=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2007.01.24 11:14:38 =~=~=~=~=~=~=~=~=~=~=~= RACK15AS>4 [Resuming connection 4 to r4 ... ] R4#confi t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int lo 0 R4(config-if)#ip add 100.1.1.1 255.255.255.0 R4(config-if)#^Z R4# *Mar 2 00:03:32.594: %SYS-5-CONFIG_I: Configured from console by console R4# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip access-list Pro   ex Prob1a R3(config-ext-nacl)#per icmp 1 host 100.11.  .1.1 hho  ost 20.10.1.2 echo R3(config-ext-nacl)#per icmp host 100.1.1.1 host 20.10.1.2 echoip access-list ex Prob1a  b R3(config-ext-nacl)#ip access-list ex Prob1bper icmp host 100.1.1.1 host 20.10.1.2 echo echo 1 echo R3(config-ext-nacl)#per icmp host 100.1.1.1 host 20.10.1.1 echoip access-list ex Prob1b  c R3(config-ext-nacl)#ip access-list ex Prob1cper icmp host 100.1.1.1 host 20.10.1.1 echo echo 0 echo echo0 echo. echo0 echo. echo0 echo. echo2 echo5 echo5 echo 20.10.1.0 0.0.0.255 echo  20.10.1.0 0.0.0.255 echo  20.10.1.0 0.0.0.255 echo  20.10.1.0 0.0.0.255 echo 20.10.1.0 0.0.0.255 echo  R3(config-ext-nacl)#exit R3(config)#route-map Prob1 R3(config-route-map)#match ip ad d  d Prob1c R3(config-route-map)#match le R3(config-route-map)#match length ? <0-2147483647> Minimum packet length R3(config-route-map)#match length ? <0-2147483647> Minimum packet length R3(config-route-map)#match length 1q0  001 ? <0-2147483647> Maximum packet length R3(config-route-map)#match length 1001 2147483647 R3(config-route-map)#set ip ? address Specify IP address default Set default information df Set DF bit next-hop Next hop address precedence Set precedence field qos-group Set QOS Group ID tos Set type of service field R3(config-route-map)#set ip he R3(config-route-map)#set ip he? % Unrecognized command R3(config-route-map)#set ip he  ne R3(config-route-map)#set ip next-hop ? A.B.C.D IP address of next hop peer-address Use peer address (for BGP only) verify-availability Verify if nexthop is a CDP neighbor R3(config-route-map)#set ip next-hop            n R3(config-route-map)#set interface ? Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Null Null interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-Template Virtual Template interface Virtual-TokenRing Virtual TokenRing R3(config-route-map)#set interface s 1/2 ? Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Null Null interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-Template Virtual Template interface Virtual-TokenRing Virtual TokenRing R3(config-route-map)#set interface s 1/2 R3(config-route-map)#exit R3(config)#exitset interface s 1/2 match length 1001 2147483647ip add Prob1c  route-map Prob1  10 R3(config-route-map)#route-map Prob1 10  20 R3(config-route-map)#match i ip add Prov c b1b R3(config-route-map)#set ip nex R3(config-route-map)#set ip next-hop ? A.B.C.D IP address of next hop peer-address Use peer address (for BGP only) verify-availability Verify if nexthop is a CDP neighbor R3(config-route-map)#set ip next-hop 180.40.7.1 2 R3(config-route-map)#set ip next-hop 180.40.7.2match ip add Prob1b route-map Prob1 20   30 R3(config-route-map)#route-map Prob1 30set ip next-hop 180.40.7.2match ip add Prob1b  a R3(config-route-map)#match ip add Prob1aroute-map Prob1 30 set ip next-hop 180.40.7.2 67 R3(config-route-map)#set ip next-hop 180.40.7.67match ip add Prob1a route-map Prob1 30   40 R3(config-route-map)#int fa 0/0 R3(config-if)#ip po R3(config-if)#ip policy r R3(config-if)#ip policy route-map           ? route-map Policy route map R3(config-if)#ip policy rou R3(config-if)#ip policy route-map ? WORD Route map name R3(config-if)#ip policy route-map Prob1 R3(config-if)#^Z R3# *Mar 2 00:16:45.124: %SYS-5-CONFIG_I: Configured from console by console R3# RACK15AS>4 [Resuming connection 4 to r4 ... ] R4#sh ip  route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/793] via 180.40.7.129, 00:16:46, FastEthernet0/0 [110/793] via 180.40.7.131, 00:16:46, FastEthernet0/0 O 20.10.1.0 [110/783] via 180.40.7.129, 00:16:46, FastEthernet0/0 [110/783] via 180.40.7.131, 00:16:46, FastEthernet0/0 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:16:46, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/782] via 180.40.7.129, 00:16:47, FastEthernet0/0 [110/782] via 180.40.7.131, 00:16:47, FastEthernet0/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:16:47, FastEthernet0/0 --More--   R4# RACK15AS>7 [Resuming connection 7 to r7 ... ] R7#conf t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/1 R7(config-if)#shut R7(config-if)# RACK15AS>4 [Resuming connection 4 to r4 ... ] R4#clea ip ospf pr Reset ALL OSPF processes? [no]: y R4# *Mar 2 00:20:28.409: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 00:20:28.409: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R4# *Mar 2 00:20:35.581: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from LOADING to FULL, Loading Done R4#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 180.40.0.0/27 is subnetted, 1 subnets C 180.40.7.128 is directly connected, FastEthernet0/0 R4#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 180.40.0.0/27 is subnetted, 1 subnets C 180.40.7.128 is directly connected, FastEthernet0/0 R4#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/793] via 180.40.7.129, 00:00:01, FastEthernet0/0 O 20.10.1.0 [110/783] via 180.40.7.129, 00:00:01, FastEthernet0/0 O 208.28.1.0/24 [110/783] via 180.40.7.129, 00:00:01, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/782] via 180.40.7.129, 00:00:02, FastEthernet0/0 O 180.40.7.161/32 [110/782] via 180.40.7.129, 00:00:02, FastEthernet0/0 O 180.40.7.0/27 [110/782] via 180.40.7.129, 00:00:02, FastEthernet0/0 O 180.40.7.67/32 [110/782] via 180.40.7.129, 00:00:02, FastEthernet0/0 O 180.40.7.66/32 [110/1] via 180.40.7.129, 00:00:02, FastEthernet0/0 --More--   R4# RACK15AS>3 [Resuming connection 3 to r3 ... ] *M R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#logg buff R3(config)#^Z R3#deb ip *Mar 2 00:19:01.031: %SYS-5-CONFIG_I: Configured from console by console R3#deb ip pol R3#deb ip policy Policy routing debugging is on R3# R3# R3# R3# R3# RACK15AS>4 [Resuming connection 4 to r4 ... ] R4#ping 1 20.10.1.2 sou 20  100.1.1.1 ? data specify data pattern df-bit enable do not fragment bit in IP header repeat specify repeat count size specify datagram size timeout specify timeout interval validate validate reply data R4#ping 20.10.1.2 sou 100.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 48/52/68 ms R4# RACK15AS>3 [Resuming connection 3 to r3 ... ] *Mar 2 00:19:27.342: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:19:27.342: IP: FastEthernet0/0 to Serial1/0 R3#180.40.7.67 *Mar 2 00:19:27.390: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:19:27.390: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:19:27.394: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:19:27.394: IP: route map Prob1, item 30, permit *Mar 2 00:19:27.394: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:19:27.394: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 2 00:19:27.442: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:19:27.442: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:19:27.442: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:19:27.442: IP: route map Prob1, item 30, permit *Mar 2 00:19:27.442: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:19:27.442: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 2 00:19:27.490: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:19:27.490: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:19:27.490: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:19:27.494: IP: route map Prob1, item 30, permit *Mar 2 00:19:27.494: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:19:27.494: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 R3# R3# RACK15AS>4 [Resuming connection 4 to r4 ... ] R4#ping 20.10.1.2 sou 100.1.1.1  sou 100.1.1.1 1 sou 100.1.1.1  Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.1, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 32/33/36 ms R4# RACK15AS>3 [Resuming connection 3 to r3 ... ] *Mar 2 00:20:2 *Mar 2 00:20:26.863: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, FIB policy match *Mar 2 00:20:26.867: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, g=180.40.7.2, len 100, FIB policy routed *Mar 2 00:20:26.899: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, len 100, FIB policy match *Mar 2 00:20:26.899: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.1, g=180.40.7.2, len 100, FIB policy routed R3# R3# RACK15AS>4 [Resuming connection 4 to r4 ... ] R4#ping 20.10.1.1 sou 100.1.1.1 2 sou 100.1.1.1 size 15 400 Type escape sequence to abort. Sending 5, 1400-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !! RACK15AS>3 [Resuming connection 3 to r3 ... ] *Ma100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, FIB policy match *Mar 2 00:21:10.727: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, FIB policy routed R3# R3# *Mar 2 00:21:11.088: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, FIB policy match *Mar 2 00:21:11.088: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, FIB policy routed *Mar 2 00:21:11.448: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, FIB policy match *Mar 2 00:21:11.452: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, FIB policy routed R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#no ip cef R3(config)# RACK15AS>4 [Resuming connection 4 to r4 ... ] !! R4#ping 20.10.1.2 sou 100.1.1.1 size 1400 Type escape sequence to abort. Sending 5, 1400-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !! RACK15AS>3 [Resuming connection 3 to r3 ... ] *MastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 2 00:21:35.556: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, policy match *Mar 2 00:21:35.556: IP: route map Prob1, item 10, permit *Mar 2 00:21:35.556: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, policy routed *Mar 2 00:21:35.556: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 R3(config)# R3(config)# *Mar 2 00:21:35.917: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, policy match *Mar 2 00:21:35.917: IP: route map Prob1, item 10, permit *Mar 2 00:21:35.917: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, policy routed *Mar 2 00:21:35.921: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 *Mar 2 00:21:36.281: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, policy match *Mar 2 00:21:36.281: IP: route map Prob1, item 10, permit *Mar 2 00:21:36.281: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, policy routed *Mar 2 00:21:36.281: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 R3(config)# *Mar 2 00:21:36.642: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, policy match *Mar 2 00:21:36.642: IP: route map Prob1, item 10, permit *Mar 2 00:21:36.642: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, policy routed *Mar 2 00:21:36.646: IP: FastEthernet0/0 to Serial1/2 180.40.7.2 R3(config)#p cefip cef R3(config)#^Z R3# *Mar 2 00:22:15.734: PR-RP: Set FastEthernet0/0 policy_routemap=Prob1; cached_map=Prob1 *Mar 2 00:22:15.754: PR-RP: Set FastEthernet0/0 policy_routemap=Prob1; cached_map=Prob1 R RACK15AS>4 [Resuming connection 4 to r4 ... ] !!ping 20.10.1.2 sou 100.1.1.1 size 1400 Type escape sequence to abort. Sending 5, 1400-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!! RACK15AS>3 [Resuming connection 3 to r3 ... ] *Ma *Mar 2 00:22:20.454: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, FIB policy match *Mar 2 00:22:20.454: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, FIB policy routed *Mar 2 00:22:20.814: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, FIB policy match *Mar 2 00:22:20.814: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, FIB policy routed *Mar 2 00:22:21.175: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, FIB policy match *Mar 2 00:22:21.179: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, FIB policy routed R3# R3# *Mar 2 00:22:21.539: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, FIB policy match *Mar 2 00:22:21.539: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, FIB policy routed *Mar 2 00:22:21.900: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 1400, FIB policy match *Mar 2 00:22:21.900: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/2), len 1400, FIB policy routed R3# RACK15AS>4 [Resuming connection 4 to r4 ... ] !! R4#ping 20.10.1.2 sou 100.1.1.1 size 14001 sou 100.1.1.1 2 sou 100.1.1.1 sh ip route ping 20.10.1.2 sou 100.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 48/53/68 ms R4# RACK15AS>3 [Resuming connection 3 to r3 ... ] *M, len 100, FIB policy match *Mar 2 00:22:33.359: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:22:33.359: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:22:33.359: IP: route map Prob1, item 30, permit *Mar 2 00:22:33.359: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:22:33.359: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 2 00:22:33.407: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:22:33.407: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:22:33.407: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:22:33.411: IP: route map Prob1, item 30, permit *Mar 2 00:22:33.411: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:22:33.411: IP: FastEthernet0/0 to Serial1/0 R3# R3#180.40.7.67 *Mar 2 00:22:33.455: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:22:33.459: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:22:33.459: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:22:33.459: IP: route map Prob1, item 30, permit *Mar 2 00:22:33.459: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:22:33.459: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 2 00:22:33.523: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:22:33.523: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:22:33.527: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:22:33.527: IP: route map Prob1, item 30, permit *Mar 2 00:22:33.527: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:22:33.527: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 *Mar 2 00:22:33.575: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:22:33.575: CEF-IP-POLICY: fib for address 180.40.7.67 is with flag 0 *Mar 2 00:22:33.575: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2, len 100, policy match *Mar 2 00:22:33.575: IP: route map Prob1, item 30, permit *Mar 2 00:22:33.575: IP: s=100.1.1.1 (FastEthernet0/0), d=20.10.1.2 (Serial1/0), len 100, policy routed *Mar 2 00:22:33.579: IP: FastEthernet0/0 to Serial1/0 180.40.7.67 R3# R3# RACK15AS>4 [Resuming connection 4 to r4 ... ] R4#ping ip Target IP address: 20.1.1.2    0.1.2 Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y Source address or interface: loo 1 % Invalid source. Must use IP address or full interface name without spaces (e.g. Serial0/1) Source address or interface: 100.1.1.1 Type of service [0]: Set DF bit in IP header? [no]: Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: r Number of hops [ 9 ]: Loose, Strict, Record, Timestamp, Verbose[RV]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 Packet has IP options: Total option bytes= 39, padded length=40 Record route: <*> (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) (0.0.0.0) Reply to request 0 (52 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.66) (20.10.1.1) (20.10.1.2) (20.10.1.2) (180.40.7.2) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) End of list Reply to request 1 (64 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.1) (20.10.1.1) (20.10.1.2) (20.10.1.2) (180.40.7.67) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) End of list Reply to request 2 (52 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.66) (20.10.1.1) (20.10.1.2) (20.10.1.2) (180.40.7.2) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) End of list Reply to request 3 (64 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.1) (20.10.1.1) (20.10.1.2) (20.10.1.2) (180.40.7.67) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) End of list Reply to request 4 (52 ms). Received packet has options Total option bytes= 40, padded length=40 Record route: (180.40.7.130) (180.40.7.66) (20.10.1.1) (20.10.1.2) (20.10.1.2) (180.40.7.2) (180.40.7.129) (100.1.1.1) <*> (0.0.0.0) End of list Success rate is 100 percent (5/5), round-trip min/avg/max = 52/56/64 ms R4#q r100.1.1.1loo 1 y 20.10.1.2ping ip 20.10.1.2 sou 100.1.1.1                 2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/46/48 ms R4# RACK15AS>3 [Resuming connection 3 to r3 ... ] *Mar 2 100, FIB policy match *Mar 2 00:28:03.111: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding *Mar 2 00:28:03.159: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:28:03.159: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding *Mar 2 00:28:03.207: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:28:03.207: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding R3# R3# *Mar 2 00:28:03.256: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:28:03.256: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding *Mar 2 00:28:03.304: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy match *Mar 2 00:28:03.304: IP: s=180.40.7.130 (FastEthernet0/0), d=20.10.1.2, len 100, FIB policy rejected - normal forwarding R3#sh run Building configuration... Current configuration : 2031 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! boot-start-marker boot-end-marker ! logging buffered 4096 debugging ! no network-clock-participate slot 1 no network-clock-participate wic 0 no aaa new-model ip subnet-zero ! ! ! ip cef --More--  no ip domain lookup ip audit po max-events 100 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface FastEthernet0/0 --More--   R3#sh run | b Fa interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network point-to-multipoint frame-relay map ip 180.40.7.65 307 broadcast frame-relay map ip 180.40.7.67 302 broadcast ! --More--  interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! --More--  interface Serial1/7 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ! no ip http server no ip http secure-server ! ip access-list extended Prob1a permit icmp host 100.1.1.1 host 20.10.1.2 echo ip access-list extended Prob1b permit icmp host 100.1.1.1 host 20.10.1.1 echo ip access-list extended Prob1c permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo ! ! route-map Prob1 permit 10 match ip address Prob1c --More--   match length 1001 2147483647 set interface Serial1/2 ! route-map Prob1 permit 20 match ip address Prob1b set ip next-hop 180.40.7.2 ! route-map Prob1 permit 30 match ip address Prob1a set ip next-hop 180.40.7.67 ! route-map Prob1 permit 40 ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 --More--   R3# RACK15AS>7 [Resuming connection 7 to r7 ... ] *Mar 2 R7(config-if)#no shut R7(config-if)#^Z R7# *Mar 2 00:29:29.661: %SYS-5-CONFIG_I: Configured from console by console R7# *Mar 2 00:29:31.352: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up *Mar 2 00:29:32.354: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up R7# *Mar 2 00:30:16.362: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/1 from LOADING to FULL, Loading Done *Mar 2 00:30:16.370: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/1 from LOADING to FULL, Loading Done R7# RACK15AS>4 [Resuming connection 4 to r4 ... ] * R4#confi t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#ip access-list ex Prov c b2 R4(config-ext-nacl)#per icmp any any any     ex cho R4(config-ext-nacl)#exit R4(config)#router   -map Prob2 R4(config-route-map)#match ip add Prob2 R4(config-route-map)#set ip nex R4(config-route-map)#set ip next-hop 180.40.7.129 R4(config-route-map)#exit R4(config)#ip lo R4(config)#ip local ? policy Enable policy routing pool IP Local address pool lists R4(config)#ip local p R4(config)#ip local po? policy pool R4(config)#ip local pol R4(config)#ip local policy ? route-map Policy route map R4(config)#ip local policy rou R4(config)#ip local policy route-map > ? WORD Route map name R4(config)#ip local policy route-map Prob2 R4(config)#^Z R4# *Mar 2 00:36:14.129: %SYS-5-CONFIG_I: Configured from console by console R4#deb ip pol R4#deb ip policy Policy routing debugging is on R4#deb ip policy confi t ping 20.10.1.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 64/69/92 ms R4# *Mar 2 00:36:23.205: IP: s=180.40.7.130 (local), d=20.10.1.2, len 100, policy match *Mar 2 00:36:23.209: IP: route map Prob2, item 10, permit *Mar 2 00:36:23.209: IP: s=180.40.7.130 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 00:36:23.209: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 00:36:23.269: IP: s=180.40.7.130 (local), d=20.10.1.2, len 100, policy match *Mar 2 00:36:23.273: IP: route map Prob2, item 10, permit *Mar 2 00:36:23.273: IP: s=180.40.7.130 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 00:36:23.273: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 00:36:23.333: IP: s=180.40.7.130 (local), d=20.10.1.2, len 100, policy match *Mar 2 00:36:23.337: IP: route map Prob2, item 10, permit *Mar 2 00:36:23.337: IP: s=180.40.7.130 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 00:36:23.337: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 00:36:23.397: IP: s=180.40.7.130 (local), R4# d=20.10.1.2, len 100, policy match *Mar 2 00:36:23.401: IP: route map Prob2, item 10, permit *Mar 2 00:36:23.401: IP: s=180.40.7.130 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 00:36:23.401: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 00:36:23.461: IP: s=180.40.7.130 (local), d=20.10.1.2, len 100, policy match *Mar 2 00:36:23.465: IP: route map Prob2, item 10, permit *Mar 2 00:36:23.465: IP: s=180.40.7.130 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 00:36:23.465: IP: local to FastEthernet0/0 180.40.7.129 R4#ping 20.10.1.2deb ip policy confi t ping 20.10.1.2r 100.1.1.1loo 1 y 20.10.1.2ping ip 20.10.1.2 sou 100.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 20.10.1.2, timeout is 2 seconds: Packet sent with a source address of 100.1.1.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 64/67/68 ms R4# *Mar 2 00:36:44.269: IP: s=100.1.1.1 (local), d=20.10.1.2, len 100, policy match *Mar 2 00:36:44.269: IP: route map Prob2, item 10, permit *Mar 2 00:36:44.269: IP: s=100.1.1.1 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 00:36:44.269: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 00:36:44.333: IP: s=100.1.1.1 (local), d=20.10.1.2, len 100, policy match *Mar 2 00:36:44.333: IP: route map Prob2, item 10, permit *Mar 2 00:36:44.333: IP: s=100.1.1.1 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 00:36:44.337: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 00:36:44.401: IP: s=100.1.1.1 (local), d=20.10.1.2, len 100, policy match *Mar 2 00:36:44.401: IP: route map Prob2, item 10, permit *Mar 2 00:36:44.401: IP: s=100.1.1.1 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 00:36:44.401: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 00:36:44.469: IP: s=100.1.1.1 (local), d=20.10.1.2, len 100 R4#, policy match *Mar 2 00:36:44.469: IP: route map Prob2, item 10, permit *Mar 2 00:36:44.469: IP: s=100.1.1.1 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 00:36:44.469: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 00:36:44.533: IP: s=100.1.1.1 (local), d=20.10.1.2, len 100, policy match *Mar 2 00:36:44.533: IP: route map Prob2, item 10, permit *Mar 2 00:36:44.533: IP: s=100.1.1.1 (local), d=20.10.1.2 (FastEthernet0/0), len 100, policy routed *Mar 2 00:36:44.537: IP: local to FastEthernet0/0 180.40.7.129 R4# R4# R4# R4# R4#p 1.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds: U *Mar 2 00:36:56.553: IP: s=100.1.1.1 (local), d=1.1.1.1, len 100, policy match *Mar 2 00:36:56.553: IP: route map Prob2, item 10, permit *Mar 2 00:36:56.553: IP: s=100.1.1.1 (local), d=1.1.1.1 (FastEthernet0/0), len 100, policy routed *Mar 2 00:36:56.553: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 00:36:56.561: IP: s=100.1.1.1 (local), d=1.1.1.1, len 100, policy match *Mar 2 00:36:56.561: IP: route map Prob2, item 10, permit *Mar 2 00:36:56.561: IP: s=100.1.1.1 (local), d=1.1.1.1 (FastEthernet0/0), len 100, policy routed *Mar 2 00:36:56.565: IP: local to FastEthernet0/0 180.40.7.129.U *Mar 2 00:36:58.561: IP: s=100.1.1.1 (local), d=1.1.1.1, len 100, policy match *Mar 2 00:36:58.561: IP: route map Prob2, item 10, permit *Mar 2 00:36:58.561: IP: s=100.1.1.1 (local), d=1.1.1.1 (FastEthernet0/0), len 100, policy routed *Mar 2 00:36:58.561: IP: local to FastEthernet0/0 180.40.7.129 *Mar 2 00:36:58.569: IP: s=100.1.1.1 (local), d=1.1.1.1, len 100, policy match *Mar 2 00:36:58.569: IP: route map Prob2, item 10, permit *Mar 2 00:36:58.569: IP: s=100.1.1.1 (local), d=1.1.1.1 (FastEthernet0/0), len 100, policy routed *Mar 2 00:36:58.569: IP: local to FastEthernet0/0 180.40.7.129.U Success rate is 0 percent (0/5) R4# *Mar 2 00:37:00.569: IP: s=100.1.1.1 (local), d=1.1.1.1, len 100, policy match *Mar 2 00:37:00.569: IP: route map Prob2, item 10, permit *Mar 2 00:37:00.569: IP: s=100.1.1.1 (local), d=1.1.1.1 (FastEthernet0/0), len 100, policy routed *Mar 2 00:37:00.569: IP: local to FastEthernet0/0 180.40.7.129 R4#u all All possible debugging has been turned off R4#sh ru | b ip L lo % Ambiguous command: "sh ru " R4#sh ru | b ip lon | b ip lo ip local policy route-map Prob2 no ip http server no ip http secure-server ip classless ! ! ! ip access-list extended Prob2 permit icmp any any echo ! route-map Prob2 permit 10 match ip address Prob2 set ip next-hop 180.40.7.129 ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 --More--   R4# RACK15AS>2 [Resuming connection 2 to r2 ... ] R2#confit Translating "confit" Translating "confit" % Unknown command or computer name, or unable to find computer address R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 0 1/0.2 R2(config-subif)#g? % Unrecognized command R2(config-subif)#g tr R2(config-subif)#traffic-shape ? adaptive Enable Traffic Shaping adaptation to BECN fecn-adapt Enable Traffic Shaping reflection of FECN as BECN group configure token bucket: group CIR (bps) [Bc (bits) [Be (bits)]] rate configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]] R2(config-subif)#traffic-shape rate ? <8000-100000000> Target Bit Rate (bits per second) R2(config-subif)#traffic-shape rate 64000 ? <0-100000000> bits per interval, sustained R2(config-subif)#traffic-shape rate 64000 64000 ? <0-100000000> bits per interval, excess in first interval R2(config-subif)#traffic-shape rate 64000 64000 342  2000 ? <0-4096> Set buffer limit R2(config-subif)#traffic-shape rate 64000 64000 32000 R2(config-subif)#do sh rt  taffi sh taffi ^ % Invalid input detected at '^' marker. R2(config-subif)#do sh taffific     raffic Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active - 64000 12000 64000 32000 1000 8000 - R2(config-subif)#traf R2(config-subif)#traffic-shape ? adaptive Enable Traffic Shaping adaptation to BECN fecn-adapt Enable Traffic Shaping reflection of FECN as BECN group configure token bucket: group CIR (bps) [Bc (bits) [Be (bits)]] rate configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]] R2(config-subif)#traffic-shape BECN ? % Unrecognized command R2(config-subif)#traffic-shape BECN      ad R2(config-subif)#traffic-shape adaptive ? <1-100000000> Lower Bound Target Bit Rate (bits per second) R2(config-subif)#traffic-shape adaptive 32000 ? R2(config-subif)#traffic-shape adaptive 32000 R2(config-subif)#traffic-shape adaptive 32000 do sh traffic affi  sh taffi ^ % Invalid input detected at '^' marker. R2(config-subif)#do sh taffiraffi Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active - 64000 12000 64000 32000 1000 8000 BECN R2(config-subif)#do sh run int s 1/0.1 Building configuration... Current configuration : 156 bytes ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 203 end R2(config-subif)#do sh run int s 1/0.1traffi affi traffic-shape adaptive 32000 Ano    ntraffic-shape adaptive 32000 Aotraffic-shape adaptive 32000 A traffic-shape adaptive 32000 A R2(config-subif)#no traffic-shape adaptive 32000 Ado sh run int s 1/0.1 traffi affi traffic-shape adaptive 32000 do sh traffic affi traffic-shape rate 64000 64000 32000 ntraffic-shape rate 64000 64000 32000 otraffic-shape rate 64000 64000 32000  traffic-shape rate 64000 64000 32000  R2(config-subif)#] exit R2(config)#map R2(config)#map-cl R2(config)#map-class ? atm Asynchronous transfer mode dialer Dial on Demand frame-relay Frame Relay R2(config)#map-class frm am R2(config)#map-class frame-relay ? WORD Static map class name R2(config)#map-class frame-relay Prob3 R2(config-map-class)#fram ? adaptive-shaping Adaptive traffic rate adjustment, Default = none bc Committed burst size (Bc), Default = 7000 bits be Excess burst size (Be), Default = 0 bits cir Committed Information Rate (CIR), Default = 56000 bps congestion Congestion management parameters custom-queue-list VC custom queueing end-to-end Configure frame-relay end-to-end VC parameters fair-queue VC fair queueing fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fragment fragmentation - Requires Frame Relay traffic-shaping to be configured at the interface level holdq Hold queue size for VC idle-timer Idle timeout for a SVC, Default = 120 sec interface-queue PVC interface queue parameters ip Assign a priority queue for RTP streams mincir Minimum acceptable CIR, Default = CIR/2 bps priority-group VC priority queueing tc Policing Measurement Interval (Tc) traffic-rate VC traffic rate voice voice options R2(config-map-class)#fram cir R2(config-map-class)#fram cir 64000 ? R2(config-map-class)#fram cir 64000 R2(config-map-class)#fram bc ? <300-16000000> Applied to both Incoming/Outgoing Bc, Bits in Incoming Bc out Outgoing Bc R2(config-map-class)#fram bc 64000 R2(config-map-class)#fram bc 64000       e 32000 R2(config-map-class)#fra ad R2(config-map-class)#fra adaptive-shaping ? becn Enable rate adjustment in response to BECN foresight Enable rate adjustment in response to ForeSight messages and BECN interface-congestion Enable rate adjustment depend on interface queue R2(config-map-class)#fra adaptive-shaping becn ? R2(config-map-class)#fra adaptive-shaping becn R2(config-map-class)#int s 1/0.2 R2(config-subif)#do sh run int s 1/0.2 Building configuration... Current configuration : 157 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 207 end R2(config-subif)# frame-relay interface-dlci 207 R2(config-fr-dlci)#class Proc b3 R2(config-fr-dlci)#do sh traff R2(config-fr-dlci)#int s 1/0 R2(config-if)#fram R2(config-if)#frame-relay traff R2(config-if)#frame-relay traffic-shaping R2(config-if)#frame-relay traffic-shaping int s 1/0 do sh traff Interface Se1/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 201 56000 875 7000 0 125 875 - Interface Se1/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 203 56000 875 7000 0 125 875 - Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 207 64000 5000 64000 32000 125 1000 BECN R2(config-if)#do sh traffframe-relay traffic-shaping int s 1/0 do sh traffclass Prob3 frame-relay interface-dlci 207do sh run int s 1/0.2 int s 1/0.2 fra adaptive-shaping becn m be 32000 c 64000cir 64000 map-class frame-relay Prob3 R2(config-map-class)#fram tc ? <10-10000> Tc, milliseconds R2(config-map-class)#fram tc 1000 R2(config-map-class)#fram tc 1000map-class frame-relay Prob3do sh traff  Interface Se1/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 201 56000 875 7000 0 125 875 - Interface Se1/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 203 56000 875 7000 0 125 875 - Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 207 64000 5000 64000 32000 125 1000 BECN R2(config-map-class)#do sh trafffram tc 1000 1000 e 1000 ^ % Invalid input detected at '^' marker. R2(config-map-class)#fram te 1000      ? tc traffic-rate R2(config-map-class)#fram t      do sh trafffram tc 1000nfram tc 1000ofram tc 1000 fram tc 1000 R2(config-map-class)#^Z R2# *Mar 2 00:58:09.949: %SYS-5-CONFIG_I: Configured from console by console R2#sh run | b 1/0 interface Serial1/0 no ip address encapsulation frame-relay no fair-queue frame-relay traffic-shaping ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 203 ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 207 class Prob3 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 --More--   clock rate 64000 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 --More--   log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ! no ip http server no ip http secure-server ! ! map-class frame-relay Prob3 frame-relay cir 64000 frame-relay bc 64000 frame-relay be 32000 frame-relay adaptive-shaping becn ! ! ! ! ! ! ! ! ! --More--   R2#sh traff R2#sh traffic-shape Interface Se1/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 201 56000 875 7000 0 125 875 - Interface Se1/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 203 56000 875 7000 0 125 875 - Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 207 64000 5000 64000 32000 125 1000 BECN R2# R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0 R2(config-if)#no fram R2(config-if)#no frame-relay tr R2(config-if)#no frame-relay tra % Ambiguous command: "no frame-relay tra" R2(config-if)#no frame-relay traff R2(config-if)#no frame-relay traffic-shaping R2(config-if)#int s 1/0.2 R2(config-subif)#traff R2(config-subif)#traffic-shape rate 64000 64000 32000 R2(config-subif)#traff   R2(config-subif)#traffic-shape ad R2(config-subif)#traffic-shape adaptive 32000 R2(config-subif)#do sh run int s 1/0.2 Building configuration... Current configuration : 244 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint traffic-shape rate 64000 64000 32000 1000 traffic-shape adaptive 32000 frame-relay interface-dlci 207 class Prob3 end R2(config-subif)#do sh run int s 1/0.2traffic-shape adaptive 32000ntraffic-shape adaptive 32000otraffic-shape adaptive 32000 traffic-shape adaptive 32000 R2(config-subif)#no traffic-shape adaptive 32000do sh run int s 1/0.2 traffic-shape adaptive 32000rate 64000 64000 32000ntraffic-shape rate 64000 64000 32000otraffic-shape rate 64000 64000 32000 traffic-shape rate 64000 64000 32000 R2(config-subif)#no traffic-shape rate 64000 64000 32000adaptive 32000 do sh run int s 1/0.2 traffic-shape adaptive 32000rate 64000 64000 32000int s 1/0.2 no frame-relay traffic-shaping int s 1/0.2   % Incomplete command. R2(config)#int s 1/0.  R2(config-if)#t fram traff R2(config-if)#fram traffic-shaping R2(config-if)#^Z R2# *Mar 2 01:01:09.283: %SYS-5-CONFIG_I: Configured from console by console R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#fram de R2(config)#fram de-list ? <1-10> DE list numbers R2(config)#fram de-list 1 ? interface Identify packets from a named interface protocol Identify packets by protocol R2(config)#fram de-list 1 pr R2(config)#fram de-list 1 protocol ? appletalk AppleTalk arp IP ARP bridge Bridging clns ISO CLNS clns_es ISO CLNS End System clns_is ISO CLNS Intermediate System compressedtcp Compressed TCP decnet DECnet decnet_node DECnet Node decnet_router-l1 DECnet Router L1 decnet_router-l2 DECnet Router L2 ip IP ipx Novell IPX R2(config)#fram de-list 1 protocol ip ? fragments Classify fragmented IP packets gt Identify packets greater than a specified size list To specify an access list lt Identify packets less than a specified size tcp Classify TCP packets 'to' or 'from' the specified port udp Classify UDP packets 'to' or 'from' the specified port R2(config)#fram de-list 1 protocol ip                            ip address         access-list ex OSPF R2(config-ext-nacl)#per     den ospf nay na      any any R2(config-ext-nacl)#per ip any any R2(config-ext-nacl)#exit R2(config)#ip    fram de l   R2(config)#fram de-list 1 p R2(config)#fram de-list 1 protocol ip R2(config)#fram de-list 1 protocol ipl  L l R2(config)#fram de-list 1 protocol ip li R2(config)#fram de-list 1 protocol ip list ? <1-199> IP access list <1300-2699> IP access list R2(config)#fram de-list 1 protocol ip list                                 no access      ip access-list Prob3     OSPF ^ % Invalid input detected at '^' marker. R2(config)#no ip access-list OSPFeOSPFxOSPF OSPF R2(config)#access-list 100 den ospf any any R2(config)#access-list 100 den ospf any any     any any any  any any  any any  any any any any  any any  any any  any any p any anye any anyr any any any anyi any anyp any any any any R2(config)#fram de R2(config)#fram de-list 1 ip li R2(config)#fram de-list 1 ip lis R2(config)#fram de-list 1 ip lis      pre`  o R2(config)#fram de-list 1 protocol ip list 100 R2(config)#int s 1/0.2 R2(config-subif)#fram dw e R2(config-subif)#fram de-group ? <1-10> DE group number R2(config-subif)#fram de-group 1 ? <16-1007> DLCI value R2(config-subif)#fram de-group 1 207 ? R2(config-subif)#fram de-group 1 207 R2(config-subif)#^Z R2# *Mar 2 01:04:38.073: %SYS-5-CONFIG_I: Configured from console by console R2# RACK15AS>7 [Resuming connection 7 to r7 ... ] R7#sh fram pvc 702 PVC Statistics for interface Serial1/0 (Frame Relay DTE) DLCI = 702, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.2 input pkts 5031 output pkts 5027 in bytes 843644 out bytes 842456 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 4511 out bcast bytes 787736 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 1d01h, last time pvc status changed 1d01h R7# RACK15AS>2 [Resuming connection 2 to r2 ... ] R2#p 180.40.7.161 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.161, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/57/60 ms R2# RACK15AS>7 [Resuming connection 7 to r7 ... ] R7#sh fram pvc 702 PVC Statistics for interface Serial1/0 (Frame Relay DTE) DLCI = 702, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.2 input pkts 5041 output pkts 5037 in bytes 844996 out bytes 843808 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 5 out DE pkts 0 out bcast pkts 4513 out bcast bytes 788176 5 minute input rate 1000 bits/sec, 1 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec pvc create time 1d01h, last time pvc status changed 1d01h R7# RACK15AS>2 [Resuming connection 2 to r2 ... ] R2#sh run | de-li ^ % Invalid input detected at '^' marker. R2#sh run | de-libde-li de-li frame-relay de-list 1 protocol ip list 100 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface FastEthernet0/0 no ip address --More--   shutdown duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 20.10.1.1 255.255.255.0 duplex auto speed auto ! interface Serial1/0 no ip address encapsulation frame-relay no fair-queue frame-relay traffic-shaping ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 203 --More--  ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay de-group 1 207 frame-relay interface-dlci 207 class Prob3 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 clock rate 64000 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown --More--  ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ! no ip http server no ip http secure-server ! ! --More--  map-class frame-relay Prob3 frame-relay cir 64000 frame-relay bc 64000 frame-relay be 32000 frame-relay adaptive-shaping becn access-list 100 deny ospf any any access-list 100 permit ip any any ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login --More--  ! --More--  ! --More--  end --More--   R2# RACK15AS>3 [Resuming connection 3 to r3 ... ] * R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#ip tcp ? adjust-mss Adjust the mss of transit packets compression-connections Maximum number of compressed connections header-compression Enable TCP header compression R3(config-if)#ip tcp he R3(config-if)#ip tcp header-compression ? passive Compress only for destinations which send compressed headers R3(config-if)#ip tcp header-compression Header compression not supported for this encapsulation R3(config-if)#int s 1/0 R3(config-if)#ip tcp ? adjust-mss Adjust the mss of transit packets compression-connections Maximum number of compressed connections header-compression Enable TCP header compression R3(config-if)#ip tcp he R3(config-if)#ip tcp header-compression                           fram amp ? % Unrecognized command R3(config-if)#fram amp     map ? appletalk AppleTalk bridge Bridging bstun Block Serial Tunnel clns ISO CLNS decnet DECnet dlsw Data Link Switching (Direct encapsulation only) ip IP ipv6 IPV6 ipx Novell IPX llc2 llc2 pppoe PPP over Ethernet qllc qllc protocol rsrb Remote Source-Route Bridging stun Serial Tunnel R3(config-if)#fram map ip ? A.B.C.D Protocol specific address R3(config-if)#fram map ip 180.40.7.65 ? <16-1007> DLCI vc-bundle vc-bundle R3(config-if)#fram map ip 180.40.7.65 307 ? broadcast Broadcasts should be forwarded to this address cisco Use CISCO Encapsulation compress Enable TCP/IP and RTP/IP header compression ietf Use RFC1490/RFC2427 Encapsulation nocompress Do not compress TCP/IP headers payload-compression Use payload compression rtp RTP header compression parameters tcp TCP header compression parameters R3(config-if)#fram map ip 180.40.7.65 307 tcp ? header-compression Enable TCP/IP header compression R3(config-if)#fram map ip 180.40.7.65 307 tcp h R3(config-if)#fram map ip 180.40.7.65 307 tcp header-compression ? active Always compress TCP/IP headers connections Maximum number of compressed TCP connections passive Compress for destinations sending compressed headers R3(config-if)#fram map ip 180.40.7.65 307 tcp header-compression co R3(config-if)#fram map ip 180.40.7.65 307 tcp header-compression connections ? <3-256> Number of TCP connections R3(config-if)#fram map ip 180.40.7.65 307 tcp header-compression connections $ 180.40.7.65 307 tcp header-compression connections 2 0 ? active Always compress TCP/IP headers passive Compress for destinations sending compressed headers R3(config-if)#$ 180.40.7.65 307 tcp header-compression connections 20 R3(config-if)#^Z R3# *Mar 2 03:03:17.015: %SYS-5-CONFIG_I: Configured from console by console R3#180.40.7.65 Trying 180.40.7.65 ... Open R7# R7# R7# R7# R7#q [Connection to 180.40.7.65 closed by foreign host] R3# R3# RACK15AS>7 [Resuming connection 7 to r7 ... ] R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#do sh run int s 1/0.1 Building configuration... Current configuration : 156 bytes ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 703 end R7(config)#int s 1/0.1 R7(config-subif)#ip tcp ? adjust-mss Adjust the mss of transit packets R7(config-subif)#ip tcp        fram ? class Define a map class on the interface de-group Associate a DE group with a DLCI interface-dlci Define a DLCI on an interface/subinterface inverse-arp Enable/disable FR inverse ARP ip Frame Relay Internet Protocol config commands map Map a protocol address to a DLCI address payload-compression Use payload compression priority-dlci-group Define a priority group of DLCIs vc-bundle configure a frame-relay vc-bundle R7(config-subif)#fram ip ? rtp RTP header compression parameters tcp TCP header compression parameters R7(config-subif)#fram ip tcp ? compression-connections Maximum number of compressed TCP connections header-compression Enable TCP/IP header compression R7(config-subif)#fram ip tcp he R7(config-subif)#fram ip tcp header-compression ? passive Compress for destinations sending compressed headers R7(config-subif)#fram ip tcp header-compression pas R7(config-subif)#fram ip tcp header-compression passive ? R7(config-subif)#fram ip tcp header-compression passive R7(config-subif)# *Mar 2 03:04:58.414: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on Serial1/0.1 from FULL to DOWN, Neighbor Down: Dead timer expired R7(config-subif)#do wr Building configuration... RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#180.40.7.65 Trying 180.40.7.65 ... Open R7# R7# R7# R7# R7# R7# R7#q [Connection to 180.40.7.65 closed by foreign host] R3#sh ip tcp he R3#sh ip tcp header-compression ? Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Group-Async Async Group interface Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Null Null interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-TokenRing Virtual TokenRing | Output modifiers R3#sh ip tcp header-compression s 1/0 TCP/IP header compression statistics: DLCI 307 Link/Destination info: ip 180.40.7.65 Interface Serial1/0: Rcvd: 0 total, 0 compressed, 0 errors, 0 status msgs 0 dropped, 0 buffer copies, 0 buffer failures Sent: 0 total, 0 compressed, 0 status msgs 0 bytes saved, 0 bytes sent Connect: 20 rx slots, 20 tx slots, 0 long searches, 0 misses 0 collisions, 0 negative cache hits R3#deb ip tcp he R3#deb ip tcp header-compression TCP header compression debugging is on R3#deb ip tcp header-compression sh ip tcp header-compression s 1/0180.40.7.65  Trying 180.40.7.65 ... Open R7# R7# R7# R7# R7#q [Connection to 180.40.7.65 closed by foreign host] R3# R3#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/32 is subnetted, 1 subnets O 100.1.1.1 [110/2] via 180.40.7.130, 00:00:35, FastEthernet0/0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/792] via 180.40.7.2, 00:00:35, Serial1/2 [110/792] via 180.40.7.67, 00:00:35, Serial1/0 O 20.10.1.0 [110/782] via 180.40.7.2, 00:00:35, Serial1/2 [110/782] via 180.40.7.67, 00:00:35, Serial1/0 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:00:35, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 7 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/781] via 180.40.7.2, 00:00:36, Serial1/2 [110/781] via 180.40.7.67, 00:00:36, Serial1/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:00:36, FastEthernet0/0 --More--  C 180.40.7.0/27 is directly connected, Serial1/2 O 180.40.7.67/32 [110/781] via 180.40.7.2, 00:00:37, Serial1/2 [110/781] via 180.40.7.67, 00:00:37, Serial1/0 O 180.40.7.65/32 [110/1] via 180.40.7.131, 00:00:37, FastEthernet0/0 C 180.40.7.64/27 is directly connected, Serial1/0 R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int s 1/0 R3(config-if)#ip ospf ne bro R3(config-if)#ip ospf ne broadcast R3(config-if)# *Mar 2 03:07:06.640: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on Serial1/0 from INIT to DOWN, Neighbor Down: Interface down or detached *Mar 2 03:07:06.640: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0 from FULL to DOWN, Neighbor Down: Interface down or detached R3(config-if)#do sh run int s 1/0 Building configuration... Current configuration : 241 bytes ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network broadcast frame-relay map ip 180.40.7.65 307 tcp header-compression connections 20 frame-relay map ip 180.40.7.67 302 broadcast end R3(config-if)# frame-relay map ip 180.40.7.65 307 tcp header-compression conn$y map ip 180.40.7.65 307 tcp header-compression conne ctions 2 27 btcp header-compression connections 2rtcp header-compression connections 2otcp header-compression connections 2 tcp header-compression connections$ frame-relay map ip 180.40.7.65 307 bro tcp header-compression connections 2 ^ % Invalid input detected at '^' marker. R3(config-if)#$80.40.7.65 307 bro tcp header-compression connections 20 R3(config-if)#$80.40.7.65 307 bro tcp header-compression connections 20 do sh run int s 1/0  Building configuration... Current configuration : 251 bytes ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network broadcast frame-relay map ip 180.40.7.65 307 broadcast tcp header-compression connections 20 frame-relay map ip 180.40.7.67 302 broadcast end R3(config-if)# RACK15AS>7 [Resuming connection 7 to r7 ... ] [OK] R7(config-subif)#ip ospf net bro R7(config-subif)#ip ospf net broadcast R7(config-subif)# RACK15AS>2 [Resuming connection 2 to r2 ... ] R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0.1 R2(config-subif)#ip ospf net bro R2(config-subif)#ip ospf net broadcast R2(config-subif)#^Z R2#s *Mar 2 03:08:17.023: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on Serial1/0.1 from FULL to DOWN, Neighbor Down: Interface down or detached R2#sh int *Mar 2 03:08:18.193: %SYS-5-CONFIG_I: Configured from console by console R2#sh int s     run int s 1/0.1 Building configuration... Current configuration : 146 bytes ! interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network broadcast frame-relay interface-dlci 203 end R2#^Z R2# RACK15AS>3 [Resuming connection 3 to r3 ... ] *Ma R3(config-if)#do sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set 100.0.0.0/32 is subnetted, 1 subnets O 100.1.1.1 [110/2] via 180.40.7.130, 00:00:12, FastEthernet0/0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/792] via 180.40.7.2, 00:00:12, Serial1/2 O 20.10.1.0 [110/782] via 180.40.7.2, 00:00:12, Serial1/2 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:00:12, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 5 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/781] via 180.40.7.2, 00:00:13, Serial1/2 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:00:13, FastEthernet0/0 C 180.40.7.0/27 is directly connected, Serial1/2 C 180.40.7.64/27 is directly connected, Serial1/0 R3(config-if)# ^Z R3#confi tsh ip route *Mar 2 03:08:46.499: %SYS-5-CONFIG_I: Configured from console by console R3#sh ip route180.40.7.65 Trying 180.40.7.65 ... Open R7# *Mar 2 03:08:49.392: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:49.448: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:49.452: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:49.452: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:49.516: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:49.516: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:49.520: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:49.524: THC: compressing packet fast R7# idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:49.725: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:50.674: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:50.887: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:52.573: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0 from LOADING to FULL, Loading Done R7# R7# *Mar 2 03:08:55.987: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:56.163: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:56.380: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0q [Connection to 180.40.7.65 closed by foreign host] R3#u all *Mar 2 03:08:58.119: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:58.259: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:58.395: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 *Mar 2 03:08:58.395: THC: compressing packet fast idb = Serial1/0 old_idb = Serial1/0 R3#u all All possible debugging has been turned off R3#sh ip tcp he R3#sh ip tcp header-compression TCP/IP header compression statistics: DLCI 307 Link/Destination info: ip 180.40.7.65 Interface Serial1/0: Rcvd: 17 total, 16 compressed, 0 errors, 0 status msgs 0 dropped, 0 buffer copies, 0 buffer failures Sent: 16 total, 15 compressed, 0 status msgs 516 bytes saved, 163 bytes sent 4.16 efficiency improvement factor Connect: 20 rx slots, 20 tx slots, 1 long searches, 1 misses 0 collisions, 0 negative cache hits 93% hit ratio, five minute miss rate 0 misses/sec, 0 max R3# RACK15AS> [Resuming connection 3 to r3 ... ] R3#sh run int s 1/0 Building configuration... Current configuration : 251 bytes ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network broadcast frame-relay map ip 180.40.7.65 307 broadcast tcp header-compression connections 20 frame-relay map ip 180.40.7.67 302 broadcast end R3# RACK15AS>7 [Resuming connection 7 to r7 ... ] *Ma R7(config-subif)#do sh rin int s 1/0.1 sh rin int s 1/0.1 ^ % Invalid input detected at '^' marker. R7(config-subif)#do sh rin int s 1/0.1n int s 1/0.1 un int s 1/0.1 Building configuration... Current configuration : 193 bytes ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network broadcast frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive end R7(config-subif)#ip \    fram ip tcp ? compression-connections Maximum number of compressed TCP connections header-compression Enable TCP/IP header compression R7(config-subif)#fram ip tcp com R7(config-subif)#fram ip tcp compression-connections ? <3-256> Number of TCP connections R7(config-subif)#fram ip tcp compression-connections 20 03:10:15 UTC Tue Mar 2 1993: Unexpected exception to CPUvector 1100, PC = D0D0D0C -Traceback= D0D0D0C 808D9CB0 808DBEC0 808DF3C8 80759F7C 80749390 8054021C 80551C94 81D8A1C8 81D8D868 Writing crashinfo to flash:crashinfo_19930302-031015 === Flushing messages (03:10:15 UTC Tue Mar 2 1993) === Queued messages: *** System received a SegV exception *** signal= 0xb, code= 0x1100, context= 0x835adc58 PC = 0xd0d0d0c, Vector = 0x1100, SP = 0x831c1a28 System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1) Copyright (c) 2003 by cisco Systems, Inc. C2600 platform with 262144 Kbytes of main memory program load complete, entry point: 0x80008000, size: 0x1470778 Self decompressing the image : ############################################################################################################################################################################################################################################################### RACK15AS>3 [Resuming connection 3 to r3 ... ] *Mar R3# *Mar 2 03:15:41.259: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#class R3(config)#class-map ftp R3(config-cmap)#match pro R3(config-cmap)#match protocol ftp R3(config-cmap)#exit R3(config)#class R3(config)#class-map telnet R3(config-cmap)#match pro R3(config-cmap)#match protocol telnet R3(config-cmap)#exit R3(config)#do sh ip nbar port tcp ftp sh ip nbar port tcp ftp ^ % Invalid input detected at '^' marker. R3(config)#do sh ip nbar port tcp ftp ftp  ftp  ftp ftp  port-map ftp tcp 21 R3(config)# R3(config)# R3(config)# R3(config)#ip nbar port tcop    p ftp 20 21 ^ % Invalid input detected at '^' marker. R3(config)#ip nbar port tcp ftp 20 21 ftp 20 21               ? bgp Border Gateway Protocol citrix Citrix Traffic cuseeme CU-SeeMe desktop video conference custom-01 Custom protocol custom-01 custom-02 Custom protocol custom-02 custom-03 Custom protocol custom-03 custom-04 Custom protocol custom-04 custom-05 Custom protocol custom-05 custom-06 Custom protocol custom-06 custom-07 Custom protocol custom-07 custom-08 Custom protocol custom-08 custom-09 Custom protocol custom-09 custom-10 Custom protocol custom-10 dhcp Dynamic Host Configuration dns Domain Name Server lookup egp Exterior Gateway Protocol eigrp Enhanced Interior Gateway Routing Protocol exchange MS-RPC for Exchange fasttrack FastTrack Traffic - KaZaA, Morpheus, Grokster... finger Finger ftp File Transfer Protocol gnutella Gnutella Traffic - BearShare,LimeWire,Gnotella... --More--   R3(config)#ip nbar port ftp ? tcp TCP ports R3(config)#ip nbar port ftp tcp 20 21 R3(config)#pol R3(config)#policy-map From R  R3 R3(config-pmap)#ftp     class R3(config-pmap)#class ftp R3(config-pmap-c)#ban R3(config-pmap-c)#bandwidth p R3(config-pmap-c)#bandwidth percent 51 R3(config-pmap-c)#class telnet R3(config-pmap-c)#ba R3(config-pmap-c)#bandwidth 24  p 24 R3(config-pmap-c)#e class class-deafult     fault R3(config-pmap-c)#ba R3(config-pmap-c)#bandwidth 25  p R3(config-pmap-c)#bandwidth percent 25 R3(config-pmap-c)#int s 1/2 R3(config-if)#serv R3(config-if)#service-policy out FromR3 I/f Serial1/2 class class-default requested bandwidth 25%, available only 0% R3(config-if)#max R3(config-if)#max-reserved-bandwidth 100 R3(config-if)#max-reserved-bandwidth 100service-policy out FromR3  R3(config-if)#^Z R3#sh r *Mar 2 03:22:30.731: %SYS-5-CONFIG_I: Configured from console by console R3#sh run int         pol int s  1/2 Serial1/2 Service-policy output: FromR3 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp Queueing Output Queue: Conversation 41 Bandwidth 51 (%) Bandwidth 65 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Queueing Output Queue: Conversation 42 Bandwidth 24 (%) Bandwidth 30 (kbps) Max Threshold 64 (packets) --More--   (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: class-default (match-any) 24 packets, 1630 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Output Queue: Conversation 43 Bandwidth 25 (%) Bandwidth 32 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 1/88 (depth/total drops/no-buffer drops) 0/0/0 R3#sh run | b class class-map match-all telnet match protocol telnet class-map match-all ftp match protocol ftp ! ! policy-map FromR3 class ftp bandwidth percent 51 class telnet bandwidth percent 24 class class-default bandwidth percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto --More--   speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 encapsulation frame-relay ip ospf network broadcast frame-relay map ip 180.40.7.65 307 broadcast tcp header-compression connections 20 frame-relay map ip 180.40.7.67 302 broadcast ! interface Serial1/1 no ip address shutdown --More--  ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 max-reserved-bandwidth 100 service-policy output FromR3 ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 --More--   no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ! no ip http server no ip http secure-server ! ip access-list extended Prob1a permit icmp host 100.1.1.1 host 20.10.1.2 echo ip access-list extended Prob1b permit icmp host 100.1.1.1 host 20.10.1.1 echo ip access-list extended Prob1c permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo ! ! route-map Prob1 permit 10 match ip address Prob1c match length 1001 2147483647 --More--   set interface Serial1/2 ! route-map Prob1 permit 20 match ip address Prob1b set ip next-hop 180.40.7.2 ! route-map Prob1 permit 30 match ip address Prob1a set ip next-hop 180.40.7.67 ! route-map Prob1 permit 40 ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous --More--  line aux 0 line vty 0 4 privilege level 15 no login ! ! end R3#sh run | b class     nbar ip nbar port-map ftp tcp 20 21 ! ip cef no ip domain lookup ip audit po max-events 100 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! class-map match-all telnet match protocol telnet --More--  class-map match-all ftp --More--   match protocol ftp --More--  ! --More--   R3# RACK15AS>7 [Resuming connection 7 to r7 ... ] ## R7> R7> R7> R7>en R7#sh run int s 1/0.1 Building configuration... Current configuration : 203 bytes ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive end R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#acc   ip access-list st S5 R7(config-std-nacl)#per 10  208.28.1.2 R7(config-std-nacl)#exit R7(config)#class R7(config)#class-map S5Telnet R7(config-cmap)#match acce R7(config-cmap)#match access-group ? <1-2699> Access list index name Named Access List R7(config-cmap)#match access-group name S5 R7(config-cmap)#match pro R7(config-cmap)#match protocol telnet R7(config-cmap)#exit R7(config)#class R7(config)#class-map S5Other R7(config-cmap)#class-map S5Otherexit match protocol telnetaccess-group name S5 R7(config-cmap)#exit R7(config)#clas R7(config)#class-map j jpg R7(config-cmap)#match pro R7(config-cmap)#match protocol ? aarp AppleTalk ARP appletalk AppleTalk arp IP ARP bgp Border Gateway Protocol bridge Bridging bstun Block Serial Tunnel cdp Cisco Discovery Protocol citrix Citrix Traffic clns ISO CLNS clns_es ISO CLNS End System clns_is ISO CLNS Intermediate System cmns ISO CMNS compressedtcp Compressed TCP cuseeme CU-SeeMe desktop video conference custom-01 Custom protocol custom-01 custom-02 Custom protocol custom-02 custom-03 Custom protocol custom-03 custom-04 Custom protocol custom-04 custom-05 Custom protocol custom-05 custom-06 Custom protocol custom-06 custom-07 Custom protocol custom-07 custom-08 Custom protocol custom-08 --More--   custom-09 Custom protocol custom-09 custom-10 Custom protocol custom-10 decnet DECnet decnet_node DECnet Node decnet_router-l1 DECnet Router L1 decnet_router-l2 DECnet Router L2 dhcp Dynamic Host Configuration dlsw Data Link Switching (Direct encapsulation only) dns Domain Name Server lookup egp Exterior Gateway Protocol eigrp Enhanced Interior Gateway Routing Protocol exchange MS-RPC for Exchange fasttrack FastTrack Traffic - KaZaA, Morpheus, Grokster... finger Finger ftp File Transfer Protocol gnutella Gnutella Traffic - BearShare,LimeWire,Gnotella... gopher Gopher gre Generic Routing Encapsulation http World Wide Web traffic icmp Internet Control Message imap Internet Message Access Protocol ip IP ipinip IP in IP (encapsulation) --More--   ipsec IP Security Protocol (ESP/AH) ipv6 IPV6 ipx Novell IPX irc Internet Relay Chat kazaa2 Kazaa Version 2 kerberos Kerberos l2tp L2F/L2TP tunnel ldap Lightweight Directory Access Protocol llc2 llc2 napster Napster Traffic netbios NetBIOS netshow Microsoft Netshow nfs Network File System nntp Network News Transfer Protocol notes Lotus Notes(R) novadigm Novadigm EDM ntp Network Time Protocol pad PAD links pcanywhere Symantec pcANYWHERE pop3 Post Office Protocol pppoe PPP over Ethernet pptp Point-to-Point Tunneling Protocol printer print spooler/lpd --More--   R7(config-cmap)#match protocol ttp     http ? host Server Host Name mime Match MIME Type url Match URL String R7(config-cmap)#match protocol http mime R7(config-cmap)#match protocol http mime ? WORD Enter a string as the sub-protocol parameter R7(config-cmap)#match protocol http mime *.jpg R7(config-cmap)#match protocol http mime *.jpg eg R7(config-cmap)#match protocol http mime *.jpeg  R7(config-cmap)#match protocol http mime *.jpe          url R7(config-cmap)#match protocol http url *.jpg R7(config-cmap)#match protocol http url *.jpg e R7(config-cmap)#match protocol http url *.jpeg R7(config-cmap)#do sh run | b class class-map match-all S5Other match access-group name S5 class-map match-all S5Telnet match access-group name S5 match protocol telnet class-map match-all jpg match protocol http mime "*.jpg" match protocol http mime "*.jpeg" match protocol http mime "*.jpe" match protocol http url "*.jpg" match protocol http url "*.jpe" match protocol http url "*.jpeg" ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex ! --More--   R7(config-cmap)#exit R7(config)#exitdo sh run | b classmatch protocol http url *.jpeg gmime *.jpegg class-map jpg exit class-map jpgmjpgajpgtjpgcjpghjpg-jpgajpgnjpgyjpg jpg R7(config-cmap)#class-map match-any jpgexit do sh run | b class class-map match-all S5Other match access-group name S5 class-map match-all S5Telnet match access-group name S5 match protocol telnet class-map match-any jpg match protocol http mime "*.jpg" match protocol http mime "*.jpeg" match protocol http mime "*.jpe" match protocol http url "*.jpg" match protocol http url "*.jpe" match protocol http url "*.jpeg" ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex ! --More--   R7(config-cmap)#exit R7(config)#pol R7(config)#policy-map Prob5 R7(config-pmap)#clas R7(config-pmap)#class S5Telnet R7(config-pmap-c)#ban R7(config-pmap-c)#bandwidth ? <8-2000000> Kilo Bits per second percent % of total Bandwidth remaining % of the remaining bandwidth R7(config-pmap-c)#bandwidth 1000 R7(config-pmap-c)#exit R7(config-pmap)#clss    ass       class R7(config-pmap)#class S5Other             exit R7(config)#pol R7(config)#policy-map jgp R7(config-pmap)#class jpg R7(config-pmap-c)#shap R7(config-pmap-c)#shape ? adaptive Enable Traffic Shaping adaptation to BECN average configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc only per interval fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fr-voice-adapt Enable rate adjustment depending on voice presence max-buffers Set Maximum Buffer Limit peak configure token bucket: CIR (bps) [Bc (bits) [Be (bits)]], send out Bc+Be per interval R7(config-pmap-c)#shape ave R7(config-pmap-c)#shape average ? <8000-154400000> Target Bit Rate (bits per second), the value needs to be multiple of 8000 percent % of interface bandwidth for Committed information rate R7(config-pmap-c)#shape average 1000000 R7(config-pmap-c)#pol Prob5 R7(config-pmap)#class Sr 5Other R7(config-pmap-c)#pol R7(config-pmap-c)#police 5000000 con R7(config-pmap-c)#police 5000000 conform-action se R7(config-pmap-c)#police 5000000 conform-action set-p R7(config-pmap-c)#police 5000000 conform-action set-prec-transmit 3 R7(config-pmap-c-police)#ex R7(config-pmap-c-police)#ex  R7(config-pmap-c-police)#exc R7(config-pmap-c-police)#exceed-action se R7(config-pmap-c-police)#exceed-action set-1 p R7(config-pmap-c-police)#exceed-action set-prec-transmit 1 R7(config-pmap-c-police)#exit R7(config-pmap-c)#serv R7(config-pmap-c)#service-policy ? WORD policy-map name R7(config-pmap-c)#service-policy jpg % policy map jpg not configured R7(config-pmap-c)#exit R7(config-pmap)#exit R7(config)#exitservice-policy jpgexit ceed-action set-prec-transmit 1police 5000000 conform-action set-prec-transmit 3class S5Other pol Prob5 shape average 1000000class jpg policy-map jgpnpolicy-map jgpopolicy-map jgp policy-map jgp R7(config)#no policy-map jgpexit no policy-map jgp  pgpolicy-map jpg policy-map jpg policy-map jpg  R7(config-pmap)#class jpg R7(config-pmap-c)#sha 1000000 ^ % Invalid input detected at '^' marker. R7(config-pmap-c)#sha 1000000a1000000 10000001000000 v1000000 ^ % Invalid input detected at '^' marker. R7(config-pmap-c)#sha av1000000 1000000 R7(config-pmap-c)#pol Prob5 R7(config-pmap)#class R7(config-pmap)#class S5Other R7(config-pmap-c)#sev r R7(config-pmap-c)#service-policy jpg R7(config-pmap-c)#do sh run | b class class-map match-all S5Other match access-group name S5 class-map match-all S5Telnet match access-group name S5 match protocol telnet class-map match-any jpg match protocol http mime "*.jpg" match protocol http mime "*.jpeg" match protocol http mime "*.jpe" match protocol http url "*.jpg" match protocol http url "*.jpe" match protocol http url "*.jpeg" ! ! policy-map jpg class jpg shape average 1000000 policy-map Prob5 class S5Telnet bandwidth 1000 class S5Other police cir 5000000 conform-action set-prec-transmit 3 --More--   exceed-action set-prec-transmit 1 --More--   service-policy jpg --More--  ! --More--  ! --More--  ! --More--  ! --More--  ! --More--  ! --More--   R7(config-pmap-c)#int fa 0/1 R7(config-if)#serv out Prob5 GTS : Can be enabled only at the first level R7(config-if)#exit R7(config)#no pol jpg R7(config)#ser   pio  ol Prob5 R7(config-pmap)#class       no class S6 5Other R7(config-pmap)#class jpg R7(config-pmap-c)#shapre    e av 1000000 R7(config-pmap-c)#exit R7(config-pmap)#class S5Other R7(config-pmap-c)#pclass S5Otherexit shape av 1000000class jpg no class S5Otherpol Prob5 no pol jpgpol Prob5 no class S5Otherclass jpg shape av 1000000exit      police cir 5000000 R7(config-pmap-c-police)# conform-action set-prec-transmit 3 R7(config-pmap-c-police)# exceed-action set-prec-transmit 1 R7(config-pmap-c-police)#int fa 0/1 R7(config-if)#ser out Porb4 5 % policy map Porb5 not configured R7(config-if)#ser out Porb5b5 b5 rb5ob5 R7(config-if)#^Z R7#sh pol in *Mar 1 00:34:44.700: %SYS-5-CONFIG_I: Configured from console by console R7#sh pol int fa 0/1 FastEthernet0/1 Service-policy output: Prob5 Class-map: S5Telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name S5 Match: protocol telnet Queueing Output Queue: Conversation 265 Bandwidth 1000 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: jpg (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol http mime "*.jpg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http mime "*.jpeg" 0 packets, 0 bytes --More--   5 minute rate 0 bps Match: protocol http mime "*.jpe" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpg" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpe" 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol http url "*.jpeg" 0 packets, 0 bytes 5 minute rate 0 bps Traffic Shaping Target/Average Byte Sustain Excess Interval Increment Rate Limit bits/int bits/int (ms) (bytes) 1000000/1000000 6250 25000 25000 25 3125 Adapt Queue Packets Bytes Packets Bytes Shaping Active Depth Delayed Delayed Active - 0 0 0 0 0 no Class-map: S5Other (match-all) --More--   0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name S5 police: cir 5000000 bps, bc 156250 bytes conformed 0 packets, 0 bytes; actions: set-prec-transmit 3 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 1 conformed 0 bps, exceed 0 bps Class-map: class-default (match-any) 7 packets, 923 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R7#^x3 % Unknown command or computer name, or unable to find computer address R7# R7# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#class-map match-all dscp12 R3(config-cmap)# match dscp af12 R3(config-cmap)#class-map match-all dscp14 R3(config-cmap)# match dscp af13 R3(config-cmap)#class-map match-all dscp26 R3(config-cmap)# match dscp af31 R3(config-cmap)#class-map match-all dscp28 R3(config-cmap)# match dscp af32 R3(config-cmap)#class-map match-all prec3 R3(config-cmap)# match ip precedence 3 R3(config-cmap)#policy-map test R3(config-pmap)# class dscp12 R3(config-pmap-c)# class dscp14 R3(config-pmap-c)# class dscp26 R3(config-pmap-c)# class dscp28 R3(config-pmap-c)# class prec3 R3(config-pmap-c)#interface FastEthernet0/0 R3(config-if)# service-policy input test R3(config-if)#^Z R3#sh p *Mar 2 03:51:48.340: %SYS-5-CONFIG_I: Configured from console by console R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: class-default (match-any) 4 packets, 392 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#x  RACK15AS>5 [Resuming connection 5 to r5 ... ] 1d0 S5#p 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5#p 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5#p 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5#p 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 20 packets, 2280 bytes 5 minute offered rate 1000 bps Match: ip precedence 3 Class-map: class-default (match-any) 11 packets, 1078 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# RACK15AS>7 [Resuming connection 7 to r7 ... ] R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#pol Prob5 R7(config-pmap)#class S5Other R7(config-pmap-c)#pol ? <8000-2000000000> Bits per second cir Committed information rate R7(config-pmap-c)#pol 8000 set p  -p 3         con R7(config-pmap-c)#pol 8000 conform-action se R7(config-pmap-c)#pol 8000 conform-action set-p R7(config-pmap-c)#pol 8000 conform-action set-prec-transmit 3 exc ec  c R7(config-pmap-c)#pol 8000 conform-action set-prec-transmit 3 exceed-action s R7(config-pmap-c)#$nform-action set-prec-transmit 3 exceed-action set-p R7(config-pmap-c)#$on set-prec-transmit 3 exceed-action set-prec-transmit 1 R7(config-pmap-c)#$on set-prec-transmit 3 exceed-action set-prec-transmit 1 R7(config-pmap-c-police)# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#confi Configuring from terminal, memory, or network [terminal]? Enter configuration commands, one per line. End with CNTL/Z. R3(config)#class prec1 ^ % Invalid input detected at '^' marker. R3(config)#class prec1- prec1m prec1 R3(config)#class-m prec1 R3(config-cmap)#match ip pre R3(config-cmap)#match ip precedence 1 R3(config-cmap)#pol test R3(config-pmap)#class prec1 R3(config-pmap-c)#exit R3(config-pmap)#service > ? % Unrecognized command R3(config-pmap)#service       ive ? % Unrecognized command R3(config-pmap)#seive     rvice ? % Unrecognized command R3(config-pmap)#service         p ? % Unrecognized command R3(config-pmap)#p   exit R3(config)#serv R3(config)#service ? alignment Control alignment correction and logging compress-config Compress the nvram configuration file config TFTP load config files dhcp Enable DHCP server and relay agent disable-ip-fast-frag Disable IP particle-based fast fragmentation exec-callback Enable exec callback exec-wait Delay EXEC startup on noisy lines finger Allow responses to finger requests hide-telnet-addresses Hide destination addresses in telnet command linenumber enable line number banner for each exec nagle Enable Nagle's congestion control algorithm old-slip-prompts Allow old scripts to operate with slip/ppp pad Enable PAD commands password-encryption Encrypt system passwords prompt Enable mode specific prompt pt-vty-logging Log significant VTY-Async events sequence-numbers Stamp logger messages with a sequence number slave-log Enable log capability of slave IPs tcp-keepalives-in Generate keepalives on idle incoming network connections tcp-keepalives-out Generate keepalives on idle outgoing network connections --More--   tcp-small-servers Enable small TCP servers (e.g., ECHO) telnet-zeroidle Set TCP window 0 when connection is idle timestamps Timestamp debug/log messages udp-small-servers Enable small UDP servers (e.g., ECHO) R3(config)#service tcp-small-servers ? max-servers Set number of allowable TCP small servers R3(config)#service tcp-small-servers R3(config)# RACK15AS>5 [Resuming connection 5 to r5 ... ] S5#p 180.40.7.129p 180.40.7.129  180.40.7.129 19 Trying 180.40.7.129, 19 ... Open !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefg !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefgh "#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghi #$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghij $%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijk %&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijkl &'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklm '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmn ()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmno )*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnop *+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq +,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr ,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrs -./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrst ./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstu /0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuv 0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvw 123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwx 23456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxy 3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz 456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{ 56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{| 6789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|} 789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 89:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghi RACK15AS>3 [Resuming connection 3 to r3 ... ] R3(config)#^Z R3#sh *Mar 2 03:56:16.996: %SYS-5-CONFIG_I: Configured from console by console R3#sh pol int fa 0/1 R3#sh pol int fa 0/1 0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 56 packets, 4440 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 62 packets, 6036 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 73 packets, 5460 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 64 packets, 6232 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 88 packets, 6360 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 66 packets, 6428 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# RACK15AS>5 [Resuming connection 5 to r5 ... ] nopqrstuvwxyz{|}~ 9:;?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxy 3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz 456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{ 56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{| 6789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|} 789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 89:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 9:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ ! :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijk lmnopqrstuvwxyz{|}~ !" ;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"# <=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$ =>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$% >?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%& ?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&' @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'( ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'() BCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()* CDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+ DEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+, EFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,- FGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-. GHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./ HIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0 IJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01 JKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012 KLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123 LMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234 MNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345 NOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456 OPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234567 PQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345678 QRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789 RSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789: STUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:; TUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;< UVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<= VWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=> WXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>? XYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ YZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@A Z[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@AB [\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABC \]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCD ]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDE ^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEF _`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFG `abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGH abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHI bcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJ cdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJK defghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKL efghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLM fghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMN ghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNO hijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOP ijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQ jklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQR klmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRS lmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRST mnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTU nopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUV opqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW pqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWX qrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXY rstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ stuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[ tuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\ uvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\] vwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^ wxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ xyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` yz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`a z{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`ab {|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc |}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcd }~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcde ~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdef !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefg !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefgh "#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghi #$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghij $%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijk %&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijkl &'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklm '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmn ()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmno )*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnop *+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq +,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr ,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrs -./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrst ./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstu /0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuv 0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvw 123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwx 23456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxy 3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz 456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{ 56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{| 6789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|} 789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 89:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 9:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ ! :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !" ;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"# <=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$ =>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$% >?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%& ?