=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2007.01.25 10:13:04 =~=~=~=~=~=~=~=~=~=~=~= RACK15AS>6 [Resuming connection 6 to r6 ... ] S6#sh mls qos map Policed-dscp map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 01 02 03 04 05 06 07 08 09 1 : 10 11 12 13 14 15 16 17 18 19 2 : 20 21 22 23 24 25 26 27 28 29 3 : 30 31 32 33 34 35 36 37 38 39 4 : 40 41 42 43 44 45 46 47 48 49 5 : 50 51 52 53 54 55 56 57 58 59 6 : 60 61 62 63 Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 01 01 1 : 01 01 01 01 01 01 02 02 02 02 2 : 02 02 02 02 03 03 03 03 03 03 3 : 03 03 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 Dscp-switch priority map: --More--   S6#confi t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#mls qos map ds S6(config)#mls qos map dscp-c S6(config)#mls qos map dscp-cos ? <0-63> DSCP values separated by spaces (up to 8 values total) S6(config)#mls qos map dscp-cos 8 9 10 11 13 150 11 13 15  11 13 15 11 13 15  11 13 15 to 0 S6(config)#mls qos map dscp-cos 8 9 11 13 15 to 0                 24 25 27 29 31 to 3 2 S6(config)#do sh mls qos map dscp-co Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 01 00 01 00 01 00 02 02 02 02 2 : 02 02 02 02 02 02 03 02 03 02 3 : 03 02 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 S6(config)#int ga 0/1 ^ % Invalid input detected at '^' marker. S6(config)#int ga 0/1 0/1 i 0/1 S6(config-if)#do sh mls qos int gi 0/1 q GigabitEthernet0/1 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 Dscp-threshold map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 01 01 01 01 01 01 01 01 01 01 1 : 01 01 01 01 01 01 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 01 01 01 01 01 01 01 01 4 : 01 01 01 01 01 01 01 01 01 01 5 : 01 01 01 01 01 01 01 01 01 01 6 : 01 01 01 01 Cos-queue map: cos-qid 0 - 1 1 - 1 2 - 2 3 - 2 4 - 3 5 - 3 6 - 4 7 - 4 S6(config-if)#wwr S6(config-if)#wwr-q S6(config-if)#wwr-q? % Unrecognized command S6(config-if)#wwr-q    rr- S6(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id dscp-map Configure dscp-map for a queue threshold queue-limit Configure queue-limit random-detect Configure random-detect threshold Configure queue tail-drop thresholds S6(config-if)#wrr-queue co S6(config-if)#wrr-queue cos-map ? <1-4> enter cos-map queue id S6(config-if)#wrr-queue cos-map 2 ? <0-7> CoS values separated by spaces (up to 8 values total) S6(config-if)#wrr-queue cos-map 2 0 4 5 6 7 S6(config-if)#wrr-queue cos-map 2 0 4 5 6 7           3 3 S6(config-if)#wrr-queue cos-map 3 3 2 0 4 5 6 7do sh mls qos int gi 0/1 q  GigabitEthernet0/1 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 Dscp-threshold map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 01 01 01 01 01 01 01 01 01 01 1 : 01 01 01 01 01 01 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 01 01 01 01 01 01 01 01 4 : 01 01 01 01 01 01 01 01 01 01 5 : 01 01 01 01 01 01 01 01 01 01 6 : 01 01 01 01 Cos-queue map: cos-qid 0 - 2 1 - 1 2 - 2 3 - 3 4 - 2 5 - 2 6 - 2 7 - 2 S6(config-if)#wrr S6(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id dscp-map Configure dscp-map for a queue threshold queue-limit Configure queue-limit random-detect Configure random-detect threshold Configure queue tail-drop thresholds S6(config-if)#wrr-queue b S6(config-if)#wrr-queue bandwidth ? <1-65536> enter bandwidth weight for qid 1 S6(config-if)#wrr-queue bandwidth 25 50 25 1 S6(config-if)# S6(config-if)#wrr S6(config-if)#wrr-queue ds S6(config-if)#wrr-queue dscp-map ? <1-2> enter dscp-map threshold id (1-2) S6(config-if)#wrr-queue dscp-map 2 ? <0-63> DSCP values separated by spaces (up to 8 values total) S6(config-if)#wrr-queue dscp-map 2 10 26 S6(config-if)#wrr S6(config-if)#wrr-queue th S6(config-if)#wrr-queue threshold ? <1-4> enter threshold queue id (1-4) S6(config-if)#wrr-queue threshold 1 ? <1-100> enter percent of queue size for threshold 1 S6(config-if)#wrr-queue threshold 1 40 ? <1-100> enter percent of queue size for threshold 2 S6(config-if)#wrr-queue threshold 1 40 100 S6(config-if)#wrr-queue threshold 1 40 100        3 60 100 S6(config-if)#wrr-queue threshold 3 60 1001 40 100dscp-map 2 10 26 bandwidth 25 50 25 1do sh mls qos int gi 0/1 q wrr-queue cos-map 3 3 do sh mls qos int gi 0/1 q GigabitEthernet0/1 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 50 3 - 25 4 - 1 Dscp-threshold map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 01 01 01 01 01 01 01 01 01 01 1 : 02 01 01 01 01 01 01 01 01 01 2 : 01 01 01 01 01 01 02 01 01 01 3 : 01 01 01 01 01 01 01 01 01 01 4 : 01 01 01 01 01 01 01 01 01 01 5 : 01 01 01 01 01 01 01 01 01 01 6 : 01 01 01 01 Cos-queue map: cos-qid 0 - 2 1 - 1 2 - 2 3 - 3 4 - 2 5 - 2 6 - 2 7 - 2 S6(config-if)# S6(config-if)#^Z S6# 1d23h: %SYS-5-CONFIG_I: Configured from console by console S6#sh run | b mls mls qos map dscp-cos 8 9 11 13 15 to 0 mls qos map dscp-cos 24 25 27 29 31 to 2 mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 no switchport ip address 20.10.2.1 255.255.255.0 --More--  ! interface FastEthernet0/2 no switchport ip address 20.10.1.2 255.255.255.0 ! interface FastEthernet0/3 switchport mode dynamic desirable ! interface FastEthernet0/4 switchport access vlan 10 switchport mode dynamic desirable mls qos cos 4 ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport mode dynamic desirable ! interface FastEthernet0/7 switchport access vlan 10 switchport mode dynamic desirable mls qos trust ip-precedence --More--  ! interface FastEthernet0/8 switchport mode dynamic desirable ! interface FastEthernet0/9 switchport mode dynamic desirable ! interface FastEthernet0/10 switchport mode dynamic desirable ! interface FastEthernet0/11 switchport mode dynamic desirable ! interface FastEthernet0/12 switchport mode dynamic desirable ! interface FastEthernet0/13 switchport mode dynamic desirable ! interface FastEthernet0/14 switchport mode dynamic desirable ! interface FastEthernet0/15 --More--   switchport mode dynamic desirable ! interface FastEthernet0/16 switchport mode dynamic desirable ! interface FastEthernet0/17 switchport mode dynamic desirable ! interface FastEthernet0/18 switchport mode dynamic desirable ! interface FastEthernet0/19 switchport mode dynamic desirable ! interface FastEthernet0/20 switchport mode dynamic desirable ! interface FastEthernet0/21 switchport mode dynamic desirable ! interface FastEthernet0/22 switchport mode dynamic desirable ! --More--  interface FastEthernet0/23 switchport mode dynamic desirable ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk ! interface GigabitEthernet0/1 switchport mode dynamic desirable wrr-queue bandwidth 25 50 25 1 wrr-queue threshold 1 40 100 wrr-queue threshold 3 60 100 wrr-queue cos-map 1 1 wrr-queue cos-map 2 0 2 4 5 6 7 wrr-queue cos-map 3 3 wrr-queue dscp-map 2 10 26 ! interface GigabitEthernet0/2 switchport mode dynamic desirable ! interface Vlan1 no ip address shutdown --More--  ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ip http server ip http secure-server ! ! ! control-plane ! ! line con 0 exec-timeout 0 0 logging synchronous line vty 0 4 privilege level 15 no login line vty 5 15 no login ! --More--   S6#confi t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#in  t gi 0/2 S6(config-if)# wrr-queue cos-map 1 1 S6(config-if)# wrr-queue cos-map 2 0 2 4 5 6 7 S6(config-if)# wrr-queue cos-map 3 3 S6(config-if)# wrr-queue bandwidth 25 50 25 1 S6(config-if)#wrr-queue dscp-map 2 26 S6(config-if)#wrr S6(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id dscp-map Configure dscp-map for a queue threshold queue-limit Configure queue-limit random-detect Configure random-detect threshold Configure queue tail-drop thresholds S6(config-if)#wrr-queue ra S6(config-if)#wrr-queue random-detect ? max-threshold max-thresholds S6(config-if)#wrr-queue random-detect m S6(config-if)#wrr-queue random-detect max-threshold ? <1-4> enter threshold queue id (1-4) S6(config-if)#wrr-queue random-detect max-threshold 3 ? <1-100> enter percent of queue size for threshold 1 S6(config-if)#wrr-queue random-detect max-threshold 3 40 ? <1-100> enter percent of queue size for threshold 2 S6(config-if)#wrr-queue random-detect max-threshold 3 40 80 ? S6(config-if)#wrr-queue random-detect max-threshold 3 40 80 S6(config-if)#^Z S6# 1d23h: %SYS-5-CONFIG_I: Configured from console by console S6#sh run int gi 0/2 Building configuration... Current configuration : 254 bytes ! interface GigabitEthernet0/2 switchport mode dynamic desirable wrr-queue bandwidth 25 50 25 1 wrr-queue random-detect max-threshold 3 40 80 wrr-queue cos-map 1 1 wrr-queue cos-map 2 0 2 4 5 6 7 wrr-queue cos-map 3 3 wrr-queue dscp-map 2 26 end S6# RACK15AS>7 [Resuming connection 7 to r7 ... ] R7#sh class Class Map match-all S5Other (id 2) Match access-group name S5 Class Map match-any class-default (id 0) Match any Class Map match-all S5Telnet (id 1) Match access-group name S5 Match protocol telnet Class Map match-any jpg (id 3) Match protocol http mime "*.jpg" Match protocol http mime "*.jpeg" Match protocol http mime "*.jpe" Match protocol http url "*.jpg" Match protocol http url "*.jpe" Match protocol http url "*.jpeg" R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#ip nab  bar po R7(config)#ip nbar port-map ftp tcp 20 21 R7(config)#class   R7(config)#class-map ftp R7(config-cmap)#match pro R7(config-cmap)#match protocol ftp R7(config-cmap)#match protocol ftpclass-map ftp    telnet R7(config-cmap)#class-map telnetmatch protocol ftp   telnet R7(config-cmap)#exit R7(config)#pol R7(config)#policy-map Prob20to22 R7(config-pmap)#class R7(config-pmap)#class ftp R7(config-pmap-c)#ba R7(config-pmap-c)#bandwidth p R7(config-pmap-c)#bandwidth percent 25 R7(config-pmap-c)#bandwidth percent 25 bandwidth percent 25class ftp    telnet R7(config-pmap-c)#class telnetbandwidth percent 25 R7(config-pmap-c)#exi R7(config-pmap)#class class-default R7(config-pmap-c)#class class-defaultexi bandwidth percent 25  50 R7(config-pmap-c)#int fa 0/0 R7(config-if)#serv out Prob20to22 I/f FastEthernet0/0 class class-default requested bandwidth 50%, available only 25% R7(config-if)#max R7(config-if)#max-reserved-bandwidth 