 0           out FECN pkts 0
  out BECN pkts 0          in DE pkts 0             out DE pkts 10  <-------------------
  out bcast pkts 4147      out bcast bytes 724788
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
  Shaping adapts to BECN
  pvc create time 23:01:24, last time pvc status changed 23:00:53
  cir 64000     bc 64000     be 32000     byte limit 5000   interval 125
  mincir 32000     byte increment 1000  Adaptive Shaping BECN
  pkts 52        bytes 8112      pkts delayed 0         bytes delayed 0
  shaping inactive
  traffic shaping drops 0
  Queueing strategy: fifo
  Output queue 0/40, 0 drop, 0 dequeued
R2#