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&' @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'( ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'() BCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()* CDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+ DEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+, EFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,- FGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-. GHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./ HIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0 IJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01 JKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012 KLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123 LMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234 MNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345 NOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456 OPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234567 PQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345678 QRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789 RSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789: STUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:; TUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;< UVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<= VWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=> WXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>? XYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ YZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@A Z[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@AB [\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABC \]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCD ]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDE ^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEF _`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFG `abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGH abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHI bcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJ cdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJK defghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKL efghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLM fghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMN ghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNO hijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOP ijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQ jklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQR klmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRS lmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRST mnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTU nopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUV opqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW pqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWX qrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXY rstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ stuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[ tuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\ uvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\] vwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^ wxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ xyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` yz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`a z{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`ab {|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc |}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcd }~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcde ~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdef !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefg !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefgh "#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghi #$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghij $%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijk %&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijkl &'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklm '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmn ()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmno )*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnop *+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq +,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr ,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrs -./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrst ./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstu /0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuv 0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvw 123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwx 23456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxy 3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz 456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{ 56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{| 6789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|} 789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 89:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 9:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ ! :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !" ;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"# <=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$ =>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$% >?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%& ?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&' @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'( ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'() BCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()* CDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+ DEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+, EFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,- FGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-. GHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./ HIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0 IJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01 JKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012 KLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123 LMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234 MNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345 NOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456 OPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234567 PQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345678 QRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789 RSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789: STUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:; TUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;< UVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<= VWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=> WXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>? XYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ YZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@A Z[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@AB [\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABC \]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCD ]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDE ^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEF _`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFG `abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGH abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHI bcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJ cdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJK defghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKL efghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLM fghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMN ghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNO hijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOP ijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQ jklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQR klmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRS lmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRST mnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTU nopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUV opqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW pqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWX qrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXY rstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ stuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[ tuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\ uvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\] vwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^ wxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ xyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` yz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`a z{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`ab {|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc |}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcd }~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcde ~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdef !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefg !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefgh "#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghi #$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghij $%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijk %&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijkl &'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklm '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmn ()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmno )*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnop *+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq +,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr ,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrs -./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrst ./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstu /0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuv 0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvw 123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwx 23456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxy 3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz 456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{ 56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{| 6789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|} 789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 89:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 9:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ ! :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !" ;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"# <=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$ =>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$% >?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%& ?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&' @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'( ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'() BCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()* CDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+ DEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+, EFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,- FGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-. GHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./ HIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0 IJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01 JKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012 KLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123 LMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234 MNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345 NOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456 OPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234567 PQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345678 QRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789 RSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789: STUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:; TUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;< UVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<= VWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=> WXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>? XYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ YZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@A Z[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@AB [\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABC \]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCD ]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDE ^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEF _`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFG `abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGH abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHI bcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJ cdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJK defghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKL efghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLM fghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMN ghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNO hijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOP ijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQ jklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQR klmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRS lmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRST mnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTU nopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUV opqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW pqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWX qrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXY rstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ stuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[ tuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\ uvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\] vwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^ wxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ xyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` yz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`a z{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`ab {|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc |}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcd }~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcde ~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdef !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefg !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefgh "#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghi #$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghij $%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijk %&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijkl &'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklm '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmn ()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmno )*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnop *+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq +,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr ,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrs -./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrst ./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstu /0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuv 0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvw 123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwx 23456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxy 3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz 456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{ 56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{| 6789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|} 789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 89:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 9:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ ! :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !" ;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"# <=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$ =>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$% >?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%& ?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&' @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'( ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'() BCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()* CDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+ DEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+, EFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,- FGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-. GHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./ HIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0 IJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01 JKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012 KLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123 LMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234 MNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345 NOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456 OPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234567 PQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345678 QRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789 RSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789: STUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:; TUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;< UVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<= VWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=> WXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>? XYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ YZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@A Z[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@AB [\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABC \]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCD ]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDE ^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEF _`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFG `abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGH abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHI bcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJ cdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJK defghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKL efghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLM fghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMN ghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNO hijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOP ijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQ jklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQR klmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRS lmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRST mnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTU nopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUV opqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW pqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWX qrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXY rstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ stuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[ tuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\ uvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\] vwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^ wxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ xyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` yz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`a z{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`ab {|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc |}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcd }~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcde ~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdef !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefg !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefgh "#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghi #$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghij $%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijk %&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijkl &'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklm '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmn ()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmno )*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnop *+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq +,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr ,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrs -./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrst ./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstu /0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuv 0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvw 123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwx 23456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxy 3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz 456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{ 56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{| 6789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|} 789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 89:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 9:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ ! :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !" ;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"# <=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$ =>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$% >?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%& ?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&' @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'( ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'() BCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()* CDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+ DEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+, EFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,- FGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-. GHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./ HIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0 IJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01 JKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012 KLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123 LMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234 MNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345 NOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456 OPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234567 PQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345678 QRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789 RSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789: STUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:; TUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;< UVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<= VWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=> WXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>? XYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ YZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@A Z[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@AB [\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABC \]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCD ]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDE ^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEF _`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFG `abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGH abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHI bcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJ cdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJK defghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKL efghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLM fghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMN ghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNO hijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOP ijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQ jklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQR klmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRS lmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRST mnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTU nopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUV opqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW pqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWX qrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXY rstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ stuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[ tuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\ uvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\] vwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^ wxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ xyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` yz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`a z{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`ab {|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc |}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcd }~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcde ~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdef !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefg !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefgh "#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghi #$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghij $%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijk %&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijkl &'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklm '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmn ()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmno )*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnop *+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq +,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr ,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrs -./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrst ./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstu /0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuv 0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvw 123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwx 23456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxy 3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz 456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{ 56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{| 6789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|} 789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 89:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 9:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ ! :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !" ;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"# <=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$ =>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$% >?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%& ?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&' @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'( ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'() BCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()* CDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+ DEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+, EFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,- FGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-. GHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./ HIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0 IJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01 JKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012 KLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123 LMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234 MNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345 NOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456 OPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234567 PQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345678 QRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789 RSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789: STUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:; TUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;< UVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<= VWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=> WXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>? XYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ YZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@A Z[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@AB [\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABC \]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCD ]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDE ^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEF _`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFG `abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGH abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHI bcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJ cdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJK defghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKL efghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLM fghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMN ghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNO hijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOP ijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQ jklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQR klmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRS lmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRST mnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTU nopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUV opqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW pqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWX qrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXY rstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ stuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[ tuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\ uvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\] vwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^ wxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ xyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` yz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`a z{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW S5#disc Closing connection to 180.40.7.129 [confirm] S5#confi t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#ser S5(config)#service tc S5(config)#service tcp-s S5(config)#service tcp-small-servers S5(config)#^Z S5# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#sh run | b line line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! ! end R3#208.28.1.2 19 Trying 208.28.1.2, 19 ... Open !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefg !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefgh "#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghi #$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghij $%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijk %&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijkl &'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklm '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmn ()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmno )*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnop *+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq +,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr ,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrs -./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrst ./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstu /0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuv 0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvw 123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwx 23456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxy 3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz 456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{ 56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{| 6789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|} 789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 89:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 9:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ ! :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !" ;<=>?@ABCDEFGHIJKLMNOPQR RACK15AS>45  [Resuming connection 4 to r4 ... ] * R4#180.40.7.129 Trying 180.40.7.129 ... Open R3#sh pol in fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 240 packets, 32650 bytes 5 minute offered rate 4000 bps Match: ip precedence 3 Class-map: prec1 (match-all) 9 packets, 5150 bytes 5 minute offered rate 2000 bps Match: ip precedence 1 Class-map: class-default (match-any) 124 packets, 10905 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#sh pol in fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 254 packets, 40910 bytes 5 minute offered rate 6000 bps Match: ip precedence 3 Class-map: prec1 (match-all) 11 packets, 6010 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 133 packets, 11521 bytes 5 minute offered rate 1000 bps, drop rate 0 bps Match: any R3#sh pol in fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 296 packets, 64469 bytes 5 minute offered rate 7000 bps Match: ip precedence 3 Class-map: prec1 (match-all) 15 packets, 8050 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 146 packets, 12529 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# R3#q q [Connection to 180.40.7.129 closed by foreign host] R4# R4# RACK15AS>7 [Resuming connection 7 to r7 ... ] R7(config-pmap-c-police)#$c-transmit 3 exceed-action set-prec-transmit 1on set-prec-transmit 3 exceed-action set-prec-transm$nform-action set-prec-transmit 3 exceed-action set-ppol 8000 conform-action set-prec-transmit 3 exceed-acpol 80000 conform-action set-prec-transmit 3 exceed-act5000 conform-action set-prec-transmit 3 exceed-ac0000 conform-action set-prec-transmit 3 exceed-a0000 conform-action set-prec-transmit 3 exceed-0000 conform-action set-prec-transmit 3 exceed R7(config-pmap-c-police)#^Z R7# *Mar 1 00:47:17.282: %SYS-5-CONFIG_I: Configured from console by console R7# RACK15AS>4 [Resuming connection 4 to r4 ... ] 180.40.7.129 Trying 180.40.7.129 ... Open R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 499 packets, 180786 bytes 5 minute offered rate 7000 bps Match: ip precedence 3 Class-map: prec1 (match-all) 35 packets, 17288 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 217 packets, 17822 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 505 packets, 184165 bytes 5 minute offered rate 7000 bps Match: ip precedence 3 Class-map: prec1 (match-all) 35 packets, 17288 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 223 packets, 18182 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 511 packets, 187545 bytes 5 minute offered rate 7000 bps Match: ip precedence 3 Class-map: prec1 (match-all) 35 packets, 17288 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 228 packets, 18482 bytes 5 minute offered rate 2000 bps, drop rate 0 bps Match: any R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 524 packets, 195055 bytes 5 minute offered rate 7000 bps Match: ip precedence 3 Class-map: prec1 (match-all) 35 packets, 17288 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 236 packets, 19038 bytes 5 minute offered rate 2000 bps, drop rate 0 bps Match: any R3#q [Connection to 180.40.7.129 closed by foreign host] R4# R4# RACK15AS>3 [Resuming connection 3 to r3 ... ] TUVWXYZ[\]^_`abcdefghijklrstuvwxyz{|}~ ! :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !" ;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"# <=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$ =>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$% >?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%& ?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&' @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'( ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'() BCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()* CDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+ DEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+, EFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,- FGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-. GHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./ HIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0 IJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01 JKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012 KLMNOPQRSTUVWXYZ[\]^_ `abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123 LMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234 MNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345 NOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456 OPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234567 PQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345678 QRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789 RSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789: STUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:; TUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;< UVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<= VWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=> WXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>? XYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ YZ[\]^_ R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 648 packets, 266835 bytes 5 minute offered rate 11000 bps Match: ip precedence 3 Class-map: prec1 (match-all) 35 packets, 17288 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 249 packets, 20046 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 676 packets, 283355 bytes 5 minute offered rate 11000 bps Match: ip precedence 3 Class-map: prec1 (match-all) 35 packets, 17288 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 251 packets, 20242 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# sh sess Conn Host Address Byte Idle Conn Name * 1 208.28.1.2 208.28.1.2 2733 0 208.28.1.2 R3#disc Closing connection to 208.28.1.2 [confirm] R3# RACK15AS>7 [Resuming connection 7 to r7 ... ] R7#sh run | b class class-map match-all S5Other match access-group name S5 class-map match-all S5Telnet match access-group name S5 match protocol telnet class-map match-any jpg match protocol http mime "*.jpg" match protocol http mime "*.jpeg" match protocol http mime "*.jpe" match protocol http url "*.jpg" match protocol http url "*.jpe" match protocol http url "*.jpeg" ! ! policy-map Prob5 class S5Telnet bandwidth 1000 class jpg shape average 1000000 class S5Other police cir 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 --More--  ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 speed auto half-duplex service-policy output Prob5 ! interface Serial1/0 no ip address --More--   encapsulation frame-relay ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 702 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 no ip address shutdown ! interface Serial1/3 no ip address --More--   shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless --More--  ! no ip http server no ip http secure-server ! ip access-list standard S5 permit 208.28.1.2 ! ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login --More--   R7# R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#pri R7(config)#prio R7(config)#priority-list ? <1-16> Priority list number R7(config)#priority-list 1 ? default Set priority queue for unspecified datagrams interface Establish priorities for packets from a named interface protocol priority queueing by protocol queue-limit Set queue limits for priority queues R7(config)#priority-list 1 pr R7(config)#priority-list 1 protocol ? aarp AppleTalk ARP appletalk AppleTalk arp IP ARP bridge Bridging bstun Block Serial Tunnel cdp Cisco Discovery Protocol clns ISO CLNS clns_es ISO CLNS End System clns_is ISO CLNS Intermediate System cmns ISO CMNS compressedtcp Compressed TCP decnet DECnet decnet_node DECnet Node decnet_router-l1 DECnet Router L1 decnet_router-l2 DECnet Router L2 dlsw Data Link Switching (Direct encapsulation only) ip IP ipv6 IPV6 ipx Novell IPX llc2 llc2 pad PAD links pppoe PPP over Ethernet --More--   R7(config)#priority-list 1 protocol p ip    oip   ip ? high medium normal low R7(config)#priority-list 1 protocol ip : high ? fragments Prioritize fragmented IP packets gt Prioritize packets greater than a specified size list To specify an access list lt Prioritize packets less than a specified size tcp Prioritize TCP packets 'to' or 'from' the specified port udp Prioritize UDP packets 'to' or 'from' the specified port R7(config)#priority-list 1 protocol ip high ? fragments Prioritize fragmented IP packets gt Prioritize packets greater than a specified size list To specify an access list lt Prioritize packets less than a specified size tcp Prioritize TCP packets 'to' or 'from' the specified port udp Prioritize UDP packets 'to' or 'from' the specified port R7(config)#priority-list 1 protocol ip high tcp ? <0-65535> Port number bgp Border Gateway Protocol (179) chargen Character generator (19) cmd Remote commands (rcmd, 514) daytime Daytime (13) discard Discard (9) domain Domain Name Service (53) echo Echo (7) exec Exec (rsh, 512) finger Finger (79) ftp File Transfer Protocol (21) ftp-data FTP data connections (20) gopher Gopher (70) hostname NIC hostname server (101) ident Ident Protocol (113) irc Internet Relay Chat (194) klogin Kerberos login (543) kshell Kerberos shell (544) login Login (rlogin, 513) lpd Printer service (515) nntp Network News Transport Protocol (119) pim-auto-rp PIM Auto-RP (496) --More--   pop2 Post Office Protocol v2 (109) pop3 Post Office Protocol v3 (110) smtp Simple Mail Transport Protocol (25) sunrpc Sun Remote Procedure Call (111) syslog Syslog (514) tacacs TAC Access Control System (49) talk Talk (517) telnet Telnet (23) time Time (37) uucp Unix-to-Unix Copy Program (540) whois Nicname (43) www World Wide Web (HTTP, 80) R7(config)#priority-list 1 protocol ip high tcp telnet R7(config)#prio R7(config)#priority-list 1 pro R7(config)#priority-list 1 protocol ip low ? fragments Prioritize fragmented IP packets gt Prioritize packets greater than a specified size list To specify an access list lt Prioritize packets less than a specified size tcp Prioritize TCP packets 'to' or 'from' the specified port udp Prioritize UDP packets 'to' or 'from' the specified port R7(config)#priority-list 1 protocol ip low tcp ? <0-65535> Port number bgp Border Gateway Protocol (179) chargen Character generator (19) cmd Remote commands (rcmd, 514) daytime Daytime (13) discard Discard (9) domain Domain Name Service (53) echo Echo (7) exec Exec (rsh, 512) finger Finger (79) ftp File Transfer Protocol (21) ftp-data FTP data connections (20) gopher Gopher (70) hostname NIC hostname server (101) ident Ident Protocol (113) irc Internet Relay Chat (194) klogin Kerberos login (543) kshell Kerberos shell (544) login Login (rlogin, 513) lpd Printer service (515) nntp Network News Transport Protocol (119) pim-auto-rp PIM Auto-RP (496) --More--   pop2 Post Office Protocol v2 (109) pop3 Post Office Protocol v3 (110) smtp Simple Mail Transport Protocol (25) sunrpc Sun Remote Procedure Call (111) syslog Syslog (514) tacacs TAC Access Control System (49) talk Talk (517) telnet Telnet (23) time Time (37) uucp Unix-to-Unix Copy Program (540) whois Nicname (43) www World Wide Web (HTTP, 80) R7(config)#priority-list 1 protocol ip low tcp www R7(config)#priority-list 1 protocol ip low tcp www                           def R7(config)#priority-list 1 default not r R7(config)#priority-list 1 default normal R7(config)#do sh run | b prio priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! ! end R7(config)#do sh run | b priopriority-list 1 default normal        me R7(config)#priority-list 1 default medium R7(config)#priority-list 1 default medium do sh run | b prio priority-list 1 default normal do sh run | b prio  priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www priority-list 1 default medium ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! ! end R7(config)#do sh run | b priopriority-list 1 default medium do sh run | b prio priority-list 1 default normal R7(config)#int s 1/0.2 R7(config-subif)#pri R7(config-subif)#pri R7(config-subif)#pri R7(config-subif)#pri R7(config-subif)#pri R7(config-subif)#pri R7(config-subif)#pri R7(config-subif)#pri R7(config-subif)#pri R7(config-subif)#pri R7(config-subif)#pri R7(config-subif)#pri? % Unrecognized command R7(config-subif)#pri   int s 1/0.2   R7(config-if)#pri R7(config-if)#priority-group ? <1-16> Priority group R7(config-if)#priority-group                int s 1/0.2 R7(config-subif)#fram pr R7(config-subif)#fram priority-dlci-group ? <1-16> Assign priority group R7(config-subif)#fram priority-dlci-group 1 ? <16-1007> DLCI for high priority R7(config-subif)#fram priority-dlci-group 1 702 ? <16-1007> DLCI for medium priority R7(config-subif)#fram priority-dlci-group 1 702 R7(config-subif)# *Mar 1 00:54:25.215: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from FULL to DOWN, Neighbor Down: Interface down or detached R7(config-subif)# R7(config-subif)# R7(config-subif)# R7(config-subif)#do sh run int s 1/0- .2 Building configuration... Current configuration : 208 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 end R7(config-subif)# *Mar 1 00:54:50.917: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from LOADING to FULL, Loading Done R7(config-subif)#do sh fram pvc PVC Statistics for interface Serial1/0 (Frame Relay DTE) Active Inactive Deleted Static Local 2 0 0 0 Switched 0 0 0 0 Unused 0 1 0 0 DLCI = 701, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE = Serial1/0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 0 out bcast bytes 0 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 00:54:21, last time pvc status changed 00:54:21 --More--   R7(config-subif)#do sh fram pvc 702 PVC Statistics for interface Serial1/0 (Frame Relay DTE) DLCI = 702, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.2 input pkts 202 output pkts 206 in bytes 33152 out bytes 34060 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 168 out bcast bytes 29880 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 00:54:35, last time pvc status changed 00:54:35 Priority DLCI Group 1, DLCI 702 (HIGH), DLCI 702 (MEDIUM) DLCI 702 (NORMAL), DLCI 702 (LOW) R7(config-subif)#  ^Z R7#de *Mar 1 00:55:15.674: %SYS-5-CONFIG_I: Configured from console by console R7#deb pri R7#deb pri     qu R7#deb qu? % Unrecognized command R7#deb qu  prio R7#deb priority ? R7#deb priority Priority output queueing debugging is on R7# *Mar 1 00:55:29.020: PQ: Serial1/0: ip -> normal R7#telnet        180.50 40 *Mar 1 00:55:34.809: PQ: Serial1/0: cdp -> normal *Mar 1 00:55:34.809: PQ: Serial1/0: cdp -> normal R7#180.540.7.40.7. 40.7.162 Trying 180.40.7.162 ... Open R2# R2# R2# R2# R2# *Mar 1 00:55:43.239: PQ: Serial1/0: ip -> normal *Mar 1 00:55:43.271: PQ: Serial1/0: ip -> normal *Mar 1 00:55:43.271: PQ: Serial1/0: ip -> normal *Mar 1 00:55:43.275: PQ: Serial1/0: ip -> normal *Mar 1 00:55:43.307: PQ: Serial1/0: ip -> normal *Mar 1 00:55:43.307: PQ: Serial1/0: ip -> normal *Mar 1 00:55:43.311: PQ: Serial1/0: ip -> normal *Mar 1 00:55:43.319: PQ: Serial1/0: ip -> normal *Mar 1 00:55:43.528: PQ: Serial1/0: ip -> normal *Mar 1 00:55:44.525: PQ: Serial1/0: ip -> normal *Mar 1 00:55:44.689: PQ: Serial1/0: ip -> normal *Mar 1 00:55:44.850: PQ: Serial1/0: ip -> normal *Mar 1 00:55:45.002: PQ: Serial1/0: ip -> normal *Mar 1 00:55:45.230: PQ: Serial1/0: ip -> normal *Mar 1 00:55:59.021: PQ: Serial1/0: ip -> normalint      *Mar 1 00:56:13.929: PQ: Serial1/0: ip -> normal *Mar 1 00:56:14.050: PQ: Serial1/0: ip -> normal *Mar 1 00:56:14.174: PQ: Serial1/0: ip -> normal *Mar 1 00:56:14.286: PQ: Serial1/0: ip -> normal *Mar 1 00:56:14.490: PQ: Serial1/0: ip -> normal *Mar 1 00:56:14.631: PQ: Serial1/0: ip -> normal *Mar 1 00:56:14.779: PQ: Serial1/0: ip -> normal *Mar 1 00:56:14.911: PQ: Serial1/0: ip -> normalconfi *Mar 1 00:56:14.999: PQ: Serial1/0: ip -> normal *Mar 1 00:56:15.111: PQ: Serial1/0: ip -> normal *Mar 1 00:56:15.256: PQ: Serial1/0: ip -> normal *Mar 1 00:56:15.484: PQ: Serial1/0: ip -> normal *Mar 1 00:56:15.616: PQ: Serial1/0: ip -> normal *Mar 1 00:56:15.716: PQ: Serial1/0: ip -> normal *Mar 1 00:56:15.837: PQ: Serial1/0: ip -> normal *Mar 1 00:56:15.909: PQ: Serial1/0: ip -> normal *Mar 1 00:56:15.981: PQ: Serial1/0: ip -> normal    % Ambiguous command: "con" R2# *Mar 1 00:56:16.081: PQ: Serial1/0: ip -> normal *Mar 1 00:56:16.309: PQ: Serial1/0: ip -> normal *Mar 1 00:56:16.397: PQ: Serial1/0: ip -> normal *Mar 1 00:56:16.538: PQ: Serial1/0: ip -> normal *Mar 1 00:56:16.698: PQ: Serial1/0: ip -> normal *Mar 1 00:56:16.930: PQ: Serial1/0: ip -> normal *Mar 1 00:56:16.970: PQ: Serial1/0: ip -> normalq [Connection to 180.40.7.162 closed by foreign host] R7# R7# R7# *Mar 1 00:56:17.203: PQ: Serial1/0: ip -> normal *Mar 1 00:56:17.567: PQ: Serial1/0: ip -> normal *Mar 1 00:56:17.680: PQ: Serial1/0: ip -> normal *Mar 1 00:56:17.836: PQ: Serial1/0: ip -> normal *Mar 1 00:56:17.844: PQ: Serial1/0: ip -> normal R7# R7#u all All possible debugging has been turned off R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0 R7(config-if)#pri R7(config-if)#priority-group 1                inter R7(config-if)#interf R7(config-if)#interf? % Unrecognized command R7(config-if)#interf      fram ? accounting Special accounting instruction address-reg ELMI address registration broadcast-queue Define a broadcast queue and transmit rate class Define a map class on the interface congestion-management Enable Frame Relay congestion management de-group Associate a DE group with a DLCI fragment Enable end-to-end fragmentation for all PVCs fragmentation Adaptive fragmentation ifmib-counter64 Support IF-MIB's total packet/byte counts of Counter64 on FR if/subif when main interface's ifSpeed < 20 Mbps interface-dlci Define a DLCI on an interface/subinterface interface-queue configure PVC interface queueing intf-type Configure a FR DTE/DCE/NNI interface inverse-arp Enable/disable FR inverse ARP ip Frame Relay Internet Protocol config commands lapf set LAPF parameter lmi-n391dte set full status polling counter lmi-n392dce LMI error threshold lmi-n392dte LMI error threshold lmi-n393dce set LMI monitored event count lmi-n393dte set LMI monitored event count lmi-t392dce set DCE polling verification timer --More--   R7(config-if)#fram in R7(config-if)#fram int R7(config-if)#fram inter R7(config-if)#fram interface-q R7(config-if)#fram interface-queue ? priority enable PVC interface priority queueing R7(config-if)#fram interface-queue pr R7(config-if)#fram interface-queue priority ? <1-1024> High limit R7(config-if)#fram interface-queue priority R7(config-if)#^Z R7# *Mar 1 00:57:00.922: %SYS-5-CONFIG_I: Configured from console by console R7#deb prio Priority output queueing debugging is on R7#deb prioconfi t u all 180.40.7.162 Trying 180.40.7.162 ... Open R2# *Mar 1 00:57:08.030: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:08.030: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:08.030: PQ: Serial1/0 output (Pk size/Q 48/2) *Mar 1 00:57:08.062: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:08.062: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:08.062: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 00:57:08.066: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:08.066: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:08.066: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:08.066: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:08.066: PQ: Serial1/0 output (Pk size/Q 56/2) *Mar 1 00:57:08.070: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 00:57:08.098: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:08.098: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:08.098: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 00:57:08.102: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:08.102: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:08.102: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:08.102: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:08.106: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 00:57:08.106: PQ: Serial1/0 output (Pk size/Q 53/2) *Mar 1 00:57:08.114: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:08.114: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:08.118: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 00:57:08.319: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:08.319: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:08.319: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 00:57:09.020: PQ: Serial1/0 output (Pk size/Q 13/0) R2# R2# R2# R2# *Mar 1 00:57:18.808: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:18.808: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:18.808: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 00:57:18.996: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:18.996: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:18.996: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 00:57:19.020: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 00:57:19.164: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:19.164: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:19.164: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 00:57:19.289: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:19.289: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:19.293: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 00:57:19.521: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:19.521: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:19.521: PQ: Serial1/0 output (Pk size/Q 44/2)q [Connection to 180.40.7.162 closed by foreign host] R7# *Mar 1 00:57:27.314: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:27.314: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:27.314: PQ: Serial1/0 output (Pk size/Q 45/2) *Mar 1 00:57:27.450: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:27.450: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:27.450: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 00:57:27.602: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:27.602: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:27.602: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 00:57:27.606: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 00:57:27.606: PQ: Serial1/0 dlci 702 -> normal R7#u all All possible debugging has been turned off R7# *Mar 1 00:57:27.610: PQ: Serial1/0 output (Pk size/Q 44/2) R7# *Mar 1 00:57:29.021: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 00:57:29.025: PQ: Serial1/0: ip (defaulting) -> normal *Mar 1 00:57:29.101: PQ: Serial1/0 dlci 702 -> normal *Mar 1 00:57:29.101: PQ: Serial1/0 output (Pk size/Q 84/2) R7#sh run | n   b 1/0 interface Serial1/0 no ip address encapsulation frame-relay frame-relay interface-queue priority ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 no ip address --More--   shutdown ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 --More--   log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ! no ip http server no ip http secure-server ! ip access-list standard S5 permit 208.28.1.2 ! priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! ! ! ! ! ! ! ! line con 0 --More--   R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/90  0.2 R7(config-subif)#int s 1/0.2fram interface-queue priority int s 1/0 do sh fram pvc 702 run int s 1/0.2fram priority-dlci-group 1 702 nfram priority-dlci-group 1 702 ofram priority-dlci-group 1 702  fram priority-dlci-group 1 702  R7(config-subif)# *Mar 1 00:58:41.700: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from FULL to DOWN, Neighbor Down: Interface down or detached R7(config-subif)#end R7# *Mar 1 00:58:44.829: %SYS-5-CONFIG_I: Configured from console by console R7#deb pri R7#deb pri % Ambiguous command: "deb pri" R7#deb prio R7#deb priority Priority output queueing debugging is on R7#deb priority  deb priority  confi tsh run | b 1/0u all 180.40.7.162 Trying 180.40.7.162 ... Open R2# *Mar 1 00:58:59.024: PQ: Serial1/0 output (Pk size/Q 13/0) R2# R2# R2#q [Connection to 180.40.7.162 closed by foreign host] R7# R7# R7#u a *Mar 1 00:59:04.838: PQ: Serial1/0 dlci 703 -> normal *Mar 1 00:59:04.838: PQ: Serial1/0 output (Pk size/Q 80/2) R7#u all All possible debugging has been turned off R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#map R7(config)#map-c R7(config)#map-class fr R7(config)#map-class frame-relay Prob6 R7(config-map-class)#fra R7(config-map-class)#frame-relay ? adaptive-shaping Adaptive traffic rate adjustment, Default = none bc Committed burst size (Bc), Default = 7000 bits be Excess burst size (Be), Default = 0 bits cir Committed Information Rate (CIR), Default = 56000 bps congestion Congestion management parameters custom-queue-list VC custom queueing end-to-end Configure frame-relay end-to-end VC parameters fair-queue VC fair queueing fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fragment fragmentation - Requires Frame Relay traffic-shaping to be configured at the interface level holdq Hold queue size for VC idle-timer Idle timeout for a SVC, Default = 120 sec interface-queue PVC interface queue parameters ip Assign a priority queue for RTP streams mincir Minimum acceptable CIR, Default = CIR/2 bps priority-group VC priority queueing tc Policing Measurement Interval (Tc) traffic-rate VC traffic rate voice voice options R7(config-map-class)#frame-relay priority-group 1 ? R7(config-map-class)#frame-relay priority-group 1 R7(config-map-class)#it nt s 1/0.2 R7(config-subif)#fra R7(config-subif)#fram R7(config-subif)#frame-relay cas  lass Prob6 R7(config-subif)# *Mar 1 00:59:50.941: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from LOADING to FULL, Loading Done R7(config-subif)#do sh fram pvc 702 PVC Statistics for interface Serial1/0 (Frame Relay DTE) DLCI = 702, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.2 input pkts 297 output pkts 289 in bytes 40702 out bytes 41104 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 64 out DE pkts 0 out bcast pkts 185 out bcast bytes 33480 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 00:59:42, last time pvc status changed 00:59:42 R7(config-subif)#  do sh traff R7(config-subif)#int s 1/0 R7(config-if)#fram R7(config-if)#frame-relay traff R7(config-if)#frame-relay traffic-shaping R7(config-if)#frame-relay traffic-shaping int s 1/0 do sh trafffram pvc 702 PVC Statistics for interface Serial1/0 (Frame Relay DTE) DLCI = 702, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.2 input pkts 299 output pkts 291 in bytes 41142 out bytes 41544 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 64 out DE pkts 0 out bcast pkts 187 out bcast bytes 33920 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 01:00:09, last time pvc status changed 01:00:09 cir 56000 bc 7000 be 0 byte limit 875 interval 125 mincir 28000 byte increment 875 Adaptive Shaping none pkts 1 bytes 356 pkts delayed 0 bytes delayed 0 shaping inactive traffic shaping drops 0 Queueing strategy: priority-list 1 List Queue Args 1 high protocol ip tcp port telnet --More--   List Queue Args 1 low protocol ip tcp port www Output queue: high 0/20/0, medium 0/40/0, normal 0/60/0, low 0/80/0 R7(config-if)#^Z R7#d *Mar 1 01:00:45.747: %SYS-5-CONFIG_I: Configured from console by console R7#deb prio Priority output queueing debugging is on R7#deb prioconfi t u all 180.40.7.162 Trying 180.40.7.162 ... Open R2# *Mar 1 01:00:52.085: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:00:52.085: PQ: Serial1/0 output (Pk size/Q 48/2) *Mar 1 01:00:52.117: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:00:52.117: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:00:52.121: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:00:52.121: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:00:52.125: PQ: Serial1/0 output (Pk size/Q 56/2) *Mar 1 01:00:52.125: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:00:52.158: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:00:52.158: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 01:00:52.158: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:00:52.158: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:00:52.162: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 01:00:52.162: PQ: Serial1/0 output (Pk size/Q 53/2) *Mar 1 01:00:52.170: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:00:52.174: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 01:00:52.374: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:00:52.374: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:00:55.739: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:00:55.739: PQ: Serial1/0 output (Pk size/Q 45/2) *Mar 1 01:00:55.968: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:00:55.968: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:00:59.053: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:00:59.105: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:00:59.105: PQ: Serial1/0 output (Pk size/Q 84/2) *Mar 1 01:01:04.914: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:01:04.914: PQ: Serial1/0 output (Pk size/Q 80/2) *Mar 1 01:01:09.053: PQ: Serial1/0 output (Pk size/Q 13/0) R2# R2#q [Connection to 180.40.7.162 closed by foreign host] R7# *Mar 1 01:01:12.198: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:01:12.198: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 01:01:12.355: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:01:12.355: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 01:01:12.547: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:01:12.547: PQ: Serial1/0 output (Pk size/Q 45/2) *Mar 1 01:01:12.671: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:01:12.675: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 01:01:12.827: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:01:12.827: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:01:12.827: PQ: Serial1/0 dlci 702 -> normal R7# *Mar 1 01:01:12.831: PQ: Serial1/0 output (Pk size/Q 44/2) R7#u all All possible debugging has been turned off R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int   ^Z % Incomplete command. R7#s *Mar 1 01:01:45.737: %SYS-5-CONFIG_I: Configured from console by console R7#sh fram pvc 702 PVC Statistics for interface Serial1/0 (Frame Relay DTE) DLCI = 702, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.2 input pkts 321 output pkts 311 in bytes 42598 out bytes 42858 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 82 out DE pkts 0 out bcast pkts 190 out bcast bytes 34444 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 01:01:22, last time pvc status changed 01:01:22 cir 56000 bc 7000 be 0 byte limit 875 interval 125 mincir 28000 byte increment 875 Adaptive Shaping none pkts 21 bytes 1670 pkts delayed 0 bytes delayed 0 shaping inactive traffic shaping drops 0 Queueing strategy: priority-list 1 List Queue Args 1 high protocol ip tcp port telnet --More--   List Queue Args 1 low protocol ip tcp port www Output queue: high 0/20/0, medium 0/40/0, normal 0/60/0, low 0/80/0 R7#sh run int s 1/0.1 2 Building configuration... Current configuration : 182 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay class Prob6 frame-relay interface-dlci 702 end R7#sh run | b map-clas map-class frame-relay Prob6 frame-relay priority-group 1 priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login ! ! end --More--   R7# R7# R7# R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0 R7(config-if)#pri R7(config-if)#priority-group 1 Cannot change interface queuing when Frame-Relay traffic-shapi ng is configured R7(config-if)#no framm  R7(config-if)#no frame-relay tradd  ff R7(config-if)#pri R7(config-if)#priority-group 1 Cannot change interface queueing when Frame-Relay interface queueing is configured R7(config-if)#priority-group 1 no fra inter % Ambiguous command: "no fra inter" R7(config-if)#no fra inter      m R7(config-if)#no frame-relay inter R7(config-if)#no frame-relay interface-q R7(config-if)#no frame-relay interface-queue % Incomplete command. R7(config-if)#no frame-relay interface-queue pr R7(config-if)#no frame-relay interface-queue priority R7(config-if)#no frame-relay interface-queue priority  priority-group 1  R7(config-if)#end R7#deb p *Mar 1 01:03:44.532: %SYS-5-CONFIG_I: Configured from console by console R7#deb prio Priority output queueing debugging is on R7#deb prioconfi t sh run | b map-clasint s 1/0.2 fram pvc 702  *Mar 1 01:03:49.060: PQ: Serial1/0 output (Pk size/Q 13/0) R7#sh fram pvc 702confi t u all 180.40.7.162 Trying 180.40.7.162 ... Open R2# *Mar 1 01:03:53.507: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:03:53.507: PQ: Serial1/0 output (Pk size/Q 48/0) *Mar 1 01:03:53.539: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:03:53.543: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 1 01:03:53.543: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:03:53.543: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:03:53.547: PQ: Serial1/0 output (Pk size/Q 56/0) *Mar 1 01:03:53.547: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 1 01:03:53.579: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:03:53.579: PQ: Serial1/0 output (Pk size/Q 47/0) *Mar 1 01:03:53.579: PQ: Serial1/0: ip (tcp 23) -> high R2# R2# R2# R2# *Mar 1 01:03:53.579: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:03:53.583: PQ: Serial1/0 output (Pk size/Q 47/0) *Mar 1 01:03:53.583: PQ: Serial1/0 output (Pk size/Q 53/0) *Mar 1 01:03:53.591: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:03:53.595: PQ: Serial1/0 output (Pk size/Q 47/0) *Mar 1 01:03:53.795: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:03:53.795: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 1 01:03:54.601: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:03:54.601: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 1 01:03:54.829: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:03:54.829: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 1 01:03:54.949: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:03:54.949: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 1 01:03:55.101: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:03:55.105: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 1 01:03:55.226: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:03:55.226: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 1 01:03:55.454: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:03:55.454: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 1 01:03:59.060: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:03:59.160: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 1 01:04:04.869: PQ: Serial1/0 output (Pk size/Q 80/0) *Mar 1 01:04:09.060: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:04:19.061: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:04:29.061: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:04:29.109: PQ: Serial1/0 output (Pk size/Q 84/0) *Mar 1 01:04:34.919: PQ: Serial1/0 output (Pk size/Q 80/0) *Mar 1 01:04:34.919: PQ: Serial1/0: cdp (defaulting) -> normal *Mar 1 01:04:34.919: PQ: Serial1/0: cdp (defaulting) -> normal *Mar 1 01:04:34.927: PQ: Serial1/0 output (Pk size/Q 356/2) *Mar 1 01:04:34.927: PQ: Serial1/0 output (Pk size/Q 356/2) *Mar 1 01:04:39.061: PQ: Serial1/0 output (Pk size/Q 13/0)q [Connection to 180.40.7.162 closed by foreign host] R7# R7# *Mar 1 01:04:45.692: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:04:45.692: PQ: Serial1/0 output (Pk size/Q 45/0) *Mar 1 01:04:45.768: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:04:45.768: PQ: Serial1/0 output (Pk size/Q 46/0) *Mar 1 01:04:45.921: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:04:45.921: PQ: Serial1/0 output (Pk size/Q 44/0) *Mar 1 01:04:45.925: PQ: Serial1/0: ip (tcp 23) -> high *Mar 1 01:04:45.925: PQ: Serial1/0 output (Pk size/Q 44/0) R7# R7# R7# R7# R7# *Mar 1 01:04:49.062: PQ: Serial1/0 output (Pk size/Q 13/0) R7# *Mar 1 01:04:59.062: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:04:59.162: PQ: Serial1/0 output (Pk size/Q 84/0) R7# *Mar 1 01:05:04.872: PQ: Serial1/0 output (Pk size/Q 80/0) R7#u all All possible debugging has been turned off R7# *Mar 1 01:05:09.063: PQ: Serial1/0 output (Pk size/Q 13/0) R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/90  0 R7(config-if)#int s 1/0end priority-group 1npriority-group 1opriority-group 1 priority-group 1 R7(config-if)#traff R7(config-if)#traffic-shape               fram traff R7(config-if)#^Z R7#d *Mar 1 01:05:34.917: %SYS-5-CONFIG_I: Configured from console by console R7#deb prio Priority output queueing debugging is on R7#deb prioconfi t u all 180.40.7.162 Trying 180.40.7.162 ... Open R2# R2# R2# R2#q [Connection to 180.40.7.162 closed by foreign host] R7#sh run        sh fram pvc 702 PVC Statistics for interface Serial1/0 (Frame Relay DTE) DLCI = 702, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.2 input pkts 376 output pkts 364 in bytes 46887 out bytes 47062 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 122 out DE pkts 0 out bcast pkts 203 out bcast bytes 36624 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 01:05:32, last time pvc status changed 01:05:32 cir 56000 bc 7000 be 0 byte limit 875 interval 125 mincir 28000 byte increment 875 Adaptive Shaping none pkts 20 bytes 1275 pkts delayed 0 bytes delayed 0 shaping inactive traffic shaping drops 0 Queueing strategy: priority-list 1 List Queue Args 1 high protocol ip tcp port telnet --More--   List Queue Args 1 low protocol ip tcp port www Output queue: high 0/20/0, medium 0/40/0, normal 0/60/0, low 0/80/0 R7#sh fram pvc 702 sh    sh fram pvc 702180.40.7.162  Trying 180.40.7.162 ... Open R2# R2# R2# R2# R2#q q [Connection to 180.40.7.162 closed by foreign host] R7# R7#conbfi t ^ % Invalid input detected at '^' marker. R7#o confit Translating "confit" Translating "confit" % Unknown command or computer name, or unable to find computer address R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0 R7(config-if)#fram ? accounting Special accounting instruction address-reg ELMI address registration broadcast-queue Define a broadcast queue and transmit rate class Define a map class on the interface congestion-management Enable Frame Relay congestion management de-group Associate a DE group with a DLCI fragment Enable end-to-end fragmentation for all PVCs fragmentation Adaptive fragmentation ifmib-counter64 Support IF-MIB's total packet/byte counts of Counter64 on FR if/subif when main interface's ifSpeed < 20 Mbps interface-dlci Define a DLCI on an interface/subinterface interface-queue configure PVC interface queueing intf-type Configure a FR DTE/DCE/NNI interface inverse-arp Enable/disable FR inverse ARP ip Frame Relay Internet Protocol config commands lapf set LAPF parameter lmi-n391dte set full status polling counter lmi-n392dce LMI error threshold lmi-n392dte LMI error threshold lmi-n393dce set LMI monitored event count lmi-n393dte set LMI monitored event count lmi-t392dce set DCE polling verification timer --More--   lmi-type Use CISCO-ANSI-CCITT type LMI local-dlci Set source DLCI when LMI is not supported map Map a protocol address to a DLCI address multicast-dlci Set DLCI of a multicast group policing Enable Frame Relay policing priority-dlci-group Define a priority group of DLCIs qos-autosense enable QOS autosense route frame relay route for pvc switching svc Enable frame relay SVCs traffic-shaping Enable Frame Relay Traffic Shaping traps-maximum set max traps FR generates at link up or when getting LMI Full Status message vc-bundle configure a frame-relay vc-bundle R7(config-if)#fram inter R7(config-if)#fram interface-p R7(config-if)#fram interface-p q R7(config-if)#fram interface-queue ? priority enable PVC interface priority queueing R7(config-if)#fram interface-queue p R7(config-if)#fram interface-queue priority ? <1-1024> High limit R7(config-if)#fram interface-queue priority R7(config-if)#^Z R7#~ *Mar 1 01:07:34.890: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:07:34.890: PQ: Serial1/0 output (Pk size/Q 80/2) *Mar 1 01:07:34.890: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:07:34.890: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:34.898: PQ: Serial1/0 output (Pk size/Q 356/2) *Mar 1 01:07:34.898: PQ: Serial1/0 output (Pk size/Q 356/2) R7#~~ *Mar 1 01:07:35.342: %SYS-5-CONFIG_I: Configured from console by console R7#~~confi tt bfi t *Mar 1 01:07:39.069: PQ: Serial1/0 output (Pk size/Q 13/0) R7#conbfi t180.40.7.162 Trying 180.40.7.162 ... Open R2# *Mar 1 01:07:41.977: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:41.977: PQ: Serial1/0 output (Pk size/Q 48/2) *Mar 1 01:07:42.009: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:42.009: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:07:42.009: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:42.013: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:42.013: PQ: Serial1/0 output (Pk size/Q 56/2) *Mar 1 01:07:42.013: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:07:42.045: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:42.045: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 01:07:42.049: PQ: Serial1/0 dlci 702 -> normal R2# R2# R2# *Mar 1 01:07:42.049: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:42.053: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 01:07:42.053: PQ: Serial1/0 output (Pk size/Q 53/2) *Mar 1 01:07:42.061: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:42.065: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 01:07:42.266: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:42.266: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:07:43.051: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:43.051: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 01:07:43.279: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:43.279: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:07:43.287: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:43.287: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 01:07:43.460: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:43.460: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 01:07:43.692: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:43.692: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:07:44.129: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:44.129: PQ: Serial1/0 output (Pk size/Q 88/2)q  *Mar 1 01:07:46.248: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:46.248: PQ: Serial1/0 output (Pk size/Q 45/2) *Mar 1 01:07:46.477: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:46.477: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:07:47.094: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:47.094: PQ: Serial1/0 output (Pk size/Q 45/2) *Mar 1 01:07:47.322: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:47.322: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:07:47.354: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:47.354: PQ: Serial1/0 output (Pk size/Q 45/2) *Mar 1 01:07:47.587: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:47.587: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:07:49.069: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:07:59.069: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:07:59.129: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:07:59.129: PQ: Serial1/0 output (Pk size/Q 84/2)q  *Mar 1 01:08:04.939: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:08:04.939: PQ: Serial1/0 output (Pk size/Q 80/2) *Mar 1 01:08:05.488: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:05.488: PQ: Serial1/0 output (Pk size/Q 45/2) *Mar 1 01:08:05.716: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:05.716: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:08:05.977: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:05.977: PQ: Serial1/0 output (Pk size/Q 45/2) *Mar 1 01:08:06.205: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:06.205: PQ: Serial1/0 output (Pk size/Q 44/2)q [Connection to 180.40.7.162 closed by foreign host] R7# R7# *Mar 1 01:08:09.070: PQ: Serial1/0 output (Pk size/Q 13/0) R7# *Mar 1 01:08:10.075: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:10.079: PQ: Serial1/0 output (Pk size/Q 45/2) *Mar 1 01:08:10.208: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:10.208: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 01:08:10.360: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:10.360: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:08:10.364: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:10.368: PQ: Serial1/0 output (Pk size/Q 44/2) R7#co nfi t % Ambiguous command: "co nfi t" R7#config t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#serv R7(config)#service tc R7(config)#service tcp-s R7(config)#service tcp-small-servers R7(config)# *Mar 1 01:08:19.070: PQ: Serial1/0 output (Pk size/Q 13/0) R7(config)#^Z R7#config t nfi t *Mar 1 01:08:21.394: %SYS-5-CONFIG_I: Configured from console by console R7#co nfi t180.40.7.162 *Mar 1 01:08:29.071: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:08:29.103: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:29.103: PQ: Serial1/0 output (Pk size/Q 84/2) R7#180.40.7.162co nfi t nfig t nfi tnfig t config t nfi t180.40.7.162 Trying 180.40.7.162 ... Open R2# *Mar 1 01:08:34.912: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:08:34.912: PQ: Serial1/0 output (Pk size/Q 80/2) *Mar 1 01:08:34.912: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:08:34.912: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:34.920: PQ: Serial1/0 output (Pk size/Q 356/2) *Mar 1 01:08:34.920: PQ: Serial1/0 output (Pk size/Q 356/2) *Mar 1 01:08:36.278: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:36.278: PQ: Serial1/0 output (Pk size/Q 48/2) *Mar 1 01:08:36.310: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:36.310: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:08:36.314: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:36.314: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:36.314: PQ: Serial1/0 output (Pk size/Q 56/2) *Mar 1 01:08:36.318: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:08:36.346: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:36.346: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 01:08:36.350: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:36.350: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:36.354: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 01:08:36.354: PQ: Serial1/0 output (Pk size/Q 53/2) *Mar 1 01:08:36.362: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:36.366: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 01:08:36.567: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:36.567: PQ: Serial1/0 output (Pk size/Q 44/2) RACK15AS>2 [Resuming connection 2 to r2 ... ] *Mar 2 R2#180.40.7.15 61 19 Trying 180.40.7.161, 19 ... Open !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefg !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefgh "#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghi #$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghij $%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijk %&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijkl &'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklm '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmn ()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmno )*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnop *+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq +,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr ,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrs -./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrst ./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstu /0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuv 0123456789:;<=>?