100 R7(config-if)#max-reserved-bandwidth 100serv out Prob20to22  R7(config-if)#^Z R7#sh r *Mar 1 20:02:11.662: %SYS-5-CONFIG_I: Configured from console by console R7#sh run | b class class-map match-all telnet match protocol telnet class-map match-all S5Other match access-group name S5 class-map match-all S5Telnet match access-group name S5 match protocol telnet class-map match-all ftp match protocol ftp class-map match-any jpg match protocol http mime "*.jpg" match protocol http mime "*.jpeg" match protocol http mime "*.jpe" match protocol http url "*.jpg" match protocol http url "*.jpe" match protocol http url "*.jpeg" ! ! policy-map Prob5 class S5Telnet bandwidth 1000 class jpg shape average 1000000 --More--   class S5Other --More--   police cir 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob20to22 class ftp bandwidth percent 25 class telnet bandwidth percent 25 class class-default bandwidth percent 50 ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex max-reserved-bandwidth 100 service-policy output Prob20to22 ! --More--   R7#CONFI T Enter configuration commands, one per line. End with CNTL/Z. R7(config)#ip access-list ex R7(config)#ip access-list extended Prob2122 R7(config-ext-nacl)#per ip any host 87.23.11.123 R7(config-ext-nacl)#per ip any host 87.23.11.123 any host 87.23.11.123 any  host 87.23.11.123 any  host 87.23.11.123 any host 87.23.11.123 any  R7(config-ext-nacl)#exit R7(config)#clas R7(config)#class-map sql R7(config-cmap)#match ip a    acc R7(config-cmap)#match access-group name Prob2122 R7(config-cmap)#match pro R7(config-cmap)#match protocol ? aarp AppleTalk ARP appletalk AppleTalk arp IP ARP bgp Border Gateway Protocol bridge Bridging bstun Block Serial Tunnel cdp Cisco Discovery Protocol citrix Citrix Traffic clns ISO CLNS clns_es ISO CLNS End System clns_is ISO CLNS Intermediate System cmns ISO CMNS compressedtcp Compressed TCP cuseeme CU-SeeMe desktop video conference custom-01 Custom protocol custom-01 custom-02 Custom protocol custom-02 custom-03 Custom protocol custom-03 custom-04 Custom protocol custom-04 custom-05 Custom protocol custom-05 custom-06 Custom protocol custom-06 custom-07 Custom protocol custom-07 custom-08 Custom protocol custom-08 --More--   custom-09 Custom protocol custom-09 custom-10 Custom protocol custom-10 decnet DECnet decnet_node DECnet Node decnet_router-l1 DECnet Router L1 decnet_router-l2 DECnet Router L2 dhcp Dynamic Host Configuration dlsw Data Link Switching (Direct encapsulation only) dns Domain Name Server lookup egp Exterior Gateway Protocol eigrp Enhanced Interior Gateway Routing Protocol exchange MS-RPC for Exchange fasttrack FastTrack Traffic - KaZaA, Morpheus, Grokster... finger Finger ftp File Transfer Protocol gnutella Gnutella Traffic - BearShare,LimeWire,Gnotella... gopher Gopher gre Generic Routing Encapsulation http World Wide Web traffic icmp Internet Control Message imap Internet Message Access Protocol ip IP ipinip IP in IP (encapsulation) --More--   ipsec IP Security Protocol (ESP/AH) ipv6 IPV6 ipx Novell IPX irc Internet Relay Chat kazaa2 Kazaa Version 2 kerberos Kerberos l2tp L2F/L2TP tunnel ldap Lightweight Directory Access Protocol llc2 llc2 napster Napster Traffic netbios NetBIOS netshow Microsoft Netshow nfs Network File System nntp Network News Transfer Protocol notes Lotus Notes(R) novadigm Novadigm EDM ntp Network Time Protocol pad PAD links pcanywhere Symantec pcANYWHERE pop3 Post Office Protocol pppoe PPP over Ethernet pptp Point-to-Point Tunneling Protocol printer print spooler/lpd --More--   qllc qllc protocol rcmd BSD r-commands (rsh, rlogin, rexec) rip Routing Information Protocol rsrb Remote Source-Route Bridging rsvp Resource Reservation Protocol rtp Real Time Protocol rtspplayer RTSP players streaming protocol secure-ftp FTP over TLS/SSL secure-http Secured HTTP secure-imap Internet Message Access Protocol over TLS/SSL secure-irc Internet Relay Chat over TLS/SSL secure-ldap Lightweight Directory Access Protocol over TLS/SSL secure-nntp Network News Transfer Protocol over TLS/SSL secure-pop3 Post Office Protocol over TLS/SSL secure-telnet Telnet over TLS/SSL smtp Simple Mail Transfer Protocol snapshot Snapshot routing support snmp Simple Network Management Protocol socks SOCKS sqlnet SQL*NET for Oracle sqlserver MS SQL Server ssh Secured Shell streamwork Xing Technology StreamWorks player --More--   R7(config-cmap)#match protocol                match access-group name Prob2122class-map sql match access-group name Prob2122nmatch access-group name Prob2122omatch access-group name Prob2122 match access-group name Prob2122 R7(config-cmap)#match pro R7(config-cmap)#match protocol sq R7(config-cmap)#match protocol sqls R7(config-cmap)#match protocol sqlserver R7(config-cmap)#match protocol sqlserver       n  R7(config-cmap)#match protocol sqln   R7(config-cmap)#match protocol sqlnet R7(config-cmap)#exit R7(config)#exitmatch protocol sqlnet server no match access-group name Prob2122match access-group name Prob2122 class-map sql msqlasqltsqlcsqlhsql-sqlasqlnsqlysql