=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2007.03.15 09:36:05 =~=~=~=~=~=~=~=~=~=~=~= conf t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#class notused ^ % Invalid input detected at '^' marker. R7(config)#class notused          R7(config)#class-map notuser d R7(config-cmap)#match pre R7(config-cmap)#match precedence ? <0-7> Enter up to 4 precedence values separated by white-spaces critical Match packets with critical precedence (5) flash Match packets with flash precedence (3) flash-override Match packets with flash override precedence (4) immediate Match packets with immediate precedence (2) internet Match packets with internetwork control precedence (6) network Match packets with network control precedence (7) priority Match packets with priority precedence (1) routine Match packets with routine precedence (0) R7(config-cmap)#match precedence                  ^Z R7# RACK1AS>3 [Resuming connection 3 to r3 ... ] R3# R3#conf t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#ip dhcp Prob15 ^ % Invalid input detected at '^' marker. R3(config)#ip dhcp Prob15pProb15oProb15oProb15 Prob15Prob15 ;Prob15Prob15  Prob15 R3(dhcp-config)#net R3(dhcp-config)#netw R3(dhcp-config)#network 1870  0.40.7.128 /27 R3(dhcp-config)#def R3(dhcp-config)#default-router 180.40.7.132 R3(dhcp-config)#default-router 180.40.7.132 ? Hostname or A.B.C.D Router's name or IP address R3(dhcp-config)#default-router 180.40.7.132                             dom R3(dhcp-config)#domain-name ? WORD Domain name R3(dhcp-config)#domain-name cciestudent.com R3(dhcp-config)#dn R3(dhcp-config)#dns-server ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#dns-server 208.28.1.82 ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#dns-server 208.28.1.82 R3(dhcp-config)#? DHCP pool configuration commands: accounting Send Accounting Start/Stop messages bootfile Boot file name class Specify a DHCP class client-identifier Client identifier client-name Client name default-router Default routers dns-server DNS servers domain-name Domain name exit Exit from DHCP pool configuration mode hardware-address Client hardware address host Client IP address and mask import Programatically importing DHCP option parameters lease Address lease time netbios-name-server NetBIOS (WINS) name servers netbios-node-type NetBIOS node type network Network number and mask next-server Next server in boot process no Negate a command or set its defaults option Raw DHCP options origin Configure the origin of the pool relay Function as a DHCP relay --More--   subnet Subnet allocation commands update Dynamic updates utilization Configure various utilization parameters vrf Associate this pool with a VRF R3(dhcp-config)#op R3(dhcp-config)#option ? <0-254> DHCP option code R3(dhcp-config)#option 150 ? ascii Data is an NVT ASCII string hex Data is a hexadecimal string instance Specify the option instance ip Data is one or more IP addresses R3(dhcp-config)#option 150 ip ? Hostname or A.B.C.D Server's name or IP address R3(dhcp-config)#option 150 ip 20.20.20.20 R3(dhcp-config)#^Z R3# RACK1AS>4 [Resuming connection 4 to r2 ... ] R4#conf t Enter configuration commands, one per line. End with CNTL/Z. R4(config)#do deb i dhcp de DHCP client activity debugging is on (detailed) R4(config)#int fa 0/1 R4(config-if)#ip    do sh       do sh run int fa 0/1 Building configuration... Current configuration : 129 bytes ! interface FastEthernet0/1 ip address 180.40.7.130 255.255.255.224 duplex auto speed auto service-policy output Prob10 end R4(config-if)#ip add dhcp R4(config-if)# *Mar 2 22:05:03.962: DHCP: DHCP client process started: 10 *Mar 2 22:05:03.966: RAC: Starting DHCP discover on FastEthernet0/1 *Mar 2 22:05:03.966: DHCP: Try 1 to acquire address for FastEthernet0/1 R4(config-if)# *Mar 2 22:05:03.970: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/1 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 2 22:05:03.970: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.161 on FastEthernet0/1 from FULL to DOWN, Neighbor Down: Interface down or detached R4(config-if)# *Mar 2 22:05:09.018: DHCP: allocate request *Mar 2 22:05:09.018: DHCP: new entry. add to queue, interface FastEthernet0/1 *Mar 2 22:05:09.018: DHCP: SDiscover attempt # 1 for entry: *Mar 2 22:05:09.018: Temp IP addr: 0.0.0.0 for peer on Interface: FastEthernet0/1 *Mar 2 22:05:09.018: Temp sub net mask: 0.0.0.0 *Mar 2 22:05:09.018: DHCP Lease server: 0.0.0.0, state: 1 Selecting *Mar 2 22:05:09.018: DHCP transaction id: 18C4 *Mar 2 22:05:09.018: Lease: 0 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 22:05:09.022: Next timer fires after: 00:00:04 *Mar 2 22:05:09.022: Retry count: 1 Client-ID: cisco-0012.7f80.f4c1-Fa0/1 R4(config-if)# *Mar 2 22:05:09.022: Client-ID hex dump: 636973636F2D303031322E376638302E *Mar 2 22:05:09.022: 663463312D4661302F31 *Mar 2 22:05:09.026: Hostname: R4 *Mar 2 22:05:09.026: DHCP: SDiscover: sending 291 byte length DHCP packet *Mar 2 22:05:09.026: DHCP: SDiscover 291 bytes *Mar 2 22:05:09.026: B'cast on FastEthernet0/1 interface from 0.0.0.0 *Mar 2 22:05:09.030: DHCP: Shutting down from get_netinfo() *Mar 2 22:05:09.030: DHCP: Attempting to shutdown DHCP Client R4(config-if)# *Mar 2 22:05:11.030: DHCP: Received a BOOTREP pkt *Mar 2 22:05:11.030: DHCP: Scan: Message type: DHCP Offer *Mar 2 22:05:11.030: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 22:05:11.030: DHCP: Scan: Lease Time: 86400 *Mar 2 22:05:11.030: DHCP: Scan: Renewal time: 43200 *Mar 2 22:05:11.030: DHCP: Scan: Rebind time: 75600 *Mar 2 22:05:11.030: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 22:05:11.034: DHCP: Scan: Router Option: 180.40.7.132 *Mar 2 22:05:11.034: DHCP: Scan: Domain Name: cciestudent.com *Mar 2 22:05:11.034: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 22:05:11.034: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 22:05:11.034: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 22:05:11.034: UDP sport: 43, dport: 44, length: 317 *Mar 2 22:05:11.034: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 22:05:11.034: DHCP server identifier: 180.40.7.129 *Mar 2 22:05 R4(config-if)#:11.038: xid: 18C4, secs: 0, flags: 8000 *Mar 2 22:05:11.038: client: 0.0.0.0, your: 180.40.7.130 *Mar 2 22:05:11.038: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 22:05:11.038: options block length: 69 *Mar 2 22:05:11.038: DHCP Offer Message Offered Address: 180.40.7.130 *Mar 2 22:05:11.038: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 22:05:11.038: DHCP: Server ID Option: 180.40.7.129 *Mar 2 22:05:11.038: DHCP: offer received from 180.40.7.129 *Mar 2 22:05:11.042: DHCP: SRequest attempt # 1 for entry: *Mar 2 22:05:11.042: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/1 *Mar 2 22:05:11.042: Temp sub net mask: 255.255.255.224 *Mar 2 22:05:11.042: DHCP Lease server: 180.40.7.129, state: 2 Requesting *Mar 2 22:05:11.042: DHCP transaction id: 18C4 *Mar 2 22:05:11.042: Lease: 86400 secs, Renewal: 0 secs, Rebind: 0 secs *Mar 2 22:05:11.042: Next timer fires after: 00:00:03 *Mar 2 22:05:11.042: Retry count: 1 Client-ID: cisco-0012.7f80.f4c1-Fa0/1 *Mar 2 22:05:11.042: Client-ID hex dump: 636973636F2D303031322E376638302E *Mar 2 22:05:11.046: 663463312D4661302F31 *Mar 2 22:05:11.046: Hostname: R4 *Mar 2 22:05:11.050: DHCP: SRequest- Server ID option: 180.40.7.129 *Mar 2 22:05:11.050: DHCP: SRequest- Requested IP addr option: 180.40.7.130 *Mar 2 22:05:11.050: DHCP: SRequest placed lease len option: 86400 *Mar 2 22:05:11.050: DHCP: SRequest: 309 bytes *Mar 2 22:05:11.050: DHCP: SRequest: 309 bytes *Mar 2 22:05:11.050: B'cast on FastEthernet0/1 interface from 0.0.0.0 *Mar 2 22:05:11.054: DHCP: Received a BOOTREP pkt *Mar 2 22:05:11.054: DHCP: Scan: Message type: DHCP Ack *Mar 2 22:05:11.054: DHCP: Scan: Server ID Option: 180.40.7.129 = B4280781 *Mar 2 22:05:11.054: DHCP: Scan: Lease Time: 86400 *Mar 2 22:05:11.058: DHCP: Scan: Renewal time: 43200 *Mar 2 22:05:11.058: DHCP: Scan: Rebind time: 75600 *Mar 2 22:05:11.058: DHCP: Scan: Host Name: R4.cciestudent.com. *Mar 2 22:05:11.058: DHCP: Scan: Subnet Address Option: 255.255.255.224 *Mar 2 22:05:11.058: DHCP: Scan: Router Option: 180.40.7.132 *Mar 2 22:05:11.058: DHCP: Scan: Domain Name: cciestudent.com *Mar 2 22:05:11.058: DHCP: Scan: DNS Name Server Option: 208.28.1.82 *Mar 2 22:05:11.058: DHCP: Scan: TFTP Server address Option: 20.20.20.20 *Mar 2 22:05:11.058: DHCP: rcvd pkt source: 180.40.7.129, destination: 255.255.255.255 *Mar 2 22:05:11.062: UDP sport: 43, dport: 44, length: 338 *Mar 2 22:05:11.062: DHCP op: 2, htype: 1, hlen: 6, hops: 0 *Mar 2 22:05:11.062: DHCP server identifier: 180.40.7.129 *Mar 2 22:05:11.062: xid: 18C4, secs: 0, flags: 8000 *Mar 2 22:05:11.062: client: 0.0.0.0, your: 180.40.7.130 *Mar 2 22:05:11.062: srvr: 0.0.0.0, gw: 0.0.0.0 *Mar 2 22:05:11.062: options block length: 90 *Mar 2 22:05:11.062: DHCP Ack Message *Mar 2 22:05:11.062: DHCP: Lease Seconds: 86400 Renewal secs: 43200 Rebind secs: 75600 *Mar 2 22:05:11.066: DHCP: Server ID Option: 180.40.7.129 *Mar 2 22:05:11.066: DHCP Host Name Option: R4.cciestudent.com. *Mar 2 22:05:14.075: DHCP: Releasing ipl options: *Mar 2 22:05:14.079: DHCP: Applying DHCP options: *Mar 2 22:05:14.079: Setting default_gateway to 180.40.7.132 *Mar 2 22:05:14.079: Adding default route 180.40.7.132 *Mar 2 22:05:15.080: Adding DNS server address 208.28.1.82 *Mar 2 22:05:15.080: Setting default domain to cciestudent.com *Mar 2 22:05:15.080: DHCP Client Pooling: ***Allocated IP address: 180.40.7.130 *Mar 2 22:05:15.144: Allocated IP address = 180.40.7.130 255.255.255.224 *Mar 2 22:05:15.144: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/1 assigned DHCP address 180.40.7.130, mask 255.255.255.224, hostname R4 R4(config-if)# R4(config-if)# *Mar 2 22:05:19.095: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.161 on FastEthernet0/1 from LOADING to FULL, Loading Done *Mar 2 22:05:19.099: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet0/1 from LOADING to FULL, Loading Done R4(config-if)#do sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 180.40.7.132 to network 0.0.0.0 100.0.0.0/24 is subnetted, 1 subnets C 100.1.1.0 is directly connected, Loopback0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/67] via 180.40.7.131, 00:00:10, FastEthernet0/1 [110/67] via 180.40.7.129, 00:00:10, FastEthernet0/1 O 20.10.1.0 [110/66] via 