@ABCDEFGHIJKLMNOP RACK15AS>7 [Resuming connection 7 to r7 ... ] *M 1 01:08:48.562: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:48.566: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:48.566: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:48.566: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:48.570: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:48.570: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:48.570: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.570: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:48.574: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:48.574: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:48.574: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:48.579: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:48.579: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:48.579: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:48.583: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:48.587: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.603: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.619: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.631: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.639: PQ: Serial1/0 dlci R2# 702 -> normal *Mar 1 01:08:48.647: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.647: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.663: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.663: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.679: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.679: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.695: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.695: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.707: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.711: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.723: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.723: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.739: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.763: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.771: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.771: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.771: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.771: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.787: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.787: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.799: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.803: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.815: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.815: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.831: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.831: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.847: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.887: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.887: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.887: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.887: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.887: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.899: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.899: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.915: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.915: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.931: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.931: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.947: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.947: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.963: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:48.963: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:48.975: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.071: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:08:49.5 R2#84: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.584: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.584: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.584: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.588: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.588: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.588: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.592: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.592: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.592: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.596: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.596: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.596: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.596: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.600: PQ: Seri R2# R2# R2# R2#al1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.600: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.600: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.604: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.604: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.604: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.608: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.608: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.608: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.608: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.612: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.612: PQ: Serial1/0 output (Pk size/Q R2# R2#118/2) *Mar 1 01:08:49.612: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.616: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.616: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.616: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.620: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.620: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.620: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.624: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.624: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.624: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.624: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.628: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.628: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.628: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:49.644: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.660: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.672: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.708: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.708: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.708: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.708: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.708: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.720: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.720: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.736: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.736: PQ: Serial1/ R2#0 dlci 702 -> normal *Mar 1 01:08:49.752: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.752: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.768: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.768: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.784: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.837: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.837: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.837: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.837: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.837: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.849: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.849: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.865: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.865: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.881: PQ: S R2# R2#erial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.881: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.897: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.897: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.913: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.913: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.925: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.969: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.969: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.969: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.969: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.969: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.981: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.985: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:49.997: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:49.997: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.013: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.013: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.029: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.029: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.045: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.085: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.085: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.085: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.085: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.085: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.097: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.097: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.113: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.113: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.129: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.630: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.630: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.630: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.630: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.634: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.634: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.634: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.638: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.638: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.638: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.642: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.642: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.642: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.642: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.646: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.646: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.646: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.650: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.650: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.650: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.654: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.654: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.654: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.654: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.658: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.658: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.658: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.662: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.662: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.662: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.666: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:50.674: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.690: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.706: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.718: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.758: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.758: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.758: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.758: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.758: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.770: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.770: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.786: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.786: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.802: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.802: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.818: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.818: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.834: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.882: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.882: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.882: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.882: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.882: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.894: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.894: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.910: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.910: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.926: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.926: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.942: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.942: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.958: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.958: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:50.970: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:50.978: PQ: Serial1/0.2 dlci 702: ip (tcp 23) -> high *Mar 1 01:08:51.006: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:51.006: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 01:08:51.006: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:51.006: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:51.006: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:51.010: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:51.010: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:51.027: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:51.027: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:51.043: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:51.243: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:51.243: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:08:51.668: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:51.668: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:51.668: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:51.668: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:51.672: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:51.672: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:51.672: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:51.680: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:51.680: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:51.696: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:51.712: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:51.728: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:52.673: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:52.673: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:08:52.673: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:52.673: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:52.677: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:52.677: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:52.677: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:52.681: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:52.681: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:08:52.681: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:08:52.685: PQ: Serial1/0.2 d RACK15AS>2 [Resuming connection 2 to r2 ... ] TUVWXYZ[\]^_`abcdefghijklmnopqrstuvw opqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEF _`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFG `abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGH abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHI bcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJ cdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJK defghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKL efghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLM fghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMN ghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNO hijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOP ijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQ jklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQR klmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRS lmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRST mnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTU nopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUV opqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW pqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJK LMNOPQRSTUVWX qrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXY rstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ stuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[ tuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\ uvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\] vwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^ wxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ xyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_` yz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`a z{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`ab {|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abc |}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcd }~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcde ~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdef !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefg !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefgh "#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghi #$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghij $%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijk %&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijkl &'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklm '()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmn ()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmno )*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnop *+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopq +,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr ,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrs -./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrst ./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstu /0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuv 0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvw 123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwx 23456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxy 3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz 456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{ 56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{| 6789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|} 789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 89:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ 9:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ ! :;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !" ;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"# <=>?@ABCDEFGHIJKLMNOPQRSTUVyz{|}~ !"#$%&'()*+,-./01 JKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012 KLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123 LMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234 MNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345 NOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456 OPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./01234567 PQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./012345678 QRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789 RSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789: STUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:; TUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;< R2# [Special telnet escape help] ^^B sends telnet BREAK ^^C sends telnet IP ^^H sends telnet EC ^^O sends telnet AO ^^T sends telnet AYT ^^U sends telnet EL [Resuming connection 1 to 180.40.7.161 ... ] UVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<= VWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=> WXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>? XYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ YZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@A Z[\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@AB [\]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABC \]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCD ]^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDE ^_`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEF _`abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFG `abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGH abcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHI bcdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJ cdefghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJK defghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKL efghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLM fghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMN ghijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNO hijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOP ijklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQ jklmnopqrstuvwxyz{|}~ !"#$%&'()*+,-./0123456789: R2#d5sc Translating "d5sc" Translating "d5sc" % Unknown command or computer name, or unable to find computer address R2#disc5sc Translating "d5sc" Translating "d5sc" % Unknown command or computer name, or unable to find computer address R2#disc Closing connection to 180.40.7.161 [confirm] R2# RACK15AS>7 [Resuming connection 7 to r7 ... ] p (defaulting) -> normal *Mar 1 01:08:52.685Mar 1 01:09:01.904: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:01.940: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:01.940: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:01.940: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:01.940: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:01.940: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:01.952: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:01.952: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:01.968: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:01.968: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:01.984: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:01.984: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:02.001: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:02.001: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:02.017: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:02.069: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:02.069: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:0 R2#2.069: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:02.069: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:02.838: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:02.838: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:02.838: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:02.838: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:02.842: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:02.850: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:02.850: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:02.866: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:03.844: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:03.844: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:03.844: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:03.844: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:03.848: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:03.848: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:03.848: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:03.852: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:03.852: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:03.852: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:03.856: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:03.856: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:03.856: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:03.856: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:03.856: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:03.860: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:03.860: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:03.860: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:03.864: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:03.864: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:03.872: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:03.888: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:03.904: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:03.920: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:03.932: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:03.972: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:03.972: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:03.972: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:03.972: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:03.972: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:03.984: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:03.984: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.000: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.000: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.016: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.016: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.032: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.032: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.048: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.104: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.104: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.104: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.104: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.865: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.865: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.865: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.865: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.869: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.869: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.869: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.873: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.873: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.873: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:04.877: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:04.877: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:04.877: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:04.877: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.877: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.881: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:04.881: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:04.881: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:04.885: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:04.885: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:04.885: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:04.889: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:04.889: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:04.893: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.909: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.917: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:09:04.925: PQ: Serial1/0 output (Pk size/Q 80/2) *Mar 1 01:09:04.941: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.949: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.965: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.989: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.997: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.997: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:04.997: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:04.997: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.013: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:05.013: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.025: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:05.029: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.041: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:05.041: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.058: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:05.058: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.074: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:05.118: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.118: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:05.118: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.118: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:05.118: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.130: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:05.130: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.146: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:05.146: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.162: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:05.891: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.891: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:05.891: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.895: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.895: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.895: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:05.903: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:05.903: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:05.919: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:05.935: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:06.897: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:06.897: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:06.897: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:06.897: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:06.901: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:06.901: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:06.901: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:06.905: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:06.905: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:06.905: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:06.909: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:06.909: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:06.909: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:06.909: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:06.909: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:06.913: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:06.913: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:06.913: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:06.917: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:06.917: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:06.925: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:06.941: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:06.957: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:06.973: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:06.985: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:07.025: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:07.025: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:07.025: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:07.025: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:07.025: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:07.037: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:07.037: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:07.053: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:07.053: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:07.069: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:07.069: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:07.085: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:07.085: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:07.101: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:07.149: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:07.149: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:07.149: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:07.149: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:07.918: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:07.918: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:07.918: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:07.918: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:07.922: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:07.930: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:07.930: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:07.946: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:08.924: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:08.924: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:08.924: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:08.924: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:08.928: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:08.928: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:08.928: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:08.932: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:08.932: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:08.932: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:08.936: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:08.936: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:08.936: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:08.936: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:08.940: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:08.940: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:08.940: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:08.940: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:08.944: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:09.064: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:09.064: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:09.080: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:09:09.096: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:09.096: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:09.096: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:09.096: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:09.112: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:09.112: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:09.128: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:09.176: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:09.176: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:09.176: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:09.176: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:09.946: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:09.946: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:09.946: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:09.946: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:09.950: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:09.958: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:09.958: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:09.974: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:11.087: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:11.103: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:11.103: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:11.119: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:11.119: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:11.135: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:11.135: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:11.152: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:11.204: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:11.204: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:11.204: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:11.204: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:11.740: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:11.740: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:09:11.973: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:11.973: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:11.973: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:11.973: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:11.977: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:11.977: PQ: Ser ial1/0 dlci 702 -> normal *Mar 1 01:09:11.977: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:11.981: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:11.981: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:12.125: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:12.125: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:12.141: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:12.141: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:12.153: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:12.157: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:12.169: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:12.169: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:12.185: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:12.201: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:12.217: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:12.233: PQ: q [Connection to 180.40.7.162 closed by foreign