sql R7(config-cmap)#exit R7(config)#clas R7(config)#class-map sqlserver R7(config-cmap)#match acc R7(config-cmap)#match access-group Prob2122 ^ % Invalid input detected at '^' marker. R7(config-cmap)#match access-group Prob2122nProb2122aProb2122mProb2122eProb2122 Prob2122 R7(config-cmap)#match class sql R7(config-cmap)#exit R7(config)#pol R7(config)#policy-map Prob20to22 R7(config-pmap)#class sqlserver R7(config-pmap-c)#pri R7(config-pmap-c)#priority ? <8-2000000> Kilo Bits per second percent % of total bandwidth R7(config-pmap-c)#priority 56 ? <32-2000000> Burst in bytes R7(config-pmap-c)#priority 56 128 I/f FastEthernet0/0 class sqlserver requested bandwidth 56 (kbps), available only 0 (kbps) R7(config-pmap-c)#exit R7(config-pmap)#policy-map Prob20to22                     exit R7(config)#no policy-map Prob20to22 R7(config)#policy-map Prob20to22 R7(config-pmap)#class sqlserver R7(config-pmap-c)#pri 56 128 R7(config-pmap-c)# class ftp R7(config-pmap-c)# bandwidth rem percent 25 R7(config-pmap-c)# class telnet R7(config-pmap-c)# bandwidth rem percent 25 R7(config-pmap-c)# class class-default R7(config-pmap-c)# bandwidth rem percent 50 R7(config-pmap-c)#int fa 0/0 R7(config-if)#do sj   h run int fa 0/0 Building configuration... Current configuration : 123 bytes ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex max-reserved-bandwidth 100 end R7(config-if)#service-policy output Prob20to22 R7(config-if)#^Z R7#sh run | *Mar 1 20:12:22.997: %SYS-5-CONFIG_I: Configured from console by console R7#sh run | b pol policy-map Prob5 class S5Telnet bandwidth 1000 class jpg shape average 1000000 class S5Other police cir 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob20to22 class sqlserver priority 56 128 class ftp bandwidth remaining percent 25 class telnet bandwidth remaining percent 25 class class-default bandwidth remaining percent 50 ! ! ! ! ! --More--   R7#sh run | b pol   class class-map match-all telnet match protocol telnet class-map match-all S5Other match access-group name S5 class-map match-all S5Telnet match access-group name S5 match protocol telnet class-map match-all ftp match protocol ftp class-map match-any sql match protocol sqlserver match protocol sqlnet class-map match-all sqlserver match access-group name Prob2122 match class-map sql class-map match-any jpg match protocol http mime "*.jpg" match protocol http mime "*.jpeg" match protocol http mime "*.jpe" match protocol http url "*.jpg" match protocol http url "*.jpe" match protocol http url "*.jpeg" ! --More--  ! policy-map Prob5 class S5Telnet bandwidth 1000 class jpg shape average 1000000 class S5Other police cir 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob20to22 class sqlserver priority 56 128 class ftp bandwidth remaining percent 25 class telnet bandwidth remaining percent 25 class class-default bandwidth remaining percent 50 ! ! ! ! --More--   R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#pol R7(config)#policy-map Prob20to22 R7(config-pmap)#class class-f default R7(config-pmap-c)#fa R7(config-pmap-c)#fair-queue ? <16-4096> Number Dynamic Conversation Queues R7(config-pmap-c)#fair-queue deconfigure bandwidth before issuing this command in this class R7(config-pmap-c)#no bandwidth remaining percent 50 R7(config-pmap-c)#no bandwidth remaining percent 50fair-queue  R7(config-pmap-c)#do sh pol int fa 0/0 FastEthernet0/0 Service-policy output: Prob20to22 Class-map: sqlserver (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Prob2122 Match: class-map match-any sql Match: protocol sqlserver 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol sqlnet 0 packets, 0 bytes 5 minute rate 0 bps Queueing Strict Priority Output Queue: Conversation 264 Bandwidth 56 (kbps) Burst 128 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: ftp (match-all) --More--   0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp Queueing Output Queue: Conversation 265 Bandwidth remaining 25 (%) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Queueing Output Queue: Conversation 266 Bandwidth remaining 25 (%) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: class-default (match-any) 43 packets, 4262 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any --More--   Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 256 (total queued/total drops/no-buffer drops) 0/0/0 R7(config-pmap-c)#qdo sh pol int fa 0/0fair-queue 512 R7(config-pmap-c)#^Z R7# *Mar 1 20:15:43.393: %SYS-5-CONFIG_I: Configured from console by console R7#sh pol int fa 0/0 FastEthernet0/0 Service-policy output: Prob20to22 Class-map: sqlserver (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Prob2122 Match: class-map match-any sql Match: protocol sqlserver 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol sqlnet 0 packets, 0 bytes 5 minute rate 0 bps Queueing Strict Priority Output Queue: Conversation 520 Bandwidth 56 (kbps) Burst 128 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: ftp (match-all) --More--   0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp Queueing Output