180.40.7.131, 00:00:10, FastEthernet0/1 [110/66] via 180.40.7.129, 00:00:10, FastEthernet0/1 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:00:10, FastEthernet0/1 180.40.0.0/16 is variably subnetted, 5 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/1 O 180.40.7.162/32 [110/65] via 180.40.7.131, 00:00:11, FastEthernet0/1 [110/65] via 180.40.7.129, 00:00:11, FastEthernet0/1 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:00:11, FastEthernet0/1 --More--  O 180.40.7.0/27 [110/65] via 180.40.7.129, 00:00:12, FastEthernet0/1 O 180.40.7.64/27 [110/65] via 180.40.7.131, 00:00:12, FastEthernet0/1 [110/65] via 180.40.7.129, 00:00:12, FastEthernet0/1 S* 0.0.0.0/0 [254/0] via 180.40.7.132 R4(config-if)# ip address 180.40.7.130 255.255.255.224 *Mar 2 22:06:36.907: DHCP: Release IPL called for interface FastEthernet0/1 in state 3 *Mar 2 22:06:36.907: DHCP: SRelease attempt # 1 for entry: *Mar 2 22:06:36.907: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/1 *Mar 2 22:06:36.907: Temp sub net mask: 255.255.255.224 *Mar 2 22:06:36.907: DHCP Lease server: 180.40.7.129, state: 8 Releasing *Mar 2 22:06:36.907: DHCP transaction id: 18C4 *Mar 2 22:06:36.907: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 22:06:36.911: Temp default-gateway addr: 180.40.7.132 *Mar 2 22:06:36.911: Next timer fires after: 00:00:02 *Mar 2 22:06:36.911: Retry count: 1 Client-ID: cisco-0012.7f80.f4c1-Fa0/1 *Mar 2 22:06:36.911: Client-ID hex dump: 636973636F2D303031322E376638302E *Mar 2 22:06:36.911: 663463312D4661302F31 *Mar 2 22:06:36.915: Hostname: R4 *Mar 2 22:06:36.915: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 22:06:36.915: DHCP: SRelease: 279 bytes *Mar 2 22:06:38.329: DHCP: SRelease attempt # 2 for entry: *Mar 2 22:06:38.329: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/1 *Mar 2 22:06:38.329: Temp sub net mask: 255.255.255.224 *Mar 2 22:06:38.329: DHCP Lease server: 180.40.7.129, state: 8 Releasing *Mar 2 22:06:38.329: DHCP transaction id: 18C4 *Mar 2 22:06:38.329: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 22:06:38.329: Temp default-gateway addr: 180.40.7.132 *Mar 2 22:06:38.333: Next timer fires after: 00:00:02 *Mar 2 22:06:38.333: Retry count: 2 Client-ID: cisco-0012.7f80.f4c1-Fa0/1 *Mar 2 22:06:38.333: Client-ID hex dump: 636973636F2D303031322E376638302E *Mar 2 22:06:38.333: 663463312D4661302F31 *Mar 2 22:06:38.337: Hostname: R4 *Mar 2 22:06:38.337: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 22:06:38.337: DHCP: SRelease: 279 bytes *Mar 2 22:06:40.336: DHCP: SRelease attempt # 3 for entry: *Mar 2 22:06:40.336: Temp IP addr: 180.40.7.130 for peer on Interface: FastEthernet0/1 *Mar 2 22:06:40.340: Temp sub net mask: 255.255.255.224 *Mar 2 22:06:40.340: DHCP Lease server: 180.40.7.129, state: 8 Releasing *Mar 2 22:06:40.340: DHCP transaction id: 18C4 *Mar 2 22:06:40.340: Lease: 86400 secs, Renewal: 43200 secs, Rebind: 75600 secs *Mar 2 22:06:40.340: Temp default-gateway addr: 180.40.7.132 *Mar 2 22:06:40.340: Next timer fires after: 00:00:02 *Mar 2 22:06:40.340: Retry count: 3 Client-ID: cisco-0012.7f80.f4c1-Fa0/1 *Mar 2 22:06:40.340: Client-ID hex dump: 636973636F2D303031322E376638302E *Mar 2 22:06:40.344: 663463312D4661302F31 *Mar 2 22:06:40.344: Hostname: R4 *Mar 2 22:06:40.344: DHCP: SRelease placed Server ID option: 180.40.7.129 *Mar 2 22:06:40.348: DHCP: SRelease: 279 bytes R4(config-if)#^Z R4# *Mar 2 22:06:42.343: DHCP: Releasing ipl options: *Mar 2 22:06:42.343: Clearing default gateway and route to 180.40.7.132 *Mar 2 22:06:42.347: Removing old default route 180.40.7.132 *Mar 2 22:06:42.351: Clearing DNS address 208.28.1.82 *Mar 2 22:06:42.351: Clearing default domain of cciestudent.com *Mar 2 22:06:42.424: RAC: DHCP stopped on interface FastEthernet0/1 R4# *Mar 2 22:06:42.440: %SYS-5-CONFIG_I: Configured from console by console R4#u all All possible debugging has been turned off R4# RACK1AS>3 [Resuming connection 3 to r3 ... ] *Mar 15 18:12 R3#confi t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#ip add dhcp R3(config-if)# *Mar 15 18:15:32.992: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 15 18:15:32.992: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.161 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 15 18:15:32.992: %HSRP-5-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Init R3(config-if)# *Mar 15 18:15:32.992: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Master -> Disable R3(config-if)# RACK1AS>7 [Resuming connection 7 to r6 ... ] *Mar 15 18:09:13.784: %SYS-5-CONFIG_I: Configured from console by console R7# R7#confit  t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int fa 1/1 R7(config-if)#ip help R7(config-if)#ip helper-address 180.40.7.66 R7(config-if)#^Z R7# *Mar 15 18:17:35.204: %SYS-5-CONFIG_I: Configured from console by console R7# RACK1AS>3 [Resuming connection 3 to r3 ... ] R3(config-if)#do sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 unassigned YES DHCP up up FastEthernet0/1 unassigned YES TFTP up up Serial0/0/0 180.40.7.66 YES manual up up Serial0/0/1 180.40.7.3 YES manual up up Serial0/1/0 unassigned YES manual administratively down down R3(config-if)#do sh ip int brie *Mar 15 18:18:36.520: %DHCPD-4-PING_CONFLICT: DHCP address conflict: server pinged 180.40.7.131. R3(config-if)#do sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 unassigned YES DHCP up up FastEthernet0/1 unassigned YES TFTP up up Serial0/0/0 180.40.7.66 YES manual up up Serial0/0/1 180.40.7.3 YES manual up up Serial0/1/0 unassigned YES manual administratively down down R3(config-if)# *Mar 15 18:18:37.556: %DHCPD-4-PING_CONFLICT: DHCP address conflict: server pinged 180.40.7.132. R3(config-if)# *Mar 15 18:18:38.592: %DHCPD-4-PING_CONFLICT: DHCP address conflict: server pinged 180.40.7.133. R3(config-if)# *Mar 15 18:18:43.764: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup *Mar 15 18:18:43.764: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Disable *Mar 15 18:18:43.764: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup R3(config-if)# *Mar 15 18:18:44.340: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.161 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 15 18:18:44.344: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from LOADING to FULL, Loading Done R3(config-if)# *Mar 15 18:18:44.876: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.134, mask 255.255.255.224, hostname R3 R3(config-if)# *Mar 15 18:18:45.912: %HSRP-5-STATECHANGE: FastEthernet0/0 Grp 47 state Listen -> Active R3(config-if)# *Mar 15 18:18:47.336: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Master R3(config-if)#exit R3(config)#ip dhcp ex R3(config)#ip dhcp excluded-address ? A.B.C.D Low IP address R3(config)#ip dhcp excluded-address 1803~.40.7.130 .40.7.130 .40.7.130 .40.7.130 180.40.7.134 R3(config)#do sh ip dhcp nib   bind Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 180.40.7.134 0063.6973.636f.2d30. Mar 16 2007 06:18 PM Automatic 3031.612e.3663.6662. 2e62.3763.382d.4661. 302f.30 R3(config)#do sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 180.40.7.134 YES DHCP up up FastEthernet0/1 unassigned YES TFTP up up Serial0/0/0 180.40.7.66 YES manual up up Serial0/0/1 180.40.7.3 YES manual up up Serial0/1/0 unassigned YES manual administratively down down R3(config)#ip dhcp pool Fro  orR3 R3(dhcp-config)#cli R3(dhcp-config)#client-i R3(dhcp-config)#client-identifier 0063.6973.636f.2d30.3031.612e.3663.6662.2e6$tifier 0063.6973.636f.2d30.3031.612e.3663.6662.2e62 .3763.3823.6973.636f.2d30.3031.612e.3663.6662.2e62.3763.382d .4661.302f.2d30.3031.612e.3663.6662.2e62.3763.382d.4661.302f .30 R3(dhcp-config)#host R3(dhcp-config)#host 180.40.7.129 /27 R3(dhcp-config)#do clea ip dhcp bin * % Ambiguous command: "do clea ip dhcp bin *" R3(config)#do clea ip dhcp bin *nd * R3(config)#int fa 0/0 R3(config-if)#no ip add R3(config-if)# *Mar 15 18:22:21.684: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 15 18:22:21.684: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.161 on FastEthernet0/0 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 15 18:22:21.684: %HSRP-5-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Init R3(config-if)# *Mar 15 18:22:21.684: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Master -> Disable R3(config-if)# RACK1AS>4 [Resuming connection 4 to r2 ... ] *Mar 2 22:08:01.48 R4# R4# R4# R4# RACK1AS>3 [Resuming connection 3 to r3 ... ] R3(config-if)# R3(config-if)#ip add dhcp R3(config-if)# R3(config-if)# R3(config-if)# R3(config-if)# *Mar 15 18:22:46.344: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup *Mar 15 18:22:46.344: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Disable *Mar 15 18:22:46.344: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Init -> Backup R3(config-if)#^Z R3# *Mar 15 18:22:46.908: %HSRP-5-STATECHANGE: FastEthernet0/0 Grp 47 state Listen -> Active *Mar 15 18:22:47.444: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 180.40.7.129, mask 255.255.255.224, hostname R3 R3# *Mar 15 18:22:47.696: %SYS-5-CONFIG_I: Configured from console by console R3# R3# R3# R3# R3# *Mar 15 18:22:49.916: %VRRP-6-STATECHANGE: Fa0/0 Grp 47 state Backup -> Master R3# *Mar 15 18:22:51.352: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.161 on FastEthernet0/0 from LOADING to FULL, Loading Done *Mar 15 18:22:51.356: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.130 on FastEthernet0/0 from LOADING to FULL, Loading Done R3#sh ip int brie Interface IP-Address OK? Method Status Protocol FastEthernet0/0 180.40.7.129 YES DHCP up up FastEthernet0/1 unassigned YES TFTP up up Serial0/0/0 180.40.7.66 YES manual up up Serial0/0/1 180.40.7.3 YES manual up up Serial0/1/0 unassigned YES manual administratively down down R3#sh stand brie P indicates configured to preempt. | Interface Grp Prio P State Active Standby Virtual IP Fa0/0 47 110 P Active local 180.40.7.131 180.40.7.132 R3#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 180.40.7.132 to network 0.0.0.0 100.0.0.0/32 is subnetted, 1 subnets O 100.1.1.1 [110/2] via 180.40.7.130, 00:00:20, FastEthernet0/0 20.0.0.0/24 is subnetted, 2 subnets O 20.10.2.0 [110/66] via 180.40.7.67, 00:00:20, Serial0/0/0 [110/66] via 180.40.7.2, 00:00:20, Serial0/0/1 O 20.10.1.0 [110/65] via 180.40.7.67, 00:00:20, Serial0/0/0 [110/65] via 180.40.7.2, 00:00:20, Serial0/0/1 O 208.28.1.0/24 [110/2] via 180.40.7.131, 