host] R7# R7# R7#Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:12.245: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:12.999: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:12.999: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:12.999: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:12.999: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:13.003: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:13.003: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:13.011: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:13.011: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:13.027: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:13.043: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:14.004: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:14.004: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:14.004: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:14.004: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:14.008: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:14.008: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:14.008: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:14.012: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:14.012: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:14.012: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:14.140: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:14.140: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:14.156: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:14.156: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:14.172: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:14.172: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:14.188: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:14.188: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:14.205: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:14.257: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:14.257: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:14.257: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:14.257: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:15.026: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:15.026: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:15.026: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:15.030: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:15.030: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:15.038: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:15.038: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:15.054: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:16.032: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:16.032: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:16.032: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:16.032: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:16.036: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:16.036: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:16.036: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:16.040: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:16.040: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:16.040: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:16.044: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:16.188: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:16.204: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:16.204: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:16.220: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:16.220: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:16.236: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:16.284: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:16.284: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:16.284: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:16.284: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:16.284: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:17.213: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:17.213: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:17.225: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:17.225: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:17.241: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:17.241: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:17.258: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:17.258: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:17.274: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:17.274: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:17.290: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:17.342: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:17.342: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:17.342: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:17.342: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:17.342: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:17.354: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:17.354: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:17.370: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:17.370: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:17.386: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:17.386: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:18.223: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:18.235: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:18.275: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:18.275: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:18.275: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:18.275: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:18.275: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:18.287: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:18.287: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:18.303: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:18.303: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:19.233: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:19.233: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:19.237: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:19.237: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:19.237: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:19.249: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:19.249: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:19.253: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:19.253: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:19.734: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:19.750: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:19.750: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:19.766: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:19.766: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:19.782: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:19.782: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:19.794: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:19.830: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:19.830: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:20.266: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:20.266: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:20.266: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:20.266: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:20.270: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:20.270: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:20.270: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:20.274: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:20.274: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:20.274: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:20.278: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:20.278: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:20.294: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:20.311: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:20.327: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:20.343: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:20.355: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:20.395: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:20.395: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:21.276: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:21.276: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:21.276: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:21.276: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:21.913: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:21.929: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:22.334: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:22.334: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:22.334: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:22.334: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:22.338: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:22.338: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:22.338: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:22.342: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:22.342: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:22.959: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:22.959: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:22.959: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:22.959: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:22.971: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:22.971: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:22.987: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:23.392: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:23.392: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:23.392: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:23.392: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:23.396: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:23.396: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:23.396: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:23.400: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:23.400: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:23.400: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:23.404: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:23.404: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:23.404: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:23.404: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:24.029: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:24.045: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:24.449: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:24.449: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:24.449: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:24.449: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:24.453: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:24.453: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:24.453: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:24.457: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:24.457: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:25.074: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:25.074: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:25.074: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:25.074: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:25.086: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:25.086: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:25.102: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:25.507: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:25.507: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:25.507: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:25.507: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:26.144: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:26.160: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:26.569: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:26.569: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:26.569: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:26.573: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:26.573: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:26.573: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:26.573: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:26.577: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:26.577: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:26.577: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:26.581: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:26.581: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:26.581: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:26.581: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:26.585: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:26.585: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:26.585: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:26.585: PQ: Serial1/0.2 dlci 702 : ip (defaulting) -> normal *Mar 1 01:09:27.194: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:27.194: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:27.194: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:27.194: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:27.206: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:27.206: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:27.222: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:27.627: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:27.627: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:27.627: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:27.627: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:28.264: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:28.280: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:28.684: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:28.684: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:28.684: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:28.684: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:28.688: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:28.688: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:28.688: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:28.692: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:28.692: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:29.309: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:29.309: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:29.309: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:29.309: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:29.309: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:29.321: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:29.321: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:29.337: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:29.337: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:29.353: PQ: Serial1/0 output (Pk size/Q 118/2) *Mar 1 01:09:29.458: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:29.458: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:09:29.742: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:29.742: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 01:09:29.742: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:29.746: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:09:31.581: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:31.581: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 01:09:31.809: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:31.809: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:09:34.886: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:09:34.886: PQ: Serial1/0 output (Pk size/Q 356/2) *Mar 1 01:09:34.886: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:34.886: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:09:34.930: PQ: Serial1/0 output (Pk size/Q 80/2) *Mar 1 01:09:34.930: PQ: Serial1/0 output (Pk size/Q 356/2) *Mar 1 01:09:39.073: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:09:48.344: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:48.344: PQ: Serial1/0 output (Pk size/Q 45/2) *Mar 1 01:09:48.573: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:48.573: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:09:48.994: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:48.994: PQ: Serial1/0 output (Pk size/Q 45/2) *Mar 1 01:09:49.074: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:09:49.106: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:49.106: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 01:09:49.254: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:49.258: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:09:49.258: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:49.262: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:09:59.074: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:09:59.130: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:09:59.130: PQ: Serial1/0 output (Pk size/Q 84/2) *Mar 1 01:10:04.940: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:10:04.940: PQ: Serial1/0 output (Pk size/Q 80/2) R7# R7# *Mar 1 01:10:09.074: PQ: Serial1/0 output (Pk size/Q 13/0) R7# *Mar 1 01:10:19.075: PQ: Serial1/0 output (Pk size/Q 13/0) R7# *Mar 1 01:10:29.075: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:10:29.179: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:10:29.179: PQ: Serial1/0 output (Pk size/Q 84/2) R7# *Mar 1 01:10:34.889: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:10:34.889: PQ: Serial1/0 output (Pk size/Q 356/2) *Mar 1 01:10:34.889: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:10:34.889: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:10:34.933: PQ: Serial1/0 output (Pk size/Q 80/2) *Mar 1 01:10:34.933: PQ: Serial1/0 output (Pk size/Q 356/2) R7# *Mar 1 01:10:39.076: PQ: Serial1/0 output (Pk size/Q 13/0) R7# *Mar 1 01:10:49.076: PQ: Serial1/0 output (Pk size/Q 13/0) R7# *Mar 1 01:10:59.076: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:10:59.129: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:10:59.129: PQ: Serial1/0 output (Pk size/Q 84/2) R7# *Mar 1 01:11:04.938: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:11:04.938: PQ: Serial1/0 output (Pk size/Q 80/2) R7# *Mar 1 01:11:09.077: PQ: Serial1/0 output (Pk size/Q 13/0) R7# *Mar 1 01:11:19.077: PQ: Serial1/0 output (Pk size/Q 13/0) R7# *Mar 1 01:11:29.078: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:11:29.178: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:11:29.178: PQ: Serial1/0 output (Pk size/Q 84/2) R7# *Mar 1 01:11:34.887: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:11:34.887: PQ: Serial1/0 output (Pk size/Q 356/2) *Mar 1 01:11:34.887: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:11:34.887: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:11:34.931: PQ: Serial1/0 output (Pk size/Q 80/2) *Mar 1 01:11:34.931: PQ: Serial1/0 output (Pk size/Q 356/2) R7# *Mar 1 01:11:39.078: PQ: Serial1/0 output (Pk size/Q 13/0) R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int *Mar 1 01:11:49.078: PQ: Serial1/0 output (Pk size/Q 13/0) R7(config)#int s 1/0 R7(config-if)#fram cas l  lass Prob *Mar 1 01:11:59.079: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:11:59.143: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:11:59.143: PQ: Serial1/0 output (Pk size/Q 84/2) R7(config-if)#fram class Prob6 R7(config-if)# *Mar 1 01:12:04.872: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:12:04.876: PQ: Serial1/0 output (Pk size/Q 80/2) R7(config-if)# *Mar 1 01:12:09.079: PQ: Serial1/0 output (Pk size/Q 13/0) R7(config-if)#int s 1/0.1 R7(config-subif)#no fram ma    class Prob6 R7(config-subif)# *Mar 1 01:12:19.080: PQ: Serial1/0 output (Pk size/Q 13/0) R7(config-subif)#do sh run | b 1/0 interface Serial1/0 no ip address encapsulation frame-relay frame-relay class Prob6 frame-relay traffic-shaping frame-relay interface-queue priority ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay class Prob6 frame-relay interface-dlci 702 ! interface Serial1/1 no ip address shutdown ! --More-- *Mar 1 01:12:29.252: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:12:29.469: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:12:29.469: PQ: Serial1/0 output (Pk size/Q 84/2) --More-- *Mar 1 01:12:34.889: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:12:34.889: PQ: Serial1/0 output (Pk size/Q 356/2) *Mar 1 01:12:34.889: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:12:34.889: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:12:34.934: PQ: Serial1/0 output (Pk size/Q 80/2) *Mar 1 01:12:34.934: PQ: Serial1/0 output (Pk size/Q 356/2) --More-- *Mar 1 01:12:39.253: PQ: Serial1/0 output (Pk size/Q 13/0) --More-- *Mar 1 01:12:49.253: PQ: Serial1/0 output (Pk size/Q 13/0) --More--   R7(config-subif)#frma  am class Prob *Mar 1 01:12:59.253: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:12:59.330: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:12:59.330: PQ: Serial1/0 output (Pk size/Q 84/2) R7(config-subif)#fram class Prob6b %Creating new map-class. R7(config-subif)# *Mar 1 01:13:03.220: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:13:03.220: PQ: Serial1/0 output (Pk size/Q 84/2) R7(config-subif)# *Mar 1 01:13:04.939: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:13:04.939: PQ: Serial1/0 output (Pk size/Q 80/2) R7(config-subif)# R7(config-subif)# R7(config-subif)# R7(config-subif)# *Mar 1 01:13:09.254: PQ: Serial1/0 output (Pk size/Q 13/0) R7(config-subif)#int s 1/0.2 R7(config-subif)#int s 1/0.2fram class Prob6bdo sh run | b 1/0fram class Prob6b  *Mar 1 01:13:19.254: PQ: Serial1/0 output (Pk size/Q 13/0) R7(config-subif)#fram class Prob6nfram class Prob6ofram class Prob6 fram class Prob6 R7(config-subif)#^Z R7# *Mar 1 01:13:24.122: %SYS-5-CONFIG_I: Configured from console by console R7# R7# R7#sh deb General network interfaces: Priority output queueing debugging is on R7# *Mar 1 01:13:29.255: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:13:29.279: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:13:29.279: PQ: Serial1/0 output (Pk size/Q 84/2) R7#sh debconfi t180.40.7.162 Trying 180.40.7.162 ... Open R2# *Mar 1 01:13:34.748: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:13:34.748: PQ: Serial1/0 output (Pk size/Q 48/2) *Mar 1 01:13:34.780: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:13:34.780: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:13:34.784: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:13:34.784: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:13:34.788: PQ: Serial1/0 output (Pk size/Q 56/2) *Mar 1 01:13:34.788: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:13:34.820: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:13:34.820: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 01:13:34.820: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:13:34.820: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:13:34.824: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 01:13:34.824: PQ: Serial1/0 output (Pk size/Q 53/2) *Mar 1 01:13:34.832: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:13:34.836: PQ: Serial1/0 output (Pk size/Q 47/2) *Mar 1 01:13:34.920: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:13:34.920: PQ: Serial1/0 output (Pk size/Q 356/2) *Mar 1 01:13:34.920: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:13:34.920: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:13:34.964: PQ: Serial1/0 output (Pk size/Q 80/2) *Mar 1 01:13:34.964: PQ: Serial1/0 output (Pk size/Q 356/2) *Mar 1 01:13:35.036: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:13:35.036: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:13:39.255: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:13:49.255: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:13:59.256: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:13:59.276: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:13:59.276: PQ: Serial1/0 output (Pk size/Q 84/2) *Mar 1 01:14:04.885: PQ: Serial1/0 dlci 703 -> normal *Mar 1 01:14:04.885: PQ: Serial1/0 output (Pk size/Q 80/2) *Mar 1 01:14:09.256: PQ: Serial1/0 output (Pk size/Q 13/0) *Mar 1 01:14:19.257: PQ: Serial1/0 output (Pk size/Q 13/0)q [Connection to 180.40.7.162 closed by foreign host] R7# *Mar 1 01:14:21.484: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:14:21.484: PQ: Serial1/0 output (Pk size/Q 45/2) *Mar 1 01:14:21.608: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:14:21.608: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 01:14:21.757: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:14:21.757: PQ: Serial1/0 output (Pk size/Q 46/2) *Mar 1 01:14:21.761: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:14:21.761: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:14:21.765: PQ: Serial1/0 dlci 702 -> normal *Mar 1 01:14:21.769: PQ: Serial1/0 output (Pk size/Q 44/2) *Mar 1 01:14:21.785: PQ: Serial1/0 dlci 702 -> normal R7#u *Mar 1 01:14:21.789: PQ: Serial1/0 output (Pk size/Q 44/2) R7#u all All possible debugging has been turned off R7#sh mls qos ^ % Invalid input detected at '^' marker. R7#sh mls qoss map ^ % Invalid input detected at '^' marker. R7# RACK15AS>5 [Resuming connection 5 to r5 ... ] 1d04 S5#sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 Dscp-dscp mutation map: Default DSCP Mutation Map: --More--   S5#xonfi t ^ % Invalid input detected at '^' marker. S5#confi t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#mls qos map ? cos-dscp Map COS to DSCP dscp-cos Map DSCP to COS dscp-mutation Configure dscp-mutation map dscp-switch-priority Map DSCP to switch priority ip-prec-dscp DSCP values for IP precedences 0-7 policed-dscp Map DSCP to policed DSCP S5(config)#mls qos map ip-prec-dscp ? <0-63> 8 dscp values separated by spaces S5(config)#mls qos map ip-prec-dscp                          int fa 0/7 S5(config-if)#mls qos ? cos Configure interface COS parameters dscp-mutation Apply DSCP-DSCP map to DSCP trusted port monitor Collect QoS statistics trust Configure trust state of interface S5(config-if)#mls qos         exit S5(config)#map   nl  mls qw  qos map ip S5(config)#mls qos map ip-prec-dscp ? <0-63> 8 dscp values separated by spaces S5(config)#mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 S5(config)#do     RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#clea pol int ? % Unrecognized command R3#clea pol int \         int cou R3#clea int cou   fa 0/0 ? R3#clea int fa 0/0 R3#sh pol int fa 90/0 0/ 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 784 packets, 345485 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: prec1 (match-all) 35 packets, 17288 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 800 packets, 73723 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#clea ? aaa Clear AAA values access-list Clear access list statistical information access-template Access-template adjacency Adjacent nodes alps Clear Alps appletalk Reset AppleTalk information arp-cache Clear the entire ARP cache backhaul-session-manager Backhaul Session Manager information bgp Clear BGP connections bridge Reset bridge forwarding cache bsc Clear counters in command bstun Clear counters displayed in show bstun call Call cdp Reset cdp information cef CEF information related to linecard clns CLNS cns CNS agents counters Clear counters on one or all interfaces crypto Encryption subsystem decnet Reset DECnet information dialer Clear dialer statistics dlsw Data Link Switching (DLSw) --More--   drip Clear drip dspfarm clear DSPFARM frame-relay Clear Frame Relay information funi FUNI information h323 Clear H.323 protocol related information host Delete host table entries interface Clear the hardware logic on an interface ip IP ipv6 IPv6 ipx Reset Novell/IPX information isis Clear IS-IS data structures kerberos Clear Kerberos Values lane lane line Reset a terminal line logging Clear logging buffer mac-address-table MAC forwarding table memory Memory counters mgcp clear Media Gateway Control Protocol mpls Reset MPLS statistical information mpoa MPOA clear commands mrcp Clear MRCP statistics ncia Native Client Interface Architecture (NCIA) netbios-cache Clear the entire NetBIOS name cache --More--   pagp Port channel information parser Clear parser data ppp Clear ppp statistics pppatm PPP over ATM pppoe PPP over Ethernet radius Clears radius server information rif-cache Clear the entire RIF cache route-map Clear Route Map statistical information rpms-proc Clear RPMS Process Information rudpv1 Clear Rudpv1 information saa SAA clear options sccp clear Skinny Client Control Protocol scp Clear SCP commands sip-ua Clear SIP User Agent Information snapshot Clear Snapshot timers source-bridge Clear counters displayed in "show source-bridge" ssg Clear a SSG entity sss Subscriber Service Switch Information statistics Statistics stun Clear counters displayed in show stun tag-switching Reset tag switching information tarp Reset tarp information tcp Clear a TCP connection or statistics --More--   R3#clea in ? Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Null Null interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-TokenRing Virtual TokenRing range Clear all interfaces within an inclusive range R3#clea in fa 0/0 ? R3#clea in fa 0/0                pol   ? % Unrecognized command R3#pol     confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#serv p      no serv out test R3(config-if)#no serv out testno serv out test  serv out test  R3(config-if)#^Z R3#shj *Mar 2 04:44:57.993: %SYS-5-CONFIG_I: Configured from console by console R3#shj pol ij pol i  pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 784 packets, 345485 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: prec1 (match-all) 35 packets, 17288 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 814 packets, 75055 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Service-policy output: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) --More--   R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 784 packets, 345485 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: prec1 (match-all) 35 packets, 17288 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 817 packets, 75349 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Service-policy output: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) --More--   Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps --More--   Match: ip precedence 1 Class-map: class-default (match-any) 4 packets, 316 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#int fa 0/0 serv out testn serv out testo serv out test serv out test R3(config-if)#no serv out test test  test  test i testn test R3(config-if)#no serv in testno serv in test  serv in test  R3(config-if)#^Z R3#confi tsh pol int fa 0/0 *Mar 2 04:45:48.583: %SYS-5-CONFIG_I: Configured from console by console R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 1 packets, 98 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# RACK15AS>5 [Resuming connection 5 to r5 ... ] S5(config)#do p 180.40.6. 7.   7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5(config)# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 5 packets, 490 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# RACK15AS>5 [Resuming connection 5 to r5 ... ] S5(config)#mls qos QoS: ensure flow-control on all interfaces are OFF for proper operation. S5(config)#do sh mls q S5(config)#do sh mls qos QoS is enabled S5(config)#do sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 14 16 28 32 40 48 56 Dscp-dscp mutation map: Default DSCP Mutation Map: --More--   S5(config)#qdo sh mls qos map mls qos do p 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5(config)# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 24 packets, 2432 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# RACK15AS>5 [Resuming connection 5 to r5 ... ] S5(config)#int fa 90  0/3 S5(config-if)#mls qos ? cos Configure interface COS parameters dscp-mutation Apply DSCP-DSCP map to DSCP trusted port monitor Collect QoS statistics trust Configure trust state of interface S5(config-if)#mls qos tr S5(config-if)#mls qos trust ? cos Classify by packet COS device trusted device class dscp Classify by packet DSCP ip-precedence Classify by packet IP precedence S5(config-if)#mls qos trust               int fa 0/3do p 180.40.7.129int fa 0/3  7 S5(config-if)#mls qos tru S5(config-if)#mls qos trust ? cos Classify by packet COS device trusted device class dscp Classify by packet DSCP ip-precedence Classify by packet IP precedence S5(config-if)#mls qos trust ip S5(config-if)#mls qos trust ip-precedence S5(config-if)#mls qos trust ip-precedence int fa 0/7 3do p 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5(config-if)# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 47 packets, 4862 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# RACK15AS>5 [Resuming connection 5 to r5 ... ] do p 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5(config-if)#do p 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5(config-if)#do p 180.40.7.129 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms S5(config-if)# RACK15AS>3 [Resuming connection 3 to r3 ... ] sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   --More--   Class-map: prec3 (match-all) --More--   5 packets, 570 bytes --More--   5 minute offered rate 0 bps --More--   Match: ip precedence 3 --More--   --More--   Class-map: prec1 (match-all) --More--   0 packets, 0 bytes --More--   5 minute offered rate 0 bps --More--   Match: ip precedence 1 --More--   Class-map: class-default (match-any) 69 packets, 7258 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3# RACK15AS>5 [Resuming connection 5 to r5 ... ] S5(config-if)#do p 180.40.7.129mls qos trust ip-precedence int fa 0/7 37mls qos trust ip-precedence do p 180.40.7.129 mls qos trust ip-precedence nmls qos trust ip-precedence omls qos trust ip-precedence  mls qos trust ip-precedence  S5(config-if)#exit S5(config)#no mls qos S5(config)#no mls   qosexit no mls qos trust ip-precedence do p 180.40.7.129 mls qos trust ip-precedence int fa 0/7 3do p 180.40.7.129sh mls qos map              do sh run | i mls mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 S5(config)#no mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 S5(config)#^Z S5# RACK15AS>6 [Resuming connection 6 to r6 ... ] 1 S6#conf t Enter configuration commands, one per line. End with CNTL/Z. S6(config)# S6(config)#mls qos QoS: ensure flow-control on all interfaces are OFF for proper operation. S6(config)#mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 S6(config)#int fa 0/1 S6(config-if)#mls qos tru ip S6(config-if)#mls qos tru ip-precedence S6(config-if)#^Z S6# RACK15AS>5 [Resuming connection 5 to r5 ... ] 1d S5#confi t p 180.40.7.129 re 10000000 Type escape sequence to abort. Sending 10000000, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 2251 packets, 255670 bytes 5 minute offered rate 2000 bps, drop rate 0 bps Match: any R3# RACK15AS>6 [Resuming connection 6 to r6 ... ] 1 S6#conf t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#mls qos tru ip-precedence int fa 0/1  7 S6(config-if)#int fa 0/7mls qos tru ip-precedence S6(config-if)#^Z S6# 1d04h: %SYS-5-CONFIG_I: Configured from console by console S6# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 3448 packets, 393072 bytes 5 minute offered rate 2000 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 9673 packets, 1101674 bytes 5 minute offered rate 33000 bps, drop rate 0 bps Match: any R3#i  RACK15AS>6 [Resuming connection 6 to r6 ... ] S6#conf ten conf t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#mls qos tru ip-precedence int fa 0/7  1 S6(config-if)#int fa 0/1mls qos tru ip-precedence nmls qos tru ip-precedence omls qos tru ip-precedence  mls qos tru ip-precedence  S6(config-if)#^Z S6# 1d04h: %SYS-5-CONFIG_I: Configured from console by console S6#sh run | b mls mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 no switchport ip address 20.10.2.1 255.255.255.0 ! interface FastEthernet0/2 --More--   no switchport ip address 20.10.1.2 255.255.255.0 ! interface FastEthernet0/3 switchport mode dynamic desirable ! interface FastEthernet0/4 switchport access vlan 10 switchport mode dynamic desirable ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport mode dynamic desirable ! interface FastEthernet0/7 switchport access vlan 10 switchport mode dynamic desirable mls qos trust ip-precedence ! interface FastEthernet0/8 switchport mode dynamic desirable --More--   S6# RACK15AS>5 [Resuming connection 5 to r5 ... ] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!. Success rate is 99 percent (144549/144550), round-trip min/avg/max = 1/2/56 ms S5# S5# S5# S5# S5#confit Translating "confit" % Unknown command or computer name, or unable to find computer address S5#confit    t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#mls qos QoS: ensure flow-control on all interfaces are OFF for proper operation. S5(config)# S5(config)# S5(config)# S5(config)#int fa 0/24 S5(config-if)#mls qos trun dscp S5(config-if)#mls qos trun dscp       dscp S5(config-if)#exit S5(config)#mls qo  s S5(config)#mls qos mu S5(config)#mls qos mu   dsc S5(config)#mls qosdsc    dsc S5(config)#mls qos dsc   map ? cos-dscp Map COS to DSCP dscp-cos Map DSCP to COS dscp-mutation Configure dscp-mutation map dscp-switch-priority Map DSCP to switch priority ip-prec-dscp DSCP values for IP precedences 0-7 policed-dscp Map DSCP to policed DSCP S5(config)#mls qos map dsc S5(config)#mls qos map dscp-m S5(config)#mls qos map dscp-mutation ? WORD DSCP mutation map name S5(config)#mls qos map dscp-mutation Prob9 ? <0-63> DSCP values separated by spaces (up to 8 values total) S5(config)#mls qos map dscp-mutation Prob9 28 ? <0-63> DSCP values separated by spaces (up to 8 values total) to Specify egress DSCPs S5(config)#mls qos map dscp-mutation Prob9 28 to 26 S5(config)#mls qos map dscp-mutation Prob9 28 to 26        14 to 12 S5(config)#do sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 00 00 00 00 00 00 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 02 02 02 02 02 02 02 02 4 : 02 02 02 02 02 02 02 02 03 03 5 : 03 03 03 03 03 03 03 03 03 03 6 : 03 03 03 03 Cos-dscp map: cos: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 IpPrecedence-dscp map: ipprec: 0 1 2 3 4 5 6 7 -------------------------------- dscp: 0 8 16 24 32 40 48 56 Dscp-dscp mutation map: Prob9: --More--   d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 12 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 26 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-dscp mutation map: Default DSCP Mutation Map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 S5(config)# S5(config)# S5(config)# S5(config)#int fa 90/24 ^ % Invalid input detected at '^' marker. S5(config)#int fa 90/240/24  S5(config-if)#mls qos ? cos Configure interface COS parameters dscp-mutation Apply DSCP-DSCP map to DSCP trusted port monitor Collect QoS statistics trust Configure trust state of interface S5(config-if)#mls qos s dsc S5(config-if)#mls qos dscp-mutation ? WORD dscp-mutation name S5(config-if)#mls qos dscp-mutation Prob9 ? S5(config-if)#mls qos dscp-mutation Prob9   S5(config-if)#^Z S5#confi t 1d05h: %SYS-5-CONFIG_I: Configured from console by console S5#confi tt p 180.40.7.129 re 10000000 Type escape sequence to abort. Sending 10000000, 100-byte ICMP Echos to 180.40.7.129, timeout is 2 seconds: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!! RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 1585 packets, 180690 bytes 5 minute offered rate 0 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 134973 packets, 15386922 bytes 5 minute offered rate 105000 bps Match: dscp af32 (28) --More--   R3#sh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 4669 packets, 532266 bytes 5 minute offered rate 13000 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 134973 packets, 15386922 bytes 5 minute offered rate 99000 bps Match: dscp af32 (28) --More--   Class-map: prec3 (match-all) 5 packets, 570 bytes 5 minute offered rate 0 bps Match: ip precedence 3 Class-map: prec1 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: ip precedence 1 Class-map: class-default (match-any) 9785 packets, 1112622 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any R3#qsh pol int fa 0/0 FastEthernet0/0 Service-policy input: test Class-map: dscp12 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af12 (12) Class-map: dscp14 (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps Match: dscp af13 (14) Class-map: dscp26 (match-all) 5989 packets, 682746 bytes 5 minute offered rate 13000 bps Match: dscp af31 (26) Class-map: dscp28 (match-all) 134973 packets, 15386922 bytes 5 minute offered rate 99000 bps Match: dscp af32 (28) --More--   R3# RACK15AS>5 [Resuming connection 5 to r5 ... ] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!. Success rate is 99 percent (20632/20633), round-trip min/avg/max = 1/2/52 ms S5#sh run | b mls mls qos map dscp-mutation Prob9 14 to 12 mls qos map dscp-mutation Prob9 28 to 26 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 switchport mode dynamic desirable ! interface FastEthernet0/2 --More--   switchport mode dynamic desirable ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable ! interface FastEthernet0/4 switchport mode dynamic desirable ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport mode dynamic desirable ! interface FastEthernet0/7 no switchport ip address 208.28.1.2 255.255.255.0 ! interface FastEthernet0/8 switchport mode dynamic desirable ! interface FastEthernet0/9 --More--   switchport mode dynamic desirable ! interface FastEthernet0/10 switchport mode dynamic desirable ! interface FastEthernet0/11 switchport mode dynamic desirable ! interface FastEthernet0/12 switchport mode dynamic desirable ! interface FastEthernet0/13 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/14 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/15 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! --More--  interface FastEthernet0/16 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/17 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/18 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/19 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/20 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/21 switchport mode dynamic desirable mls qos dscp-mutation Prob9 --More--  ! interface FastEthernet0/22 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/23 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk mls qos trust dscp mls qos dscp-mutation Prob9 ! interface GigabitEthernet0/1 switchport mode dynamic desirable ! interface GigabitEthernet0/2 switchport mode dynamic desirable ! interface Vlan1 no ip address --More--   shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ip http server ip http secure-server ! ! ! control-plane ! ! line con 0 exec-timeout 0 0 logging synchronous line vty 0 4 privilege level 15 no login line vty 5 15 no login --More--   S5# RACK15AS>6 [Resuming connection 6 to r6 ... ] S6#confi t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#int fa 0/4 S6(config-if)#mls qos ? cos Configure interface COS parameters dscp-mutation Apply DSCP-DSCP map to DSCP trusted port monitor Collect QoS statistics trust Configure trust state of interface S6(config-if)#mls qos cos ? <0-7> Class of service value between 0 and 7 override Force default COS on all packets S6(config-if)#mls qos cos 4 >? % Unrecognized command S6(config-if)#mls qos cos 4 > ? S6(config-if)#mls qos cos 4 S6(config-if)#end S6# RACK15AS>5 [Resuming connection 5 to r5 ... ] S5#sh run int s   fa 0/24 Building configuration... Current configuration : 144 bytes ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk mls qos trust dscp mls qos dscp-mutation Prob9 end S5#confi t Enter configuration commands, one per line. End with CNTL/Z. S5(config)#int fa 0/24 S5(config-if)#mls qos tri  S5(config-if)#mls qos trust ? cos Classify by packet COS device trusted device class dscp Classify by packet DSCP ip-precedence Classify by packet IP precedence S5(config-if)#mls qos trust dscp ? pass-through dscp pass-through mode S5(config-if)#mls qos trust dscp p S5(config-if)#mls qos trust dscp pass-through ? cos transmit without cos modification S5(config-if)#mls qos trust dscp pass-through co S5(config-if)#mls qos trust dscp pass-through cos                       cos pas S5(config-if)#mls qos trust cos pass-through dsc S5(config-if)#mls qos trust cos pass-through dscp ? S5(config-if)#mls qos trust cos pass-through dscp S5(config-if)#do sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   S5(config-if)#exit S5(config)#mls qos map dsc S5(config)#mls qos map dscp-c S5(config)#mls qos map dscp-cos ? <0-63> DSCP values separated by spaces (up to 8 values total) S5(config)#mls qos map dscp-cos 8 9 10 11 14 3 14 15 to 2 S5(config)#mls qos map dscp-cos 8 9 10 11 13 14 15 to 2                       24 25 27 28 29 30 31 % Incomplete command. S5(config)#mls qos map dscp-cos 24 25 27 28 29 30 31 to 2 S5(config)#do sh mls qos map dscp-do  cos Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 02 02 1 : 02 02 01 02 02 02 02 02 02 02 2 : 02 02 02 02 02 02 03 02 02 02 3 : 02 02 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 S5(config)#int fa 0/3 S5(config-if)#wrr S5(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id min-reserve Configure min-reserve level S5(config-if)#wrr-queue cos S5(config-if)#wrr-queue cos-map ? <1-4> enter cos-map queue id S5(config-if)#wrr-queue cos-map 3 ? <0-7> CoS values separated by spaces (up to 8 values total) S5(config-if)#wrr-queue cos-map 3 0 2 6 7 S5(config-if)#wrr-queue cos-map 3 0 2 6 7         4 4 S5(config-if)#do sh mls qos int fa 0/3 qu FastEthernet0/3 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 Cos-queue map: cos-qid 0 - 3 1 - 1 2 - 3 3 - 2 4 - 4 5 - 3 6 - 3 7 - 3 S5(config-if)#qw  pri S5(config-if)#priority-queue ou S5(config-if)#priority-queue out S5(config-if)#priority-queue out do sh mls qos int fa 0/3 qu FastEthernet0/3 Egress expedite queue: ena wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 when expedite queue is disabled Cos-queue map: cos-qid 0 - 3 1 - 1 2 - 3 3 - 2 4 - 4 5 - 3 6 - 3 7 - 3 S5(config-if)#wr S5(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id min-reserve Configure min-reserve level S5(config-if)#wrr-queue ba S5(config-if)#wrr-queue bandwidth ? <1-65536> enter bandwidth weight for qid 1 S5(config-if)#wrr-queue bandwidth 30 ? <1-65536> enter bandwidth weight for qid 2 S5(config-if)#wrr-queue bandwidth 30 30 40 ? <1-65536> enter bandwidth weight for qid 4 S5(config-if)#wrr-queue bandwidth 30 30 40 1 S5(config-if)#^Z S5#sh e 1d05h: %SYS-5-CONFIG_I: Configured from console by console S5#sh e un r  run | b mls mls qos map dscp-mutation Prob9 14 to 12 mls qos map dscp-mutation Prob9 28 to 26 mls qos map dscp-cos 8 9 10 11 13 14 15 