Queue: Conversation 521 Bandwidth remaining 25 (%) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Queueing Output Queue: Conversation 522 Bandwidth remaining 25 (%) Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: class-default (match-any) 48 packets, 4953 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any --More--   Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 512 (total queued/total drops/no-buffer drops) 0/0/0 R7#sh run | b pol policy-map Prob5 class S5Telnet bandwidth 1000 class jpg shape average 1000000 class S5Other police cir 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob20to22 class sqlserver priority 56 128 class ftp bandwidth remaining percent 25 class telnet bandwidth remaining percent 25 class class-default fair-queue 512 ! ! ! ! ! --More--   R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#pol R7(config)#policy-map Prob22 324 R7(config-pmap)#class ftp R7(config-pmap-c)#pol R7(config-pmap-c)#police ? <8000-2000000000> Bits per second cir Committed information rate R7(config-pmap-c)#police 256000 ? <1000-512000000> Burst bytes bc Conform burst conform-action action when rate is less than conform burst pir Peak Information Rate R7(config-pmap-c)#police 256000 R7(config-pmap-c-police)#do sh pol Policy Map Prob5 Class S5Telnet Bandwidth 1000 (kbps) Max Threshold 64 (packets) Class jpg Traffic Shaping Average Rate Traffic Shaping CIR 1000000 (bps) Max. Buffers Limit 1000 (Packets) Class S5Other police cir 5000000 bc 156250 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 Policy Map Prob2324 Class ftp police cir 256000 bc 8000 conform-action transmit exceed-action drop Policy Map Prob20to22 Class sqlserver Strict Priority Bandwidth 56 (kbps) Burst 128 (Bytes) Class ftp --More--   Bandwidth remaining 25 (%) Max Threshold 64 (packets) Class telnet Bandwidth remaining 25 (%) Max Threshold 64 (packets) Class class-default Flow based Fair Queueing Bandwidth 0 (kbps) Max Threshold 64 (packets) R7(config-pmap-c-police)#exit R7(config-pmap-c)#class R7(config-pmap-c)#class     exit R7(config-pmap)#class telnet R7(config-pmap-c)#pol R7(config-pmap-c)#police 56  000 ? <1000-512000000> Burst bytes bc Conform burst conform-action action when rate is less than conform burst pir Peak Information Rate R7(config-pmap-c)#police 56000 1400 ? <1000-512000000> Burst bytes be Excess burst conform-action action when rate is less than conform burst pir Peak Information Rate R7(config-pmap-c)#police 56000 1400 3500 ? conform-action action when rate is less than conform burst R7(config-pmap-c)#police 56000 1400 3500 con R7(config-pmap-c)#police 56000 1400 3500 conform-action ? drop drop packet exceed-action action when rate is within conform and conform + exceed burst set-clp-transmit set atm clp and send it set-discard-class-transmit set discard-class and send it set-dscp-transmit set dscp and send it set-frde-transmit set FR DE and send it set-mpls-exp-imposition-transmit set exp at tag imposition and send it set-mpls-exp-topmost-transmit set exp on topmost label and send it set-prec-transmit rewrite packet precedence and send it set-qos-transmit set qos-group and send it transmit transmit packet R7(config-pmap-c)#police 56000 1400 3500 conform-action s R7(config-pmap-c)#police 56000 1400 3500 conform-action set-? set-clp-transmit set-discard-class-transmit set-dscp-transmit set-frde-transmit set-mpls-exp-imposition-transmitset-mpls-exp-topmost-transmit set-prec-transmit set-qos-transmit R7(config-pmap-c)#police 56000 1400 3500 conform-action set-p R7(config-pmap-c)#police 56000 1400 3500 conform-action set-prec-transmit ? <0-7> new precedence R7(config-pmap-c)#police 56000 1400 3500 conform-action set-prec-transmit                                                         exit R7(config-pmap)#exit R7(config)#class test ^ % Invalid input detected at '^' marker. R7(config)#class test\        R7(config)#class-map test R7(config-cmap)#match ip pre R7(config-cmap)#match ip precedence ? <0-7> Enter up to 4 precedence values separated by white-spaces critical Match packets with critical precedence (5) flash Match packets with flash precedence (3) flash-override Match packets with flash override precedence (4) immediate Match packets with immediate precedence (2) internet Match packets with internetwork control precedence (6) network Match packets with network control precedence (7) priority Match packets with priority precedence (1) routine Match packets with routine precedence (0) R7(config-cmap)#match ip precedence                     exit R7(config)#exitclass-map testnclass-map testoclass-map test class-map test R7(config)#no class-map testexit class-map test test exit class telnetexit do sh polpolice 256000 class ftp policy-map Prob2324 R7(config-pmap)#class telnet R7(config-pmap-c)#pol R7(config-pmap-c)#police 56000 1400 355 00 con R7(config-pmap-c)#police 56000 1400 3500 conform-action s R7(config-pmap-c)#police 56000 1400 3500 conform-action set-p R7(config-pmap-c)#police 56000 1400 3500 conform-action set-prec-transmit 1 e