00:00:20, FastEthernet0/0 180.40.0.0/16 is variably subnetted, 5 subnets, 2 masks C 180.40.7.128/27 is directly connected, FastEthernet0/0 O 180.40.7.162/32 [110/64] via 180.40.7.67, 00:00:21, Serial0/0/0 [110/64] via 180.40.7.2, 00:00:21, Serial0/0/1 O 180.40.7.161/32 [110/1] via 180.40.7.131, 00:00:21, FastEthernet0/0 --More--  C 180.40.7.0/27 is directly connected, Serial0/0/1 C 180.40.7.64/27 is directly connected, Serial0/0/0 S* 0.0.0.0/0 [254/0] via 180.40.7.132 R3#sh run | b dhcp no ip dhcp use vrf connected ip dhcp excluded-address 180.40.7.130 180.40.7.134 ! ip dhcp pool Prob15 network 180.40.7.128 255.255.255.224 default-router 180.40.7.132 domain-name cciestudent.com dns-server 208.28.1.82 option 150 ip 20.20.20.20 ! ip dhcp pool ForR3 host 180.40.7.129 255.255.255.224 client-identifier 0063.6973.636f.2d30.3031.612e.3663.6662.2e62.3763.382d.4661.302f.30 ! ! no ip domain lookup ! ! voice-card 0 no dspfarm ! ! --More--   R3# RACK1AS>7 [Resuming connection 7 to r6 ... ] *Mar 15 18:18:18.908: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.129 on FastEthernet1/1 from LOADING to FULL, Loading Done R7# *Mar 15 18:18:20.484: %HSRP-5-STATECHANGE: FastEthernet1/1 Grp 47 state Active -> Speak R7# R7#sh run int fa 1/1 Building configuration... Current configuration : 232 bytes ! interface FastEthernet1/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 duplex half speed auto vrrp 47 ip 180.40.7.133 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7# RACK1AS>2 [Resuming connection 2 to r4 ... ] R2#confi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#p dhcp pool S6 ^ % Invalid input detected at '^' marker. R2(config)# host 180.40.7.97 255.255.255.224 ^ % Invalid input detected at '^' marker. R2(config)# client-identifier 0063.6973.636f.2d30.3031.322e.3766.3538.2e31.$dentifier 0063.6973.636f.2d30.3031.322e.3766.3538.2e31.3 330.302d.0063.6973.636f.2d30.3031.322e.3766.3538.2e31.3330.302d.4 661.302f.636f.2d30.3031.322e.3766.3538.2e31.3330.302d.4661.302f.3 4 client-identifier 0063.6973.636f.2d30.3031.322e.3766.3538.2e31.3330.302d.4661 ^.302f.34 % Invalid input detected at '^' marker. R2(config)#!$636f.2d30.3031.322e.3766.3538.2e31.3330.302d.4661.302f.34 host 180.40.7.97 255.255.255.224 p dhcp pool S6 ip dhcp pool S6 R2(dhcp-config)#ip dhcp pool S6$636f.2d30.3031.322e.3766.3538.2e31.3330.302d.4661.302f.34 host 180.40.7.97 255.255.255.224  255.255.255.224  255.255.255.224  255.255.255.224  255.255.255.224  255.255.255.224  255.255.255.224  255.255.255.224  255.255.255.224  255.255.255.224  255.255.255.224  255.255.255.224 2 255.255.255.2240 255.255.255.224. 255.255.255.2241 255.255.255.2240 255.255.255.224. 255.255.255.2241 255.255.255.224. 255.255.255.2242 255.255.255.224 255.255.255.224   0 R2(dhcp-config)# host 20.10.1.2 255.255.255.0ip dhcp pool S6 $636f.2d30.3031.322e.3766.3538.2e31.3330.302d.4661.302f.34 R2(dhcp-config)#int fa 0/1 R2(config-if)#ip help 208.28.1.99 R2(config-if)#^Z R2# *Mar 15 18:30:00.436: %SYS-5-CONFIG_I: Configured from console by console R2# R2# R2# R2# RACK1AS>7 [Resuming connection 7 to r6 ... ] R7#conf t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int s 0/0/0.2 R7(config-subif)#ip help 208.28.1.99 R7(config-subif)#do sh run int s 0/0/0.2 Building configuration... Current configuration : 257 bytes ! interface Serial0/0/0.2 point-to-point bandwidth 1544 ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 end R7(config-subif)#frame-relay interface-dlci 702 ? cisco Use CISCO Encapsulation ietf Use RFC1490/RFC2427 Encapsulation ppp Use RFC1973 Encapsulation to support PPP over FR protocol Optional protocol information for remote end R7(config-subif)#frame-relay interface-dlci 702 pr R7(config-subif)#frame-relay interface-dlci 702 protocol ? A.B.C.D Protocol specific address ip IP R7(config-subif)#frame-relay interface-dlci 702 protocol 180.40.7.162 %Can't add another VC to point-to-point subinterface R7(config-fr-dlci)#exit R7(config-subif)#no frame-relay interface-dlci 702 R7(config-subif)# *Mar 15 18:32:02.588: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.98 on Serial0/0/0.2 from FULL to DOWN, Neighbor Down: Interface down or detached R7(config-subif)#no frame-relay interface-dlci 702exit frame-relay interface-dlci 702 protocol 180.40.7.162 R7(config-fr-dlci)# *Mar 15 18:32:11.384: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.98 on Serial0/0/0.2 from LOADING to FULL, Loading Done R7(config-fr-dlci)#^Z R7# *Mar 15 18:32:16.904: %SYS-5-CONFIG_I: Configured from console by console R7#p 180.40.7.162 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.162, timeout is 2 seconds: . RACK1AS>2 [Resuming connection 2 to r4 ... ] *Mar 15 18:32:36 R2#conf t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 0/0/0.2 R2(config-subif)#shut R2(config-subif)#no *Mar 15 18:33:00.432: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.161 on Serial0/0/0.2 from FULL to DOWN, Neighbor Down: Interface down or detached R2(config-subif)#no shut R2(config-subif)#^Z R2# *Mar 15 18:33:05.164: %SYS-5-CONFIG_I: Configured from console by console R2# RACK1AS>7 [Resuming connection 7 to r6 ... ] .. R7#p 180.40.7.162 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.162, timeout is 2 seconds: . RACK1AS>2 [Resuming connection 2 to r4 ... ] *Mar 15 18: R2#p 180.40.7.162 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.162, timeout is 2 seconds: ... Success rate is 0 percent (0/3) R2#p 180.40.7.162 1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.161, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 40/42/44 ms R2# RACK1AS>7 [Resuming connection 7 to r6 ... ] .! R7#p 180.40.7.162 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.162, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 28/28/32 ms R7#sh run int s 0/0/0.2 Building configuration... Current configuration : 279 bytes ! interface Serial0/0/0.2 point-to-point bandwidth 1544 ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 protocol ip 180.40.7.162 end R7# RACK1AS>2 [Resuming connection 2 to r4 ... ] R2#sh run | b dhcp no ip dhcp use vrf connected ! ip dhcp pool S6 host 20.10.1.2 255.255.255.0 client-identifier 0063.6973.636f.2d30.3031.322e.3766.3538.2e31.3330.302d.4661.302f.34 ! ! no ip domain lookup ! frame-relay de-list 1 protocol ip list 100 ! voice-card 0 no dspfarm ! ! ! ! ! ! ! ! ! --More--  ! ! ! ! ! ! ! ! ! ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 ip address 20.10.1.1 255.255.255.0 ip helper-address 208.28.1.99 duplex auto speed auto ! --More--   R2# RACK1AS>3 [Resuming connection 3 to r3 ... ] R3#conf t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#int fa 0/0 R3(config-if)#gl R3(config-if)#glbp ? <0-1023> Group number R3(config-if)#glbp 47 ? authentication Authentication method forwarder Forwarder configuration ip Enable group and set virtual IP address load-balancing Load balancing method name Redundancy name preempt Overthrow lower priority designated routers priority Priority level timers Adjust GLBP timers weighting Gateway weighting and tracking R3(config-if)#glbp 47 ip 180.40.7.134 R3(config-if)# *Mar 15 18:36:38.628: %GLBP-6-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active R3(config-if)# *Mar 15 18:36:48.628: %GLBP-6-FWDSTATECHANGE: FastEthernet0/0 Grp 47 Fwd 1 state Listen -> Active R3(config-if)# RACK1AS>7 [Resuming connection 7 to r6 ... ] R7#conf t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#int f 1/1 R7(config-if)#gl R7(config-if)#glbp 47 ip 180.40.7.134 R7(config-if)#^Z R7# *Mar 15 18:40:53.528: %SYS-5-CONFIG_I: Configured from console by console R7#sh gl R7#sh glbp FastEthernet1/1 - Group 47 State is Init (interface down) Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is unknown Standby is unknown Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Load balancing: round-robin Group members: 001a.6dc0.b662 (180.40.7.131) local There are no forwarders R7#sh glbp FastEthernet1/1 - Group 47 State is Listen Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 0.140 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.129, priority 100 (expires in 9.128 sec) Standby is unknown Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Load balancing: round-robin Group members: 001a.6cfb.b7c8 (180.40.7.129) 001a.6dc0.b662 (180.40.7.131) local There are 2 forwarders (0 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 001a.6cfb.b7c8 Time to live: 14399.128 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.129 (primary), weighting 100 (expires in 9.128 sec) --More--   Forwarder 2 State is Listen MAC address is 0007.b400.2f02 (default) Owner ID is 001a.6dc0.b662 Preemption enabled, min delay 30 sec Active is unknown R7# *Mar 15 18:41:15.212: %GLBP-6-FWDSTATECHANGE: FastEthernet1/1 Grp 47 Fwd 2 state Listen -> Active R7#sh glbp FastEthernet1/1 - Group 47 State is Standby 1 state change, last state change 00:00:39 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 2.500 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.129, priority 100 (expires in 9.488 sec) Standby is local Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Load balancing: round-robin Group members: 001a.6cfb.b7c8 (180.40.7.129) 001a.6dc0.b662 (180.40.7.131) local There are 2 forwarders (1 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 001a.6cfb.b7c8 Time to live: 14399.488 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec --More--   Active is 180.40.7.129 (primary), weighting 100 (expires in 7.720 sec) Forwarder 2 State is Active 1 state change, last state change 00:00:51 MAC address is 0007.b400.2f02 (default) Owner ID is 001a.6dc0.b662 Preemption enabled, min delay 30 sec Active is local, weighting 100 R7#conf t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#track R7(config)#track 1 ip ? route IP route R7(config)#track 1 ip rou re R7(config)#track 1 ip rou re  1 ~20.10.1.0/24 re R7(config)#track 1 ip rou ~20.10.1.0/24 re20.10.1.0/24 re  R7(config-track)#int fa 0 1/1 R7(config-if)#gl R7(config-if)#glbp 47 we R7(config-if)#glbp 47 weighting ? <1-254> Weighting maximum value track Interface tracking R7(config-if)#glbp 47 weighting tr R7(config-if)#glbp 47 weighting track ? <1-500> Tracked object R7(config-if)#glbp 47 weighting track 1 ? decrement Weighting decrement R7(config-if)#glbp 47 weighting track 1 de R7(config-if)#glbp 47 weighting track 1 decrement 100 R7(config-if)#do sh gla b % Ambiguous command: "do