24 to 2 mls qos map dscp-cos 25 27 28 29 30 31 to 2 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 switchport mode dynamic desirable --More--  ! interface FastEthernet0/2 switchport mode dynamic desirable ! interface FastEthernet0/3 switchport access vlan 10 switchport mode dynamic desirable wrr-queue bandwidth 30 30 40 1 wrr-queue cos-map 1 1 wrr-queue cos-map 2 3 wrr-queue cos-map 3 0 2 5 6 7 wrr-queue cos-map 4 4 priority-queue out ! interface FastEthernet0/4 switchport mode dynamic desirable ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport mode dynamic desirable ! --More--  interface FastEthernet0/7 no switchport ip address 208.28.1.2 255.255.255.0 ! interface FastEthernet0/8 switchport mode dynamic desirable ! interface FastEthernet0/9 switchport mode dynamic desirable ! interface FastEthernet0/10 switchport mode dynamic desirable ! interface FastEthernet0/11 switchport mode dynamic desirable ! interface FastEthernet0/12 switchport mode dynamic desirable ! interface FastEthernet0/13 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! --More--  interface FastEthernet0/14 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/15 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/16 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/17 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/18 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/19 switchport mode dynamic desirable mls qos dscp-mutation Prob9 --More--  ! interface FastEthernet0/20 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/21 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/22 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/23 switchport mode dynamic desirable mls qos dscp-mutation Prob9 ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk mls qos trust cos pass-through dscp mls qos dscp-mutation Prob9 ! --More-- RACK15AS>6 [Resuming connection 6 to r6 ... ] 1 S6#sh run int fa 0/4 Building configuration... Current configuration : 110 bytes ! interface FastEthernet0/4 switchport access vlan 10 switchport mode dynamic desirable mls qos cos 4 end S6# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#sh run int s 1/2 Building configuration... Current configuration : 124 bytes ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 max-reserved-bandwidth 100 service-policy output FromR3 end R3#sh run | b pol policy-map test class dscp12 class dscp14 class dscp26 class dscp28 class prec3 class prec1 policy-map FromR3 class ftp bandwidth percent 51 class telnet bandwidth percent 24 class class-default bandwidth percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 --More--   R3#q sh run | b class class-map match-all dscp26 match dscp af31 class-map match-all dscp14 match dscp af13 class-map match-all telnet match protocol telnet class-map match-all dscp12 match dscp af12 class-map match-all dscp28 match dscp af32 class-map match-all prec1 match ip precedence 1 class-map match-all prec3 match ip precedence 3 class-map match-all ftp match protocol ftp ! ! policy-map test class dscp12 class dscp14 class dscp26 class dscp28 --More--   class prec3 class prec1 policy-map FromR3 class ftp bandwidth percent 51 class telnet bandwidth percent 24 class class-default bandwidth percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto service-policy input test ! interface BRI0/0 --More--   R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#no policy-map FromR3 R3(config)#policy-map FromR3 R3(config-pmap)#class dscp12 R3(config-pmap-c)#pri R3(config-pmap-c)#priority ? <8-2000000> Kilo Bits per second percent % of total bandwidth R3(config-pmap-c)#priority p R3(config-pmap-c)#priority percent 25 ? <32-2000000> Burst in bytes R3(config-pmap-c)#priority percent 25 R3(config-pmap-c)# class ftp R3(config-pmap-c)#ban ? <8-2000000> Kilo Bits per second percent % of total Bandwidth remaining % of the remaining bandwidth R3(config-pmap-c)#ban re ? percent % of the remaining bandwidth R3(config-pmap-c)#ban re p R3(config-pmap-c)#ban re percent 51 R3(config-pmap-c)#ban re percent 51 R3(config-pmap-c)#eixt ^ % Invalid input detected at '^' marker. R3(config-pmap-c)#ei xit R3(config-pmap)#class telnet R3(config-pmap-c)#ban re p 24 R3(config-pmap-c)#exit R3(config-pmap)#clas class-deafult % class map class-deafult not configured R3(config-pmap)#clas class-deafultult ult fultault R3(config-pmap-c)#ba R3(config-pmap-c)#bandwidth r R3(config-pmap-c)#bandwidth remaining p R3(config-pmap-c)#bandwidth remaining percent 25 R3(config-pmap-c)#^Z R3# *Mar 2 05:28:03.415: %SYS-5-CONFIG_I: Configured from console by console R3#sh run int s 1/2 Building configuration... Current configuration : 94 bytes ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 max-reserved-bandwidth 100 end R3#cofnit     onf t Enter configuration commands, one per line. End with CNTL/Z. R3(config)# R3(config)#o int fa    s 1/2 R3(config-if)#ser R3(config-if)#serou FromR3 ^ % Invalid input detected at '^' marker. R3(config-if)#serou FromR3 ou FromR3 R3(config-if)#^Z R3# *Mar 2 05:28:35.740: %SYS-5-CONFIG_I: Configured from console by console R3#sh run | b class class-map match-all dscp26 match dscp af31 class-map match-all dscp14 match dscp af13 class-map match-all telnet match protocol telnet class-map match-all dscp12 match dscp af12 class-map match-all dscp28 match dscp af32 class-map match-all prec1 match ip precedence 1 class-map match-all prec3 match ip precedence 3 class-map match-all ftp match protocol ftp ! ! policy-map test class dscp12 class dscp14 class dscp26 class dscp28 --More--   class prec3 class prec1 policy-map FromR3 class dscp12 priority percent 25 class ftp bandwidth remaining percent 51 class telnet bandwidth remaining percent 24 class class-default bandwidth remaining percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto service-policy input test --More--   R3#sh run int s 1/2 Building configuration... Current configuration : 124 bytes ! interface Serial1/2 ip address 180.40.7.1 255.255.255.224 max-reserved-bandwidth 100 service-policy output FromR3 end R3# R3#sh tra R3#sh tra? track traffic-shape translate translation-rule R3#sh track ? <1-500> Track number brief Brief output interface Interface objects ip IP objects resolution Resolution of tracked parameters timers Polling interval timers | Output modifiers R3#sh track          confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip nat ? Stateful Stateful NAT configuration commands inside Inside address translation log NAT Logging outside Outside address translation pool Define pool of addresses service Special translation for application using non-standard port translation NAT translation entry configuration R3(config)#ip nat st ? id Specify Stateful NAT ID unique per router R3(config)#ip nat st id ? <1-2147483647> Stateful NAT id number R3(config)#ip nat st id 1 ? R3(config)#ip nat st id 1 R3(config-ipnat-snat)#? IP Stateful NAT configuration commands: backup Configure backup's ip address exit Exit from IP Stateful NAT primary mode no Negate or set default values of a command primary Configure primary's ip address redundancy Define redundancy group name R3(config-ipnat-snat)#red R3(config-ipnat-snat)#redundancy ? WORD redundancy groupname R3(config-ipnat-snat)#redundancy test ? R3(config-ipnat-snat)#redundancy test R3(config-ipnat-snat-red)#? IP Stateful NAT Redundancy mode configuration commands: exit Exit from IP Stateful NAT Redundancy config mode mapping-id Configure mapping-id for this redundancy group no Negate or set default values of a command R3(config-ipnat-snat-red)#redundancy test                 map R3(config-ipnat-snat-red)#mapping-id ? <1-2147483647> mapping-id number R3(config-ipnat-snat-red)#mapping-id 10 ? R3(config-ipnat-snat-red)#mapping-id 10 R3(config-ipnat-snat-red)#exit R3(config)#> ? Configure commands: aaa Authentication, Authorization and Accounting. aal2-profile Configure AAL2 profile access-list Add an access list entry alarm-interface Configure a specific Alarm Interface Card alias Create command alias alps Configure Airline Protocol Support appletalk Appletalk global configuration commands arap Appletalk Remote Access Protocol arp Set a static ARP entry async-bootp Modify system bootp parameters atm Enable ATM SLM Statistics backhaul-session-manager Configure Backhaul Session Manager banner Define a login banner bba-group Configure BBA Group boot Modify system boot parameters bridge Bridge Group. bstun BSTUN global configuration commands buffers Adjust system buffer pool parameters busy-message Display message when connection to host fails call Configure Call parameters call-history-mib Define call history mib parameters --More--   R3(config)#ip nat ? Stateful Stateful NAT configuration commands inside Inside address translation log NAT Logging outside Outside address translation pool Define pool of addresses service Special translation for application using non-standard port translation NAT translation entry configuration R3(config)#ip nat stat ? id Specify Stateful NAT ID unique per router R3(config)#ip nat stat id 1 ? R3(config)#ip nat stat id 1 R3(config-ipnat-snat)#? IP Stateful NAT configuration commands: backup Configure backup's ip address exit Exit from IP Stateful NAT primary mode no Negate or set default values of a command primary Configure primary's ip address redundancy Define redundancy group name R3(config-ipnat-snat)#prei  i R3(config-ipnat-snat)#primary ? A.B.C.D Primary IP address R3(config-ipnat-snat)#primary         exit R3(config)#exitip nat stat id 1   2 % SNAT with id : 1 already running. Please remove and reconfigure% R3(config)#ip nat stat id 2exit ip nat stat id 1 R3(config-ipnat-snat)#pri R3(config-ipnat-snat)#primary > 1.1.1.1 R3(config-ipnat-snat-pri)#? IP Stateful NAT Primary mode configuration commands: exit Exit from IP Stateful NAT Primary Config mode mapping-id Configure mapping-id for this mapping no Negate or set default values of a command peer Configure peer's ip address R3(config-ipnat-snat-pri)#ma  exit R3(config)#exitprimary 1.1.1.1ip nat stat id 1 R3(config-ipnat-snat)#ip nat stat id 1 exit primary 1.1.1.1 R3(config-ipnat-snat-pri)#? IP Stateful NAT Primary mode configuration commands: exit Exit from IP Stateful NAT Primary Config mode mapping-id Configure mapping-id for this mapping no Negate or set default values of a command peer Configure peer's ip address R3(config-ipnat-snat-pri)#peer ? A.B.C.D Peer IP address R3(config-ipnat-snat-pri)#peer 2.2.2.2 R3(config-ipnat-snat-pri)#? IP Stateful NAT Primary mode configuration commands: exit Exit from IP Stateful NAT Primary Config mode mapping-id Configure mapping-id for this mapping no Negate or set default values of a command peer Configure peer's ip address R3(config-ipnat-snat-pri)#ma R3(config-ipnat-snat-pri)#mapping-id ? <1-2147483647> mapping-id number R3(config-ipnat-snat-pri)#mapping-id 10 R3(config-ipnat-snat-pri)#int fa 0/1 R3(config-if)#int fa 0/1          sta   R3(config-if)#standby ? <0-255> group number authentication Authentication delay HSRP initialisation delay ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level redirects Configure sending of ICMP Redirect messages with an HSRP virtual IP address as the gateway IP address timers Hello and hold timers track Priority tracking use-bia HSRP uses interface's burned in address R3(config-if)#standby name > ? WORD name string R3(config-if)#standby name              mapping-id 10peer 2.2.2.2 mapping-id 10int fa 0/1           stand name test ? R3(config-if)#stand name test R3(config-if)#stamd R3(config-if)#stamd     stand name test int fa 0/1 stand name test nstand name test ostand name test  stand name test  R3(config-if)#exit R3(config)#do sh run | b nat ip nat Stateful id 1 primary 1.1.1.1 peer 2.2.2.2 mapping-id 10 redundancy test mapping-id 10 ip classless ! no ip http server no ip http secure-server ! ip access-list extended Prob1a permit icmp host 100.1.1.1 host 20.10.1.2 echo ip access-list extended Prob1b permit icmp host 100.1.1.1 host 20.10.1.1 echo ip access-list extended Prob1c permit icmp host 100.1.1.1 20.10.1.0 0.0.0.255 echo ! ! route-map Prob1 permit 10 match ip address Prob1c match length 1001 2147483647 set interface Serial1/2 --More--   R3(config)#no ip nat Stateful id 1 R3(config)#int     ip nat ? Stateful Stateful NAT configuration commands inside Inside address translation log NAT Logging outside Outside address translation pool Define pool of addresses service Special translation for application using non-standard port translation NAT translation entry configuration R3(config)#ip nat sou li s  st ? % Unrecognized command R3(config)#ip nat sou list            in sou list 100     ? interface Specify interface for global address pool Name pool of global addresses R3(config)#ip nat in sou list 1 poo test ? mapping-id Associate a mapping id to this mapping overload Overload an address translation vrf Specify vrf R3(config)#ip nat in sou list 1 poo test map R3(config)#ip nat in sou list 1 poo test mapping-id                                          int fa 0/1 0 R3(config-if)#st R3(config-if)#standby ? <0-255> group number authentication Authentication delay HSRP initialisation delay ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level redirects Configure sending of ICMP Redirect messages with an HSRP virtual IP address as the gateway IP address timers Hello and hold timers track Priority tracking use-bia HSRP uses interface's burned in address R3(config-if)#standby 47 ip 180.30  40..1327.132 R3(config-if)# *Mar 2 08:22:21.599: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active R3(config-if)#do sh arp Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.131 67 0013.7f12.a521 ARPA FastEthernet0/0 Internet 180.40.7.130 28 00d0.bbe3.86c0 ARPA FastEthernet0/0 Internet 180.40.7.129 - 0013.7f15.f240 ARPA FastEthernet0/0 Internet 180.40.7.132 - 0000.0c07.ac2f ARPA FastEthernet0/0 R3(config-if)#do sh arpstandby 47 ip 180.40.7.132               pri R3(config-if)#standby 47 priority 120 R3(config-if)#standby 47 priority 120           re R3(config-if)#standby 47 preempt R3(config-if)#standby 47 preempt         tr R3(config-if)#standby 47 track int s 1/2 ^ % Invalid input detected at '^' marker. R3(config-if)#standby 47 track int s 1/2 s 1/2  s 1/2  s 1/2  s 1/2 ? <1-255> Decrement value R3(config-if)#standby 47 track s 1/2 25 R3(config-if)#standby 47 track s 1/2 25 25 0 25 R3(config-if)#stnady     R3(config-if)#standby   y 47 track s 1/0 25               ? authentication Authentication ip Enable HSRP and set the virtual IP address mac-address Virtual MAC address name Redundancy name string preempt Overthrow lower priority Active routers priority Priority level timers Hello and hold timers track Priority tracking R3(config-if)#standby 47 name hsrp R3(config-if)# RACK15AS>7 [Resuming connection 7 to r7 ... ] R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/1 R7(config-if)#stan R7(config-if)#standby 47 ip 18-0  0.40.7.132 R7(config-if)#^Z R7#sh *Mar 1 05:12:09.954: %SYS-5-CONFIG_I: Configured from console by console R7#sh staand   nd brie P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/1 47 100 Speak 180.40.7.129 unknown 180.40.7.132 R7#sh stand brie P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/1 47 100 Standby 180.40.7.129 local 180.40.7.132 R7#sh stand brie confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/1 R7(config-if)#int fa 0/1standby 47 ip 180.40.7.132\                  per R7(config-if)#standby 47 per  re R7(config-if)#standby 47 preempt R7(config-if)#^Z R7# *Mar 1 05:13:22.357: %SYS-5-CONFIG_I: Configured from console by console R7# R7# R7# R7# R7# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3(config-if)#^Z R3#sh *Mar 2 08:29:25.994: %SYS-5-CONFIG_I: Configured from console by console R3#sh run int s fa 0/0 Building configuration... Current configuration : 310 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto standby 47 ip 180.40.7.132 standby 47 priority 120 standby 47 preempt standby 47 name hsrp standby 47 track Serial1/2 25 standby 47 track Serial1/0 25 service-policy input test end R3# RACK15AS>7 [Resuming connection 7 to r7 ... ] R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)# R7(config)#^Z R7#sh *Mar 1 05:16:42.713: %SYS-5-CONFIG_I: Configured from console by console R7#sh run int fa 0/1 Building configuration... Current configuration : 176 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 speed auto half-duplex standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7# R7# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#tra R3(config)#trav c R3(config)#track ? <1-500> Tracked object resolution Tracking resolution parameters timer Polling interval timers R3(config)#track 1 ? interface Select an interface to track ip IP protocol R3(config)#track 1 ip ? route IP route R3(config)#track 1 ip rout ? A.B.C.D {/nn || A.B.C.D} Prefix and mask R3(config)#track 1 ip rout 20.10.2.0/24 ? metric Route metric reachability Route reachability state R3(config)#track 1 ip rout 20.10.2.0/24 rea R3(config)#track 1 ip rout 20.10.2.0/24 reachability ? R3(config)#track 1 ip rout 20.10.2.0/24 reachability % Cannot change object created via HSRP R3(config)#track 1 ip rout 20.10.2.0/24 reachability  1 ip rout 20.10.2.0/24 reachability 2 ip rout 20.10.2.0/24 reachability  % Cannot change object created via HSRP R3(config)#track 2 ip rout 20.10.2.0/24 reachability  ip rout 20.10.2.0/24 reachability 3 ip rout 20.10.2.0/24 reachability  R3(config-track)#do sh track Track 1 (via HSRP) Interface Serial1/2 line-protocol Line protocol is Up 1 change, last change 00:10:15 Tracked by: HSRP FastEthernet0/0 47 Track 2 (via HSRP) Interface Serial1/0 line-protocol Line protocol is Up 1 change, last change 00:10:10 Tracked by: HSRP FastEthernet0/0 47 Track 3 IP route 20.10.2.0 255.255.255.0 reachability Reachability is Up (OSPF) 1 change, last change 00:00:05 First-hop interface is Serial1/2 R3(config-track)#int fa 0/0 R3(config-if)#stan 47 tra R3(config-if)#stan 47 track ? <1-500> Tracked object number Async Async interface BRI ISDN Basic Rate Interface BVI Bridge-Group Virtual Interface CTunnel CTunnel interface Dialer Dialer interface FastEthernet FastEthernet IEEE 802.3 Loopback Loopback interface MFR Multilink Frame Relay bundle interface Multilink Multilink-group interface Port-channel Ethernet Channel of interfaces Serial Serial Tunnel Tunnel interface Vif PGM Multicast Host interface Virtual-TokenRing Virtual TokenRing R3(config-if)#stan 47 track 3 ? decrement Priority decrement R3(config-if)#stan 47 track 3 dec R3(config-if)#stan 47 track 3 decrement 30 R3(config-if)#^Z R3# *Mar 2 08:36:15.129: %SYS-5-CONFIG_I: Configured from console by console R3# R3# R3# R3#sh run | b tra ack track 3 ip route 20.10.2.0 255.255.255.0 reachability ! ! ! class-map match-all dscp26 match dscp af31 class-map match-all dscp14 match dscp af13 class-map match-all telnet match protocol telnet class-map match-all dscp12 match dscp af12 class-map match-all dscp28 match dscp af32 class-map match-all prec1 match ip precedence 1 class-map match-all prec3 match ip precedence 3 class-map match-all ftp match protocol ftp ! ! policy-map test --More--   class dscp12 --More--   class dscp14 class dscp26 class dscp28 class prec3 class prec1 policy-map FromR3 class dscp12 priority percent 25 class ftp bandwidth remaining percent 51 class telnet bandwidth remaining percent 24 class class-default bandwidth remaining percent 25 ! ! ! ! ! ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 --More--   duplex auto speed auto standby 47 ip 180.40.7.132 standby 47 priority 120 standby 47 preempt standby 47 name hsrp standby 47 track Serial1/2 25 standby 47 track Serial1/0 25 standby 47 track 3 decrement 30 service-policy input test ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0 ip address 180.40.7.66 255.255.255.224 --More--   R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#vrr R3(config-if)#vrrp ? <1-255> Group number R3(config-if)#vrrp 47 ? authentication Authentication string description Group specific description ip Enable Virtual Router Redundancy Protocol (VRRP) for IP preempt Enable preemption of lower priority Master priority Priority of this VRRP group timers Set the VRRP timers R3(config-if)#vrrp 47 ip 180.40.7.133 R3(config-if)# *Mar 2 08:40:43.813: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup R3(config-if)# *Mar 2 08:40:47.423: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Master R3(config-if)#pin   vrrp 47 ip 180.40.7.133               pri 120 R3(config-if)#^Z R3# *Mar 2 08:41:26.275: %SYS-5-CONFIG_I: Configured from console by console R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#vrrp 47 pri 120ip 180.40.7.133int fa 0/0  R3(config-if)#int fa 0/0vrrp 47 pri 120       aut R3(config-if)#vrrp 47 authentication ? text TEXT authentication R3(config-if)#vrrp 47 authentication test                           end R3# RACK15AS>7 [Resuming connection 7 to r7 ... ] R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#rotuer        int fa 0/1 R7(config-if)#vrrp 47 ip 180.40.7.133 R7(config-if)#^Z R7# *Mar 1 05:27:41.778: %VRRP-6-STATECHANGE: Fa0/1 Grp 47 state Init -> Backup R7# *Mar 1 05:27:43.032: %SYS-5-CONFIG_I: Configured from console by console R7# R7# R7# R7#h sh vv rrp brie Interface Grp Pri Time Own Pre State Master addr Group addr Fa0/1 47 100 3609 Y Backup 180.40.7.129 180.40.7.133 R7# R7# R7# R7#shg  arp Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.131 - 0013.7f12.a521 ARPA FastEthernet0/1 Internet 180.40.7.130 87 00d0.bbe3.86c0 ARPA FastEthernet0/1 Internet 180.40.7.129 87 0013.7f15.f240 ARPA FastEthernet0/1 Internet 208.28.1.1 - 0013.7f12.a520 ARPA FastEthernet0/0 Internet 208.28.1.2 88 0013.80cf.cd00 ARPA FastEthernet0/0 R7#47 RACK15AS>3 [Resuming connection 3 to r3 ... ] *M R3#sh arp Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.131 87 0013.7f12.a521 ARPA FastEthernet0/0 Internet 180.40.7.130 49 00d0.bbe3.86c0 ARPA FastEthernet0/0 Internet 180.40.7.129 - 0013.7f15.f240 ARPA FastEthernet0/0 Internet 180.40.7.133 - 0000.5e00.012f ARPA FastEthernet0/0 Internet 180.40.7.132 - 0000.0c07.ac2f ARPA FastEthernet0/0 R3#sh run in  t             RACK15AS>4 [Resuming connection 4 to r4 ... ] R4#ping 180.40.7.132 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.132, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms R4#ping 180.40.7.1322 3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.133, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms R4#sh arp Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.131 89 0013.7f12.a521 ARPA FastEthernet0/0 Internet 180.40.7.130 - 00d0.bbe3.86c0 ARPA FastEthernet0/0 Internet 180.40.7.129 50 0013.7f15.f240 ARPA FastEthernet0/0 R4# R4# R4# R4#confi t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#do sh run | b local ip local policy route-map Prob2 no ip http server no ip http secure-server ip classless ! ! ! ip access-list extended Prob2 permit icmp any any echo ! route-map Prob2 permit 10 match ip address Prob2 set ip next-hop 180.40.7.129 ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 --More--   R4(config)#no ip local policy route-map Prob2 R4(config)#^Z R4#confi tsh arp  *Mar 2 08:46:54.203: %SYS-5-CONFIG_I: Configured from console by console R4#sh arpping 180.40.7.133 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.133, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 1/3/4 ms R4#ping 180.40.7.133confi t sh arp ping 180.40.7.133 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.133, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms R4#ping 180.40.7.133confi t sh arp confi tping 180.40.7.133 2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.132, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 1/1/4 ms R4#sh arp Protocol Address Age (min) Hardware Addr Type Interface Internet 180.40.7.131 90 0013.7f12.a521 ARPA FastEthernet0/0 Internet 180.40.7.130 - 00d0.bbe3.86c0 ARPA FastEthernet0/0 Internet 180.40.7.129 51 0013.7f15.f240 ARPA FastEthernet0/0 Internet 180.40.7.133 0 0000.5e00.012f ARPA FastEthernet0/0 Internet 180.40.7.132 0 0000.0c07.ac2f ARPA FastEthernet0/0 R4# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#sh run int fa 0/0 Building configuration... Current configuration : 390 bytes ! interface FastEthernet0/0 ip address 180.40.7.129 255.255.255.224 ip policy route-map Prob1 duplex auto speed auto vrrp 47 ip 180.40.7.133 vrrp 47 priority 120 standby 47 ip 180.40.7.132 standby 47 priority 120 standby 47 preempt standby 47 name hsrp standby 47 track Serial1/2 25 standby 47 track Serial1/0 25 standby 47 track 3 decrement 30 service-policy input test end R3# RACK15AS>7 [Resuming connection 7 to r7 ... ] Trying 47... % Destination unreachable; gateway or host down % Unknown command or computer name, or unable to find computer address R7#sh run int fa 0/1 Building configuration... Current configuration : 201 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 speed auto half-duplex vrrp 47 ip 180.40.7.133 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)# R3(config)#ip dhcp ? aaa Configure aaa attributes binding DHCP address bindings bootp BOOTP specific configuration conflict DHCP address conflict parameters database Configure DHCP database agents excluded-address Prevent DHCP from assigning certain addresses limited-broadcast-address Use all 1's broadcast address ping Specify ping parameters used by DHCP pool Configure DHCP address pools relay DHCP relay agent parameters smart-relay Enable Smart Relay feature R3(config)#ip dhcp pool ? WORD Pool name R3(config)#ip dhcp pool Prob15 R3(dhcp-config)#net R3(dhcp-config)#netw R3(dhcp-config)#network 180.40.7.128 /27 R3(dhcp-config)#rout R3(dhcp-config)#rout    def R3(dhcp-config)#default-router ? Hostname or A.B.C.D Router's name or IP address R3(dhcp-config)#default-router 180.40.7.132 ? Hostname or A.B.C.D Router's name or IP address R3(dhcp-config)#default-router 180.40.7.132 180.40.7.133 180.40.7.134 R3(dhcp-config)#dom R3(dhcp-config)#domain-name ? WORD Domain name R3(dhcp-config)#domain-name cciestudent.com R3(dhcp-config)#dns R3(dhcp-config)#dns-server ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#dns-server 208.28.1.82 R3(dhcp-config)#tftp ? % Unrecognized command R3(dhcp-config)#tftp      opt R3(dhcp-config)#option ? <0-254> DHCP option code R3(dhcp-config)#option 150 ? ascii Data is an NVT ASCII string hex Data is a hexadecimal string instance Specify the option instance ip Data is one or more IP addresses R3(dhcp-config)#option 150 ip ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#option 150 ip 20.20.20.20 R3(dhcp-config)# RACK15AS>4 [Resuming connection 4 to r4 ... ] R4#deb dhcp ev ^ % Invalid input detected at '^' marker. R4#deb dhcp ev  ? detail DHCP packet content R4#deb dhcp de DHCP client activity debugging is on (detailed) R4#confi t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#int fa 0/0 R4(config-if)#do sh       ip add dhcp R4(config-if)# *Mar 2 08:51:32.535: DHCP: DHCP client process started: 10 *Mar 2 08:51:32.539: RAC: Starting DHCP discover on FastEthernet0/0 *Mar 2 08:51:32.539: DHCP: Try 1 to acquire address for FastEthernet0/0 R4(config-if)# *Mar 2 08:51:32.543: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 08:51:32.543: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from EXSTART to DOWN, Neighbor Down: Interface down or detached R4(config-if)# *Mar 2 08:51:35.791: DHCP: Shutting down from get_netinfo() *Mar 2 08:51:35.791: DHCP: Attempting to shutdown DHCP Client R4(config-if)# *Mar 2 08:51:37.571: DHCP: allocate request *Mar 2 08:51:37.571: DHCP: new entry. add to queue *Mar 2 08:51:37.571: DHCP: SDiscover attempt # 1 for entry: *Mar 2 08:51:37.571: Temp IP addr: 0.0.0.0 for peer on Interface: FastEthernet0/0 *Mar 2 08:51:37.571: Temp sub net mask: 0.0.0.0 *Mar 2 08:51:37.571: DHCP Lease server: 0.0.0.0, state: 1 Selecting *Mar 2 08:51:37.571: DHCP transaction id: 70D20B1 *Mar 2 08:51:37.571: Lease: 0 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 08:51:37.571: Next timer fires after: 00:00:03 *Mar 2 08:51:37.571: Retry count: 1 Client-ID: cisco-00d0.bbe3.86c0-Fa0/0 *Mar 2 08:51:37.575: Hostname: R4 R4(config-if)# *Mar 2 08:51:37.575: DHCP: SDiscover: sending 294 byte length DHCP packet *Mar 2 08:51:37.575: DHCP: SDiscover 294 bytes *Mar 2 08:51:37.575: B'cast on FastEthernet0/0 interface from 0.0.0.0 R4(config-if)# *Mar 2 08:51:39.583: DHCP: Received a BOOTREP pkt *Mar 2 08:51:39.583: DHCP: Scan: Message type: DHCP Offer *Mar 2 08:51:39.583: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 08:51:39.583: DHCP: Scan: Lease Time: 86400 *Mar 2 08:51:39.583: DHCP: Scan: Renewal time: 43200 *Mar 2 08:51:39.583: DHCP: Scan: Rebind time: 75600 *Mar 2 08:51:39.583: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 08:51:39.583: DHCP: Scan: Router Option: 180.40.7.132, 180.40.7.133, &180.40.7.134& *Mar 2 08:51:39.583: DHCP: Scan: Domain Name: cciestudent.com *Mar 2 08:51:39.583: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 08:51:39.587: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 08:51:39.587: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 08:51:39.587: UDP sport: 43, dport: 44, length: 325 *Mar 2 08:51:39.587: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 08:51:39.587: DHCP server identifie R4(config-if)#r: 180.40.7.129 *Mar 2 08:51:39.587: xid: 70D20B1, secs: 0, flags: 8000 *Mar 2 08:51:39.587: client: 0.0.0.0, your: 180.40.7.130 *Mar 2 08:51:39.587: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 08:51:39.587: options block length: 77 *Mar 2 08:51:39.587: DHCP Offer Message Offered Address: 180.40.7.130 *Mar 2 08:51:39.587: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 08:51:39.591: DHCP: Server ID Option: 180.40.7.129 *Mar 2 08:51:39.591: DHCP: offer received from 180.40.7.129 *Mar 2 08:51:39.591: DHCP: SRequest attempt # 1 for entry: *Mar 2 08:51:39.591: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/0 *Mar 2 08:51:39.591: Temp sub net mask: 255.255.255.224 *Mar 2 08:51:39.591: DHCP Lease server: 180.40.7.129, state: 2 Requesting *Mar 2 08:51:39.591: DHCP transaction id: 70D20B1 *Mar 2 08:51:39.591: Lease: 86400 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 08:51:39.591: Next timer fires after: 00:00:02 *Mar 2 08:51:39.591: Retry count: 1 Client-ID: cisco-00d0.bbe3.86c0-Fa0/0 *Mar 2 08:51:39.595: Hostname: R4 *Mar 2 08:51:39.595: DHCP: SRequest- Server ID option: 180.40.7.129 *Mar 2 08:51:39.595: DHCP: SRequest- Requested IP addr option: 180.40.7.130 *Mar 2 08:51:39.595: DHCP: SRequest placed lease len option: 86400 *Mar 2 08:51:39.595: DHCP: SRequest: 312 bytes *Mar 2 08:51:39.595: DHCP: SRequest: 312 bytes *Mar 2 08:51:39.595: B'cast on FastEthernet0/0 interface from 0.0.0.0 *Mar 2 08:51:39.603: DHCP: Received a BOOTREP pkt *Mar 2 08:51:39.603: DHCP: Scan: Message type: DHCP Ack *Mar 2 08:51:39.603: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 08:51:39.603: DHCP: Scan: Lease Time: 86400 *Mar 2 08:51:39.603: DHCP: Scan: Renewal time: 43200 *Mar 2 08:51:39.603: DHCP: Scan: Rebind time: 75600 *Mar 2 08:51:39.603: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 08:51:39.603: DHCP: Scan: Router Option: 180.40.7.132, 180.40.7.133, &180.40.7.134& *Mar 2 08:51:39.607: DHCP: Scan: Domain Name: cciestudent.com *Mar 2 08:51:39.607: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 08:51:39.607: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 08:51:39.607: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 08:51:39.607: UDP sport: 43, dport: 44, length: 325 *Mar 2 08:51:39.607: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 08:51:39.607: DHCP server identifier: 180.40.7.129 *Mar 2 08:51:39.607: xid: 70D20B1, secs: 0, flags: 8000 *Mar 2 08:51:39.607: client: 0.0.0.0, your: 180.40.7.130 *Mar 2 08:51:39.607: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 08:51:39.607: options block length: 77 *Mar 2 08:51:39.611: DHCP Ack Message *Mar 2 08:51:39.611: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 08:51:39.611: DHCP: Server ID Option: 180.40.7.129 *Mar 2 08:51:42.619: DHCP: Releasing ipl options: *Mar 2 08:51:42.619: DHCP: Applying DHCP options: *Mar 2 08:51:42.623: Setting default_gateway to 180.40.7.132 *Mar 2 08:51:42.623: Adding default route 180.40.7.132 *Mar 2 08:51:43.623: Adding DNS server address 208.28.1.82 *Mar 2 08:51:43.623: Setting default domain to cciestudent.com *Mar 2 08:51:43.623: DHCP Client Pooling: ***Allocated IP address: 180.40.7.130 *Mar 2 08:51:43.719: Allocated IP address = 180.40.7.130 255.255.255.224 *Mar 2 08:51:43.719: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.130, mask 255.255.255.224, hostname R4 R4(config-if)# R4(config-if)# *Mar 2 08:51:52.635: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 2 08:51:53.627: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/0 from LOADING to FULL, Loading Done R4(config-if)#end R4#sh *Mar 2 08:52:23.659: %SYS-5-CONFIG_I: Configured from console by console R4#sh dom R4#sh dom? % Unrecognized command R4#sh dom   ip ? access-lists List IP access lists accounting The active IP accounting database aliases IP alias table arp IP ARP table as-path-access-list List AS path access lists audit IDS (Intrusion Detection System) information auth-proxy Authentication Proxy information bgp BGP information cache IP fast-switching route cache casa display casa information cef Cisco Express Forwarding community-list List community-list dhcp Show items in the DHCP database dns Show DNS zone information drp Director response protocol dvmrp DVMRP information eigrp IP-EIGRP show commands extcommunity-list List extended-community list flow NetFlow switching helper-address helper-address table http HTTP information igmp IGMP information --More--   inspect CBAC (Context Based Access Control) information interface IP interface status and configuration irdp ICMP Router Discovery Protocol local IP local options masks Masks associated with a network mbgp BGP multicast RIB information mcache IP multicast fast-switching cache mobile IP Mobility information mpacket Display possible duplicate multicast packets mrm IP Multicast Routing Monitor information mroute IP multicast routing table msdp Multicast Source Discovery Protocol (MSDP) mtag IP Multicast Tagswitching TIB multicast Multicast global information nat IP NAT information nbar Network-Based Application Recognition nhrp NHRP information ospf OSPF information pim PIM information policy Policy routing policy-list List IP Policy list port-map Port to Application Mapping (PAM) information prefix-list List IP prefix lists --More--   protocols IP routing protocol process parameters and statistics redirects IP redirects rip IP RIP show commands route IP routing table rpf Display RPF information for multicast source rsvp RSVP information rtp RTP/UDP/IP header-compression statistics sap Session Announcement Protocol cache snat IP NAT SNAT information sockets Open IP sockets ssh Information on SSH tcp TCP/IP header-compression statistics traffic IP protocol statistics trigger-authentication Trigger-authentication host table urlfilter IOS URL Filtering Information vrf VPN Routing/Forwarding instance information wccp WCCP information R4#sh ip    acce      ip acc/ ? access-lists accounting R4#sh ip accou ? access-violations show access violations in accounting database checkpoint The checkpointed IP accounting database output-packets show output packets in accounting database | Output modifiers R4#sh ip accou R4#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 180.40.7.132 to network 0.0.0.0 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/793] via 180.40.7.131, 00:01:11, FastEthernet0/0 [110/793] via 180.40.7.129, 00:01:11, FastEthernet0/0 O 20.10.1.0 [110/783] via 180.40.7.131, 00:01:11, FastEthernet0/0 [110/783] via 180.40.7.129, 00:01:11, FastEthernet0/0 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:01:11, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 6 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/782] via 180.40.7.131, 00:01:12, FastEthernet0/0 [110/782] via 180.40.7.129, 00:01:12, FastEthernet0/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:01:12, FastEthernet0/0 --More--  O 180.40.7.0/27 [110/782] via 180.40.7.129, 00:01:17, FastEthernet0/0 O 180.40.7.65/32 [110/1] via 180.40.7.131, 00:01:17, FastEthernet0/0 O 180.40.7.64/27 [110/782] via 180.40.7.129, 00:01:17, FastEthernet0/0 S* 0.0.0.0/0 [254/0] via 180.40.7.132 R4#confi t Enter configuration commands, one per line. End with CNTL/Z. R4(config)# R4(config)#int fa 0/0 R4(config-if)#ip add 180.40.7.130 255.255.255.224 *Mar 2 08:54:37.023: DHCP: SRelease attempt # 1 for entry: *Mar 2 08:54:37.023: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/0 *Mar 2 08:54:37.023: Temp sub net mask: 255.255.255.224 *Mar 2 08:54:37.027: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 08:54:37.027: DHCP transaction id: 70D20B1 *Mar 2 08:54:37.027: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 08:54:37.027: Temp default-gateway addr: 180.40.7.132 *Mar 2 08:54:37.027: Next timer fires after: 00:00:00 *Mar 2 08:54:37.027: Retry count: 1 Client-ID: cisco-00d0.bbe3.86c0-Fa0/0 *Mar 2 08:54:37.027: Hostname: R4 *Mar 2 08:54:37.027: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 08:54:37.027: DHCP: SRelease: 279 bytes *Mar 2 08:54:37.095: DHCP: SRelease attempt # 2 for entry: *Mar 2 08:54:37.095: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/0 *Mar 2 08:54:37.095: Temp sub net mask: 255.255.255.224 *Mar 2 08:54:37.095: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 08:54:37.095: DHCP transaction id: 70D20B1 *Mar 2 08:54:37.095: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 08:54:37.095: Temp default-gateway addr: 180.40.7.132 *Mar 2 08:54:37.095: Next timer fires after: 00:00:00 *Mar 2 08:54:37.095: Retry count: 2 Client-ID: cisco-00d0.bbe3.86c0-Fa0/0 *Mar 2 08:54:37.095: Hostname: R4 *Mar 2 08:54:37.099: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 08:54:37.099: DHCP: SRelease: 279 bytes *Mar 2 08:54:37.099: DHCP: Releasing ipl options: *Mar 2 08:54:37.099: Clearing default gateway and route to 180.40.7.132 *Mar 2 08:54:37.099: Removing old default route 180.40.7.132 *Mar 2 08:54:37.103: Clearing DNS address 208.28.1.82 *Mar 2 08:54:37.103: Clearing R4(config-if)#default domain of cciestudent.com *Mar 2 08:54:38.023: DHCP: SRelease attempt # 3 for entry: *Mar 2 08:54:38.023: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/0 *Mar 2 08:54:38.023: Temp sub net mask: 255.255.255.224 *Mar 2 08:54:38.023: DHCP Lease server: 180.40.7.129, state: 7 Releasing *Mar 2 08:54:38.023: DHCP transaction id: 70D20B1 *Mar 2 08:54:38.023: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 08:54:38.023: Next timer fires after: 00:00:01 *Mar 2 08:54:38.023: Retry count: 3 Client-ID: cisco-00d0.bbe3.86c0-Fa0/0 *Mar 2 08:54:38.023: Hostname: R4 *Mar 2 08:54:38.023: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 08:54:38.027: DHCP: SRelease: 279 bytes R4(config-if)# *Mar 2 08:54:39.103: RAC: DHCP stopped on interface FastEthernet0/0 R4(config-if)#^Z R4#u *Mar 2 08:54:41.927: %SYS-5-CONFIG_I: Configured from console by console R4#u all All possible debugging has been turned off R4# RACK15AS>3 [Resuming connection 3 to r3 ... ] *Mar R3(dhcp-config)#exit R3(config)#ip dhcp ex R3(config)#ip dhcp excluded-address ? A.B.C.D Low IP address R3(config)#ip dhcp excluded-address 180.; 40.7.130 ? A.B.C.D High IP address R3(config)#ip dhcp excluded-address 180.40.7.130 180.40.7.134 R3(config)#ip dhcp pp ool Mine R3(dhcp-config)#host 180.40.7.129 /27 R3(dhcp-config)#int fa 0/0 R3(config-if)#ip add h dhcp R3(config-if)# *Mar 2 08:53:42.538: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from 2WAY to DOWN, Neighbor Down: Interface down or detached *Mar 2 08:53:42.542: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 08:53:42.542: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Init *Mar 2 08:53:42.546: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Master -> Disable R3(config-if)# RACK15AS>7 [Resuming connection 7 to r7 ... ] *Ma R7# *Mar 1 05:39:55.857: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/1 from FULL to DOWN, Neighbor Down: Dead timer expired R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/1 R7(config-if)#ip help R7(config-if)#ip helper-address 2 180.40.7.66 R7(config-if)# *Mar 1 05:40:31.335: %HSRP-6-STATECHANGE: FastEthernet0/1 Grp 47 state Active -> Speak R7(config-if)# *Mar 1 05:40:33.491: %VRRP-6-STATECHANGE: Fa0/1 Grp 47 state Master -> Backup R7(config-if)# *Mar 1 05:40:39.965: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/1 from LOADING to FULL, Loading Done R7(config-if)#^Z R7# *Mar 1 05:41:51.803: %SYS-5-CONFIG_I: Configured from console by console R7# RACK15AS>3 [Resuming connection 3 to r3 ... ] *Mar R3(config-if)#do sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 180.40.7.135 YES DHCP up up BRI0/0 unassigned YES unset administratively down down BRI0/0:1 unassigned YES unset administratively down down BRI0/0:2 unassigned YES unset administratively down down FastEthernet0/1 unassigned YES unset administratively down down Serial1/0 180.40.7.66 YES manual up up Serial1/1 unassigned YES unset administratively down down Serial1/2 180.40.7.1 YES manual up up Serial1/3 unassigned YES unset administratively down down Serial1/4 unassigned YES unset administratively down down Serial1/5 unassigned YES unset administratively down down --More--   R3(config-if)#do sh ip dhcp bin Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 180.40.7.135 0063.6973.636f.2d30. Mar 03 1993 08:54 AM Automatic 3031.332e.3766.3135. 