R7(config-pmap-c)#$0 conform-action set-prec-transmit 1 exceed-action s R7(config-pmap-c)#$0 conform-action set-prec-transmit 1 exceed-action set-p R7(config-pmap-c)#$-prec-transmit 1 exceed-action set-prec-transmit 0 R7(config-pmap-c-police)#do sh pol Policy Map Prob5 Class S5Telnet Bandwidth 1000 (kbps) Max Threshold 64 (packets) Class jpg Traffic Shaping Average Rate Traffic Shaping CIR 1000000 (bps) Max. Buffers Limit 1000 (Packets) Class S5Other police cir 5000000 bc 156250 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 Policy Map Prob2324 Class ftp police cir 256000 bc 8000 conform-action transmit exceed-action drop Class telnet police cir 56000 bc 1400 be 3500 conform-action set-prec-transmit 1 exceed-action set-prec-transmit 0 Policy Map Prob20to22 --More--   R7(config-pmap-c-police)#v R7(config-pmap-c-police)#violate-action d R7(config-pmap-c-police)#violate-action drop R7(config-pmap-c-police)#violate-action drop do sh pol  Policy Map Prob5 Class S5Telnet Bandwidth 1000 (kbps) Max Threshold 64 (packets) Class jpg Traffic Shaping Average Rate Traffic Shaping CIR 1000000 (bps) Max. Buffers Limit 1000 (Packets) Class S5Other police cir 5000000 bc 156250 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 Policy Map Prob2324 Class ftp police cir 256000 bc 8000 conform-action transmit exceed-action drop Class telnet police cir 56000 bc 1400 be 3500 conform-action set-prec-transmit 1 exceed-action set-prec-transmit 0 violate-action drop --More--   R7(config-pmap-c-police)#exi R7(config-pmap-c)#exi R7(config-pmap)#class class-default R7(config-pmap-c)#fa R7(config-pmap-c)#fair-queue R7(config-pmap-c)#q R7(config-pmap-c)#queue-limit ? <1-4096> Packets R7(config-pmap-c)#queue-limit 100 R7(config-pmap-c)#int s 1/0.1 R7(config-subif)#ser R7(config-subif)#service-policy ou R7(config-subif)#service-policy output Prob2324 CBWFQ : Not supported on subinterfaces R7(config-subif)#exit R7(config)#map R7(config)#map-c R7(config)#map-class fr R7(config)#map-class frame-relay Prob2324 R7(config-map-class)#ser R7(config-map-class)#service-policy ? input input policy output output policy R7(config-map-class)#service-policy out ? WORD policy name R7(config-map-class)#service-policy out Prob2324 R7(config-map-class)#int s 1/0.1 R7(config-subif)#c fram class Prob2324 R7(config-subif)#do sh pol int s 1/0.1 Serial1/0.1: DLCI 703 - Service-policy output: Prob2324 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp police: cir 256000 bps, bc 8000 bytes conformed 0 packets, 0 bytes; actions: transmit exceeded 0 packets, 0 bytes; actions: drop conformed 0 bps, exceed 0 bps Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet police: cir 56000 bps, bc 1400 bytes, be 3500 bytes conformed 0 packets, 0 bytes; actions: --More--   set-prec-transmit 1 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 0 violated 0 packets, 0 bytes; actions: drop conformed 0 bps, exceed 0 bps, violate 0 bps Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 16 (total queued/total drops/no-buffer drops) 0/0/0 R7(config-subif)#do shj    run int s 1/0 Building configuration... Current configuration : 161 bytes ! interface Serial1/0 no ip address encapsulation frame-relay frame-relay class Prob6 frame-relay traffic-shaping frame-relay interface-queue priority end R7(config-subif)#u int s 1/0 R7(config-if)#no frame-relay traffic-shaping R7(config-if)#no frame-relay traffic-shapingint s 1/0 do sh run int s 1/0pol int s 1/0.1run int s 1/0 pol int s 1/0.1 R7(config-if)#fram traff R7(config-if)#fram traffic-shaping R7(config-if)#fram traffic-shaping do sh pol int s 1/0.1 Serial1/0.1: DLCI 703 - Service-policy output: Prob2324 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp police: cir 256000 bps, bc 8000 bytes conformed 0 packets, 0 bytes; actions: transmit exceeded 0 packets, 0 bytes; actions: drop conformed 0 bps, exceed 0 bps Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet police: cir 56000 bps, bc 1400 bytes, be 3500 bytes conformed 0 packets, 0 bytes; actions: --More--   set-prec-transmit 1 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 0 violated 0 packets, 0 bytes; actions: drop conformed 0 bps, exceed 0 bps, violate 0 bps Class-map: class-default (match-any) 1 packets, 80 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 16 (total queued/total drops/no-buffer drops) 0/0/0 R7(config-if)#^Z R7#sh run | b *Mar 1 20:27:21.646: %SYS-5-CONFIG_I: Configured from console by console R7#sh run | b class                confi t confi t sh int s 1/0.1 Serial1/0.1 is up, line protocol is up Hardware is CD2430 in sync mode Internet address is 180.40.7.65/27 MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 1/0.1 R7(config-subif)#fra   end R7# *Mar 1 20:28:19.236: %SYS-5-CONFIG_I: Configured from console by console R7#sh run | b class class-map match-all telnet match protocol telnet class-map match-all S5Other match access-group name S5 class-map match-all S5Telnet match access-group name S5 match protocol telnet class-map match-all ftp match protocol ftp class-map