sh glb" R7(config-if)#do sh glb FastEthernet1/1 - Group 47 State is Standby 1 state change, last state change 00:05:38 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 0.816 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.129, priority 100 (expires in 7.800 sec) Standby is local Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Track object 1 state Up decrement 100 Load balancing: round-robin Group members: 001a.6cfb.b7c8 (180.40.7.129) 001a.6dc0.b662 (180.40.7.131) local There are 2 forwarders (1 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 001a.6cfb.b7c8 Time to live: 14397.800 sec (maximum 14400 sec) --More--   R7(config-if)#^Z R7# RACK1AS>3 [Resuming connection 3 to r3 ... ] R3(config-if)#exit R3(config)#tra R3(config)#tra4  R3(config)#track R3(config)#track 4 ip rou 1 20.10.1.0/24 re R3(config)#track 4 ip rou 20.10.1.0/24 reachability R3(config-track)#int af  fa 09/  /0 R3(config-if)#gl R3(config-if)#glbp 47 we R3(config-if)#glbp 47 weighting tr R3(config-if)#glbp 47 weighting track 4 dec R3(config-if)#glbp 47 weighting track 4 decrement 100 R3(config-if)#do sh trac Track 1 (via HSRP) Interface Serial0/0/0 line-protocol Line protocol is Up 1 change, last change 15:19:16 Tracked by: HSRP FastEthernet0/0 47 Track 2 (via HSRP) Interface Serial0/0/1 line-protocol Line protocol is Up 3 changes, last change 15:16:09 Tracked by: HSRP FastEthernet0/0 47 Track 3 IP route 20.10.2.0 255.255.255.0 reachability Reachability is Up (OSPF) 1 change, last change 15:10:33 First-hop interface is Serial0/0/0 Tracked by: HSRP FastEthernet0/0 47 Track 4 IP route 20.10.1.0 255.255.255.0 reachability Reachability is Up (OSPF) 1 change, last change 00:00:34 --More--   R3(config-if)#do sh tracglbp 47 weighting track 4 decrement 100 decrement 100 2 decrement 100 R3(config-if)#^Z R3# RACK1AS>2 [Resuming connection 2 to r4 ... ] R2#co  nfi t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int s 0/0/1 R2(config-if)#shut R2(config-if)# RACK1AS>3 [Resuming connection 3 to r3 ... ] *Mar 15 18: R3# *Mar 15 18:49:37.348: %LINK-3-UPDOWN: Interface Serial0/0/1, changed state to down R3# *Mar 15 18:49:37.348: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.98 on Serial0/0/1 from FULL to DOWN, Neighbor Down: Interface down or detached *Mar 15 18:49:37.908: %HSRP-5-STATECHANGE: FastEthernet0/0 Grp 47 state Active -> Speak *Mar 15 18:49:38.348: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to down R3# R3# R3# R3#sh gla  FastEthernet0/0 - Group 47 State is Active 2 state changes, last state change 00:13:04 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.584 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is local Standby is 180.40.7.131, priority 100 (expires in 8.592 sec) Priority 100 (default) Weighting 0, low (default 100), thresholds: lower 1, upper 100 Track object 2 state Down decrement 100 Track object 4 state Up decrement 100 Load balancing: round-robin Group members: 001a.6cfb.b7c8 (180.40.7.129) local 001a.6dc0.b662 (180.40.7.131) There are 2 forwarders (1 active) Forwarder 1 State is Active 1 state change, last state change 00:12:54 MAC address is 0007.b400.2f01 (default) --More--   Owner ID is 001a.6cfb.b7c8 Redirection enabled Preemption enabled, min delay 30 sec Active is local, weighting 0 Forwarder 2 State is Listen MAC address is 0007.b400.2f02 (learnt) Owner ID is 001a.6dc0.b662 Redirection enabled, 597.492 sec remaining (maximum 600 sec) Time to live: 14397.492 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 7.492 sec) R3# *Mar 15 18:49:47.908: %HSRP-5-STATECHANGE: FastEthernet0/0 Grp 47 state Speak -> Standby R3# RACK1AS>7 [Resuming connection 7 to r6 ... ] *Mar 15 18:47:22.744: %SYS-5-CONFIG_I: Configured from console by console R7# R7#conf tsh glbp FastEthernet1/1 - Group 47 State is Standby 1 state change, last state change 00:08:07 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.104 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is 180.40.7.129, priority 100 (expires in 8.092 sec) Standby is local Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Track object 1 state Up decrement 100 Load balancing: round-robin Group members: 001a.6cfb.b7c8 (180.40.7.129) 001a.6dc0.b662 (180.40.7.131) local There are 2 forwarders (1 active) Forwarder 1 State is Listen MAC address is 0007.b400.2f01 (learnt) Owner ID is 001a.6cfb.b7c8 Time to live: 14398.092 sec (maximum 14400 sec) --More--   Preemption enabled, min delay 30 sec (9 secs remaining) Active is 180.40.7.129 (primary), weighting 0, low (expires in 7.148 sec) Forwarder 2 State is Active 1 state change, last state change 00:08:15 MAC address is 0007.b400.2f02 (default) Owner ID is 001a.6dc0.b662 Preemption enabled, min delay 30 sec Active is local, weighting 100 R7# *Mar 15 18:49:40.200: %GLBP-6-FWDSTATECHANGE: FastEthernet1/1 Grp 47 Fwd 1 state Listen -> Active R7# RACK1AS>3 [Resuming connection 3 to r3 ... ] *Mar 15 18:50:0 R3#sh gl FastEthernet0/0 - Group 47 State is Active 2 state changes, last state change 00:13:58 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 2.000 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is local Standby is 180.40.7.131, priority 100 (expires in 9.008 sec) Priority 100 (default) Weighting 0, low (default 100), thresholds: lower 1, upper 100 Track object 2 state Down decrement 100 Track object 4 state Up decrement 100 Load balancing: round-robin Group members: 001a.6cfb.b7c8 (180.40.7.129) local 001a.6dc0.b662 (180.40.7.131) There are 2 forwarders (0 active) Forwarder 1 State is Listen 2 state changes, last state change 00:00:31 MAC address is 0007.b400.2f01 (default) --More--   Owner ID is 001a.6cfb.b7c8 Redirection enabled Preemption enabled, min delay 30 sec Active is 180.40.7.131 (secondary), weighting 100 (expires in 7.032 sec) Forwarder 2 State is Listen MAC address is 0007.b400.2f02 (learnt) Owner ID is 001a.6dc0.b662 Redirection enabled, 597.032 sec remaining (maximum 600 sec) Time to live: 14397.032 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 7.032 sec) R3# RACK1AS>2 [Resuming connection 2 to r4 ... ] *Mar 15 18:49 R2(config-if)#no shut R2(config-if)#^Z R2# RACK1AS>3 [Resuming connection 3 to r3 ... ] R3#sh gl *Mar 15 18:50:53.520: %LINK-3-UPDOWN: Interface Serial0/0/1, changed state to up R3#sh glconf t *Mar 15 18:50:53.536: %OSPF-5-ADJCHG: Process 1, Nbr 180.40.7.98 on Serial0/0/1 from LOADING to FULL, Loading Done *Mar 15 18:50:54.520: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to up R3#conf tsh gl  FastEthernet0/0 - Group 47 State is Active 2 state changes, last state change 00:14:17 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 0.316 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is local Standby is 180.40.7.131, priority 100 (expires in 7.324 sec) Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Track object 2 state Up decrement 100 Track object 4 state Up decrement 100 Load balancing: round-robin Group members: 001a.6cfb.b7c8 (180.40.7.129) local 001a.6dc0.b662 (180.40.7.131) There are 2 forwarders (0 active) Forwarder 1 State is Listen 2 state changes, last state change 00:00:50 MAC address is 0007.b400.2f01 (default) --More-- *Mar 15 18:50:55.904: %HSRP-5-STATECHANGE: FastEthernet0/0 Grp 47 state Standby -> Active --More--   Owner ID is 001a.6cfb.b7c8 Redirection enabled Preemption enabled, min delay 30 sec (22 secs remaining) Active is 180.40.7.131 (secondary), weighting 100 (expires in 8.160 sec) Forwarder 2 State is Listen MAC address is 0007.b400.2f02 (learnt) Owner ID is 001a.6dc0.b662 Redirection enabled, 598.160 sec remaining (maximum 600 sec) Time to live: 14398.160 sec (maximum 14400 sec) Preemption enabled, min delay 30 sec Active is 180.40.7.131 (primary), weighting 100 (expires in 8.160 sec) R3# *Mar 15 18:51:23.636: %GLBP-6-FWDSTATECHANGE: FastEthernet0/0 Grp 47 Fwd 1 state Listen -> Active R3# R3# R3# R3# R3# R3#sh arun      tra % Ambiguous command: "sh tra" R3#sh tracgl  FastEthernet0/0 - Group 47 State is Active 2 state changes, last state change 00:15:10 Virtual IP address is 180.40.7.134 Hello time 3 sec, hold time 10 sec Next hello sent in 1.316 secs Redirect time 600 sec, forwarder time-out 14400 sec Preemption disabled Active is local Standby is 180.40.7.131, priority 100 (expires in 8.324 sec) Priority 100 (default) Weighting 100 (default 100), thresholds: lower 1, upper 100 Track object 2 state Up decrement 100 Track object 4 state Up decrement 100 Load balancing: round-robin Group members: 001a.6cfb.b7c8 (180.40.7.129) local 001a.6dc0.b662 (180.40.7.131) There are 2 forwarders (1 active) Forwarder 1 State is Active 3 state changes, last state change 00:00:25 MAC address is 0007.b400.2f01 (default) --More--   R3#[Ash gl  track Track 1 (via HSRP) Interface Serial0/0/0 line-protocol Line protocol is Up 1 change, last change 15:22:16 Tracked by: HSRP FastEthernet0/0 47 Track 2 (via HSRP) Interface Serial0/0/1 line-protocol Line protocol is Up 5 changes, last change 00:01:01 Tracked by: HSRP FastEthernet0/0 47 GLBP FastEthernet0/0 47 Track 3 IP route 20.10.2.0 255.255.255.0 reachability Reachability is Up (OSPF) 1 change, last change 15:13:34 First-hop interface is Serial0/0/0 Tracked by: HSRP FastEthernet0/0 47 Track 4 IP route 20.10.1.0 255.255.255.0 reachability Reachability is Up (OSPF) --More--   1 change, last change 00:03:35 First-hop interface is Serial0/0/0 Tracked by: GLBP FastEthernet0/0 47 R3# R3# R3# R3# R3#sh run int fa 0/0 Building configuration... Current configuration : 455 bytes ! interface FastEthernet0/0 ip address dhcp ip policy route-map Prob1 duplex auto speed auto vrrp 47 ip 180.40.7.133 vrrp 47 priority 110 glbp 47 ip 180.40.7.134 glbp 47 weighting track 2 decrement 100 glbp 47 weighting track 4 decrement 100 standby 47 ip 180.40.7.132 standby 47 priority 110 standby 47 preempt standby 47 track Serial0/0/0 11 standby 47 track Serial0/0/1 11 standby 47 track 3 decrement 20 service-policy input test end R3# RACK1AS>7 [Resuming connection 7 to r6 ... ] *Mar 15 18:50:30.480: %HSRP-5-STATECHANGE: FastEthernet1/1 Grp 47 state Active -> Speak R7# *Mar 15 18:50:40.480: %HSRP-5-STATECHANGE: FastEthernet1/1 Grp 47 state R7#sh run int fa 1/1 Building configuration... Current configuration : 298 bytes ! interface FastEthernet1/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 duplex half speed auto vrrp 47 ip 180.40.7.133 glbp 47 ip 180.40.7.134 glbp 47 