2e66.3234.302d.4661. 302f.30 R3(config-if)#ip    nbo ip addo ip add  R3(config-if)# *Mar 2 08:57:19.846: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 08:57:19.846: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R3(config-if)# *Mar 2 08:57:19.846: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Init *Mar 2 08:57:19.850: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Master -> Disable R3(config-if)#iu p add dhcp ? client-id Specify client-id to use hostname Specify value for hostname option R3(config-if)#ip add dhcp cl R3(config-if)#ip add dhcp client-id ? FastEthernet FastEthernet IEEE 802.3 Port-channel Ethernet Channel of interfaces R3(config-if)#ip add dhcp client-id fa ? <0-1> FastEthernet interface number R3(config-if)#ip add dhcp client-id fa 0/0 ? hostname Specify value for hostname option R3(config-if)#ip add dhcp client-id fa 0/0                  ? client-id Specify client-id to use hostname Specify value for hostname option R3(config-if)#ip add dhcp cli R3(config-if)#ip add dhcp client-id fa 0/90    0 ? hostname Specify value for hostname option R3(config-if)#ip add dhcp client-id fa 0/0 R3(config-if)# *Mar 2 08:58:00.104: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup *Mar 2 08:58:00.108: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Disable *Mar 2 08:58:00.108: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup *Mar 2 08:58:00.413: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Listen -> Active R3(config-if)# R3(config-if)# *Mar 2 08:58:01.138: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.136, mask 255.255.255.224, hostname R3 R3(config-if)# R3(config-if)# R3(config-if)#do sh ip *Mar 2 08:58:03.642: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Master R3(config-if)#do sh ip dhcp bin Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 180.40.7.135 0063.6973.636f.2d30. Mar 03 1993 08:54 AM Automatic 3031.332e.3766.3135. 2e66.3234.302d.4661. 302f.30 180.40.7.136 0100.137f.15f2.40 Mar 03 1993 08:57 AM Automatic R3(config-if)# *Mar 2 08:58:07.040: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from LOADING to FULL, Loading Done R3(config-if)# *Mar 2 08:58:10.117: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done R3(config-if)#do   sh int fa 0/0 FastEthernet0/0 is up, line protocol is up Hardware is AmdFE, address is 0013.7f15.f240 (bia 0013.7f15.f240) Internet address is 180.40.7.136/27 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 1 packets/sec 5 minute output rate 1000 bits/sec, 1 packets/sec 197913 packets input, 22688744 bytes Received 31510 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog 0 input packets with dribble condition detected 195894 packets output, 21940786 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets --More--   R3(config-if)#do sh int fa 0/0p dhcp binip add dhcp client-id fa 0/0 no ip add do sh ip dhcp binint brieip add dhcp nt fa 0/0 host 180.40.7.129 /27ip dhcp pool Mine excluded-address 180.40.7.130 180.40.7.134pool Mine  R3(dhcp-config)#cli R3(dhcp-config)#client-? client-identifier client-name R3(dhcp-config)#client-i ? WORD Dotted-hexadecimal string (aabb.ccdd.eeff ...) R3(dhcp-config)#client-i          ? DHCP pool configuration commands: accounting Send Accounting Start/Stop messages bootfile Boot file name client-identifier Client identifier client-name Client name default-router Default routers dns-server DNS servers domain-name Domain name exit Exit from DHCP pool configuration mode hardware-address Client hardware address host Client IP address and mask import Programatically importing DHCP option parameters lease Address lease time netbios-name-server NetBIOS (WINS) name servers netbios-node-type NetBIOS node type network Network number and mask next-server Next server in boot process no Negate a command or set its defaults option Raw DHCP options origin Configure the origin of the pool subnet Subnet allocation commands update Dynamic updates --More--   R3(dhcp-config)#cli R3(dhcp-config)#client-i R3(dhcp-config)#client-identifier ? WORD Dotted-hexadecimal string (aabb.ccdd.eeff ...) R3(dhcp-config)#client-identifier 0100.137f.15f2.40 R3(dhcp-config)#client-identifier 0100.137f.15f2.40nclient-identifier 0100.137f.15f2.40oclient-identifier 0100.137f.15f2.40 client-identifier 0100.137f.15f2.40 R3(dhcp-config)#har R3(dhcp-config)#hardware-address ? WORD Dotted-hexadecimal string (aabb.ccdd.eeff ...) R3(dhcp-config)#hardware-address 0100.137f.15f2.4001\00.137f.15f2.4000.137f.15f2.40 00.137f.15f2.40 00.10.137f.15f2.40 00.137f.15f2.40 13.7f.15f2.407f.1.15f2.40 15.f2.40f2.40  R3(dhcp-config)#int fa 0/0 R3(config-if)#int fa 0/0hardware-address 0013.7f15.f240no client-identifier 0100.137f.15f2.40client-identifier 0100.137f.15f2.40 ip dhcp pool Mine do sh int fa 0/0 p dhcp binip add dhcp client-id fa 0/0 nip add dhcp client-id fa 0/0 oip add dhcp client-id fa 0/0  ip add dhcp client-id fa 0/0  R3(config-if)# *Mar 2 09:00:50.115: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 09:00:50.115: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R3(config-if)# *Mar 2 09:00:50.119: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Init *Mar 2 09:00:50.119: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Master -> Disable R3(config-if)#no ip add dhcp client-id fa 0/0 no ip add dhcp client-id fa 0/0  ip add dhcp client-id fa 0/0  R3(config-if)#do sh ip dhcp *Mar 2 09:01:00.412: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup *Mar 2 09:01:00.416: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Disable *Mar 2 09:01:00.416: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup R3(config-if)#do sh ip dhcp *Mar 2 09:01:01.458: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.136, mask 255.255.255.224, hostname R3 *Mar 2 09:01:01.470: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Listen -> Active R3(config-if)#do sh ip dhcp bin Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 180.40.7.129 0013.7f15.f240 Infinite Manual 180.40.7.135 0063.6973.636f.2d30. Mar 03 1993 08:54 AM Automatic 3031.332e.3766.3135. 2e66.3234.302d.4661. 302f.30 180.40.7.136 0100.137f.15f2.40 Mar 03 1993 09:00 AM Automatic R3(config-if)# *Mar 2 09:01:03.950: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Master R3(config-if)# *Mar 2 09:01:07.039: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from LOADING to FULL, Loading Done R3(config-if)# *Mar 2 09:01:10.424: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done R3(config-if)#do sh ip it           do db dhcp de db dhcp de ^ % Invalid input detected at '^' marker. R3(config-if)#do db dhcp debeb dhcp de DHCP client activity debugging is on (detailed) R3(config-if)#do deb dhcp deb dhcp de sh ip dhcp bin ip add dhcp client-id fa 0/0 no ip add dhcp client-id fa 0/0 *Mar 2 09:02:11.853: DHCP: SRelease attempt # 1 for entry: *Mar 2 09:02:11.853: Temp IP addr: 180.40.7.136 for peer on Interface: FastEthernet0/0 *Mar 2 09:02:11.853: Temp sub net mask: 255.255.255.224 *Mar 2 09:02:11.853: DHCP Lease server: 180.40.7.66, state: 7 Releasing *Mar 2 09:02:11.853: DHCP transaction id: 715A9AD *Mar 2 09:02:11.853: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 09:02:11.857: Temp default-gateway addr: 180.40.7.132 *Mar 2 09:02:11.857: Next timer fires after: 00:00:00 *Mar 2 09:02:11.857: Retry count: 1 Client-ID: 0013.7f15.f240 *Mar 2 09:02:11.857: Hostname: R3 *Mar 2 09:02:11.857: DHCP: SRelease placed Server ID option: 180.40.7.66 *Mar 2 09:02:11.857: DHCP: SRelease: 259 bytes *Mar 2 09:02:11.921: DHCP: SRelease attempt # 2 for entry: *Mar 2 09:02:11.921: Temp IP addr: 180.40.7.136 for peer on Interface: FastEthernet0/0 *Mar 2 09:02:11.921: Temp sub net mask: 255.255.255.224 *Mar 2 09:02:11.921: DHCP Lease server: 180.40.7.66, state: 7 Releasing *Mar 2 09:02:11.921: DHCP transaction id: 715A9AD *Mar 2 09:02:11.921: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 09:02:11.921: Temp default-gateway addr: 180.40.7.132 *Mar 2 09:02:11.921: Next timer fires after: 00:00:00 *Mar 2 09:02:11.921: Retry count: 2 Client-ID: 0013.7f15.f240 *Mar 2 09:02:11.921: Hostname: R3 *Mar 2 09:02:11.921: DHCP: SRelease placed Server ID option: 180.40.7.66 *Mar 2 09:02:11.925: DHCP: SRelease: 259 bytes *Mar 2 09:02:11.925: DHCP: Releasing ipl options: *Mar 2 09:02:11.925: Clearing default gateway and route to 180.40.7.132 *Mar 2 09:02:11.925: Removing old default route 180.40.7.132 *Mar 2 09:02:11.929: Clearing route to DHCP server 180.40.7.66 *Mar 2 09:02:11.929: Clearing DNS address 208.28.1.82 *Mar 2 09 R3(config-if)#:02:11.929: Clearing default domain of cciestudent.com *Mar 2 09:02:12.855: DHCP: SRelease attempt # 3 for entry: *Mar 2 09:02:12.855: Temp IP addr: 180.40.7.136 for peer on Interface: FastEthernet0/0 *Mar 2 09:02:12.855: Temp sub net mask: 255.255.255.224 *Mar 2 09:02:12.855: DHCP Lease server: 180.40.7.66, state: 7 Releasing *Mar 2 09:02:12.855: DHCP transaction id: 715A9AD *Mar 2 09:02:12.855: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 09:02:12.855: Next timer fires after: 00:00:01 *Mar 2 09:02:12.855: Retry count: 3 Client-ID: 0013.7f15.f240 *Mar 2 09:02:12.855: Hostname: R3 *Mar 2 09:02:12.855: DHCP: SRelease placed Server ID option: 180.40.7.66 *Mar 2 09:02:12.855: DHCP: SRelease: 259 bytes *Mar 2 09:02:13.932: RAC: DHCP stopped on interface FastEthernet0/0 *Mar 2 09:02:13.932: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 09:02:13.932: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 09:02:13.936: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Init *Mar 2 09:02:13.936: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Master -> Disable R3(config-if)# R3(config-if)#no ip add dhcp client-id fa 0/0 do deb dhcp de b dhcp de sh ip dhcp bin ip add dhcp client-id fa 0/0 R3(config-if)# *Mar 2 09:02:20.203: DHCP: DHCP client process started: 10 *Mar 2 09:02:20.207: RAC: Starting DHCP discover on FastEthernet0/0 *Mar 2 09:02:20.207: DHCP: Try 1 to acquire address for FastEthernet0/0 *Mar 2 09:02:20.219: DHCP: allocate request *Mar 2 09:02:20.223: DHCP: zapping entry in DHC_PURGING state for Fa0/0 *Mar 2 09:02:20.223: DHCP: new entry. add to queue *Mar 2 09:02:20.223: DHCP: SDiscover attempt # 1 for entry: *Mar 2 09:02:20.223: Temp IP addr: 0.0.0.0 for peer on Interface: FastEthernet0/0 *Mar 2 09:02:20.223: Temp sub net mask: 0.0.0.0 *Mar 2 09:02:20.223: DHCP Lease server: 0.0.0.0, state: 1 Selecting *Mar 2 09:02:20.223: DHCP transaction id: 717055F *Mar 2 09:02:20.223: Lease: 0 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 09:02:20.223: Next timer fires after: 00:00:03 *Mar 2 09:02:20.223: Retry count: 1 Client-ID: 0013.7f15.f240 *Mar 2 09:02:20.223: Hostname: R3 *Mar 2 09:02:20.227: DHCP: SDiscover: sending 274 R3(config-if)#byte length DHCP packet *Mar 2 09:02:20.227: DHCP: SDiscover 274 bytes *Mar 2 09:02:20.227: B'cast on FastEthernet0/0 interface from 0.0.0.0 *Mar 2 09:02:20.523: DHCP: Received a BOOTREP pkt *Mar 2 09:02:20.523: DHCP: Scan: Message type: DHCP Offer *Mar 2 09:02:20.523: DHCP: Scan: Server ID Option: 180.40.7.66 = B4280742 *Mar 2 09:02:20.527: DHCP: Scan: Lease Time: 86317 *Mar 2 09:02:20.527: DHCP: Scan: Renewal time: 43158 *Mar 2 09:02:20.527: DHCP: Scan: Rebind time: 75527 *Mar 2 09:02:20.527: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 09:02:20.527: DHCP: Scan: Router Option: 180.40.7.132, 180.40.7.133, &180.40.7.134& *Mar 2 09:02:20.527: DHCP: Scan: Domain Name: cciestudent.com *Mar 2 09:02:20.527: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 09:02:20.527: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 09:02:20.527: DHCP: rcvd pkt source: 180.40.7.131, destination: 255.255.255.255 *Mar 2 09:02:20.527: UDP sport: 43, dport: 44, length: 325 *Mar 2 09:02:20.531: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 09:02:20.531: DHCP server identifier: 180.40.7.66 *Mar 2 09:02:20.531: xid: 717055F, secs: 0, flags: 8000 *Mar 2 09:02:20.531: client: 0.0.0.0, your: 180.40.7.136 *Mar 2 09:02:20.531: srvr: 0.0.0.0, gw: 180.40.7.131 *Mar 2 09:02:20.531: options block length: 77 *Mar 2 09:02:20.531: DHCP Offer Message Offered Address: 180.40.7.136 *Mar 2 09:02:20.531: DHCP: Lease Seconds: 86317 Renewal secs: 43158 Rebind secs: 75527 *Mar 2 09:02:20.531: DHCP: Server ID Option: 180.40.7.66 *Mar 2 09:02:20.531: DHCP: offer received from 180.40.7.66 *Mar 2 09:02:20.531: DHCP: SRequest attempt # 1 for entry: *Mar 2 09:02:20.535: Temp IP addr: 180.40.7.136 for peer on Interface: FastEthernet0/0 *Mar 2 09:02:20.535: Temp sub net mask: 255.255.255.224 *Mar 2 09:02:20.535: DHCP Lease server: 180.40.7.66, state: 2 Requesting *Mar 2 09:02:20.535: DHCP transaction id: 717055F *Mar 2 09:02:20.535: Lease: 86317 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 09:02:20.535: Next timer fires after: 00:00:01 *Mar 2 09:02:20.535: Retry count: 1 Client-ID: 0013.7f15.f240 *Mar 2 09:02:20.535: Hostname: R3 *Mar 2 09:02:20.535: DHCP: SRequest- Server ID option: 180.40.7.66 *Mar 2 09:02:20.535: DHCP: SRequest- Requested IP addr option: 180.40.7.136 *Mar 2 09:02:20.535: DHCP: SRequest placed lease len option: 86317 *Mar 2 09:02:20.539: DHCP: SRequest: 292 bytes *Mar 2 09:02:20.539: DHCP: SRequest: 292 bytes *Mar 2 09:02:20.539: B'cast on FastEthernet0/0 interface from 0.0.0.0 *Mar 2 09:02:20.836: DHCP: Received a BOOTREP pkt *Mar 2 09:02:20.836: DHCP: Scan: Message type: DHCP Ack *Mar 2 09:02:20.836: DHCP: Scan: Server ID Option: 180.40.7.66 = B4280742 *Mar 2 09:02:20.840: DHCP: Scan: Lease Time: 86400 *Mar 2 09:02:20.840: DHCP: Scan: Renewal time: 43200 *Mar 2 09:02:20.840: DHCP: Scan: Rebind time: 75600 *Mar 2 09:02:20.840: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 09:02:20.840: DHCP: Scan: Router Option: 180.40.7.132, 180.40.7.133, &180.40.7.134& *Mar 2 09:02:20.840: DHCP: Scan: Domain Name: cciestudent.com *Mar 2 09:02:20.840: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 09:02:20.840: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 09:02:20.840: DHCP: rcvd pkt source: 180.40.7.131, destination: 255.255.255.255 *Mar 2 09:02:20.840: UDP sport: 43, dport: 44, length: 325 *Mar 2 09:02:20.844: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 09:02:20.844: DHCP server identifier: 180.40.7.66 *Mar 2 09:02:20.844: xid: 717055F, secs: 0, flags: 8000 *Mar 2 09:02:20.844: client: 0.0.0.0, your: 180.40.7.136 *Mar 2 09:02:20.844: srvr: 0.0.0.0, gw: 180.40.7.131 *Mar 2 09:02:20.844: options block length: 77 *Mar 2 09:02:20.844: DHCP Ack Message *Mar 2 09:02:20.844: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 09:02:20.844: DHCP: Server ID Option: 180.40.7.66 *Mar 2 09:02:23.853: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup *Mar 2 09:02:23.857: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Disable *Mar 2 09:02:23.861: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup *Mar 2 09:02:23.865: DHCP: Releasing ipl options: *Mar 2 09:02:23.865: DHCP: Applying DHCP options: *Mar 2 09:02:23.865: Setting default_gateway to 180.40.7.132 *Mar 2 09:02:23.865: Adding default route 180.40.7.132 *Mar 2 09:02:24.874: Adding route to DHCP server 180.40.7.66 via FastEthernet0/0 180.40.7.132 *Mar 2 09:02:24.874: Adding DNS server address 208.28.1.82 *Mar 2 09:02:24.874: Setting default domain to cciestudent.com *Mar 2 09:02:24.874: DHCP Client Pooling: ***Allocated IP address: 180.40.7.136 *Mar 2 09:02:24.942: Allocated IP address = 180.40.7.136 255.255.255.224 *Mar 2 09:02:24.942: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.136, mask 255.255.255.224, hostname R3 *Mar 2 09:02:26.513: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Listen -> Active *Mar 2 09:02:27.390: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Master R3(config-if)# R3(config-if)# *Mar 2 09:02:33.865: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 2 09:02:33.869: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from LOADING to FULL, Loading Done R3(config-if)# *Mar 2 09:02:43.857: DHCP: QScan: Purging entry *Mar 2 09:02:43.857: DHCP: deleting entry 83993D04 0.0.0.0 from list *Mar 2 09:02:43.857: Temp IP addr: 0.0.0.0 for peer on Interface: unknown *Mar 2 09:02:43.857: Temp sub net mask: 255.255.255.224 *Mar 2 09:02:43.857: DHCP Lease server: 180.40.7.66, state: 8 Purging *Mar 2 09:02:43.857: DHCP transaction id: 715A9AD *Mar 2 09:02:43.857: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 09:02:43.857: Temp default-gateway addr: 180.40.7.132 *Mar 2 09:02:43.857: No timer running *Mar 2 09:02:43.857: Retry count: 0 Client-ID: *Mar 2 09:02:43.861: Hostname: R3 R3(config-if)#do u all All possible debugging has been turned off R3(config-if)#ip dhcp pop ol Mine R3(dhcp-config)#ip dhcp pool Minedo u all  ip add dhcp client-id fa 0/0 no ip add dhcp client-id fa 0/0 do deb dhcp de b dhcp de sh ip dhcp bin ip add dhcp client-id fa 0/0 no ip add dhcp client-id fa 0/0 int fa 0/0 hardware-address 0013.7f15.f240nhardware-address 0013.7f15.f240ohardware-address 0013.7f15.f240 hardware-address 0013.7f15.f240 R3(dhcp-config)#cli R3(dhcp-config)#client- -i R3(dhcp-config)#client-identifier 0100.137f.15f2.40 R3(dhcp-config)#int fa 0/0 R3(config-if)#int fa 0/0client-identifier 0100.137f.15f2.40no hardware-address 0013.7f15.f240 ip dhcp pool Mine do u all  ip add dhcp client-id fa 0/0 n ip add dhcp client-id fa 0/0 o ip add dhcp client-id fa 0/0  ip add dhcp client-id fa 0/0  R3(config-if)#no ip add dhcp client-id fa 0/0 int fa 0/0  *Mar 2 09:04:02.811: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 09:04:02.811: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R3(config-if)#int fa 0/0 *Mar 2 09:04:02.811: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Init *Mar 2 09:04:02.815: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Master -> Disable R3(config-if)#int fa 0/0client-identifier 0100.137f.15f2.40int fa 0/0 no ip add dhcp client-id fa 0/0 no ip add dhcp client-id fa 0/0  ip add dhcp client-id fa 0/0  ip add dhcp client-id fa 0/0  R3(config-if)# *Mar 2 09:04:12.350: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup *Mar 2 09:04:12.354: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Disable *Mar 2 09:04:12.354: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup *Mar 2 09:04:12.543: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Listen -> Active R3(config-if)# *Mar 2 09:04:13.460: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.136, mask 255.255.255.224, hostname R3 R3(config-if)# *Mar 2 09:04:15.888: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Master R3(config-if)# *Mar 2 09:04:22.363: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 2 09:04:22.367: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from LOADING to FULL, Loading Done R3(config-if)#do clea ip dhcp bin * R3(config-if)#do clea ip dhcp bin * ip add dhcp client-id fa 0/0 n ip add dhcp client-id fa 0/0 o ip add dhcp client-id fa 0/0  R3(config-if)#no ip add dhcp client-id fa 0/0 *Mar 2 09:04:43.882: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 09:04:43.882: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached R3(config-if)#no ip add dhcp client-id fa 0/0 do clea ip dhcp bin *  *Mar 2 09:04:43.882: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Init *Mar 2 09:04:43.886: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Master -> Disable R3(config-if)#do clea ip dhcp bin * ip add dhcp client-id fa 0/0 R3(config-if)# *Mar 2 09:04:53.434: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup *Mar 2 09:04:53.438: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Disable *Mar 2 09:04:53.438: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup R3(config-if)# *Mar 2 09:04:54.492: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.129, mask 255.255.255.224, hostname R3 R3(config-if)# *Mar 2 09:04:55.553: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Listen -> Active R3(config-if)# *Mar 2 09:04:56.972: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Master R3(config-if)# *Mar 2 09:05:02.032: %OSPF-5-ADJCHG: Process 1, Nbr 208.28.1.1 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 2 09:05:02.036: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from LOADING to FULL, Loading Done R3(config-if)#^Z R3#sh *Mar 2 09:05:24.625: %SYS-5-CONFIG_I: Configured from console by console R3#sh run | b dhcp ip dhcp excluded-address 180.40.7.130 180.40.7.134 ! ip dhcp pool Prob15 network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 180.40.7.133 180.40.7.134 domain-name cciestudent.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! ip dhcp pool Mine host 180.40.7.129 255.255.255.224 client-identifier 0100.137f.15f2.40 ! ip cef no ip domain lookup ip audit po max-events 100 ! ! ! ! ! ! ! --More--   R3#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 180.40.7.132 to network 0.0.0.0 100.0.0.0/32 is subnetted, 1 subnets O 100.1.1.1 [110/2] via 180.40.7.130, 00:00:35, FastEthernet0/0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/792] via 180.40.7.2, 00:00:35, Serial1/2 [110/792] via 180.40.7.67, 00:00:35, Serial1/0 O 20.10.1.0 [110/782] via 180.40.7.2, 00:00:35, Serial1/2 [110/782] via 180.40.7.67, 00:00:35, Serial1/0 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:00:35, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 6 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/781] via 180.40.7.2, 00:00:36, Serial1/2 [110/781] via 180.40.7.67, 00:00:36, Serial1/0 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:00:36, FastEthernet0/0 --More--  C 180.40.7.0/27 is directly connected, Serial1/2 O 180.40.7.65/32 [110/1] via 180.40.7.131, 00:00:36, FastEthernet0/0 C 180.40.7.64/27 is directly connected, Serial1/0 S* 0.0.0.0/0 [254/0] via 180.40.7.132 R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip dhcp pool Prob15 R3(dhcp-config)#host >? % Unrecognized command R3(dhcp-config)#host > ? A.B.C.D IP address in dotted-decimal notation R3(dhcp-config)#host 180.40l .7.129 /27 % This command may not be used with network, origin or vrf pools. R3(dhcp-config)#^Z R3#sh run | *Mar 2 09:08:27.312: %SYS-5-CONFIG_I: Configured from console by console R3#sh run |  b &x7 RACK15AS>7 [Resuming connection 7 to r7 ... ] *Ma R7#sh run int fa 0/1 Building configuration... Current configuration : 232 bytes ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 speed auto half-duplex vrrp 47 ip 180.40.7.133 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7#^x2 % Unknown command or computer name, or unable to find computer address R7# RACK15AS>2 [Resuming connection 2 to r2 ... ] R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#! R2(config)#ip dhcp pool ForS6 R2(dhcp-config)# host 180.40.7.97 255.255.255.224 R2(dhcp-config)# client-identifier 0063.6973.636f.2d30.3031.332e.3830.6366.$dentifier 0063.6973.636f.2d30.3031.332e.3830.6366.2 e65.3738.0063.6973.636f.2d30.3031.332e.3830.6366.2e65.3738.3 02d.4661.636f.2d30.3031.332e.3830.6366.2e65.3738.302d.4661.3 02f.32 R2(dhcp-config)#$636f.2d30.3031.332e.3830.6366.2e65.3738.302d.4661.302f.32 host 180.40.7.97 255.255.255.224 \\\\\\\\\\\\\\\\\\                                             20.10.1.2 /24 R2(dhcp-config)#do sh run | b dhcp % Ambiguous command: "do sh run | b dhcp" R2(config)#do sh run | b dhcph run | b d ip dhcp pool ForS6 host 20.10.1.2 255.255.255.0 client-identifier 0063.6973.636f.2d30.3031.332e.3830.6366.2e65.3738.302d.4661.302f.32 ! ip cef no ip domain lookup ip audit po max-events 100 frame-relay de-list 1 protocol ip list 100 ! ! ! ! ! ! ! ! ! ! ! ! ! ! --More--   R2(config)#int fa 0/1 R2(config-if)#ip a hee l R2(config-if)#ip hel R2(config-if)#ip help R2(config-if)#ip helper-address er R2(config-if)#ip helper-address er  208.28.199.99 R2(config-if)#^Z R2# RACK15AS>7 [Resuming connection 7 to r7 ... ] R7#sh run int s 1/0.2 Building configuration... Current configuration : 157 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip ospf network point-to-multipoint frame-relay interface-dlci 702 end R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0.1 R7(config-subif)#int s 1/0.1 2 R7(config-subif)#ip help 208.28.1.99 R7(config-subif)#frame-relay interface-dlci 702 ? cisco Use CISCO Encapsulation ietf Use RFC1490/RFC2427 Encapsulation ppp Use RFC1973 Encapsulation to support PPP over FR protocol Optional protocol information for remote end R7(config-subif)#frame-relay interface-dlci 702 protocol ? A.B.C.D Protocol specific address ip IP R7(config-subif)#frame-relay interface-dlci 702 protocol ip ? A.B.C.D Protocol specific address R7(config-subif)#frame-relay interface-dlci 702 protocol ip 180- .40.7.162 %Can't add another VC to point-to-point subinterface R7(config-fr-dlci)#exit R7(config-subif)#no frame-relay interface-dlci 702 R7(config-subif)#no frame-relay interface-dlci 702 *Mar 1 06:00:56.904: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from FULL to DOWN, Neighbor Down: Interface down or detached R7(config-subif)#no frame-relay interface-dlci 702exit frame-relay interface-dlci 702 protocol ip 180.40.7.162 R7(config-fr-dlci)# *Mar 1 06:01:21.817: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/0.2 from LOADING to FULL, Loading Done R7(config-fr-dlci)#^Z R7# *Mar 1 06:01:54.511: %SYS-5-CONFIG_I: Configured from console by console R7# RACK15AS>2 [Resuming connection 2 to r2 ... ] * R2#sh run | b dhcp ip dhcp pool ForS6 host 20.10.1.2 255.255.255.0 client-identifier 0063.6973.636f.2d30.3031.332e.3830.6366.2e65.3738.302d.4661.302f.32 ! ip cef no ip domain lookup ip audit po max-events 100 frame-relay de-list 1 protocol ip list 100 ! ! ! ! ! ! ! ! ! ! ! ! ! ! --More--  ! ! ! ! ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 20.10.1.1 255.255.255.0 ip helper-address 208.28.1.99 duplex auto speed auto ! interface Serial1/0 --More-- RACK15AS>7 [Resuming connection 7 to r7 ... ] R7#sh run itn  nt s 1/0./ 1 2 Building configuration... Current configuration : 210 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay interface-dlci 702 protocol ip 180.40.7.162 end R7# R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 0/1 R7(config-if)#gl R7(config-if)#glbp ? <0-1023> Group number R7(config-if)#glbp 47 ? authentication Authentication method forwarder Forwarder configuration ip Enable group and set virtual IP address load-balancing Load balancing method preempt Overthrow lower priority designated routers priority Priority level timers Adjust GLBP timers weighting Gateway weighting and tracking R7(config-if)#glbp 47 ip 180.40.7.134 ? secondary Make this IP address a secondary address R7(config-if)#glbp 47 ip 180.40.7.134 R7(config-if)# *Mar 1 06:04:59.161: %GLBP-6-STATECHANGE: FastEthernet0/1 Grp 47 state Standby -> Active R7(config-if)# *Mar 1 06:05:09.162: %GLBP-6-FWDSTATECHANGE: FastEthernet0/1 Grp 47 Fwd 1 state Listen -> Active R7(config-if)#do sh glbp FastEthernet0/1 - Group 47 State is Active 2 state changes, last state change 00:00:44 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 0.588 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is local Standby is unknown Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Load balancing: round-robin There is 1 forwarder (1 active) Forwarder 1 State is Active 1 state change, last state change 00:00:34 MAC address is 0007.b400.2f01 (default) Owner ID is 0013.7f12.a521 Redirection enabled Preemption enabled, min delay 30 sec Active is local, weighting 100 R7(config-if)# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3# R3 R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#gl R3(config-if)#glbp 47 ip 180.40.7.134 R3(config-if)# *Mar 2 09:21:56.174: %GLBP-6-FWDSTATECHANGE: FastEthernet0/0 Grp 47 Fwd 2 state Listen -> Active R3(config-if)#^Z R3#sh gl *Mar 2 09:22:07.224: %SYS-5-CONFIG_I: Configured from console by console R3#sh glbp FastEthernet0/0 - Group 47 State is Standby 1 state change, last state change 00:00:07 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.686 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 8.758 sec) Standby is local Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Load balancing: round-robin There are 2 forwarders (1 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 0013.7f12.a521 Time to live: 14398.754 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 8.754 sec) Forwarder 2 State is Active --More--   1 state change, last state change 00:01:02 MAC address is 0007.b400.2f02 (default) Owner ID is 0013.7f15.f240 Preemption enabled, min delay 30 sec Active is local, weighting 100 R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#track 4 ip ? route IP route R3(config)#track 4 ip rou 20.10.1.0  /24 re R3(config)#track 4 ip rou 20.10.1.0/24 reachability ? R3(config)#track 4 ip rou 20.10.1.0/24 reachability R3(config-track)#int fa 0/0 R3(config-if)#gl R3(config-if)#glbp 47 ? authentication Authentication method forwarder Forwarder configuration ip Enable group and set virtual IP address load-balancing Load balancing method preempt Overthrow lower priority designated routers priority Priority level timers Adjust GLBP timers weighting Gateway weighting and tracking R3(config-if)#glbp 47 wei R3(config-if)#glbp 47 weighting ? <1-254> Weighting maximum value track Interface tracking R3(config-if)#glbp 47 weighting tr R3(config-if)#glbp 47 weighting track ? <1-500> Tracked object R3(config-if)#glbp 47 weighting track 4 ? decrement Weighting decrement R3(config-if)#glbp 47 weighting track 4 dec R3(config-if)#glbp 47 weighting track 4 decrement ? <1-255> Decrement value R3(config-if)#glbp 47 weighting track 4 decrement 50 R3(config-if)#glbp 47 weighting track 4 decrement 50 decrement 50 1 decrement 50 R3(config-if)#glbp 47 weighting track 1 decrement 50 decrement 50 2 decrement 50 R3(config-if)#do sh glbp FastEthernet0/0 - Group 47 State is Standby 1 state change, last state change 00:03:58 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.577 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 8.638 sec) Standby is local Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Track object 1 state Up decrement 50 Track object 2 state Up decrement 50 Track object 4 state Up decrement 50 Load balancing: round-robin There are 2 forwarders (1 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 0013.7f12.a521 Time to live: 14398.634 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec --More--   R3(config-if)#gl R3(config-if)#glbp 47 wi R3(config-if)#glbp 47 wi e R3(config-if)#glbp 47 weighting ? <1-254> Weighting maximum value track Interface tracking R3(config-if)#glbp 47 weighting 100 ? lower Weighting lower threshold upper Weighting upper threshold R3(config-if)#glbp 47 weighting 100 lo R3(config-if)#glbp 47 weighting 100 lower 75 ? upper Weighting upper threshold R3(config-if)#glbp 47 weighting 100 lower 75 up R3(config-if)#glbp 47 weighting 100 lower 75 upper 100? <75-100> R3(config-if)#glbp 47 weighting 100 lower 75 upper 100 R3(config-if)#^Z R3# *Mar 2 09:27:42.314: %SYS-5-CONFIG_I: Configured from console by console R3# RACK15AS>7 [Resuming connection 7 to r7 ... ] R7(config-if)#glbp 47 weighting 100 lower 75 upper 100 R7(config-if)#^Z R7# *Mar 1 06:13:32.587: %SYS-5-CONFIG_I: Configured from console by console R7# RACK15AS>2 [Resuming connection 2 to r2 ... ]   no ip address --More--   R2#conif t ^ % Invalid input detected at '^' marker. R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/2 R2(config-if)#shut R2(config-if)# RACK15AS>3 [Resuming connection 3 to r3 ... ] *Mar 2 09:28:17.279: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Speak *Mar 2 09:28:18.068: %LINK-3-UPDOWN: Interface Serial1/2, changed state to down R3# R3# *Mar 2 09:28:18.068: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/2 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 09:28:19.070: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to down R3#sh glbp FastEthernet0/0 - Group 47 State is Standby 1 state change, last state change 00:06:40 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.602 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 8.650 sec) Standby is local Priority 100 (default) Weighting 50, low (configured 100), thresholds: lower 75, upper 100 Track object 1 state Down decrement 50 Track object 2 state Up decrement 50 Track object 4 state Up decrement 50 Load balancing: round-robin There are 2 forwarders (1 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 0013.7f12.a521 Time to live: 14398.646 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec --More--   Active is 180.40.7.131 (primary), weighting 100 (expires in 9.599 sec) Forwarder 2 State is Active 1 state change, last state change 00:06:49 MAC address is 0007.b400.2f02 (default) Owner ID is 0013.7f15.f240 Preemption enabled, min delay 30 sec Active is local, weighting 50 R3# *Mar 2 09:28:48.318: %GLBP-6-FWDSTATECHANGE: FastEthernet0/0 Grp 47 Fwd 2 state Active -> Listen R3#sh glbp FastEthernet0/0 - Group 47 State is Standby 1 state change, last state change 00:07:10 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.305 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 8.353 sec) Standby is local Priority 100 (default) Weighting 50, low (configured 100), thresholds: lower 75, upper 100 Track object 1 state Down decrement 50 Track object 2 state Up decrement 50 Track object 4 state Up decrement 50 Load balancing: round-robin There are 2 forwarders (0 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 0013.7f12.a521 Time to live: 14398.349 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec --More--   Active is 180.40.7.131 (primary), weighting 100 (expires in 7.756 sec) Forwarder 2 State is Listen 2 state changes, last state change 00:00:29 MAC address is 0007.b400.2f02 (default) Owner ID is 0013.7f15.f240 Preemption enabled, min delay 30 sec Active is 180.40.7.131 (secondary), weighting 100 (expires in 7.756 sec) R3#x7 Translating "x7" Translating "x7" % Unknown command or computer name, or unable to find computer address R3# R3# RACK15AS>7 [Resuming connection 7 to r7 ... ] *Mar R7#sh glbp FastEthernet0/1 - Group 47 State is Active 2 state changes, last state change 00:10:13 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.461 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is local Standby is 180.40.7.129, priority 100 (expires in 8.401 sec) Priority 100 (default) Weighting 100 (configured 100), thresholds: lower 75, upper 100 Load balancing: round-robin There are 2 forwarders (2 active) Forwarder 1 State is Active 1 state change, last state change 00:10:03 MAC address is 0007.b400.2f01 (default) Owner ID is 0013.7f12.a521 Redirection enabled Preemption enabled, min delay 30 sec Active is local, weighting 100 Forwarder 2 --More--   State is Active 1 state change, last state change 00:00:48 MAC address is 0007.b400.2f02 (learnt) Owner ID is 0013.7f15.f240 Redirection enabled, 551.857 sec remaining (maximum 600 sec) Time to live: 14351.857 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is local, weighting 100 R7# RACK15AS>2 [Resuming connection 2 to r2 ... ] *M R2(config-if)#no shut R2(config-if)#^Z R2# RACK15AS>3 [Resuming connection 3 to r3 ... ] R3#x7sh glbp *Mar 2 09:31:01.400: %LINK-3-UPDOWN: Interface Serial1/2, changed state to up *Mar 2 09:31:02.334: %HSRP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active R3#sh glbp FastEthernet0/0 - Group 47 State is Standby 1 state change, last state change 00:08:59 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 0.255 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 7.315 sec) Standby is local Priority 100 (default) Weighting 100 (configured 100), thresholds: lower 75, upper 100 Track object 1 state Up decrement 50 Track object 2 state Up decrement 50 Track object 4 state Up decrement 50 Load balancing: round-robin There are 2 forwarders (0 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 0013.7f12.a521 Time to live: 14397.311 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec --More-- *Mar 2 09:31:02.402: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed state to up --More--   Active is 180.40.7.131 (primary), weighting 100 (expires in 9.511 sec) Forwarder 2 State is Listen 2 state changes, last state change 00:02:15 MAC address is 0007.b400.2f02 (default) Owner ID is 0013.7f15.f240 Preemption enabled, min delay 30 sec (29 secs remaining) Active is 180.40.7.131 (secondary), weighting 100 (expires in 9.507 sec) R3# *Mar 2 09:31:11.529: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.162 on Serial1/2 from LOADING to FULL, Loading Done R3#sh glbp FastEthernet0/0 - Group 47 State is Standby 1 state change, last state change 00:09:11 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 0.628 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.131, priority 100 (expires in 7.684 sec) Standby is local Priority 100 (default) Weighting 100 (configured 100), thresholds: lower 75, upper 100 Track object 1 state Up decrement 50 Track object 2 state Up decrement 50 Track object 4 state Up decrement 50 Load balancing: round-robin There are 2 forwarders (0 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 0013.7f12.a521 Time to live: 14397.680 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec --More--   Active is 180.40.7.131 (primary), weighting 100 (expires in 9.655 sec) Forwarder 2 State is Listen 2 state changes, last state change 00:02:27 MAC address is 0007.b400.2f02 (default) Owner ID is 0013.7f15.f240 Preemption enabled, min delay 30 sec (17 secs remaining) Active is 180.40.7.131 (secondary), weighting 100 (expires in 9.651 sec) R3# *Mar 2 09:31:33.429: %GLBP-6-FWDSTATECHANGE: FastEthernet0/0 Grp 47 Fwd 2 state Listen -> Active R3#sh run | b track track 3 ip route 20.10.2.0 255.255.255.0 reachability ! track 4 ip route 20.10.1.0 255.255.255.0 reachability ! ! ! class-map match-all dscp26 match dscp af31 class-map match-all dscp14 match dscp af13 class-map match-all telnet match protocol telnet class-map match-all dscp12 match dscp af12 class-map match-all dscp28 match dscp af32 class-map match-all prec1 match ip precedence 1 class-map match-all prec3 match ip precedence 3 class-map match-all ftp match protocol ftp ! --More--  ! policy-map test class dscp12 class dscp14 class dscp26 class dscp28 class prec3 class prec1 policy-map FromR3 class dscp12 priority percent 25 class ftp bandwidth remaining percent 51 class telnet bandwidth remaining percent 24 class class-default bandwidth remaining percent 25 ! ! ! ! ! ! --More--  interface FastEthernet0/0 ip address dhcp client-id FastEthernet0/0 ip policy route-map Prob1 duplex auto speed auto vrrp 47 ip 180.40.7.133 vrrp 47 priority 120 glbp 47 ip 180.40.7.134 glbp 47 weighting 100 lower 75 glbp 47 weighting track 1 decrement 50 glbp 47 weighting track 2 decrement 50 glbp 47 weighting track 4 decrement 50 standby 47 ip 180.40.7.132 standby 47 priority 120 standby 47 preempt standby 47 name hsrp standby 47 track Serial1/2 25 standby 47 track Serial1/0 25 standby 47 track 3 decrement 30 service-policy input test ! interface BRI0/0 no ip address --More--   R3# RACK15AS>7 [Resuming connection 7 to r7 ... ] *Ma R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#track 1 ip ? route IP route R7(config)#track 1 ip rout 20.10.1.0  /24 re R7(config)#track 1 ip rout 20.10.1.0/24 reachability R7(config-track)#int fa 0/1 R7(config-if)#gl R7(config-if)#glbp 47 w R7(config-if)#glbp 47 weighting tr R7(config-if)#glbp 47 weighting track 1 de R7(config-if)#glbp 47 weighting track 1 decrement 50 R7(config-if)#^Z R7# *Mar 1 06:19:47.606: %SYS-5-CONFIG_I: Configured from console by console R7#sh run | b trac track 1 ip route 20.10.1.0 255.255.255.0 reachability ! ! ! class-map match-all S5Other match access-group name S5 class-map match-all S5Telnet match access-group name S5 match protocol telnet class-map match-any jpg match protocol http mime "*.jpg" match protocol http mime "*.jpeg" match protocol http mime "*.jpe" match protocol http url "*.jpg" match protocol http url "*.jpe" match protocol http url "*.jpeg" ! ! policy-map Prob5 class S5Telnet bandwidth 1000 class jpg shape average 1000000 --More--   class S5Other police cir 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 speed auto --More--   half-duplex vrrp 47 ip 180.40.7.133 glbp 47 ip 180.40.7.134 glbp 47 weighting 100 lower 75 glbp 47 weighting track 1 decrement 50 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 ! interface Serial1/0 no ip address encapsulation frame-relay frame-relay class Prob6 frame-relay traffic-shaping frame-relay interface-queue priority ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay class Prob6b frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! --More--   R7#