match-any sql match protocol sqlserver match protocol sqlnet class-map match-all sqlserver match access-group name Prob2122 match class-map sql class-map match-any jpg match protocol http mime "*.jpg" match protocol http mime "*.jpeg" match protocol http mime "*.jpe" match protocol http url "*.jpg" match protocol http url "*.jpe" match protocol http url "*.jpeg" ! --More--  ! policy-map Prob5 class S5Telnet bandwidth 1000 class jpg shape average 1000000 class S5Other police cir 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob2324 class ftp police 256000 class telnet police cir 56000 bc 1400 be 3500 conform-action set-prec-transmit 1 exceed-action set-prec-transmit 0 violate-action drop class class-default fair-queue queue-limit 100 policy-map Prob20to22 class sqlserver --More--   priority 56 128 class ftp bandwidth remaining percent 25 class telnet bandwidth remaining percent 25 class class-default fair-queue 512 ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex max-reserved-bandwidth 100 service-policy output Prob20to22 ! interface BRI0/0 no ip address shutdown --More--  ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 speed auto half-duplex vrrp 47 ip 180.40.7.133 glbp 47 ip 180.40.7.134 glbp 47 weighting 100 lower 75 glbp 47 weighting track 1 decrement 50 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 ! interface Serial1/0 no ip address encapsulation frame-relay frame-relay class Prob6 frame-relay traffic-shaping frame-relay interface-queue priority ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 --More--   ip ospf network point-to-multipoint frame-relay class Prob2324 frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay interface-dlci 702 protocol ip 180.40.7.162 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 no ip address shutdown ! interface Serial1/3 no ip address shutdown ! --More--   R7#sh run | b map-class map-class frame-relay Prob6 frame-relay priority-group 1 ! map-class frame-relay Prob6b ! map-class frame-relay Prob2324 service-policy output Prob2324 priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 --More--   R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int     pol R7(config)#policy-map Prob2324 R7(config-pmap)#class R7(config-pmap)#class class-default R7(config-pmap-c)#no fair R7(config-pmap-c)#no fair-queue R7(config-pmap-c)#ba R7(config-pmap-c)#bandwidth ? <8-2000000> Kilo Bits per second percent % of total Bandwidth remaining % of the remaining bandwidth R7(config-pmap-c)#bandwidth 512 I/f Serial1/0.1 DLCI 703 class class-default requested bandwidth 512 (kbps), available only 28 (kbps) R7(config-pmap-c)#do sh f traff Interface Se1/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 701 56000 875 7000 0 125 875 - Interface Se1/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 703 56000 875 7000 0 125 875 - Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 702 56000 875 7000 0 125 875 - R7(config-pmap-c)#map  -class fram Prob2324 R7(config-map-class)#fram cir 60    ? <1-45000000> Applied to both Incoming/Outgoing CIR, Bits per second in Incoming CIR out Outgoing CIR R7(config-map-class)#fram cir 600000 R7(config-map-class)#fram R7(config-map-class)#frame-relay m R7(config-map-class)#frame-relay mincir 600000 R7(config-map-class)#frame-relay mincir 600000 cir 600000 map-class fram Prob2324do sh traff bandwidth 512no fair-queue class class-defaultpolicy-map Prob2324 R7(config-pmap)#policy-map Prob2324frame-relay mincir 600000 cir 600000 map-class fram Prob2324do sh traff bandwidth 512no fair-queue class class-default R7(config-pmap-c)#class class-defaultpolicy-map Prob2324frame-relay mincir 600000 cir 600000 map-class fram Prob2324do sh traff bandwidth 512 R7(config-pmap-c)#^Z R7# *Mar 1 20:36:10.829: %SYS-5-CONFIG_I: Configured from console by console R7#sh traff Interface Se1/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 701 56000 875 7000 0 125 875 - Interface Se1/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 703 600000 9375 600000 0 125 9375 - Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 702 56000 875 7000 0 125 875 - R7#sh run | b pol policy-map Prob5 class S5Telnet bandwidth 1000 class jpg shape average 1000000 class S5Other police cir 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob2324 class ftp police 256000 class telnet police cir 56000 bc 1400 be 3500 conform-action set-prec-transmit 1 exceed-action set-prec-transmit 0 violate-action drop class class-default bandwidth 512 policy-map Prob20to22 class sqlserver priority 56 128 class ftp --More--   bandwidth remaining percent 25 --More--   class telnet bandwidth remaining percent 25 class class-default fair-queue 512 ! ! ! ! ! ! interface FastEthernet0/0 ip address 208.28.1.1 255.255.255.0 speed auto half-duplex max-reserved-bandwidth 100 service-policy output Prob20to22 ! interface BRI0/0 no ip address shutdown ! interface FastEthernet0/1 ip address 180.40.7.131 255.255.255.224 --More--   ip helper-address 180.40.7.66 speed auto half-duplex vrrp 47 ip 180.40.7.133 glbp 47 ip 