weighting track 1 decrement 100 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 end R7# RACK1AS>4 [Resuming connection 4 to r2 ... ] *Mar 2 22: R4#p 180.40.7.134 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.134, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms R4#p 180.40.7.134 3 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.133, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 1/2/4 ms R4#p 180.40.7.133 2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 180.40.7.132, timeout is 2 seconds: .!!!! Success rate is 80 percent (4/5), round-trip min/avg/max = 1/2/4 ms R4# R4# R4# RACK1AS>6 [Resuming connection 6 to s2 ... ] S6# S6# S6# S6#confi t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#mls wod s     qos map dsc S6(config)#mls qos map dscp-c S6(config)#mls qos map dscp-cos 8 9 10   1 13 15 to 0 S6(config)#mls qq os map dsc S6(config)#mls qos map dscp-co S6(config)#mls qos map dscp-cos 24 25 27 29 31 to 2 S6(config)#do sh mls qos map dscp-c Dscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 00 00 00 00 00 00 00 00 00 00 1 : 01 00 01 00 01 00 02 02 02 02 2 : 02 02 02 02 02 02 03 02 03 02 3 : 03 02 04 04 04 04 04 04 04 04 4 : 05 05 05 05 05 05 05 05 06 06 5 : 06 06 06 06 06 06 07 07 07 07 6 : 07 07 07 07 S6(config)#int ga i 0/1 S6(config-if)#do sh mls qos int gi 0/1 qu GigabitEthernet0/1 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 Dscp-threshold map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 01 01 01 01 01 01 01 01 01 01 1 : 01 01 01 01 01 01 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 01 01 01 01 01 01 01 01 4 : 01 01 01 01 01 01 01 01 01 01 5 : 01 01 01 01 01 01 01 01 01 01 6 : 01 01 01 01 Cos-queue map: cos-qid 0 - 1 1 - 1 2 - 2 3 - 2 4 - 3 5 - 3 6 - 4 7 - 4 S6(config-if)#wrr S6(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id dscp-map Configure dscp-map for a queue threshold queue-limit Configure queue-limit random-detect Configure random-detect threshold Configure queue tail-drop thresholds S6(config-if)#wrr-queue ca S6(config-if)#wrr-queue ca o S6(config-if)#wrr-queue cos-map ? <1-4> enter cos-map queue id S6(config-if)#wrr-queue cos-map 2 0 4 5 6 7 S6(config-if)#wrr-queue cos-map 2 0 4 5 6 7           3 3 S6(config-if)#wrr-queue cos-map 3 32 0 4 5 6 7do sh mls qos int gi 0/1 qu  GigabitEthernet0/1 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 25 3 - 25 4 - 25 Dscp-threshold map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 01 01 01 01 01 01 01 01 01 01 1 : 01 01 01 01 01 01 01 01 01 01 2 : 01 01 01 01 01 01 01 01 01 01 3 : 01 01 01 01 01 01 01 01 01 01 4 : 01 01 01 01 01 01 01 01 01 01 5 : 01 01 01 01 01 01 01 01 01 01 6 : 01 01 01 01 Cos-queue map: cos-qid 0 - 2 1 - 1 2 - 2 3 - 3 4 - 2 5 - 2 6 - 2 7 - 2 S6(config-if)#wr S6(config-if)#wrr-queue b S6(config-if)#wrr-queue bandwidth ? <1-65536> enter bandwidth weight for qid 1 S6(config-if)#wrr-queue bandwidth 25 50 25 1 S6(config-if)#wr S6(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id dscp-map Configure dscp-map for a queue threshold queue-limit Configure queue-limit random-detect Configure random-detect threshold Configure queue tail-drop thresholds S6(config-if)#wrr-queue ds S6(config-if)#wrr-queue dscp-map ? <1-2> enter dscp-map threshold id (1-2) S6(config-if)#wrr-queue dscp-map 2 ? <0-63> DSCP values separated by spaces (up to 8 values total) S6(config-if)#wrr-queue dscp-map 2 10 26 S6(config-if)#wrr-queue dscp-map 2 10 26bandwidth 25 50 25 1do sh mls qos int gi 0/1 qu  GigabitEthernet0/1 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 50 3 - 25 4 - 1 Dscp-threshold map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 01 01 01 01 01 01 01 01 01 01 1 : 02 01 01 01 01 01 01 01 01 01 2 : 01 01 01 01 01 01 02 01 01 01 3 : 01 01 01 01 01 01 01 01 01 01 4 : 01 01 01 01 01 01 01 01 01 01 5 : 01 01 01 01 01 01 01 01 01 01 6 : 01 01 01 01 Cos-queue map: cos-qid 0 - 2 1 - 1 2 - 2 3 - 3 4 - 2 5 - 2 6 - 2 7 - 2 S6(config-if)#wr S6(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id dscp-map Configure dscp-map for a queue threshold queue-limit Configure queue-limit random-detect Configure random-detect threshold Configure queue tail-drop thresholds S6(config-if)#wrr-queue ? bandwidth Configure WRR bandwidth cos-map Configure cos-map for a queue id dscp-map Configure dscp-map for a queue threshold queue-limit Configure queue-limit random-detect Configure random-detect threshold Configure queue tail-drop thresholds S6(config-if)#wrr-queue threshold ? <1-4> enter threshold queue id (1-4) S6(config-if)#wrr-queue threshold 1 ? <1-100> enter percent of queue size for threshold 1 S6(config-if)#wrr-queue threshold 1 40 ? <1-100> enter percent of queue size for threshold 2 S6(config-if)#wrr-queue threshold 1 40 100 S6(config-if)#wrr-queue threshold 1 40 1000 100 60 1001 60 100 3 60 100 S6(config-if)#^Z S6# 1d23h: %SYS-5-CONFIG_I: Configured from console by console S6# S6# S6# S6#sh run | b mls mls qos map dscp-cos 8 9 11 13 15 to 0 mls qos map dscp-cos 24 25 27 29 31 to 2 mls qos map ip-prec-dscp 0 14 16 28 32 40 48 56 mls qos ip subnet-zero ip routing no ip domain-lookup ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! interface FastEthernet0/1 no switchport ip address 20.10.2.1 255.255.255.0 --More--  ! interface FastEthernet0/2 switchport access vlan 10 switchport mode dynamic desirable mls qos trust dscp ! interface FastEthernet0/3 switchport mode dynamic desirable ! interface FastEthernet0/4 no switchport ip address 20.10.1.2 255.255.255.0 ! interface FastEthernet0/5 switchport mode dynamic desirable ! interface FastEthernet0/6 switchport access vlan 10 switchport mode dynamic desirable mls qos trust ip-precedence ! interface FastEthernet0/7 switchport access vlan 10 --More--   switchport mode dynamic desirable ! interface FastEthernet0/8 switchport mode dynamic desirable ! interface FastEthernet0/9 switchport mode dynamic desirable ! interface FastEthernet0/10 switchport mode dynamic desirable ! interface FastEthernet0/11 switchport mode dynamic desirable ! interface FastEthernet0/12 switchport mode dynamic desirable shutdown ! interface FastEthernet0/13 switchport mode dynamic desirable shutdown ! interface FastEthernet0/14 --More--   switchport mode dynamic desirable shutdown ! interface FastEthernet0/15 switchport mode dynamic desirable shutdown ! interface FastEthernet0/16 switchport mode dynamic desirable shutdown ! interface FastEthernet0/17 switchport mode dynamic desirable shutdown ! interface FastEthernet0/18 switchport mode dynamic desirable shutdown ! interface FastEthernet0/19 switchport mode dynamic desirable shutdown ! --More--  interface FastEthernet0/20 switchport mode dynamic desirable shutdown ! interface FastEthernet0/21 switchport mode dynamic desirable shutdown ! interface FastEthernet0/22 switchport mode dynamic desirable shutdown ! interface FastEthernet0/23 switchport mode dynamic desirable shutdown ! interface FastEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk ! interface GigabitEthernet0/1 switchport mode dynamic desirable wrr-queue bandwidth 25 50 25 1 --More--   wrr-queue threshold 1 40 100 wrr-queue threshold 3 60 100 wrr-queue cos-map 1 1 wrr-queue cos-map 2 0 2 4 5 6 7 wrr-queue cos-map 3 3 wrr-queue dscp-map 2 10 26 ! interface GigabitEthernet0/2 switchport mode dynamic desirable ! interface Vlan1 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless ip http server ip http secure-server ! ! --More--  ! control-plane ! ! line con 0 exec-timeout 0 0 line vty 0 4 privilege level 15 no login line vty 5 15 login ! end S6#q conf t Enter configuration commands, one per line. End with CNTL/Z. S6(config)#nt    int gi 0/2] ^ % Invalid input detected at '^' marker. S6(config)#int gi 0/2]  S6(config-if)# wrr-queue cos-map 1 1 S6(config-if)# wrr-queue cos-map 2 0 2 4 5 6 7 S6(config-if)# wrr-queue cos-map 3 3 S6(config-if)# wrr-queue dscp-map 2 10 26 S6(config-if)# wrr-queue dscp-map 2 10 260 26  26      1 10 S6(config-if)# wrr-queue bandwidth 25 50 25 1 S6(config-if)#wr S6(config-if)#wrr-queue           do sh run   mls qos int f gi 0/2 q GigabitEthernet0/2 Egress expedite queue: dis wrr bandwidth weights: qid-weights 1 - 25 2 - 50 3 - 25 4 - 1 Dscp-threshold map: d1 : d2 0 1 2 3 4 5 6 7 8 9 --------------------------------------- 0 : 01 01 01 01 01 01 01 01 01 01 1 : 01 01 01 01 01 01 01 01 01 01 2 : 01 01 01 01 01 01 02 01 01 01 3 : 01 01 01 01 01 01 01 01 01 01 4 : 01 01 01 01 01 01 01 01 01 01 5 : 01 01 01 01 01 01 01 01 01 01 6 : 01 01 01 01 Cos-queue map: cos-qid 0 - 2 1 - 1 2 - 2 3 - 3 4 - 2 5 - 2 6 - 2 7 - 2 S6(config-if)#wrr S6(config-if)#wrr-queue r S6(config-if)#wrr-queue random-detect ? max-threshold max-thresholds S6(config-if)#wrr-queue random-detect m S6(config-if)#wrr-queue random-detect max-threshold ? <1-4> enter threshold queue id (1-4) S6(config-if)#wrr-queue random-detect max-threshold 3 ? <1-100> enter percent of queue size for threshold 1 S6(config-if)#wrr-queue random-detect max-threshold 3 40 80 ? S6(config-if)#wrr-queue random-detect max-threshold 3 40 80 S6(config-if)#^Z S6# 1d23h: %SYS-5-CONFIG_I: Configured from console by console S6# S6# S6# S6#sh run int gi 0/2 Building configuration... Current configuration : 254 bytes ! interface GigabitEthernet0/2 switchport mode dynamic desirable wrr-queue bandwidth 25 50 25 1 wrr-queue random-detect max-threshold 3 40 80 wrr-queue cos-map 1 1 wrr-queue cos-map 2 0 2 4 5 6 7 wrr-queue cos-map 3 3 wrr-queue dscp-map 2 26 end S6# RACK1AS>7 [Resuming connection 7 to r6 ... ] R7#sh run | b cla class-map match-any jpeg match protocol http mime "*jpg" match protocol http mime "*jpe" match protocol http mime "*jpeg" match protocol http url "*jpg" match protocol http url "*jpe" match protocol http url "*jpeg" class-map match-all S5Telnet match access-group name S5 match protocol telnet class-map match-all S5 match access-group name S5 class-map match-all notused ! ! policy-map Prob5 class jpeg shape average 1000000 class S5Telnet bandwidth 1000 class S5 police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 --More--   R7#conf t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#ip nb R7(config)#ip nbar po R7(config)#ip nbar port-map ftp tcp 20 21 R7(config)#class   R7(config)#class-map ftp R7(config-cmap)#match pro R7(config-cmap)#match protocol ftp R7(config-cmap)#exit R7(config)#cl R7(config)#cla R7(config)#class-map telnet R7(config-cmap)#class-map telnetexit match protocol ftp   telnet R7(config-cmap)#exiyt ^ % Invalid input detected at '^' marker. R7(config-cmap)#exiyt  t R7(config)#pol R7(config)#policy-map R7(config)#policy-map Prob20to22 R7(config-pmap)#clas R7(config-pmap)#class ftp R7(config-pmap-c)#ban R7(config-pmap-c)#bandwidth p R7(config-pmap-c)#bandwidth percent 25 R7(config-pmap-c)#bandwidth percent 25class ftp    telnet R7(config-pmap-c)#class telnetbandwidth percent 25 R7(config-pmap-c)#class R7(config-pmap-c)#class class-default R7(config-pmap-c)#b R7(config-pmap-c)#bandwidth p R7(config-pmap-c)#bandwidth percent 50 R7(config-pmap-c)#int fa 0/0 ^ % Invalid input detected at '^' marker. R7(config)#int fa 0/0/0 1/0 R7(config-if)#ser R7(config-if)#service-policy out  R7(config-if)#service-policy out Prob20to22 I/f FastEthernet1/0 class class-default requested bandwidth 50%, available only 25% R7(config-if)#max R7(config-if)#max-reserved-bandwidth 100 R7(config-if)#max-reserved-bandwidth 100service-policy out Prob20to22 R7(config-if)# R7(config-if)# R7(config-if)# R7(config-if)#^Z R7#sh *Mar 15 19:19:03.488: %SYS-5-CONFIG_I: Configured from console by console R7#sh run | b class class-map match-all telnet match protocol telnet class-map match-any jpeg match protocol http mime "*jpg" match protocol http mime "*jpe" match protocol http mime "*jpeg" match protocol http url "*jpg" match protocol http url "*jpe" match protocol http url "*jpeg" class-map match-all S5Telnet match access-group name S5 match protocol telnet class-map match-all ftp match protocol ftp class-map match-all S5 match access-group name S5 class-map match-all notused ! ! policy-map Prob5 class jpeg shape average 1000000 class S5Telnet --More--   R7#sh run | b class     nba ip nbar port-map ftp tcp 20 21 ! ! no ip domain lookup ! voice-card 0 no dspfarm ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! --More--  ! track 1 ip route 20.10.1.0 255.255.255.0 reachability ! class-map match-all telnet match protocol telnet class-map match-any jpeg match protocol http mime "*jpg" match protocol http mime "*jpe" match protocol http mime "*jpeg" match protocol http url "*jpg" match protocol http url "*jpe" match protocol http url "*jpeg" class-map match-all S5Telnet match access-group name S5 match protocol telnet class-map match-all ftp match protocol ftp class-map match-all S5 match access-group name S5 class-map match-all notused ! ! policy-map Prob5 --More--   class jpeg shape average 1000000 class S5Telnet bandwidth 1000 class S5 police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob20to22 class ftp bandwidth percent 25 class telnet bandwidth percent 25 class class-default bandwidth percent 50 ! ! ! ! ! ! interface GigabitEthernet0/0 no ip address shutdown --More--   duplex auto speed auto media-type rj45 no keepalive ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto media-type rj45 no keepalive ! interface Serial0/0/0 bandwidth 1544 no ip address encapsulation frame-relay frame-relay interface-queue priority ! interface Serial0/0/0.1 point-to-point bandwidth 1544 ip address 180.40.7.65 255.255.255.224 ip ospf network broadcast --More--   ip ospf priority 0 frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! interface Serial0/0/0.2 point-to-point bandwidth 1544 ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 protocol ip 180.40.7.162 ! interface Serial0/0/1 no ip address shutdown ! interface Serial0/0/2 no ip address shutdown ! interface Serial0/0/3 no ip address shutdown --More--  ! interface FastEthernet1/0 ip address 208.28.1.1 255.255.255.0 duplex half speed auto max-reserved-bandwidth 100 service-policy output Prob20to22 ! interface FastEthernet1/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 duplex half speed auto vrrp 47 ip 180.40.7.133 glbp 47 ip 180.40.7.134 glbp 47 weighting track 1 decrement 100 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 --More--   R7#conf t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#service-policy out Prob20to22max-reserved-bandwidth 100 service-policy out Prob20to22int fa 1/0 0/0bandwidth percent 50class class-default bandwidth percent 25class telnet bandwidth percent 25class ftp policy-map Prob20to22exit policy-map Prob20to22 R7(config-pmap)#exit R7(config)#ip access-list ex Prob2122 R7(config-ext-nacl)#per ip host 83.23.11.123 any R7(config-ext-nacl)#per ip host 83.23.11.123 any   a83.23.11.123 n83.23.11.123 y83.23.11.123  83.23.11.123  Translating "any" ^ % Invalid input detected at '^' marker. R7(config-ext-nacl)#per ip host any 83.23.11.123 83.23.11.123 \83.23.11.123 83.23.11.123 83.23.11.123 83.23.11.123 83.23.11.123  host 83.23.11.123 a host 83.23.11.123 n host 83.23.11.123 y host 83.23.11.123  R7(config-ext-nacl)#exit R7(config)#clas R7(config)#class-map match any % Ambiguous command: "class-map match any" R7(config)#class-map match any    -any sql R7(config-cmap)#match pro R7(config-cmap)#match protocol sq? sqlnet sqlserver R7(config-cmap)#match protocol sqln R7(config-cmap)#match protocol sqlnet R7(config-cmap)#match protocol sqlnet     s R7(config-cmap)#match protocol sqlserver R7(config-cmap)#exit R7(config)#class R7(config)#class-map TheSqlServer R7(config-cmap)#match acc R7(config-cmap)#match access-group mn R7(config-cmap)#match access-group mn  n R7(config-cmap)#match access-group name Prob2122 R7(config-cmap)#match clas R7(config-cmap)#match class-map sql R7(config-cmap)#exit R7(config)#pol R7(config)#policy-maop R7(config)#policy-maop  p R7(config)#policy-map Prob20to22 R7(config-pmap)#clas R7(config-pmap)#class TheSqlServer R7(config-pmap-c)#pri R7(config-pmap-c)#priority ? <8-2000000> Kilo Bits per second percent % of total bandwidth R7(config-pmap-c)#priority 56 ? <32-2000000> Burst in bytes R7(config-pmap-c)#priority 56 128 I/f FastEthernet1/0 class TheSqlServer requested bandwidth 56 (kbps), available only 0 (kbps) R7(config-pmap-c)#exit R7(config-pmap)#exzit ^ % Invalid input detected at '^' marker. R7(config-pmap)#exit R7(config)#policy-map Prob20to22                     no policy-map Prob20to22 R7(config)#policy-map Prob20to22 R7(config-pmap)#class TheSqlServer R7(config-pmap-c)#priority 56 128 R7(config-pmap-c)# R7(config-pmap-c)# class ftp R7(config-pmap-c)# bandwidth rem percent 25 R7(config-pmap-c)# class telnet R7(config-pmap-c)# bandwidth rem percent 25 R7(config-pmap-c)# class class-default R7(config-pmap-c)# bandwidth rem percent 50 R7(config-pmap-c)#! R7(config-pmap-c)#! R7(config-pmap-c)#interface FastEthernet0/0 ^ % Invalid input detected at '^' marker. R7(config)# service-policy output Prob20to22 ^ % Invalid input detected at '^' marker. R7(config)#! R7(config)#! service-policy output Prob20to22interface FastEthernet0/0 /0 1/0 R7(config-if)#interface FastEthernet1/0!  service-policy output Prob20to22 R7(config-if)#^Z R7# *Mar 15 19:28:05.380: %SYS-5-CONFIG_I: Configured from console by console R7#sh run | b class class-map match-all telnet match protocol telnet class-map match-any jpeg match protocol http mime "*jpg" match protocol http mime "*jpe" match protocol http mime "*jpeg" match protocol http url "*jpg" match protocol http url "*jpe" match protocol http url "*jpeg" class-map match-any sql match protocol sqlnet match protocol sqlserver class-map match-all TheSqlServer match access-group name Prob2122 match class-map sql class-map match-all S5Telnet match access-group name S5 match protocol telnet class-map match-all ftp match protocol ftp class-map match-all S5 match access-group name S5 class-map match-all notused --More--  ! ! policy-map Prob5 class jpeg shape average 1000000 class S5Telnet bandwidth 1000 class S5 police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob20to22 class TheSqlServer priority 56 128 class ftp bandwidth remaining percent 25 class telnet bandwidth remaining percent 25 class class-default bandwidth remaining percent 50 ! ! ! ! --More--  ! ! interface GigabitEthernet0/0 no ip address shutdown duplex auto speed auto media-type rj45 no keepalive ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto media-type rj45 no keepalive ! interface Serial0/0/0 bandwidth 1544 no ip address encapsulation frame-relay frame-relay interface-queue priority --More--  ! interface Serial0/0/0.1 point-to-point bandwidth 1544 ip address 180.40.7.65 255.255.255.224 ip ospf network broadcast ip ospf priority 0 frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! interface Serial0/0/0.2 point-to-point bandwidth 1544 ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 protocol ip 180.40.7.162 ! interface Serial0/0/1 no ip address shutdown ! interface Serial0/0/2 no ip address --More--   shutdown ! interface Serial0/0/3 no ip address shutdown ! interface FastEthernet1/0 ip address 208.28.1.1 255.255.255.0 duplex half speed auto max-reserved-bandwidth 100 service-policy output Prob20to22 ! interface FastEthernet1/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 duplex half speed auto vrrp 47 ip 180.40.7.133 glbp 47 ip 180.40.7.134 glbp 47 weighting track 1 decrement 100 standby 47 ip 180.40.7.132 standby 47 preempt --More--   service-policy output Prob5 ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ! ! ip http server no ip http secure-server ! ip access-list standard S5 permit 208.28.1.2 ! ip access-list extended Prob2122 permit ip host 83.23.11.123 any permit ip any host 83.23.11.123 ! priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! ! --More--   R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)# service-policy output Prob20to22interface FastEthernet1/0 !  service-policy output Prob20to22interface FastEthernet0/0 !  