180.40.7.134 glbp 47 weighting 100 lower 75 glbp 47 weighting track 1 decrement 50 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 ! interface Serial1/0 no ip address encapsulation frame-relay frame-relay class Prob6 frame-relay traffic-shaping frame-relay interface-queue priority ! interface Serial1/0.1 point-to-point ip address 180.40.7.65 255.255.255.224 ip ospf network point-to-multipoint frame-relay class Prob2324 frame-relay interface-dlci 703 --More--   frame-relay ip tcp header-compression passive ! interface Serial1/0.2 point-to-point ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay interface-dlci 702 protocol ip 180.40.7.162 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 no ip address shutdown ! interface Serial1/3 no ip address shutdown ! interface Serial1/4 no ip address shutdown --More--  ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ! no ip http server no ip http secure-server ! ip access-list standard S5 --More--   permit 208.28.1.2 ! ip access-list extended Prob2122 permit ip any host 87.23.11.123 permit ip host 87.23.11.123 any ! ! map-class frame-relay Prob6 frame-relay priority-group 1 ! map-class frame-relay Prob6b ! map-class frame-relay Prob2324 frame-relay cir 600000 frame-relay mincir 600000 service-policy output Prob2324 priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! ! ! ! --More--   R7# RACK15AS>2 [Resuming connection 2 to r2 ... ] *M R2#sh run | int s 1/0.2 Building configuration... Current configuration : 199 bytes ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay de-group 1 207 frame-relay interface-dlci 207 class Prob3 end R2#sh traff Interface Se1/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 201 56000 875 7000 0 125 875 - Interface Se1/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 203 56000 875 7000 0 125 875 - Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 207 64000 5000 64000 32000 125 1000 BECN R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#map R2(config)#map-c R2(config)#map-class fra R2(config)#map-class frame-relay Prob2526 R2(config-map-class)#fra R2(config-map-class)#frame-relay cir R2(config-map-class)#frame-relay cir 64000 R2(config-map-class)#fra R2(config-map-class)#frame-relay ad R2(config-map-class)#frame-relay adaptive-shaping b R2(config-map-class)#frame-relay adaptive-shaping becn R2(config-map-class)#int s 1/0.2 R2(config-subif)#fra   R2(config-subif)#fram R2(config-subif)#frame-relay cl R2(config-subif)#frame-relay class Prob2526 R2(config-subif)#^Z R2#confi tsh traff *Mar 2 23:56:42.895: %SYS-5-CONFIG_I: Configured from console by console R2#sh traff Interface Se1/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 201 56000 875 7000 0 125 875 - Interface Se1/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 203 56000 875 7000 0 125 875 - Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 207 64000 5000 64000 32000 125 1000 BECN R2# sh confi t ^ % Invalid input detected at '^' marker. R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 1/0.2 R2(config-subif)#int s 1/0.2frame-relay class Prob2526nframe-relay class Prob2526oframe-relay class Prob2526 frame-relay class Prob2526 R2(config-subif)#frame-relay interface-dlci 207 R2(config-fr-dlci)# class Prob3 R2(config-fr-dlci)#int s 1/2 0.1 R2(config-subif)#int s 1/0.1 class Prob3frame-relay interface-dlci 207no frame-relay class Prob2526 no frame-relay class Prob2526  frame-relay class Prob2526  R2(config-subif)#^Z R2#confi t sh confi t ^ % Invalid input detected at '^' marker. R2# *Mar 2 23:57:27.187: %SYS-5-CONFIG_I: Configured from console by console R2# sh confi tconfi t  sh confi tsh traff  Interface Se1/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 201 56000 875 7000 0 125 875 - Interface Se1/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 203 64000 1000 64000 0 125 1000 BECN Interface Se1/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 207 64000 5000 64000 32000 125 1000 BECN R2#sh run | b 1/0.1 interface Serial1/0.1 point-to-point ip address 180.40.7.67 255.255.255.224 ip ospf network broadcast frame-relay class Prob2526 frame-relay interface-dlci 203 ! interface Serial1/0.2 point-to-point ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay de-group 1 207 frame-relay interface-dlci 207 class Prob3 ! interface Serial1/1 no ip address shutdown ! interface Serial1/2 ip address 180.40.7.2 255.255.255.224 clock rate 64000 ! interface Serial1/3 no ip address --More--   shutdown ! interface Serial1/4 no ip address shutdown ! interface Serial1/5 no ip address shutdown ! interface Serial1/6 no ip address shutdown ! interface Serial1/7 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless --More--  ! no ip http server no ip http secure-server ! ! map-class frame-relay Prob3 frame-relay cir 64000 frame-relay bc 64000 frame-relay be 32000 frame-relay adaptive-shaping becn ! map-class frame-relay Prob2526 frame-relay cir 64000 frame-relay adaptive-shaping becn access-list 100 deny ospf any any access-list 100 permit ip any any ! ! ! ! ! ! ! --More--   R2#