bandwidth rem percent 50class class-default  bandwidth rem percent 25class telnet  bandwidth rem percent 25class ftp priority 56 128class TheSqlServerpolicy-map Prob20to22 R7(config-pmap)#class clas- s-default R7(config-pmap-c)#far R7(config-pmap-c)#far  R7(config-pmap-c)#fair-queue ? <16-4096> Number Dynamic Conversation Queues R7(config-pmap-c)#fair-queue deconfigure bandwidth before issuing this command in this class R7(config-pmap-c)#no bandwidth remaining percent 50 R7(config-pmap-c)#no bandwidth remaining percent 50fair-queue  R7(config-pmap-c)#do sh pol         ^Z R7#sh p *Mar 15 19:31:02.696: %SYS-5-CONFIG_I: Configured from console by console R7#sh po R7#sh policy-map R7#sh policy-map int fa 1/0 FastEthernet1/0 Service-policy output: Prob20to22 Class-map: TheSqlServer (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Prob2122 Match: class-map match-any sql Match: protocol sqlnet 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol sqlserver 0 packets, 0 bytes 5 minute rate 0 bps Queueing Strict Priority Output Queue: Conversation 264 Bandwidth 56 (kbps) Burst 128 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: ftp (match-all) --More--   0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp Queueing Output Queue: Conversation 265 Bandwidth remaining 25 (%)Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Queueing Output Queue: Conversation 266 Bandwidth remaining 25 (%)Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: class-default (match-any) 42 packets, 4054 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any --More--   Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 256 (total queued/total drops/no-buffer drops) 0/0/0 R7# R7# R7# R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#fair-queue no bandwidth remaining percent 50fair-queue class class-defaultpolicy-map Prob20to22 R7(config-pmap)#policy-map Prob20to22fair-queue no bandwidth remaining percent 50fair-queue  ^ % Invalid input detected at '^' marker. R7(config-pmap)#fair-queue policy-map Prob20to22fair-queue no bandwidth remaining percent 50fair-queue class class-default R7(config-pmap-c)#class class-defaultfair-queue policy-map Prob20to22fair-queue  ? <16-4096> Number Dynamic Conversation Queues R7(config-pmap-c)#fair-queue 512 R7(config-pmap-c)#^Z R7#confi tsh policy-map int fa 1/0 *Mar 15 19:31:43.832: %SYS-5-CONFIG_I: Configured from console by console R7#sh policy-map int fa 1/0 FastEthernet1/0 Service-policy output: Prob20to22 Class-map: TheSqlServer (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: access-group name Prob2122 Match: class-map match-any sql Match: protocol sqlnet 0 packets, 0 bytes 5 minute rate 0 bps Match: protocol sqlserver 0 packets, 0 bytes 5 minute rate 0 bps Queueing Strict Priority Output Queue: Conversation 520 Bandwidth 56 (kbps) Burst 128 (Bytes) (pkts matched/bytes matched) 0/0 (total drops/bytes drops) 0/0 Class-map: ftp (match-all) --More--   0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp Queueing Output Queue: Conversation 521 Bandwidth remaining 25 (%)Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet Queueing Output Queue: Conversation 522 Bandwidth remaining 25 (%)Max Threshold 64 (packets) (pkts matched/bytes matched) 0/0 (depth/total drops/no-buffer drops) 0/0/0 Class-map: class-default (match-any) 49 packets, 4610 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any --More--   Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 512 (total queued/total drops/no-buffer drops) 0/0/0 R7# R7# R7# R7#sh run | b pol policy-map Prob5 class jpeg shape average 1000000 class S5Telnet bandwidth 1000 class S5 police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob20to22 class TheSqlServer priority 56 128 class ftp bandwidth remaining percent 25 class telnet bandwidth remaining percent 25 class class-default fair-queue 512 ! ! ! ! ! ! --More--   R7#conf t Enter configuration commands, one per line. End with CNTL/Z. R7(config)#pol R7(config)#policy-map R7(config)#policy-map Prob2324 R7(config-pmap)#clas R7(config-pmap)#class ftp R7(config-pmap-c)#pol R7(config-pmap-c)#police ? <8000-2000000000> Bits per second cir Committed information rate rate Specify police rate R7(config-pmap-c)#police 256000 ? <1000-512000000> Burst bytes bc Conform burst conform-action action when rate is less than conform burst pir Peak Information Rate R7(config-pmap-c)#police 256000 co R7(config-pmap-c)#police 256000 conform-action ? drop drop packet exceed-action action when rate is within conform and conform + exceed burst set-clp-transmit set atm clp and send it set-discard-class-transmit set discard-class and send it set-dscp-transmit set dscp and send it set-frde-transmit set FR DE and send it set-mpls-exp-imposition-transmit set exp at tag imposition and send it set-mpls-exp-topmost-transmit set exp on topmost label and send it set-prec-transmit rewrite packet precedence and send it set-qos-transmit set qos-group and send it transmit transmit packet R7(config-pmap-c)#police 256000 conform-action tr R7(config-pmap-c)#police 256000 conform-action transmit R7(config-pmap-c-police)#do sh pol % Ambiguous command: "sh pol" R7(config-pmap-c-police)#do sh polpolice 256000 conform-action transmit class ftp policy-map Prob2324\ dpolicy-map Prob2324opolicy-map Prob2324 policy-map Prob2324spolicy-map Prob2324hpolicy-map Prob2324 policy-map Prob2324 Policy Map Prob2324 Class ftp police cir 256000 bc 8000 conform-action transmit exceed-action drop R7(config-pmap-c-police)# R7(config-pmap-c-police)# R7(config-pmap-c-police)# R7(config-pmap-c-police)# R7(config-pmap-c-police)# R7(config-pmap-c-police)#exit R7(config-pmap-c)#exi R7(config-pmap)#class R7(config-pmap)#class TELNET % class map TELNET not configured R7(config-pmap)#class TELNET      telnet R7(config-pmap-c)#po R7(config-pmap-c)#police 56000 ? <1000-512000000> Burst bytes bc Conform burst conform-action action when rate is less than conform burst pir Peak Information Rate R7(config-pmap-c)#police 56000 1400 ? <1000-512000000> Burst bytes be Excess burst conform-action action when rate is less than conform burst pir Peak Information Rate R7(config-pmap-c)#police 56000 1400 >3500     3500 ? conform-action action when rate is less than conform burst R7(config-pmap-c)#police 56000 1400 3500 con R7(config-pmap-c)#police 56000 1400 3500 conform-action se R7(config-pmap-c)#police 56000 1400 3500 conform-action set-p R7(config-pmap-c)#police 56000 1400 3500 conform-action set-prec-transmit 1 ? exceed-action action when rate is within conform and conform + exceed burst R7(config-pmap-c)#police 56000 1400 3500 conform-action set-prec-transmit 1 e$0 1400 3500 conform-action set-prec-transmit 1 ex  R7(config-pmap-c)#$0 conform-action set-prec-transmit 1 exceed-action se R7(config-pmap-c)#$0 conform-action set-prec-transmit 1 exceed-action set-p R7(config-pmap-c)#$-prec-transmit 1 exceed-action set-prec-transmit 0 ? violate-action action when rate is greater than conform + exceed burst R7(config-pmap-c)#$-prec-transmit 1 exceed-action set-prec-transmit 0 R7(config-pmap-c-police)#$-prec-transmit 1 exceed-action set-prec-transmit 0 class telnet TELNETexi tdo sh policy-map Prob2324 Policy Map Prob2324 Class ftp police cir 256000 bc 8000 conform-action transmit exceed-action drop Class telnet police cir 56000 bc 1400 be 3500 conform-action set-prec-transmit 1 exceed-action set-prec-transmit 0 R7(config-pmap-c-police)# R7(config-pmap-c-police)# R7(config-pmap-c-police)# R7(config-pmap-c-police)# R7(config-pmap-c-police)# R7(config-pmap-c-police)# R7(config-pmap-c-police)# R7(config-pmap-c-police)#vi R7(config-pmap-c-police)#violate-action dr R7(config-pmap-c-police)#violate-action drop R7(config-pmap-c-police)#violate-action drop do sh policy-map Prob2324 Policy Map Prob2324 Class ftp police cir 256000 bc 8000 conform-action transmit exceed-action drop Class telnet police cir 56000 bc 1400 be 3500 conform-action set-prec-transmit 1 exceed-action set-prec-transmit 0 violate-action drop R7(config-pmap-c-police)# R7(config-pmap-c-police)# R7(config-pmap-c-police)#exi R7(config-pmap-c)#exit R7(config-pmap)#class class-default R7(config-pmap-c)#fa R7(config-pmap-c)#fair-queue ? <16-4096> Number Dynamic Conversation Queues R7(config-pmap-c)#fair-queue R7(config-pmap-c)#qu R7(config-pmap-c)#queue-limit ? <1-4096> Packets R7(config-pmap-c)#queue-limit 100 R7(config-pmap-c)#int s 1 0/0/0.1 R7(config-subif)#serv R7(config-subif)#service-policy ou R7(config-subif)#service-policy output Prob2324 CBWFQ : Not supported on subinterfaces R7(config-subif)#exit R7(config)#ma R7(config)#map R7(config)#map-cl R7(config)#map-class fra R7(config)#map-class frame-relay Prob2324 R7(config-map-class)#fr R7(config-map-class)#frame-relay ser R7(config-map-class)#frame-relay ser               ser R7(config-map-class)#service-policy ~map-class frame-relay Prob2324exit service-policy output Prob2324 R7(config-map-class)#int s 0/0/0/1  .1 R7(config-subif)#fram class Prob2324 R7(config-subif)#do sh run int s0/0/0/ sh run int s0/0/0/ ^ % Invalid input detected at '^' marker. R7(config-subif)#do sh run int s0/0/0/  Building configuration... Current configuration : 125 bytes ! interface Serial0/0/0 bandwidth 1544 no ip address encapsulation frame-relay frame-relay interface-queue priority end R7(config-subif)#int fa 0/0/0        s0/0/0/  R7(config-if)#fram R7(config-if)#frame-relay traf R7(config-if)#frame-relay traffic-shaping R7(config-if)#^Z R7#sh *Mar 15 19:39:29.184: %SYS-5-CONFIG_I: Configured from console by console R7#sh pol R7#sh policy-map R7#sh policy-map int s 0/0/0.1 Serial0/0/0.1: DLCI 703 - Service-policy output: Prob2324 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp police: cir 256000 bps, bc 8000 bytes conformed 0 packets, 0 bytes; actions: transmit exceeded 0 packets, 0 bytes; actions: drop conformed 0 bps, exceed 0 bps Class-map: telnet (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet police: cir 56000 bps, bc 1400 bytes, be 3500 bytes conformed 0 packets, 0 bytes; actions: --More--   set-prec-transmit 1 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 0 violated 0 packets, 0 bytes; actions: drop conformed 0 bps, exceed 0 bps, violate 0 bps Class-map: class-default (match-any) 2 packets, 168 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 16 (total queued/total drops/no-buffer drops) 0/0/0 R7#180.40.7.66 Translating "180.40.7.66" Trying 180.40.7.66 ... Open R3# R3# R3# R3# R3# R3# R3# R3# R3#q [Connection to 180.40.7.66 closed by foreign host] R7#180.40.7.66sh policy-map int s 0/0/0.1 Serial0/0/0.1: DLCI 703 - Service-policy output: Prob2324 Class-map: ftp (match-all) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol ftp police: cir 256000 bps, bc 8000 bytes conformed 0 packets, 0 bytes; actions: transmit exceeded 0 packets, 0 bytes; actions: drop conformed 0 bps, exceed 0 bps Class-map: telnet (match-all) 22 packets, 1021 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: protocol telnet police: cir 56000 bps, bc 1400 bytes, be 3500 bytes conformed 22 packets, 489 bytes; actions: --More--   set-prec-transmit 1 exceeded 0 packets, 0 bytes; actions: set-prec-transmit 0 violated 0 packets, 0 bytes; actions: drop conformed 0 bps, exceed 0 bps, violate 0 bps Class-map: class-default (match-any) 9 packets, 996 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Queueing Flow Based Fair Queueing Maximum Number of Hashed Queues 16 (total queued/total drops/no-buffer drops) 0/0/0 R7#sh run | b pol policy-map Prob5 class jpeg shape average 1000000 class S5Telnet bandwidth 1000 class S5 police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob2324 class ftp police 256000 conform-action transmit class telnet police cir 56000 bc 1400 be 3500 conform-action set-prec-transmit 1 exceed-action set-prec-transmit 0 violate-action drop class class-default fair-queue queue-limit 100 policy-map Prob20to22 class TheSqlServer priority 56 128 class ftp --More--   bandwidth remaining percent 25 class telnet bandwidth remaining percent 25 class class-default fair-queue 512 ! ! ! ! ! ! interface GigabitEthernet0/0 no ip address shutdown duplex auto speed auto media-type rj45 no keepalive ! interface GigabitEthernet0/1 no ip address shutdown duplex auto --More--   speed auto media-type rj45 no keepalive ! interface Serial0/0/0 bandwidth 1544 no ip address encapsulation frame-relay frame-relay traffic-shaping frame-relay interface-queue priority ! interface Serial0/0/0.1 point-to-point bandwidth 1544 ip address 180.40.7.65 255.255.255.224 ip ospf network broadcast ip ospf priority 0 frame-relay class Prob2324 frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! interface Serial0/0/0.2 point-to-point bandwidth 1544 ip address 180.40.7.161 255.255.255.224 --More--   ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 protocol ip 180.40.7.162 ! interface Serial0/0/1 no ip address shutdown ! interface Serial0/0/2 no ip address shutdown ! interface Serial0/0/3 no ip address shutdown ! interface FastEthernet1/0 ip address 208.28.1.1 255.255.255.0 duplex half speed auto max-reserved-bandwidth 100 service-policy output Prob20to22 --More--  ! interface FastEthernet1/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 duplex half speed auto vrrp 47 ip 180.40.7.133 glbp 47 ip 180.40.7.134 glbp 47 weighting track 1 decrement 100 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ! ! ip http server no ip http secure-server ! ip access-list standard S5 --More--   permit 208.28.1.2 ! ip access-list extended Prob2122 permit ip host 83.23.11.123 any permit ip any host 83.23.11.123 ! ! map-class frame-relay Prob2324 service-policy output Prob2324 priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! ! ! control-plane ! ! ! ! ! ! ! --More--   R7#confi t Enter configuration commands, one per line. End with CNTL/Z. R7(config)# R7(config)#pol R7(config)#policy-map R7(config)#policy-map Po rob2324 R7(config-pmap)#class R7(config-pmap)#class cas R7(config-pmap)#class cas  l R7(config-pmap)#class clas R7(config-pmap)#class class-deafu   fault R7(config-pmap-c)#po R7(config-pmap-c)#police 512 ^ % Invalid input detected at '^' marker. R7(config-pmap-c)#police 512000 R7(config-pmap-c-police)#exit R7(config-pmap-c)#exi R7(config-pmap)#exit R7(config)#map  -cal  la R7(config)#map-class fr R7(config)#map-class frame-relay Prob2324 R7(config-map-class)#f R7(config-map-class)#frame-relay cir ? <1-45000000> Applied to both Incoming/Outgoing CIR, Bits per second in Incoming CIR out Outgoing CIR R7(config-map-class)#frame-relay cir 600000 R7(config-map-class)#^Z R7# *Mar 15 19:46:11.004: %SYS-5-CONFIG_I: Configured from console by console R7#sh trafdf ^ % Invalid input detected at '^' marker. R7#sh trafdf  f Interface Se0/0/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 703 600000 9375 600000 0 125 9375 - Interface Se0/0/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 702 56000 875 7000 0 125 875 - R7#sh traffdfconfi t sh run | b pol policy-map Prob5 class jpeg shape average 1000000 class S5Telnet bandwidth 1000 class S5 police 5000000 conform-action set-prec-transmit 3 exceed-action set-prec-transmit 1 policy-map Prob2324 class ftp police 256000 conform-action transmit class telnet police cir 56000 bc 1400 be 3500 conform-action set-prec-transmit 1 exceed-action set-prec-transmit 0 violate-action drop class class-default fair-queue queue-limit 100 police 512000 policy-map Prob20to22 class TheSqlServer priority 56 128 --More--   class ftp bandwidth remaining percent 25 class telnet bandwidth remaining percent 25 class class-default fair-queue 512 ! ! ! ! ! ! interface GigabitEthernet0/0 no ip address shutdown duplex auto speed auto media-type rj45 no keepalive ! interface GigabitEthernet0/1 no ip address shutdown --More--   duplex auto speed auto media-type rj45 no keepalive ! interface Serial0/0/0 bandwidth 1544 no ip address encapsulation frame-relay frame-relay traffic-shaping frame-relay interface-queue priority ! interface Serial0/0/0.1 point-to-point bandwidth 1544 ip address 180.40.7.65 255.255.255.224 ip ospf network broadcast ip ospf priority 0 frame-relay class Prob2324 frame-relay interface-dlci 703 frame-relay ip tcp header-compression passive ! interface Serial0/0/0.2 point-to-point bandwidth 1544 --More--   ip address 180.40.7.161 255.255.255.224 ip helper-address 208.28.1.99 ip ospf network point-to-multipoint frame-relay priority-dlci-group 1 702 702 702 702 frame-relay interface-dlci 702 protocol ip 180.40.7.162 ! interface Serial0/0/1 no ip address shutdown ! interface Serial0/0/2 no ip address shutdown ! interface Serial0/0/3 no ip address shutdown ! interface FastEthernet1/0 ip address 208.28.1.1 255.255.255.0 duplex half speed auto max-reserved-bandwidth 100 --More--   service-policy output Prob20to22 ! interface FastEthernet1/1 ip address 180.40.7.131 255.255.255.224 ip helper-address 180.40.7.66 duplex half speed auto vrrp 47 ip 180.40.7.133 glbp 47 ip 180.40.7.134 glbp 47 weighting track 1 decrement 100 standby 47 ip 180.40.7.132 standby 47 preempt service-policy output Prob5 ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ! ! ip http server no ip http secure-server ! --More--  ip access-list standard S5 permit 208.28.1.2 ! ip access-list extended Prob2122 permit ip host 83.23.11.123 any permit ip any host 83.23.11.123 ! ! map-class frame-relay Prob2324 frame-relay cir 600000 service-policy output Prob2324 priority-list 1 protocol ip high tcp telnet priority-list 1 protocol ip low tcp www ! ! ! ! control-plane ! ! ! ! ! --More--   R7# RACK1AS>2 [Resuming connection 2 to r4 ... ] *Mar 15 18:50:52.120 R2#sh run int s0/0/0.2 Building configuration... Current configuration : 252 bytes ! interface Serial0/0/0.2 multipoint ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay class Prob3 frame-relay de-group 1 207 frame-relay map ip 180.40.7.161 207 broadcast frame-relay interface-dlci 207 end R2#conf t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#do map R2(config)#do map      map R2(config)#map-cl R2(config)#map-class fr R2(config)#map-class frame-relay Prob2526 R2(config-map-class)#fra R2(config-map-class)#frame-relay ci R2(config-map-class)#frame-relay cir 63 4000 R2(config-map-class)#fr R2(config-map-class)#frame-relay ad R2(config-map-class)#frame-relay adaptive-shaping d b R2(config-map-class)#frame-relay adaptive-shaping becn R2(config-map-class)#frame-relay adaptive-shaping becn                       ? adaptive-shaping Adaptive traffic rate adjustment, Default = none bc Committed burst size (Bc), Default = 7000 bits be Excess burst size (Be), Default = 0 bits cir Committed Information Rate (CIR), Default = 56000 bps congestion Congestion management parameters custom-queue-list VC custom queueing end-to-end Configure frame-relay end-to-end VC parameters fair-queue VC fair queueing fecn-adapt Enable Traffic Shaping reflection of FECN as BECN fragment fragmentation - Requires Frame Relay traffic-shaping to be configured at the interface level holdq Hold queue size for VC idle-timer Idle timeout for a SVC, Default = 120 sec interface-queue PVC interface queue parameters ip Assign a priority queue for RTP streams mincir Minimum acceptable CIR, Default = CIR/2 bps priority-group VC priority queueing tc Policing Measurement Interval (Tc) traffic-rate VC traffic rate voice voice options R2(config-map-class)#frame-relay             int s 0/0/0.1 R2(config-subif)#fram ma       do sh run int fa  s 0/0p/  /0.1 Building configuration... Current configuration : 161 bytes ! interface Serial0/0/0.1 multipoint ip address 180.40.7.67 255.255.255.224 ip ospf network broadcast ip ospf priority 0 frame-relay interface-dlci 203 end R2(config-subif)# frame-relay interface-dlci 203 R2(config-fr-dlci)#clas R2(config-fr-dlci)#class Prob2526 R2(config-fr-dlci)#^Z R2#s *Mar 15 19:54:18.612: %SYS-5-CONFIG_I: Configured from console by console R2#sh traf R2#sh traffic-shape Interface Se0/0/0 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 201 56000 875 7000 0 125 875 - Interface Se0/0/0.1 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 203 64000 1000 64000 0 125 1000 BECN Interface Se0/0/0.2 Access Target Byte Sustain Excess Interval Increment Adapt VC List Rate Limit bits/int bits/int (ms) (bytes) Active 207 64000 5000 64000 32000 125 1000 BECN R2#   R2# R2# R2# R2#sh run | b 0/0/0 interface Serial0/0/0 no ip address encapsulation frame-relay no fair-queue frame-relay traffic-shaping ! interface Serial0/0/0.1 multipoint ip address 180.40.7.67 255.255.255.224 ip ospf network broadcast ip ospf priority 0 frame-relay interface-dlci 203 class Prob2526 ! interface Serial0/0/0.2 multipoint ip address 180.40.7.162 255.255.255.224 ip ospf network point-to-multipoint frame-relay class Prob3 frame-relay de-group 1 207 frame-relay map ip 180.40.7.161 207 broadcast frame-relay interface-dlci 207 ! interface Serial0/0/1 ip address 180.40.7.2 255.255.255.224 --More--  ! interface Serial0/1/0 no ip address shutdown ! interface Serial0/1/1 no ip address shutdown ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ! ! no ip http server no ip http secure-server ! ! map-class frame-relay Prob3 frame-relay cir 64000 frame-relay bc 64000 frame-relay be 32000 --More--   frame-relay adaptive-shaping becn ! map-class frame-relay Prob2526 frame-relay cir 64000 frame-relay adaptive-shaping becn access-list 100 deny ospf any any access-list 100 permit ip any any ! ! ! ! control-plane ! ! ! ! ! ! dial-peer cor custom ! ! ! ! --More--